MyOxy portable oxygen can is India's first FDA approved disposable oxygen can with inbuilt mask. It is very useful in case a person is suffering from breathlessness caused due to various reasons like high altitude, pollution or any respiratory problem
Silway Silicone Surfactant represents a new, highly effective non-ionic surfactant that can be tank mixed to aid or modify the action of agrichemicals or the physical characteristics of mixtures. It reduces the surface tension of water from 72 dynes/cm to 20.5 dynes/cm. Depending on goals, surfactants can advance spray mixture performance by improving spreading, penetration, deposition, wetting, sticking and moisture retention. Silway offers multiple products and packaging options and is effective at low use rates ranging from 0.015-0.150% depending on the application.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
Prime Flex 900 MV is a single-component, water-activated polyurethane foam for sealing cracks and joints in concrete structures. It has a medium viscosity, expands up to 600% when cured, and forms a flexible closed-cell foam. It is used to inject into actively leaking cracks and joints in water tanks, dams, and other concrete structures to create a watertight seal. Proper storage, mixing, application procedures and safety precautions should be followed.
Intumescent paint should be applied with a commercial grade airless paint sprayer to achieve the smoothest finish and maximum material per coat. It can be applied over bare or primed surfaces only unless approved by building officials, and any existing paint must be clean without cracking, peeling or flaking. At least 24 hours of curing time is recommended between coats, and 48 to 72 hours is better to allow moisture to escape. Intumescent paint should not be diluted with water as it can change the fire retardant formula.
Vedic Pac-Systems installed a vacuum conveying, batching and extruder feeding system at Bhavin Industries in Daman. The system accurately conveyed and weighed carbon black over 40 meters without product attrition or deposition on pipes. Additionally, Vedic Pac-Systems commissioned a soft gelatin encapsulation machine at Sun Pharma in Halol with features like automatic fill weight adjustment and 21CFR compliance.
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
MyOxy portable oxygen can is India's first FDA approved disposable oxygen can with inbuilt mask. It is very useful in case a person is suffering from breathlessness caused due to various reasons like high altitude, pollution or any respiratory problem
Silway Silicone Surfactant represents a new, highly effective non-ionic surfactant that can be tank mixed to aid or modify the action of agrichemicals or the physical characteristics of mixtures. It reduces the surface tension of water from 72 dynes/cm to 20.5 dynes/cm. Depending on goals, surfactants can advance spray mixture performance by improving spreading, penetration, deposition, wetting, sticking and moisture retention. Silway offers multiple products and packaging options and is effective at low use rates ranging from 0.015-0.150% depending on the application.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
Prime Flex 900 MV is a single-component, water-activated polyurethane foam for sealing cracks and joints in concrete structures. It has a medium viscosity, expands up to 600% when cured, and forms a flexible closed-cell foam. It is used to inject into actively leaking cracks and joints in water tanks, dams, and other concrete structures to create a watertight seal. Proper storage, mixing, application procedures and safety precautions should be followed.
Intumescent paint should be applied with a commercial grade airless paint sprayer to achieve the smoothest finish and maximum material per coat. It can be applied over bare or primed surfaces only unless approved by building officials, and any existing paint must be clean without cracking, peeling or flaking. At least 24 hours of curing time is recommended between coats, and 48 to 72 hours is better to allow moisture to escape. Intumescent paint should not be diluted with water as it can change the fire retardant formula.
Vedic Pac-Systems installed a vacuum conveying, batching and extruder feeding system at Bhavin Industries in Daman. The system accurately conveyed and weighed carbon black over 40 meters without product attrition or deposition on pipes. Additionally, Vedic Pac-Systems commissioned a soft gelatin encapsulation machine at Sun Pharma in Halol with features like automatic fill weight adjustment and 21CFR compliance.
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic
TinSil® 70-Series Silicone Elastomers are two-component,
room temperature curing mold rubbers. TinSil silicone elastomers are
condensation-cure, tin-catalyzed systems that cure to flexible rubbers.
TinSil molds have high tear strength, excellent chemical resistance,
good release properties and resistance to high temperatures. These
molds are a great choice for casting polyesters, epoxy and polyurethane
resins, polyurethane foams, plaster, waxes and many other materials.
This document provides information on TinSil 70-Series silicone rubbers for mold making. It describes the products as two-part, room temperature curing silicone elastomers that cure to flexible molds with high tear strength, chemical resistance and heat resistance. The document provides details on product selection, model preparation, mixing, curing, and using the molds for various casting applications. It also lists physical properties, features, and accessories for the silicone rubber products.
The document outlines a presentation on evaporation given by Malaika Jabeen and Maryam Akhtar for their Separation Tech course. The presentation covers the purpose of evaporation, its mechanism, factors that affect it, evaporation under reduced pressure, differences from distillation, equipment used, applications, and pros and cons. It provides an overview of the key topics and concepts to be discussed in their presentation on evaporation.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
Powder coatings have several advantages over liquid coatings including being more environmentally friendly by emitting near zero VOCs, producing less hazardous waste, and not requiring an oven for solvent evaporation. Powder coatings can also produce thicker, more uniform coatings in a single layer without runs or sags. They provide excellent corrosion resistance, mechanical performance, and a wide variety of finish options. Additionally, powder coating production has lower capital and operating costs than liquid coating lines due to less space needs, easier application requiring less training, and the ability to recycle overspray.
Polytek’s Floor Patch Paste is a premium quality, 2-part epoxy, patching compound. It provides epoxy
high build, maximum toughness, flexibility, excellent chemical resistance in a quick-drying paste.
silicone adjuvant surfactant ,trisiloxano,trisiloxane ,spraying silicone surfactant from pingxiang vitalforce firm,trisiloxano from pingxiang vitalforce firm,agricultural silicone surfactant, package 200L or 1L or as customer design
Polygel® Liquid Rubbers are without equal for making
brush-on or sprayed blanket molds. Polygel products consist of two
parts (A and B) that immediately thicken to a brushable or trowellable
consistency after mixing. These non-sag products are especially
useful for application to vertical or overhead surfaces. For brush-on
application, use Polygel 35. In circumstances where spray application
is best (e.g., large surface areas where brushing may be impractical),
use Polygel Spray 35 or Spray 50. Polygel rubber molds are suitable
for casting plaster, concrete and waxes, as well as limited casting with
polyester, epoxy and polyurethane resins. Since Polygel products bond
well to many surfaces, they can also be used as adhesives and sealants.
Oxygen generator plant knows why it is in high demandTrimech India
Growth of Industries have highly affected the demand of Oxygen Generator Plant in industries. Lets Know from this PPT Why Oxygen Generator Plant is in high demand?
SPRAYCRETE is supplied in powder form, specially developed and designed to meet the demand for efficient and multifold properties desired at guniting job sites. It is suitable admixture for guniting and shotcreting operations. Accelerates the rate of hardening gives perfect water proofing. It have excellent bonding properties which reduces the wastage during operation of guniting, shotcreting or sprayed job, can be do a thick layer in single operation.
By guniting with adding the admixture, it accelerats the hardening process by the reactive components rapidly combine with cement particles to setting and hardening process thereby making the mortar or concrete rock hard in minutes after jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cement.
Vortex Industrial Technology Co., Ltd produces conical screw blenders for mixing and blending powders in industries such as chemicals, pharmaceuticals, food, and plastics. The document describes a 3000L conical screw mixer that features a slow-turning auger screw for gently lifting and mixing powders, granules, pastes, and slurries. The conical screw mixer can also be used for vacuum feeding and drying functions, with vacuum helping to reduce the risk of overheating products during drying.
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic.
Evergreen Surfacing Technologies manufactures eco-friendly surfacing products for residential, commercial, and industrial use. Their products include asphalt re-surfacing, broom finish, micro topping, and spray texture which can turn worn concrete or asphalt into a beautiful and durable surface without hazardous chemicals. The company provides information on their products, services, projects, and how to calculate return on investment from using their products which offer a warranty and can save on annual maintenance costs compared to traditional options.
: FormRub Series Liquid Rubbers consist of two parts (A
and B), which, after mixing, cure at room temperature to flexible rubber.
Molds made with FormRub are excellent for casting concrete, plaster
and wax. In addition, when coated with a proper release agent, FormRub
molds can be used to cast various resins and foams. FormRub Liquid
Rubbers are formulated for good economy with high performance and
durability
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
Ernesto Levy: Convenience business area overview. Suominen CMD 2017Suominen Corporation
Convenience business area overview presentation by Ernesto Levy, Senior Vice President, Convenience at Suominen. Held in Suominen Capital Markets Day on 10 May 2017.
Your best options for dust and erosion control in australiarstsolutions
Areas with heavy traffic can benefit from using products that bind materials together. In this case, the results can last for up to 6 months. Carry back can be another issue that increases costs over time. You can use a product that is applied onto the trucks that transport materials.
Enhancing Sustainability with Soil Stabilization & Dust Control ProductEnvirotac Inc.
Soil stabilization and dust control products have emerged as crucial tools in this endeavor, offering innovative ways to fortify and protect soil while minimizing environmental impact.
This document discusses concrete admixtures. It begins with an introduction, then discusses the history of admixtures. It notes that while admixtures have been used since ancient times, their development increased in the late 20th century in countries like Japan, Germany, the US, and Europe. The document outlines the need for admixtures to modify concrete properties and ensure quality. It then describes various types of admixtures including plasticizers, super plasticizers, retarders, accelerators, and air-entraining admixtures. It provides details on how different admixtures work and their common uses. In conclusion, it states that super plasticizers and air-entraining admixtures are most widely used today to
A spray adjuvant is a substance added to agricultural sprays that helps improve the performance of the main active ingredient such as pesticides, herbicides, and fungicides. Spray adjuvants work by reducing the surface tension of water, which helps the spray solution spread evenly and penetrate plant leaves and soils more effectively. This leads to better coverage and penetration of the active ingredient, more uniform application, increased rain fastness, and reduced runoff. The document provides details on how TIS Silicone Adjuvant works as a spray adjuvant and recommends its uses for various agricultural applications including herbicide, fungicide, and insecticide application as well as for improving soil penetration and controlling dry spot.
This document provides an overview of different elastomeric impression materials used in dentistry, including their composition, setting reactions, properties, advantages, and disadvantages. It discusses polysulfide rubber, condensation silicone, addition silicone, and polyether impression materials. It also covers general properties like working and setting times, dimensional stability, reproduction of details, disinfection, tear strength, biocompatibility, and effects of mishandling. Recently, visible light-cured polyether urethane dimethacryl materials have been introduced as well.
This document provides information on TinSil 70-Series silicone rubbers for mold making. It describes the products as two-part, room temperature curing silicone elastomers that cure to flexible molds with high tear strength, chemical resistance and heat resistance. The document provides details on product selection, model preparation, mixing, curing, and using the molds for various casting applications. It also lists physical properties, features, and accessories for the silicone rubber products.
The document outlines a presentation on evaporation given by Malaika Jabeen and Maryam Akhtar for their Separation Tech course. The presentation covers the purpose of evaporation, its mechanism, factors that affect it, evaporation under reduced pressure, differences from distillation, equipment used, applications, and pros and cons. It provides an overview of the key topics and concepts to be discussed in their presentation on evaporation.
Poly-Optic® 14-Series Casting Resins are two-part,
polyurethane systems formulated specifically for applications where
optical clarity is required. Castings are clear like water; however,
PolyColor dyes can be added to obtain clear, colored castings. PolyOptic systems, with low viscosities and long pot-lives, provide for easy
mixing, excellent detail penetration, and easy degassing, through
vacuum or pressure casting techniques, for bubble-free castings.
Powder coatings have several advantages over liquid coatings including being more environmentally friendly by emitting near zero VOCs, producing less hazardous waste, and not requiring an oven for solvent evaporation. Powder coatings can also produce thicker, more uniform coatings in a single layer without runs or sags. They provide excellent corrosion resistance, mechanical performance, and a wide variety of finish options. Additionally, powder coating production has lower capital and operating costs than liquid coating lines due to less space needs, easier application requiring less training, and the ability to recycle overspray.
Polytek’s Floor Patch Paste is a premium quality, 2-part epoxy, patching compound. It provides epoxy
high build, maximum toughness, flexibility, excellent chemical resistance in a quick-drying paste.
silicone adjuvant surfactant ,trisiloxano,trisiloxane ,spraying silicone surfactant from pingxiang vitalforce firm,trisiloxano from pingxiang vitalforce firm,agricultural silicone surfactant, package 200L or 1L or as customer design
Polygel® Liquid Rubbers are without equal for making
brush-on or sprayed blanket molds. Polygel products consist of two
parts (A and B) that immediately thicken to a brushable or trowellable
consistency after mixing. These non-sag products are especially
useful for application to vertical or overhead surfaces. For brush-on
application, use Polygel 35. In circumstances where spray application
is best (e.g., large surface areas where brushing may be impractical),
use Polygel Spray 35 or Spray 50. Polygel rubber molds are suitable
for casting plaster, concrete and waxes, as well as limited casting with
polyester, epoxy and polyurethane resins. Since Polygel products bond
well to many surfaces, they can also be used as adhesives and sealants.
Oxygen generator plant knows why it is in high demandTrimech India
Growth of Industries have highly affected the demand of Oxygen Generator Plant in industries. Lets Know from this PPT Why Oxygen Generator Plant is in high demand?
SPRAYCRETE is supplied in powder form, specially developed and designed to meet the demand for efficient and multifold properties desired at guniting job sites. It is suitable admixture for guniting and shotcreting operations. Accelerates the rate of hardening gives perfect water proofing. It have excellent bonding properties which reduces the wastage during operation of guniting, shotcreting or sprayed job, can be do a thick layer in single operation.
By guniting with adding the admixture, it accelerats the hardening process by the reactive components rapidly combine with cement particles to setting and hardening process thereby making the mortar or concrete rock hard in minutes after jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cement.
Vortex Industrial Technology Co., Ltd produces conical screw blenders for mixing and blending powders in industries such as chemicals, pharmaceuticals, food, and plastics. The document describes a 3000L conical screw mixer that features a slow-turning auger screw for gently lifting and mixing powders, granules, pastes, and slurries. The conical screw mixer can also be used for vacuum feeding and drying functions, with vacuum helping to reduce the risk of overheating products during drying.
Poly 74-Series Polyurethane Rubbers consist of two
parts (A and B), which, after mixing, cure at room temperature to
flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make
durable, easy-releasing molds for casting plasters and waxes without
release agents. When Poly 74-Series molds are properly prepared, they
are also excellent for casting concrete and various resins, such as epoxy,
polyester, polyurethane and acrylic.
Evergreen Surfacing Technologies manufactures eco-friendly surfacing products for residential, commercial, and industrial use. Their products include asphalt re-surfacing, broom finish, micro topping, and spray texture which can turn worn concrete or asphalt into a beautiful and durable surface without hazardous chemicals. The company provides information on their products, services, projects, and how to calculate return on investment from using their products which offer a warranty and can save on annual maintenance costs compared to traditional options.
: FormRub Series Liquid Rubbers consist of two parts (A
and B), which, after mixing, cure at room temperature to flexible rubber.
Molds made with FormRub are excellent for casting concrete, plaster
and wax. In addition, when coated with a proper release agent, FormRub
molds can be used to cast various resins and foams. FormRub Liquid
Rubbers are formulated for good economy with high performance and
durability
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
Ernesto Levy: Convenience business area overview. Suominen CMD 2017Suominen Corporation
Convenience business area overview presentation by Ernesto Levy, Senior Vice President, Convenience at Suominen. Held in Suominen Capital Markets Day on 10 May 2017.
Your best options for dust and erosion control in australiarstsolutions
Areas with heavy traffic can benefit from using products that bind materials together. In this case, the results can last for up to 6 months. Carry back can be another issue that increases costs over time. You can use a product that is applied onto the trucks that transport materials.
Enhancing Sustainability with Soil Stabilization & Dust Control ProductEnvirotac Inc.
Soil stabilization and dust control products have emerged as crucial tools in this endeavor, offering innovative ways to fortify and protect soil while minimizing environmental impact.
This document discusses concrete admixtures. It begins with an introduction, then discusses the history of admixtures. It notes that while admixtures have been used since ancient times, their development increased in the late 20th century in countries like Japan, Germany, the US, and Europe. The document outlines the need for admixtures to modify concrete properties and ensure quality. It then describes various types of admixtures including plasticizers, super plasticizers, retarders, accelerators, and air-entraining admixtures. It provides details on how different admixtures work and their common uses. In conclusion, it states that super plasticizers and air-entraining admixtures are most widely used today to
A spray adjuvant is a substance added to agricultural sprays that helps improve the performance of the main active ingredient such as pesticides, herbicides, and fungicides. Spray adjuvants work by reducing the surface tension of water, which helps the spray solution spread evenly and penetrate plant leaves and soils more effectively. This leads to better coverage and penetration of the active ingredient, more uniform application, increased rain fastness, and reduced runoff. The document provides details on how TIS Silicone Adjuvant works as a spray adjuvant and recommends its uses for various agricultural applications including herbicide, fungicide, and insecticide application as well as for improving soil penetration and controlling dry spot.
This document provides an overview of different elastomeric impression materials used in dentistry, including their composition, setting reactions, properties, advantages, and disadvantages. It discusses polysulfide rubber, condensation silicone, addition silicone, and polyether impression materials. It also covers general properties like working and setting times, dimensional stability, reproduction of details, disinfection, tear strength, biocompatibility, and effects of mishandling. Recently, visible light-cured polyether urethane dimethacryl materials have been introduced as well.
Spreader Sticker helps chemical controls be more effective by adding their distribution and adhesion of them. It also opens pores, allowing further of the chemical control to enter. Because using Spreader Sticker increases effectiveness, it decreases chemical operation. It’s been an ideal summer for bug infestations with the hot, dry weather, and numerous people that are coming into the garden center have been complaining that they’ve been spraying and spraying, but that their chemicals or diseases just don’t feel to be working.
The document discusses the history and development of dental bonding systems. It describes the characteristics of each generation of bonding systems from the 1970s to the present. First generation systems only bonded to enamel, while later generations developed methods for bonding to dentin as well by etching and using hydrophilic primers. Current bonding systems include total-etch systems that etch both enamel and dentin with acid prior to bonding, and self-etch systems that incorporate acidic primers to etch the tooth structure during bonding application.
The rubber processing aid is a kind of material that can improve rubber processing properties by adding a small amount without chemical reaction. It improves properties like plasticity, dispersity, flowability and lubricity. Adding a small amount of rubber processing aid can change processability during mixing, calendering, extrusion and other processes. It has little impact on physical properties of vulcanized rubber.
1. Elastomers are polymers that are crosslinked and easily stretched and recover their original shape when stress is released. There are four main types: polysulfides, condensation silicones, polyethers, and addition silicones.
2. Polysulfides impressions involve mixing a base paste with a catalyst paste containing lead dioxide. The lead dioxide reacts with sulfide groups on the polymer chains, lengthening and crosslinking them into a network.
3. Condensation silicones involve crosslinking a polydimethylsiloxane polymer with alkyl silicates using stannous octoate. Ethyl alcohol is a byproduct, causing shrinkage. They require a putty
The document discusses zinc phosphate cement, including its composition, setting reaction, manipulation, properties, applications, advantages, and disadvantages. It notes that zinc phosphate cement powder contains zinc oxide and the liquid contains phosphoric acid. The cement sets via a reaction between the zinc oxide and phosphoric acid. Modifications discussed include copper cement, which contains copper oxide, and has bactericidal properties, and silico-phosphate cement, which is a hybrid of zinc phosphate and silicate materials.
Specialty Lubricants For The Farming CommunityStephen Climer
Texas Refinery Corp is a manufacturer of specialty lubricants and cleaning products based in the US since 1922. The document provides information on their products for farming and agriculture, including MOLY XL PRO-SPEC synthetic blend oil, HYDRATE PLUS NF surfactant, TIRESEAL puncture sealant, POLY TEMP grease for cotton pickers, and DZL-PEP fuel additive. Customer testimonials praise the performance of these products in improving equipment reliability, reducing costs, and increasing productivity on farms.
BOSTIK - Adhesive Solutions for Flexible Packaging-Presentation version.pdfSHRIPAD AMATE
The document summarizes Bostik's adhesive solutions for flexible packaging. It discusses key trends in flexible packaging like convenience, small portions, and reclosability. It then outlines Bostik's portfolio of adhesives that address these trends, including reclosable seals, heat seals, cold seals, and lamination adhesives. It presents new product innovations in these areas and emphasizes Bostik's commitment to sustainability and circular economy goals through membership in the CEFLEX initiative.
Root canal sealers are used with obturating materials to seal the root canal system. They serve functions like filling irregularities, sealing lateral canals, and assisting with microbial control. Ideal sealers provide an excellent seal, adhere well to canal walls and filling material, are radiopaque, and more. Common types include zinc oxide-eugenol, calcium hydroxide, and resin-based sealers. Resin sealers like AH Plus and AH 26 offer advantages like good adhesion, antibacterial properties, and biocompatibility but must be mixed properly to avoid adverse reactions. Proper application of sealers within the canal is important to avoid irritation.
Green Life Group has developed a cleaning product called Blue Sky that safely cleans grease, oil, and dirt from floors without contaminating water systems. The product breaks down hydrocarbons in runoff to make it safe for drainage. Green Life Group seeks to lead the market in providing environmentally friendly cleaning products that protect both the environment and human health. Their line of Green Up products safely and effectively clean a wide range of surfaces while being biodegradable and reducing exposure to toxic chemicals.
Green Life Group has developed a cleaning product called Blue Sky that safely cleans grease, oil, and dirt from floors without contaminating water systems. The product breaks down hydrocarbons in runoff to make it safe for drainage. Green Life Group sees its role as a leader in developing green products that protect the environment and human health. Its line of Green Up products are concentrated cleaners and sterilizers that are biodegradable, non-toxic alternatives to traditional chemicals.
The document provides step-by-step instructions for cleaning and maintaining a dental isolation adapter. It describes disassembling the device by removing the mouthpiece, control head, vacuum levers, and separating the upper and lower halves of the control head. It then explains cleaning the suction channels, inspecting and lubricating the o-rings, and reassembling the device by reattaching the vacuum levers, control head halves and control head to the coupler. The goal is to properly disinfect between patients to avoid cross-contamination.
- PolyPoxy epoxy clays are two-component, room temperature curing systems that form a soft dough-like consistency when mixed and cure to a hard solid.
- They offer an accurate and efficient method for duplicating shapes and engineering changes can be made more easily compared to laminated shapes.
- The epoxy clay is applied in layers up to 2 inches thick and allowed to cure at room temperature before use. Applying too thick can cause warping or fire due to the exothermic curing reaction.
Practical Methods to Manufacture Sustainable Plastics Products I. Partial Foa...Ata Zad, Ph.D.
Sustainability is a crucial word to follow for plastics industry.
A very general, yet precise, explanation of Sustainability would be producing a product with using the least amount of resources.
Partial foaming is one of the ways to achieve this objective in plastics industry.
Read the article to see the benefits for yourself.
Nanex is an innovative company that develops protective coatings using nano technology. They have multiple product lines for cleaning and protecting different surfaces, including Clean & Coat for non-porous surfaces like glass and metal, Always Dry for absorbent surfaces like textiles and leather, and solvent-based formulas for wood and stone. The products combine nano polymers with solvents or water to penetrate materials on a molecular level, filling imperfections and creating hydrophobic, oleophobic, scratch resistant and self-cleaning surfaces.
Similar to PASS Agricultural silicone surfactant from Profirst (20)
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART KALYAN CHART
The Most Inspiring Entrepreneurs to Follow in 2024.pdfthesiliconleaders
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Enhancing Adoption of AI in Agri-food: IntroductionCor Verdouw
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Efficient PHP Development Solutions for Dynamic Web ApplicationsHarwinder Singh
Unlock the full potential of your web projects with our expert PHP development solutions. From robust backend systems to dynamic front-end interfaces, we deliver scalable, secure, and high-performance applications tailored to your needs. Trust our skilled team to transform your ideas into reality with custom PHP programming, ensuring seamless functionality and a superior user experience.
Cover Story - China's Investment Leader - Dr. Alyce SUmsthrill
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
High-Quality IPTV Monthly Subscription for $15advik4387
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?
Tired of chasing down expiring contracts and drowning in paperwork? Mastering contract management can significantly enhance your business efficiency and productivity. This guide unveils expert secrets to streamline your contract management process. Learn how to save time, minimize risk, and achieve effortless contract management.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
63662490260Kalyan chart, satta matta matka 143, satta matka jodi fix , matka boss OTC 420, Indian Satta, India matka, matka ank, spbossmatka, online satta matka game play, live satta matka results, fix fix fix satta namber, free satta matka games, Kalyan matka jodi chart, Kalyan weekly final anl matka 420
2. Main contents
The work way of pesticides on surface of plants
Super Spreader “PASS“
Agricultural silicone surfactant
How to use “PASS” ?
6/5/2017
“PASS” Showcase
Other PASS series
4. If use pesticides directly on targets
Can not be absorbed immediately.
It’ll take hours to be permeate into
the organizations of the plant.
Less than 0.03% finaly acts on the targets.
6/5/2017
Easily lost to the field and
washed away by rain, which
cause amounts of run-off.
9. 6/5/2017
Possibility of adding surfactants
“Skin absorption” (left) can be changed into
“Stomatal absorption” (right) only if the surface
tension less than 25mN/m.
Surfactant, which can decrease the surface
tension of solvents, can be used as the additives.
10. Chosen surfactants are as follow:
New-style:
Silicone surfactant
Typical:
Op-10 & JFC (Polyethoxylated fatty alcohols)
6/5/2017
11. 29.80.10%
310.05%
1% Abamectin EC+JFC
340.10%
32.40.05%1% Abamectin EC +
OP-10
35.82000 times1% Abamectin EC
72.4Water
Surface tension
(mN/m)
Diluted times or
concentration
Solution
under 25 mN/m
Experiment data of different surfactants
6/5/2017
22.20.10%
22.60.05%
1% Abamectin EC + X
Agricultural silicone surfactant
19. 6/5/2017
Super Spreader “PASS”
PASS:
Trade name Active content Package
PASS 100%
100g/bottle, 1kg/bottle
20kg/pail, 200kg/drum
1MT/IBC
Chemical name: Polyether modified trisiloxane
The super wetting and spreading ability can be comparable to
famous brands from Dow Corning, GE & Evonik…
20. Add in tank mix(more popular)
Easy & fast way to use
6/5/2017
Add in the formulation of Agrochemicals
Better PH range between 6-8
22. 6/5/2017
1/3 pesticides saved
1/3 water saved
1/3 labour saved
3*15 L
water
2*15 L
water
Three
sprayers
Two
sprayers
3* 2*
When using “PASS” …
Money
saved
30. 6/5/2017
PASS Showcase
Drop of water touched slightly
by toothpick with very small dosage of PASS
Drop of waterDrop of water
Drop with PASS spreading quickly Drop with PASS finally cover
whole area of leave
34. 6/5/2017
Other PASS Series
PASS-HB
( Tank mix adjuvant for Glyphosate, 50 % )
PASS-Powder
( For powder formulations of agrochemicals, 50% )
PASS-LF
( Super Spreader with low foam for Agrochemicals, 100% )
PASS-PH
( Super Spreader for Agrochemicals, PH range 4-9, 100% )