Industrial radiography is a useful method used in industries for material testing and inspection.

1. Industrial radiography is a useful method used in industries for material testing and
inspection.
Crucial Information About Industrial Radiography
A commonly used quality testing technique is industrial radiography that makes use of
high energy radiations to take clear cut image of objects. This is a common procedure
deployed by medical professionals to check body organ conditions and bone fracture.
However, its use is widespread across industries to test several materials. It is of great
importance in the field of engineering as the method provides reveals concealed flaws
in materials. For this testing purpose, high energy radiation used is gamma rays or X­
rays.
Gamma rays are quite intense of all possible radiations that can be used here. It has
high penetration power and can make through almost everything. The sources for
gamma radiations used are cobalt­60 and iridium­192. Typically, this method of
material testing is employed in various industries for assessing pipelines, welds, high
capacity storage vessels as well as pressure vessels. High frequency radiations are used
in industries for the analysis of solid material such as rectangular containers, ceilings
as well as floors and cylindrical solids.
Using this technology, material testing can be performed in several ways. The very
first method is a panoramic approach where the radiation source is placed in the centre
of the test sample. Consequently, the method only suits the vessels which are hollow,
like pipes and tanks. Recording of the images are done to a different place, outside the
surface of the test sample. Overall methodology clearly states that this industrial

2. Radiography New England can be impractical at few instances – like in case when
the centre of the test object is difficult or impossible to reach.
There is another approach which is somewhat similar to the previous one, but doesn’t
require the radiation source to be placed in the centre of the test sample. You have a
third method as well wherein the radiation source is placed on the exterior of the test
sample. In the fourth approach, the test sample is a flat object such as metal plate.
Whatever the method is, a radiographic plate is used to record the exposure. In
addition to the above mentioned methods, there are various other methods too which
are commonly used by professionals. The selection of the radiographic method depends
on the attributes of the sample.
A radiographic film is used to record the image which in turn reveals exposures based
on the amount of radiations that made to the spot of the film. Industry professionals
need to find quality services depending on their specific requirements. Consult experts
at various Testing Laboratories New England and you will the best­ever solution.
Contact Us
Address ­ 95 First Street ­ Post office box 868 ­ Bridgewater,
Zip Code ­ MA 02324
You Can Also Call Us At– 508.697.6068 OR Fax ­ 508.697.6154
Log In At Our Website At www.abcndt.com