The document provides an operating manual for a Scene Controller device that can control Z-Wave devices and activate scenes wirelessly through a Z-Wave gateway. The Scene Controller uses a rechargeable battery, supports inclusion and exclusion from Z-Wave networks, and can control other devices through association groups activated by button presses of different lengths. It also describes resetting, low battery alerts, firmware updates, and testing network range functionality.
The controller ZRC-90 Remotec scenes can execute scenes in your Z-Wave network. When one of the ZRC-90 buttons is pressed, your central controller or box Z-Wave home automation will receive a signal that it can use to trigger scripts.
The controller ZRC-90 Remotec scenes can execute scenes in your Z-Wave network. When one of the ZRC-90 buttons is pressed, your central controller or box Z-Wave home automation will receive a signal that it can use to trigger scripts.
Manual del dispositivo regulador oculto Z-Wave de Widom que permite variar la intensidad de una lámpara, o la velocidad de un motor (como por ejemplo un ventilador).
Manual del dispositivo regulador oculto Z-Wave de Widom que permite variar la intensidad de una lámpara, o la velocidad de un motor (como por ejemplo un ventilador).
WiDomSmartTE Dimmer is an "in-wall device" that controls the luminosity level and/or fan speed. A universal device that controls the light intensity of all types of dimmable lights, including LED lamps and energy-saving lamps. The Smart TE Dimmer includes the ON / OFF control option of non-dimmable loads
Optimal protection for critical loads. To limit starting currents on problematic devices, such as energy saving bulbs and fluorescent bulbs. Problematic devices, such as electronic ballasts, energy-saving light bulbs, incandescent bulbs, LED drivers, and switching power supplies, consume a lot of power during ignition due to the multiplication of current. nominal and can therefore destroy the switching relay.
With the ESB200 current limiter, the high current that can occur when switching on electronic devices is limited to a harmless value. It is also possible to limit the inrush current of incandescent lamps to give them a longer life. A protection fuse is also integrated. This starting current limiter can be plugged directly into the power supply circuit for loads up to 200 VA. This compact device can be installed very easily in junction and recessed boxes or in lamp boxes, for example. The device is easily installed in series with the load
wiDom Multi Sensor Room Controller MSRC Manual ENDomotica daVinci
WiDom Multi Sensor Room Controller is a Z-Plus Static controller that integrates a Luminance, Humidity, Temperature and Loudness sensor in the same box
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
1. 1. Product layout
OPERATING MANUAL
SCENE CONTROLLER
HKZW-SCN01-V1.0
The Scene Controller is a slave product that is wireless,portable and
rechargeable . It can control a Z-Wave device, such as smart plug, smart
dimmerthrough a Z-Wave gateway. You can also activate a scene like
sleep scene,moviescene and entertainment scene with it.
The features list:
(1) Z-Wave Plus certifiedfor wide compatibility(500 serialsproduct).
(2) Supportremote control anywhere and anytime.
(3) The battery is rechargeable.
(4) The battery will run for half a year per singlecharging.
(5) Supportlow battery alarm with a buzzer.
(6) Supportcommunication failure alarm with a buzzer.
(7) Supportfirmware OTA.
Ⅰ. GENERAL INFORMATION ABOUT SCENE CONTROLLER
Radio protocol:
Radio frequency: 868.42MHz (EU) 908.42MHz (US)
921.42MHz (AU)
Range:
Dimensions 50*50*16mm
36mA
3uA
Power supply:
2. Specifications
Single LIR2450 3.6V Battery
Storage environment:
Operational temperature:
More than 100m outdoors
About 30m indoors (depending
on building materials)
Working current:
Standby current:
-10~50℃ 0%~85%
0~40℃
Z-Wave
Z-Button/Main Button
LED
LED
Micro USB port
Ⅱ.INSTALLATION
Open the cover:
Open the cover, as the figure below shows.
Insert your battery:
Insert your battery and close the cover, as the figure below shows.
Ⅲ. Z-WAVE NETWORK INCLUSION
Scene Controller can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
Included as a non-secure device
(1) Insert the LIR2450 battery.
(2) Set the Z-Wave network main controller into learning mode
(see Z-Wave network controller operating manual).
(3) Triple click the Z-button.
(4) If the inclusion is successful, the LED will blink in blue less
than for 5 seconds and then keep on for 15 seconds.
TIP:
IfyouwantyourSceneControllertobeasecuritydevicethat
usesecure/encryptedmessagetocommunicateinaZ-Wave
network,thenasecurityenabledZ-Wavecontrollerisneeded.
To remove the Scene Controller from the Z-Wave network:
(1) Insert the LIR2450 battery.
(2) Set the Z-Wave network main controller into remove mode
(see Z-Wave controller operating manual).
(3) Triple click the Z-button, if the exclusion is successful, LED
will blink in orange for less than 5 seconds and then keep on
for 3 seconds.
Ⅳ. REMOVING FROM Z-WAVE NETWORK
Ⅴ. RESET SCENE CONTROLLER
Reset procedure clears the Scene Controller's memory,
including Z-Wave network information.
To reset Scene Controller:
Pressing and holding the Z-button for 20 seconds. Release the
button after 20 seconds, LED will keep in yellow for 3 seconds.
Scene Controller will be reset to factory defaults if you short
press the button within this 3 seconds.
Ⅵ. LOW BATTERY ALARM FUNCTION
Scene Controller will send battery report to the lifeline group
when Z-Button is triggered during the sleep mode. If the battery
level of the Scene Controller is less than 20%, the Scene Controller
will beep 3 times when the button is pressed.
Ⅶ. COMMUNICATION FAILURE ALARM FUNCTION
The Scene Controller will beep one time when the communication
between the Scene Controller and any one of the controlled device
is failed.
Ⅷ. TESTING Z-WAVE NETWORK RANGE
Scene Controller's LED indicator can signal its communication
quality with the Z-Wave main controller.
To start testing:
Press and hold the Z-button for 11 to 15 seconds, the LED will keep on
in purple for 3 seconds, it will enter testing mode if you short press the
Z-button during these 3 seconds.
Blink in green –Scene Controller establish a direct communication with
the main controller, and still under checking.
Keep green – The green light should last about 2 seconds, which
means the direct communication is stable.
Blink in orange –Scene Controller can communicate with the main
controller in intermediate radio transmit power level, and still under
checking.
Keep orange – The communication quality is moderate.
Keep Red – The communication is failed.
TIP:
1. This function works only when Scene Controller
has been included into a Z-Wave network.
2. Click the Z button to exit the test.
Ⅸ. BATTERY CHARGING
Scene Controller has an internal rechargeable battery that will run for
half a year under the normal use condition. If the battery level is less
than 20%, this will activate the low battery level function, this means
you need to charge the battery.
The charger's output should be a micro USB terminal with the
specification of output DC 5V.
The LED nearby the micro USB port will keep on in red during the
changing, and it will turn to green if the charging is finished.
Ⅹ. ASSOCIATION
Association allows the Scene Controller to control another
Z-Wave device directly, such as Smart Switch, Smart Dimmer, etc.
Scene Controller supports three association groupings, every
group relates to a specific button action. View details in the
follow section of “Ⅻ. BUTTON FUNCTION”.
Group 1 allows Scene Controller sends the central scene
notification command and battery report command.
Group 2 allows Scene Controller sends the basic set command.
Group 3 allows Scene Controller sends switch multilevel set,
the multilevel start level change and multilevel stop level
change command.
TIP:
1.The max number of associated nodes of all these
3 groups is 5.
2.Association allows for direct transmission of control
command between devices and takes place without
the participation of the main controller.
Ⅺ. WAKE UP
Wake up interval:
Available settings: 0
Default setting: 0
Pressing and holding Z-Button for 3 seconds. Led will turn to green,
which means Scene Controller has successfully sent the wake up
notification out.
NOTE:
The interval time must be set to 0. The wake up
notification will not wake the Scene Controller,
only the action of the button can you wake the
Scene Controller.
Held down (more than 1 second less than 20 seconds) allows
Scene Controller sends:
Central scene notification command to the nodes associated with group 1,
Multilevel start level change command to the nodes associated with group 3.
Release allows Scene Controller sends:
Central scene notification command to the nodes associated with group 1,
Multilevel stop level change command to the nodes associated with group 3.
Included as a secure device
(1) Insert the LIR2450 battery.
(2) Set the Z-Wave network main controller into learning mode
(see Z-Wave network controller operating manual).
(3) Pressing and holding the Z-button for 3 seconds.
(4) If the inclusion is successful, the LED will blink in green less than
for 5 seconds and then keep on for 15 seconds.
NOTE:
Use this procedure only in the event that the network
primary controller is missing or otherwise inoperable.
Scene Controller offers a wide variety of advanced configuration
settings. Below parameters can be accessed from main controllers
configuration interface.
Parameter No.254 Enable/disable the configuration command
Lock/unlock all configuration parameters.
0 – Unlock.
1 – Lock.
Default setting: 0
Parameter size: 1[byte]
Parameter No.255 Reset Scene Controller
Reset the sensor or remove from the Z-Wave network
Value: 1431655765
Default: 1
Parameter size: 4[byte]
Reset to factory default settings and removed from the Z-Wave network.
Value: 85
Default: 1
Parameter size: 1[byte]
Reset the values of the configuration command to default setting.
XIII. ADVANCED CONFIGURATION
XIV. NOTES FOR OTA
You may need the Over the Air (OTA) feature for the product's firmware
upgrade. Your Scene Controller can not be used after OTA. In such a case,
you need to activate the product by pressing and holding the Z-Button until
the led turns on, this procedure may take you about 10 seconds. After these
your Scene Controller will be usable.
Ⅻ. BUTTON FUNCTION
Scene Controller offers three button action types, including short
press, held down and release.
Short press allows Scene Controller sends:
Central scene notification command to the nodes associated with group 1,
Basic set command to the nodes associated with group 2.
Switch multilevel set command to the nodes associated with group 3.