This weekly report from an engineering student group describes their progress on a multi-function air purifier project. The group aims to design a machine that purifies air and provides relaxation. They are working to combine four operating modes into a single circuit. The engineering team is extracting data from memory cards to understand device functions and applications, such as MP3 modules and power amplifiers. Their strong point is combining all operating modes, while their weakness is communication within the group. Next steps are to finish integrating all functions onto a printed circuit board.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 25, 2012
Name-Surname Supaus Wongchaiya
Student ID. 54261524
Group Name 361 degree
N’ Tong(2A) N’ Pui(2A) P’ Jame(2B) P’ Po(2B)
Engineering Team N’ Toey(2A) N’ Jimmy(2B) P’ Path(2B)
Members N’ Jip(2A) P’ Kang(2B) P’ Note(2B)
Product Design P’ Katall P’ Klao
Team Members P’ Earth P’ Chompu
Weekly Progress
The concept of group: The machine is used then relax and to feel comfortable.
Overview: The appliance is equipped with a power supply, amplifier,right circuit and controller in
the each section. There will be modal to determine the difference. This air purifier on the mode 4
modes. In each mode, it will keep working on the machine.
Knowledge of Engineering :We will extract data from a memory card and Need to know the
functions and applications of the device with me. For example,Memory card is connected to the
connector pin is on the increase and where it will be leased, Students learn about the
characteristics and Property of a MP3 module, power amplifier and sd card.
Figure 1. module Mp3 Figure 2.
Engineering Analysis
Strong Point
There has been much progress in this section are in the process of combining all modes of the circuit
together.
Week Point
In this section, I do not have the strength and my colleagues to communicate not clearly. But now I
have come to understand more than ever.
Next Week Job
When all the functions work normally. From then, it will be the only section on PCB.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI

2. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] April 25, 2012
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI