2. MATERIAL LIST
• 2x2 pieces of wood
• 2x4 pieces of wood
• 2 pieces of MDF
• Card
• String
Equipment list
• Hand drill
• Long screws
• Hinges
3. STEP BY STEP GUIDE
1. Gather all equipment
2. Mark on the wood the measurements
3. Cut the wood
4. Put the wood together with screws in two sections
(make both sides first then connect beams
between them) (make sure to make a pilot hole
before drilling in the screw)
5. If not already cut, cut the MDF to size and attach
to front and sides and top of counter
6. Cut out holes in both sides for manoeuvrability
7. Paint to spec