The document discusses wind data analysis and measurement equipment recommendations. It provides an overview of Kintech Engineering and their products, including data loggers and sensors for measuring wind speed, direction, temperature, pressure and more. Examples of data output are shown containing time series measurements from multiple sensors. Key steps in analyzing wind data are outlined, such as checking for physically realistic values and comparing to other long-term weather datasets.
This document provides the minimum "Z-scores" required for admission to various university courses of study in Sri Lanka for the 2012/2013 academic year, based on results from the 2012 G.C.E. Advanced Level examination. Z-scores are provided for each district in Sri Lanka for courses such as medicine, engineering, commerce, and arts. Some districts did not have any qualified candidates that met the minimum requirements for certain courses. The courses listed included both science and arts-based fields across multiple universities in Sri Lanka.
The document appears to contain statistical data organized into a table with over 100 rows and columns. It includes values ranging from around 1.5 to over 250. The data is grouped into categories including degrees of freedom, sample sizes ranging from 1 to over 10,000, and values in increments of 1 from 1 to 30 or more.
This document provides a table showing the present value of a 1 unit annual annuity for "n" periods using interest rates from 1% to 40%. It was created by Angel Higuerey Gómez in November 2000 to calculate the future value of annuities using different interest rates over varying time periods. The table allows the user to look up the present value factor for any number of periods at any whole percentage interest rate between 1% and 40%.
Tablas Financieras de Factor Valor Actual y Valor Futuro Anualidades y Cantid...emperatrizazul
The document contains a table showing the actual value of an annuity for different interest rates from 1% to 10% compounded annually over periods of 1 to 20 years. The table provides the formula to calculate the actual value of an annuity as (1 - (1 + i)-n) / i, where i is the interest rate and n is the number of years. It lists the actual value for varying interest rates and time periods.
1. The document presents a table with standardized normal distribution values including the z-score, the areas under the normal curve to the left and right of the z-score, and the ordinate value at that z-score.
2. It provides the z-score from 0 to 0.725 in increments of 0.005 and the corresponding standard normal distribution values.
3. The table is referenced from the textbook "Fundamental Statistics In Psychology and Education" by Guilford and Fruchter published in 1978.
The document discusses the results of analyzing the forecasting performance of the Euro Zone Economic Outlook (EZEO), which provides quarterly economic forecasts for the Euro area. The analysis uses standard accuracy measures to evaluate the one-step, two-step, and three-step ahead forecasts of inflation, GDP, industrial production, consumption, and investment. Preliminary results show the EZEO forecasts are often statistically unbiased and efficient at shorter horizons, but efficiency declines at longer horizons. Statistical tests also suggest the consensus EZEO forecasts are more accurate than the individual country forecasts.
SPICE MODEL of ZR6DC_RL=22(Ohm) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document contains acceleration time history data from an earthquake that occurred on October 16, 1979 at 6:58 AM near Westmoreland, California. It provides 8000 data points measuring acceleration in units of g (gravitational acceleration) recorded by station 5169 of the California Department of Mines and Geology.
This document provides the minimum "Z-scores" required for admission to various university courses of study in Sri Lanka for the 2012/2013 academic year, based on results from the 2012 G.C.E. Advanced Level examination. Z-scores are provided for each district in Sri Lanka for courses such as medicine, engineering, commerce, and arts. Some districts did not have any qualified candidates that met the minimum requirements for certain courses. The courses listed included both science and arts-based fields across multiple universities in Sri Lanka.
The document appears to contain statistical data organized into a table with over 100 rows and columns. It includes values ranging from around 1.5 to over 250. The data is grouped into categories including degrees of freedom, sample sizes ranging from 1 to over 10,000, and values in increments of 1 from 1 to 30 or more.
This document provides a table showing the present value of a 1 unit annual annuity for "n" periods using interest rates from 1% to 40%. It was created by Angel Higuerey Gómez in November 2000 to calculate the future value of annuities using different interest rates over varying time periods. The table allows the user to look up the present value factor for any number of periods at any whole percentage interest rate between 1% and 40%.
Tablas Financieras de Factor Valor Actual y Valor Futuro Anualidades y Cantid...emperatrizazul
The document contains a table showing the actual value of an annuity for different interest rates from 1% to 10% compounded annually over periods of 1 to 20 years. The table provides the formula to calculate the actual value of an annuity as (1 - (1 + i)-n) / i, where i is the interest rate and n is the number of years. It lists the actual value for varying interest rates and time periods.
1. The document presents a table with standardized normal distribution values including the z-score, the areas under the normal curve to the left and right of the z-score, and the ordinate value at that z-score.
2. It provides the z-score from 0 to 0.725 in increments of 0.005 and the corresponding standard normal distribution values.
3. The table is referenced from the textbook "Fundamental Statistics In Psychology and Education" by Guilford and Fruchter published in 1978.
The document discusses the results of analyzing the forecasting performance of the Euro Zone Economic Outlook (EZEO), which provides quarterly economic forecasts for the Euro area. The analysis uses standard accuracy measures to evaluate the one-step, two-step, and three-step ahead forecasts of inflation, GDP, industrial production, consumption, and investment. Preliminary results show the EZEO forecasts are often statistically unbiased and efficient at shorter horizons, but efficiency declines at longer horizons. Statistical tests also suggest the consensus EZEO forecasts are more accurate than the individual country forecasts.
SPICE MODEL of ZR6DC_RL=22(Ohm) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document contains acceleration time history data from an earthquake that occurred on October 16, 1979 at 6:58 AM near Westmoreland, California. It provides 8000 data points measuring acceleration in units of g (gravitational acceleration) recorded by station 5169 of the California Department of Mines and Geology.
The document appears to contain numerical data in a table format organized with 4 columns and multiple rows. The first column contains numbers incrementing by 1 from 0 to 191. The second through fourth columns contain numerical values that also increment at varying levels through the rows. The data likely describes some type of test or measurement results collected over multiple time periods.
The document contains two tables. The first table provides the compound interest factors (1 + i)^n for interest rates ranging from 1-10% and time periods of 1-20 years. The second table provides the present value and future value factors for a uniform series for interest rates of 1-10% and time periods of 1-20 years.
Tabla de factores de descuento flujos constantesDiego Oviedo
1. The table shows interest rates for constant cash flows over different years.
2. Interest rates decrease as the number of years increases, with the highest rates for early years and lowest for later years.
3. The table has 24 rows representing years 1 through 24 and columns for the interest rate and accumulated interest each year.
Атестація прокурорів: ГПУ оприлюднила нові результатиPravotv
The document contains the results of an anonymous computer-based test to determine the level of knowledge and skills in applying the law and fulfilling the powers of a prosecutor. It lists login IDs, scores, and rankings of 411 participants. The highest score was 99 and the lowest was 70.
The document contains a table with critical values for the F-test (Fisher's criterion) at α=5% for different numbers of degrees of freedom. It lists the critical values of the F-distribution for various combinations of degrees of freedom in the numerator (kбільш) and denominator (kменш) of the F-ratio. The table provides critical values from 1 to 110 degrees of freedom in both the numerator and denominator.
The table provides critical values for the Pearson chi-squared test (χ2) based on the level of significance and degrees of freedom (k). The higher the value of k and the lower the significance level, the higher the critical value. For example, with k=10 and a significance level of 5%, the critical value is 18.307.
The document contains two columns of numbers. The first column appears to list percentile values from 0 to 100 in increments of 0.1. The second column lists corresponding z-score values for each given percentile. The table provides a way to convert between percentiles and z-scores for common statistical calculations and analyses.
This document provides contact information for the Small and Medium Enterprises Development Authority (SMEDA) in Pakistan, including phone numbers and email addresses for various regional help desks. It aims to help small and medium business owners get assistance from SMEDA. The document disclaims any liability for actions taken based on the information provided and directs readers to SMEDA's website for full details.
This document contains a table with statistical data showing the standard normal distribution. The table lists z-scores ranging from -3.9 to 2.7 across the top and the corresponding probability values for each z-score listed down the left side. The probability values indicate the percentage of the distribution that falls below that z-score.
Danaher Corporation reported quarterly and annual sales and operating margin data for its Tools and Controls segments for an unaudited period. The Tools segment saw annual sales of $1.16 billion while the Controls segment generated $2.62 billion in annual sales. On an annual basis before restructuring, operating margins were 13.49% for Tools and 16.54% for Controls. After restructuring, the annual operating margin fell to 11.31% for Tools and 14.85% for Controls.
This document contains monthly financial data from 2014 for various categories such as mining, industry, construction, transportation, communications and others. It provides the revenue, expenditures, profits and other financial figures for each sector in each month of the year. The data is presented in a table with columns for the category, monthly figures, and a total for the year.
The document appears to be a table containing statistical data with right tail probabilities for the t distribution. The table includes degrees of freedom (df) ranging from 1 to 30 across the top. Under each df is a column of p-values ranging from 0.40 to 0.0005. The body of the table contains the corresponding t-statistic for each intersection of df and p-value. Below the table is a website url and email for an organization called Marketing Utopia.
The document contains two tables (A and B) related to probability and statistics. Table A provides the standard normal distribution probabilities for different z-values. Table B lists the critical values of the Student's t-distribution for various probabilities and degrees of freedom. The t-table provides the t-value required to obtain a given probability for the corresponding degrees of freedom.
The document appears to contain 100 rows of numerical data organized into 6 columns. It includes statistics like the sum, mean, mode, and median calculated across the columns. The data ranges from -4.18 to 10 with most values clustered between -3 and 3.
Hr gyb aug2014 - top genomicos holsteinKátya Castro
The document lists genomic young bulls ranked by their Genomic Total Performance Index (GTPI). The top 3 bulls are DE-SU HALOGEN 12342-ET with a GTPI of 2760, PLAIN-KNOLL RDGR MODEST1-ET with a GTPI of 2718, and COOKIECUTTER MONT 12063-ET with a GTPI of 2673. The document provides information on each bull's registration number, name, requester, birth date, and rankings for various traits that contribute to their GTPI.
Beijing Huanqiu Guangyang Bearings Co.,Ltd(GPZ Bearing), the professional manufacturer and exporter of high quality ball and roller bearings with more than 20 years of experience to meet the customers require.
We have won good market in Eastern European countries,Southeast Asia,American countries.
Choose GPZ Bearing to won your market based on quality guarantee.
We thank you for your attention and look forward to the cooperation with you!
Sincerely Yours,
Alan Yu
Export Manager
BEIJING HUANQIU GUANGYANG BEARINGS CO.,LTD
Tel:86-15101602678
Fax:86-319-6112678
Cell: 86-15032602678/ 15354192678
Email: alan@gpzbearing.com
Yahoo: gpzbearing@yahoo.com
MSN: gpzbearing@live.com
Gmail: gpzbearing@gmail.com
Skype: gpzbearing
Web: www.gpzbearing.com / www.gpzbearing.net
1. The document contains a table of critical values for the F distribution with an alpha value of 0.05.
2. The table lists the critical values across different degrees of freedom for the numerator and denominator.
3. Critical values range from 161.4 to 249.3 depending on the degrees of freedom.
This document appears to contain a table of binomial probabilities. It lists values of p (probability of success) from 0.01 to 0.99 across the top and values of n (number of trials) from 1 to 14 down the left side. Within the body of the table are values that represent the probability of getting x successes in n trials given the probability p of success on each trial. The table provides precise probabilities for a wide range of binomial probability distributions.
SPICE MODEL of ZR6DC_RL=8.2(Ohm) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document contains a table of critical values for the chi-square distribution with degrees of freedom (df) ranging from 0 to 136 and significance levels of 0.1, 0.05, 0.025, 0.001, and 0.005. The table lists the critical value that corresponds to each combination of df and significance level.
The document discusses potential names for a music magazine, including "Plural", "Infinite", "Stream", and "Fusion". It analyzes the meanings and connotations of each name. The author decides on "Plural" as the name for the magazine because it appropriately conveys that the magazine will cover multiple music genres and topics, and it received the most votes in an online poll.
This document summarizes a project on using text analytics of news to provide relevant information to traders. It collected news articles from RSS feeds and analyzed the data to identify fresh versus stale news using support vector machines. It also used topic modeling techniques like LDA and SPCA to isolate news about specific asset classes like oil and then used regression models to analyze the impact of news on asset price movements. The results showed ridge regression and iterative hard thresholding could successfully identify keywords that predicted positive and negative returns. The project provided a proof of concept for automatically analyzing news to help traders make informed decisions.
The document appears to contain numerical data in a table format organized with 4 columns and multiple rows. The first column contains numbers incrementing by 1 from 0 to 191. The second through fourth columns contain numerical values that also increment at varying levels through the rows. The data likely describes some type of test or measurement results collected over multiple time periods.
The document contains two tables. The first table provides the compound interest factors (1 + i)^n for interest rates ranging from 1-10% and time periods of 1-20 years. The second table provides the present value and future value factors for a uniform series for interest rates of 1-10% and time periods of 1-20 years.
Tabla de factores de descuento flujos constantesDiego Oviedo
1. The table shows interest rates for constant cash flows over different years.
2. Interest rates decrease as the number of years increases, with the highest rates for early years and lowest for later years.
3. The table has 24 rows representing years 1 through 24 and columns for the interest rate and accumulated interest each year.
Атестація прокурорів: ГПУ оприлюднила нові результатиPravotv
The document contains the results of an anonymous computer-based test to determine the level of knowledge and skills in applying the law and fulfilling the powers of a prosecutor. It lists login IDs, scores, and rankings of 411 participants. The highest score was 99 and the lowest was 70.
The document contains a table with critical values for the F-test (Fisher's criterion) at α=5% for different numbers of degrees of freedom. It lists the critical values of the F-distribution for various combinations of degrees of freedom in the numerator (kбільш) and denominator (kменш) of the F-ratio. The table provides critical values from 1 to 110 degrees of freedom in both the numerator and denominator.
The table provides critical values for the Pearson chi-squared test (χ2) based on the level of significance and degrees of freedom (k). The higher the value of k and the lower the significance level, the higher the critical value. For example, with k=10 and a significance level of 5%, the critical value is 18.307.
The document contains two columns of numbers. The first column appears to list percentile values from 0 to 100 in increments of 0.1. The second column lists corresponding z-score values for each given percentile. The table provides a way to convert between percentiles and z-scores for common statistical calculations and analyses.
This document provides contact information for the Small and Medium Enterprises Development Authority (SMEDA) in Pakistan, including phone numbers and email addresses for various regional help desks. It aims to help small and medium business owners get assistance from SMEDA. The document disclaims any liability for actions taken based on the information provided and directs readers to SMEDA's website for full details.
This document contains a table with statistical data showing the standard normal distribution. The table lists z-scores ranging from -3.9 to 2.7 across the top and the corresponding probability values for each z-score listed down the left side. The probability values indicate the percentage of the distribution that falls below that z-score.
Danaher Corporation reported quarterly and annual sales and operating margin data for its Tools and Controls segments for an unaudited period. The Tools segment saw annual sales of $1.16 billion while the Controls segment generated $2.62 billion in annual sales. On an annual basis before restructuring, operating margins were 13.49% for Tools and 16.54% for Controls. After restructuring, the annual operating margin fell to 11.31% for Tools and 14.85% for Controls.
This document contains monthly financial data from 2014 for various categories such as mining, industry, construction, transportation, communications and others. It provides the revenue, expenditures, profits and other financial figures for each sector in each month of the year. The data is presented in a table with columns for the category, monthly figures, and a total for the year.
The document appears to be a table containing statistical data with right tail probabilities for the t distribution. The table includes degrees of freedom (df) ranging from 1 to 30 across the top. Under each df is a column of p-values ranging from 0.40 to 0.0005. The body of the table contains the corresponding t-statistic for each intersection of df and p-value. Below the table is a website url and email for an organization called Marketing Utopia.
The document contains two tables (A and B) related to probability and statistics. Table A provides the standard normal distribution probabilities for different z-values. Table B lists the critical values of the Student's t-distribution for various probabilities and degrees of freedom. The t-table provides the t-value required to obtain a given probability for the corresponding degrees of freedom.
The document appears to contain 100 rows of numerical data organized into 6 columns. It includes statistics like the sum, mean, mode, and median calculated across the columns. The data ranges from -4.18 to 10 with most values clustered between -3 and 3.
Hr gyb aug2014 - top genomicos holsteinKátya Castro
The document lists genomic young bulls ranked by their Genomic Total Performance Index (GTPI). The top 3 bulls are DE-SU HALOGEN 12342-ET with a GTPI of 2760, PLAIN-KNOLL RDGR MODEST1-ET with a GTPI of 2718, and COOKIECUTTER MONT 12063-ET with a GTPI of 2673. The document provides information on each bull's registration number, name, requester, birth date, and rankings for various traits that contribute to their GTPI.
Beijing Huanqiu Guangyang Bearings Co.,Ltd(GPZ Bearing), the professional manufacturer and exporter of high quality ball and roller bearings with more than 20 years of experience to meet the customers require.
We have won good market in Eastern European countries,Southeast Asia,American countries.
Choose GPZ Bearing to won your market based on quality guarantee.
We thank you for your attention and look forward to the cooperation with you!
Sincerely Yours,
Alan Yu
Export Manager
BEIJING HUANQIU GUANGYANG BEARINGS CO.,LTD
Tel:86-15101602678
Fax:86-319-6112678
Cell: 86-15032602678/ 15354192678
Email: alan@gpzbearing.com
Yahoo: gpzbearing@yahoo.com
MSN: gpzbearing@live.com
Gmail: gpzbearing@gmail.com
Skype: gpzbearing
Web: www.gpzbearing.com / www.gpzbearing.net
1. The document contains a table of critical values for the F distribution with an alpha value of 0.05.
2. The table lists the critical values across different degrees of freedom for the numerator and denominator.
3. Critical values range from 161.4 to 249.3 depending on the degrees of freedom.
This document appears to contain a table of binomial probabilities. It lists values of p (probability of success) from 0.01 to 0.99 across the top and values of n (number of trials) from 1 to 14 down the left side. Within the body of the table are values that represent the probability of getting x successes in n trials given the probability p of success on each trial. The table provides precise probabilities for a wide range of binomial probability distributions.
SPICE MODEL of ZR6DC_RL=8.2(Ohm) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
This document contains a table of critical values for the chi-square distribution with degrees of freedom (df) ranging from 0 to 136 and significance levels of 0.1, 0.05, 0.025, 0.001, and 0.005. The table lists the critical value that corresponds to each combination of df and significance level.
The document discusses potential names for a music magazine, including "Plural", "Infinite", "Stream", and "Fusion". It analyzes the meanings and connotations of each name. The author decides on "Plural" as the name for the magazine because it appropriately conveys that the magazine will cover multiple music genres and topics, and it received the most votes in an online poll.
This document summarizes a project on using text analytics of news to provide relevant information to traders. It collected news articles from RSS feeds and analyzed the data to identify fresh versus stale news using support vector machines. It also used topic modeling techniques like LDA and SPCA to isolate news about specific asset classes like oil and then used regression models to analyze the impact of news on asset price movements. The results showed ridge regression and iterative hard thresholding could successfully identify keywords that predicted positive and negative returns. The project provided a proof of concept for automatically analyzing news to help traders make informed decisions.
Nicola Gourlay has broad experience in both the private and public sectors, including geospatial information systems, logistics, administration, and conservation. She provides strategic support and input to planning objectives through strong GIS, logistics, and leadership skills. Currently she is managing geospatial information and workflows for the Great White Butterfly Eradication Project.
Recap of workshop given at ThingsCon Amsterdam, Dec 4, 2015.
Workshop description:
In this technique, executives are first introduced to near-future IoT scenarios grounded in human experience. They build littleBits circuits and augment objects in a ‘collaborative demo’, to develop a visceral sense for the possibilities of connected devices. Then they use collaborative tools to extend these IoT concepts to their own business and identify strategic opportunities.
This document outlines a student-researcher's action research project on supporting the needs of Korean international high school students through group counseling. The student-researcher implemented two cycles of support groups with 12 Korean international students over 8 weekly sessions. Data was collected through questionnaires, interviews, journals and feedback. Results indicated the groups helped students feel less isolated and more comfortable discussing challenges. Limitations included a lack of literature on this topic and short time frame. The student-researcher learned building rapport is key and plans to advocate for international students and continue educating themselves.
Derecho de daños, igualdad y justicia distributiva.AUTOR: Tsachi Keren-Paz.IS...Marcial Pons Argentina
Este documento presenta un marco teórico para analizar cómo los principios de igualdad y justicia distributiva pueden influir en el derecho de daños. Se divide en seis capítulos que discuten estos temas: 1) Introducción, 2) Marco teórico sobre justicia distributiva, igualitarismo y derecho de daños, 3) Defensa de la postura normativa de incorporar consideraciones igualitarias en el derecho de daños, 4) Marco de aplicación, 5) Estándar de diligencia, 6) Deber de cuidado.
Este documento contiene una prueba diagnóstica sobre conceptos básicos de informática y tecnología dirigida a estudiantes de grado 10. La prueba incluye preguntas sobre hardware, software, sistemas operativos, periféricos, componentes de una CPU, almacenamiento de datos, internet, correo electrónico, redes sociales, office y presentaciones multimedia. Al final, se pide a los estudiantes identificar sus falencias en el área de tecnología e informática.
This document does not provide any apparent essential information in 3 sentences or less. It consists of a series of blank lines without any text content.
Research methodology and medical statistics book previewarmarcayurveda
Present book covers the 100% syllabus of BAMS, 80% syllabus of MD (Ayu), 80% of MBBS, 80-90% for B.Pharma and M.Pharma for Research Methodology and Biostatistics...
Contact: Dr. Prashant Kumar Jha - 09742424407 (India)
Aber schnell! Top HTML5 Performance Tipps für Hybrid- und Web-AppsGregor Biswanger
HTML5 ist langsam, oder? Nein, in der Tat zeigt sich die grundlegende Geschwindigkeit von Cross-Plattform-HTML5-Anwendungen heutzutage in einem sehr positiven Licht. Es gibt aber doch ein paar Fallstricke, in denen sich der Entwickler schnell verfängt, wenn er nicht auf ein paar Punkte achtet. Der Vortrag geht zuerst auf die Vorgehensweise der Performancemessung ein. Anschließend werden die Top Performance-Tipps gezeigt, um nochmal einen ordentlichen Schub an Power herausholen zu können. Lassen Sie uns Gas geben!
Production forecast and fuel 2020 rev00.pdfssuserb71d4d
The document provides production forecasts and fuel consumption estimates for RKAB for 2020. It includes forecasts of overburden removal and coal production by month. It also provides estimates of existing fleet capacity and production targets. Fuel consumption is estimated at 992,000 liters for the year using the existing fleet.
This document provides specifications for HADLEY UltraZEDTM 2 and UltraBEAMTM 2 metal roof purlins and cladding rails. It includes section properties, dimensions, load tables, and design guidelines for various roof configurations including flat, curved, mono-pitched and steep roofs. Details are also provided for applications such as eaves beams, trimmers, lateral restraints, and support of cladding, windows, doors and parapets.
Sample Calculations for solar rooftop project in Indiadisruptiveenergy
This document provides a financial analysis of a proposed solar PV rooftop project over 25 years. It outlines key steps and parameters to consider, including net metering rules, installation costs, internal rate of return, return on investment, payback period, lifetime savings, and discount rate. Tables show projected annual energy generation, costs, revenues, and financial metrics to help evaluate the project's feasibility and profitability. The analysis aims to help consumers make informed decisions without being misled by inaccurate information from solar companies or officials.
Kedia daily evening report as on 08052020Ajay Kedia
The document appears to be a market report containing commodity prices and trading data. It includes closing prices and percentage changes for various commodities such as gold, silver, crude oil, and base metals. It also lists economic data, currency exchange rates and trading status updates for different commodity contracts.
The document contains a series of numbers ranging from 5.961 to 6.345. It then provides statistical analysis of these numbers including calculations of minimum, maximum, range, number of intervals, mean, standard deviation, variance and limits. Two histograms are presented with the data divided into classes and the corresponding frequencies. Measures of central tendency, dispersion and process capability are reported.
The document summarizes a project to improve the Cp and Cpk of roll crowning through reducing variation in roll profiles. It outlines the current process performance including high standard deviation and sigma rating of 1.11-2.76. Modifications were made to the data collection process and a measurement system study was conducted to analyze gauge repeatability and reproducibility. A cause and effect study identified a relationship between roll profile variation and moisture content deviation in the paper. The goal is to improve the sigma rating from the current 2.25 to 2.65 through applying DMAIC methodology to identify and implement solutions.
Review W 26 & Plan Week 27 2022_MUM.pptxssuserb71d4d
The document contains a production review and plan for Week 26 and Week 27 at the JOB SITE BAS – TANJUNG ENIM site for PT MANGGALA Engineering Department. It includes production data from all pits, equipment allocation and availability, productivity analysis, and production projections showing expected overburden removal of 143,585 BCM for Week 27. Safety topics and schedules are also included.
The document reports the results of a laser scan inspection of part wm025867-0002. A total of 4172081 data points were captured and 11894 were identified as outliers. The maximum deviation was 1.74 mm and the average deviation was 0.08/-0.12 mm. Annotation views 1-5 identify 30 points (A001-A030) by their X, Y, Z coordinates and deviation from reference in mm. All points were within the tolerance of +/-0.5 mm.
This document provides specifications for API drill pipe and tool joint combinations, including:
- Outside diameter, wall thickness, inside diameter, grade, and connection type for various pipe sizes
- Outside diameter, inside diameter, length, and connection number/size for tool joints
- Recommended makeup torque values for different pipe and tool joint combinations
It contains technical specifications for drill pipe and tool joints ranging from 2-3/8 inches to 7 inches in outer diameter.
Como se utiliza la tabla t de student (formulas)Zully HR
The document contains tables of values with increasing levels from 0.55 to 0.995. The values seem to correspond to statistical calculations for levels of significance and critical values.
The document contains tables of values with increasing levels from 0.55 to 0.995. The values seem to relate to statistical calculations for determining critical values and levels of significance across different sample sizes and distributions.
Wireline (WL) and Logging-While-Drilling (LWD) formation tester measurements provide a link between the static petrophysical measurements and dynamic rock-fluid properties for enhanced formation evaluation. However, despite the significant advancements in these services, there are still barriers. The analysis of Wireline (WL) and Logging-While-Drilling (LWD) formation testing has traditionally been performed by a skilled testing analyst using specialized software and theoretical models to generate results and assess the data vitality. This can be a time-consuming process involving analyzing over 100 pressure transients. In practice, the petrophysicists and geoscientists rarely have access to a detailed analysis in the time frame required and typically revert to other methods. Some of the methods are ad hoc, but there is a growing consensus that several convenient, simple, and effective real-time measurements can be used for an objective evaluation of the dynamic data. This talk demonstrates a straightforward automated process that has been developed by which real-time measurements, which are routinely recorded, are used to automatically generate the results. Basic principles are used to develop quality parameters and a test rating system that can guide the analyst in the objective determination of the vitality of the results for each test. In this way, the highest quality testing results are used for fluid gradients and log correlations to improve the integration of the dynamic data into the petrophysical analysis. This also enables standards to be established for real-time data acquisition that can save testing time while improving data and quality. This automated method is being applied routinely and several field examples are used to illustrate the utility and time savings of this new workflow.
Como se utiliza la tabla t de student Irving THdez
This document provides a table of quantile values for different degrees of freedom. The table is used to define the Student's t-distribution, which is utilized in the analysis to distinguish between distinct quantile values for various levels of freedom. Specifically, the table is analyzed for a Student with 3 degrees of freedom, where the quantile is found to be approximately 0.8834 for a 90% confidence level. The quantile values allow distinguishing different confidence levels for statistical analyses with students t-distributions.
This document contains trigonometric tables that provide reference values for trigonometric functions like sine, cosine, and tangent at common angles in both radians and degrees. It includes a full table of trig values from 0 to 90 degrees/radians as well as a condensed table highlighting the most common angles.
This document contains trigonometric tables that provide reference values for trigonometric functions like sine, cosine, and tangent at common angles in both radians and degrees. It includes a full table of trig values from 0 to 90 degrees/radians as well as a condensed table highlighting the most common angles.
The document provides design details for the ground floor structure of a building project for client Syed Yusuf Ali. It includes job information, coordinates of 67 nodes, member incidences of 157 elements, material properties, support conditions, dead and live load cases, and results of the structural analysis and concrete design for beams and columns. The design is only for the ground floor due to technical difficulties including the first floor.
DEEP CHAND DAYAL CHAND & COMPANY is based in the New Delhi (INDIA) since 1955 and is one of the largest importers and wholesalers of bearings throughout INDIA . DCDC is the Sole Importers of FLT Ball Bearing from Poland & Pillow Block Bearings from China .The company specializes mainly in Chinese, Polish and Indian branded products. Our stocks are located centrally in the New Delhi and distribute throughout INDIA.
This document contains a summary of areas in square meters and volumes in cubic meters from earthwork projects including cuts, fills, and distances. It includes 25 lines of area and volume calculations with values ranging from 0 to 2644.847 square meters for areas and 0 to 10099.452 cubic meters for accumulated volumes.
The document lists pricing information for various encoder models from Mecapion in USD and VND currencies. It includes the resolution range and sale price for over 50 encoder types across several series, including the S30, S40, S48, S58, S66, S68, S78, SM80, SA58, H35, H40, H45, H60, H62, H70, H88, H100, H108, H120, H128 series, as well as servo encoders and SPM models. Additional notes specify that encoders include a 1m cable by default, with extra fees for longer cables, and price variations for different power supply voltages and coupling options.
Similar to Yıdız Teknik Üniversitesi - Rüzgr Günleri Sunum - 29032016 (20)
3. KINTECH ENGINEERING HK.
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
• %100 bağımsız şirket yapısı
• %100 in-house teknoloji
• 15 yılın üzerinde meteorolojik ölçüm
tecrübesi
• 6000’in üzerinde data logger satışı
• 9 farklı ülkede 30’un üzerinde uluslararası
çalışan
4. RÜZGAR SANTRALİ GELİŞTİRME
Bahadır Bulut | Sales Engineer, Turkey
sales.turkey@kintech-engieering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Site Selection
Pre selection of area
Electrical grid access
Environmental
feasibility
Wind resources
Site visits
Meteorological
Measurements
Installation of
Measurement Mast
Permission of land
Purchasing
equipment
Commisioning
-> Operating of
Measurement Mast
Feasibility
Studies
->Site Assessment
Wind farm lay outs
Wind resources
and energy yield
reports
Uncertainty
assessment
Engineering
Process
-> Engineering Projects
Electrical projects
Civil work, design
Electrical lines,
substations,
grid integration
Administrative
Process
-> Permits
Grid connection
permits
Wind data
certifications
- Land Permits
Financing
-> Wind turbine
suitability, classes
Technical due
deligence
Operation
-> Monitoring
Performance tests
O & M activities
Environmental
survey
7. Windvane - Yön Ölçer (V / Ω)
Potansiyometriklerde kısa devreyi
önlemek için dead band kaçınılmazdır,
bu durumda ölü alan hakim rüzgar yönü
tersine kalibre edilmeli !
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
8. Sıcaklık & Nem Ölçer (V)
F = A x V + B
A = slope
B = offset
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
9. Basınç Ölçer (V)
F = A x V + B
A = slope
B = offset
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
14. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Zaman Serisi
• Kontroller yapılırken
zaman serisi ve
korelasyon grafikleri
hızlı bir görüş
sağlayacaktır
15. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Korelasyon
• Farklı yüksekliklerdeki
anemometreler
arasındaki 10 dk’lık
farklar fazla olmamalı.
16. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Gölge Etkisi
http://www.iawe.org/Proceedings/11ACWE/11ACWE-Lubitz.pdf
17. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Gölge Etkisi
http://www.iawe.org/Proceedings/11ACWE/11ACWE-Lubitz.pdf
23. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Vertical Wind Profile – Düşey Rüzgar Profili
POWER LAW
v / vo = (h / ho)α
v = h yüksekliğindeki hız (m/s)
vo = ho yüksekliğindeki hız (m/s)
α = the wind shear exponent (Rüzgar değişimi katsayısı)
24. Rüzgar Verisi ve Analizi – Rüzgar Hızı
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Vertical Wind Profile – Düşey Rüzgar Profili
Example - Wind Velocity in a Terrain with Several Buildings
With a Wind Shear Exponent 0.25 and wind velocity at level 10 m measured to 5 m/s - wind velocity at level 40 mcan be estimated
by transforming (1) to
v = (h / ho)α vo (1b)
Substituting with values
v = ((40 m) / (10 m))0.25 (5 m/s)
= 7.1 m/s
27. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Rutin Kontroller
Temel ve rutin kontrol olarak her zaman için:
- 0 <= Yo <=360
Olmalıdır.
28. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Zaman Serisi
30. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Rüzgar Yönü Standart Sapması
• Yüksek rüzgar
hızlarında yönün
standart sapmasının
küçük olması
beklenir.
31. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Rüzgar Yönü Buzlanması veya Donması
• Rüzgar yönünde
buzlanma veya donma
olduğu durumlarda uzun
süreler için aynı ortalama
değerleri veya çok düşük
hatta «0» standart
sapma değerleri
gözlemlenebilir.
33. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Bağlantı hatası
0
30
60
90
120
150
180
210
240
270
300
330
360
00:00 01:12 02:24 03:36 04:48 06:00 07:12 08:24
Derece
Zaman
Ana yön ve Ters bağlanmış yön
Ana Yön
Ters Bağlanmış Yön
34. Rüzgar Verisi ve Analizi – Rüzgar Yönü
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Rüzgar yönü doğrulama – Radar grafikler
• Ölçüm direğindeki yön
sensörlerin kendi içinde
kısaylaması
• Uzun dönem veri ile
doğrulanması (Merra,
NCAR vb…)
35. Rüzgar Verisi ve Analizi
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Türbülans ve engellerin etkisi
36. Rüzgar Verisi ve Analizi
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Türbülans ve engellerin etkisi
37. Rüzgar Verisi ve Analizi
Bahadır Bulut | Sales Engineer, Turkey
turkey@kintech-engineering.com
+90 (232) 388 3000 (Dahili 1) / +90 (532) 207 8124
Türbülans ve engellerin etkisi