Wheel and axle
•Download as PPTX, PDF•
1 like•1,116 views
The wheel and axle is a simple machine consisting of a wheel locked to a central axle, such that when a force is applied to either one, both rotate together. It provides mechanical advantage by increasing either the resistance force that can be overcome or the distance an object can be moved using a given effort. Common examples of wheel and axle systems include door knobs, wheelbarrows, and wagons.
Report
Share
Report
Share
Recommended
Wheel and axle
The document discusses the wheel and axle simple machine. It consists of a rod attached to a wheel so that their movements are coupled. When the axle turns, the outside of the wheel turns at a greater linear speed due to their equal rotational speeds. The wheel and axle provides mechanical advantage and is used to either multiply force or distance in systems like doorknobs, bicycles, and cars. Its mechanical advantage is calculated as the ratio of the wheel's radius to the axle's radius.
Wheel and axle
The document discusses the wheel and axle, which is a type of simple machine and lever found in the body. A wheel and axle consists of a wheel attached to an axle so they rotate together, allowing force to be transferred between them. It is typically used to increase force and lift weights, with examples being bicycle wheels, doorknobs, and steering wheels. The mechanical advantage of a wheel and axle is calculated as the ratio of the radius of the wheel to the radius of the axle.
Simple machines and gears
An slideshare presentation of simple machines, gears, mechanical advantage, velocity ratios and pulley systems.
Cycling
Cycling involves riding a bicycle and includes various parts that transmit force from the cyclist's pedaling to the rear wheel. The power train includes the chain, cranks, and pedals that connect to the rear gears. Derailleurs allow changing gears to adapt to conditions by moving the chain between sprockets. Competitive cycling includes racing bicycles on roads in stages or sprints and performing acrobatics on bicycles designed for cross-country, downhill, or BMX riding.
Final Project Differential Equations - Roller Coaster
Eject based on mathematical concepts and ideas to explain how a roller coaster works and how does Differential Equations apply to it.
Gears
This document discusses different types of gears used in robotics, including spur gears, idler gears, bevel gears, worm gears, and belts and pulleys. Spur gears change speed, torque, and direction of rotation and come in different sizes that determine gear ratios. Idler gears don't change gear ratios but can add spacing between gears or make gears rotate in the same direction. Bevel gears are perpendicular like worm gears, which have a very large gear ratio of 1:24. Belts and pulleys also change speed and torque but transfer force through friction rather than direct contact.
Mechanisms
This document discusses different types of simple machines and mechanisms that make life easier for humans. It describes how wheels were developed over time from log rollers to solid wheels to spoked wheels. It also mentions the use of animal power and levers as simple machines that increase mechanical advantage. Finally, it briefly outlines different types of gears and motions like linear and rotational.
Basic mechanisms
A mechanism uses two or more interacting pieces to change the type, direction, speed, or amount of force of a machine's motion. Common mechanisms include gears, pulleys, cams, and linkages that convert between rotational and linear motion. Mechanisms are widely used throughout machinery and vehicles to transfer motion and power between different components.
Recommended
Wheel and axle
The document discusses the wheel and axle simple machine. It consists of a rod attached to a wheel so that their movements are coupled. When the axle turns, the outside of the wheel turns at a greater linear speed due to their equal rotational speeds. The wheel and axle provides mechanical advantage and is used to either multiply force or distance in systems like doorknobs, bicycles, and cars. Its mechanical advantage is calculated as the ratio of the wheel's radius to the axle's radius.
Wheel and axle
The document discusses the wheel and axle, which is a type of simple machine and lever found in the body. A wheel and axle consists of a wheel attached to an axle so they rotate together, allowing force to be transferred between them. It is typically used to increase force and lift weights, with examples being bicycle wheels, doorknobs, and steering wheels. The mechanical advantage of a wheel and axle is calculated as the ratio of the radius of the wheel to the radius of the axle.
Simple machines and gears
An slideshare presentation of simple machines, gears, mechanical advantage, velocity ratios and pulley systems.
Cycling
Cycling involves riding a bicycle and includes various parts that transmit force from the cyclist's pedaling to the rear wheel. The power train includes the chain, cranks, and pedals that connect to the rear gears. Derailleurs allow changing gears to adapt to conditions by moving the chain between sprockets. Competitive cycling includes racing bicycles on roads in stages or sprints and performing acrobatics on bicycles designed for cross-country, downhill, or BMX riding.
Final Project Differential Equations - Roller Coaster
Eject based on mathematical concepts and ideas to explain how a roller coaster works and how does Differential Equations apply to it.
Gears
This document discusses different types of gears used in robotics, including spur gears, idler gears, bevel gears, worm gears, and belts and pulleys. Spur gears change speed, torque, and direction of rotation and come in different sizes that determine gear ratios. Idler gears don't change gear ratios but can add spacing between gears or make gears rotate in the same direction. Bevel gears are perpendicular like worm gears, which have a very large gear ratio of 1:24. Belts and pulleys also change speed and torque but transfer force through friction rather than direct contact.
Mechanisms
This document discusses different types of simple machines and mechanisms that make life easier for humans. It describes how wheels were developed over time from log rollers to solid wheels to spoked wheels. It also mentions the use of animal power and levers as simple machines that increase mechanical advantage. Finally, it briefly outlines different types of gears and motions like linear and rotational.
Basic mechanisms
A mechanism uses two or more interacting pieces to change the type, direction, speed, or amount of force of a machine's motion. Common mechanisms include gears, pulleys, cams, and linkages that convert between rotational and linear motion. Mechanisms are widely used throughout machinery and vehicles to transfer motion and power between different components.
Lecture 02: Locomotion
This document discusses various forms of locomotion including crawling, sliding, running, jumping, walking and rolling. It covers relationships between different types of locomotion like swimming to walking. Forms of locomotion found in nature like a horse's gallop are discussed as well as how robots are starting to imitate natural locomotion. Characteristics of locomotion like stability and contact points are examined. Specific locomotion types like walking, wheeled locomotion, and climbing are described in detail. The document concludes by discussing actuators and encoders used for locomotion and providing homework on further exploring locomotion concepts.
GEAR BOX PPT by -vadiyaR
Gears play an important role in vehicle transmission systems by controlling speed. Transmission systems include gears like ring and pinion gears that allow the engine to operate at high speeds while wheels turn slower. Transmission provides gear ratios to deliver high torque for starting, climbing hills, and accelerating. It allows neutral positioning to disconnect the engine and wheels. Transmission types include manual and automatic, with manual having sliding mesh gear boxes and automatic using epicyclic gear boxes, torque converters, and free wheeling units.
Differential in automobile
An automobile differential couples the drive shaft to the rear driving wheels. It allows the outer wheel to rotate faster than the inner wheel during a turn by splitting torque equally between the wheels. A differential consists of one input and two outputs for the two driving wheels. It allows the wheels to rotate at different speeds to accommodate turns while keeping the average rotational input equal to the drive shaft. Differentials are commonly used in automobiles but also have non-automotive applications like performing analog arithmetic or controlling gun aim. There are different types of differentials like epicyclic, spur gear, and bevel gear differentials.
Locomotion Systems
1. The document discusses different types of locomotion systems for mobile robots, including differential drive, car type drive, and skid steer drive.
2. It also covers actuators that convert electrical energy to mechanical motion, specifically DC motors which can be controlled to run in different directions and speeds.
3. Sensors that provide feedback are also mentioned as an important component for mobile robots.
Mechanisms
This document provides information about mechanisms and how they make life easier. It begins by posing the question "What are Mechanisms & How do they Make Our Lives easier?" and outlines different learning outcomes for understanding mechanisms. It then describes various common mechanisms like levers, linkages, gears, cranks, pulleys, racks and pinions, and chains/sprockets. For each mechanism, examples are given of how it works and products that use it. The document explains that mechanisms allow humans to perform tasks that would otherwise be impossible due to our limited strength, and transmit and change types of motion to make tasks easier.
Gears
This document discusses different types of gears and how they work. It begins by providing examples of how gears are used on bicycles to change speeds for climbing hills or traveling on flat roads. The main points are:
- Gears transmit power from one part of a machine to another and can increase or decrease speed and force.
- The six main types of gears described are spur gears, helical gears, rack and pinion gears, idler gears, worm and wheel gears, and bevel gears.
- Gear trains involve connecting multiple gears together and can be simple, compound, reverted, or epicyclic designs to transfer rotational motion between parallel or intersecting shafts.
Mechanisms - description v3
Mechanisms translate one type of motion into another. They include gears, belts, chains, and other components that transmit motion between parts of a machine. Gears can transmit rotational motion between parallel or perpendicular axles using different arrangements like spur gears, worm gears, and bevel gears. Belts and chains also transmit rotational motion between pulleys or sprockets on different axles. Other mechanisms like cranks, cams, and rack and pinion systems convert between rotational and linear motion.
Gear
Gears are rotating machine parts that transmit torque through their teeth. They produce mechanical advantage through their gear ratios, changing speed and torque. Early gears date back to ancient Greece and China. Gears are used to reverse direction, change speed, transfer motion to different axes, and synchronize rotation between axes. Common gear types include spur, helical, bevel, worm, and planetary gears. Gears have a wide range of applications from transmissions to clocks to mills.
Automatictransmission 180411144519
The document summarizes different types of automatic transmissions. It discusses torque converters, planetary gear sets, and four main types of automatic transmissions: traditional, automated manual, continuously variable, and dual clutch. A torque converter replaces a clutch to change gears hydraulically. Planetary gears provide gear reductions like underdrive and overdrive. Automated manual transmissions automate manual transmissions. Continuously variable transmissions use pulleys to provide infinite gear ratios. Dual clutch transmissions use two clutches to switch between gears more quickly.
Design of two stage planetary gear train for high reduction ratio
Abstract Planetary Gear Trains are extensively used for the power transmission and are the most critical component. Planetary gearboxes are used frequently to match the inertias, lower the motor speed, boost the torque, and at the same time provide a sturdy mechanical interface for pulleys, cams, drums and other mechanical components. This paper presents the advantages of planetary gear systems over other, consideration to be given while determining the reduction ratios of gear box, minimum and maximum reductions per stage of planetary gear pairs. Also the case study to determine the reduction ratio of two stage gear box is discussed. The comparison of planetary gear system over helical gears systems is done on the basis of volume, weight and torque density Keywords: Planetary Gears, Gear train, IS 4460, Torque density.
Automobile Differential Unit
Automobile differential unit explained with the types and general maintenance. Procedure involved in dis-assembly of differential unit is also explained. Then solutions for common problem in differential unit.
Hydraulic Braking System
The document summarizes a presentation on hydraulic braking systems. It discusses key components like the master cylinder, wheel cylinder, brake shoes, brake drum, and brake fluid. The system uses Pascal's law where pressure is equally distributed in all directions through the fluid. Hydraulic braking provides equal braking on all wheels, increased braking force, and flexibility. However, leakage or air in the system can cause whole system failure.
Chainless bicycle ppt presentation
This document describes the design of a shaft-driven bicycle as an alternative to chain-driven bicycles. A shaft-driven bicycle uses a drive shaft connected by spiral bevel gears to transmit power from the pedals to the rear wheel, replacing the chain. The objectives are to increase durability, reduce maintenance costs, improve efficiency, and reduce noise. Calculations are provided for the gearing and shaft design. Advantages include less jamming and protection of clothes, while disadvantages include increased weight. The conclusion is that shaft-driven designs can now match the efficiency of chain-driven bicycles.
Gear
The document discusses different types of gears used for power transmission, including their definitions, components, and applications. It describes spur gears, helical gears, herringbone gears, rack and pinion gears, bevel gears, worm gears, and different types of gear trains. The key points are that gears transmit rotational force from one shaft to another, common types include spur, helical, bevel and worm gears, and gear trains can reduce speed while increasing torque using multiple meshing gears.
Differential mechanism in cars
A homemade differential mechanism made by a team in our college to simplify the function of differentials in cars with low cost and high efficiency.this report is a fast reference to make a good background about this type of mechanisms.
Physics of bicycle
A bicycle is a human-powered vehicle with two wheels attached to a frame. A rider stays upright by steering to keep the point of contact underneath their center of gravity. The position of the center of mass between the rider and bike affects how much the front wheel must move to maintain balance. Bicycles experience internal forces from the rider and between components, and external forces from gravity, air resistance, and ground contact. Motions can be lateral like balancing or longitudinal like rolling forward.
Gear
This document discusses gears, including their types, nomenclature, applications, and gear trains. It describes common gear types like spur gears, helical gears, bevel gears, and worm gears. It defines gear terminology like pitch circle, diametral pitch, and module. It also explains different gear train configurations like simple, compound, and planetary gear trains and their applications.
The Physics of Bicycles
The document discusses the physics behind how bicycles work. It explains that pedaling provides torque that drives the rear wheel forward via the chain and gears. Having multiple gears allows riders to maintain an efficient cadence across different terrains and slopes. The stability of bicycles comes primarily from their trail geometry, where the front wheel contact point trails behind the steering axis. This causes any lean to self-correct, keeping the bicycle upright.
single pedal power grinder
The multipurpose machine that is ‘exercise bicycle’ which was basically used for exercising purpose has been modified for grinding. Source of power utilized for above purpose is pedal power. the process is relatively simple, small parts of the object is small grinder, using electric drive is not conducive to energy saving. according to the above technical solution, the operator holds the part to be machined, sit on the seat cushion, two feet on the foot pedal handle and rotate the handle, the handle foot drive shaft rotates, the first drive shaft on which two sprocket rotation, the second sprocket
Magnetic bearings
Magnetic bearings support a load using magnetic levitation rather than physical contact, reducing friction and wear. They consist of electromagnets, position sensors, and a controller to levitate the rotating shaft. Active magnetic bearings use electromagnets and external power, while passive ones use permanent magnets without external power. Applications include maglev trains, compressors, and artificial hearts due to their ability to operate at high speeds and in vacuums or high temperatures with minimal friction.
Freshman Engineering Design Reports 1 2 3
The document describes three design briefs for a Rube Goldberg device engineering project. The first brief discusses a wheel-and-axle simple machine that will propel a toy car forward to trigger the next event. The second brief covers an inclined plane and lever simple machine, where a golf ball will roll down the plane and impact the lever. The third brief outlines a pulley simple machine that will raise a flag when hit by a falling domino, and a magnetic force event using magnets to propel the wheel-and-axle. Testing showed all the simple machines and events worked as theoretically expected.
Good example Simple Machines
Simple machines include the pulley, inclined plane, lever, wedge, screw, and wheel and axle. A pulley uses a grooved wheel and rope to move loads, an inclined plane connects different levels with a slanting surface, and a lever lifts loads using a stiff bar resting on a fulcrum. A wedge cuts materials apart with a sharp edge, a screw holds things together or lifts materials using an inclined plane wrapped around a pole, and a wheel and axle lifts loads using a wheel with a central axle.
More Related Content
What's hot
Lecture 02: Locomotion
This document discusses various forms of locomotion including crawling, sliding, running, jumping, walking and rolling. It covers relationships between different types of locomotion like swimming to walking. Forms of locomotion found in nature like a horse's gallop are discussed as well as how robots are starting to imitate natural locomotion. Characteristics of locomotion like stability and contact points are examined. Specific locomotion types like walking, wheeled locomotion, and climbing are described in detail. The document concludes by discussing actuators and encoders used for locomotion and providing homework on further exploring locomotion concepts.
GEAR BOX PPT by -vadiyaR
Gears play an important role in vehicle transmission systems by controlling speed. Transmission systems include gears like ring and pinion gears that allow the engine to operate at high speeds while wheels turn slower. Transmission provides gear ratios to deliver high torque for starting, climbing hills, and accelerating. It allows neutral positioning to disconnect the engine and wheels. Transmission types include manual and automatic, with manual having sliding mesh gear boxes and automatic using epicyclic gear boxes, torque converters, and free wheeling units.
Differential in automobile
An automobile differential couples the drive shaft to the rear driving wheels. It allows the outer wheel to rotate faster than the inner wheel during a turn by splitting torque equally between the wheels. A differential consists of one input and two outputs for the two driving wheels. It allows the wheels to rotate at different speeds to accommodate turns while keeping the average rotational input equal to the drive shaft. Differentials are commonly used in automobiles but also have non-automotive applications like performing analog arithmetic or controlling gun aim. There are different types of differentials like epicyclic, spur gear, and bevel gear differentials.
Locomotion Systems
1. The document discusses different types of locomotion systems for mobile robots, including differential drive, car type drive, and skid steer drive.
2. It also covers actuators that convert electrical energy to mechanical motion, specifically DC motors which can be controlled to run in different directions and speeds.
3. Sensors that provide feedback are also mentioned as an important component for mobile robots.
Mechanisms
This document provides information about mechanisms and how they make life easier. It begins by posing the question "What are Mechanisms & How do they Make Our Lives easier?" and outlines different learning outcomes for understanding mechanisms. It then describes various common mechanisms like levers, linkages, gears, cranks, pulleys, racks and pinions, and chains/sprockets. For each mechanism, examples are given of how it works and products that use it. The document explains that mechanisms allow humans to perform tasks that would otherwise be impossible due to our limited strength, and transmit and change types of motion to make tasks easier.
Gears
This document discusses different types of gears and how they work. It begins by providing examples of how gears are used on bicycles to change speeds for climbing hills or traveling on flat roads. The main points are:
- Gears transmit power from one part of a machine to another and can increase or decrease speed and force.
- The six main types of gears described are spur gears, helical gears, rack and pinion gears, idler gears, worm and wheel gears, and bevel gears.
- Gear trains involve connecting multiple gears together and can be simple, compound, reverted, or epicyclic designs to transfer rotational motion between parallel or intersecting shafts.
Mechanisms - description v3
Mechanisms translate one type of motion into another. They include gears, belts, chains, and other components that transmit motion between parts of a machine. Gears can transmit rotational motion between parallel or perpendicular axles using different arrangements like spur gears, worm gears, and bevel gears. Belts and chains also transmit rotational motion between pulleys or sprockets on different axles. Other mechanisms like cranks, cams, and rack and pinion systems convert between rotational and linear motion.
Gear
Gears are rotating machine parts that transmit torque through their teeth. They produce mechanical advantage through their gear ratios, changing speed and torque. Early gears date back to ancient Greece and China. Gears are used to reverse direction, change speed, transfer motion to different axes, and synchronize rotation between axes. Common gear types include spur, helical, bevel, worm, and planetary gears. Gears have a wide range of applications from transmissions to clocks to mills.
Automatictransmission 180411144519
The document summarizes different types of automatic transmissions. It discusses torque converters, planetary gear sets, and four main types of automatic transmissions: traditional, automated manual, continuously variable, and dual clutch. A torque converter replaces a clutch to change gears hydraulically. Planetary gears provide gear reductions like underdrive and overdrive. Automated manual transmissions automate manual transmissions. Continuously variable transmissions use pulleys to provide infinite gear ratios. Dual clutch transmissions use two clutches to switch between gears more quickly.
Design of two stage planetary gear train for high reduction ratio
Abstract Planetary Gear Trains are extensively used for the power transmission and are the most critical component. Planetary gearboxes are used frequently to match the inertias, lower the motor speed, boost the torque, and at the same time provide a sturdy mechanical interface for pulleys, cams, drums and other mechanical components. This paper presents the advantages of planetary gear systems over other, consideration to be given while determining the reduction ratios of gear box, minimum and maximum reductions per stage of planetary gear pairs. Also the case study to determine the reduction ratio of two stage gear box is discussed. The comparison of planetary gear system over helical gears systems is done on the basis of volume, weight and torque density Keywords: Planetary Gears, Gear train, IS 4460, Torque density.
Automobile Differential Unit
Automobile differential unit explained with the types and general maintenance. Procedure involved in dis-assembly of differential unit is also explained. Then solutions for common problem in differential unit.
Hydraulic Braking System
The document summarizes a presentation on hydraulic braking systems. It discusses key components like the master cylinder, wheel cylinder, brake shoes, brake drum, and brake fluid. The system uses Pascal's law where pressure is equally distributed in all directions through the fluid. Hydraulic braking provides equal braking on all wheels, increased braking force, and flexibility. However, leakage or air in the system can cause whole system failure.
Chainless bicycle ppt presentation
This document describes the design of a shaft-driven bicycle as an alternative to chain-driven bicycles. A shaft-driven bicycle uses a drive shaft connected by spiral bevel gears to transmit power from the pedals to the rear wheel, replacing the chain. The objectives are to increase durability, reduce maintenance costs, improve efficiency, and reduce noise. Calculations are provided for the gearing and shaft design. Advantages include less jamming and protection of clothes, while disadvantages include increased weight. The conclusion is that shaft-driven designs can now match the efficiency of chain-driven bicycles.
Gear
The document discusses different types of gears used for power transmission, including their definitions, components, and applications. It describes spur gears, helical gears, herringbone gears, rack and pinion gears, bevel gears, worm gears, and different types of gear trains. The key points are that gears transmit rotational force from one shaft to another, common types include spur, helical, bevel and worm gears, and gear trains can reduce speed while increasing torque using multiple meshing gears.
Differential mechanism in cars
A homemade differential mechanism made by a team in our college to simplify the function of differentials in cars with low cost and high efficiency.this report is a fast reference to make a good background about this type of mechanisms.
Physics of bicycle
A bicycle is a human-powered vehicle with two wheels attached to a frame. A rider stays upright by steering to keep the point of contact underneath their center of gravity. The position of the center of mass between the rider and bike affects how much the front wheel must move to maintain balance. Bicycles experience internal forces from the rider and between components, and external forces from gravity, air resistance, and ground contact. Motions can be lateral like balancing or longitudinal like rolling forward.
Gear
This document discusses gears, including their types, nomenclature, applications, and gear trains. It describes common gear types like spur gears, helical gears, bevel gears, and worm gears. It defines gear terminology like pitch circle, diametral pitch, and module. It also explains different gear train configurations like simple, compound, and planetary gear trains and their applications.
The Physics of Bicycles
The document discusses the physics behind how bicycles work. It explains that pedaling provides torque that drives the rear wheel forward via the chain and gears. Having multiple gears allows riders to maintain an efficient cadence across different terrains and slopes. The stability of bicycles comes primarily from their trail geometry, where the front wheel contact point trails behind the steering axis. This causes any lean to self-correct, keeping the bicycle upright.
single pedal power grinder
The multipurpose machine that is ‘exercise bicycle’ which was basically used for exercising purpose has been modified for grinding. Source of power utilized for above purpose is pedal power. the process is relatively simple, small parts of the object is small grinder, using electric drive is not conducive to energy saving. according to the above technical solution, the operator holds the part to be machined, sit on the seat cushion, two feet on the foot pedal handle and rotate the handle, the handle foot drive shaft rotates, the first drive shaft on which two sprocket rotation, the second sprocket
Magnetic bearings
Magnetic bearings support a load using magnetic levitation rather than physical contact, reducing friction and wear. They consist of electromagnets, position sensors, and a controller to levitate the rotating shaft. Active magnetic bearings use electromagnets and external power, while passive ones use permanent magnets without external power. Applications include maglev trains, compressors, and artificial hearts due to their ability to operate at high speeds and in vacuums or high temperatures with minimal friction.
What's hot (20)
Design of two stage planetary gear train for high reduction ratio
Design of two stage planetary gear train for high reduction ratio
Viewers also liked
Freshman Engineering Design Reports 1 2 3
The document describes three design briefs for a Rube Goldberg device engineering project. The first brief discusses a wheel-and-axle simple machine that will propel a toy car forward to trigger the next event. The second brief covers an inclined plane and lever simple machine, where a golf ball will roll down the plane and impact the lever. The third brief outlines a pulley simple machine that will raise a flag when hit by a falling domino, and a magnetic force event using magnets to propel the wheel-and-axle. Testing showed all the simple machines and events worked as theoretically expected.
Good example Simple Machines
Simple machines include the pulley, inclined plane, lever, wedge, screw, and wheel and axle. A pulley uses a grooved wheel and rope to move loads, an inclined plane connects different levels with a slanting surface, and a lever lifts loads using a stiff bar resting on a fulcrum. A wedge cuts materials apart with a sharp edge, a screw holds things together or lifts materials using an inclined plane wrapped around a pole, and a wheel and axle lifts loads using a wheel with a central axle.
Unit iii by suman
The document discusses the components and functions of a rear axle system in a vehicle. It describes the rear axle as transmitting torque from the propeller shaft or gearbox to the wheels. The key components it outlines are the rear axle housing, tubes for axle shafts, differential, axle shafts, wheel brakes and suspension connection. It then explains functions like changing rotation direction, providing speed reduction and differential action to allow different wheel speeds when turning.
Best machines power point
Simple machines make work easier and include wheels with axles like bicycles and turbines, levers like see-saws and bottle openers, inclined planes such as wheelchair ramps and stairs, and pulleys that use ropes and wheels to lift things as seen in fishing poles and sailboat sails. These simple machines are tools that appear in everyday life that help make tasks less strenuous.
Levers
This document discusses levers in the body. It defines a lever as a rigid bar that rotates around a fixed point called a fulcrum. There are three types of lever systems - first, second, and third class - which differ based on the relative positions of the fulcrum, load/resistance, and effort. Bones act as levers in the body, with joints as fulcrums and muscles providing effort. A longer lever arm can increase force but decrease range of motion, while a shorter lever arm has the opposite effects. Examples of levers in the body and sports are also provided.
Wheel and Axle
The document discusses the wheel and axle simple machine. It provides examples of a faucet knob and shaft, a car's steering wheel and axles connecting the wheels, and a dolly for moving heavy objects. The wheel and axle works by using a large wheel to easily turn a narrow axle or shaft, transmitting the rotational motion and making difficult tasks simpler to perform.
Viewers also liked (6)
Recently uploaded
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsA tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Wheel and axle
- 3. The wheel and axle is one of six simple machines identified by Renaissance scientists drawing from Greek texts on technology.
- 4. OK
- 5. In this simple machines, a wheel is locked to a central axle and they rotate each other when a force is applied on either one them .
- 6. A wheel and axle provides MechanicalAdvantage (MA). The advantage is a ratio of resistance to the effort.
- 7. This consists of the axle (rod) . This so ,that their movements are coupled when one of the parts is turned.
- 8. Two types of Wheel and axle Force multiplier Distance multiplier
- 9. Types of Wheel and Axle Door Knob
- 10. Wheel Barrow
- 11. Wagon
- 12. The End