1. ADONIES P. GARCIA
Mobile No.: +966502670316
Email: doni.garcia1020@gmail.com
Senior Piping Designer / Area Lead
EXPERIENCE SUMMARY:
With 9 years of substantial knowledge and experience in the field of Piping Engineering and
Design.
Worked in ISO 9001 environment, and involved in Refinery, Petrochemical, Oil & Gas and
LNG Terminal Plant Projects.
Function as Area Lead by planning, organizing and leading within the higher level of
productivity in the assigned Area to meet the project delivery schedule.
Field/Site experience by providing engineering support at site. Involve in approval and
checking of test packages, line checking, as-built drawing preparation, punch list closing and
construction work support.
Responsible for the preparation of piping layout, stress iso, squad checking, bill of materials,
preparation of piping plans, preparation of piping information, produced piping isometrics,
construction site field works and other piping related works.
Designed, modeled and prepared detailed plant designs using the following software’s:
SP3D, PDS Intergraph, Microstation, SPPID, AutoCAD, Smart Plant Review, Navisworks,
Smart Sketch and Quick Plant.
SPECIFIC EXPERIENCE:
Senior Piping Designer I / Area Lead / Field Engineer
JGC International (Al khobar, KSA) - (November 2012 – Present)
Project Involved:
NAUG Project (Turaif, KSA)
June 2015 – Present
Function as Area Lead for Surface Processing Facility Area.
Communicate and interfaces with General Engineering Contractor and with other project
design and engineering disciplines.
Involve in preparation of Plot Plan, Conceptual Layout and Client model review,
Review and comment on Piping Information, Vendor drawings and data sheets as
required.
Provides engineered support for the assembly of piping, equipment, and related items
including updating of associated piping data i.e. P&ID, Line List and Isometric.
Performs continuity check of Isometrics and P&ID’s ensuring each document match up
each other for SPF Area.
2. Sadara Petrochemical Plant Project (Jubail, KSA)
February 2014 - May 2015
Assigned as a Field Engineer for Piping.
Responsible in Line checking, approval & checking of test package and punch closing.
Construction support by preparing Site Instruction, As-built drawing and Field change
sheet.
Communicate and interfaces with construction piping supervisor, other discipline
supervisor and client.
Preparing punch list for test package prior to testing for Field Engineering.
Sadara Petrochemical Plant Project (Al khobar, KSA)
November 2012 - January 2014
Function as a designer which execute the assigned design and drafting activities in
accordance with the quality system in force within the Discipline, job requirements, and
time schedule.
Developing 3D model based on the study layouts, 2D Piping General Arrangement
Drawings and Plot plan and Equipment layouts according to the established Technical
Work Practices.
Prepare Isometric sketches for all Stress critical lines with the possible support locations
and assist the stress engineer to carry out stress analysis.
Assist, remodel and update the model based on the Internal, Client reviews, latest Supplier
information and Isometric checking comments and maintain the clash free model.
Piping Designer III / Piping Design Engineer
Fluor Daniel Inc. Philippines - (February 2007 – November 2012)
Project Involved:
Singapore LNG Project (Jurong Island, Singapore)
July 2010 - November 2012
Assigned as Piping Designer and back-up Discipline Application Specialist (DAS) at the
same time.
As a designer, was involved in the design and development of aboveground piping of LNG
Tanks and Pipe rack Area.
As a back-up DAS, I was involved in the project set-up and support for SP3D utilities.
3. IPS II Expansion Project (Fluor Shanghai, China)
November 2009 – July 2010
Assigned as Piping Design Engineer as a support for Fluor China office.
Keeps the designers up to date on the latest procedures and practices related to PDS and
PDS job requirements, through the distribution of PDS Memos, weekly meetings, and
meetings with other task forces.
Teach PDS modeling for Chinese new grad.
Helped the PDS designers with their problems regarding PDS and Microstation
applications.
Helped the Automation Group and other discipline with project set-up. Generated and
always update the piping electronic job book. Was involved in checking Microstation
deliverables.
Transferred PDS files to and from the home office to keep both offices current, on “Work
Share” projects.
Saudi Kayan Petrochemical Project (KSA)
February 2007 – June 2009
Under go six months training in piping design for project preparation.
Generated general G.A. drawings and Stress plan drawings.
Provided stress sketches.
Developed equipment models of NSPS, MSS, and MPS.
In charge for the development of steam trap piping, battery limit pipelines, and blowdown
area.
Check isometrics generated from Plant Design System (PDS) against the P&ID's.
COMPUTER SKILLS:
-PDS -Smart Plant 3D -Smart Plant Review
-Microstation -Autocad -Smart Sketch
-Quick Plant -SPPID -Navisworks
SEMINARS AND TRAININGS:
Piping Design Course Phase I
Piping Design Course Phase II
- PDS - Piping Design
- PDS - Equipment Modeling
- PDS – Isometric Drawing Manager / Drawing Manager
Basic Stress Training
Piping DAS/RDB Training (Advance PDS)
Smart Plant 3D (Next Generation Execution Platform)
EDUCATION:
Bachelor of Science in Mechanical Engineering
MAPUA INSTITUTE OF TECHNOLOGY
Registered Mechanical Engineer
License No: 0064895