RSF-AT-100 is a diluent that can be used with cationic and silicone softeners to reduce costs and improve performance. It is a non-ionic polymeric base that can be used on its own as a softener or blended with silicones and cationics. When used as a diluent, it improves softness and reduces yellowing. Using it can provide a cost savings of 10-20% compared to traditional recipes. It is suitable for exhaust and padding applications on fabrics like cotton and polyester.
Building on a FAIRly Strong Foundation to Connect Academic Research to Transl...
Ran Chemicals - Textile - Finishing - Non ionic fabric softener rsf-at-100- rsa industries, india
1. DILUENT FOR CATIONIC & SILICONE SOFTENER Suitable for all fabrics for exhaust & padding application
RSF-AT-100
RSA Industries Pvt. Ltd. ______________________________________________ For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in/ www.rsaindustries.in
2. RSA Industries Pvt. Ltd.
For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in / www.rsaindustries.in
RSF-AT-100
_____________________________________________________________________________________
RSF-AT-100 represents a unique concept in finishing softeners. It is a revolutionary product that can be used as an additive/diluent along with cationic and silicone softener to reduce cost andimprove performance. The product RSF-AT-100is a hydrophilic non-ionic polymeric base. It can be used on its own as a non-ionic softener orcan be blended with silicones and cationicto achievesuperior performanceat lowercost. The product is suitable for exhaust and padding applications for all types of fabrics like Woven Cotton, Cotton Knits, Terry Towel and Polyester.
Chemistry for Performance
When used as a diluent alongwith cationics or silicones it improves surface smoothness,softness and bulk Reduces yellowing,improveshydrophilicity and provides better brilliancy and brightness No tonal variation. No adverse effect on fastness The non-ionic base is stable and compatible with all finishing systems Can be used for exhaust & padding applications Reduces drying time
Chemistry for Economics
When used as a diluent for blended products, it reduces the consumption of cationic or silicone softener, thus giving minimum saving of 10% (depending upon amount of cationic or silicone used) with better performance The price of RSF-AT-100considered for calculations below is USD 5.0
Physical Properties
Product
Appearance
pH
Pack Size
Non-ionic fatty acid esters and emulsifiers Biodegradable, Eco-friendly
Yellowish paste
6 – 6.5
50 kg narrow mouth HDPE carboy
3. RSA Industries Pvt. Ltd.
For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in / www.rsaindustries.in
Usage guidelines To use as an additive/ diluent for Cationic flakes: The product should be preferably used as a two-component system during dosing, i.e. RSF-AT- 100 and cationic flakes should be addedindividually at the time of final application. The dosage of stock solution for bothRSF-AT-100 and cationic flakes can be adjusted as per requirement.
RSF-AT-100 with Cationic Flakes - Recipe & Saving Ingredients Existing Recipes Suggested Recipe I Suggested Recipe II
10% stock solution of Cationic flakes
10 kg
2.5 kg
3.0 kg 10% stock solution of RSF-AT-100 0 kg 2.5 kg 2.0 kg
Solid Content
1 kg
0.5 kg
0.5 kg Cost per kg
Cationic Flakes
2.00 USD
2.00 USD
2.00 USD RSF-AT-100 5.00 USD 5.00 USD
Cost in recipe
Cationic Flakes 2.00 USD 0.50 USD 0.6 USD
RSF-AT-100
1.25 USD
1.00 USD Total 2.00 USD 1.75 USD 1.6 USD
Cost saving
12.50%
20.00%
Note:Single component system can be made when required, i.e. RSF-AT-100 and cationic flakes can be pre-mixed and then added to the system(Although, stability of the same may vary depending upon the ratio and type of cationic flakes used).
250 gms RSF-AT- 100
can be replaced by
750 gms Cationics flakes
Equivalent to 1 Kg undiluted cationic softener
Water 500 gms
Cationic flakes 250 gms
RSF-AT- 100 250 gms
4. RSA Industries Pvt. Ltd.
For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in / www.rsaindustries.in
To use as a diluent for Silicone: The product should be preferably used as a two-component system during dosing, i.e. RSF-AT- 100 and silicone should be added individually at the time of final application. The dosage of stock solution for both RSF-AT-100 and silicone can be adjusted as per requirement.
RSF-AT-100 with Silicone- Recipe & Saving Ingredients Existing Recipes Suggested Recipe I Suggested Recipe II
Silicone(30%)
1 kg
0.4 kg
0.5 kg 20% stock solution of RSF-AT-100* 0 kg 1.25 kg 1.0 kg
Cost per kg
Silicone (30%) 2.50 USD 2.50 USD 2.50 USD
RSF-AT-100
5.00 USD
5.00 USD Cost in recipe
Silicone (30%)
2.50 USD
1.00 USD
1.25 USD RSF-AT-100 1.25 USD 1.00 USD
Total
2.50 USD
2.25 USD
2.25 USD Cost saving 10.00% 10.00%
* Before adding in the bath, RSF-AT-100 should be diluted in warm water at 60°C in 1:4 or higher ratio. If you add RSF-AT-100 directly in the bath it may form lumps.
Note: Single component system can be made when required, i.e. RSF-AT-100 (diluted 1:4) and silicone can be pre-mixed and then added to the system (Although, stability of the same may vary depending upon the ratio and type of silicone used)
200 gms RSF-AT- 100
Can be replaced by
500 gms Silicone (30%)
Equivalent to 1 Kg undiluted silicone softener
Water 1000 gms
Silcone (30%) 400 gms
RSF-AT- 100 250 gms
5. RSA Industries Pvt. Ltd.
For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in / www.rsaindustries.in
Special features on application of RSF-AT-100 To make hydrophilic softener for terry towel, use hydrophilic silicone The ratio of silicone to RSF-AT-100 can be changed as per your application requirement To make shear stable softener for exhaust, use shear stable silicone The silicone content can vary from 50-70% of the composition. AdjustRSF-AT- 100quantity as required Non-shear stable hydrophobic silicone softener can be used to make softener for padding application that does not require shear stability RSF-AT-100can be used on its own as a non-ionic softener For better hydrophilicity and lesser yellowing, use more RSF-AT-100in blend In a multi-component finishing system, replace cationic and silicone with RSF-AT-100 as per the above illustrations
The detailed blending procedure to make single component along with cost calculations is available on request.
Disclaimer: The literature indicates general information guidelines on our product for their use. The user should check the suitability of the product for their use. RAN/RSA makes no warranty of any kind expressed or implied.
6. RSA Industries Pvt. Ltd.
For inquiries please contact- +91-9823072312
Email: exports@ranchemicals.in, sales@ranchemicals.in
Website: www.ranchemicals.in / www.rsaindustries.in
Industrial safety practice is to be followed. RAN/RSA takes no responsibility and expressly disclaim liabilities for law, damage or expense rising out of or in any way connected with the handling, storage, use or disposable of the product.