The document discusses modifying a last to replicate the shape, toe, ball, and heel of an original mukluk boot while reflecting key technical factors. Test reports provide direction to finalize a last that matches the original look and fit in order to expand into fashion markets.
Workshop - Best of Both Worlds_ Combine KG and Vector search for enhanced R...
Trials and tests for last modification for new mukluk boot.
1. 1.Searching for a proper last which contains the same inside volume of original mukluks
boot vibram and reflects characters of toe shape, ball , and heel .
2.Based on the both important elements in technical key factors, modifications on last,
pattern and fit are improved and closed to same look of original mukluk accordingly.
3.The fit test report are purely for technical demands and inputs. These are not yet ready
for final assessment of product values or critics. These are for the direction of
modification to finalize a GOOD last in look and fit to build our MUKLUK to fit in more
fashion trends markets.
2. First of all, picking up a good last is
most important basis to start all
technically engineering
modifications related especially in
a mature product in market for a
long while.
3. The fit testing data of original boot
will be reflected to further last
corrections to get a better fit and
cosmetic look for our aboriginal
product line.
4. Normally medial /inside of human
feet is longer than lateral/outside.
If not , two results will occur. The
toe will be twisted towards inside
so reversed on upper and waist of
outside has too much space,empty.
5.
6.
7.
8.
9.
10.
11. I think new last modifications
collected fit data from original and
new samples will present a best fit
and look based on aboriginal crafts
and lasted characters. New sample will be finished
and sent to office on Wednesday.
Editor's Notes
Based on above discrepancies, the new pattern engineered from a chosen last get some improvements of toe and instep but still needs works on last to get a best result on it.