A geological resistivity survey helps landowners determine underground water quantity and quality before drilling an expensive well. The survey uses modern technology to generate electrical currents and detect subsurface conductivity, identifying potential high-yield bore locations. A reputable survey company will take soil samples for water quality testing, provide professional analysis and recommendations, and have over 50 years of experience prospecting for water around the world. While some survey lines may not indicate good bore sites, multiple lines are analyzed to maximize the chances of finding productive locations. Contact information is provided for those seeking a survey.

1. Water Exploration
When you want to be sure about underground
water quantity and quality of your properties
The Survey is more helpful then Google
For search water in your properties!!

2. The Nature of Underground Water
Most fresh groundwater occurs in the pore spaces
of sedimentary rocks and sediments. It has the
ability to flow laterally through these pore spaces
and establish a “water table” that is generally
horizontal or slightly sloping,

3. Why landowners need a geological resistivity survey?
Drilling for underground water is going costly day by day. It is a major
investment that many landowners are hesitant to make without
professional consultation. They want to be sure that the well is drilled
in a location where it will produce water of adequate quantity and
quality. This is why many people hire a geological resistivity survey.
Original picture of a survey for AL TARIQ CONTRACTING (Pvt Ltd) (LLC)
The company need huge amount of water for LPG and other kind of
tanks of hydro tests.

4. No need to be thirstier for water!!
How we do that’s?

5. HOW WE DO THAT’S
By geophysical prospecting instrument, modern technology for find
underground water quantity and quality.
Original survey picture of Jaffrani Steel Mills Karachi

6. Professional back support
An institutes with more than 50 years’ experience in water
technology, working institutes, location in China, Germany, USA,
Australia and Hong Kong. We share survey data with the team in
case understanding problems for any of projects.

7. How the instruments find underground water
By generate electrical currents in the ground, whose secondary
magnetic fields are in turn detected at the planetary surface. In this
way, the electrical conductivity of the subsurface can be
reconstructed; the device radars have been very useful in imaging
through ice and through very dry lands and low-density rocks. The
way of electromagnetic induction methods are widely used in
groundwater exploration.

8. Soil testing by 3rd
party lab
We take soil of each project from to top surface and send to
testing to a 3rd party laboratory for show water quality result
in our report.
The method helps us and our client to be sure water salty test
and all our recommendation will be as per water quality
requirements of projects.
Few simple images and water production data of
Geological Resistivity Survey Report of project

9. Line 2 Signals image, find one curve
Line 2 Process Image, find one good location
FW2517 unit 3, Line 2 Point at 5.05/meter Point # 2 Best value # 1/BEST
Bore depth Bit Casing Production Bit Casing Production
170/meter 7.5/inch 5/inch 20000/liter 12/inch 8/inch 30000/liter
270/meter 12/inch 8/inch 45000/liter 16/inch 12/inch 55000/liter

10. Line 3 Signals image, find two curves
Line 3 Process Image, find two good location
FW2517 unit 3, Line 6 Point at 7 /meter Point # 5 Best value # 6
Bore depth Bit Casing Production Bit Casing Production
160/meter 7.5/inch 5/inch 15000/liter 10/inch 7/inch 25000/liter
FW2517 unit 3, Line 6 Point at 11 /meter Point # 6 Best value # 3
Bore depth Bit Casing Production Bit Casing Production
170.meter 7.5/inch 5/inch 20000/liter 10/inch 7/inch 30000/liter

11. Line 7 Signals image, no any curves
Line 7 Process Image, No any good location
Note:
 The line not recommend for any of bore point,
However water table is good, but the projects are more 7/point good then the
line location
 Production of raw water is basic of 24/hours a day
 Above only 3 result are shown of a project, each project result we provide
for 5~6/line, and mostly we find near to 5~6/ good location of each project

12. The Klong Chao Waterfall of Koh Kood,
In Thailand, is an amazing water fact!!
Thailand's tropical climate is characterised by high temperatures and humidity
throughout the year. April and May feature the hottest temperatures while the
weather in June sees the monsoon pattern bringing heavy rain through to
October. November to February is the best time to visit Thailand as the weather is
relatively mild and sunny with humidity levels dropping and temperatures cooling
from the North East breeze. Thailand's average climate ranges from 30°C at its
lowest in December and up to 36°C from January to April. Rainfall generally
averages from 5mm in December to 300mm in September in central parts of
Thailand.

13. Don’t lose your hope because the Klong Chao Waterfall in an island,
nearest Glaciers maybe near to 5000/KM of the location, but water
continually fall in 24/hours and 365/days
You just need to know a good location for well/bore
Please contact Pakistan water treatment “technical team” for more
details and plan for your project survey.
Contact Person: Mr. Suleman Mandra (Technical Team Head)
Cellphone/whatapp: +923223344402. +923362477983
Office phones: +922132272007 & 8
Email: info@pakistaniwater.com
Web: www.pakistaniwater.com
Like us at social media: https://web.facebook.com/Pakistani.water/
Office address:
1508/B, Saima Trade Tower, I I Chundrigar Road, Karachi.
Workshop addeess:
Workshop: Main Suparco Road, Mawach Goth, Baldia Town, Karachi,

14. Our Cooperative Client

15. For more details about our cooperative and individual client
list, please contact with us
Please consider the environment before printing