Introduction to proteus for dummies. It is a software used to simulate electrical circuits. It saves time and also appliances. It is widely used now a days in electrical technology.

1. INTRODUCTION TO
PROTEUS
Presented by:
 Ahmad Hassan 2016-Civ-321

2. What is Proteus?
 Proteus is a software for microprocessor
simulation, schematic capture and printed circuit
board (PCB) design.
 ISIS Stands for Intelligent Schematic Input System
and is used for drawing circuit diagrams etc.

3. Firstly, Click on option “P” to select a
component.

4. Drag a component and place it to
desired place.

5.  Now connect all these elements by
clicking on there respective terminals
which is required to connect.

6. Go to terminal mode. Pick ground and
connect it with capacitor.

7. Go to generator Mode and pick the sine.
Give it as input.

8. Now adjust the voltage and frequency say 5V
and 1Hz. We can also change the value of
components.

9. Place the current probe b/w input & resistor
and two voltage probes b/w resistor, inductor
& capcitor.

10. Now click on play. It can be observed that the
values are continuously changing as we
provided sine wave.

11. Click on analogue graph and drag the
circled probes.

12. Now press the ‘SPACE’. The graph will
be appeared.

13. Thank You