Web quest
•Download as PPT, PDF•
0 likes•213 views
This document provides information about the metric system of measurement and presents tasks for learning about measuring distances using metric units. It discusses the primary metric units for length - kilometers, meters, centimeters and millimeters. It defines their relative sizes and presents word problems asking to convert between units and measure distances. The tasks focus on using charts and tables to explain distances and routes within the MIO transportation system in Cali, Colombia using kilometers, hectometers, decameters and meters.
Report
Share
Report
Share
Recommended
Perimeter area circumference
This document defines perimeter, circumference, and area of different shapes. It provides the following formulas:
Perimeter is the distance around a figure and is calculated by adding all the side lengths. Circumference is the distance around a circle and is calculated using the formula C=πd, where d is the diameter.
The area of a rectangle is calculated by multiplying its length and width (A=l×w). The area of a triangle is half the product of its base and height (A=1/2bh). The area of a circle is the product of π and the square of the radius (A=πr^2).
Lesson 2.5 measuring perimeter and circumference
This document provides information on calculating the perimeter of polygons and the circumference of circles. It defines various polygons and explains that to find the perimeter of a polygon you sum the lengths of all its sides. The document also defines key terms related to circles like diameter and radius, and provides the formulas to calculate circumference as either π times the diameter or 2π times the radius.
Plain scale and Diagonal Scale Engineering Graphics
This document discusses different types of scales used in engineering graphics for reducing or enlarging dimensions of objects to draw them accurately on a drawing sheet. It describes plain scales which use a line divided into equal units to measure two dimensions, such as meters and decimeters. It provides examples of how to construct plain scales with given reduction factors (R.F.) and measure distances on them. Diagonal scales are also introduced which allow measuring three dimensions on a single scale. Several problems are presented on constructing plain and diagonal scales meeting given criteria and measuring specific distances on them.
Christina Gasse Two page summary
Leber's congenital amaurosis (LCA) is a rare inherited retinal disease characterized by severe vision loss from birth. It is caused by mutations in genes required for normal retina development and function, disrupting the formation and function of photoreceptor cells in the retina. Symptoms include light sensitivity, eye movements, farsightedness, and abnormal or slow pupil response. It is inherited through families if both parents carry the mutated gene. The resources provided give further information on LCA and support for patients and families.
Retinoblastoma
Lo esencial por saber del retinoblastoma. Utilizado en exposición final del curso de patología, 3er año de medicina
Retinoblastoma dr vandana
Laser photocoagulation is used to destroy small tumors by burning them with a laser beam. It is used for very small tumors away from important eye structures like the macula and optic disc. Side effects can include retinal edema and detachment.
Retinoblastoma, brief overview, June 2013
This a ppt presentation which gives an introduction to Rb diagnosis and treatment in a simple, concise way.
This presentation was prepared by me to be presented for doctoral degree students, pediatric coarse at the Department of Clinical Oncology & Nuclear Medicine, Alexandria University, Egypt.
Retinoblastoma
El retinoblastoma es un tumor intraocular maligno frecuente en la infancia que se produce por mutaciones en el gen RB1. Puede presentarse de forma esporádica o hereditaria. El retinoblastoma hereditario requiere mutaciones germinales y somáticas y suele manifestarse de forma bilateral y más precoz, mientras que el esporádico solo necesita mutaciones somáticas y es más común que sea unilateral y se manifieste más tarde. El diagnóstico se realiza evaluando el fondo de ojo y mediante pruebas de imagen como ecografía y resonancia
Recommended
Perimeter area circumference
This document defines perimeter, circumference, and area of different shapes. It provides the following formulas:
Perimeter is the distance around a figure and is calculated by adding all the side lengths. Circumference is the distance around a circle and is calculated using the formula C=πd, where d is the diameter.
The area of a rectangle is calculated by multiplying its length and width (A=l×w). The area of a triangle is half the product of its base and height (A=1/2bh). The area of a circle is the product of π and the square of the radius (A=πr^2).
Lesson 2.5 measuring perimeter and circumference
This document provides information on calculating the perimeter of polygons and the circumference of circles. It defines various polygons and explains that to find the perimeter of a polygon you sum the lengths of all its sides. The document also defines key terms related to circles like diameter and radius, and provides the formulas to calculate circumference as either π times the diameter or 2π times the radius.
Plain scale and Diagonal Scale Engineering Graphics
This document discusses different types of scales used in engineering graphics for reducing or enlarging dimensions of objects to draw them accurately on a drawing sheet. It describes plain scales which use a line divided into equal units to measure two dimensions, such as meters and decimeters. It provides examples of how to construct plain scales with given reduction factors (R.F.) and measure distances on them. Diagonal scales are also introduced which allow measuring three dimensions on a single scale. Several problems are presented on constructing plain and diagonal scales meeting given criteria and measuring specific distances on them.
Christina Gasse Two page summary
Leber's congenital amaurosis (LCA) is a rare inherited retinal disease characterized by severe vision loss from birth. It is caused by mutations in genes required for normal retina development and function, disrupting the formation and function of photoreceptor cells in the retina. Symptoms include light sensitivity, eye movements, farsightedness, and abnormal or slow pupil response. It is inherited through families if both parents carry the mutated gene. The resources provided give further information on LCA and support for patients and families.
Retinoblastoma
Lo esencial por saber del retinoblastoma. Utilizado en exposición final del curso de patología, 3er año de medicina
Retinoblastoma dr vandana
Laser photocoagulation is used to destroy small tumors by burning them with a laser beam. It is used for very small tumors away from important eye structures like the macula and optic disc. Side effects can include retinal edema and detachment.
Retinoblastoma, brief overview, June 2013
This a ppt presentation which gives an introduction to Rb diagnosis and treatment in a simple, concise way.
This presentation was prepared by me to be presented for doctoral degree students, pediatric coarse at the Department of Clinical Oncology & Nuclear Medicine, Alexandria University, Egypt.
Retinoblastoma
El retinoblastoma es un tumor intraocular maligno frecuente en la infancia que se produce por mutaciones en el gen RB1. Puede presentarse de forma esporádica o hereditaria. El retinoblastoma hereditario requiere mutaciones germinales y somáticas y suele manifestarse de forma bilateral y más precoz, mientras que el esporádico solo necesita mutaciones somáticas y es más común que sea unilateral y se manifieste más tarde. El diagnóstico se realiza evaluando el fondo de ojo y mediante pruebas de imagen como ecografía y resonancia
Webquest
The document discusses units of measurement for length including the metric and English systems. It provides conversion factors between kilometers, meters, centimeters, millimeters, decimeters, and hectometers. It then presents a series of tasks involving calculating distances and conversions between locations in Colombia using these metric length units.
Metric system conversions 2010
Here are the steps to convert 5,720 km to cm:
1. Write 5,720 km with the correct prefix (kilo) above it: 5,720 k
2. Move the decimal place the correct number of spaces to the right (from k to c): 5,720,000
3. Write the correct prefix (centi) above the final number: 5,720,000 cm
So, 5,720 km = 5,720,000 cm
To convert 23 mg to dag:
1. Write 23 mg with the correct prefix (milli) above it: 23 m
2. Move the decimal place the correct number of spaces to the left (from m to da):
Performing mensuration-and-calculations-common
This document provides instructions for a module on performing mensuration and calculations. It includes an introduction explaining mensuration, units of measurement, and estimating areas. Examples are provided to illustrate measuring lengths and converting between units. Instructions are given for constructing three-dimensional solids using nets. The document concludes with examples of converting between metric and imperial units.
Measuring Lengths PPT.pptx
This document discusses measuring length using both the metric and English measurement systems. It provides examples of converting between units like centimeters to meters, inches to feet, and miles to kilometers. The learner will be able to approximate lengths of everyday objects using appropriate units and convert between different units of length within and across systems. Practice problems are provided to convert between units and compare lengths using symbols like <, >, and =.
Relief measurement
Measurement is an important real-life skill that involves determining distances, weights, times, temperatures, and shapes using appropriate tools. This year's work will focus on measuring distances in meters and its subunits (centimeters and millimeters), weights in grams, and converting between different units of length. Key tools include rulers, tape measures, scales, and thermometers. Students will practice measuring lengths, widths, perimeters, areas, volumes, and surface areas of 2D and 3D shapes.
System of Measurement.pptx
A system of measurement establishes standardized units that can be used to quantify anything measurable. The English system uses feet and yards based on human body measurements, while the metric system uses a decimal system of millimeters, centimeters, decimeters and meters. Both systems define the equivalents between their units, and provide conversions between English and metric units.
Lesson 2.1 measurements
1. The document discusses measurements and the metric system. It defines common metric prefixes and their values.
2. Ancient people had ways of measuring things around them, while modern standards developed over time.
3. The metric system is now the generally accepted system of units internationally, known as the International System of Units (SI).
Sec. 3.2
Students will learn how to convert between millimeters, centimeters, and meters using decimals. The document provides examples of converting metric measurements of length to decimals in centimeters or meters. Practice problems with images provide lengths to convert and round to the nearest hundredth or tenth.
Sec. 3.2
Students will learn how to use decimals to express common metric measurements of length including millimeters, centimeters and meters. Key metric conversions are provided, such as 1 mm = 0.1 cm and 1 m = 100 cm. Students are then given examples of expressing lengths in decimals of centimeters and meters, and finding lengths to the nearest tenth or hundredth of a unit.
Lesson 80 area of a rectangle and a square
This lesson plan teaches students about the area of rectangles and squares. It begins with reviewing multiplying whole numbers and measuring length. Students are shown examples of rectangles and squares and asked to identify the shapes and number of sides. Formulas for calculating the area of a rectangle (length x width) and square (side x side) are then derived. Students practice finding the areas of example figures using the formulas and measuring given lengths and widths. They also complete worksheets measuring and calculating the areas of real-world objects. The lesson ends with students solving additional area problems independently.
TLE8-Q3-WEEK5-PPT.pptx
The document provides information about measurement tools and systems of measurement. It defines various drawing and measuring tools like a compass, triangle, T-square, protractor, ruler, tape measure, scale, and divider. It also explains the metric and English systems of measurement, including linear equivalents and conversion tables between the two systems. Examples are given to demonstrate how to convert between millimeters, centimeters, meters, inches, feet, and yards.
Sec. 2.1
This document discusses measuring length using customary and metric units. It provides examples of common units like inches, feet, yards, centimeters and meters. It also lists common measuring tools and their scales. Benchmarks for estimating lengths are given, like using a finger width for centimeters. Examples are provided for choosing an appropriate unit and tool based on the object's size. The learning target is stated as accurately measuring and estimating lengths using customary and metric units and benchmarks.
PS_INTRO.pptx
This document provides an introduction to physical science for students in the Bangsamoro Autonomous Region in Muslim Mindanao, Philippines. It outlines what students will learn over the course of the year, including chemistry, physics, and space science. It explains that physical science is the study of matter and energy in the universe. The introduction emphasizes the importance of learning fundamentals like the scientific method and metric system for understanding how discoveries in science are made. Students will apply these concepts to distinguish between pure and applied science.
Shape & Space
The document discusses teaching concepts related to shape and space for Year 4, including:
1. Two-dimensional shapes and calculating their perimeter and area, such as squares, rectangles, and triangles.
2. Three-dimensional shapes like cubes and cuboids, and calculating their volume.
3. Key formulas for calculating perimeter, area, and volume of different shapes. Examples of problems are provided to help teach these concepts.
Metric conversion lab
The document discusses metric system conversions and provides examples of converting between metric and US customary units. It defines the metric system and notes that most countries use it as the standard, while the US, Burma and Liberia still use other systems. Examples are given for converting between units of length, volume, mass and temperature. Formulas and rounding rules are explained for making accurate conversions between systems.
Physical Quantities.pptx
This document outlines a physics lesson plan on measurement of physical quantities. It will discuss physical quantities and examples, the international system of units (SI units), and prefixes. Students will learn to define physical quantities, describe the SI, apply prefixes to interpret units, and interconvert smaller and larger units. The lesson will take 40 minutes and include activities on the whiteboard, projector, and homework assignments involving unit conversions.
Lesson 2 - Measuring Distance Using Standard Units.ppt
This document provides information about measuring distance using standard metric units. It discusses why measuring distance is important, the two main measurement systems, and focuses on the International System of Units (SI or metric system). Key points include that the metric system uses multiples of ten as prefixes for units of measurement. The base units for length, mass, time and other quantities are defined. Examples show how to use the "ladder method" to convert between metric units like centimeters to millimeters. Students complete practice problems converting between units of distance.
Lab one metric conversions
The document provides information about metric conversions and the metric system. It includes conversion charts for common metric units like centimeters, meters, kilometers, liters, grams, and Celsius. It presents sample conversion problems and shows the work to convert between units like centimeters to inches, meters to feet, Celsius to Fahrenheit, ounces to grams, and more. Students are instructed to complete a set of these conversion problems using the provided charts and formulas. Rounding rules are also outlined. The goal is to practice common metric conversions and get comfortable with the metric system.
Intro to standard metric measurement
The document provides an introduction to measurement systems, explaining the key differences between the standard (customary) and metric systems, as well as giving examples of how to read a ruler and convert between the systems. It outlines the steps for using both the standard and metric rulers and provides examples of converting between the units of each system.
Maths A - Chapter 4
This document discusses geometry concepts related to length, area, and volume. It includes examples of calculating perimeters of different shapes and composite figures. Conversions between different units of length are also covered. The document contains instructions for an origami investigation involving folding a square piece of paper into geometric shapes.
Circulation in cells ok
The document discusses different types of transport across cell membranes. There are two main types: passive transport, which requires no energy and involves molecules moving from high to low concentration areas via diffusion or osmosis; and active transport, which requires energy and moves molecules against their concentration gradient. Passive transport includes diffusion of molecules and osmosis of water moving through membrane channels and proteins from high to low concentration areas. Active transport transports molecules from low to high concentration areas using energy.
Unit 8 grammar ws ii
This document discusses the order of adjectives in English. It states that opinion adjectives come before factual adjectives when describing a noun. A chart shows the typical order of different types of adjectives: opinion, size, color, shape, nationality, and material. When using two color adjectives together, they are joined by "and". For three adjectives, a comma is used after the first and "and" is used between the last two if they follow a linking verb. Examples are provided to illustrate these rules.
More Related Content
Similar to Web quest
Webquest
The document discusses units of measurement for length including the metric and English systems. It provides conversion factors between kilometers, meters, centimeters, millimeters, decimeters, and hectometers. It then presents a series of tasks involving calculating distances and conversions between locations in Colombia using these metric length units.
Metric system conversions 2010
Here are the steps to convert 5,720 km to cm:
1. Write 5,720 km with the correct prefix (kilo) above it: 5,720 k
2. Move the decimal place the correct number of spaces to the right (from k to c): 5,720,000
3. Write the correct prefix (centi) above the final number: 5,720,000 cm
So, 5,720 km = 5,720,000 cm
To convert 23 mg to dag:
1. Write 23 mg with the correct prefix (milli) above it: 23 m
2. Move the decimal place the correct number of spaces to the left (from m to da):
Performing mensuration-and-calculations-common
This document provides instructions for a module on performing mensuration and calculations. It includes an introduction explaining mensuration, units of measurement, and estimating areas. Examples are provided to illustrate measuring lengths and converting between units. Instructions are given for constructing three-dimensional solids using nets. The document concludes with examples of converting between metric and imperial units.
Measuring Lengths PPT.pptx
This document discusses measuring length using both the metric and English measurement systems. It provides examples of converting between units like centimeters to meters, inches to feet, and miles to kilometers. The learner will be able to approximate lengths of everyday objects using appropriate units and convert between different units of length within and across systems. Practice problems are provided to convert between units and compare lengths using symbols like <, >, and =.
Relief measurement
Measurement is an important real-life skill that involves determining distances, weights, times, temperatures, and shapes using appropriate tools. This year's work will focus on measuring distances in meters and its subunits (centimeters and millimeters), weights in grams, and converting between different units of length. Key tools include rulers, tape measures, scales, and thermometers. Students will practice measuring lengths, widths, perimeters, areas, volumes, and surface areas of 2D and 3D shapes.
System of Measurement.pptx
A system of measurement establishes standardized units that can be used to quantify anything measurable. The English system uses feet and yards based on human body measurements, while the metric system uses a decimal system of millimeters, centimeters, decimeters and meters. Both systems define the equivalents between their units, and provide conversions between English and metric units.
Lesson 2.1 measurements
1. The document discusses measurements and the metric system. It defines common metric prefixes and their values.
2. Ancient people had ways of measuring things around them, while modern standards developed over time.
3. The metric system is now the generally accepted system of units internationally, known as the International System of Units (SI).
Sec. 3.2
Students will learn how to convert between millimeters, centimeters, and meters using decimals. The document provides examples of converting metric measurements of length to decimals in centimeters or meters. Practice problems with images provide lengths to convert and round to the nearest hundredth or tenth.
Sec. 3.2
Students will learn how to use decimals to express common metric measurements of length including millimeters, centimeters and meters. Key metric conversions are provided, such as 1 mm = 0.1 cm and 1 m = 100 cm. Students are then given examples of expressing lengths in decimals of centimeters and meters, and finding lengths to the nearest tenth or hundredth of a unit.
Lesson 80 area of a rectangle and a square
This lesson plan teaches students about the area of rectangles and squares. It begins with reviewing multiplying whole numbers and measuring length. Students are shown examples of rectangles and squares and asked to identify the shapes and number of sides. Formulas for calculating the area of a rectangle (length x width) and square (side x side) are then derived. Students practice finding the areas of example figures using the formulas and measuring given lengths and widths. They also complete worksheets measuring and calculating the areas of real-world objects. The lesson ends with students solving additional area problems independently.
TLE8-Q3-WEEK5-PPT.pptx
The document provides information about measurement tools and systems of measurement. It defines various drawing and measuring tools like a compass, triangle, T-square, protractor, ruler, tape measure, scale, and divider. It also explains the metric and English systems of measurement, including linear equivalents and conversion tables between the two systems. Examples are given to demonstrate how to convert between millimeters, centimeters, meters, inches, feet, and yards.
Sec. 2.1
This document discusses measuring length using customary and metric units. It provides examples of common units like inches, feet, yards, centimeters and meters. It also lists common measuring tools and their scales. Benchmarks for estimating lengths are given, like using a finger width for centimeters. Examples are provided for choosing an appropriate unit and tool based on the object's size. The learning target is stated as accurately measuring and estimating lengths using customary and metric units and benchmarks.
PS_INTRO.pptx
This document provides an introduction to physical science for students in the Bangsamoro Autonomous Region in Muslim Mindanao, Philippines. It outlines what students will learn over the course of the year, including chemistry, physics, and space science. It explains that physical science is the study of matter and energy in the universe. The introduction emphasizes the importance of learning fundamentals like the scientific method and metric system for understanding how discoveries in science are made. Students will apply these concepts to distinguish between pure and applied science.
Shape & Space
The document discusses teaching concepts related to shape and space for Year 4, including:
1. Two-dimensional shapes and calculating their perimeter and area, such as squares, rectangles, and triangles.
2. Three-dimensional shapes like cubes and cuboids, and calculating their volume.
3. Key formulas for calculating perimeter, area, and volume of different shapes. Examples of problems are provided to help teach these concepts.
Metric conversion lab
The document discusses metric system conversions and provides examples of converting between metric and US customary units. It defines the metric system and notes that most countries use it as the standard, while the US, Burma and Liberia still use other systems. Examples are given for converting between units of length, volume, mass and temperature. Formulas and rounding rules are explained for making accurate conversions between systems.
Physical Quantities.pptx
This document outlines a physics lesson plan on measurement of physical quantities. It will discuss physical quantities and examples, the international system of units (SI units), and prefixes. Students will learn to define physical quantities, describe the SI, apply prefixes to interpret units, and interconvert smaller and larger units. The lesson will take 40 minutes and include activities on the whiteboard, projector, and homework assignments involving unit conversions.
Lesson 2 - Measuring Distance Using Standard Units.ppt
This document provides information about measuring distance using standard metric units. It discusses why measuring distance is important, the two main measurement systems, and focuses on the International System of Units (SI or metric system). Key points include that the metric system uses multiples of ten as prefixes for units of measurement. The base units for length, mass, time and other quantities are defined. Examples show how to use the "ladder method" to convert between metric units like centimeters to millimeters. Students complete practice problems converting between units of distance.
Lab one metric conversions
The document provides information about metric conversions and the metric system. It includes conversion charts for common metric units like centimeters, meters, kilometers, liters, grams, and Celsius. It presents sample conversion problems and shows the work to convert between units like centimeters to inches, meters to feet, Celsius to Fahrenheit, ounces to grams, and more. Students are instructed to complete a set of these conversion problems using the provided charts and formulas. Rounding rules are also outlined. The goal is to practice common metric conversions and get comfortable with the metric system.
Intro to standard metric measurement
The document provides an introduction to measurement systems, explaining the key differences between the standard (customary) and metric systems, as well as giving examples of how to read a ruler and convert between the systems. It outlines the steps for using both the standard and metric rulers and provides examples of converting between the units of each system.
Maths A - Chapter 4
This document discusses geometry concepts related to length, area, and volume. It includes examples of calculating perimeters of different shapes and composite figures. Conversions between different units of length are also covered. The document contains instructions for an origami investigation involving folding a square piece of paper into geometric shapes.
Similar to Web quest (20)
Lesson 2 - Measuring Distance Using Standard Units.ppt
Lesson 2 - Measuring Distance Using Standard Units.ppt
More from watler
Circulation in cells ok
The document discusses different types of transport across cell membranes. There are two main types: passive transport, which requires no energy and involves molecules moving from high to low concentration areas via diffusion or osmosis; and active transport, which requires energy and moves molecules against their concentration gradient. Passive transport includes diffusion of molecules and osmosis of water moving through membrane channels and proteins from high to low concentration areas. Active transport transports molecules from low to high concentration areas using energy.
Unit 8 grammar ws ii
This document discusses the order of adjectives in English. It states that opinion adjectives come before factual adjectives when describing a noun. A chart shows the typical order of different types of adjectives: opinion, size, color, shape, nationality, and material. When using two color adjectives together, they are joined by "and". For three adjectives, a comma is used after the first and "and" is used between the last two if they follow a linking verb. Examples are provided to illustrate these rules.
Unit 8 grammar ws i
The document provides information about possessive pronouns such as mine, yours, his, hers, its, ours, yours, and theirs. It explains that possessive pronouns are used to describe possession and do not need a noun after them, unlike possessive adjectives such as my, your, his, her, its, our, your, and their. The document also notes that the possessive forms her's and your's do not exist and provides practice exercises for students to reinforce their understanding of possessive pronouns.
Unit 8 project
The document provides instructions for a student to create an online crossword puzzle using vocabulary words from Unit 8 as part of a class assignment. It directs the student to use eclipsecrossword.com to build the puzzle and include at least 15 vocabulary words, with correct spelling and clear definitions. Teachers will evaluate the puzzles based on correct spelling, creativity, clear definitions, and including at least 15 words.
Making and responding to suggestions (2)
This English oral lesson document provides objectives, language focuses, examples, exercises and activities around making and responding to suggestions. The objectives are to give oral fluency practice and practice in making and responding to suggestions. Language focuses include expressions for making suggestions like "Why don't you..." and responding like "Yes, that's a good idea." Examples demonstrate using these expressions to give suggestions to solve problems or plan a birthday party. Exercises and pair work activities provide practice making and responding to suggestions for different situations.
Vocab workshop
You are preparing for a trip and need to remember important items. The document provides vocabulary exercises to help with a unit on traveling, including a quiz game online and workbook activities to build vocabulary skills related to planning a vacation.
Webquest part 3-ok
This document introduces a webquest about time zones and timelines. It includes 5 tasks: 1) reading about time zones and answering questions, 2) displaying clocks to show different times in various zones, 3) taking notes on a website about time zones, 4) answering questions from slides using a time zone map, and 5) making an online timeline about the history of time zones after researching additional sites. The goal is for students to learn about how time zones work and how they have evolved over time.
Runaway project g
This document outlines the final project for an English class, which involves students creating a parody video of the TV show "Project Runway". Students will be divided into teams with roles like designer, model, and judge. Each designer must choose a different decade and research fashion from that era. The teams must write a script, record their video, and will be assessed on their use of English vocabulary, teamwork, creativity and other criteria.
Lesson 11 b
The document provides instructions for an English lesson that focuses on building vocabulary related to physical features like hair styles, facial hair, and accessories. It directs students to match pictures of features to vocabulary words and practice grammar through exercises on a Cambridge website. A table scores student performance on a series of assignments.
Lesson 11 a
This document provides instruction on describing people through grammar structures. It discusses prior knowledge, describes people using structures like "have got", and includes exercises for practice in pairs and speaking to reinforce learning grammar and vocabulary for describing people.
Runaway project j
This document outlines the final project for an English class, which involves students creating a parody video of the TV show "Project Runway". Students will be divided into teams to take on roles like designer, model, or judge. Each designer must choose a different decade and research fashion styles from that era. The teams must write a script, record their video, and will be assessed on their use of English, teamwork, creativity and other criteria.
Body organization
The document discusses the different levels of organization in the human body. It begins by explaining there are cells, tissues, organs, and organ systems. It then focuses on the four main tissue types - epithelial, connective, muscular and nervous. Epithelial tissue covers surfaces and lines cavities. Connective tissue connects organs and provides structure. Muscular tissue causes movement. Nervous tissue responds to stimuli and transmits signals. Organs are composed of tissues working together to perform functions. The major organ systems and their functions are also listed.
Unit 10 projec tok
This document provides instructions for students to create an animated flipbook in groups of four about learning English using technology. It explains what an animated flipbook is and includes topics they should cover in their booklet, such as forms of electronic communication, advantages and disadvantages of bulletin boards, and comparative adjectives. Students are directed to include their names on each article. The document also provides various website links and tutorials to help students learn how to create their animated flipbooks using free online software and upload them to their blogs. It concludes with an evaluation checklist for their writing and inclusion of extra information.
Microscope
The document provides an introduction and instructions for using a microscope, including its main parts like the eyepiece, body tube, revolving nosepiece, objective lens, stage, stage clips, coarse and fine focus knobs, diaphragm, light, and base. It explains how to properly carry, clean, store, and focus the microscope, placing the slide on the stage and using the lowest objective lens setting before finely focusing with the other lenses.
Oral exam guidelines
The oral exam will evaluate students' knowledge, presentation skills, and ability to communicate through couple presentations. Students will be assigned one of five options: presenting a solution to a new problem, describing relevant experience and training, role-playing a situation from class, critiquing a video scenario, or making a phone call in English. Students should prepare by completing all assignments and exercises, and should listen carefully to questions during the exam.
Unit 8 projec tok
The document provides instructions for a student to create an online crossword puzzle for their English Level II class. It specifies that the puzzle should include at least 15 vocabulary words from Unit 8 and should be created on one of two recommended crossword-making websites. It also lists evaluation criteria of correct spelling, creativity, clear definitions, and including at least 15 words. Students are encouraged to be creative and can add pictures.
Eap 1
This document discusses reading skills and provides information about cognates. It defines cognates as words in two languages that have a common origin and similar meaning and spelling. The document notes that cognates can help with reading comprehension but that meanings may differ over time. Examples of cognates like objective/objective and difficult/dificil are provided, as well as a warning about false cognates that look similar but mean different things.
Lesson 7 b 2012 2
Lesson 7A- Review discusses preparing for a trip by reviewing prior knowledge, vocabulary, and grammar related to giving advice and suggestions. Students are asked to imagine an item they would not leave behind for a trip and complete exercises practicing vacation vocabulary, identifying items being packed, and distinguishing between using "should" and "could" to give advice or make suggestions. The document assigns workbook exercises as homework to reinforce lesson concepts.
Four square writing
Four Square Writing is a graphic organizer method for teaching writing skills across grade levels and subjects. It involves folding a sheet of paper into four squares and writing a topic sentence in the center square. Supporting sentences are written in the other three squares to provide reasons, examples, or explanations for the topic sentence. The four square method can be used to generate paragraphs and full essays through a step-by-step process of adding details, examples, and transitions between ideas in each square. The goal is to help students develop well-organized writing with a clear thesis and supporting body paragraphs.
More from watler (20)
Recently uploaded
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
MySQL InnoDB Storage Engine: Deep Dive - Mydbops
This presentation, titled "MySQL - InnoDB" and delivered by Mayank Prasad at the Mydbops Open Source Database Meetup 16 on June 8th, 2024, covers dynamic configuration of REDO logs and instant ADD/DROP columns in InnoDB.
This presentation dives deep into the world of InnoDB, exploring two ground-breaking features introduced in MySQL 8.0:
• Dynamic Configuration of REDO Logs: Enhance your database's performance and flexibility with on-the-fly adjustments to REDO log capacity. Unleash the power of the snake metaphor to visualize how InnoDB manages REDO log files.
• Instant ADD/DROP Columns: Say goodbye to costly table rebuilds! This presentation unveils how InnoDB now enables seamless addition and removal of columns without compromising data integrity or incurring downtime.
Key Learnings:
• Grasp the concept of REDO logs and their significance in InnoDB's transaction management.
• Discover the advantages of dynamic REDO log configuration and how to leverage it for optimal performance.
• Understand the inner workings of instant ADD/DROP columns and their impact on database operations.
• Gain valuable insights into the row versioning mechanism that empowers instant column modifications.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Must Know Postgres Extension for DBA and Developer during Migration
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
ScyllaDB monitoring provides a lot of useful information. But sometimes it’s not easy to find the root of the problem if something is wrong or even estimate the remaining capacity by the load on the cluster. This talk shares our team's practical tips on: 1) How to find the root of the problem by metrics if ScyllaDB is slow 2) How to interpret the load and plan capacity for the future 3) Compaction strategies and how to choose the right one 4) Important metrics which aren’t available in the default monitoring setup.
A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
Introducing BoxLang : A new JVM language for productivity and modularity!
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
Recently uploaded (20)
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Must Know Postgres Extension for DBA and Developer during Migration
Must Know Postgres Extension for DBA and Developer during Migration
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Introducing BoxLang : A new JVM language for productivity and modularity!
Introducing BoxLang : A new JVM language for productivity and modularity!
Web quest
- 2. •Units of measurement were among the earliest tools invented by humans. Primitive societies needed rudimentary measures for numerous tasks such as: constructing dwellings of an appropriate size and shape, fashioning clothing, or raw materials. •Length is a measurement of distance or dimension. The two main systems to measure length are the metric and the English system. •We need frequent and repeated opportunities to practice and apply measurement.
- 4. 10 millimeters (mm) = 1 centimeter (cm) 10 centimeters(cm) = 1 decimeter (dm) = 100 millimeters (mm) 10 decimeters (dm)= 1 meter (m)= 1000 millimeters (mm) 10 meters (m) = decameter (dam) 10 decameters( dam)=1 hectometer (hm) =100 meters (m) 10 hectometers=1 kilometer(km) = 1000 meters (m)
- 5. Task 1. Find the MIO system total layout in km, hm, dam and m. Justify your answers.
- 6. Task 2. Help a friend from Bogota to learn about the MIO . Make chart to explain the measurement of the pre-trunk in m, dam, hm. Make a chart to explain your answers. Remember the pre-trunk has 78 km.
- 7. Task 3. Your new friend is at school with you, and he needs to go to Cosmocentro. Help him find two different options (MIO routes) to get there. Remember to explain him the number of the different routes he can take in each case. Which is the best route and why? Explain your answer (2 routes) in a complete and complex way.
- 8. Task 4. Your new friend from Bogota made many trips around the main trunk. He needs to complete the following chart to find out the distance he traveled: TRIPS DISTANCES (IN km) 2 4 5 8 392 13
- 9. Remember to use charts, summary tables, or other organizing structures to justify your answers. You can visit the following web sites to complete your work: • www.mio.com.co • http://www.metrocali.gov.co/ • http://www.studyzone.org/testprep/math4/d/metricl.cfm
- 11. Task 5. Think and answer the following questions: When are km, m, cm, dam used? Example. _________________ are used for very long distances. Choose the appropriate units to measure: a) the length of objects such as eraser, pencil or book, b) the length and height of your teacher’s table, c) the length and width of your classroom, d) the heights of your friends,
- 12. Remember….. Your work must be very neat, complete, attractive, good written introduction. Imagination and creativity must evident. You must print your project and hand it in on time.