1. BACHELOR OF QUANTITY SURVEYING (HONS)
1 Prepared by Sr Habizah Sheikh Ilmi
MEASUREMENT 2 (QSB 60204)
PROJECT ASSIGNMENT BRIEF
Your team has been appointed by the client to prepare the Bills of Quantities (BQ) of the following elements for the
assigned project:-
a) External Wall.
b) Internal Wall.
c) External Wall Finishes.
d) Internal Wall Finishes.
e) External Floor Finishes (except staircases).
f) Internal Floor Finishes (except staircases).
g) External Ceiling Finishes.
h) Internal Ceiling Finishes.
Specification:
i. The type of external painting is Nippon Weathershield paint or approved equivalent.
ii. The type of internal painting is Nippon Super Martex emulsion paint or approved equivalent.
iii. Painting to timber surfaces is 3 coats of “Nippon Timbershade” gloss enamel paint.
iv. Wall tiles shall be 200mm x 250mm x 8mm thick “White Horse” or approved equivalent glazed ceramic
tiles.
v. Floor tiles (CT) shall be 200mm x 200mm x 8mm thick “Niro” or approved equivalent ceramic tiles.
vi. Floor tiles (HT) shall be 300mm x 300mm x 9mm thick “Guocera” or approved equivalent homogeneous
tiles.
vii. The timber flooring is 195mm x 2200mm x 14mm thick “ME Merbau” or approved equivalent
engineered timber flooring; laid in accordance to the manufacturer’s instruction.
viii. The height of tile skirting is 100mm high.
ix. No stiffener is allowed.
REQUIREMENT
You are required to submit your work as stated in the following order:
1) Submission cover sheet.
2) Contents of the document.
3) Printed Bills of Quantities.
4) Taking-off list.
5) Query list.
6) Dimension sheets
7) Question paper.
SUBMISSION DATE : 22 JUNE 2017 AT 12.00PM
Any work submitted after the deadline shall have the percentage grade assigned to the work on face value
reduced by 10% for the first day and 5% for each subsequent day late. A weekend counts as 1 day.
Objectives
To broaden and refine the student’s skills relating to the measurement and description of building works.
To understand the purposes, the characteristics and skills of specification writing of the various trades.
To identify the method of measurement for the different types of architectural finishes and the workmanship.
To appreciate different types of finishes and workmanship.
2. BACHELOR OF QUANTITY SURVEYING (HONS)
2 Prepared by Sr Habizah Sheikh Ilmi
To have sufficient knowledge and understanding of the Standard Method of Measurement in taking-off
quantities.
To develop an understanding of the principles of measurement in preparing the Bills of Quantities.
Learning Outcomes
1. Recognize the items measurable for brickwork, floor, wall and ceiling finishes.
2. Explain and able to interpret clauses in the Standard Method of Measurement (SMM) for the various trades in
relation to brickwork, floor, wall and ceiling finishes.
3. Adopt a systematic approach to take-off quantities from drawings for the preparation of Bills of Quantities.
4. Distinguish and illustrade differences in writing-up descriptions in accordance
5. Demonstrate a systematic and orderly mind and be able to visualize the drawings and details given.
6. Generate a conceptual understanding of and the ability to competently carry out the preparation of the Bills of
Quantities for brickwork, floor, wall and ceiling finishes.
Plagiarism (Excerpt from Taylor’s University Student Handbook 2013, page 59)
Plagiarism, which is an attempt to present another person’s work as your own by not acknowledging the source, is
a serious case of misconduct which is deemed unacceptable by the University.
"Work" includes written materials such as books, journals and magazine articles or other papers and also includes
films and computer programs. The two most common types of plagiarism are from published materials and other
students’ works.
1. Published Materials
In general, whenever anything from someone else’s work is used, whether it is an idea, an opinion or the
results of a study or review, a standard system of referencing should be used. Examples of plagiarism may
include a sentence or two, or a table or a diagram from a book or an article used without acknowledgement.
Serious cases of plagiarism can be seen in cases where the entire paper presented by the student is copied
from another book, with an addition of only a sentence or two by the student.
While the former can be treated as a simple failure to cite references, the latter is likely to be viewed as
cheating in an examination.
Though most assignments require the need for reference to other peoples’ works, in order to avoid plagiarism,
students should keep a detailed record of the sources of ideas and findings and ensure that these sources are
clearly quoted in their assignment. Note that plagiarism also refers to materials obtained from the Internet too.
2. Other Students’ Work
Circulating relevant articles and discussing ideas before writing an assignment is a common practice. However,
with the exception of group assignments, students should write their own papers. Plagiarising the work of
other students into assignments includes using identical or very similar sentences, paragraphs or
sections. When two students submit papers that are very similar in tone and content, both are likely to be
penalised.
