RH50 Cembre Hydraulic Crimp Head (240sqmm) - RH50 Presshead Cembre hydraulic crimp head RH50 complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar max. Cembre crimp head RH50 is ideal for high volume and bench crimping due to ligheweight (1.6kg) and compression speed. Cembre RH50 Crimping Presshead - Length 196mm, Width 75mm, 50kN Crimp Force. Cembre RH50 Presshead - Crimping Head Capability : LV Lugs & Splices up to 240sqmm Insulated Terminals up to 70sqmm End Sleeves up to 50sqmm C Sleeves, C Tap Connectors up to 70sqmm

1. HYDRAULIC CRIMPING TOOL
general features
Dimensions
mm
Crimping
force
kN
length
width
50
380
130
HT 51
Weight
kg
2,7
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
“C” sleeve
Connectors
50
New design two
speed hydraulic tool,
lightweight and compact, this tool is ideal
for working in confined
spaces. Having the benefit of spring loaded handles,
the dies can be advanced
using only one hand; therefore
leaving the other hand free to
position the connector.
For ease of operation and comfort
of the operator, the tool head can be
fully rotated through 180 degrees.
The built-in safety valve will by-pass the
oil supply when the maximum pressure
is reached, and a pressure release
system can easily be operated at any
stage of the compression.
70
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
445x290xh95
1,2
D
—
* Suitable for storage of the tool and 20 sets of dies.
HT 51-KV version also
available for Power
Supply Companies
HYDRAULIC PRESSHEAD
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
50
700
196
75
RH 50
Weight
kg
1,6
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
“C” sleeve
Connectors
50
Hydraulic
presshead
complete with quick
automatic coupler for
connection to a hydraulic
pump with a working pressure
of 700 bar max, (see page 138140) RH 50 is suitable for installing the same range of connectors
as HT 51.
70
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
Canvas bag 007
445x290xh95
350x105
1,2
0,13
D
—
—
D
* Suitable for storage of the tool and 20 sets of dies.
HYDRAULIC PRESSHEAD
general features
Dimensions
mm
Crimping
force
kN
Max operating
pressure
bar
length
width
50
700
210
70
RHM 50
Weight
kg
1,6
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
Insulated
terminals
End
sleeves
240
70
50
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
Canvas bag 007
445x290xh95
350x105
1,2
0,13
D
—
—
D
Particularly suitable
for high volume
bench crimping.
* Suitable for storage of the tool and 20 sets of dies.
These tools are supplied without dies. For die selection, please refer to chart on pages 144 to 150
Hydraulic presshead complete
with quick automatic
coupler for connection to
hydraulic pump with working pressure of 700 bar max,
(see page 138-140).
RHM50 is suitable for installing the
same range of connectors as RH50.
99