Yaser Pervaiz Bhatti is seeking an aerospace engineering position utilizing over 6 years of experience in aircraft maintenance at Pakistan International Airlines. He has extensive experience performing tasks such as landing gear and engine removal/installation on various Boeing and Airbus aircraft. Bhatti holds an Aircraft Maintenance Apprenticeship certification and License With Out Type Rating in Categories A and C. He has also received additional training from PIA and has multiple appreciation letters for jobs performed.

1. YASER PERVAIZ BHATTI
House#19, Gulshan-e-Jami, Model colony, Karachi, Pakistan.
+923218291990 yaser_jee@hotmail.com
Yaser.pia
Aircraft Technician (Aerospace)
Above 6 years’ experience in Base Heavy maintenance
Objective
To get a job in a competitive & challenging environment in the field of Aerospace Engineering to properly
utilize acquired professional skills and talent and apply sound Aviation as well as hands on practical
knowledge to produce a quality work. At the same time develop personal abilities further, enhance
qualification and attain significance in the area of work
Work Experience
From December, 2008 to Present
Pakistan International Airline, P.I.A
As an Aircraft Senior Technician
Work experience includes, routine and non-routine maintenance, defect rectification and troubleshooting,
modification as per publishers instructions and data, replacement of major and minor modules and
components, CDCCL related tasks, servicing and major checks on Boeing 777-200 ER, Boeing 777-200
LR, Boeing 777-300 ER, Boeing 747-200/300, Airbus 310 ATR 42-500 and Foreign aircraft while
keeping in view manufacturers data, local authorities and company policies
Carried out Heavy maintenance Checks
 Check A, A6, A12
 Check C, C2, C3, C4/D, C5
 Check D
 S.S.I.D
Always upholding safety, and optimizing the working environment by minimising the hazards at the work
place.
Key Tasks Performed on Boeing 777
 Removal and installation of Landing Gears
 Removal and installation of Flaps
 Removal and installation of Elevator
 Free Play Check of Horizontal stabilizer, Rudder Tab, Rudder, Elevator , Flaps
 Removal and installation of Slats
 Removal and installation of Retract actuator of main Landing Gear
 Maintain Dent and Repair Chart
 Removal and installation of OFF-Wing Slide and its Reservoir
 Removal and installation Centre axle of main Landing Gear
Page 1

2.  Removal and installation of Rudder PCU
 Removal and installation of Flaperon PCU
Modification(s)
 Modification on Fuel Tanks Cap Sealants as per Service bulletin on Boeing 777-200/300-ER/LR.
 Modification of Failsafe link bolt change as per service bulletin on Boeing 747-200/300
License(s)
 License With Out Type Rating (LWTR) in Cat. ‘A’ and Cat. ‘C’
License No. 2354, ICAO Type-II equivalent.
Qualification(s)
Technical Training(s)
 Aircraft Maintenance Apprenticeship (Aerospace)
18th
July, 2005 to 17th
July, 2008 (3 years programme)
Pakistan International Airlines Training Centre.
 Basic Airframe
October, 2009 to December 2009
Pakistan International Airlines Training Centre.
 Basic Gas Turbine
May, 2012 to June, 2011
Pakistan International Airlines Training Centre.
 ATR 42-500 Type Course
April, 2013 to May, 2013
Pakistan International Airlines Training Centre.
Additional Trainings
 Attended Aviation legislation course from Pakistan International Airlines
 Attended Organizational procedure course from Pakistan International Airline
 Attended Standard Maintenance Practices course from P.I.A
 Attended Human Factor course from Pakistan International Airlines
 Attended CDCCL course from Pakistan International Airlines
 Attended Fire safety course from Pakistan International Airlines
Academic Qualification
 H.S.S.C
Date: 2001 to 2003
IQRA Intermediate Institute, Karachi, Pakistan
Page 2

3. Appreciation Letter(s)
 Appreciation letter on Removal and Installation of Landing Gear of Boeing 777
 Appreciation letter on First time Check C4/D of Boeing 777 series in PIA.
 Appreciation letter on Modification in Fuel Tanks Cap Sealants as well as Check C of Boeing 777
series.
 Appreciation letter on Main landing gear actuator change in short time of Boeing 777-300 ER
 2 Appreciation letters on Landing Gear Removal and Installation of Airbus 747-300 in shortest
possible time.
 Appreciation letter on (CONVERSION OF COMBI TO PASSENGER) as well as check ‘C’ of Boeing 747-
200 AP-BAK.
 2 Appreciation letters on Modification of Failsafe link of PIA and Foreign Aircraft (Hellenic imperial).
 Appreciation letter on Landing Gear Removal and Installation of Airbus 310-300 in short time
period.
 Appreciation letter on recovery of Saudi Aircraft MD83 after emergency landing.
Additional Information
Personal Information
 Nationality Pakistani
 Gender Male
 Date of Birth 28th
February, 1986
 Passport No. EZ3996621
Language(s)
 Fluent English, Urdu
 Native Punjabi
Technical Competencies and Computer Skills
Fully aware to use of Following Technical Documents
 AMM
 AIPC
 Service bulletins
 Technical Notices
Page 3

4.  Airworthiness Directives
 Task Cards
 ARO
Microsoft Office
Reference(s)
Page 4