In this document, we have covered the Shell Mold Casting Process steps and features. The shell-mold casting process is also known as the shell molding process, is an expendable mold casting process that uses resin-covered sand to form the mold.

1. 1/2
ME Mechanical Team December 20, 2021
Shell-mold Casting Process
mechanicalengineering.blog/shell-mold-casting-process/
The shell-mold casting process is also known as the shell molding process, is an
expendable mold casting process that uses resin-covered sand to form the mold.
In the shell-mold casting process, the mold is made like a shell i.e., the thin or
hollow mold is used so that the weight of mold is less and handling of mold
becomes easier.
To manufacture the thin mold, the phenolic resin with a small addition of silica sand
is used as the mold material.
Making shell-mold casting requires the use of a metal pattern, oven, sand-resin
mixture, dump box and molten metal.
Shell-mold casting allows the use of both ferrous and non-ferrous metals, most
commonly used molten metals are cast iron, carbon steel, alloy steel, stainless
steel, aluminum alloys and copper alloys.
The shell-mold casting process consists of the following steps:
1. Pattern creation – A two-piece metal pattern is created in the shape of the desired
pattern required.
2. Mold creation – First, each pattern half is heated to 175-370°C and coated with a
lubricant to facilitate easy separation from the pattern formed. Next, the heated
pattern is clamped to a dump box. The dump box is inverted, allowing this sand-
resin mixture to coat the pattern. The heated pattern partially cures the mixture,
which now forms a shell around the pattern. Each pattern half and the surrounding
shell is cured to completion in an oven and then the shell is ejected from the
pattern.
3. Mold assembly – The two shell halves are joined together and securely clamped to
form the complete shell mold. If any cores are required, they are inserted prior to
closing the mold. The shell mold is then placed into a flask and supported by a
backing material.
4. Pouring – The mold is securely clamped together while the molten metal is poured
from a ladle into the gating system and fills the mold cavity.
5. Cooling – After the mold has been filled, the molten metal is allowed to cool and
solidify into the shape of the desired casting.
6. Casting removal – After the molten metal is cooled, the mold is broken and the
casting is removed. Trimming and cleaning processes are performed to remove any
excess metal from the feed system and to separate small sand particles from the
mold.

2. 2/2
Image credits: CustomPartNet
Ceramic molding
In the shell mold casting process in place of phenolic resin if the ceramic slurry is used as
a mold material then it is called ceramic molding.
Features of Shell Molding Process:
In the shell molding process thickness and weight of mold is less.
The production rate of shell mold is very high.
Because of the low porosity of mold, through riser must be used.
It is useful for only circular and symmetrical jobs.
The size of casting can be formed is limited to 30kg only.
Highly complicated shapes cannot be formed using the shell mold casting method.
This process produces more dimensional accurate casting compared to other sand
casting processes.
Lower draft angles can be used.
The shell-mold casting method is used for making cylinders and cylinder heads for
IC engines, automobile transmission parts, cast tooth bevel gears, gear blanks,
refrigerator valve plates, small crankshafts, track rollers for crawlers tractors,
transmission planet carriers etc.