According to the working principle of Jaw crusher machine

1. According to the working principle of Jaw crusher machine
Jaw crusher machine
Jaw crusher motor drive belt and pulley, the eccentric shaft to make the moving
jaw moves up and down, when the movable jaw rises elbow plate and the movable
jaw angle becomes larger, thus pushing the movable jaw plate close to fixed jaw
plate, at the same time, the material is crushed, to achieve the purpose of
breaking down; when the movable jaw when the downlink, elbow plate and the
movable jaw angle becomes small, the movable jaw plate, the pull rod under the
action of the spring, leaves the fixed jaw plate, the broken material from the
crushing cavity outlet. With the continuous rotation of the motor and the
crusher jaw periodically to crush and discharge material, to achieve production.
Jaw crusher works, the movable jaw plate reciprocates periodically to the fixed
jaw plate, and made nearly, and leave. When approached, the material is pressed,
splitting, the impact was broken in the two jaw plate; when leaving, had been
broken material by gravity from discharged.
According to the motion characteristics of the movable jaw plate of the jaw
crusher is different, can be divided into two categories:
1, the simple pendulum
The movable jaw hanging on the mandrel, a side to side. When the eccentric shaft
rotates, the connecting rod to do reciprocating motion on the left, broken and
unloading. This crusher adopts double crank connecting rod mechanism, while the
movable jaw broken by a great force, and the eccentric shaft and the connecting
rod is less force, so the industry made more mainframe and midrange, used in
crushing hard materials. In addition, the crusher, jaw trajectory of each point
is a circular arc with center, radius equal to the distance to the axis of the
upper, lower arc, arc, the crushing efficiency is low, the crushing ratio is
generally 3~6. As a simple trajectory, so that a simple swing type jaw crusher.
2, complex swing type
The movable jaw is directly mounted on the eccentric shaft, connecting rod of
the crank and connecting rod mechanism, is directly driven by the eccentricity
of the eccentric shaft, movable hinged jaw thrust plate attached to the
posterior wall of frame. When the eccentric shaft rotates, the movable jaw
trajectory of each point is determined by the circle line suspension point
(radius is equal to the eccentricity), down gradually become more oval, oval to
lower, more partial, until the lower part and the thrust plate connection point
for circular arc trajectory. Because of this machine on the movable jaw
trajectory of each point is more complex, so called complex swing type jaw
crusher.
http://www.klipman.com/
http://www.travelerthai.org/product/crushing/pe-jaw-crusher.html
According to the working principle of Jaw crusher machine
Jaw crusher machine
Jaw crusher motor drive belt and pulley, the eccentric shaft to the moving jaw
moves up and down when the movable jaw plate rises elbow and angle of the moving
jaw becomes large, thereby pushing the movable jaw plate close to the fixed jaw
plate at the same time, the material is crushed, to achieve the purpose of
decomposing; when the movable jaw when the downlink, the elbow plate and the
movable jaw angle becomes small, the movable jaw plate, the traction rod under
the action of the spring, leaving the fixed jaw plate, the fractured material
from the outlet of the crushing cavity. With the continuous rotation of the
motor and the grinding jaw to crush and periodically discharging material for
production.
Jaw <a href="http://www.klipman.com/">crusher machine</a> works, the moving jaw
plate periodically reciprocating to the fixed jaw plate and did so, and leave.
When approached, the material is pressed, fractionation, the impact was broken
in two plate jaw; . Upon leaving, had been broken by gravity discharged material
According to motion characteristics of mobile jaw plate of jaw crusher is
different, can be divided into two categories:
1, the simple pendulum

2. The movable jaw suspended on the mandrel, a side to side. When the eccentric
shaft is rotated, the connecting rod for reciprocating the left broken and
unloading. This mill double crank connecting rod mechanism adopts, while the
movable jaw broken by a large force, and the eccentric shaft and the connecting
rod is less force, so that the industry has more computer central and mid-range
used in the grinding of hard materials. In addition, the crusher trajectory, the
jaw of each point is an arc with the center, a radius equal to the distance from
the axis of the shaft bottom, bow, the crushing efficiency is low, crushing
ratio is usually 3 ~ 6. As a simple path, so that a simple swing type <a
href="http://www.travelerthai.org/product/crushing/pe-jaw-crusher.html">jaw
crusher</a>.
2 complex type oscillating
the movable jaw is mounted directly on the eccentric shaft, connecting rod and
crank-shaped connecting rod mechanism, is entered Born by the eccentricity of
the shaft eccentric articulated movable jaw thrust plate secured to the rear
wall of the frame. When the eccentric shaft is rotated, the movable jaw
trajectory of each point is determined by the suspension point of the circle
line (radius equal to the eccentricity), down to become progressively more oval,
oval to lower, more partial until the bottom and the thrust plate connection
point for circular path of the arc. Because of this machine on the mobile jaw
trajectory of each point is more complex, said complex crusher type swing jaw.