FULL ENJOY - 9953040155 Call Girls in Chhatarpur | Delhi
Anchor Allied Factory LLC - Catalogue
1. CH3
C
Si
Si
H2N
R
O
O
O
Building The Future, Restoring The Past
O
NH
NH
(C=O)
(C=O)
www.anchorallied.com
MANUFACTURERS OF SILICONE,ACRYLIC & POLYURETHANE SEALANTS,WATERPROOFING COATINGS,AEROSOL PRODUCTS ADHESIVE TAPES AND HOMECARE PRODUCTS
Years
2. Waterproofing Coating Polyurethane Foam Spray Paint Silver Cloth DuctTape
P.E ProtectionTape
Aluminum FoilTape
Crepe Paper MaskingTape
PVC Pipe WrappingTape Contact Adhesive Steel Epoxy
HOME CARE PRODUCTS
Sanitizer Spray Disinfectant Sanitizer Pocket Sanitizer Clear Surface Sanitizer
Domestic Insect Killer Room Airfreshener Deodorant
Automatic Dispenser - Air freshener
Automatic Dispenser - Sanitizer Spray
Penetrating Oils
Super Glue
PVC Cement
Lubricating Spray
Hybrid Sealants Grab Adhesive Firestop Sealants
Silicone Sealants PU Sealants Polysulphide Sealants Acrylic & Duct Sealants
“Anchor Allied Factory was incorporated in Sharjah, U.A.E. in the year 1995. From a small unit the company
has grown to become one o
f the largest manu
facturers o
f Silicone Sealants, PU Sealants, PU Foam, Spray
Paint, Other Aerosols, Adhesive T
apes, and other allied products in the whole o
f Middle East.
During its development, Anchor Allied persistently combined independent innovations and integration
o
f internationally advanced resources to develop the best quality products. The company’s in-house R&D
department assisting constantly in improving the product quality, which itsel
f has become a benchmark for
products o
f its kind in markets across the globe. The products are manu
factured on the most modern plant
with global acceptability.
Our goods are exported to more than 59 countries worldwide mostly to the whole Middle East, Africa, CIS
Countries, Indian Subcontinent, Far East, South East Asia & South America. The company also maintains
sales o
f
fices in Saudi Arabia, Egypt Ukraine, Latin America and India
for e
f
ficient customer support in the region.”
3. DUBAI CENTRAL LABORATORY APPROVED
1
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
SILICONE SEALANT
ASMACO 2500 is a single component acetic cure silicone sealant which vulcanizes on exposure to
moisture in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all
common construction and glazing application. It is easy to apply and offers excellent adhesion to a
variety of non porous substrates such as glass, glazed ceramic tiles and aluminum. It is resistant to
ozone, ultra-violet radiation and temperature extremes. Can be applied in all temperatures.
G2100 is a single component acetic cure silicone sealant which vulcanizes on exposure to moisture
in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all common
construction and glazing application. It is easy to apply and offers excellent adhesion to a variety of
non porous substrates such as glass, glazed ceramic tiles and aluminum. It is resistant to ozone,
ultra-violet radiation and temperature extremes. Can be applied in all temperatures.
GENERAL PURPOSE
SILICONE SEALANT GENERAL PURPOSE
ASMACO SEALANTS
Available Colours: White / Clear /Black
Packaging: 24pcs / ctn
Available Colours: White / Clear /Black
Packaging: 24pcs / ctn
4. DUBAI CENTRAL LABORATORY APPROVED
DUBAI CENTRAL LABORATORY APPROVED
SILICONE SEALANT
ASMACO 2540 is a one part moisture curing silicone suitable for general construction sealing applications and
is highly resistant to moisture. It has excelent resistance to ageing, shrinkage, cracking and discolouring.
ASMACO 2540 high quality performance silicone sealant is ideal for aluminium / glass and standard glazing,
curtain wall joining, metal to metal joints and duct work sealing, sealing door / windows frames, sealing shop
windows and green houses, sealing works in air conditioning. The antifungal properties make this product
suitable for sanitary applications.
ASMACO GP SILICONE SEALANT Is a high quality single component acetic cure silicone sealant
which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible
elastomeric sealant. It is suitable for all common construction and glazing application. It is easy to
apply and offers excellent adhesion to a variety of non porous substrates such as glass, glazed
ceramic tiles and aluminum. It is resistant to ozone, ultra-violet radiation and temperature extremes.
Ideal for cladding and composite panel applications.
2
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
SILICONE SEALANT
ANTIFUNGAL
PREMIUM GRADE
Available Colours: White / Clear / Black
(Customized colours are also available against orders)
Packaging: 24pcs / ctn
DUBAI CENTRAL LABORATORY APPROVED
ASMACO GLASS SEALANT is a high quality single component room temperature curing acetoxy
silicone sealant designed to meet ISO 11600 25 LM specification. The product gives superior
adhesion on glass and glazing surfaces. The product is resistant to Ozone, UV and temperature
extremes. Suitable for all indoor and outdoor applications. Ideal for glass fixing, glazing and fish
tank assembling.
SILICONE SEALANT
GLASS SEALANT
Available Colours: Clear / White / Black
Packaging : 24pcs / ctn
ASMACO 2781 ACETOXY SILICONE is a one-part, silicone sealant which has good adhesion to a
range of non-porous surfaces including glass, aluminum, painted surfaces and composite boards. It
offers excellent resistance to ageing, shrinkage, cracking and discoloring. The product meets the
requirements of international standards viz. ASTM C 920 and ISO 11600. Suitable for aluminium, glass,
formica and other non porous construction elements.
SILICONE SEALANT
GLAZING AND WEATHER SEALANT
Available Colours: Clear / White / Black
Packaging : 24pcs / ctn
Available Colours: White/Clear/Black/Grey/Beige/Cream/Brown
(Customized colours are also available against orders)
Packaging: 24pcs / ctn
5. DUBAI CENTRAL LABORATORY APPROVED
3
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO 2650 is a single component neutral curing silicone sealant which vulcanizes on exposure
to moisture in the air at room temperature, to produce a flexible low modulus elastomeric sealant. It
has excellent adhesion to most common building materials like glass, glazed surface, painted wood,
aluminium and other metals, masonry, concrete, GRP, UPVC and some plastics. ASMACO 2650 is
non corrosive hence suitable for application where bare metals are used. Excellent resistance to
weathering, moisture, ozone etc... Suitable for interior and exterior applications.
WEATHER SEALANT
ASMACO 2670 is a single part neutral curing silicone weather sealant with unprimed adhesion to most of the
porous and non-porous construction materials like concrete masonary, UPVC, glass, EPDM, aluminium,
polycarbonate, acrylic plastics, wood etc. The non-staining property of the product makes it suitable for marble
and granite applications. The product is tested and certified for ASTM C 920, Type S, Grade NS, Class 50, Use
NT,M,G. This product is suitable for cladding, glazing and curtain wall applications. ASMACO 2670 is a low VOC
product that meets green
building requirements.
ALL WEATHER SEALANT
NEUTRAL SILICONE SEALANT
SILICONE SEALANT
Available Colours: White / Clear / Black / Grey
(Customized colours also available against orders)
Packaging: Cartridges - 24pcs / ctn & Sausages 600ml X 20pcs / ctn
Available Colours: White / Clear / Black
(Customized colours are also available against orders)
Packaging: 24pcs / ctn
ASMACO MIRROR SEALANT is a CLEAR neutral-curing, non corrosive, low modulus, 100%
silicone sealant with outstanding adhesion that provides a permanent flexible bond for mirrors to
painted surfaces, plaster, metal, wood or plywood.
MIRROR SEALANT
ASMACO 2677 is a single component, neutral cure silicone sealant which is particularly suitable for
indoor and outdoor applications. This is a high bonding, high modulus sealant and offers durable
adhesion to most porous and non porous substrates including glass, metals, coated and painted
metals, plastic wood, concrete etc. The product is resistant to Ozone, UV and temperature extremes.
ASMACO 2677 is developed for use as a secondary sealant in a dual-sealed insulating glass unit.
Insulating glass sealant can bond the individual components, forming a weather-resistant unit.
INSULATION GLASS SEALANT
SILICONE SEALANT
Available Colours: BLACK
(Customized colours are also available against orders)
Packaging: 24pcs / ctn
SILICONE SEALANT
Available Colours: Clear
Packaging : 24pcs / ctn
6. 4
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
SILICONE SEALANT
ASMACO 2800 is a single component, low odour neutral cure Silicone Sealant which is particularly
suitable for indoor and outdoor applications. This is high bonding, low modulus sealant and offers
durable adhesion to most porous and non porous substrates including masonry, brick, aluminium,
UPVC, polycarbonate, polyacrylate, wood, EPDM, glass and glazed surfaces. The product confirms to
ISO 11600 - F&G - 25 LM and is resistant to Ozone, UV and temperature extremes. The product is
formulated to resist mold and mildew where high humidity and temperature exist. No primer required
for most substrates. 2800 is a low VOC product that meets green building requirements.
SILICONE SEALANT
ASMACO 2880 is a single component low odour neutral cure silicone sealant which is particularly
suitable for structural glazing and cladding applications. This is a high bonding sealant and offers a
durable adhesion to most porous and non porous construction materials including glass, metals and
most plastics. The product is non-corrosive and is resistant to ozone, UV and temperature extremes.
2880 is a low VOC product that meets green building requirements.
JOINT SEALANT
STRUCTURAL GLAZING
ASMACO 2890 SL is a single component, low odour neutral cure Self-leveling silicone sealant for
concrete and concrete to asphalt pavement joints. This is a high bonding sealant and offers a
durable adhesion to most porous and non-porous construction material. The product is non
corrosive and is resistant to Ozone, UV and temperature extremes. ASMACO 2890-SL is a Self-Level-
ing Silicone Joint Sealant that cures to an ultra-low modulus silicone rubber upon exposure
to atmospheric moisture. The cured silicone rubber remains flexible from -30ºC to 185ºC. Asphaltic
paving materials have low tensile strengths.
Available Colours: White / Grey / Black
(Customized colours are also available against orders)
Packaging: Cartridges - 24pcs / ctn & Sausages 600ml X 20pcs / ctn
SILICONE SEALANT
ASMACO 2860 STRUCTURAL SEALANT is a single component, low odour neutral cure silicone sealant which is particularly
suitable for structural glazing and cladding applications. This is a high bonding sealant and offers a durable adhesion to most
porous and non-porous construction materials including glass, metals and most plastics. The product is non corrosive and is
resistant to Ozone, UV and temperature extremes. No surface pre-treatment or primer required for most substrates.
STRUCTURAL SEALANT
Available Colours: Black
Packaging: Sausages 600ml X 20pcs / ctn
Available Colours: Black
Packaging: Cartridges - 24pcs / ctn & Sausages 600ml X 20pcs / ctn
Available Colours: Grey
(Customized colours are also available against orders)
Packaging: 200 Litre Drum
NEUTRAL CURE SELF LEVELING SEALANT
7. DUBAI CENTRAL LABORATORY APPROVED
DUBAI CENTRAL LABORATORY APPROVED
5
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
SILICONIZED DUCT SEALANT
ACRYLIC CAULK
ASMACRYL 52 is a single component gun grade sealant formulated from high quality acrylic
emulsions and special fillers. Hence, the product is easy to apply and efficiently seals joints of AC
ventilation and ducts. It is ready to use air drying sealant and effectively seals internal and external
joints. Asmacryl 52 can be used for sealing all low movement joints. Asmacryl 52 is asbestos free and
will not adversely effect plastic materials or corrode metals. It does not have any adverse effect to
human skin. Ideal for use on HVAC ducting application, sealing of duct holes, insulation foam joints,
aluminium, MS or galvanized metal ducts etc. Asmacryl 52 is a low VOC product and meets the
green building requirements.
ACRYLIC SEALANT
ASMACRYL 55 is a single component gun grade fire retardant sealant based on acrylic emulsions,
suitably formulated by using special additives and chemicals. The product is easy to apply and seals
joints between construction parts subjected to moderate stress. It is ready to use and seals internal
and external joints in porous substrates such as concrete, plastics, asbestos, cement, brick work
and wood. Asmacryl-55 can be used for sealing all low movement joints and restricts the passage
of fire and smoke from room to room and to escape routes. The sealant is water-based and free from
chlorine. The product is paintable. Asmacryl 55 is a low VOC product and meets the green building
requirements.
B2-FIRE RETARDANT
SILICONIZED ACRYLIC
Available Colours: Grey / White
Packaging: 24pcs / ctn
Available Colours: White / Grey
Packaging: 24pcs / ctn
ACRYLIC DUCT SEALANT
ACRYLIC CAULK (ASMACRYL 47) is a mono component elastoplastic sealing putty based on
acrylic aqueous dispersion for joints between construction parts subject to moderate stress.
ASMACRYL 47 is ready for use and seals internal or external joints on porous surfaces such as
concrete, plaster, asbestos, cementitious material, brickwork, cement, wood. It is not recommended
for joints in continuous contact with water. Asmacryl 47 is a low VOC product which meets green
building requirements. Accomodates up to 20% joint movement.
Available Colours: White / Grey
Packaging: 24pcs / ctn
ASMACO RTV SEALANT HIGH TEMPERATURE
ASMACO HI–TEMP RTV SILICONE is a single component, non-sag, 100% RTV silicone sealant that
cures to tough, rubbery solid at room temperature upon reaction with moisture in the atmosphere.
This high temperature silicone is formulated to withstand temperatures up to 300o
C. It can be used
in numerous sealing and bonding applications.
Available Colours: Grey / Red
(Customized colours are also available against orders)
Packaging: 24pcs / ctn
8. DUBAI CENTRAL LABORATORY APPROVED
CIVIL DEFENCE APPROVED
DUBAI CENTRAL LABORATORY APPROVED
CIVIL DEFENCE APPROVED
FIRESTOP SEALANTS
6
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
SILICONE SEALANT
FIRESTOP
INTUMESCENT ACRYLIC SEALANT
ASMACO FIRESTOP SILICONE SEALANT is a single component high performance gun grade fire-stop
weather sealant based on fire resistant Silicone formulation. The sealant is suitably formulated by using special
additives and chemicals. The product is fire resistant, easy to apply and seals joints between construction parts
subjected joint movement.
ASMACO firestop silicone sealant helps to protect combustible and non-combustible penetrations for up to 4
hours fire rating. This product can be used for sealing all movement joints up to 50% and restricts the passage
of fire and smoke from room to room and to escape routes. Since the sealant is low VOC, it is user friendly and
confirms to green building requirements.
ASMACO INTUMESCENT ACRYLIC SEALANT is a single component high performance gun grade
intumescent (fire-stop) sealant based on fire resistant Acrylic formulation. The sealant is suitably formulated by
using special additives and chemicals. The product is fire resistant, easy to apply and seals joints between
construction parts and penetrations.
Intumescent acrylic sealant helps to protect combustible and non-combustible penetrations for up to 4 hours
fire rating. This product restricts the passage of fire and smoke from room to room and to escape routes. Since
the sealant is low VOC, it is user friendly and confirms to green building requirements.
Available Colours: Red
Packaging: 12pcs / ctn
Available Colours: White
(Customized colours also available against orders)
Packaging: 12pcs / ctn
9. DUBAI CENTRAL LABORATORY APPROVED
7
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO PU 72 WINDSCREEN SEALANT
ASMACO PU 72 is an excellent, non-sag, one-component, flexible and high performance polyurethane
adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. As it is non
conductive, allowing the correct bonding to glass incorporating radio antenna or additional electrical
equipment. ASMACO PU 72 is a versatile elastic Polyurethane based Adhesive for the bonding of front
side and rear glasses used in commercial/industrial vehicles. Suitable for elastic structural bonding
(assembly of various materials which are subjected to high thermal and dynamic stress) in the transporta-
tion industry. It bonds and seals at the same time and has a short tack free and cutting time. It has a
good green strength and initial load bearing capacity. It adds torsional stiffness to the final assembly,
dampens vibration and sound and is resistant to shock / impact. Short drive away time of 3 hours.
ASMACO PU 81 BUS TRUCK RAIL SEALANT
ASMACO PU 81 is a high-quality multipurpose non-sag one component polyurethane sealant suitable
for various bonding and sealing applications in transport industry like bus, truck, rail, boats etc. It cures
on exposure to atmospheric humidity to form a durable elastomeric bond which can withstand torsional
and impact loads. The product meets the requirements of ASTM C920 types and ISO 11600
Classification F25 HM. It bonds well to a wide variety of substrates and is suitable for making permanent
elastic seals of high adhesive strength. Suitable substrate materials are timber, metals, metal primers
and paint coatings and ceramic materials . ASMACO PU 81 is suitable for elastic structural bonding
(assembly of various materials which are subjected to high thermal and dynamic stress) in the
transportation industry. It’s high viscosity guarantees a very high initial tack and is suitable for the
application of large surface glasses typical in the transport industry.
ASMACO PU 90 is a moisture-curing, one component, polyurethane-based, non-sag elastomeric low modulus sealant formulated
to suit most demanding construction sealing applications. It is highly resilient and has excellent recovery characteristics. It can
function under wide range of temperatures. Used in sealing movement joints in precast concrete construction, balcony parapets,
bridge culverts, retaining walls, etc. for caulking joints around windows, doors, skirting, walls and floor joints.
ASMACO PU 90 is tested and certified to meet the most demanding sealant specifications viz ASTM C 920 and ISO 11600. It is
low VOC, meets green building requirements and is safe to be applied in concrete potable water tanks.
POLYURETHANE SEALANTS
Available Colours: Black
Packaging: Aluminium Cartridges 12pcs / ctn
Available Colours: White / Grey
Packaging: Aluminium Cartridges 12pcs / ctn or Sausages 20pcs / ctn
Available Colours: Grey / Beige / White
(Customized colours also available against orders)
Packaging: 600ml X 20pcs / ctn
ASMACO PU 90 CONSTRUCTION JOINT SEALANT
10. 8
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
AUTOMOTIVE ADHESIVE SEALANT
ANCHORSEAL AUTOMATE Sealant is a one-component, high modulus STP sealant with excellent
adhesion to sheet iron, steel. Best suited for most of the bonding and sealing application in
automobiles. Short tack free and curing time. Non-sag-exceptional Thixotropic, non-sticky, no
shrinkage, improved storage stability, easy to gun, can be easily smoothed, over-paintable, non-cor-
rosive and high- initial load. Increase torsional stiffness of the final assembly. Vibration and sound
damping during windscreen bonding
ANCHORSEAL AUTOMATE is a single product that meets almost all automotive applications includ-
ing panel bonding, sealing, glazing and wind screen fixing.
ASMACO INSTANT GRAB ADHESIVE is super strong flexible and waterproof adhesive with a quick
grab capability, seals and repairs almost everything. It is capable to hold objects in place instantly
and cures in 24 -48 hours. Suitable for underwater bonding, sealing and wet area applications. Can
be used to stop water leaks without draining. It is mildew, UV and weather resistant. Meets green
building requirements.
Suitable for : All types of metals, wood, foam, rubber, tiles, glass, stones, concrete, plaster, dry wall,
fibre glass, composites, most of the plastics, and much more.
SOLVENT BASE GRAB ADHESIVE
N3 NO NEED NAILS is a solvent base grab adhesive used for bonding mirrors, decorative panels,
profiles, skirting boards, star nosings, tiles, parquet blanks, veneers, MDF, insulating panels, all metal
surfaces, gypsum, concrete, bricks and similar type of substrates. This product is suitable for both
interior and exterior application.
ADVANTAGES: Nail free fixing. Ideal for bonding mirrors. All purpose adhesive for interior decorations
and construction industries. Easy to use. High filling capacity, fills gap on uneven substrates till 5mm.
Excellent bonding strength on all type of substrates like concrete, steel, wood, plaster boards, glass
and most synthetic materials. Fast setting. No rusting. No more wall piercing. Withstands
temperatures ranging from -20°C to +80°C.
ASMACO ALL IN 1 HIGH-TECH SEALANT is an easy-to-use, high strength, elastomeric product
which can serve as both adhesive and sealant. It is a waterproof sealant and adhesive making it
suitable to be used in wet areas. It is a low odour formulation which free of isocyanates, acids and
other harmful chemicals. It cures in 24-48 hours and reaches maximum strength in 7 days. The
product is so versatile that it can be used in many areas like DIY, construction bonding and sealing,
automotive glazing, windscreen sealing and body building, marine applications, repair works etc.
The product bonds to almost all surfaces except low energy surfaces eg. PE, PP, PTFE etc. In short,
it is an all purpose adhesive sealant. The non-corrosive nature of the product makes it suitable for
mirror bonding application. The product is designed to meet green building regulations.
ANCHORSEAL AUTOMATE
INSTANT GRAB
NO NEED NAILS (N3)
Available Colours: Black / White / Grey
Packaging: Cartridges - 12pcs / ctn
Available Colours: Beige
Packaging: Cartridges - 12pcs / ctn
Available Colours: Black / White / Grey
Packaging: Cartridges - 12pcs / ctn
GRAB ADHESIVE SEALANT
HYBRID SEALANT
ALL IN ONE
Available Colours: Black / White / Grey
Packaging: Cartridges - 24pcs / ctn
11. POLYURETHANE FOAM
ASMACO UNIVERSAL MULTI FOAM & ASMACO GOLD UNIVERSAL MULTIFOAM
TRIPLE EXPANDING PU FOAM SEALANT
One component and ready to use moisture curing polyurethane foam mainly used for sealing of
insulation sheets, filling of joints and cavities in walls and ceilings. Closed cell structure, resistant to
water absorption. Excellent thermal insulation characteristics and very good acoustic characteristics.
Suitable for sealing high volume low movement gaps. CFC free.
PU foams create one of the world's most popular, energy-efficient and versatile insulations. These
foams can significantly cut energy costs. Because the foam has a high R-Value (high resistance to
conducting heat), it is widely used for insulation purposes and bonding. Fixing and insulation of
door and window frames. Filling and sealing gaps, joints and cavities. Filling of penetrations in
walls. Insulating electrical outlets and water pipes. Polyurethane foams can be applied on-site to
seal gaps and cover irregular shapes.
Available Sizes: 330ml / 500ml / 750ml
Available Types: Hand grade / Gun grade
Packaging: 12pcs / ctn
Available Sizes: 750ml
Available Types: Gun grade / Hand grade
Packaging: 12pcs / ctn
DUBAI CENTRAL LABORATORY APPROVED
9
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
14
UNIVERSAL POLYURETHANE FOAM
HIGH YIELD POLYURETHANE FOAM
12. 10
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
PU ADHESIVE FOAM
ASMACO GOLD FIRE RETARDANT B2 FOAM with CFC Free Propellant. I’ts a ready to use,
one-component, self expanding, fire retardant sealing foam based on 1k Polyurethane technology. It
hardens at ambient temperatures to a low density mass by reacting with atmospheric moisture and
on curing it exhibits excellent adhesion to wood, metals door/window frames, glass, painted surfaces,
some plastics, concrete, plasters etc... Microcellular structure of the foam reveals a majority closed
cell structure, hence cured foam is resistant to water absorption. It has excellent thermal insulation
characteristics and can be used for insulating hot/cold water piping, refrigerating systems etc.
FIRE RETARDANT PU FOAM (B2)
Bonding of thermal insulation panels on facades (ETICS systems - lightweight method) Bonding EPS
boards in thermal insulation systems, bonding mineral wool in thermal insulation systems. Compatible
with all ETICS (External Contact insulated Systems). Significantly reduce the risk of valve obstruction
and increased gas tension, as the product of a long service life and usability is intended to provide
both. Due to it’s strong and lasting adhesion to polystyrene, it is widely used in construction
materials.
•Foamed polystyrene • concrete • plaster • brick • wood • cement• rigid PVC • bitumen sheets
• Solid Polyurethane foams
Available Sizes: 750ml
Available Types: Hand grade / Gun grade
Packaging: 12pcs / ctn
Available Sizes: 750ml
Available Types: Hand grade / Gun grade
Packaging: 12pcs / ctn
Available Sizes: 750ml
Available Types: Gun grade
Packaging: 12pcs / ctn
FIRE RETARDANT PU FOAM (B1)
ASMACO GOLD PU FIRE RETARDANT B1 FOAM is a quick setting single component polyurethane
foam with fire retardant properties. Due to its high degree of fire rating slow down the passage of
flames and smoke and provides a fire rated seal around window and door frames. It cures at ambient
temperature by reacting with atmospheric moisture and on curing it exhibits excellent adhesion to
wood, metals door/window frames, glass, painted surfaces, some plastics, concrete, plasters etc...
Due to its closed cell structure, cured foam is resistant to water absorption. Cured foam dries rigid
and can be trimmed, shaped and sanded. It has excellent thermal insulation characteristics and can
be used for insulating hot/cold water piping, refrigerating systems etc.
4 hr. RATING
2 hr. RATING
ETICS / EIFS ADHESIVE
DUBAI CENTRAL LABORATORY APPROVED
CIVIL DEFENCE APPROVED
DUBAI CENTRAL LABORATORY APPROVED
CIVIL DEFENCE APPROVED
13. PITCH MODIFIED PU COATING ASMACOAT WP 900
PURE PU COATING ASMACOAT WP 810
ALIPHATIC COATING ASMACOAT WP 936
WATERPROOFING COATING
ASMACOAT WP 900 is a liquid applied, coal tar modified single-component moisture
curing polyurethane coating. It is designed to form a seamless, elastomeric waterproofing
membrane. When fully cured ASMACOAT WP 900 forms a permanently flexible waterproof
lining to most of building surfaces including reinforced concrete, block works, brick works,
cement render, plaster boards, and fibre reinforced cement boards.
It has excellent properties like high elasticity, very good crack bridging and impermeability
to water vapour which makes it capable of effectively waterproofing even in the most
demanding conditions.
ASMACOAT WP 936 is an aliphatic, one component, liquid applied, moisture curing,
polyurethane surface and waterproofing coating. ASMACOAT WP 936 is ultra violet light
stable and will retain its surface gloss from glossiness even after prolonged exposure to
sunlight.
ASMACOAT WP 810 is a liquid applied, single-component moisture-curing polyurethane
coating. It is designed to form a seamless, elastomeric waterproofing membrane. When fully
cured ASMACOAT WP 810 forms a permanently flexible waterproof lining to most building
surfaces including reinforced concrete, block works, brick works, cement render, plaster board
and fibre reinforced cement. The properties like high elasticity, very good crack bridging and
impermeability to water vapour make it capable of effectively waterproofing even in most
demanding conditions. It is an advanced state of water proofing system and offers tangible,
cost saving benefits over conventional sheet and bitumen based waterproofing systems.
Available Colours: Black
Packaging: 20 Litres Drum
Available Colours: White/Black/Grey
(Customized colours also available against orders)
Packaging: 20 Litres Drum
Available Colours: Black
Packaging: 20 Litres Drum DUBAI CENTRAL LABORATORY APPROVED
11
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
14
14. 12
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ANCHORSEAL 963 is a two part polysulphide sealant available in self-level-
ing pouring grade and gun grade consistency. It is a polysulphide sealant
which effectively seals all joints subject to structural movement as well as
non-moving joints against ingress of water.
Grades available:
Anchorseal 963 PG – Pouring grade - 4 litres set x 4 pcs / ctn
Anchorseal 963 GG – Gun grade - 2.5 litres set x 6 pcs / ctn
ANCHORSEAL 963 POLYSULPHIDE SEALANT
ANCHOR SEAL WATER STOP SPRAY
• Special Colours are available based on customer requirements
Sizes : 400ml (12pcs / ctn) / 100ml (24pcs / ctn)
Colours: White / Black / Grey / Terracotta
ANCHORSEAL WATER STOP is easy to use, rubberized protective coating
designed to seal leaks and cracks. Provides a water tight, flexible seal
prevents moisture penetration and corrosion. Excellent for chimneys, roof
leak, boat, metal, concrete masonry, fiberglass, skylights, gutters, kitchen
sink and much more.
15. 13
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO SPRAY PAINT
SPRAY PAINTS (COLOURS OF YOUR CHOICE)-Quick Dry Acrylic Based Spray Paint, gives bright
finish, makes surface smooth, good to use both for interior and exterior applications. Highly
recommended for use on automobiles, cycles and steel surfaces, wooden furniture, plastic articles,
blinds, and other similar objects. Available in various colours. ASMACO SPRAY PAINTS provide
good hiding power, coverage and protection against corrosion.
ACRYLIC SPRAY PAINT PROTECTIVE AND DECORATIVE
ARTISTIC
HIGH TEMPERATURE SPRAY PAINT
Colour Available: White / Red / Grey / Matt Black / Silver
Packaging: 12pcs / ctn
Packaging: 12pcs / ctn
Packaging: 12pcs / ctn
GRAFFITI SPRAY PAINT
ASMACO GRAFFITI SPRAY PAINT with its exceptional size and manageability experimental
initiative is designed for graffiti, sign painting and high precision general decoration, thanks to its low
pressure and its valve. Made from acrylic base, with an incredibly fast drying time. Retains its color
when exposed to the elements due to the high quality of its components.
HIGH TEMP SPRAY PAINT has a very good thermal resistance ranging from 400°C - 600°C. The
paint contains silicone resin along with high quality pigment. Quick drying, smooth finish. Ideal for
Interior and exterior application. Most suitable for chimney, barbecues, engines and motorcycles,
furnace, stove oven etc. The paint is non fading, non-yellowing, weather resistant and high coverage
without running or excessive thickness. The product is CFC Free.
16. 14
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO STYROFOAM SPRAY PAINT is a new product line that creates detail while educating,
inspiring and driving innovation into schools, clubs, craft and hobby projects!
It is easy to apply and can be used on many kinds of surfaces like styrofoam brand foam, paper,
glass, wood, metal, leather, and ABS plastic. It is not suitable for rubber or flexible types of vinyl
because it will not dry on these surfaces; it will remain tacky to the touch. It will not adhere to
polyethylene or polypropylene. It has super flow and coverage. Asmaco Styrofoam foam spray
paint is lead free.
STYROFOAM SPRAY PAINT
Packaging: 12pcs / ctn
Packaging: 12pcs / ctn
ASMACO GLITTER SPRAY PAINT offers an intense sparkling finish for any craft or decorative
project. Our Glitter paint also provides a full coverage of radiant shimmer for many surfaces
including wood, metal, wicker, glass, ceramic, pottery, craft foam, paper, plastic and more.
Provides full-coverage durability for indoor decorating and home décor.
• Intense Shimmer Finish
• Multi- Surface Use
• Creates a unique on-trend glitter finish
• High intensity glitter formula gives a multi-dimensional effect
• Creates a sparkling finish
• Indoor use only
• Ideal for scrapbook projects
• Buildable glitter paint offers a full, vibrant shimmer with a multi-dimensional look
• Multi surface paint resists stains and scratches, shake well before use to mix glitter pigment
• Interior use on accent pieces, holiday decorations and many more
• Formulated to create an intense sparkling finish over a base coat of similar color
ASMACO GLITTER SPRAY
ASMACO FIXATIVE SPRAY is a UV-Resistant acrylic clear coat. It provides a permanent, protec-
tive coating which protects, art, crafts, and valuable against harmful light rays. It is moisture
resistant and smudge proof. It is suitable for photography, artwork, painted surfaces, wood,
metal, paper mache, plastic/ceramic, dried silk, flowers, paper, wicker etc. It will improve artwork
and protects photos made off with pencil, water paints, oil paints, pastel, chalk, charcoal, crayon
and ink.
• Long lasting protection to pencil, pastel, chalk, charcoal, crayon
• Non fading, none yellowing, weather resistant
• Premium quality, high durable.
• Excellent finish
• Aerosol formulation gives quick, even spray
• CFC Free
• UV Resistant
• Acid-free/archival safe
ASMACO FIXATIVE SPRAY- UV CLEAR COAT
Available size:100ml & 400 ml
Packaging: 12pcs / ctn & 06pcs / ctn
SPARKLING
PROTECTIVE
ASMACO TUB & TILE CERAMIC SPRAY is a one-step acrylic spray paint designed to provide
excellent adhesion, durability and colour retention in high moisture areas. This smooth, glossy,
waterproof finish is suitable for use on tiles, sinks and tubs. Ideal for restoration and coating of
bath tubs, washbasins, kitchen sinks. Also usable on wood, metals, plastic, automotive
applications etc. Quick drying & smooth finish formula is ideal for Interior and exterior application.
Non-fading, non-yellowing, weather resistant and heat resistance up to 100°C & CFC Free.
ASMACO TUB & TILE CERAMIC SPRAY
Packaging : 400ml X 12pcs / ctn
Colour: White
CERAMIC RESTORATION
17. ZINC RICH COLD GALVANIZING SPRAY-Quick dry spray with special zinc dust, containing 99%
pure zinc. Galvanic protection against thermal and chemical corrosion Resists salty and other
corrosive atmospheres. Gives semi glossy finish and resistance up to 550°C temperature without
degrading and allowing it to be used on materials subject to be welded (except argon welding).
Excellent finish with high coverage without running or excessive thickness. Formulation guaranteed
free from CFC.
400ml X 12pcs / CTN
ZINC RICH
LUBRICANT
ASMACO ADHESIVE SPRAY is a multipurpose aerosol adhesive. It is fast tacking and has a long
tack range when applied to both surfaces. It is translucent adhesive for permanently attaching foils,
carpeting, many lightweight foams, paper, plastics, cardboard, felt and cloth to painted or unpainted
metals, wood, hardboard and other base materials.
• Excellent Spray Control
• High solid gives better coverage
• User-friendly Aerosol Can
• Long bonding range
• Fast easy application
• Comes with a lace spray pattern for improved accuracy
• Allows for a bond time of 20 seconds to 30 minutes
• Bonding thin films, foils and fabrics
• Picture framing and scrapbooking
• Ideal for crafts and hobbies
ASMACO SPRAY PAINT PRIMER is an easy to use one part primer that is best suited to be used as
filler and adhesion promoter between surface and final coat. The product is coatable with air-drying
acrylic, synthetic and nitro-combi lacquers for metals, wood, ceramics, stone, carton and others.
Asmaco Spray paint primer is lead & cfc Free. It helps in corrosion prevention, promotes adhesion
of the top coat on the substrate & Optimizes the gloss of the top coat and gives an excellent finish.
ASMACO ADHESIVE SPRAY
CERAMIC RESTORATION
PRIMER
SPRAY ADHESIVE
COLD GALVANIZING SPRAY
ASMACO PRIMER SPRAY
15
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO BOND is a two part adhesive, cyanoacrylate and an activator spray in aerosol can, that
provides quick bonding. ASMACO Bond is best suited for fixing and repairing wooden parts, bond-
ing MDF, wood, chip board, rubber, most of the plastics, leather, ceramic, metals, etc. It is excellent
to use in the areas where quick curing of the glue is required.
Features: High bond strength, suitable to bond both horizontal and vertical areas, suitable for
porous and uneven substrates. High viscous.
200ml X 24pcs / CTN
300ml X 25pcs / CTN
ASMACO BOND MDF KIT
Packaging : 400ml X 12pcs / ctn
Colour: White / Black / Red / Red Oxide / Grey
Packaging : 500ml X 12pcs / ctn
18. ASMACO LD+50 is a lubricating & penetrating oil suitable for marine, household, garage &
maintenance purpose. It’s water repellent formula protects metal surfaces and loosens rusty fittings.
It penetrates, lubricates & releases jammed joints, door locks, bolts, machines etc. The Hi-Tech
formula dissolves grease, tar, adhesives and salt deposit leaving a protective coating on the surface
which prevents corrosion. ASMACO+LD 50 is a silicone free formula and hence paintable
after cleaning
ASMACO RS 20 - RUST REMOVER / PENETRATING OIL silicone Based, specially formulated
solvents spray. Penetrates and stops squeaks. It lubricates springs, hinges, windows, doors, lock
tapes, wheels, and moving parts. Removes moisture from spark plugs, electrical contacts, switch
gears, starter, motor engines, etc. Protects and cleans by dissolving grease, gums, dirt, adhesives
and hard substances. Leaves protection on the surface thereby preventing corrosion. Loosens rust
and corroded bolts, controls, cables, and many other fasteners. Frees sticky and jammed joints,
door locks steep presses, sewing machines controls and cable. Ideal for household and indus-
trial applications.
Sizes : 235ml (24pcs / ctn) / 400ml (12pcs / ctn)
Sizes : 235ml (24pcs / ctn) / 400ml (12pcs / ctn)
SILICONE FREE PENETRATING OIL
ASMACO WHITE LITHIUM GREASE SPRAY is a premium quality, lithium based multipurpose
aerosol lubricating paste designed to reduce friction between load bearing, moving metal surfaces
and the combination of metal and plastic surfaces heavy-duty lubrication and protection against
rust and corrosion are required. It provides long lasting lubrication for all metal to metal applica-
tions with wide service temperature range (- 15 to +150 °C) and will not splatter, melt, run, wash off
or freeze.
Packaging: 400ml x 12pcs / ctn
16
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
RUST REMOVER
RUST REMOVER
ASMACO LITHIUM GREASE SPRAY
SILICONIZED PENETRATING OIL
ASMACO RS-20 PRO is a fast acting Silicone Free Rust remover & lubricant which penetrates deep
into cavities, threads and seams. It breaks the rust that holds stuck parts together.
It has been specially formulated to offer quick and easy removal of seized and rusted components
like nuts, bolts, threads, locks, chains etc. It Cleans, lubricates, Stops squeaks and leaves a pro-
tective coating against rust invasion. Frees sticky joints. It dissolves grease, tar, adhesive, salt
deposit etc. Asmaco RS 20 Pro is suitable for marine, household, garage, industrial and mainte-
nance applications.
FEATURES
• Silicone Free
• Frees Sticky joints, Stop squeaks & protects against rust invasion, Cleans & Lubricates.
• Paintable
• Removes moisture, Starts wet motors
• CFC Free
Sizes : 235ml (24pcs / ctn) / 400ml (12pcs / ctn)
RUST REMOVER SILICONE FREE PENETRATING OIL
LUBRICANT
19. 17
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO WELDFIX is specially formulated solvent based adhesive used for cementing and
joining pipes and pipe fittings made of Rigid PVC (U-PVC) or CPVC. It is medium viscosity
penetrating adhesive ideal for waterproof bonding and prevents leakage at extreme
pressures. It is safe for drinking water pipes after complete curing. ASMACO WELDFIX
meets the requirements of International Standards such as BS and ASTM.
ASMACO PUR ADHESIVE / PROFILE GLUE is a single part reactive polyurethane based
adhesive which reacts with moisture in the atmosphere to form a strong and durable joint
resistant to water and temperature. The adhesive can be applied directly from the container
and the curing reaction begins as soon as it comes into contact with moisture. ASMACO PUR
ADHESIVE is best suited for all types of wood works, window and door assembly, staircase,
plywood, rigid plastic foam, concrete and ceramic.
ASMACO PARQUET ADHESIVE is a moisture curing, strong polyurethane wood adhesive,
which is designed as a best suitable adhesive for bonding pre-finished, lamparquet,
pin-wheels anhydrite screeds and jointed planks on: cementitious screeds, different old
wooden floors, ceramic, marble etc. The product is suitable to be used on heated floors.
• Single component, easy to use-no mixing, no mess.• No loss since left over quantity can
be reused if stored properly.• Elastomeric Polyurethane adhesive.• Low VOC – meets
Green Building requirements.• Excellent adhesion to different parquet flooring systems and
construction materials.• Suitable for heated floors.• Suitable for low temperature
application.• Excellent wetting characteristics and rib stability.• Least expansion to give
dimensional stability and to maintain the level of flooring.• Very good ridge formation and
excellent application characteristics.• Very good sound dampening.
Packaging Can: 118ml X 24pcs / ctn
237ml X 24pcs / ctn
473ml X 12pcs / ctn
946ml X 12pcs / ctn
Sizes: 500ml / 250ml
Packaging: 12pcs / carton
UPVC & CPVC CEMENTS
ASMACO GOLD SUPER STRONG CONTACT ADHESIVE is a multi-purpose single compo-
nent air drying Polychloroprene rubber based adhesive, suitably formulated for bonding
various types of substrates. It has excellent green strength and bonds rapidly due to its fast
crystallization rate. This is a high solid, high viscosity contact adhesive and hence it is suitable
for bonding porous substrates like foam, carpets, canvas, wood laminates, MDF laminates,
etc... It has excellent adhesion to common substrates and can be used in automotive decora-
tion and repairs, upholstery works, furniture, leather & foot wear industries, fixing of metals &
plastics, general house hold & industrial maintenance
and DIY use. After drying, glue line is resistant to heat,
moisture and also exhibits good low temperature
flexibility.
Sizes: Tube packaging 125 gms X 144pcs / ctn
Packaging Can: 250gm X 24pcs / ctn
600gms X 12pcs / ctn
3Ltr X 4pcs / ctn
15kg can
PIR GLUE CONTACT ADHESIVE
4 Ltr Bucket
ASMACO PARQUET ADHESIVE
CONTACT ADHESIVE
PUR ADHESIVE / PROFILE GLUE JOINING ADHESIVE
NSF Certified.
DUBAI CENTRAL LABORATORY APPROVED
20. 18
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
ASMACO SELF ADHESIVE TAPES
• Widths & Lengths available based on customer requirements.
CREPE PAPER MASKING TAPE
Crepe Paper coated with natural rubber adhesive. Easy tear, UV Resistant Tape. Highly
conformable crepe paper to give clean release after application. Ideal use for masking,
packing, marking, bundling, splicing and general applications.
GENERAL PURPOSE
• Widths & Lengths available based on customer requirements.
AUTOMOTIVE GRADE
HIGH TEMP 80°C
Crepe Paper coated with natural rubber adhesive. UV Resistant Tape. High Temperature
resistance over long periods for critical Masking applications. Highly conformable crepe paper
to give clean release after application. Ideal use for baking / stove masking applications and
also auto painting, outdoor painting, masking, packing, marking, bundling, splicing and general
applications.
• Widths & Lengths available based on customer requirements.
Colour: Blue / Green / Orange / Yellow / Brown
COLOR MASKING TAPE
HIGH TEMP 80°C
Crepe Paper coated with natural rubber adhesive. UV Resistant Tape. High Temperature
resistance over long periods for critical Masking applications. Highly conformable crepe paper
to give clean release after application. Ideal use for baking / stove masking applications and
also auto painting, outdoor painting, masking, packing, marking, bundling, splicing and general
applications.
21. MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
19
ALU PET TAPE
Aluminium foil/scrim/kraft backing with a specially formulated rubber based adhesive interleafed
with a release liner designed to meet high strength, tear resistant sealing tape applications. This
FSK tape is mainly used to seal and patch FSK duct boards & blankets. It’s excellent adhesive
system will perform in temperatures ranging from -30°C to 121°C.
• Widths & Lengths available based on customer requirements.
FSK ALUMINIUM FOIL TAPE FIBER SCRIM KRAFT
10 X 10 Mesh Glass Cloth backing with high performance flame retardant solvent free acrylic
adhesive protected by an easy-release silicone release paper. Mainly used for joining & sealing Alum
glass laminated fiberglass blankets, duct boards joints & seams, joining & sealing industrial pipes
insulations seams & connections. Alu Glass Tape is a High Temperature resistant & Flame Retardant
Tape. It provides excellent reflection of both heat and light. The Low moisture vapor transmission
rate makes ASMACO Tape an excellent vapor barrier.
ALU PET TAPE : A laminated PET-Foil backing (Polyester: 12 Microns / Foil: 7 Microns), combined
with a high-performance solvent acrylic adhesive, protected by an easy-release silicone release
paper.
FEATURES
• PET-Foil backing provides excellent reflection of both heat and light.
• High quality adhesive with strong adhesion and holding power offers permanent sealing and
bonding.
• Good ageing resistance both indoors and outdoors.
• Low moisture vapor transmission rate offers excellent sealing and patching performance.
• A PET re-enforced aluminium foil combined with special transparent acrylic adhesive makes this
as the ideal product for high temperature applications.
• It is very good for lamination in air conditioning ducting systems, roofing application like flashing,
joints and insulations.
• Widths & Lengths available based on customer requirements.
ALU GLASS TAPE
• Widths & Lengths available based on customer requirements.
A 25 micron (1.0 mil) high tensile strength aluminum foil backing, combined with a high performance
synthetic rubber-resin adhesive. Protected by an easy-release silicone release paper is used to
seal and protect many critical assemblies & surfaces in a wide range of industries from window
glazing manufacture to sealing plates in the flexo graphic printing process, vapor sealing for fiber
glass duct board, sheet metal ducts and FSK systems. Feature include : Moisture and chemical
resistance, heat & light reflective, helps to protect plastic components, flame resistance, outdoor
performance, resists UV and provides long lasting performance.
• Widths & Lengths available based on customer requirements.
ALUMINIUM FOIL TAPE
PLAIN
GLASS REINFORCED
22. 20
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
PVC pressure sensitive, flame proof electrical Insulation tape is a PVC electrical insulation tape with a
higly conformable backing used for insulating, splicing, and connecting, bare wires, for repair work
and general industrial maintenance. Provides high dielectric strength and insulation resistance. Compli-
ant to UL standards. Applications include: electrical insulation and splicing, connecting bare wires,
electrical repair work and general industrial maintenance.
PE-cloth Tape coated with a pressure sensitive rubber adhesive coating combined to provide a quality
product having excellent adhesion and strength. Ideal for sealing, thermal insulation and metal duct
seams. It is a good choice for bundling, heavy carton packing, general maintenance, pipe wrapping,
carpet fixing, air-conditioning ducts seam and joint sealing etc.
Biaxially oriented polypropylene film coated with pressure sensitive water based acrylic
adhesive. Printable and has excellent weather resistance. It is a good choice for bundling &
strapping, heavy carton packing and standard packing applications.
Colours: White / Black
Packaging:
2” X 60ft (60pcs / ctn)
2” X 80ft (60pcs / ctn)
3” X 60ft (48pcs / ctn)
FIBER GLASS TAPE
ELECTRICAL INSULATION TAPE
DRYWALL JOINING TAPE
FIRE RETRADANT
PACKAGING TAPE
BOPP PACKING TAPES
PVC PIPE WRAPPING TAPE UNDERGROUND PROTECTION
Features a stabilized, plasticized PVC film coated with non-corrosive, pressure-sensitive adhesive. It
is moisture resistant anti-corrosive, and higly conformable. It has strong adhesions to metals and
plastics. It is best suited for under ground construction applications.
Packaging: 19mm x 10 yards - 500pcs / ctn
Colours: Black / Red / Green / Yellow / Blue / Yellowgreen
DUCT TAPE INSULATION
• Widths & Lengths available based on customer requirements.
Colour: Tan / Clear
• Widths & Lengths available based on customer requirements
Drywall joining tape is a Self-Sticking 100% fiberglass tape for fast and easy drywall joints.
It eliminates pre-plastering and provides strong reinforcement. Mesh will not trap air that
causes blisters and bubbles.
• Widths & Lengths available based on customer requirements.
23. Packing: 12pcs x 24 card / ctn
Available in Black / Red / Blue / Clear & Grey colours.
Packaging: 12pcs X 12 Doz / ctn
Packaging: 12pcs X 12 Doz / ctn
Size: 2 X 28.5 gms tube
Packaging: 12pcs X 18 Doz / ctn
21
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
DUCT TAPE
SUPER GLUE is one part Cyanoacrylate adhesive suitable for general purpose applications and repair
works of metal parts. This is a quick curing adhesive, strength development as fast as 5-30 seconds. It
works faster and holds stronger on more surfaces than ordinary instant adhesives. The liquid formula
works well on a variety of porous, non-porous surfaces and close fitting repairs. It dries clear and sets
without clamping. ASMACO Super Glue Liquid is resistant to moisture, most chemicals and freezing
temperatures
SUPER GLUE INSTANT ADHESIVE
RTV SEALANT SILICONE GASKET MAKER
DUCT TAPE
ASMACO CRYSTAL CLEAR is a 2K quick setting epoxy adhesive automatically dispenses two equal
parts with one push. This adhesive is suitable for bonding glass, metal, ceramics, wood, tiles, fiber glass
and some plastics. No mess, no spilling and no dried out tube. Allows 4-5 minutes positioning time for
parts.
CLEAR EPOXY ADHESIVE
EPOXY STEEL is a two part ambient curing Epoxy adhesive suitable for general applications and repair
works of metal parts. Best alternative to welding. A quick curing adhesive with a short pot life of 4
minutes. Asmaco Epoxy Steel develops it’s 70% of strength in one hour. The cured product can be
machined using common machining operations. It is resistant to gasoline, antifreeze and almost all
solvents.
EPOXY STEEL EPOXY ADHESIVE
SILICONE GASKET MAKER is one component, ready to use sealant designed for form-in-place gasketing
where high temperature occur. ASMACO RTV Silicone Gasket Maker cures upon contact with atmospheric
moisture at room temperature to form an elastomeric, resilient silicone rubber gasket. The rubber-like seal
formed after curing is highly resistant to weathering and UV exposure, is unaffected to high and low tempera-
ture, and has excellent adhesion characteristics. ASMACO RTV Silicone
Gasket Maker is often used for engine, gear box, motor flange, casing,
water pump, oil pump, radiator, differential gear and other engine parts,
boilers, water heaters as well as on wood, ceramics, glass, etc.
24. 22
MFG.
OF
SILICONE
,
ACRYLIC
&
POLYURETHANE
SEALANTS,
WATER
PROOF
COATINGS,
SELF-ADHESIVE
TAPES
AND
SPRAY
PAINTS
220 g X 24pcs / ctn
220 g X 28pcs / ctn
Available size: 250 ml
Packaging: 72pcs / ctn
BUTANE GAS CAMPING GAS
ASMACO LIGHTER REFILL BUTANE GAS
TETRON-R134A REFRIGERANT GAS
This cartridge is certified by
MIRTEC SA / EBETAM A.E.
Packaging: 1 kg X 15 pcs / ctn
340 g X 30 pcs / ctn
13.6 kg cylinder
ASMACO PORTABLE GAS can is cooking gas designed to use in portable gas stoves
specially designed to be portable and lightweight, used in camping, picnicking, backpack-
ing, or other use in remote locations where an easily transportable means of cooking or
heating is needed. ASMACO Butane gas is ideal for portable stoves in diverse situations,
such as for outdoor food service, catering and in-field hospitals.
Tetron-R134A is a 99.9% pure inert gas used primarily as a "high-temperature" refrigerant
for domestic refrigeration and automobile air conditioners. It also used as a propellant for
aerosol and a blowing agent for extruded polystyrene foams.
Tetron-R134a, is a haloalkane refrigerant with thermodynamic properties similar to R-12 but
with less ozone depletion potential and has an excellent safety performance. It is a colour-
less gas under ordinary temperature and a colourless and transparent liquid under
pressure.
0437
ASMACO LIGHTER REFILL BUTANE gas having high quality and ultra-refined butane gas
in aerosol CAN. Due to its lower pressure, it’s very easy to refill any lighter with provided
Multi Nozzle. It is suitable for cigarette lighter, blow torch, professional butane torch lighter
and so many other lighter.
25. SILICONE & ACRYLIC SEALANTS FIRE STOP SEALANTS
SPRAY PAINTS
ADHESIVE TAPES
CONTACT ADHESIVE
POLYSULPHIDE SEALANTS
WATER PROOFING COATINGS
GASKET MAKER
MDF KIT
FUEL GAS
PENETRATING OIL
SUPER GLUE PVC CEMENT
WATER STOP SEALANT
POLUYURETHANE SEALANTS
POLYURETHANE FOAM REFRIGERENT GAS
EPOXY STEEL
HAND SANITIZER SPRAY
SURFACE SANITIZER
POCKET SANITIZER
DISINFECTANT SANITIZER SPRAY SANITIZER SPRAY
AIR FRESHENER
LUBRICANT
AUTOMATIC DISPENSER
AIR FRESHENER
AUTOMATIC DISPENSER
SANITIZER SPRAY
INSECTICIDE
26. P.O. Box: 21152, Sharjah, U.A.E.
E-mail: info@anchorallied.com, Website: www.anchorallied.com
MANUFACTURERS OF SILICONE,ACRYLIC & POLYURETHANE SEALANTS,WATERPROOFING COATINGS,AEROSOL PRODUCTS ADHESIVE TAPES AND HOMECARE PRODUCTS
PRINT
VERSION:
E-1/2020
VERSION
DATE:
06/2020