2. Scene 1
This picture will be shown at the beginning of each video as an introduction to the
content. Along with this I will have title of the video, under the picture. I will not
waste time with a long intro, as this sends the message to the viewer quickly.
3. Scene 2
• I Change the shape of the house from the last video, from a
rectangle to ‘L’ shape
• I then demonstrate how to add a roof to this type of shape. – ‘Line’
and ‘Move’ tool
4. Scene 3
• I demonstrate how to offset the edges of the house – ‘Offset’ tool
• I then push the offset sides upwards, to form a roof overhang –
‘Push/Pull’ tool
5. Scene 4 & 5
• I edit the roof overhang on the front side of the house so that it is
parallel to the top edge of the roof. – ‘Line’ tool
• I then use the ‘Push/Pull’ tool to take this piece off
6. Scene 6
• I demonstrate the use of the ‘Follow Me’ tool, in moving a piece
around the house, by dragging your cursor in a certain direction.
7. Scene 7
• I demonstrate how to draw a more detailed window using the
‘Offset’ tool to create layers.
• I then use the ‘Push/Pull’ tool, to pull the layers outwards.
8. Scene 8
• I draw a chimney using the same instructions from the last video
tutorial.
• This time I use the ‘Offset’ tool again to offset the sides of the
chimney. I then use the ‘arc’ tool to arc the edges and then use the
‘Follow Me’ tool, to pull this arc around the chimney.
