This document provides an overview of policing and crime prevention strategies, with a focus on the role of community involvement. It discusses the history of considering crime prevention an important police function dating back to Sir Robert Peel. National commissions in the US brought attention to the importance of community crime prevention programs in the 1970s. Techniques discussed include defensible space, crime prevention through environmental design, and situational crime prevention. The document also discusses how community crime prevention fits with the concept of community policing.
Body Paragraphs OutlineIntroduction Auto-pilot cars also refer.docxmoirarandell
Body Paragraphs Outline
Introduction: “Auto-pilot cars also referred to as driverless cars are vehicles that are capable of moving with no human involvement or little input by sensing the environment.” These cars combine several sensors that perceive the surrounding such as GPS, radar, Odometer, and computer vision. Their advanced control systems then interpret the sensory data to recognize the appropriate navigation path.
Thesis: “Auto-pilot cars have various benefits to human, environment, and economy.”
Body Paragraph #1:
Topic sentence: Self-drive cars increase safety.
The safety benefits that are anticipated from these cars include reducing the number of traffic collisions that results in injuries and additional costs. Besides, these cars will provide increased traffic flow to avoid rush among motorists that have always resulted in accidents.
Body Paragraph #2:
Topic sentence: Self-drive cars increase mobility for the children, disabled, and the elderly. Majorly, the automated driving feature is critical for assisting people with special needs during driving to travel and navigate without barriers. These cars thus are helpful for these groups of people as they will just sit and reach their destinations.
Body Paragraph #3:
Topic sentence: Auto-pilot cars reduce costs.
These cars adequately reduce the need of parking space and fees, reduce crime rates, and increases fuel efficiency. Besides, they reduce costs through reducing insurance rates since they are usually accident free and do not necessitate insurance.
Body Paragraph #4:
Topic sentence: Self-drive vehicles are fast and have little breakdown time.
Since they are automated, these cars identify and inform the owners on the potential mechanical issues and suggest potential solution. Therefore, the user can fix the problem without having to manually identify and correct the problem.
Conclusion:
In summary, auto-pilot cars are beneficial in many aspects. They increase mobility rates among humans as well as safety. Besides, they reduce costs and have little mechanical breakdown concerns.
1 Sexual Offenses and Offenders
There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there .
1 Sexual Offenses and Offenders There are few groups of individual.docxjeremylockett77
1 Sexual Offenses and Offenders There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there is no sign of reducing the sanctions for this group. This is not the first time historically that society has exhibited a “moral panic” about the dangers of sexual abuse. This panic has waned and ebbed throughout the last century. Jenkins (1998, p. 4) explains that the perception of sex offenders is the effect of “socially constructed realities” influenced by existing social and political ideologies. The public desire to incapacitate sex offenders today is similar to social attitudes in the 1930s, when sexual psychopathy laws emerged to incapacitate those considered to be “unfortunate but dangerous wretches” (Robson, 1999, p. 2). So although empirical research has consistently shown that sex offenders constitute a heterogeneous population of individuals for whom a one-size-fits-all policy will not be effective, such policies regarding the supervision, monitoring, and incapacitation of sexual offenders have gone full circle since the beginning of the century. The purpose of this text is to provide the reader with a general understanding of sex offenders and the societal responses to them. Historically, sex offender research has focused on why sex offenders commit such offenses, and the characteristics of different types of offenders. Sex offender research today is centered around three general topic areas: (1) the factors associated with sexual offending, including personal characteristics as well as situational variables; (2) sex offenders' risk of recidivism; and (3) the efficacy of policies and programs for sex offenders. Before addressing the issue of why people commit sexual offenses and how best to prevent them, however, it is necessary to understand the nature and scope of sex crimes in the United States today. WHAT IS A SEXUAL OFFENSE? More than 100 years ago, Richard von Krafft-Ebing (1886/1965, p. 241) made the following observation about sexual behavior: Nothing is so prone to contaminate—under certain circumstances, even to exhaust—the source of all noble and ideal sentiments, which arise from a normally developed sexual instinct, as the p ...
1 Sexual Offenses and OffendersThere are few groups of indiv.docxvickeryr87
1 Sexual Offenses and Offenders
There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there is no sign of reducing the sanctions for this group.
This is not the first time historically that society has exhibited a “moral panic” about the dangers of sexual abuse. This panic has waned and ebbed throughout the last century. Jenkins (1998, p. 4) explains that the perception of sex offenders is the effect of “socially constructed realities” influenced by existing social and political ideologies. The public desire to incapacitate sex offenders today is similar to social attitudes in the 1930s, when sexual psychopathy laws emerged to incapacitate those considered to be “unfortunate but dangerous wretches” (Robson, 1999, p. 2). So although empirical research has consistently shown that sex offenders constitute a heterogeneous population of individuals for whom a one-size-fits-all policy will not be effective, such policies regarding the supervision, monitoring, and incapacitation of sexual offenders have gone full circle since the beginning of the century.
The purpose of this text is to provide the reader with a general understanding of sex offenders and the societal responses to them. Historically, sex offender research has focused on why sex offenders commit such offenses, and the characteristics of different types of offenders. Sex offender research today is centered around three general topic areas: (1) the factors associated with sexual offending, including personal characteristics as well as situational variables; (2) sex offenders' risk of recidivism; and (3) the efficacy of policies and programs for sex offenders. Before addressing the issue of why people commit sexual offenses and how best to prevent them, however, it is necessary to understand the nature and scope of sex crimes in the United States today.
WHAT IS A SEXUAL OFFENSE?
More than 100 years ago, Richard von Krafft-Ebing (1886/1965, p. 241) made the following observation about sexual behavior:
· Nothing is so prone to contaminate—under certain circumstances, even to exhaust—the source of all noble and ideal sentiments, which arise from a normally developed sexual instinct, as the.
1 Network Analysis and Design This assignment is.docxoswald1horne84988
1
Network Analysis and Design
This assignment is worth 30%.
Deadline: Mon, Week 12
Part A: HQ LAN Upgrade (35%)
Background:
ABC is a big company in the US. ABC has employed you as the IT officer of the company.
Your job is to analyse the performance of the HQ LAN, suggest changes to improve the
network performance and provide a report to your boss.
Settings:
Run all simulations for 30 minutes to simulate a working day.
The graphs should be time averaged
Duplicate scenario for each possible setup
Tasks:
1. Analyse the current performance of the HQ LAN for each level and comment on it.
You are required to show all relevant graphs. The graphs for each level can be
overlaid. (10%)
2. Some staffs are unhappy about the speed of the network. Anything that takes more
than 1 second is not desirable. You have decided to try the following to improve the
network performance. Show the relevant graphs and comment on the results: (5%)
a. Increase the link speeds of
i. HQ_Router1 to HQ_Router3 from 1 Gbps to 10 Gbps and
ii. HQ_Router2 to HQ_Router3 from 1 Gbps to 10 Gbps
b. Increase the LANs for level 1, 2 and 3 from 100 Mbps to 1 Gbps
c. Try out 1 other way that meets the requirement.
3. After meeting the requirement, the company has decided to purchase an Ethernet
Server and placed it in the HQ LAN. (10%)
a. Rename it to HQ Server
b. Use a 1Gbps link
c. Set Application: Supported Services to All
d. Set statistics to view the following:
i. Server DB Task Processing Time (Heavy)
ii. Server Email Task Processing Time (Heavy)
iii. Server HTTP Task Processing Time (Heavy)
iv. Server Performance Task Processing Time
e. Show the performance of the HQ Server with the required graphs and
comment on the results
f. Justify the location of the server
g. State at least 3 security measures you will take to protect the HQ LAN from
malicious attacks
4. What would you do so that all the 4 statistics of the HQ server are less than 0.025 s?
Show all relevant graphs. (3 marks)
2
5. Prepare a report and state the additional amount of money that is needed for the
changes you have made to meet the additional requirements. Refer to the given price
list in the Appendix. (7%)
a. Your report should include a content page, a summary of the addressed issues,
objectives, budgeting, proposed solutions and conclusion.
Part B: Network Design (65%)
Background:
Due to your excellent work in the analysis of the HQ LAN, you are now assigned the new
task of designing the LAN for one of ABC’s client, XYZ. The company XYZ is made up of 4
sections and the number of people in each section is as shown below.
1. Research – 20
2. Technical – 10
3. Guests – 4
4. Executives – 2
Set up the following staff profile:
1. Research: file transfer (light), web browsing (heavy) and file print (light)
2. Technical: Database Access (heavy), telnet (heavy) and email (light)
3. Guests: Em.
Body Paragraphs OutlineIntroduction Auto-pilot cars also refer.docxmoirarandell
Body Paragraphs Outline
Introduction: “Auto-pilot cars also referred to as driverless cars are vehicles that are capable of moving with no human involvement or little input by sensing the environment.” These cars combine several sensors that perceive the surrounding such as GPS, radar, Odometer, and computer vision. Their advanced control systems then interpret the sensory data to recognize the appropriate navigation path.
Thesis: “Auto-pilot cars have various benefits to human, environment, and economy.”
Body Paragraph #1:
Topic sentence: Self-drive cars increase safety.
The safety benefits that are anticipated from these cars include reducing the number of traffic collisions that results in injuries and additional costs. Besides, these cars will provide increased traffic flow to avoid rush among motorists that have always resulted in accidents.
Body Paragraph #2:
Topic sentence: Self-drive cars increase mobility for the children, disabled, and the elderly. Majorly, the automated driving feature is critical for assisting people with special needs during driving to travel and navigate without barriers. These cars thus are helpful for these groups of people as they will just sit and reach their destinations.
Body Paragraph #3:
Topic sentence: Auto-pilot cars reduce costs.
These cars adequately reduce the need of parking space and fees, reduce crime rates, and increases fuel efficiency. Besides, they reduce costs through reducing insurance rates since they are usually accident free and do not necessitate insurance.
Body Paragraph #4:
Topic sentence: Self-drive vehicles are fast and have little breakdown time.
Since they are automated, these cars identify and inform the owners on the potential mechanical issues and suggest potential solution. Therefore, the user can fix the problem without having to manually identify and correct the problem.
Conclusion:
In summary, auto-pilot cars are beneficial in many aspects. They increase mobility rates among humans as well as safety. Besides, they reduce costs and have little mechanical breakdown concerns.
1 Sexual Offenses and Offenders
There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there .
1 Sexual Offenses and Offenders There are few groups of individual.docxjeremylockett77
1 Sexual Offenses and Offenders There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there is no sign of reducing the sanctions for this group. This is not the first time historically that society has exhibited a “moral panic” about the dangers of sexual abuse. This panic has waned and ebbed throughout the last century. Jenkins (1998, p. 4) explains that the perception of sex offenders is the effect of “socially constructed realities” influenced by existing social and political ideologies. The public desire to incapacitate sex offenders today is similar to social attitudes in the 1930s, when sexual psychopathy laws emerged to incapacitate those considered to be “unfortunate but dangerous wretches” (Robson, 1999, p. 2). So although empirical research has consistently shown that sex offenders constitute a heterogeneous population of individuals for whom a one-size-fits-all policy will not be effective, such policies regarding the supervision, monitoring, and incapacitation of sexual offenders have gone full circle since the beginning of the century. The purpose of this text is to provide the reader with a general understanding of sex offenders and the societal responses to them. Historically, sex offender research has focused on why sex offenders commit such offenses, and the characteristics of different types of offenders. Sex offender research today is centered around three general topic areas: (1) the factors associated with sexual offending, including personal characteristics as well as situational variables; (2) sex offenders' risk of recidivism; and (3) the efficacy of policies and programs for sex offenders. Before addressing the issue of why people commit sexual offenses and how best to prevent them, however, it is necessary to understand the nature and scope of sex crimes in the United States today. WHAT IS A SEXUAL OFFENSE? More than 100 years ago, Richard von Krafft-Ebing (1886/1965, p. 241) made the following observation about sexual behavior: Nothing is so prone to contaminate—under certain circumstances, even to exhaust—the source of all noble and ideal sentiments, which arise from a normally developed sexual instinct, as the p ...
1 Sexual Offenses and OffendersThere are few groups of indiv.docxvickeryr87
1 Sexual Offenses and Offenders
There are few groups of individuals who are more reviled than sexual offenders. Though this has been true for more than a century, the past two decades have brought forth intense scrutiny from the public, politicians, and policymakers. Several emotionally-charged cases of child sexual abuse were highly publicized in the 1980s and 1990s, reigniting public intolerance for sexual offenders. And although the incidence of sexual offenses has been decreasing, sanctions for sex offenders have been constantly increasing over the last two decades. Unfortunately, empirical research does not show that such sanctions significantly deter offenders or reduce recidivism, and yet this legislation creates significant financial strain for local jurisdictions and states that must implement the policies (Zgoba et al., 2008). Despite the questionable efficacy of these laws, there is no sign of reducing the sanctions for this group.
This is not the first time historically that society has exhibited a “moral panic” about the dangers of sexual abuse. This panic has waned and ebbed throughout the last century. Jenkins (1998, p. 4) explains that the perception of sex offenders is the effect of “socially constructed realities” influenced by existing social and political ideologies. The public desire to incapacitate sex offenders today is similar to social attitudes in the 1930s, when sexual psychopathy laws emerged to incapacitate those considered to be “unfortunate but dangerous wretches” (Robson, 1999, p. 2). So although empirical research has consistently shown that sex offenders constitute a heterogeneous population of individuals for whom a one-size-fits-all policy will not be effective, such policies regarding the supervision, monitoring, and incapacitation of sexual offenders have gone full circle since the beginning of the century.
The purpose of this text is to provide the reader with a general understanding of sex offenders and the societal responses to them. Historically, sex offender research has focused on why sex offenders commit such offenses, and the characteristics of different types of offenders. Sex offender research today is centered around three general topic areas: (1) the factors associated with sexual offending, including personal characteristics as well as situational variables; (2) sex offenders' risk of recidivism; and (3) the efficacy of policies and programs for sex offenders. Before addressing the issue of why people commit sexual offenses and how best to prevent them, however, it is necessary to understand the nature and scope of sex crimes in the United States today.
WHAT IS A SEXUAL OFFENSE?
More than 100 years ago, Richard von Krafft-Ebing (1886/1965, p. 241) made the following observation about sexual behavior:
· Nothing is so prone to contaminate—under certain circumstances, even to exhaust—the source of all noble and ideal sentiments, which arise from a normally developed sexual instinct, as the.
1 Network Analysis and Design This assignment is.docxoswald1horne84988
1
Network Analysis and Design
This assignment is worth 30%.
Deadline: Mon, Week 12
Part A: HQ LAN Upgrade (35%)
Background:
ABC is a big company in the US. ABC has employed you as the IT officer of the company.
Your job is to analyse the performance of the HQ LAN, suggest changes to improve the
network performance and provide a report to your boss.
Settings:
Run all simulations for 30 minutes to simulate a working day.
The graphs should be time averaged
Duplicate scenario for each possible setup
Tasks:
1. Analyse the current performance of the HQ LAN for each level and comment on it.
You are required to show all relevant graphs. The graphs for each level can be
overlaid. (10%)
2. Some staffs are unhappy about the speed of the network. Anything that takes more
than 1 second is not desirable. You have decided to try the following to improve the
network performance. Show the relevant graphs and comment on the results: (5%)
a. Increase the link speeds of
i. HQ_Router1 to HQ_Router3 from 1 Gbps to 10 Gbps and
ii. HQ_Router2 to HQ_Router3 from 1 Gbps to 10 Gbps
b. Increase the LANs for level 1, 2 and 3 from 100 Mbps to 1 Gbps
c. Try out 1 other way that meets the requirement.
3. After meeting the requirement, the company has decided to purchase an Ethernet
Server and placed it in the HQ LAN. (10%)
a. Rename it to HQ Server
b. Use a 1Gbps link
c. Set Application: Supported Services to All
d. Set statistics to view the following:
i. Server DB Task Processing Time (Heavy)
ii. Server Email Task Processing Time (Heavy)
iii. Server HTTP Task Processing Time (Heavy)
iv. Server Performance Task Processing Time
e. Show the performance of the HQ Server with the required graphs and
comment on the results
f. Justify the location of the server
g. State at least 3 security measures you will take to protect the HQ LAN from
malicious attacks
4. What would you do so that all the 4 statistics of the HQ server are less than 0.025 s?
Show all relevant graphs. (3 marks)
2
5. Prepare a report and state the additional amount of money that is needed for the
changes you have made to meet the additional requirements. Refer to the given price
list in the Appendix. (7%)
a. Your report should include a content page, a summary of the addressed issues,
objectives, budgeting, proposed solutions and conclusion.
Part B: Network Design (65%)
Background:
Due to your excellent work in the analysis of the HQ LAN, you are now assigned the new
task of designing the LAN for one of ABC’s client, XYZ. The company XYZ is made up of 4
sections and the number of people in each section is as shown below.
1. Research – 20
2. Technical – 10
3. Guests – 4
4. Executives – 2
Set up the following staff profile:
1. Research: file transfer (light), web browsing (heavy) and file print (light)
2. Technical: Database Access (heavy), telnet (heavy) and email (light)
3. Guests: Em.
1 Name _____________________________ MTH129 Fall .docxoswald1horne84988
1
Name: _____________________________
MTH129 Fall 2018 - FINAL EXAM A
Show all work neatly on paper provided. Label all work. Place final answers on the answer sheet.
PART I: Omit 1 complete question. Place an “X” on the problems & answer space you are omitting.
1. Find the inverse of the following functions:
a. 𝑓(𝑥) = 2𝑥 − 3
b. 𝑓(𝑥) =
3𝑥 +1
𝑥−2
2. If 𝑓(𝑥) = 𝑥 2 − 2𝑥 + 3 and 𝑔(𝑥) = −3𝑥 + 4, find the following:
a. (𝑓°𝑔)(𝑥) b. (𝑓°𝑔)(2)
3. Find the domain for the following expression:
a) √𝑥 + 5 𝑏) 7𝑥 2 + 3𝑥 − 1 𝑐)
𝑥 2+4
𝑥 2−9
4. Find the radian measures of the angles with the given degree measures.
a) 81°
Find the degree measures of the angles with the given radian measures.
b)
13𝜋
6
5. Solve the following equations:
a) (5t) = 20
b) 6000 = 40(15)t
6. Expand the following logarithmic expressions:
a. log(𝐴𝐵2 )
b. ln(
4
√3
)
7. Describe how the graph of each function can be obtained from the graph f
a. 𝑦 = 𝑓(𝑥) − 8
b. 𝑦 = 𝑓(𝑥 + 4) − 5
8. A real number t is given 𝑡 =
2𝜋
3
a. Find the reference number for t.
b. Find the terminal point P(x,y) on the unit circle determined by t
c. The unit circle is centered at __________________ and has a radius of _________________
PART II: Omit 1 complete question. Place an “X” on the problems & answer space you are omitting.
2
1. A sum of $7,000 is invested at an interest rate of 4
1
2
% per year, compounding monthly. (round all answers to
the nearest cent)
a. Find the amount of the investment after 2
1
2
years.
b. How long will it take for the investment to amount to $12,000?
c. Using the information in part (a), find the amount of the investment if compounded quarterly.
2. When a company charges price p dollars for one of its products, its revenue is given by
𝑅 = 𝑓(𝑝) = 500𝑝(30 − 𝑝)
a. Create a quadratic function for price with respect to revenue.
b. What price should they charge in order to maximize their revenue?
c. What is the maximum revenue?
d. What would be the revenue if the price was set at $10?
e. Sketch a rough graph – indicate the intercepts and the maximum coordinates.
3. The charges for a taxi ride are an initial charge of $2.50 and $0.85 for each mile driven.
a. Write a function for the charge of a taxi ride as a linear function of the distance traveled.
b. What is the cost of a 12 mile trip?
c. Find the equation of a line that passes through the following points: (1,-2) , (2,5) Express in 𝑦 =
𝑚𝑥 + 𝑏 form
d. Graph part ( c )
4. a. Divide the following polynomial and factor completely.
𝑃(𝑥) = 3𝑥 4 − 9𝑥 3 − 2𝑥 2 + 5𝑥 + 3; 𝑐 = 3
b. Given polynomial−𝑥 2 + 5𝑥 − 6, state the end behavior of its graph.
c. Using the polynomial on part ( c ), would this g
1 Lab 8 -Ballistic Pendulum Since you will be desig.docxoswald1horne84988
1
Lab 8 -Ballistic Pendulum
Since you will be designing your own procedure you will have two
class periods to take the required data.
The goal of this lab is to measure the speed of a ball that is fired
from a projectile launcher using two different methods. The
Projectile launcher has three different settings, “Short Range,”
“Medium Range” and “Long Range,” however you will only need to
determine the speed for any ONE of these Range settings.
Method 1 involves firing the ball directly into the “Ballistic
Pendulum” shown below in Figure 2 for which limited instructions will be provided. Method 2
is entirely up to your group. While you have significant freedom to design your own procedure,
you will need to worry about the random and systematic uncertainties you are introducing
based on your procedure. This manual will provide a few hints to help reduce a few of those
uncertainties.
The ballistic pendulum pictured in Figure 2 is important canonical problem students study to
explore the conservation of momentum and energy. The ball is fired by the projectile launcher
into a “perfectly inelastic collision” with the pendulum. The pendulum then swings to some
maximum angle which is measured by an Angle Indicator.
Caution: The pendulum has a plastic hinge and Angle Indicator which are both fragile. Be
gentle.
Study the ballistic pendulum carefully. Before we begin, here are a few things to consider and
be aware of in Figure 2:
Projectile launcher
Angle indicator (curved
black bar)
Clamp
Pendulum (can be removed
for measurements)
Figure 2: Ballistic Pendulum
Plumb bob
Firing string
Release
point
Figure 1: Projectile Launcher
Bolt for removing pendulum
2
A. Clamping the ballistic pendulum to the table will reduce random uncertainties in the
speed with which the projectile launcher releases the ball. Similarly, you should check
that the various bolts are snug and that the ball is always fully inside the launcher (not
rolling around inside the barrel of launcher).
B. If the lab bench is not perfectly horizontal the plumb bob and angle indicator will not
read zero degrees before you begin your experiment. You should fix AND/OR account
for these discrepancies.
C. In Figure 3 you will notice a tiny gap between the launcher and the pendulum. This
important gap prevents the launcher from contacting the pendulum directly as the ball
is fired. Without this gap an unknown amount of momentum is transferred from the
launcher directly to the pendulum (in addition to the momentum transferred by the
ball) significantly complicating our experiment.
Figure 3: Important gap between Launcher and Pendulum
Equipment
1 Ballistic Pendulum (shown in Figure 2)
A bag with three balls
1 loading rod
1 Clamp
1 triple beam balance scale
Safety goggles for each group member
Any equipment found in your equipment drawer.
Reasonable equipment reque.
1 I Samuel 8-10 Israel Asks for a King 8 When S.docxoswald1horne84988
1
I Samuel 8-10
Israel Asks for a King
8 When Samuel grew old, he appointed his sons as Israel’s leaders.[a]2 The
name of his firstborn was Joel and the name of his second was Abijah, and
they served at Beersheba. 3 But his sons did not follow his ways. They turned
aside after dishonest gain and accepted bribes and perverted justice.
4 So all the elders of Israel gathered together and came to Samuel at
Ramah. 5 They said to him, “You are old, and your sons do not follow your
ways; now appoint a king to lead[b] us, such as all the other nationshave.”
6 But when they said, “Give us a king to lead us,” this displeasedSamuel; so
he prayed to the LORD. 7 And the LORD told him: “Listen to all that the people
are saying to you; it is not you they have rejected, but they have rejected
me as their king. 8 As they have done from the day I brought them up out of
Egypt until this day, forsaking me and serving other gods, so they are doing
to you. 9 Now listen to them; but warn them solemnly and let them
know what the king who will reign over them will claim as his rights.”
10 Samuel told all the words of the LORD to the people who were asking him
for a king. 11 He said, “This is what the king who will reign over you will claim
as his rights: He will take your sons and make them serve with his chariots
and horses, and they will run in front of his chariots. 12 Some he will assign to
be commanders of thousands and commanders of fifties, and others to plow
his ground and reap his harvest, and still others to make weapons of war
and equipment for his chariots. 13 He will take your daughters to be
perfumers and cooks and bakers. 14 He will take the best of your fields and
vineyards and olive groves and give them to his attendants. 15 He will take a
tenth of your grain and of your vintage and give it to his officials and
attendants. 16 Your male and female servants and the best of your cattle[c] and
donkeys he will take for his own use. 17 He will take a tenth of your flocks,
and you yourselves will become his slaves. 18 When that day comes, you will
cry out for relief from the king you have chosen, but the LORD will not
answer you in that day.”
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7371a
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7375b
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7386c
2
19 But the people refused to listen to Samuel. “No!” they said. “We wanta
king over us. 20 Then we will be like all the other nations, with a king to lead
us and to go out before us and fight our battles.”
21 When Samuel heard all that the people said, he repeated it before
the LORD. 22 The LORD answered, “Listen to them and give them a king.”
Then Samuel said to the Israelites, “Everyone go back to your own town.”
Samuel Anoints Saul
9 There was a Benjamite, a man of standing, whose n.
1 Journal Entry #9 What principle did you select .docxoswald1horne84988
1
Journal Entry #9
What principle did you select?
I selected principle 1 of part 1, “Don’t criticize, condemn or complain”.
Who did you interact with?
For this assignment I interacted with my younger cousin.
What was the context?
I had visited my Aunty and she and her husband asked me to stay a while as I was on school
break. They accommodated me and I decided in return to help look after my cousin in the period
when he got out of school and before they got back from work. He is 5 years old and can be quite
the handful.
What did you expect?
I expected that an authoritative approach would easily compel him to follow my instructions so
that the transition from school life into home life would be easy.
What happened?
At first, I used commanding language to get him to change out of his uniform or properly store
his back pack and books before stepping out to play. The first day was difficult and the way I
deal with him were not getting through. On the 2nd day, the same was observed. On the 3rd day,
before he could drop his back pack and run out, I offered to make him a sandwich to eat before
he left to play if he would change and clean up. He rushed up stairs and freshened up. On the
next day, he came home and rushed up to change and freshen up all on his own. I had not
initially offered; but I made him a sandwich regardless.
How did it make you feel?
It made me feel good to be able to get through to my cousin. After this, if I ever needed him to
do something in a better way than previously, I would encourage him onto a different way of
accomplishing the same. I would often offer praise after adoption of the new suggested method
was adopted or offered incentive.
2
What did you learn?
I learnt that in criticizing a person’s action, it is difficult to deter their belief in their methods,
values or beliefs. This usually just gives them the will to justify or defend their positions. It is
almost an exercise in futility to attempt to effect change by complaining, condemning or
criticizing.
What surprised you?
I was surprised by how fast the change was effected after the shift in direction I took to approach
my cousin. In not criticizing his way of doing things any longer and employing a different tactic,
I was able to influence his routine as well as build good rapport with him.
Going forward, how can you apply what you learnt?
Going forward I will attempt to understand that everyone has a belief or image of their own that I
should respect. These beliefs, systems and values are crucial to their inherent dignity and to
criticize or attack this will only fuel conflict.
Running head: Physical activity project 1
Physical activity project:
A 7-day analysis and action plans
Student Name
National University
Physical activity project 2
Introduction
Physical activity (PA) has been a major component of public health since the rise of
chronic illnesses .
1
HCA 448 Case 2 for 10/04/2018
Recently, a patient was transferred to a cardiac intensive care unit (CICU) at Methodist Hospital.
Methodist is a 250-bed hospital, which is one of five hospitals in the University Health System.
The patient was a retired 72-year-old man, who recently (i.e., 25 days ago) had a mild heart
attack and was treated and released from a sister hospital, which is in the same system as
Methodist Hospital. An otherwise health individual, Mr. Charlie Johnson (a husband, father of 4,
and grandfather of 12) is in now need or lots of medication and a battery of tests. To the nurses
on shift, it appears that the entire Johnson family is in patient’s room watching the clinical staff
treated Mr. Johnson. The family overhears everything and they want to know what is being done
to (and for) their loved one. In addition, they want to know the meaning behind the various beeps
coming from the many machines attached to Mr. Johnson.
Over the past 10 years, the latest U.S. News and World report has ranked Methodist Hospital as
one of the Best Hospitals for Cardiology & Heart Surgery. However, it is important to note that
over the past few years, the unit has dropped in the rankings.
Katherine Ross RN, the patient care director of the CICU, which has 14 beds, has held this post
for two years. (See Figure) The unit has a $20 million budget. Ms. Ross has worked at Methodist
Hospital for 16 years. She spends 50 percent of her time on patient safety, 25 percent on staffing
and recruitment, and 20 percent with nurses in relation to their satisfaction with the work and
with families relative to their satisfaction with care. Ten percent of Ms. Ross’s time is spent on
administrative duties. According to Ms. Ross, “I like is working with exceptional nurses who are
very smart and do what it takes with limited resources. However, we don’t always feel
empowered, despite the existence of shared governance, a structure I help to coordinate.”
2
Relationship with Nurses on the Unit:
Nurses on the unit work a three day a week, 12 hours a shift. Ms. Ross says, “we did an
employee opinion survey that went to all employees on the unit, 50 people in all, but only 13
responded. Some of them weren’t sure who their supervisor was. The employees aren’t happy
but our patients are happy.” She adds that “my name is on the unit, not the medical director’s. If
anything goes wrong with the unit, they blame it on nursing. Yet I’m brushed off by people
whom I have to deal with outside of the unit. For example, we have a problem with machines
that analyze blood gases. I spoke with the people there about the technology. This was four
weeks ago. It’s a patient safety issue. I sent them e-mails. I need the work to get done, the staff
don’t feel empowered if I’m not empowered. This goes for other departments as well. For
example, respiratory therapy starts using a new ventilator witho.
1
HC2091: Finance for Business
Trimester 2 2018
Group Assignment
Assessment Value: 20%
Due Date: Sunday 23:59 pm, Week 10
Group: 2- 4 students
Length: Min 2500 words
INSTRUCTIONS
Students are required to form a group to study, undertake research, analyse and conduct academic
work within the areas of business finance covered in learning materials Topics 1 to 10 inclusive.
The assignment should examine the main issues, including underlying theories, implement
performance measures used and explain the firm financial performance. Your group is strongly
advised to reference professional websites, journal articles and text books in this assignment (case
study).
Tasks
This assessment task is a written report and analysis of the financial performance of a selected
listed company on the ASX in order to provide financial and investment advice to a wealthy
investor. This assignment requires your group to undertake a comprehensive examination of a
firm’s financial performance based on update financial statements of the chosen companies.
Group Arrangement
This assignment must be completed IN Group. Each group can be from 2 to maximum 4 student
members. Each group will choose 1 company and once the company has been chosen, the other
group cannot choose the same company. First come first served rule applies here, it means you
need to form your group, choose on company from the list of ASX and register them with your
lecturer as soon as possible. Once your lecturer registers your chosen company, it cannot be
chosen by any other group. Your lecturer then will put your group on Black Board to enable you
to interact and discuss on the issues of your group assignment using Black Board environment.
However, face to face meeting, discussion and other methods of communication are needed to
ensure quality of group work. Each group needs to have your own arrangement so that all the
group members will contribute equally in the group work. If not, a Contribution Statement,
which clearly indicated individual contribution (in terms of percentage) of each member, should
be submitted as a separate item in your assignment. Your individual contribution then will be
assessed based on contribution statement to avoid any free riders.
2
Submission
Please make sure that your group member’s name and surname, student ID, subject name, and
code and lecture’s name are written on the cover sheet of the submitted assignment.
When you submit your assignment electronically, please save the file as ‘Group Assignment-
your group name .doc’. You are required to submit the assignment at Group Assignment
Final Submission, which is under Group Assignment and Due Dates on Black Board.
Submitted work should be your original work showing your creativity. Please ensure the self-
check for plagiarism to be done before final submission (plagiarism check is not over 30% .
1 ECE 175 Computer Programming for Engineering Applica.docxoswald1horne84988
1
ECE 175: Computer Programming for Engineering Applications
Homework Assignment 6
Due: Tuesday March 12, 2019 by 11.59 pm
Conventions: Name your C programs as hwxpy.c where x corresponds to the homework number and y
corresponds to the problem number. For example, the C program for homework 6, problem 1 should be
named as hw6p1.c.
Write comments to your programs. Programs with no comments will receive PARTIAL credit. For each
program that you turn in, at least the following information should be included at the top of the C file:
- Author and Date created
- Brief description of the program:
- input(s) and output(s)
- brief description or relationship between inputs and outputs
Submission Instructions: Use the designated Dropbox on D2L to submit your homework.
Submit only the .c files.
Problem 1 (15 points) Write a program that returns the minimum value and its location, max
value and its location and average value of an array of integers. Your program should call a
single function that returns that min and its location, max and its location and mean value of
the array. Print the results in the main function (not within the array_func function).
See sample code execution below. The declaration of this function is given below:
void array_func (int *x, int size, int *min_p, int *minloc_p, int *max_p, int *maxloc_p, double *mean_p)
/* x is a pointer to the first array element
size is the array size
min_p is a pointer to a variable min in the main function that holds the minimum
minloc_p is a pointer to a variable minloc in the main function that holds the location where the
minimum is.
max_p is a pointer to a variable max in the main function that holds the maximum
maxloc_p is a pointer to a variable maxloc in the main function that holds the location where the
maximum is.
mean_p is a pointer to a variable mean in the main function that holds the mean */
Declare the following array of integers within the main function:
Sample code execution:
int data_ar[] = { -3, 5, 6, 7, 12, 3, 4, 6, 19, 23, 100, 3, 4, -2, 9, 43, 32, 45,
32, 2, 3, 2, -1, 8 };
int data_ar2[] = { -679,-758,-744,-393,-656,-172,-707,-32,-277,-47,-98,-824,-695,
-318,-951,-35,-439,-382,-766,-796,-187,-490,-446,-647};
int data_ar3[] = {-142, -2, -56, -60, 114, -249, 45, -139, -25, 17, 75, -27, 158,
-48, 33, 67, 9, 89, 33, -78, -180, 186, 218, -274};
2
Problem 2 (20 points): A barcode scanner verifies the 12-digit code scanned by comparing the
code’s last digit to its own computation of the check digit calculated from the first 11 digits as
follows:
1. Calculate the sum of the digits in the odd-numbered indices (the first, third, …, ninth
digits) and multiply this sum by 3.
2. Calculate the sum of the digits in the even-numbered indices (the 0th, second, … tenth
digits).
3. Add the results from step 1 and 2. If the last digit of the addition result is 0, then 0 is the
check digit. .
1 Cinemark Holdings Inc. Simulated ERM Program .docxoswald1horne84988
1
Cinemark Holdings Inc.: Simulated ERM Program
Ben Li, Assistant Vice President of Compliance, is assigned the responsibility of developing an ERM
program at Cinemark Holdings Inc. (CHI). Over the past year, Ben has put in place the following ERM
activities:
Risk Identification and Assessment
The risk identification and assessment process steps are as follows:
1) Conduct online surveys of the heads of the 10 business segments and their 1-2 direct reports (15
people) and their mid-level managers (80 people). Exhibit 1 shows the instructions that are
included in the online survey. Exhibit 2 shows samples of the information collected from the
online survey.
2) Each of the 10 business segments separately organizes and compiles the results of the online
survey. They typically compile a robust list of 70-80 potential key risks. Each business segment
then prioritizes their top-5 risks and reports them to Ben Li, resulting in a total of 50 key risks (a
partial sample of the top-50 risk list is shown in Exhibit 3).
3) A consensus meeting is conducted where the 50 risks are shared with the top 10 members of
senior management in an open-group setting at an offsite one-day event. The 50 risks are each
discussed one at a time, after which the facilitator has the group collectively discuss and score
them for likelihood and severity. The risk ranking is calculated as the likelihood score plus the
severity score; the control effectiveness score is used to determine if there is room to improve
the controls and is used in the risk decision making process step. The top-20 risks are identified
as the key risks to CHI and are selected for additional mitigation and advanced to the risk
decision making stage. A Heat Map (see Exhibit 4) is provided to assist in this effort.
4) The 30 risks remaining from the 50 discussed at the consensus meeting are considered the non-
key risks, and these are monitored with key risk indicators to see if, over time, either the
likelihood and/or severity is increasing to the level which would result in one of these being
elevated to a key risk.
Risk Decision Making
Ben Li formed a Risk Committee to look at the risk identification and assessment information and to
define CHI’s risk appetite and risk limits, which were defined as follows:
Risk Appetite
CHI will maintain its overall risk profile in a manner consistent with our mission and vision and with the
expectations of our shareholders.
Risk Limits
CHI will also avoid any individual risk exposures deemed excessive by its Risk Committee; the individual
risk exposures will be determined separately for each key risk. CHI has zero tolerance for risks related to
internal fraud or violations of the employee code of conduct.
2
Ben Li expanded the role of the Risk Committee to also select and implement the risk mitigation for each
of the 20 key risks, at the same time as the committee determines the risk limits. .
1 Figure 1 Picture of Richard Selzer Richard Selz.docxoswald1horne84988
1
Figure 1 Picture of Richard Selzer
Richard Selzer
What I Saw at the Abortion
I am a surgeon. Sick flesh is everyday news. Escaping blood, all the outpourings of
disease, meaty tumors that terrify–I touch these to destroy them. But I do not make symbols of
them.
What I am saying is that I have seen and I am used to seeing. I am a man who has a
trade, who has practiced it long enough to see no news in any of it. Picture me, then. A
professional in his forties, three children, living in a university town—so, necessarily, well—
enlightened? Enough, anyhow. Successful in my work, yes. No overriding religious posture.
Nothing special, then, your routine fellow, trying to do his work and doing it well enough. Picture
me, this professional, a sort of scientist, if you please, in possession of the standard admirable
opinions, positions, convictions, and so on–on this and that matter–on abortion, for example.
All right. Now listen.
It is the western wing of the fourth floor of a great university hospital. I am present
because I asked to be present. I wanted to see what I had never seen: an abortion.
The patient is Jamaican. She lies on the table in that state of notable submissiveness I
have always seen in patients. Now and then she smiles at one of the nurses as though
acknowledging a secret.
A nurse draws down the sheet, lays bare the abdomen. The belly mounds gently in the
twenty-fourth week of pregnancy. The chief surgeon paints it with a sponge soaked in red
antiseptic. He does this three times, each time a fresh sponge. He covers the area with a sterile
sheet, an aperture in its center. He is a kindly man who teaches as he works, who pauses to
reassure the woman.
He begins.
“A little pinprick,” he says to the woman. He inserts the point of a tiny needle at the
midline of the lower portion of her abdomen, on the downslope. He infiltrates local anesthetic into
the skin, where it forms a small white bubble.
The woman grimaces. “That is all you will feel,” the doctor says, “except for a little
pressure. But no more pain.” She smiles again. She seems to relax. She settles comfortably on
the table. The worst is over.
The doctor selects a three-and-one-half-inch needle bearing a central stylet. He places
the point at the site of the previous injection. He aims it straight up and down, perpendicular.
Next he takes hold of her abdomen with his left hand, palming the womb, steadying it. He thrusts
with his right hand. The needle sinks into the abdominal wall.
“Oh,” says the woman quietly.
But I guess it is not pain she feels. It is more a recognition that the deed is being done. Another
thrust and he has speared the uterus.
“We are in,” he says. He has felt the muscular wall of the organ gripping the shaft of his
needle. A further slight pressure on the needle advances it a bit more. He takes his left hand
2
from the woman’s abdomen. He retracts the filament of the stylet from the bar.
1 Films on Africa 1. A star () next to a film i.docxoswald1horne84988
1
Films on Africa
1. A star (*) next to a film indicates that portions of that film might be shown in class in the course of
the semester.
2. All films are in DVD format, unless indicated otherwise.
3. Available: at the Madden and Fresno County Public Libraries, via Netflix, Blackboard or on-line.
4. For the on-line films, you can click on the link and this will lead you directly to the film.
5. Please be advised that a few films have the following notice: Warning: Contains scenes which some
viewers may find disturbing. You decide whether you want to watch them or not.
6. Some films are available on-line via VOD.
7. Let your instructor know if a link is no longer working.
The Africans (9 VHS films – each 60 min or 5 DVDs – each 120 min): Co-
production of WETA-TV and BBC-TV. Presented by Ali A. Mazrui. 1986.
Available at Madden Media & Fresno Public Libraries
Vol. 1 – The Nature of a continent*
Summary: Examines Africa as the birthplace of humankind and discusses
the impact of geography on African history, including the role of the Nile
in the origin of civilization and the introduction of Islam to Africa through its Arabic borders.
Vol. 2 – A Legacy of lifestyles*
Summary: This program explores how African contemporary lifestyles are influenced by
indigenous, Islamic and Western factors. It compares simple African societies with those that
are more complex and centralized, and examines the importance of family life.
Vol. 3 – New gods
Summary: This program examines the factors that influence religion in Africa, paying particular
attention to how traditional religions, Islam, and Christianity co-exist and influence each other.
Vol. 4 – Tools of exploitation
Summary: The impact of the West on Africa and the impact of Africa on the development of the
West are contrasted with an emphasis on the manner in which Africa's human and natural
resources have been exploited before, during, and after the colonial period.
Vol. 5 – New conflicts
Summary: Explores the tensions inherent in the juxtaposition of 3 African heritages, looking at
the ways in which these conflicts have contributed to the rise of the nationalist movement, the
warrior tradition of indigenous Africa, the jihad tradition of Islam, and modern guerilla warfare.
Vol. 6 – In search of stability
Summary: Gives an overview of the several means of governing in Africa. Examines new social
orders to illustrate an Africa in search of a viable form of government in the post-independence
period.
1.
2
Vol. 7 – A Garden of Eden in decay?
Summary: Identifies the problems of a continent that produces what it does not consume and
consumes what it does not produce. Shows Africa's struggle between economic dependence
and decay.
Vol. 8 – A Clash of cultures*
Summary: Discusses the conflicts and compromises which emerge from the coexistence of
many African traditions and modern life. Explores the question of whet.
1 Contemporary Approaches in Management of Risk in .docxoswald1horne84988
1
Contemporary Approaches in Management of Risk in Engineering Organizations
Assignment-1
Literature review
Student name: Hari Kiran Penumudi
student id: 217473484
Table of Contents
2
INTRODUCTION………………………………………………………………………3-4
OBJECTIVES & DELIVERABLES…………………………………………………....4
REVIEW OF LITERATURE…………………………………………………………....5-13
Risk and Risk Management………………………………………………………5-6
Risk Management Frameworks……………………………………………….....6-10
Importance of Risk Management in Engineering………………………….........10-13
GENERAL PROBLEM STATEMENT…………………………………………………13-14
RESEARH STRATEGY…………………………………………………………………14-15
RESOURCES REQUIREMENTS……………………………………………………….16
PROJECT PLANNING…………………………………………………………………..16
REFERNCES…………………………………………………………………………….17-19
Contemporary Approaches in Management of Risk in Engineering Organizations
3
Introduction
The term, ‘risk’ as defined by the Oxford English dictionary is a possibility to meet with any
kind of danger or suffer harm. Risk is a serious issue that every organization has to deal with in
their everyday operations. However, nature and magnitude of risks largely vary from
organization to organization and often depend on the type of the organization. Therefore,
organizations irrespective of their type of operations keep a risk management team that looks
after every risk to which an organization is vulnerable. Organizations in the field of engineering
also have to come across some inherent risks that negatively impact their operations. Engineering
may be defined as the process of applying science to practical purposes of designing structures,
systems, machines and similar things. Therefore, like every other organization, risk assessment
and management is also an integral part of engineering organizations. Since the task of
engineering is mostly complex, the risks in this area are also very complicated. If risks in
engineering field are not mitigated effectively it may produce long-term danger that may affect
both the organizational services and the society in whole. Hence, the activity of risk management
within engineering organizations must be undertaken seriously and measured thoroughly in order
to reduce the threat of risks. Amyotte et al., (2006) simply puts it like within the engineering
practice, an inbuilt risk is always present. Studies have found that despite the knowledge of
inherent risks within the field and activity of engineering, organizations are not very aware in
imparting knowledge about risk management to their engineers. From this the need of education
regarding the risk management approaches arises. Therefore, this paper tries to find out
approaches to management of risks and importance of these approaches within the area of
engineering. Bringing on the contemporary evidence from the literature review related to risk
management approaches, the paper examines how those approaches can be helpful for
4 .
1
Assignment front Sheet
Qualification Unit number and title
Pearson BTEC Levels 4 and 5 Higher
Nationals in Health and Social Care (RQF)
HNHS 17: Effective Reporting and Record-keeping in
Health and Social Care Services
Student name Assessor name Internal Verifier
B. Maher F. Khan
Date issued: Final Submission:
12/10/2018 18/01/2019
Assignment title
Effective Reporting and Record-keeping in Health and Social
Care services
Submission Format
This work will be submitted in 2 different formats:
Assessment 1 should be submitted as a word-processed report document in a standard report
style, which requires the use of headings, titles and appropriate captions. You may also choose
to include pictures, graphs and charts where relevant to support your work. The recommended
word count for this assignment is 1500–2000 words, though you will not be penalised for
exceeding this total.
Assessment 2 requires the submission of evidence from a mock training event on record-
keeping. This will include a set of materials used in the event, to include an electronic
presentation, evidence of your own record-keeping across a range of types of records, as well as
where you will demonstrate you have evaluated the effectiveness of your own completion of
relevant records. The recommended word count for the presentation is 1000–1500 words
(including speaker notes), though you will not be penalised for exceeding this total.
For both assessments, any material that is derived from other sources must be suitably
referenced using a standard form of citation. Provide a bibliography using the Harvard
referencing system.
Unit Learning Outcomes
LO1 Describe the legal and regulatory aspects of reporting and record keeping in a care setting
LO2 Explore the internal and external recording requirements in a care setting
Assignment Brief and Guidance
2
Purpose of this assignment:
The purpose of the assignment is to assess the learner firstly in relation to both the legal and
regulatory aspects of reporting and record keeping in a care setting through producing an internal
evaluative review of record keeping in their own care setting. Secondly, the learner will be
assessed on the internal and external recording requirements in a care setting. Thirdly, the learner
will be assessed on Review the use of technology in reporting and recording service user care in a
care setting and fourthly the learner will demonstrate how to keep and maintain records in own care
setting in line with national and local policies.
Breakdown of assignment:
Assignment:
You need to produce one written piece of work of 2,500 words (+/- 10%) covering all the
assessment criterion in LO1-LO4 as one document.
Unit Learning Outcomes
LO1 Describe the legal and regulatory aspects of reporting and record keeping in a care
setting
LO2 Explore the internal and external recording.
1 BBS300 Empirical Research Methods for Business .docxoswald1horne84988
1
BBS300 Empirical Research Methods for Business
TSA, 2018
Assignment 1
Due: Sunday, 7 October 2018,
23:55 PM
This assignment covers material from Sessions 1-4 and is worth 20% of your total mark
of BBS300. Your solutions should be properly presented, and it is important that you
double-check your spelling and grammar and thoroughly proofread your assignment
before submitting. Instructions for assignment submission are presented in
the “Assignment 1” link and must be strictly adhered to. No marks will be
awarded to assignments that are submitted after the due date and time.
All analyses must be carried out using SPSS, and no marks will be awarded
for assignment questions where SPSS output supporting your answer is not
provided in your Microsoft Word file submitted for the Assignment.
Questions
In this assignment, we will examine the “Real Estate Market” dataset (described at the
end of the assignment ) and “Employee Satisfaction” dataset. Before beginning the
assignment, read through the descriptions of these dataset and their variables carefully.
The “Real Estate Market” dataset can be found in the file “realestatemarket.sav,” and
the “Employee Satisfaction” dataset can be found in the file “employeesatisfaction.sav.”
You will need to carefully inspect both SPSS data files to be sure that the
specification of variable types is correct and, where appropriate, value
labels are entered.
1. (12 marks)
2
Use appropriate graphical displays and measures of centrality and dispersion
to summarise the following four variables in the “Real Estate Market” dataset. For
graphical displays for numeric data, be sure to comment on not only the shape of
the distribution but also compliance with a normal distribution. Be sure to
include relevant SPSS output (graphs, tables) to support your answers.
(a) Price.
(b) Lot Size.
(c) Material.
(d) Condition.
2. (8 marks)
Again consider the variable Price, which records the property price (in AUD). It
is of interest to know if this is associated with the distance of the property is
located to the train station. It i s al so of i nter e st t o kn o w if th e p rop ert y
pri ce s are a sso ciate d with di st an ce to t h e ne ar e st b u s sto p. Carry out
appropriate statistical techniques to assess whether there is a significant
association between the property price and distance to the nearest train (To train)
station and the nearest bus stop (To bus). Be sure to thoroughly assess the
assumptions of your particular analysis, and be sure to include relevant SPSS
output (graphs, tables) to support your answers.
3. (7 marks)
Consider the “Employee Satisfaction” dataset, which asked participants to provide their
level of regularity to a series of thirteen statements. Conduct an appropriate analysis
to assess the reliability of responses to these statements. If the reliability will
increa.
1 ASSIGNMENT 7 C – MERGING DATA FILES IN STATA Do.docxoswald1horne84988
1
ASSIGNMENT 7 C – MERGING DATA FILES IN STATA
Download the world development data covering the years 2000-2016 from the website
“http://databank.worldbank.org/data/reports.aspx?source=World-Governance-Indicators” for the
following upper-middle-income countries.
Countries of Interest:
Albania Ecuador Montenegro
Algeria Equatorial Guinea Namibia
American Samoa Fiji Nauru
Argentina Gabon Panama
Azerbaijan Grenada Paraguay
Belarus Guyana Peru
Belize Iran, Islamic Rep. Romania
Bosnia and Herzegovina Iraq Russian Federation
Botswana Jamaica Samoa
Brazil Kazakhstan Serbia
Bulgaria Lebanon South Africa
China Libya St. Lucia
Colombia Macedonia, FYR St. Vincent and the Grenadines
Costa Rica Malaysia Suriname
Croatia Maldives Thailand
Cuba Marshall Islands Tonga
Dominica Mauritius Turkey
Dominican Republic Mexico Turkmenistan
Tuvalu
Venezuela, RB
Variables of Interest
Control of Corruption: Estimate
Government Effectiveness: Estimate
Political Stability and Absence of Violence/Terrorism:
Estimate
Regulatory Quality: Estimate
Rule of Law: Estimate
Voice and Accountability: Estimate
2
STEP 1 - Download the data from the World-Governance-Indicators database as shown below
STEP 2 - Check the variables of interest
3
Please make sure you are checking the variables with “Estimates”.
TO VIEW THE DEFINITIONS OF THE VARIABLES
4
Step 3 – Select countries of interest
5
Step 4 – Click on “Time” and select the “year range” you are interested in (2000-2016)
6
Step 5 – Click on the “Layout” as shown below
Change the time layout to “Row,” series to “Column” and Country to “Row.”
Next, click on the “apply changes.”
Step 6 – Click on the “Download option” and select “Excel” as shown below
7
STEP 7: Using Excel, Replace the Missing Values With “.” (See previous assignments)
STEP 8: SAVE THE EXCEL DATA FILE ON YOUR COMPUTER PREFERABLY IN A
FOLDER
STEP 9: IMPORT YOUR DATA INTO STATA AND NAME YOUR DATA SET
“WORLD_GOVERNANCE_INDICATORS.” (See previous assignments for steps)
8
STEP 10; RENAME THE VARIABLES AS SHOWN BELOW (See previous assignments for
steps)
Using stata, merge the data set from “ASSIGNMENT 3B” with this dataset
VERY IMPORTANT Note: Merging two datasets requires that both have at least one variable in
common (either string or numeric).
This statement requires that the variable name for “Time” and “Country” should be the same in the two
data set
MERGING THE DATASET FROM “ASSIGNMENT 3” WITH THE DATA FROM THE
WORLD GOVERNANCE INDICATORS
Merging data files in stata
https://www.youtube.com/watch?v=EV-5PztbHs0
https://www.youtube.com/watch?v=Uh7C0mlhB3g&t=54s
https://www.youtube.com/watch?v=2etG_34ODoc
I will strongly encourage you to watch these videos before merging
I will also strongly recommend you read the notes in the link below before you star.
1 Assessment details for ALL students Assessment item.docxoswald1horne84988
1
Assessment details for ALL students
Assessment item 3 - Individual submission
Due date: Week 12 Monday (1 Oct 2018) 11:55 pm AEST
Weighting:
Length:
50% (or 50 marks)
There is no word limit for this report
Objectives
This assessment item relates to the unit learning outcomes as stated in the unit profile.
Enabling objectives
1. Analyse a case study and identify issues associated with the business;
2. Develop and deploy the application in IBM Bluemix;
3. Evaluate existing and new functionalities to address business problems;
4. Prepare a document to report your activities using text and multimedia (for example screenshots, videos).
General Information
The purpose of this assignment is to create a cloud based simulating environment which will help to
identify/understand the problem stated in the given case study using analysis tools available in IBM
Bluemix. In assignment three, you are working individually. By doing this assignment, you will
learn to use skills and knowledge of emerging technologies like cloud computing, IoT, to simulate a
business scenario to capture operational data and share with a visualization tool. You will acquire a
good understanding of smart application design in a cloud environment for efficient application
configuration and deployment.
What do you need to do?
The assignment requires you to do the following -
• Download the ‘Starter_Code_For_Assignment_Three.rar’ given in week 8 to
configure, and deploy a cloud based smart/IoT (Internet of Things) application to
simulate the business case.
• Choose a case study out of given two below and analyse the case study to
understand the business problem and design a solution for those problems.
• Deploy the starter source code in your Bluemix account and modify it to address
all required milestones mentioned in your chosen case study.
• Finally prepare a report according to given format and specifications below and
submit it in Moodle.
2
Report format and specifications -
You are required to submit a written report in a single Microsoft Word (.doc or .docx)
document. There is no word limit but any unnecessary information included in the report
may result in reduced marks.
The report must contain the following content (feel free to define your own sections,
as long as you include all the required content):
o Cover page/title page and Table of contents
o URL of the app and login details of the IBM Bluemix account
o Introduction
o Case study analysis which will report –
o Business problems you have identified in the case study
o Possible solutions for each and how do these solutions address the
business problems?
o What are the solutions you implemented in the application?
o The step by step process you have followed to configure and deploy the smart app
for business case simulation. You may choose to use screenshots and notes to
enrich your report but you must have a video of the pr.
1
CDU APA 6th
Referencing Style Guide
(February 2019 version)
2
Contents
APA Fundamentals .......................................................................................... 3
Reference List ................................................................................................... 3
Citing in the text ............................................................................................... 5
Paraphrase ................................................................................................... 5
Direct quotes................................................................................................. 5
Secondary source .......................................................................................... 6
Personal communications............................................................................. 6
Examples .......................................................................................................... 7
Book .............................................................................................................. 7
eBook ............................................................................................................ 7
Journal article with doi ................................................................................ 7
Journal article without doi ........................................................................... 7
Web page ...................................................................................................... 7
Books - print and online ................................................................................... 8
Single author ................................................................................................ 8
eBook/electronic book ................................................................................ 11
Journal articles, Conference papers and Newspaper articles ........................ 13
Multimedia ..................................................................................................... 16
YouTube or Streaming video ..................................................................... 16
Online images ................................................................................................. 17
Web sources and online documents ................................................................ 20
Web page .................................................................................................... 20
Document from a website ........................................................................... 21
Legislation and cases ...................................................................................... 23
Common abbreviations .................................................................................. 24
Appendix 1: How to write an APA reference when information is missing .. 25
Appendix 2: Author layout.
1
BIOL 102: Lab 9
Simulated ABO and Rh Blood Typing
Objectives:
After completing this laboratory assignment, students will be able to:
• explain the biology of blood typing systems ABO and Rh
• explain the genetics of blood types
• determine the blood types of several patients
Introduction:
Before Karl Landsteiner discovered the ABO human blood groups in 1901, it was thought that all blood was the
same. This misunderstanding led to fatal blood transfusions. Later, in 1940, Landsteiner was part of a team
who discovered another blood group, the Rh blood group system. There are many blood group systems known
today, but the ABO and the Rh blood groups are the most important ones used for blood transfusions. The
designation Rh is derived from the Rhesus monkey in which the existence of the Rh blood group was
discovered.
Although all blood is made of the same basic elements, not all blood is alike. In fact, there are eight different
common blood types, which are determined by the presence or absence of certain antigens – substances that
can trigger an immune response if they are foreign to the body – on the surface of the red blood cells (RBCs
also known as erythrocytes).
ABO System:
The antigens on RBCs are agglutinating antigens or agglutinogens. They have been designated as A and B.
Antibodies against antigens A and B begin to build up in the blood plasma shortly after birth. A person
normally produces antibodies (agglutinins) against those antigens that are not present on his/her erythrocytes
but does not produce antibodies against those antigens that are present on his/her erythrocytes.
• A person who is blood type A will have A antigens on the surface of her/his RBCs and will have
antibodies against B antigens (anti-B antibodies). See picture below.
• A person with blood type B will have B antigens on the surface of her/his RBCs and will have antibodies
against antigen A (anti-A antibodies).
• A person with blood type O will have neither A nor B antigens on the surface of her/his RBCs and has
BOTH anti-A and anti-B antibodies.
• A person with blood type AB will have both A and B antigens on the surface of her/his RBCs and has
neither anti-A nor anti-B antibodies.
The individual’s blood type is based on the antigens (not the antibodies) he/she has. The four blood groups
are known as types A, B, AB, and O. Blood type O, characterized by an absence of A and B agglutinogens, is
the most common in the United States (45% of the population). Type A is the next in frequency, found in 39%
of the population. The incidences of types B and AB are 12% and 4%, respectively.
2
Table 1: The ABO System
Blood
Type
Antigens on
RBCs
Antibodies
in the Blood
Can GIVE Blood
to Groups:
Can RECEIVE
Blood from Groups:
A A Anti-B A, AB O, A
B B Anti-A B, AB O, B
AB A and B
Neither anti-A
nor anti-B
AB O, A, B, AB
O
Neither A nor
B
Both anti-A.
1
Business Intelligence Case
Project Background
Mell Industries is a national manufacturing firm that specializes in textiles based out of
Chicago. Starting out as a small factory in Warrenville, Illinois, the firm experienced a period of steady
growth over the past twenty-four years. Steadily opening new warehouses and factories in the
surrounding areas in Michigan and Indianapolis until eventually moving their base of operations to
Chicago. Due to this expansion, Mell Industries is at the height of its production and hopes to avoid any
interferences or deceleration of growth.
In recent years, the firm has been under heavy media scrutiny for supposedly compensating its
female staff unfairly lower compared to male counterparts. This was initiated when a disgruntled
employee leaked the company payroll allegedly showcasing an unjust gap of income between the
female employee and her male counterpart. This type of gender pay gap is highly criticized and as a
precaution, Mell Industries has hired Cal Poly Pomona to conduct research to determine the validity of
these claims. Mell Industries has provided Cal Poly Pomona with a data set of a sample population of
747 employees. Mell Industries has also offered Cal Poly Pomona compensation for any promising
information gathered. Mell Industries may use information gathered from this project in future
employee compensation decisions.
The initial dataset has been given to you in the form of an excel spreadsheet titled
Case_dataset.xlsx consisting of 12 columns labeled:
● Column A - Employee ID
● Column B - Gender
● Column C - Date of Birth
● Column D - Date of Hire
● Column E - Termination Date
● Column F - Occupation
● Column G - Salary
● Column H to L - Employee Evaluation Metrics
In addition, Mell Industries provided the latest annual employee performance review evaluation
results rating each employee in various performance categories. They have turned over this information
separately and as a consultant, it is your task to provide Mell Industries with the most accurate and
relevant information in a digestible form. Furthermore, using excel skills learned during the course, you
will manipulate and analyze the data set in order to make appropriate managerial decisions. You will
utilize excel functions highlighted in this project as well as a pivot table and chart to form a decision
support system in order to answer the critical thinking questions.
Project Objective
The purpose of this project is to perform a methodical data analysis to assist the company make
an informed decision. This could also serve as a basis for implementing critical adjustments to certain
business aspects if necessary. Illustrate the business process by condensing a large set of data, to
present relevant information with data visualization. We will be utilizing Microsoft Excel 2016 to
complete this project.
2
TA.
1 Essay #2 Multimodal Analysis In this 4-5 page p.docxoswald1horne84988
1
Essay #2 Multimodal Analysis
In this 4-5 page paper, you will pick an advertisement about The Walking Dead to analyze and
evaluate how it creates an argument through multimodality.
Most media you encounter each day combines modes—news articles include photographs;
television shows include audio, verbal text, and gestures; websites make use of alphabetic text
and spatial arrangement; music contains both lyrics and sound. Even an academic paper has
multimodal elements such as font choice, double-spacing, margins, etc. By analyzing multimodal
texts you can become a more active viewer of the media that surrounds us and understand how
media shapes our understanding of the world.
Ultimately, your goal is to recognize and evaluate different modes in order to discover how the
modes work together to create arguments and how they respond to rhetorical situations. Your
thesis should make an argument for how you interpret the ad’s message and whether the ad is
successful or not (i.e. is it persuasive for its intended audience) based on its use of visual and
rhetorical strategies. In other words, you will take a stance about the piece and make an argument
about its messages and rhetorical strategies. In the body of your essay, you will use rhetorical
appeals (ethos, pathos, logos) and concepts from visual design to specifically focus on HOW the
visual rhetoric works, not simply WHAT it conveys: discuss how the use of rhetorical appeals
determines the effectiveness of the visual argument. To complete the essay successfully, you
will need to discuss specific and concrete elements of the image/commercial as visual and/or
audio evidence.
Assignment Objectives
• To gain the ability to recognize the modes and media elements in a multimodal text.
• To use multimodal evidence to make an argument.
• To improve the ability to describe evidence in specific detail.
• To strengthen critical thinking and analysis skills
• To understand a multimodal text in terms of its rhetorical situation.
• To become an active viewer of multimodal texts.
Assignment Requirements
• 4-5 page essay, double-spaced, 12-point TNR font
• Includes a clear introduction that identifies all elements of rhetorical situation for the ad
(speaker, purpose/message, intended audience, contexts)
• Includes an argumentative thesis that provides an interpretation of the ad’s message and a
claim about its rhetorical effectiveness based on rhetorical and visual/audio strategies
• Includes clear, claim-based topic sentences that organize the essay around analytical
points
• Analyzes evidence from the ad (does not summarize) by interpreting concrete details for
the reader
• A conclusion that summarizes main points and provides some kind of application for
readers
2
Aspects of Multimodality to Consider
The following are the five main modes that can be found in a multimodal text with some
examples of elements .
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
1 Name _____________________________ MTH129 Fall .docxoswald1horne84988
1
Name: _____________________________
MTH129 Fall 2018 - FINAL EXAM A
Show all work neatly on paper provided. Label all work. Place final answers on the answer sheet.
PART I: Omit 1 complete question. Place an “X” on the problems & answer space you are omitting.
1. Find the inverse of the following functions:
a. 𝑓(𝑥) = 2𝑥 − 3
b. 𝑓(𝑥) =
3𝑥 +1
𝑥−2
2. If 𝑓(𝑥) = 𝑥 2 − 2𝑥 + 3 and 𝑔(𝑥) = −3𝑥 + 4, find the following:
a. (𝑓°𝑔)(𝑥) b. (𝑓°𝑔)(2)
3. Find the domain for the following expression:
a) √𝑥 + 5 𝑏) 7𝑥 2 + 3𝑥 − 1 𝑐)
𝑥 2+4
𝑥 2−9
4. Find the radian measures of the angles with the given degree measures.
a) 81°
Find the degree measures of the angles with the given radian measures.
b)
13𝜋
6
5. Solve the following equations:
a) (5t) = 20
b) 6000 = 40(15)t
6. Expand the following logarithmic expressions:
a. log(𝐴𝐵2 )
b. ln(
4
√3
)
7. Describe how the graph of each function can be obtained from the graph f
a. 𝑦 = 𝑓(𝑥) − 8
b. 𝑦 = 𝑓(𝑥 + 4) − 5
8. A real number t is given 𝑡 =
2𝜋
3
a. Find the reference number for t.
b. Find the terminal point P(x,y) on the unit circle determined by t
c. The unit circle is centered at __________________ and has a radius of _________________
PART II: Omit 1 complete question. Place an “X” on the problems & answer space you are omitting.
2
1. A sum of $7,000 is invested at an interest rate of 4
1
2
% per year, compounding monthly. (round all answers to
the nearest cent)
a. Find the amount of the investment after 2
1
2
years.
b. How long will it take for the investment to amount to $12,000?
c. Using the information in part (a), find the amount of the investment if compounded quarterly.
2. When a company charges price p dollars for one of its products, its revenue is given by
𝑅 = 𝑓(𝑝) = 500𝑝(30 − 𝑝)
a. Create a quadratic function for price with respect to revenue.
b. What price should they charge in order to maximize their revenue?
c. What is the maximum revenue?
d. What would be the revenue if the price was set at $10?
e. Sketch a rough graph – indicate the intercepts and the maximum coordinates.
3. The charges for a taxi ride are an initial charge of $2.50 and $0.85 for each mile driven.
a. Write a function for the charge of a taxi ride as a linear function of the distance traveled.
b. What is the cost of a 12 mile trip?
c. Find the equation of a line that passes through the following points: (1,-2) , (2,5) Express in 𝑦 =
𝑚𝑥 + 𝑏 form
d. Graph part ( c )
4. a. Divide the following polynomial and factor completely.
𝑃(𝑥) = 3𝑥 4 − 9𝑥 3 − 2𝑥 2 + 5𝑥 + 3; 𝑐 = 3
b. Given polynomial−𝑥 2 + 5𝑥 − 6, state the end behavior of its graph.
c. Using the polynomial on part ( c ), would this g
1 Lab 8 -Ballistic Pendulum Since you will be desig.docxoswald1horne84988
1
Lab 8 -Ballistic Pendulum
Since you will be designing your own procedure you will have two
class periods to take the required data.
The goal of this lab is to measure the speed of a ball that is fired
from a projectile launcher using two different methods. The
Projectile launcher has three different settings, “Short Range,”
“Medium Range” and “Long Range,” however you will only need to
determine the speed for any ONE of these Range settings.
Method 1 involves firing the ball directly into the “Ballistic
Pendulum” shown below in Figure 2 for which limited instructions will be provided. Method 2
is entirely up to your group. While you have significant freedom to design your own procedure,
you will need to worry about the random and systematic uncertainties you are introducing
based on your procedure. This manual will provide a few hints to help reduce a few of those
uncertainties.
The ballistic pendulum pictured in Figure 2 is important canonical problem students study to
explore the conservation of momentum and energy. The ball is fired by the projectile launcher
into a “perfectly inelastic collision” with the pendulum. The pendulum then swings to some
maximum angle which is measured by an Angle Indicator.
Caution: The pendulum has a plastic hinge and Angle Indicator which are both fragile. Be
gentle.
Study the ballistic pendulum carefully. Before we begin, here are a few things to consider and
be aware of in Figure 2:
Projectile launcher
Angle indicator (curved
black bar)
Clamp
Pendulum (can be removed
for measurements)
Figure 2: Ballistic Pendulum
Plumb bob
Firing string
Release
point
Figure 1: Projectile Launcher
Bolt for removing pendulum
2
A. Clamping the ballistic pendulum to the table will reduce random uncertainties in the
speed with which the projectile launcher releases the ball. Similarly, you should check
that the various bolts are snug and that the ball is always fully inside the launcher (not
rolling around inside the barrel of launcher).
B. If the lab bench is not perfectly horizontal the plumb bob and angle indicator will not
read zero degrees before you begin your experiment. You should fix AND/OR account
for these discrepancies.
C. In Figure 3 you will notice a tiny gap between the launcher and the pendulum. This
important gap prevents the launcher from contacting the pendulum directly as the ball
is fired. Without this gap an unknown amount of momentum is transferred from the
launcher directly to the pendulum (in addition to the momentum transferred by the
ball) significantly complicating our experiment.
Figure 3: Important gap between Launcher and Pendulum
Equipment
1 Ballistic Pendulum (shown in Figure 2)
A bag with three balls
1 loading rod
1 Clamp
1 triple beam balance scale
Safety goggles for each group member
Any equipment found in your equipment drawer.
Reasonable equipment reque.
1 I Samuel 8-10 Israel Asks for a King 8 When S.docxoswald1horne84988
1
I Samuel 8-10
Israel Asks for a King
8 When Samuel grew old, he appointed his sons as Israel’s leaders.[a]2 The
name of his firstborn was Joel and the name of his second was Abijah, and
they served at Beersheba. 3 But his sons did not follow his ways. They turned
aside after dishonest gain and accepted bribes and perverted justice.
4 So all the elders of Israel gathered together and came to Samuel at
Ramah. 5 They said to him, “You are old, and your sons do not follow your
ways; now appoint a king to lead[b] us, such as all the other nationshave.”
6 But when they said, “Give us a king to lead us,” this displeasedSamuel; so
he prayed to the LORD. 7 And the LORD told him: “Listen to all that the people
are saying to you; it is not you they have rejected, but they have rejected
me as their king. 8 As they have done from the day I brought them up out of
Egypt until this day, forsaking me and serving other gods, so they are doing
to you. 9 Now listen to them; but warn them solemnly and let them
know what the king who will reign over them will claim as his rights.”
10 Samuel told all the words of the LORD to the people who were asking him
for a king. 11 He said, “This is what the king who will reign over you will claim
as his rights: He will take your sons and make them serve with his chariots
and horses, and they will run in front of his chariots. 12 Some he will assign to
be commanders of thousands and commanders of fifties, and others to plow
his ground and reap his harvest, and still others to make weapons of war
and equipment for his chariots. 13 He will take your daughters to be
perfumers and cooks and bakers. 14 He will take the best of your fields and
vineyards and olive groves and give them to his attendants. 15 He will take a
tenth of your grain and of your vintage and give it to his officials and
attendants. 16 Your male and female servants and the best of your cattle[c] and
donkeys he will take for his own use. 17 He will take a tenth of your flocks,
and you yourselves will become his slaves. 18 When that day comes, you will
cry out for relief from the king you have chosen, but the LORD will not
answer you in that day.”
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7371a
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7375b
https://www.biblegateway.com/passage/?search=1%20Samuel+8&version=NIV#fen-NIV-7386c
2
19 But the people refused to listen to Samuel. “No!” they said. “We wanta
king over us. 20 Then we will be like all the other nations, with a king to lead
us and to go out before us and fight our battles.”
21 When Samuel heard all that the people said, he repeated it before
the LORD. 22 The LORD answered, “Listen to them and give them a king.”
Then Samuel said to the Israelites, “Everyone go back to your own town.”
Samuel Anoints Saul
9 There was a Benjamite, a man of standing, whose n.
1 Journal Entry #9 What principle did you select .docxoswald1horne84988
1
Journal Entry #9
What principle did you select?
I selected principle 1 of part 1, “Don’t criticize, condemn or complain”.
Who did you interact with?
For this assignment I interacted with my younger cousin.
What was the context?
I had visited my Aunty and she and her husband asked me to stay a while as I was on school
break. They accommodated me and I decided in return to help look after my cousin in the period
when he got out of school and before they got back from work. He is 5 years old and can be quite
the handful.
What did you expect?
I expected that an authoritative approach would easily compel him to follow my instructions so
that the transition from school life into home life would be easy.
What happened?
At first, I used commanding language to get him to change out of his uniform or properly store
his back pack and books before stepping out to play. The first day was difficult and the way I
deal with him were not getting through. On the 2nd day, the same was observed. On the 3rd day,
before he could drop his back pack and run out, I offered to make him a sandwich to eat before
he left to play if he would change and clean up. He rushed up stairs and freshened up. On the
next day, he came home and rushed up to change and freshen up all on his own. I had not
initially offered; but I made him a sandwich regardless.
How did it make you feel?
It made me feel good to be able to get through to my cousin. After this, if I ever needed him to
do something in a better way than previously, I would encourage him onto a different way of
accomplishing the same. I would often offer praise after adoption of the new suggested method
was adopted or offered incentive.
2
What did you learn?
I learnt that in criticizing a person’s action, it is difficult to deter their belief in their methods,
values or beliefs. This usually just gives them the will to justify or defend their positions. It is
almost an exercise in futility to attempt to effect change by complaining, condemning or
criticizing.
What surprised you?
I was surprised by how fast the change was effected after the shift in direction I took to approach
my cousin. In not criticizing his way of doing things any longer and employing a different tactic,
I was able to influence his routine as well as build good rapport with him.
Going forward, how can you apply what you learnt?
Going forward I will attempt to understand that everyone has a belief or image of their own that I
should respect. These beliefs, systems and values are crucial to their inherent dignity and to
criticize or attack this will only fuel conflict.
Running head: Physical activity project 1
Physical activity project:
A 7-day analysis and action plans
Student Name
National University
Physical activity project 2
Introduction
Physical activity (PA) has been a major component of public health since the rise of
chronic illnesses .
1
HCA 448 Case 2 for 10/04/2018
Recently, a patient was transferred to a cardiac intensive care unit (CICU) at Methodist Hospital.
Methodist is a 250-bed hospital, which is one of five hospitals in the University Health System.
The patient was a retired 72-year-old man, who recently (i.e., 25 days ago) had a mild heart
attack and was treated and released from a sister hospital, which is in the same system as
Methodist Hospital. An otherwise health individual, Mr. Charlie Johnson (a husband, father of 4,
and grandfather of 12) is in now need or lots of medication and a battery of tests. To the nurses
on shift, it appears that the entire Johnson family is in patient’s room watching the clinical staff
treated Mr. Johnson. The family overhears everything and they want to know what is being done
to (and for) their loved one. In addition, they want to know the meaning behind the various beeps
coming from the many machines attached to Mr. Johnson.
Over the past 10 years, the latest U.S. News and World report has ranked Methodist Hospital as
one of the Best Hospitals for Cardiology & Heart Surgery. However, it is important to note that
over the past few years, the unit has dropped in the rankings.
Katherine Ross RN, the patient care director of the CICU, which has 14 beds, has held this post
for two years. (See Figure) The unit has a $20 million budget. Ms. Ross has worked at Methodist
Hospital for 16 years. She spends 50 percent of her time on patient safety, 25 percent on staffing
and recruitment, and 20 percent with nurses in relation to their satisfaction with the work and
with families relative to their satisfaction with care. Ten percent of Ms. Ross’s time is spent on
administrative duties. According to Ms. Ross, “I like is working with exceptional nurses who are
very smart and do what it takes with limited resources. However, we don’t always feel
empowered, despite the existence of shared governance, a structure I help to coordinate.”
2
Relationship with Nurses on the Unit:
Nurses on the unit work a three day a week, 12 hours a shift. Ms. Ross says, “we did an
employee opinion survey that went to all employees on the unit, 50 people in all, but only 13
responded. Some of them weren’t sure who their supervisor was. The employees aren’t happy
but our patients are happy.” She adds that “my name is on the unit, not the medical director’s. If
anything goes wrong with the unit, they blame it on nursing. Yet I’m brushed off by people
whom I have to deal with outside of the unit. For example, we have a problem with machines
that analyze blood gases. I spoke with the people there about the technology. This was four
weeks ago. It’s a patient safety issue. I sent them e-mails. I need the work to get done, the staff
don’t feel empowered if I’m not empowered. This goes for other departments as well. For
example, respiratory therapy starts using a new ventilator witho.
1
HC2091: Finance for Business
Trimester 2 2018
Group Assignment
Assessment Value: 20%
Due Date: Sunday 23:59 pm, Week 10
Group: 2- 4 students
Length: Min 2500 words
INSTRUCTIONS
Students are required to form a group to study, undertake research, analyse and conduct academic
work within the areas of business finance covered in learning materials Topics 1 to 10 inclusive.
The assignment should examine the main issues, including underlying theories, implement
performance measures used and explain the firm financial performance. Your group is strongly
advised to reference professional websites, journal articles and text books in this assignment (case
study).
Tasks
This assessment task is a written report and analysis of the financial performance of a selected
listed company on the ASX in order to provide financial and investment advice to a wealthy
investor. This assignment requires your group to undertake a comprehensive examination of a
firm’s financial performance based on update financial statements of the chosen companies.
Group Arrangement
This assignment must be completed IN Group. Each group can be from 2 to maximum 4 student
members. Each group will choose 1 company and once the company has been chosen, the other
group cannot choose the same company. First come first served rule applies here, it means you
need to form your group, choose on company from the list of ASX and register them with your
lecturer as soon as possible. Once your lecturer registers your chosen company, it cannot be
chosen by any other group. Your lecturer then will put your group on Black Board to enable you
to interact and discuss on the issues of your group assignment using Black Board environment.
However, face to face meeting, discussion and other methods of communication are needed to
ensure quality of group work. Each group needs to have your own arrangement so that all the
group members will contribute equally in the group work. If not, a Contribution Statement,
which clearly indicated individual contribution (in terms of percentage) of each member, should
be submitted as a separate item in your assignment. Your individual contribution then will be
assessed based on contribution statement to avoid any free riders.
2
Submission
Please make sure that your group member’s name and surname, student ID, subject name, and
code and lecture’s name are written on the cover sheet of the submitted assignment.
When you submit your assignment electronically, please save the file as ‘Group Assignment-
your group name .doc’. You are required to submit the assignment at Group Assignment
Final Submission, which is under Group Assignment and Due Dates on Black Board.
Submitted work should be your original work showing your creativity. Please ensure the self-
check for plagiarism to be done before final submission (plagiarism check is not over 30% .
1 ECE 175 Computer Programming for Engineering Applica.docxoswald1horne84988
1
ECE 175: Computer Programming for Engineering Applications
Homework Assignment 6
Due: Tuesday March 12, 2019 by 11.59 pm
Conventions: Name your C programs as hwxpy.c where x corresponds to the homework number and y
corresponds to the problem number. For example, the C program for homework 6, problem 1 should be
named as hw6p1.c.
Write comments to your programs. Programs with no comments will receive PARTIAL credit. For each
program that you turn in, at least the following information should be included at the top of the C file:
- Author and Date created
- Brief description of the program:
- input(s) and output(s)
- brief description or relationship between inputs and outputs
Submission Instructions: Use the designated Dropbox on D2L to submit your homework.
Submit only the .c files.
Problem 1 (15 points) Write a program that returns the minimum value and its location, max
value and its location and average value of an array of integers. Your program should call a
single function that returns that min and its location, max and its location and mean value of
the array. Print the results in the main function (not within the array_func function).
See sample code execution below. The declaration of this function is given below:
void array_func (int *x, int size, int *min_p, int *minloc_p, int *max_p, int *maxloc_p, double *mean_p)
/* x is a pointer to the first array element
size is the array size
min_p is a pointer to a variable min in the main function that holds the minimum
minloc_p is a pointer to a variable minloc in the main function that holds the location where the
minimum is.
max_p is a pointer to a variable max in the main function that holds the maximum
maxloc_p is a pointer to a variable maxloc in the main function that holds the location where the
maximum is.
mean_p is a pointer to a variable mean in the main function that holds the mean */
Declare the following array of integers within the main function:
Sample code execution:
int data_ar[] = { -3, 5, 6, 7, 12, 3, 4, 6, 19, 23, 100, 3, 4, -2, 9, 43, 32, 45,
32, 2, 3, 2, -1, 8 };
int data_ar2[] = { -679,-758,-744,-393,-656,-172,-707,-32,-277,-47,-98,-824,-695,
-318,-951,-35,-439,-382,-766,-796,-187,-490,-446,-647};
int data_ar3[] = {-142, -2, -56, -60, 114, -249, 45, -139, -25, 17, 75, -27, 158,
-48, 33, 67, 9, 89, 33, -78, -180, 186, 218, -274};
2
Problem 2 (20 points): A barcode scanner verifies the 12-digit code scanned by comparing the
code’s last digit to its own computation of the check digit calculated from the first 11 digits as
follows:
1. Calculate the sum of the digits in the odd-numbered indices (the first, third, …, ninth
digits) and multiply this sum by 3.
2. Calculate the sum of the digits in the even-numbered indices (the 0th, second, … tenth
digits).
3. Add the results from step 1 and 2. If the last digit of the addition result is 0, then 0 is the
check digit. .
1 Cinemark Holdings Inc. Simulated ERM Program .docxoswald1horne84988
1
Cinemark Holdings Inc.: Simulated ERM Program
Ben Li, Assistant Vice President of Compliance, is assigned the responsibility of developing an ERM
program at Cinemark Holdings Inc. (CHI). Over the past year, Ben has put in place the following ERM
activities:
Risk Identification and Assessment
The risk identification and assessment process steps are as follows:
1) Conduct online surveys of the heads of the 10 business segments and their 1-2 direct reports (15
people) and their mid-level managers (80 people). Exhibit 1 shows the instructions that are
included in the online survey. Exhibit 2 shows samples of the information collected from the
online survey.
2) Each of the 10 business segments separately organizes and compiles the results of the online
survey. They typically compile a robust list of 70-80 potential key risks. Each business segment
then prioritizes their top-5 risks and reports them to Ben Li, resulting in a total of 50 key risks (a
partial sample of the top-50 risk list is shown in Exhibit 3).
3) A consensus meeting is conducted where the 50 risks are shared with the top 10 members of
senior management in an open-group setting at an offsite one-day event. The 50 risks are each
discussed one at a time, after which the facilitator has the group collectively discuss and score
them for likelihood and severity. The risk ranking is calculated as the likelihood score plus the
severity score; the control effectiveness score is used to determine if there is room to improve
the controls and is used in the risk decision making process step. The top-20 risks are identified
as the key risks to CHI and are selected for additional mitigation and advanced to the risk
decision making stage. A Heat Map (see Exhibit 4) is provided to assist in this effort.
4) The 30 risks remaining from the 50 discussed at the consensus meeting are considered the non-
key risks, and these are monitored with key risk indicators to see if, over time, either the
likelihood and/or severity is increasing to the level which would result in one of these being
elevated to a key risk.
Risk Decision Making
Ben Li formed a Risk Committee to look at the risk identification and assessment information and to
define CHI’s risk appetite and risk limits, which were defined as follows:
Risk Appetite
CHI will maintain its overall risk profile in a manner consistent with our mission and vision and with the
expectations of our shareholders.
Risk Limits
CHI will also avoid any individual risk exposures deemed excessive by its Risk Committee; the individual
risk exposures will be determined separately for each key risk. CHI has zero tolerance for risks related to
internal fraud or violations of the employee code of conduct.
2
Ben Li expanded the role of the Risk Committee to also select and implement the risk mitigation for each
of the 20 key risks, at the same time as the committee determines the risk limits. .
1 Figure 1 Picture of Richard Selzer Richard Selz.docxoswald1horne84988
1
Figure 1 Picture of Richard Selzer
Richard Selzer
What I Saw at the Abortion
I am a surgeon. Sick flesh is everyday news. Escaping blood, all the outpourings of
disease, meaty tumors that terrify–I touch these to destroy them. But I do not make symbols of
them.
What I am saying is that I have seen and I am used to seeing. I am a man who has a
trade, who has practiced it long enough to see no news in any of it. Picture me, then. A
professional in his forties, three children, living in a university town—so, necessarily, well—
enlightened? Enough, anyhow. Successful in my work, yes. No overriding religious posture.
Nothing special, then, your routine fellow, trying to do his work and doing it well enough. Picture
me, this professional, a sort of scientist, if you please, in possession of the standard admirable
opinions, positions, convictions, and so on–on this and that matter–on abortion, for example.
All right. Now listen.
It is the western wing of the fourth floor of a great university hospital. I am present
because I asked to be present. I wanted to see what I had never seen: an abortion.
The patient is Jamaican. She lies on the table in that state of notable submissiveness I
have always seen in patients. Now and then she smiles at one of the nurses as though
acknowledging a secret.
A nurse draws down the sheet, lays bare the abdomen. The belly mounds gently in the
twenty-fourth week of pregnancy. The chief surgeon paints it with a sponge soaked in red
antiseptic. He does this three times, each time a fresh sponge. He covers the area with a sterile
sheet, an aperture in its center. He is a kindly man who teaches as he works, who pauses to
reassure the woman.
He begins.
“A little pinprick,” he says to the woman. He inserts the point of a tiny needle at the
midline of the lower portion of her abdomen, on the downslope. He infiltrates local anesthetic into
the skin, where it forms a small white bubble.
The woman grimaces. “That is all you will feel,” the doctor says, “except for a little
pressure. But no more pain.” She smiles again. She seems to relax. She settles comfortably on
the table. The worst is over.
The doctor selects a three-and-one-half-inch needle bearing a central stylet. He places
the point at the site of the previous injection. He aims it straight up and down, perpendicular.
Next he takes hold of her abdomen with his left hand, palming the womb, steadying it. He thrusts
with his right hand. The needle sinks into the abdominal wall.
“Oh,” says the woman quietly.
But I guess it is not pain she feels. It is more a recognition that the deed is being done. Another
thrust and he has speared the uterus.
“We are in,” he says. He has felt the muscular wall of the organ gripping the shaft of his
needle. A further slight pressure on the needle advances it a bit more. He takes his left hand
2
from the woman’s abdomen. He retracts the filament of the stylet from the bar.
1 Films on Africa 1. A star () next to a film i.docxoswald1horne84988
1
Films on Africa
1. A star (*) next to a film indicates that portions of that film might be shown in class in the course of
the semester.
2. All films are in DVD format, unless indicated otherwise.
3. Available: at the Madden and Fresno County Public Libraries, via Netflix, Blackboard or on-line.
4. For the on-line films, you can click on the link and this will lead you directly to the film.
5. Please be advised that a few films have the following notice: Warning: Contains scenes which some
viewers may find disturbing. You decide whether you want to watch them or not.
6. Some films are available on-line via VOD.
7. Let your instructor know if a link is no longer working.
The Africans (9 VHS films – each 60 min or 5 DVDs – each 120 min): Co-
production of WETA-TV and BBC-TV. Presented by Ali A. Mazrui. 1986.
Available at Madden Media & Fresno Public Libraries
Vol. 1 – The Nature of a continent*
Summary: Examines Africa as the birthplace of humankind and discusses
the impact of geography on African history, including the role of the Nile
in the origin of civilization and the introduction of Islam to Africa through its Arabic borders.
Vol. 2 – A Legacy of lifestyles*
Summary: This program explores how African contemporary lifestyles are influenced by
indigenous, Islamic and Western factors. It compares simple African societies with those that
are more complex and centralized, and examines the importance of family life.
Vol. 3 – New gods
Summary: This program examines the factors that influence religion in Africa, paying particular
attention to how traditional religions, Islam, and Christianity co-exist and influence each other.
Vol. 4 – Tools of exploitation
Summary: The impact of the West on Africa and the impact of Africa on the development of the
West are contrasted with an emphasis on the manner in which Africa's human and natural
resources have been exploited before, during, and after the colonial period.
Vol. 5 – New conflicts
Summary: Explores the tensions inherent in the juxtaposition of 3 African heritages, looking at
the ways in which these conflicts have contributed to the rise of the nationalist movement, the
warrior tradition of indigenous Africa, the jihad tradition of Islam, and modern guerilla warfare.
Vol. 6 – In search of stability
Summary: Gives an overview of the several means of governing in Africa. Examines new social
orders to illustrate an Africa in search of a viable form of government in the post-independence
period.
1.
2
Vol. 7 – A Garden of Eden in decay?
Summary: Identifies the problems of a continent that produces what it does not consume and
consumes what it does not produce. Shows Africa's struggle between economic dependence
and decay.
Vol. 8 – A Clash of cultures*
Summary: Discusses the conflicts and compromises which emerge from the coexistence of
many African traditions and modern life. Explores the question of whet.
1 Contemporary Approaches in Management of Risk in .docxoswald1horne84988
1
Contemporary Approaches in Management of Risk in Engineering Organizations
Assignment-1
Literature review
Student name: Hari Kiran Penumudi
student id: 217473484
Table of Contents
2
INTRODUCTION………………………………………………………………………3-4
OBJECTIVES & DELIVERABLES…………………………………………………....4
REVIEW OF LITERATURE…………………………………………………………....5-13
Risk and Risk Management………………………………………………………5-6
Risk Management Frameworks……………………………………………….....6-10
Importance of Risk Management in Engineering………………………….........10-13
GENERAL PROBLEM STATEMENT…………………………………………………13-14
RESEARH STRATEGY…………………………………………………………………14-15
RESOURCES REQUIREMENTS……………………………………………………….16
PROJECT PLANNING…………………………………………………………………..16
REFERNCES…………………………………………………………………………….17-19
Contemporary Approaches in Management of Risk in Engineering Organizations
3
Introduction
The term, ‘risk’ as defined by the Oxford English dictionary is a possibility to meet with any
kind of danger or suffer harm. Risk is a serious issue that every organization has to deal with in
their everyday operations. However, nature and magnitude of risks largely vary from
organization to organization and often depend on the type of the organization. Therefore,
organizations irrespective of their type of operations keep a risk management team that looks
after every risk to which an organization is vulnerable. Organizations in the field of engineering
also have to come across some inherent risks that negatively impact their operations. Engineering
may be defined as the process of applying science to practical purposes of designing structures,
systems, machines and similar things. Therefore, like every other organization, risk assessment
and management is also an integral part of engineering organizations. Since the task of
engineering is mostly complex, the risks in this area are also very complicated. If risks in
engineering field are not mitigated effectively it may produce long-term danger that may affect
both the organizational services and the society in whole. Hence, the activity of risk management
within engineering organizations must be undertaken seriously and measured thoroughly in order
to reduce the threat of risks. Amyotte et al., (2006) simply puts it like within the engineering
practice, an inbuilt risk is always present. Studies have found that despite the knowledge of
inherent risks within the field and activity of engineering, organizations are not very aware in
imparting knowledge about risk management to their engineers. From this the need of education
regarding the risk management approaches arises. Therefore, this paper tries to find out
approaches to management of risks and importance of these approaches within the area of
engineering. Bringing on the contemporary evidence from the literature review related to risk
management approaches, the paper examines how those approaches can be helpful for
4 .
1
Assignment front Sheet
Qualification Unit number and title
Pearson BTEC Levels 4 and 5 Higher
Nationals in Health and Social Care (RQF)
HNHS 17: Effective Reporting and Record-keeping in
Health and Social Care Services
Student name Assessor name Internal Verifier
B. Maher F. Khan
Date issued: Final Submission:
12/10/2018 18/01/2019
Assignment title
Effective Reporting and Record-keeping in Health and Social
Care services
Submission Format
This work will be submitted in 2 different formats:
Assessment 1 should be submitted as a word-processed report document in a standard report
style, which requires the use of headings, titles and appropriate captions. You may also choose
to include pictures, graphs and charts where relevant to support your work. The recommended
word count for this assignment is 1500–2000 words, though you will not be penalised for
exceeding this total.
Assessment 2 requires the submission of evidence from a mock training event on record-
keeping. This will include a set of materials used in the event, to include an electronic
presentation, evidence of your own record-keeping across a range of types of records, as well as
where you will demonstrate you have evaluated the effectiveness of your own completion of
relevant records. The recommended word count for the presentation is 1000–1500 words
(including speaker notes), though you will not be penalised for exceeding this total.
For both assessments, any material that is derived from other sources must be suitably
referenced using a standard form of citation. Provide a bibliography using the Harvard
referencing system.
Unit Learning Outcomes
LO1 Describe the legal and regulatory aspects of reporting and record keeping in a care setting
LO2 Explore the internal and external recording requirements in a care setting
Assignment Brief and Guidance
2
Purpose of this assignment:
The purpose of the assignment is to assess the learner firstly in relation to both the legal and
regulatory aspects of reporting and record keeping in a care setting through producing an internal
evaluative review of record keeping in their own care setting. Secondly, the learner will be
assessed on the internal and external recording requirements in a care setting. Thirdly, the learner
will be assessed on Review the use of technology in reporting and recording service user care in a
care setting and fourthly the learner will demonstrate how to keep and maintain records in own care
setting in line with national and local policies.
Breakdown of assignment:
Assignment:
You need to produce one written piece of work of 2,500 words (+/- 10%) covering all the
assessment criterion in LO1-LO4 as one document.
Unit Learning Outcomes
LO1 Describe the legal and regulatory aspects of reporting and record keeping in a care
setting
LO2 Explore the internal and external recording.
1 BBS300 Empirical Research Methods for Business .docxoswald1horne84988
1
BBS300 Empirical Research Methods for Business
TSA, 2018
Assignment 1
Due: Sunday, 7 October 2018,
23:55 PM
This assignment covers material from Sessions 1-4 and is worth 20% of your total mark
of BBS300. Your solutions should be properly presented, and it is important that you
double-check your spelling and grammar and thoroughly proofread your assignment
before submitting. Instructions for assignment submission are presented in
the “Assignment 1” link and must be strictly adhered to. No marks will be
awarded to assignments that are submitted after the due date and time.
All analyses must be carried out using SPSS, and no marks will be awarded
for assignment questions where SPSS output supporting your answer is not
provided in your Microsoft Word file submitted for the Assignment.
Questions
In this assignment, we will examine the “Real Estate Market” dataset (described at the
end of the assignment ) and “Employee Satisfaction” dataset. Before beginning the
assignment, read through the descriptions of these dataset and their variables carefully.
The “Real Estate Market” dataset can be found in the file “realestatemarket.sav,” and
the “Employee Satisfaction” dataset can be found in the file “employeesatisfaction.sav.”
You will need to carefully inspect both SPSS data files to be sure that the
specification of variable types is correct and, where appropriate, value
labels are entered.
1. (12 marks)
2
Use appropriate graphical displays and measures of centrality and dispersion
to summarise the following four variables in the “Real Estate Market” dataset. For
graphical displays for numeric data, be sure to comment on not only the shape of
the distribution but also compliance with a normal distribution. Be sure to
include relevant SPSS output (graphs, tables) to support your answers.
(a) Price.
(b) Lot Size.
(c) Material.
(d) Condition.
2. (8 marks)
Again consider the variable Price, which records the property price (in AUD). It
is of interest to know if this is associated with the distance of the property is
located to the train station. It i s al so of i nter e st t o kn o w if th e p rop ert y
pri ce s are a sso ciate d with di st an ce to t h e ne ar e st b u s sto p. Carry out
appropriate statistical techniques to assess whether there is a significant
association between the property price and distance to the nearest train (To train)
station and the nearest bus stop (To bus). Be sure to thoroughly assess the
assumptions of your particular analysis, and be sure to include relevant SPSS
output (graphs, tables) to support your answers.
3. (7 marks)
Consider the “Employee Satisfaction” dataset, which asked participants to provide their
level of regularity to a series of thirteen statements. Conduct an appropriate analysis
to assess the reliability of responses to these statements. If the reliability will
increa.
1 ASSIGNMENT 7 C – MERGING DATA FILES IN STATA Do.docxoswald1horne84988
1
ASSIGNMENT 7 C – MERGING DATA FILES IN STATA
Download the world development data covering the years 2000-2016 from the website
“http://databank.worldbank.org/data/reports.aspx?source=World-Governance-Indicators” for the
following upper-middle-income countries.
Countries of Interest:
Albania Ecuador Montenegro
Algeria Equatorial Guinea Namibia
American Samoa Fiji Nauru
Argentina Gabon Panama
Azerbaijan Grenada Paraguay
Belarus Guyana Peru
Belize Iran, Islamic Rep. Romania
Bosnia and Herzegovina Iraq Russian Federation
Botswana Jamaica Samoa
Brazil Kazakhstan Serbia
Bulgaria Lebanon South Africa
China Libya St. Lucia
Colombia Macedonia, FYR St. Vincent and the Grenadines
Costa Rica Malaysia Suriname
Croatia Maldives Thailand
Cuba Marshall Islands Tonga
Dominica Mauritius Turkey
Dominican Republic Mexico Turkmenistan
Tuvalu
Venezuela, RB
Variables of Interest
Control of Corruption: Estimate
Government Effectiveness: Estimate
Political Stability and Absence of Violence/Terrorism:
Estimate
Regulatory Quality: Estimate
Rule of Law: Estimate
Voice and Accountability: Estimate
2
STEP 1 - Download the data from the World-Governance-Indicators database as shown below
STEP 2 - Check the variables of interest
3
Please make sure you are checking the variables with “Estimates”.
TO VIEW THE DEFINITIONS OF THE VARIABLES
4
Step 3 – Select countries of interest
5
Step 4 – Click on “Time” and select the “year range” you are interested in (2000-2016)
6
Step 5 – Click on the “Layout” as shown below
Change the time layout to “Row,” series to “Column” and Country to “Row.”
Next, click on the “apply changes.”
Step 6 – Click on the “Download option” and select “Excel” as shown below
7
STEP 7: Using Excel, Replace the Missing Values With “.” (See previous assignments)
STEP 8: SAVE THE EXCEL DATA FILE ON YOUR COMPUTER PREFERABLY IN A
FOLDER
STEP 9: IMPORT YOUR DATA INTO STATA AND NAME YOUR DATA SET
“WORLD_GOVERNANCE_INDICATORS.” (See previous assignments for steps)
8
STEP 10; RENAME THE VARIABLES AS SHOWN BELOW (See previous assignments for
steps)
Using stata, merge the data set from “ASSIGNMENT 3B” with this dataset
VERY IMPORTANT Note: Merging two datasets requires that both have at least one variable in
common (either string or numeric).
This statement requires that the variable name for “Time” and “Country” should be the same in the two
data set
MERGING THE DATASET FROM “ASSIGNMENT 3” WITH THE DATA FROM THE
WORLD GOVERNANCE INDICATORS
Merging data files in stata
https://www.youtube.com/watch?v=EV-5PztbHs0
https://www.youtube.com/watch?v=Uh7C0mlhB3g&t=54s
https://www.youtube.com/watch?v=2etG_34ODoc
I will strongly encourage you to watch these videos before merging
I will also strongly recommend you read the notes in the link below before you star.
1 Assessment details for ALL students Assessment item.docxoswald1horne84988
1
Assessment details for ALL students
Assessment item 3 - Individual submission
Due date: Week 12 Monday (1 Oct 2018) 11:55 pm AEST
Weighting:
Length:
50% (or 50 marks)
There is no word limit for this report
Objectives
This assessment item relates to the unit learning outcomes as stated in the unit profile.
Enabling objectives
1. Analyse a case study and identify issues associated with the business;
2. Develop and deploy the application in IBM Bluemix;
3. Evaluate existing and new functionalities to address business problems;
4. Prepare a document to report your activities using text and multimedia (for example screenshots, videos).
General Information
The purpose of this assignment is to create a cloud based simulating environment which will help to
identify/understand the problem stated in the given case study using analysis tools available in IBM
Bluemix. In assignment three, you are working individually. By doing this assignment, you will
learn to use skills and knowledge of emerging technologies like cloud computing, IoT, to simulate a
business scenario to capture operational data and share with a visualization tool. You will acquire a
good understanding of smart application design in a cloud environment for efficient application
configuration and deployment.
What do you need to do?
The assignment requires you to do the following -
• Download the ‘Starter_Code_For_Assignment_Three.rar’ given in week 8 to
configure, and deploy a cloud based smart/IoT (Internet of Things) application to
simulate the business case.
• Choose a case study out of given two below and analyse the case study to
understand the business problem and design a solution for those problems.
• Deploy the starter source code in your Bluemix account and modify it to address
all required milestones mentioned in your chosen case study.
• Finally prepare a report according to given format and specifications below and
submit it in Moodle.
2
Report format and specifications -
You are required to submit a written report in a single Microsoft Word (.doc or .docx)
document. There is no word limit but any unnecessary information included in the report
may result in reduced marks.
The report must contain the following content (feel free to define your own sections,
as long as you include all the required content):
o Cover page/title page and Table of contents
o URL of the app and login details of the IBM Bluemix account
o Introduction
o Case study analysis which will report –
o Business problems you have identified in the case study
o Possible solutions for each and how do these solutions address the
business problems?
o What are the solutions you implemented in the application?
o The step by step process you have followed to configure and deploy the smart app
for business case simulation. You may choose to use screenshots and notes to
enrich your report but you must have a video of the pr.
1
CDU APA 6th
Referencing Style Guide
(February 2019 version)
2
Contents
APA Fundamentals .......................................................................................... 3
Reference List ................................................................................................... 3
Citing in the text ............................................................................................... 5
Paraphrase ................................................................................................... 5
Direct quotes................................................................................................. 5
Secondary source .......................................................................................... 6
Personal communications............................................................................. 6
Examples .......................................................................................................... 7
Book .............................................................................................................. 7
eBook ............................................................................................................ 7
Journal article with doi ................................................................................ 7
Journal article without doi ........................................................................... 7
Web page ...................................................................................................... 7
Books - print and online ................................................................................... 8
Single author ................................................................................................ 8
eBook/electronic book ................................................................................ 11
Journal articles, Conference papers and Newspaper articles ........................ 13
Multimedia ..................................................................................................... 16
YouTube or Streaming video ..................................................................... 16
Online images ................................................................................................. 17
Web sources and online documents ................................................................ 20
Web page .................................................................................................... 20
Document from a website ........................................................................... 21
Legislation and cases ...................................................................................... 23
Common abbreviations .................................................................................. 24
Appendix 1: How to write an APA reference when information is missing .. 25
Appendix 2: Author layout.
1
BIOL 102: Lab 9
Simulated ABO and Rh Blood Typing
Objectives:
After completing this laboratory assignment, students will be able to:
• explain the biology of blood typing systems ABO and Rh
• explain the genetics of blood types
• determine the blood types of several patients
Introduction:
Before Karl Landsteiner discovered the ABO human blood groups in 1901, it was thought that all blood was the
same. This misunderstanding led to fatal blood transfusions. Later, in 1940, Landsteiner was part of a team
who discovered another blood group, the Rh blood group system. There are many blood group systems known
today, but the ABO and the Rh blood groups are the most important ones used for blood transfusions. The
designation Rh is derived from the Rhesus monkey in which the existence of the Rh blood group was
discovered.
Although all blood is made of the same basic elements, not all blood is alike. In fact, there are eight different
common blood types, which are determined by the presence or absence of certain antigens – substances that
can trigger an immune response if they are foreign to the body – on the surface of the red blood cells (RBCs
also known as erythrocytes).
ABO System:
The antigens on RBCs are agglutinating antigens or agglutinogens. They have been designated as A and B.
Antibodies against antigens A and B begin to build up in the blood plasma shortly after birth. A person
normally produces antibodies (agglutinins) against those antigens that are not present on his/her erythrocytes
but does not produce antibodies against those antigens that are present on his/her erythrocytes.
• A person who is blood type A will have A antigens on the surface of her/his RBCs and will have
antibodies against B antigens (anti-B antibodies). See picture below.
• A person with blood type B will have B antigens on the surface of her/his RBCs and will have antibodies
against antigen A (anti-A antibodies).
• A person with blood type O will have neither A nor B antigens on the surface of her/his RBCs and has
BOTH anti-A and anti-B antibodies.
• A person with blood type AB will have both A and B antigens on the surface of her/his RBCs and has
neither anti-A nor anti-B antibodies.
The individual’s blood type is based on the antigens (not the antibodies) he/she has. The four blood groups
are known as types A, B, AB, and O. Blood type O, characterized by an absence of A and B agglutinogens, is
the most common in the United States (45% of the population). Type A is the next in frequency, found in 39%
of the population. The incidences of types B and AB are 12% and 4%, respectively.
2
Table 1: The ABO System
Blood
Type
Antigens on
RBCs
Antibodies
in the Blood
Can GIVE Blood
to Groups:
Can RECEIVE
Blood from Groups:
A A Anti-B A, AB O, A
B B Anti-A B, AB O, B
AB A and B
Neither anti-A
nor anti-B
AB O, A, B, AB
O
Neither A nor
B
Both anti-A.
1
Business Intelligence Case
Project Background
Mell Industries is a national manufacturing firm that specializes in textiles based out of
Chicago. Starting out as a small factory in Warrenville, Illinois, the firm experienced a period of steady
growth over the past twenty-four years. Steadily opening new warehouses and factories in the
surrounding areas in Michigan and Indianapolis until eventually moving their base of operations to
Chicago. Due to this expansion, Mell Industries is at the height of its production and hopes to avoid any
interferences or deceleration of growth.
In recent years, the firm has been under heavy media scrutiny for supposedly compensating its
female staff unfairly lower compared to male counterparts. This was initiated when a disgruntled
employee leaked the company payroll allegedly showcasing an unjust gap of income between the
female employee and her male counterpart. This type of gender pay gap is highly criticized and as a
precaution, Mell Industries has hired Cal Poly Pomona to conduct research to determine the validity of
these claims. Mell Industries has provided Cal Poly Pomona with a data set of a sample population of
747 employees. Mell Industries has also offered Cal Poly Pomona compensation for any promising
information gathered. Mell Industries may use information gathered from this project in future
employee compensation decisions.
The initial dataset has been given to you in the form of an excel spreadsheet titled
Case_dataset.xlsx consisting of 12 columns labeled:
● Column A - Employee ID
● Column B - Gender
● Column C - Date of Birth
● Column D - Date of Hire
● Column E - Termination Date
● Column F - Occupation
● Column G - Salary
● Column H to L - Employee Evaluation Metrics
In addition, Mell Industries provided the latest annual employee performance review evaluation
results rating each employee in various performance categories. They have turned over this information
separately and as a consultant, it is your task to provide Mell Industries with the most accurate and
relevant information in a digestible form. Furthermore, using excel skills learned during the course, you
will manipulate and analyze the data set in order to make appropriate managerial decisions. You will
utilize excel functions highlighted in this project as well as a pivot table and chart to form a decision
support system in order to answer the critical thinking questions.
Project Objective
The purpose of this project is to perform a methodical data analysis to assist the company make
an informed decision. This could also serve as a basis for implementing critical adjustments to certain
business aspects if necessary. Illustrate the business process by condensing a large set of data, to
present relevant information with data visualization. We will be utilizing Microsoft Excel 2016 to
complete this project.
2
TA.
1 Essay #2 Multimodal Analysis In this 4-5 page p.docxoswald1horne84988
1
Essay #2 Multimodal Analysis
In this 4-5 page paper, you will pick an advertisement about The Walking Dead to analyze and
evaluate how it creates an argument through multimodality.
Most media you encounter each day combines modes—news articles include photographs;
television shows include audio, verbal text, and gestures; websites make use of alphabetic text
and spatial arrangement; music contains both lyrics and sound. Even an academic paper has
multimodal elements such as font choice, double-spacing, margins, etc. By analyzing multimodal
texts you can become a more active viewer of the media that surrounds us and understand how
media shapes our understanding of the world.
Ultimately, your goal is to recognize and evaluate different modes in order to discover how the
modes work together to create arguments and how they respond to rhetorical situations. Your
thesis should make an argument for how you interpret the ad’s message and whether the ad is
successful or not (i.e. is it persuasive for its intended audience) based on its use of visual and
rhetorical strategies. In other words, you will take a stance about the piece and make an argument
about its messages and rhetorical strategies. In the body of your essay, you will use rhetorical
appeals (ethos, pathos, logos) and concepts from visual design to specifically focus on HOW the
visual rhetoric works, not simply WHAT it conveys: discuss how the use of rhetorical appeals
determines the effectiveness of the visual argument. To complete the essay successfully, you
will need to discuss specific and concrete elements of the image/commercial as visual and/or
audio evidence.
Assignment Objectives
• To gain the ability to recognize the modes and media elements in a multimodal text.
• To use multimodal evidence to make an argument.
• To improve the ability to describe evidence in specific detail.
• To strengthen critical thinking and analysis skills
• To understand a multimodal text in terms of its rhetorical situation.
• To become an active viewer of multimodal texts.
Assignment Requirements
• 4-5 page essay, double-spaced, 12-point TNR font
• Includes a clear introduction that identifies all elements of rhetorical situation for the ad
(speaker, purpose/message, intended audience, contexts)
• Includes an argumentative thesis that provides an interpretation of the ad’s message and a
claim about its rhetorical effectiveness based on rhetorical and visual/audio strategies
• Includes clear, claim-based topic sentences that organize the essay around analytical
points
• Analyzes evidence from the ad (does not summarize) by interpreting concrete details for
the reader
• A conclusion that summarizes main points and provides some kind of application for
readers
2
Aspects of Multimodality to Consider
The following are the five main modes that can be found in a multimodal text with some
examples of elements .
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
· What Did Robert Merton Know, AnywayChapter 12 discussed Polic.docx
1. · What Did Robert Merton Know, Anyway?
Chapter 12 discussed Policing and Special Populations. In a 1-2
page paper, using examples from policing, determine how
prejudice and discrimination intersect with each other.
You are encouraged to seek examples from at least three (3)
external sources.
Here are some notes down below to help!!
Police and Crime Prevention
The idea of crime prevention as an important function of
policing can be traced to Sir Robert Peel who established crime
prevention as one of the Metropolitan London Police goals.
Since the President’s Commission on Law Enforcement and
Administration of Justice Report in the late 1960s, crime
prevention has become an acceptable function of policing in
America. The concept of crime prevention involves education,
training, public relations, and the development of strategies to
prevent criminal activities. For the last several decades, there
have been a variety of crime prevention studies, programs, and
strategies advocated to help prevent the individual,
neighborhoods, and government and private organizations from
becoming victims of crime.
The community has a role to play in crime prevention. National
commissions such as the President’s Commission on Law
Enforcement and Administration of Justice and the National
Advisory Commission on Criminal Justice and Goals brought to
national attention the importance of crime prevention for the
community. The goal of Community Crime Prevention Programs
(CCPPs) in the 1970s indicated that community organizations
and local institutions had an important role in crime prevention
efforts. The goal was for the police and community
organizations to provide the impetus in neighborhood crime
prevention efforts.
In the final decades of the twentieth century the police came to
the realization, with a push from the federal government
2. studies, that crime cannot be solved when left without the
cooperation and assistance of the community. Only when citizen
participation exists in crime prevention can we expect that
crime can be reduced.
A community crime prevention approach involves the police and
the communities working together not only to reduce crime but
also to prevent it. To achieve community crime prevention
several techniques and strategies are put into operation.
Defensible Space as a crime prevention approach is workable
and to a great extent successful. Defensible space provides
residents with a secure environment relatively free from crime.
Another technique similar to “defensible space” is Crime
Prevention Through Environmental Design (CPTED). This
concept holds that crime prevention involves the physical
design of buildings along with citizen involvement and the
effective use of police agencies. The thrust of the CPTED model
implies that the physical environment can be orchestrated to
prevent potential offenders from committing incidents of crime
along with improving the quality of life. The third strategy to
prevent crime is Situational Crime Prevention. This approach
hopes to reduce the “opportunity for crime.” Techniques used in
“situational crime prevention” include a wide variety of crime
prevention categories. They can include: burglar alarms, fenced
yards, graffiti cleaning, street lighting, baggage screening,
CCTV systems, identification cards, and credit card
photographs.
The concept of neighborhoods and communities being involved
in crime prevention fits into the concept of community policing.
Crime prevention and community policing are interrelated.
Police agencies have integrated their crime prevention efforts
into community policing. Crime prevention deals with problem
solving and can be incorporated into the community policing
operations. The linkage of crime prevention and community
policing can only strengthen the security and safety of
neighborhoods and the community as a whole. The goal should
be to integrate crime prevention into community policing
3. operations. Sweden provides an example of how an integrated,
comprehensive community crime prevention effort can be
mounted
Police and Special Populations
In this chapter, we focused on how police departments interact
with subordinate groups, those that do not possess power and
resources in society. The three such groups we examined in this
manner are racial and ethnic groups (especially African
Americans), women, and homosexuals. We learned about how
prejudice (an attitude) and discrimination (actions) are related
and operate together to produce certain forms of behavior, some
of which result in the unequal treatment of subordinate groups
by the police. We examined in particular research findings that
elucidate how the police in terms of three questions deal with
certain racial and ethnic groups, women, and homosexuals. The
first question is how members of a subordinate group who are
victims of crime are treated; the second is how the police deal
with members of a subordinate group who are offenders and
finally, we consider how well attempts at including members of
subordinate groups in police departments by hiring them as
police officers have worked. We then focus on the experience of
another country, the United Kingdom, in working out its own
police-subordinate group interrelationships.
Paper 2
· The photo on the phone
In 2013 the town of Steubenville in Ohio gained national
attention when two of its star high school football players were
found guilty of raping a classmate. In 2013 a Canadian teenager
committed suicide following an alleged gang rape.
For this assignment you are going to examine the concept of
rape and the social media. Select a case that has involved rape
or rape allegations (can be one above or one you research) and
explore that case’s facts in terms of the common law and
modern day rape laws.
Consider what influence social media as we know it today can,
did or should play in such cases. In the case of juvenile
4. offenders how should these crimes be treated? Develop a
specific proposal addressing how we should deal with juvenile
rape cases both in terms of offenders and victims.
Your paper is to be 2-4 pages long use APA format and include
at least two (2) outside sources that are to be properly cited and
referenced.
Here are some notes down below to help!!
Sex Offenses
Chapter 10
Crimes Against Persons II: Sex Offenses
Rape is second only to murder in being regarded by law and
society as the most serious crime. This isn’t just true today.
Rape was punishable by death in several states from colonial
times until 1977, when the Supreme Court declared that
execution for the crime of rape was cruel and unusual
punishment.
Rape is a seriouscrime even if victims suffer no physical injury.
That’s because rape violates intimacy and autonomy. Rape and
other sexual assaults are different from all other felonies
because under other circumstances, the behaviors connected
with them aren’t just legal, they’re healthy and wanted. One of
the most critical problems in sex offenses is to distinguish
between flirting and seduction and sexual assault.
Sex Offenses
Originally, the criminal law recognized only two sex offenses—
rape and sodomy. Common law rape was strictly limited to
intentional, forced, nonconsensual, heterosexual vaginal
penetration. Legally, men couldn’t rape their wives.
Common law sodomy meant anal intercourse between two
males. Modern court opinions have relaxed the strict definition
of “rape.” And criminal sexual conduct statutes enacted in the
1970s and the 1980s have expanded the definition of “sex
offenses.”
Reforms in sex offense law were brought about as a result of the
knowledge that the vast majority of rape victims are raped by
men they know. The criminal justice system deals fairly well
5. with aggravated rapes but not well with unarmed acquaintance
rapes.
This is because:
· victims aren’t likely to report unarmed acquaintance rapists,
or they don’t recognize them as rapes;
· when victims do report them, the police are less likely to
believe the victims than they are the victims of aggravated rape;
· prosecutors are less likely to charge unarmed acquaintance
rapists;
· juries are less likely to convict unarmed acquaintance rapists;
· unarmed acquaintance rapists are likely to escape punishment
if their victims don’t follow the rules of middle-class morality
This problem is made worse by the fact that most rapes are
unarmed acquaintance rapes. Another aspect of rape is the
number of victims that are men. It is almost impossible to get
details about how many men are victims of rape.
Common-law rape is intentional, forced heterosexual vaginal
penetration by a man with a woman not his wife. Four elements
were included in this definition of rape;
(1) sexual intercourse by force or a threat of severe bodily harm
(actus reus);
(2) intentional vaginal intercourse (mens rea);
(3) intercourse between a man and a woman who wasn’t his wife
(attendant circumstance);
(4) intercourse without the woman’s consent (attendant
circumstance).
At trial women were allowed to testify against their rapist but
the credibility of the woman depended on three criteria that
were difficult, if not impossible, to satisfy:
(1) her chastity
(2) whether she promptly reported the rape
(3) whether other witnesses corroborated her rape
The 1970s and 1980s were a time of major reform of sex offense
laws. Many states abolished the corroboration rule. Also, most
states passed rape shield statutes. Many states also relaxed the
prompt-reporting rule.
6. States also changed the definition of rape. For example, all but
a few states did away with the marital rape exception, the old
common-law rule that husbands couldn’t rape their wives.
Sexual assault statutes have also shifted the emphasis away
from whether there was consent by the victim to the unwanted
advances by the perpetrator.
The most far-reaching reforms in the definition of rape are
included in the sexual assault statutes of the 1970s and the
1980s, which consolidated the sex offenses into one
comprehensive statute. The definition of rape and sex offenses
was expanded to include all sexual penetrations: vaginal, anal,
and oral and they created less serious crimes of sexual contacts.
Finally, sex crimes were made sex neutral.
The seriousness of sex offenses under the new codes is graded
according to several criteria:
(1) penetrations are more serious than contacts
(2) forcible penetrations and contacts are more serious than
simple nonconsensual penetrations and contacts
(3) physical injury to the victim aggravates the offense
(4) rapes involving more than one rapist, “gang rapes,” are more
serious than those involving a single rapist
Most legislatures and courts still define rape narrowly. In
acquaintance rape cases, in most states, nonconsensual sex is
not rape unless the perpetrator employs force or a threat of
force, or the victim is unconscious, badly drunk, underage, or
otherwise incapacitated.
Modern Rape Law
Most traditional rape statutes, and the newer criminal sexual
assault laws, define rape as intentional sexual penetration by
force without consent. There are many variations in the statutes,
but in most jurisdictions, rape today boils down to three
elements:
1. actus reus – sexual penetration by force or threat of force
2. mens rea – intentional sexual penetration
3. circumstance – nonconsent by the victim
Rape is a crime of violence; its actus reus is sexual intercourse
7. by force. For most of its history, rape actus reus was governed
by the force and resistance rule. The “force” part of the rule
wasn’t satisfied if victims consented to sexual intercourse. The
resistance part of the rule meant the victim had to prove that she
had resisted.
The amount of resistance required to prove lack of consent has
changed over time. In the 1950s, most courts softened the
utmost resistance definition to the reasonable resistance rule,
the rule followed in almost all states today. According to the
rule, the amount of resistance depends on the
totalityofcircumstances in each case.
Many new rape and sexual assault statutes have dropped the
resistance requirement entirely—at least in formal law. Courts
today have adopted either of two definitions of “force”:
extrinsic force and intrinsic force.
· Extrinsic force in rape requires some force in addition to the
amount needed to accomplish the penetration.
· Intrinsic force in rape requires only the amount of force
necessary to accomplish the penetration.
The actual use of force isn’t required to satisfy the force
requirement. The threat of force is enough. To satisfy the
threat-of-force requirement, the prosecution has to prove the
victim experienced two kinds of fear: subjective fear and
objective fear.
· Subjectivefear means that the victim honestly feared imminent
and serious bodily harm
· Objectivefear means that the fear was reasonable under the
circumstances
Some empirical research from the late 1970s and early 1980s
reported that resistance might put victims’ lives at risk. Studies
from the 1990s have uncovered shortcomings in these earlier
findings. For one thing, stranger rapes were overrepresented.
Some important details about acquaintance rape can provide an
understanding of the effect of victim resistance.
· First, victims usually resist unwanted advances because
they’re not afraid men they know will hurt them.
8. · Second, resistance usually succeeds.
· Finally, the most sophisticated empirical studies of the 1990s
found that victim resistance is not what provokes rapists to
injure their victims. Rather, initial rapist violence provokes
victim resistance (Bryden 2000, 367).
The law has never required physical resistance in all cases. No
resistance is required if victims were incapacitated at the time
of the assault by intoxication, mental deficiency, or insanity.
Deception (fraud) can substitute for force. These cases fall into
two categories, fraud in the fact and fraud in the inducement.
· Fraudin the fact consists of tricking the victim into believing
the act she consented to was not sexual intercourse. This type of
intercourse is rape. Intercourse obtained by fraud in the
inducement is not rape.
· Fraudin the inducement (in rape) occurs when the fraud is in
the benefits promised, not in the act.
· Finally, sexual intercourse with a minor who consented is rape
because the law doesn’t recognize the consent of minors.
Rape is a general-intent crime. This, of course, doesn’t mean
there can’t be a different state of mind regarding circumstance
elements, specifically nonconsent. These circumstance elements
center around mistakes—mistakes about age in the cases
involving underage victims or mistakes about the consent to
sexual penetration by competent adult victims.
Since it is impossible to knowingly or purposely make a
mistake, that leaves three types of mens rea: reckless mistakes,
negligent mistakes, or no-fault mistakes (strict liability). The
states are divided as to which mental element to require.
Statutoryrape is to have carnal knowledge of a person under the
age of consent whether or not accomplished by force. Statutory
rapists don’t have to use force and nonconsent isn’t an element
because the victim’s immaturity means force isn’t necessary and
minors can’t legally consent to sex. Thus rape is a strict
liability crime in most states. Some states do permit the defense
of reasonable mistake of age if the defendant reasonably
believed his victim was at or over the age of consent.
9. Most statutes divide rape into two degrees: simple (second-
degree) rape and aggravated (first-degree) rape. Aggravated
rape involves at least one of the following circumstances: the
victim suffers serious bodily injury, a stranger commits the
rape, the rape occurs in connection with another crime, the
rapist is armed, the rapist has accomplices or the victim is a
minor and the rapist is several years older. All other rapes are
“simple” rapes, for which the penalties are less severe.
Crimes Against Persons II
Chapter 10
Crimes Against Persons II: Bodily Injury and Personal Restraint
Assault and battery, although combined in many modern
statutes, are two separate crimes.
· A battery is an unwanted and unjustified offensive touching.
· An assault is either an attempted or a threatened battery,
depending on how the statute defines it.
The essential difference between assault and battery is that
assault requires no physical contact; an assault is complete
before the offender touches the victim. Stalking involves
intentionally scaring another person by following, tormenting,
or harassing him or her.
The battery actus reus is unlawful touching. Unlawful touching
includes a broad spectrum of acts but usually means any
unjustified touching without consent. Statutes don’t always
spell out the battery mens rea. Modern courts and statutes
extend battery mens rea to reckless and negligent contacts.
Battery requires some injury. Batteries that cause minor
physical injury or emotional injury are misdemeanors in most
states. Batteries that cause serious bodily injury are felonies.
Some code provisions are directed at injuries caused by special
circumstances. Two examples include harm caused by pit bulls
and harm caused by drugs.
Assaults are either attempted batteries or threatened batteries,
depending on the state. Attempted battery assault consists of
having the specific intent to commit a battery and taking
substantial steps toward carrying it out without actually
10. completing the attempt.
Threatened battery assault, sometimes called the crime of
“intentional scaring,” requires only that actors intend to
frighten their victims, thus expanding assault beyond attempted
battery. Threatened battery doesn’t require actually having the
intent to injure their victims physically; the intent to frighten
victims into believing the actor will hurt them is enough.
Victims’ awareness is critical to proving threatened battery
assault.Specifically, victims’ fear of an immediate battery has
to be reasonable. Words alone aren’t assaults; threatening
gestures have to accompany them. Conditional threats aren’t
enough either because they’re not immediate.
Domestic Violence Crimes
Since the early 1970s, violence in the family has been
transformed from a private concern to a criminal justice
problem. Violence in intimate relationships is extensive and is
not limited to one socioeconomic group, one society, or one
period of time.
Every type and form of family and intimate relationship has the
potential of being violent. Cyberstalking is defined as “the use
of the Internet, e-mail or other electronic communications
devices to stalk another person through threatening behavior”
(Mishler 2000, 117).
Stalking Crimes
Stalking is an ancient practice but only a modern crime; it
involves intentionally scaring another person by following,
tormenting, or harassing him or her. Statutes criminalizing
stalking “intended to fill gaps in the law by criminalizing
conduct that fell short of assault or battery … by insuring that
victims did not have to be injured or threatened with death
before stopping a stalker’s harassment” (Curry v. State 2002).
Statutes making stalking a crime began in California but other
states quickly followed California’s example; today every state
and the U.S. government have stalking statutes. Although many
victims are celebrities the vast majority are “ordinary” people,
most of them women.
11. The antistalking statutes vary enormously from state to state
and the U.S. statute. The National Criminal Justice Association
has a model stalking law and many states have adopted parts of
it. The statute states that
· “Any person who purposely engages in a course of conduct
directed at a specific person that would cause a reasonable
person to fear bodily injury to himself or herself or a member of
his or her immediate family or to fear the death of himself or
herself or a member of his or her immediate family; and has
knowledge or should have knowledge that the specific person
will be placed in reasonable fear of bodily injury to himself or
herself or a member of his or her immediate family or to fear
the death of himself or herself or his or her immediate family;
and whose acts induce fear in the specific person of bodily
injury to himself or herself or a member of his or her immediate
family or induce fear in the specific individual of the death of
himself or herself or a member of his or her immediate family;
is guilty of stalking.”
Despite great diversity from state to state, the stalking statutes
all share some common requirements when it comes to the
criminal act of stalking. All 50 states require that the act happen
more than once. As to the kind of conduct that has to be
repeated, all states require some variation of the model code’s
“maintaining a visual or physical proximity.” These acts include
following, pursuing, spying, and/or harassing.
About half the states require some kind of threat, including the
model code’s “verbal or written threats or threats implied by
conduct,” “threat,” “terroristic threat,” or “credible threat”
(LaFave 2003a, 832). Other statutes list very specific acts.
Stalking is a result crime. All statutes require a specific intent
to commit the acts in the actus reus section. They also require
some mental attitude causing the bad result, but the exact
mental attitude varies considerably among the states (836).
Slightly more than half the states require some level of
subjective fault. Most of these states require that the actor’s
purpose was to cause the bad result. About one-third of the
12. states require only objective fault. The remaining states require
no mental attitude; they provide for strict liability.
The bad result in stalking is placing stalkers’ victims in fear.
States take four different approaches to the fear caused. Most
states adopt a subjective and objectivefeartest. The second is
the subjective fear only test: the victim was actually afraid. The
third is the objective fear only test; a reasonable person would
be afraid. The fourth is the intent to instill fear test.
The Internetis a “fertile ground for stalking” (Merschman 2001,
275). This “dark side of the Web” provides cyberstalkers with
cheap and powerful tools for instilling fear in their victims—
mostly e-mail but also chat rooms and bulletin boards.
Cyberstalking is defined as “the use of the Internet, e-mail or
other electronic communications devices to stalk another person
through threatening behavior” (Mishler 2000, 117). In 1999, the
Los Angeles and Manhattan District Attorneys reported that 20
percent of its stalking victims were cyberstalked (Attorney
General 1999).
Cyberstalking reaches victims in their homes, where they feel
safest; what’s worse, stalkers can stalk from the comfort of their
homes. Cyberstalking is the use of the Internet, email, or other
electronic communication devices to stalk another person
through threatening behavior.
Personal Restraint Crimes
One of the greatest things about living in a free society is the
right to control our freedom of movement. In the eighteenth
century, they called it the right of locomotion—the right to
come and go as we please.
Kidnapping is an ancient result crime that originally involved
holding the king’s relatives for ransom. Kidnapping is the
taking and carrying away of another person with the intent to
deprive the other person of personal liberty. At common law,
kidnapping consisted of six elements: seizing; carrying away
(asportation of); and confining; by force, threat of force, fraud,
or deception; another person; with the intent to deprive the
other person of his or her liberty.
13. The heart of kidnapping actus reus consists of seizing and
carrying away (asportation of) the victim. Since at least the
eighteenth century, carrying a victim into a foreign country
where no friends or family could give her aid and comfort, and
the law couldn’t offer protection, added a terrifying dimension
to kidnapping.
In those early days, the victim had to be carried at least as far
as another county and usually across its border. Modern
interpretations have made the asportation requirement
meaningless.
Kidnapping mens rea is stated usually as the specific intent to
confine, significantly restrain, or hold victims in secret.
Kidnapping is usually divided into two degrees: simple and
aggravated.
The most common aggravatingcircumstances include kidnapping
for the purpose of:
· sexual invasions
· obtaining a hostage
· obtaining ransom
· robbing the victim
· murdering the victim
· blackmailing
· terrorizing the victim
· achieving political aims
The penalty for aggravated kidnapping is usually life
imprisonment and, until recently, occasionally even death.
False imprisonment is a lesser form of personal restraint than
kidnapping, but the heart of the crime remains depriving others
of their personal liberty. It’s a lesser offense because there’s no
asportation requirement; the deprivation of liberty is brief; and
the detention is less stressful.
Most forcible detentions or confinements, however brief, satisfy
the actus reus of false imprisonment. This doesn’t include
restraints authorized by law.
The Model Penal Code (MPC) requires the restraint to “interfere
substantially with the victim’s liberty,” but, in most state
14. statutes, any interference with another person’s liberty
is enough. Although physical force often accomplishes the
detention, it doesn’t have to; threatened force is enough. False
imprisonment is a specific-intent crime. The motive for the
detention doesn’t matter.