Hellermann Tyton Outside Serrated Cable Ties

1. 1.2
47
Cable Ties and Fixings
Cable Ties Outside Serrated
Further information and products at www.HellermannTyton.co.uk/a47
Dateofissue:January2014
Cable Ties for thin-walled bundles
• OS-Series
The contoured head needs less installation space, provides low insertion force
and offers high strength.
• Outside serrated cable tie with smooth surface to the bundle
• Tie follows the contours of the cable bundle perfectly
• Takes up less space due to curved head
• Easy insertion and high tensile strength
• For higher temperature or Limited Fire Hazard demand: Material
PA46 or PA66V0
• Easy application either manually or with a processing tool
Features and Benefits
OS-Series cable ties are used in many areas where thin-walled or soft
insulation wires and cable are being installed, e. g. automotive and
aircraft industry. OS ties made from PA66V0 material are suitable for
applications where safety regulations are required, e.g. reduction of
smoke and dangerous gases.
The new head design of
the OS Series
OS-Series
TYPE
Width
(W)
Length
(L)
Bundle Ø
min.
Bundle
Ø max. Material Colour
Pack
Cont. Article-No.
T18ROS
2.5 100.0 1.6 20.0 80 PA66HS Black (BK) 500 118-04701
2.5 100.0 1.6 20.0 80 PA66HS Natural (NA) 1.000 118-00035
T30ROS
3.4 145.0 1.6 35.0 135 PA66HS Natural (NA) 100 118-00064
3.4 145.0 1.6 35.0 135 PA66HS Black (BK) 100 118-04800
T30LOS
3.4 200.0 1.6 50.0 135 PA66HS Natural (NA) 100 118-00044
3.4 200.0 1.6 50.0 135 PA66HS Black (BK) 100 118-04900
T50SOS 4.6 150.0 1.6 35.0 225 PA66HS Black (BK) 100 118-05850
T50ROS
4.6 200.0 1.6 50.0 225 PA66HS Black (BK) 500 118-05040
4.6 200.0 1.6 50.0 225 PA66HS Natural (NA) 100 118-05059
T50MOS
4.6 245.0 1.6 66.0 225 PA66HS Black (BK) 100 118-00018
4.6 245.0 1.6 66.0 225 PA66HS Natural (NA) 100 118-00055
T50LOS 4.6 384.0 1.6 110.0 225 PA66HS Black (BK) 100 118-05900
T120ROS
7.6 385.0 5.0 105.0 535 PA66HS Black (BK) 100 118-00066
7.6 385.0 5.0 105.0 535 PA66HS Natural (NA) 100 118-00067
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available.
Application tools
please see page 302.

2. 1.1
22 Further information and products at www.HellermannTyton.co.uk/a22
Dateofissue:January2014
Material Information
Cable Ties and Fixings
Aluminium-alloy AL -40 °C to +180 °C
Natural
(NA)
• Corrosion resistant
• Antimagnetic
Chloroprene CR -20 °C to +80 °C
Black
(BK)
• Weather-resistant
• High yield strength
Ethylenterafluori-
neethylen
E/TFE -80 °C to +170 °C Blue (BU) UL94 V0
• Resistance to radioactivity
• UV- resistant, not moisture sentitive
• Good chemical resistance to:
• acids, bases, oxidizing agents
Polyacetal POM
-40 °C to +90 °C,
(+110 °C, 500 h)
Natural
(NA)
UL94 HB
• Limited brittleness sensitivity
• Flexible at low temperature
• Not moisture sensitive
• Robust on impacts
Polyamide 11 PA11
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
• Bio-plastic, derived from vegetable oil
• Strong impact resistance at low temperature
• Very low moisture absorption
• Weather-resistant
• Good chemical resistance
Polyamide 12 PA12
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
• Good chemical resistance to:
• acids, bases, oxidizing agents
• UV- resistant
Polyamide 4.6 PA46
-40 °C to +150 °C
(5000 h), +195 °C
(500 h)
Natural
(NA),
Grey
(GY)
UL94 V2
• Resistance to high temperatures
• Very moisture sensitive
• Low smoke sensitive
Polyamide 6 PA6 -40 °C to +80 °C
Black
(BK)
UL94 V2 • High yield strength
Polyamide 6.6 PA66
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK),
Natural
(NA)
UL94 V2 • High yield strength
Polyamide 6.6,
Glassfibre reinforced
PA66GF13,
PA66GF15
-40 °C to +105 °C
Black
(BK)
UL94 HB
• Good resistance to: lubricants, vehicle fuel, salt
water and many solvents
Polyamide 6.6
heat and UV sta-
bilised
PA66HSW -40 °C to +105 °C
Black
(BK)
UL94 V2
• High yield strength
• Modified elevated max. temperature
• UV-resistant
Polyamide 6.6
Heat Stabilised
PA66HS -40 °C to +105 °C
Black
(BK),
Natural
(NA)
UL94 V2
• High yield strength
• Modified elevated max. temperature
Polyamide 6.6
High Imp. Mod.,
Heat Stab.
PA66HIRHS -40 °C to +105 °C
Black
(BK)
UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated max. temperature
Polyamide 6.6
High Imp. Mod.
scan black
PA66HIR(S)
-40 °C to +80 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyamide 6.6
High Impact Mo-
dified
PA66HIR
-40 °C to +80 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Tefzel® is a registered trademark of DuPont.
General linguistic usage for cable ties made from raw material E/TFE is Tefzel®-Tie. In additon to Tefzel® from
DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
*These details are only rough guide values. They should be regarded as a material specification and are no
substitute for a suitability test. Please see our datasheets for further details.
MaterialProperties*
Shortcut
OperatingTemperature
Colour**
Flammability
MaterialMaterial Specification Overview
= Minimum Tensile Strength

3. 1.1
23Further information and products at www.HellermannTyton.co.uk/a23
Dateofissue:January2014
Material Information
Cable Ties and Fixings
MaterialProperties*
Shortcut
OperatingTemperature
Colour**
Flammability
Material
Material Specification Overview
Polyamide 6.6
high impact
modified, heat and
UV stabilised
PA66-
HIRHSW
-40 °C to +110 °C
Black
(BK)
UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
• Modified elevated max. temperature
• High yield strength, UV-resistant
Polyamide 6.6
UV Resistant
PA66W
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 V2
• High yield strength
• UV-resistant
Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C
White
(WH)
UL94 V0
• High yield strength
• Low smoke emission
Polyamide 6.6 V0
High Oxygen Index
PA66-
V0-HOI
-40 °C to +85 °C,
(+105 °C, 500 h)
White
(WH)
UL94 V0
• High yield strength
• Low smoke emissions
Polyamide 6.6
with metal particles
PA66MP
-40 °C to +85 °C,
(+105 °C, 500 h)
Blue (BU) UL94 HB • High yield strength
Polyamide 6
high impact mo-
dified
PA6HIR -40 °C to +80 °C
Black
(BK)
UL94 HB
• Limited brittleness sensitivity
• Higher flexibility at low temperature
Polyester SP -50 °C to +150 °C
Black
(BK)
• UV-resistant
• Good chemical resistance to: most acids, alkalis
and oils
Polyetheretherke-
tone
PEEK -55 °C to +240 °C
Beige
(BGE)
UL94 V0
• Resistance to radioactivity
• Not moisture sensitive
• Good chemical resistance to: acids, bases,
oxidizing agents
Polyethylene PE -40 °C to +50 °C
Black
(BK),
Grey
(GY)
UL94 HB
• Low moisture absorption
• Good chemical resistance to: most acids, alcohol
and oils
Polyolefin PO -40 °C to +90 °C
Black
(BK)
UL94 V0 • Low smoke emissions
Polypropylene PP -40 °C to +115 °C
Black
(BK),
Natural
(NA)
UL94 HB
• Floats in water
• Moderate yield strength
• Good chemical resistance to: organic acids
Polypropylene,
Ethylene-Propyle-
ne-Dien-Terpoly-
mere-rubber free
of Nitrosamine
PP, EPDM -20 °C to +95 °C
Black
(BK)
UL94 HB
• Good resistance to high temperatures
• Good chemical and abrasion resistance
Polyvinylchloride PVC -10 °C to +70 °C
Black
(BK),
Natural
(NA)
UL94 V0
• Low moisture absorption
• Good chemical resistance to: acids, ethanol, oil
Stainless Steel
SS304,
SS316
-80 °C to +538 °C
Natural
(NA)
• Corrosion resistant
• Antimagnetic
Thermoplastic
Polyurethane
TPU -40 °C to +85 °C
Black
(BK)
UL94 HB
• High elastic
• Good chemical resistance to:
• acids, bases, oxidizing agents
Tefzel® is a registered trademark of DuPont.
General linguistic usage for cable ties made from raw material E/TFE is Tefzel®-Tie. In additon to Tefzel® from
DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
*These details are only rough guide values. They should be regarded as a material specification and are no
substitute for a suitability test. Please see our datasheets for further details. = Minimum Tensile Strength