2. Product Description
On demand hot water – no delay
Cut energy waste – Flow switch activates heater only when water is running, no
standby heat loss
99% Efficient, .99 energy factor
Endless hot water – No storage capacity to deplete
Reduces installation cost and material – No T&P valve required (check local
codes)
Glass reinforced heating chambers in a unique flow path ensures optimum heat
transfer and extended element life
Easy Installation – Simple NPT fittings that require no soldering. Unit mounts
directly to the wall with common hardware.
Prevents Legionella bacteria growth
Reduces calcification and sedimentation
Field Serviceable – All major component are field replaceable and readily
available
Proudly made In the USA
Shopping mall and Retail outlets
Schools and all other public buildings
Office and tenant spaces
Commercial builds such as Restaurants and Service Stations
Modular buildings, office and trailers
Concession stands and food service locations
Any remote sink that does not have hot water
Sizing – Size based on performance and not electrical infrastructure. Three key
factors, incoming water temperature, water volume, and desired outlet
temperature.
Electrical – All Eemax Tankless Water Heaters are designed to be hardwire to a
dedicated circuit breaker and are not supplied with a cord and plug
Plumbing – Pre-heated or Cold water feed . This family of Eemax products has
thermostatic control and is capable of reacting to changing temperatures while
providing stable output.
Local Codes – Please check all applicable codes, national and local to ensure
compliance both on the plumbing and electrical installation
3. Rheem Heating Element
Product Description
For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
Watt Density Classification: HWD, Input Voltage (V): 240, Wattage at 240V (W): 5500, Watt
Density at 240V (W/sq. in. ): 202
Outer Sheath Material: Copper (with Plating), Resistored: No, Configuration: Fold back,
Element Diameter (in.): .260
Element Length – Flange to Tip (in.): 9.60, Actual Thread Size – Outside Diameter (in.): 1-9/32,
Nominal Thread Size – (in.): 1
Threads per Inch: 11-1/2, Thread Type Series Designation: NPSM, Hex Head Size – Across
Flats (in.): 1-1/2
More Information Visit here: YourWaterHeater