The VX-402 Series battery operated outdoor detector (VX-402R) provides exceptional detection capability with simple low-cost outdoor installation. It utilizes multiple detection patterns and advanced temperature compensation for improved reliability and reduced false alarms. The VX-402REC model adds voice recording and warning functions for flexible alarm applications.
This document provides product information for a 3rd Generation thinQ! Silicon Carbide Schottky Diode. Some key details:
1) It uses revolutionary Silicon Carbide semiconductor material, providing switching behavior benchmarks, no reverse/forward recovery, and temperature independent switching.
2) It has a breakdown voltage of 600V, forward current of 10A, and capacitive charge of 16nC.
3) It is optimized for fast switching applications like power supplies, motor drives, solar, and UPS systems.
The document discusses a workshop on smart sensor systems held by Delft Institute of Microelectronics. It provides an overview of various lectures on topics related to silicon sensors and smart sensor design, including applications, measurement techniques, calibration, sensor types, interfaces and more. The goal is to discuss specifications, design and development of smart silicon sensor systems.
This document provides information about the MUSES01, a dual J-FET input, high quality audio operational amplifier. It is optimized for high-end audio applications and features excellent sound quality. Key specifications include an input offset voltage of 0.8mV typical and 5mV maximum, input bias current of 200pA typical and 800pA maximum, and voltage gain of 105dB typical. The amplifier has a bipolar technology, DIP8 package outline, and pin configuration shown. Application notes provide guidance on power dissipation and thermal design.
W-BAND RADIOMETER SYSTEM WITH SWITCHING FRONT-END FOR MULTI-LOAD CALIBRATION.pdfgrssieee
The document describes a W-band radiometer system with a switching front-end for multi-load calibration. It includes a single-pole-five-throw switch that allows for fast switching between multiple reference loads for internal calibration. Modules use metamorphic high-electron-mobility transistor technology and achieve gains over 20 dB up to 105 GHz with noise figures of 2 dB. The system provides a compact alternative to external hot-cold calibration with moving parts. It will allow for integrated active loads and faster calibration times.
The document provides specifications for the TCRT1000 and TCRT1010 reflective optical sensors. The sensors include an infrared emitter and phototransistor in a leaded package, and are designed to detect the presence or absence of objects within 1 mm of the sensor surface. Key specifications include a peak operating distance of 1 mm, typical output current of 0.5 mA, and operating range of 0.2-4 mm for relative collector current above 20%. Applications include optoelectronic scanning and switching devices.
The document describes the AX-TN/TF series of short range photoelectric detectors from OPTEX. It provides specifications for various models with maximum detection ranges from 20 to 60 meters. Key features highlighted include an IP65 structure for protection against dust and water, adjustable beam frequencies to avoid crosstalk, and automatic gain control to maintain sensitivity in varying environments. The detectors are designed to reduce false alarms from outdoor conditions while providing stable intruder detection performance.
This document provides data sheets for the 1N4148 and 1N4448 high-speed switching diodes. It summarizes their key features and specifications, including maximum voltage and current ratings, packaging details, and thermal and electrical characteristics graphs. The diodes are designed for high-speed switching applications with maximum switching speeds of 4 nanoseconds.
This document provides product information for a 3rd Generation thinQ! Silicon Carbide Schottky Diode. Some key details:
1) It uses revolutionary Silicon Carbide semiconductor material, providing switching behavior benchmarks, no reverse/forward recovery, and temperature independent switching.
2) It has a breakdown voltage of 600V, forward current of 10A, and capacitive charge of 16nC.
3) It is optimized for fast switching applications like power supplies, motor drives, solar, and UPS systems.
The document discusses a workshop on smart sensor systems held by Delft Institute of Microelectronics. It provides an overview of various lectures on topics related to silicon sensors and smart sensor design, including applications, measurement techniques, calibration, sensor types, interfaces and more. The goal is to discuss specifications, design and development of smart silicon sensor systems.
This document provides information about the MUSES01, a dual J-FET input, high quality audio operational amplifier. It is optimized for high-end audio applications and features excellent sound quality. Key specifications include an input offset voltage of 0.8mV typical and 5mV maximum, input bias current of 200pA typical and 800pA maximum, and voltage gain of 105dB typical. The amplifier has a bipolar technology, DIP8 package outline, and pin configuration shown. Application notes provide guidance on power dissipation and thermal design.
W-BAND RADIOMETER SYSTEM WITH SWITCHING FRONT-END FOR MULTI-LOAD CALIBRATION.pdfgrssieee
The document describes a W-band radiometer system with a switching front-end for multi-load calibration. It includes a single-pole-five-throw switch that allows for fast switching between multiple reference loads for internal calibration. Modules use metamorphic high-electron-mobility transistor technology and achieve gains over 20 dB up to 105 GHz with noise figures of 2 dB. The system provides a compact alternative to external hot-cold calibration with moving parts. It will allow for integrated active loads and faster calibration times.
The document provides specifications for the TCRT1000 and TCRT1010 reflective optical sensors. The sensors include an infrared emitter and phototransistor in a leaded package, and are designed to detect the presence or absence of objects within 1 mm of the sensor surface. Key specifications include a peak operating distance of 1 mm, typical output current of 0.5 mA, and operating range of 0.2-4 mm for relative collector current above 20%. Applications include optoelectronic scanning and switching devices.
The document describes the AX-TN/TF series of short range photoelectric detectors from OPTEX. It provides specifications for various models with maximum detection ranges from 20 to 60 meters. Key features highlighted include an IP65 structure for protection against dust and water, adjustable beam frequencies to avoid crosstalk, and automatic gain control to maintain sensitivity in varying environments. The detectors are designed to reduce false alarms from outdoor conditions while providing stable intruder detection performance.
This document provides data sheets for the 1N4148 and 1N4448 high-speed switching diodes. It summarizes their key features and specifications, including maximum voltage and current ratings, packaging details, and thermal and electrical characteristics graphs. The diodes are designed for high-speed switching applications with maximum switching speeds of 4 nanoseconds.
The 100 Series Plug-in Smoke Detectors offer a low-profile design that is just 2 inches deep. They have a photoelectric or photoelectric/thermal sensor and compatible with various adapter bases. The detectors have a sleek design, dual LEDs for visibility, and broad range of accessories. They are designed to meet UL performance standards and have features to reduce false alarms.
The testo 477 LED hand stroboscope allows for measuring rotation and vibration movements up to 300,000 flashes per minute. It has a high light intensity, long battery life, impact protection, and can connect to external systems. The static images it produces allow inspection and evaluation of fast-moving components.
The document provides technical information about the TK2050, a 50W Class-T digital audio amplifier using Tripath's Digital Power Processing technology. It offers high output power of 50W at 8 ohms or less than 1% THD+N and high efficiency of 92% at 60W into 8 ohms. The amplifier integrates the TC2000 audio signal processor and TP2050 power stage driver. It is suitable for applications such as home theater and stereo systems.
Inductive proximity sensors detect metal objects without physical contact through generating a magnetic field. They comprise an oscillator that creates an alternating magnetic field in front of its windings. When a metal object enters this field, it disturbs the oscillation and causes an output signal. Key advantages are contactless detection, high speeds, fast response, and durability in industrial environments due to having no moving parts.
1) The document describes high-speed switching diodes called the 1N4148 and 1N4448 that are fabricated using planar technology and encapsulated in hermetically sealed leaded glass packages.
2) The diodes have a maximum switching speed of 4 ns and can withstand a continuous reverse voltage of 75V and repetitive peak reverse voltage of 100V.
3) Electrical characteristics including forward voltage, reverse current, diode capacitance and reverse recovery time are provided in tables and graphs.
This document provides specifications for the ROTAPULS C82 incremental encoder. It can be used for elevator motors with a resolution up to 4096 pulses per revolution. It has an operating temperature range of -20°C to +70°C as standard, or -40°C to +100°C as an option. The encoder has mechanical specifications including shaft dimensions and speeds, electrical specifications for power supply, output signals, and connections.
This document describes intelligent addressable reflective beam detectors that can detect smoke or fire across large open areas. The MAB50R has a range of up to 50 meters, while the MAB100R has a range of 50-100 meters. Both connect to the fire alarm control panel via a loop circuit and do not require a separate power supply. They have three operating modes for alignment and detection. Optional mounting brackets are available to facilitate installation.
This document provides product specifications for Philips Semiconductors' BY329F and BY329X series of rectifier diodes. The key points are:
1. The BY329F and BY329X series feature low forward voltage drop, fast reverse recovery, and soft recovery characteristics, making them suitable for use in TVs, monitors, and switched mode power supplies.
2. The diodes offer low forward voltage, fast switching speeds, soft recovery characteristics, high thermal cycling performance, and isolation from the mounting tab.
3. Limiting electrical values, thermal characteristics, isolation characteristics, static and dynamic parameters are provided to specify the performance of these rectifier diodes.
This document discusses GK21 Global's solar tracker assembling line, technical patents, certifications, and solar tracking system. It describes the company's solar tracker assembling facility and one-set-up line for design and manufacturing. It also details the company's 10 domestic and overseas technical patents. Furthermore, it provides information on GK21 Global's solar tracking technology, including its photon diode solar sensor system, solar tracker controllers that maximize module efficiency, and a center control system to remotely monitor and control multiple solar tracker groups.
The testo 110 is a 1-channel temperature measuring instrument that is highly accurate and universally applicable. It has an optional protective case called TopSafe that protects it from dirt, water, and impacts. Key features include a large backlit display, minimum/maximum value storage, audible alarms, accuracy of ±0.2°C from -20°C to +80°C, and certification according to EN 13485. It can be used with both wired and wireless probes for various temperature measurement applications.
The Outdoor MotionViewer Camera DCV is a battery-operated, wireless outdoor motion-activated camera that uses S2View spread spectrum technology. It features a CMOS sensor, 85 degree lens, motion and tamper detection, two-year battery life, and transmits video to the control panel upon detecting motion within 12 meters. The camera is fully waterproof and can withstand temperatures from -20 to 60 degrees Celsius.
The document provides information about the PowerLog 6S multifunctional monitoring and logging meter. It can monitor and log values such as voltage, current, temperature, RPM, PWM signals, and motor KV. The PowerLog 6S has inputs for voltage, current, temperature sensors, a tachometer, and more. It stores logged data, connects to a computer via USB, and can trigger alarms. The document outlines the PowerLog 6S's specifications, features, connections, display, menus, and button functions.
The TOSHIBA MG75J2YS50 is a silicon n-channel IGBT module suitable for high power switching and motor control applications. It includes a complete half bridge in one package and has features such as enhancement-mode operation, low saturation voltage, and high speed switching times. The document provides maximum ratings, electrical characteristics, and notes regarding its intended use and limitations of liability.
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
Suppliers of Inductive Proximity Switches, Capacitive Proximity Switches, Optical Proximity Switches, Magnetic Proximity Switches, Electronic Speed Switches, Pull Cord Switches, Belt Sway Switches, Heavy Duty Limit Switches, a comprehensive range of Process Control Instruments & Automation Components. These products are widely used in automobile, electronics, pharmaceutical and food industries.
This document provides information on the CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger integrated circuit. It consists of four independent Schmitt trigger NAND gates, each with Schmitt trigger hysteresis on both inputs for noise immunity. The IC has a wide supply voltage range of 3-15V, and specifications for propagation delay, input/output voltage levels and currents, and hysteresis are provided over temperature. Typical applications include wave shaping, pulse generation, and logic functions. Dimensions and packaging options are included.
This document provides a user manual for a wireless passive infrared sensor detector. It detects human infrared heat energy and transmits a wireless digital signal. The detector uses advanced digital signal processing, automatic temperature compensation, and low power alerts. It has functions like dual infrared sensors, low power consumption, automatic temperature compensation, and different sensitivity levels. The detector requires batteries or an external DC power supply. It can be installed on walls and ceilings to detect motion within a range of up to 8 meters.
This document summarizes the specifications and characteristics of the TPC8014 transistor. Key details include:
1) It is a small footprint, low RDS(on) MOSFET designed for portable equipment applications like notebooks.
2) Electrical characteristics include a typical RDS(on) of 11 mΩ and typical forward transfer admittance of 10 S.
3) Absolute maximum ratings include a drain-source voltage of 30V and drain current of 11A.
This document describes infrared temperature sensors. It provides details on their features such as temperature range, rugged housing, optics, outputs, and power specifications. It also lists available sensor models with different output types, housings, cable lengths, and accessories, along with their prices. The document concludes with a two-year limited warranty statement.
This document provides instructions for setting up and using the Microlatch CCF-15M biometric access control reader. It consists of 4 sections:
1. An overview of the product including diagrams of the front and rear views showing the LED lights and program interface button.
2. A wiring diagram showing how to connect the communication cable.
3. Instructions for installing and initially configuring the device by pressing the program button a specified number of times to select the operation mode.
4. Step-by-step instructions for standard user verification when an enrolled tag is presented and the fingerprint matching process.
The LBC 3090/01 is an economic ceiling loudspeaker for speech and music reproduction in various commercial and institutional settings. It has a 6W dual cone loudspeaker, protective dust cover, and optional fire dome. Installation is quick with built-in spring locks or surface mounting box. It provides full range sound and complies with international safety standards.
The 100 Series Plug-in Smoke Detectors offer a low-profile design that is just 2 inches deep. They have a photoelectric or photoelectric/thermal sensor and compatible with various adapter bases. The detectors have a sleek design, dual LEDs for visibility, and broad range of accessories. They are designed to meet UL performance standards and have features to reduce false alarms.
The testo 477 LED hand stroboscope allows for measuring rotation and vibration movements up to 300,000 flashes per minute. It has a high light intensity, long battery life, impact protection, and can connect to external systems. The static images it produces allow inspection and evaluation of fast-moving components.
The document provides technical information about the TK2050, a 50W Class-T digital audio amplifier using Tripath's Digital Power Processing technology. It offers high output power of 50W at 8 ohms or less than 1% THD+N and high efficiency of 92% at 60W into 8 ohms. The amplifier integrates the TC2000 audio signal processor and TP2050 power stage driver. It is suitable for applications such as home theater and stereo systems.
Inductive proximity sensors detect metal objects without physical contact through generating a magnetic field. They comprise an oscillator that creates an alternating magnetic field in front of its windings. When a metal object enters this field, it disturbs the oscillation and causes an output signal. Key advantages are contactless detection, high speeds, fast response, and durability in industrial environments due to having no moving parts.
1) The document describes high-speed switching diodes called the 1N4148 and 1N4448 that are fabricated using planar technology and encapsulated in hermetically sealed leaded glass packages.
2) The diodes have a maximum switching speed of 4 ns and can withstand a continuous reverse voltage of 75V and repetitive peak reverse voltage of 100V.
3) Electrical characteristics including forward voltage, reverse current, diode capacitance and reverse recovery time are provided in tables and graphs.
This document provides specifications for the ROTAPULS C82 incremental encoder. It can be used for elevator motors with a resolution up to 4096 pulses per revolution. It has an operating temperature range of -20°C to +70°C as standard, or -40°C to +100°C as an option. The encoder has mechanical specifications including shaft dimensions and speeds, electrical specifications for power supply, output signals, and connections.
This document describes intelligent addressable reflective beam detectors that can detect smoke or fire across large open areas. The MAB50R has a range of up to 50 meters, while the MAB100R has a range of 50-100 meters. Both connect to the fire alarm control panel via a loop circuit and do not require a separate power supply. They have three operating modes for alignment and detection. Optional mounting brackets are available to facilitate installation.
This document provides product specifications for Philips Semiconductors' BY329F and BY329X series of rectifier diodes. The key points are:
1. The BY329F and BY329X series feature low forward voltage drop, fast reverse recovery, and soft recovery characteristics, making them suitable for use in TVs, monitors, and switched mode power supplies.
2. The diodes offer low forward voltage, fast switching speeds, soft recovery characteristics, high thermal cycling performance, and isolation from the mounting tab.
3. Limiting electrical values, thermal characteristics, isolation characteristics, static and dynamic parameters are provided to specify the performance of these rectifier diodes.
This document discusses GK21 Global's solar tracker assembling line, technical patents, certifications, and solar tracking system. It describes the company's solar tracker assembling facility and one-set-up line for design and manufacturing. It also details the company's 10 domestic and overseas technical patents. Furthermore, it provides information on GK21 Global's solar tracking technology, including its photon diode solar sensor system, solar tracker controllers that maximize module efficiency, and a center control system to remotely monitor and control multiple solar tracker groups.
The testo 110 is a 1-channel temperature measuring instrument that is highly accurate and universally applicable. It has an optional protective case called TopSafe that protects it from dirt, water, and impacts. Key features include a large backlit display, minimum/maximum value storage, audible alarms, accuracy of ±0.2°C from -20°C to +80°C, and certification according to EN 13485. It can be used with both wired and wireless probes for various temperature measurement applications.
The Outdoor MotionViewer Camera DCV is a battery-operated, wireless outdoor motion-activated camera that uses S2View spread spectrum technology. It features a CMOS sensor, 85 degree lens, motion and tamper detection, two-year battery life, and transmits video to the control panel upon detecting motion within 12 meters. The camera is fully waterproof and can withstand temperatures from -20 to 60 degrees Celsius.
The document provides information about the PowerLog 6S multifunctional monitoring and logging meter. It can monitor and log values such as voltage, current, temperature, RPM, PWM signals, and motor KV. The PowerLog 6S has inputs for voltage, current, temperature sensors, a tachometer, and more. It stores logged data, connects to a computer via USB, and can trigger alarms. The document outlines the PowerLog 6S's specifications, features, connections, display, menus, and button functions.
The TOSHIBA MG75J2YS50 is a silicon n-channel IGBT module suitable for high power switching and motor control applications. It includes a complete half bridge in one package and has features such as enhancement-mode operation, low saturation voltage, and high speed switching times. The document provides maximum ratings, electrical characteristics, and notes regarding its intended use and limitations of liability.
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
Suppliers of Inductive Proximity Switches, Capacitive Proximity Switches, Optical Proximity Switches, Magnetic Proximity Switches, Electronic Speed Switches, Pull Cord Switches, Belt Sway Switches, Heavy Duty Limit Switches, a comprehensive range of Process Control Instruments & Automation Components. These products are widely used in automobile, electronics, pharmaceutical and food industries.
This document provides information on the CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger integrated circuit. It consists of four independent Schmitt trigger NAND gates, each with Schmitt trigger hysteresis on both inputs for noise immunity. The IC has a wide supply voltage range of 3-15V, and specifications for propagation delay, input/output voltage levels and currents, and hysteresis are provided over temperature. Typical applications include wave shaping, pulse generation, and logic functions. Dimensions and packaging options are included.
This document provides a user manual for a wireless passive infrared sensor detector. It detects human infrared heat energy and transmits a wireless digital signal. The detector uses advanced digital signal processing, automatic temperature compensation, and low power alerts. It has functions like dual infrared sensors, low power consumption, automatic temperature compensation, and different sensitivity levels. The detector requires batteries or an external DC power supply. It can be installed on walls and ceilings to detect motion within a range of up to 8 meters.
This document summarizes the specifications and characteristics of the TPC8014 transistor. Key details include:
1) It is a small footprint, low RDS(on) MOSFET designed for portable equipment applications like notebooks.
2) Electrical characteristics include a typical RDS(on) of 11 mΩ and typical forward transfer admittance of 10 S.
3) Absolute maximum ratings include a drain-source voltage of 30V and drain current of 11A.
This document describes infrared temperature sensors. It provides details on their features such as temperature range, rugged housing, optics, outputs, and power specifications. It also lists available sensor models with different output types, housings, cable lengths, and accessories, along with their prices. The document concludes with a two-year limited warranty statement.
This document provides instructions for setting up and using the Microlatch CCF-15M biometric access control reader. It consists of 4 sections:
1. An overview of the product including diagrams of the front and rear views showing the LED lights and program interface button.
2. A wiring diagram showing how to connect the communication cable.
3. Instructions for installing and initially configuring the device by pressing the program button a specified number of times to select the operation mode.
4. Step-by-step instructions for standard user verification when an enrolled tag is presented and the fingerprint matching process.
The LBC 3090/01 is an economic ceiling loudspeaker for speech and music reproduction in various commercial and institutional settings. It has a 6W dual cone loudspeaker, protective dust cover, and optional fire dome. Installation is quick with built-in spring locks or surface mounting box. It provides full range sound and complies with international safety standards.
The LBC 3087/41 is a flush-mounted ceiling loudspeaker suitable for speech and music reproduction. It has increased sensitivity and is ball-proof. It complies with international safety regulations and British Standard BS5839 part 8 for voice alarm systems. An optional certified fire dome can further protect the loudspeaker from fire damage.
The document describes the Honeywell HD-16DVR-C 16-channel digital video recorder. It supports up to 16 camera inputs, 4 internal hard drives for storage, and recording of video at 400/480 frames per second. It uses H.264 compression to save bandwidth and storage. The DVR allows remote monitoring through a network or mobile phone and integrates with Honeywell surveillance software. It is suitable for medium-sized surveillance installations.
The document describes four different addressable monitor modules for Fire-Lite's intelligent control panels:
1) The MMF-300(A) supervises dry-contact devices on a Class A or B circuit.
2) The miniature MMF-301(A) also supervises dry contacts and fits in a single-gang box.
3) The MMF-302(A) monitors and powers two-wire smoke detectors on a Class A or B circuit.
4) The MDF-300(A) dual monitor module provides two independent Class B circuits at consecutive addresses.
Dokumen tersebut memberikan ringkasan singkat tentang pengenalan MS Word 2010 dan cara menggunakannya. Terdapat penjelasan mengenai menu-menu utama MS Word 2010 beserta fungsinya seperti menu File, Home, Insert, Page Layout, References, Mailings, Review, View, serta Table Tools.
Newmark Knight Frank has one of the largest not-for-profit real estate services divisions in the US. They have served over 150 not-for-profit groups nationally and are a strategic advisor to many prominent global organizations. Their not-for-profit services division employs professionals in key markets like DC, NYC, and SF with experience representing not-for-profit clients. They represent large not-for-profit organizations and provide strategic real estate consulting, addressing financial and operational issues unique to the not-for-profit sector.
The VRT-100 Remote Programmer allows remote access and configuration of VESDA air sampling systems. It has a user-friendly interface with soft keys and menus to view system status, configure detectors and thresholds, and program other settings. Up to 14 users with different access levels can be assigned passwords to log in and view or modify parameters.
This document summarizes an LB1-UW06-Fx cabinet loudspeaker from Bosch. It is a 6W loudspeaker intended for indoor use. It has mounting brackets for wall or ceiling mounting. It is constructed of MDF and has a durable vinyl or cloth covering available in white or black. It provides good speech intelligibility and background music reproduction.
The document describes the SpectrAlert Advance series of indoor wall-mountable horns, strobes, and horn strobes. It has several key features:
- Plug-in design for fast installation with minimal intrusion into the back box.
- Tamper-resistant construction and universal mounting plate.
- Field-selectable settings for voltage, candela, tone, and volume.
- Automatic selection of 12- or 24-volt operation to simplify installation.
2011 - Recent developments in the field of EU social security coordination trESS Network
The document summarizes recent developments in EU social security coordination. It discusses legislative developments including a new regulation extending coordination rules to third country nationals and implementing several association agreements. It outlines new decisions by the Administrative Commission regarding applicable legislation, unemployment benefits, and substantial benefits in kind. Finally, it previews upcoming work on the international dimension of coordination, miscellaneous amendments, and linking coordination better to other EU initiatives and policies.
congrads to dr. Jame Abraham ,
the first "Bonnie Wells Wilson Eminent Scholar and Distinguished Professor in Breast Cancer Research" position by the west virginia University. This was done by a 1 million dollar endowed position created by a family to honor their mother. Jame is from Chapparapadavu, kannoor.
Tutorial ini menjelaskan langkah-langkah untuk membuat efek hujan dan awan terlihat tua pada foto menggunakan Photoshop, meliputi penggunaan filter seperti Add Noise, Motion Blur, Levels dan Gaussian Blur untuk menciptakan efek hujan, serta pengaturan warna menggunakan Levels untuk membuat awan terlihat lebih tua.
This document provides specifications for the AX-TN/TF series of short range photoelectric detectors. The detectors use infrared beam interruption to detect intruders within ranges of 20-60 meters. They operate between -35°C and +60°C, have an IP65 rating for durability, and include options for pole mounting, covers, and a heating unit for cold environments. The AX-TN/TF series is designed to be part of a security system and provide stable detection performance across outdoor conditions.
This document summarizes a master's thesis presentation on the design of power management for autonomous wireless monitoring systems. It discusses motivation for the work, the state-of-the-art in power management techniques, measurements of RF energy harvesters to characterize performance and derive specifications, design of the power management circuit based on the specifications, and recommendations and conclusions. The work aims to design an efficient power management system that can operate from low power harvested by RF rectennas.
This document provides information on explosive atmosphere products certified for use in dust zones, including:
- Proximity sensors for zones 21-22 certified for dust explosions.
- Limit switches, pressure switches, and operator interface products like pushbuttons certified for zones 21-22.
- Weighing, automation, and interface modules from Schneider Electric for integration into zone-rated control panels.
This document provides product specifications for the Energizer 522 9V battery. It lists technical details such as the battery's classification, chemical system, dimensions, voltage, capacity ratings, and performance in various tests. Graphs show voltage output over time under constant resistance and constant current discharge conditions. The document is intended to help users select the appropriate battery for their needs.
P700 Solid State Power Controller (SSPC) is a fully rated 150 Amperes device available for use in today\’s and tomorrow\’s Power Systems. Features reliable trouble free switching together with real short circuit
protection. Load current is sensed and shutdown initiated within microseconds.
The GMX Series is Alpha's line interactive standby power supply designed for cable television and broadband systems. It provides regulated AC power free of spikes, surges, sags and noise, and can compensate for ±30% input voltage variations. Key features include optional DOCSIS or ethernet monitoring, a smart display, programmable battery testing, and replaceable surge protectors. It is available in 120V, 240V, and 240V 50Hz models ranging from 7.8 to 60 pounds.
This document describes the specifications of the KM 2775 33⁄4 digit 2000A AC/DC digital clamp meter. It has 11 functions and 34 measurement ranges. Key features include auto-ranging, data hold, continuity and diode testing. Electrical specifications include the measurement ranges and accuracy for AC/DC voltage and current, capacitance, frequency, resistance, continuity testing and diode testing. It is powered by a standard 9V battery and has safety certifications for CAT III 600V applications.
The document describes an FT-901A-S-LC20 155Mbps Fast Ethernet SFP transceiver module that operates at 1310nm for transmission and 1550nm for reception over single mode fiber for distances up to 20km. It has an LC connector and complies with relevant telecom standards. The transceiver uses a laser driver chip and post-amplification circuitry to transmit and receive Fast Ethernet signals over a single fiber via a wavelength division multiplexing filter.
This document provides information about the FT-901B-S-LC20 series 155Mbps Fast Ethernet SFP transceiver module. It operates at 1550nm for transmission and 1310nm for reception over single mode fiber with an LC connector and a reach of 20km. The module complies with relevant standards and has features such as hot pluggability and a TTL-level signal detect indicator. It provides optical-to-electrical conversion with differential inputs/outputs and includes a laser driver IC and post-amplification circuitry.
This document provides information about the FT-901B-S-LC20 series 155Mbps Fast Ethernet SFP transceiver module. It operates at 1550nm for transmission and 1310nm for reception over single mode fiber with an LC connector and a reach of 20km. The module complies with relevant standards and has features such as hot pluggability and a TTL-level signal detect indicator. It provides optical-to-electrical conversion with differential inputs/outputs and has specifications for its optical, electrical, and mechanical characteristics.
The document provides specifications for an intruder alarm system from Premier, including the Premier 888 and Premier 8168 control panels, as well as related devices. The Premier 888 and 8168 are designed for medium to large security installations and provide features like programmable zones and outputs, independent areas, log of events with time/date stamps, and plug-on digital communicators. The 888 supports up to 8 zones/outputs and 8 areas, while the 8168 supports up to 16/16. LCD keypads and output modules are also specified.
This document provides specifications for the RS-35 series of 35W single output switching power supplies. It lists 6 models that provide different output voltages ranging from 3.3V to 48V. The power supplies have universal AC input, short circuit and overvoltage protections, and provide well-regulated output voltage with low ripple. Key specifications like output power, current, efficiency and dimensions are provided for each model.
This document provides an overview of safety and maintenance solutions for network electricians from The Novarc Group - ESP Division. It introduces their product ranges, which include climbing equipment, fall protection gear, arc flash protection, low voltage detectors, phase rotation indicators, cable identification tools, insulating sticks, insulated tools for live working, temporary insulation, and substation/rescue equipment. The company aims to protect operators, provide reliable products, and improve maintenance and operations on electrical networks. Their products are designed and manufactured in France in compliance with European standards, drawing on over 60 years of experience in electrical safety equipment.
The 103YCB is a line amplifier designed for s-Video signals that can distribute and amplify signals over long distances. It has high bandwidth of 420MHz for the Y channel, multiple output options including two 4-pin outputs and one 2-BNC output, and controls for adjusting the Y and C signal levels and Y equalization. Measuring only 12cm x 7.5cm x 2.5cm, it can fit in a compact 1U rack space with an optional rack adapter.
The 103YCB is a line amplifier designed for s-Video signals that can distribute and amplify signals over long distances. It has high bandwidth of 420MHz for the Y channel, multiple output options including two 4-pin outputs and one 2-BNC output, and controls for adjusting the Y and C signal levels and Y equalization. Measuring only 12cm x 7.5cm x 2.5cm, it can fit in a compact 1U rack space with an optional rack adapter.
The 103YCB is a line amplifier designed for s-Video signals that can distribute and amplify signals over long distances. It has high bandwidth of 420MHz for the Y channel, multiple outputs including two 4-pin outputs and one 2-BNC output, and controls for adjusting the Y and C signal levels and Y equalization. Measuring only 12cm x 7.5cm x 2.5cm, it can fit in a compact 1U rack space with an optional rack adapter.
This document provides information about the FT-901A-S-LC20 series 155Mbps Fast Ethernet SFP transceiver module. It operates at 1310nm for transmission and 1550nm for reception over single mode fiber with an LC connector and a reach of 20km. The transceiver complies with relevant Fast Ethernet, WDM and telecom standards and has features such as hot-pluggability and RoHS compliance. It provides optical, electrical and mechanical specifications for the transmitter and receiver components.
This document summarizes the specifications of a coaxial APD (Avalanche Photodiode) module. It lists the features of high responsivity and low noise. It has a standard TO-46 package and applications in CATV and OTDR systems. The document provides maximum ratings, optical and electrical characteristics including responsivity, dark current, capacitance, response time and bandwidth. It also includes the mechanical dimensions and packaging information.
This document provides a model evaluation report for a Texas Instruments TL431 voltage regulator component. It includes the model parameters, SPICE simulation results comparing measured and simulated component characteristics, and evaluation circuits used for testing. Simulation results match measurements well with less than 10% error for most output and reference characteristics.
The document summarizes the specifications and features of the Texecom Odyssey 3 external sounder and strobe series. Key features include a 115dB volume, IP65 sealed electronics, selectable SAB/SCB mode, screw, lid, and wall tamper protection, twin alternating LEDs, and revolutionary screw retention system. It is competitively priced, easy to install, and provides uncompromising performance for professional security installations.
The document describes the TOA VM-3000 series integrated voice evacuation system. It is an EN 54 compliant system that combines emergency voice alarm and public address functions. Key features include fully digital audio processing and control, built-in voice messages, monitoring of speaker lines, and support for paging, background music, and microphone inputs. The system is suitable for small to medium venues and provides emergency evacuation and general announcement capabilities.
The document describes the TOA VM-3000 series integrated voice evacuation system. The VM-3000 series provides both emergency evacuation functions and general public address/paging functions. It is EN 54 certified and ideal for small to medium venues. The system has integrated amplifiers, supports up to 60 speaker zones, and can be configured via software.
This document provides installation instructions for installing a SV-200MA Surveillance Board in VM-2120 or VM-2240 amplifiers. The SV-200MA adds monitoring, zone control, and backup amplifier functions. It consists of an SV-200M board and SV extension board. The 10 step installation process includes setting jumpers, connecting cables between the boards, mounting the surveillance board, and replacing the amplifier cover.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's SC Series Paging Horn Speakers. It includes specifications for 6 models that are rated at either 10W, 15W, or 30W and are designed for both indoor and outdoor use. The speakers feature weatherproof stainless steel brackets, powder coated horns, and input impedance selector switches on high-impedance models. Diagrams show the speakers' frequency responses, beamwidths, directivity factors, and polar responses.
The document describes TOA's CS-154 and CS-304 outdoor wide-range speakers. The speakers use wide-range horns to provide high quality background music or paging announcements over a wide area. They are designed for outdoor use and have weatherproof enclosures that can withstand demanding environmental conditions. The speakers have adjustable impedance settings and provide high output with increased efficiency through the use of a horn and cone speaker combination.
The document describes the TOA BS-678 wall mount speaker system. It is a double-cone speaker with a wooden cabinet and stylish, compact design. It produces high quality sound for background music and announcements. Key features include an adjustable input impedance selector, push-in connector for easy wiring, and horizontal or vertical mounting orientation. Specifications include a frequency response of 150-20,000Hz, 6W or 3W power handling, and an off-white finish.
The document describes the TOA BS-633A/633AT wall mount speaker systems. The BS-633A is a basic 5" cone speaker with a transformer allowing multiple power taps. The BS-633AT includes an additional built-in attenuator, allowing connection to 2-wire and 3-wire speaker systems. Both have a compact ABS resin enclosure and push-in terminal for easy installation. Key specifications include a frequency response of 120-15,000Hz, 91dB sensitivity, and multiple power taps for 100V and 70V speaker lines.
This document summarizes a 6W loudspeaker for indoor use. It has good speech intelligibility and background music reproduction. The loudspeaker has an MDF construction with mounting brackets for wall or ceiling installation. It complies with international safety regulations and certifications.
The LA1-UW36-x is a 36W column loudspeaker for indoor use where directivity is important. It has high sensitivity and provides good speech intelligibility and background music reproduction. It has a swivel wall mounting bracket and is available in black or white. It uses four dual cone drivers and a durable MDF enclosure for reliability under extreme conditions.
The LA1-UW24-x is a 24W column loudspeaker for indoor use where directivity is important. It has good speech intelligibility and background music reproduction. It comes with a swivel wall-mounting bracket and is available in black or white. It has four high-sensitivity drivers and can be powered at full, half, or quarter power via a terminal block on the rear.
This document provides specifications for a BGT 4139TS video camera model. It includes details on the camera's image sensor, resolution, lenses, operational features like auto day/night mode and infrared LEDs, environmental tolerances, electrical requirements, mechanics including dimensions and weight, and manufacturer. The camera has a 1/3" CCD sensor, 600TVL resolution, auto settings, infrared for night vision up to 20 meters, and an IP66-rated casing.
This document provides specifications for a BGT 5504A camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. It has a 1/4" CCD image sensor, 420TVL resolution, auto day/night mode, 15m infrared range, and measures 92mm diameter by 80mm, weighing 190g.
This data sheet provides specifications for the BGT 5140A video camera, including its CCD image sensor, PAL/NTSC compatibility, effective pixel count, 420TVL horizontal resolution, low light performance down to 0.5 lux, auto day/night functionality, 3.6mm fixed focal length lens, operating temperature range of -10°C to 50°C, power requirements of 12V 150mA with a 12V 1A adapter, and compact dimensions of 60x90x190g.
This data sheet provides specifications for a BGT 9120TS security camera model. It lists technical details such as the CCD image sensor and effective pixel resolution, as well as operational features including auto day/night mode, backlight compensation, and automatic gain control. Environmental specifications note an operating temperature range of -10°C to 50°C and IP66 protection rating. The camera is powered by a 12V 370mA power supply and has dimensions of 266x97x63mm.
This data sheet provides specifications for a BGT 9119AS video camera model. It has a 1/3 inch Sony CCD image sensor that can capture video in PAL or NTSC formats with effective pixel counts of 752x582 or 768x494 respectively. The camera has a 3.6/6mm fixed lens, auto day/night functionality, and can function in temperatures from -10 to 50 degrees Celsius. It is powered by a 12V 1A adapter and has IP67 protection against dust and water.
This document provides specifications for the BGT 720TOS security camera model, including details about its video capabilities, lens, operational features, environmental tolerances, electrical requirements, and dimensions. Key specs include a 1/3" Sony CCD image sensor, 600TVL horizontal resolution, auto day/night functionality, auto electronic shutter speed range of 1/50-1/100,000 sec for PAL and 1/60-1/100,000 sec for NTSC, operating temperature range of -10°C to +50°C, input voltage of DC12V/150mA, and compact dimensions of 102*55*40mm.
This document provides specifications for the BGT 5221AS video camera model. It includes details about the camera's image sensor, resolution, lenses, video output, day/night functionality, electrical requirements, and dimensions. Key features noted are a 1/3" Sony CCD image sensor, 480TVL horizontal resolution, auto day/night mode, infrared LEDs for night vision up to 10 meters, and DC12V 400mA power input. The camera measures 90*108*108mm and weighs 300g.
This document provides specifications for the BGT D1108A video surveillance system. It has 8 BNC video inputs and outputs, supports NTSC/PAL formats, and can record at up to 120/100 FPS in D1 resolution. Storage is provided by a single 2TB SATA HDD. The system supports remote viewing and playback over TCP/IP networks and via mobile apps. It has IP66-rated weather resistance and operates from 0-55°C.
1. MULTI STABILIZED OUTDOOR DETECTOR
Battery Operated ( VX-402R )
The battery operated VX-402R allows for low cost simple outdoor installation, whilst providing exceptional
VX-402REC/402 /402R
voice recording & standard battery
detection capability. warning model model operated model
Battery Saving Circuit
Temperature Compensation
Form C Alarm Output and Tamper Output
Low Current Draw
* Transmitter is not included. Use the commercially available transmitter.
DETECTION PATTERNS SPECIFICATIONS
WIDE ANGLE MODEL VX- 402REC VX-402 VX- 402R
Detection Method Passive Infrared
TOP VIEW
Coverage 12m (40 f t.) 90˚ wide
0 5 10 12 (m)
(ft.) (m) Detection Zones 14 zones
40 12 ADJUSTABLE ZONES Mounting Height 0.8~1.2m (2.7~4f t.)
(15˚ STEP PER NOTCH) Sensitivity 2.0˚ C (3.6˚ F ) at 0.6m/s
10
Detectable Speed 0.3~1.5m/s (1~5f t./s)
30
Power Supply 9.5~18V DC 3~9V DC Alkaline or Lithium Battery
20 Normal 25mA max. 180mA (N.C.) Normal 25mA max. 28mA (N.C.) Max 3mA (Walktest, LED on)
Current Consumption
Normal 12mA max. 200mA (N.O.) Normal 10mA max. 35mA (N.O.) 10uA (Standby)
5
Alarm Period 2 ± 1sec. Approx. 2.5sec.
10
Alarm Output Selectable N.C./N.O.:28V DC 0.2A max. Form C-Solid State Switch:10V DC 0.01A
ACTIVE
DETECTION
Tamper Switch N.C. Opens when cover removed Form C
0 0 ZONES Pulse Count 20 ± 5sec. 2 or 4 Approx. 20sec. 2 or 4
(90˚ WIDE 7 FINGERS) Warm-up Period Approx. 30sec. (LED blinks) Approx. 2min
10 Volume of Audible 75dB -
5 LED is blinking during warm-up period Disable during normal
20 LED Indicator Alarm condition operation
Recording condition - Enable during walk test
30 Weatherproof IP54
10
Operating Temperature -20~+50˚ C (-4~+122˚ F)
40 12 ADJUSTABLE ZONES Operating Humidity 95% max.
(15˚ STEP PER NOTCH)
RF Interference No Alarm 30V/m
0 10 20 30 40 (ft.) Mounting Wall, Pole, Conduit and Electrical Box Wall, Pole
Weight 550g (19.4oz.) 480g (16.9oz.)
Standard Accessories Pole Mount Kit, Screw Kit, Area Masking Plate
SIDE VIEW
Recommended external speaker
Position A (max. 12m)
(ft.) (m) Impedance 8 ohm -
3.3 1
Max. Power over 30W -
0 0
Output S.P.L. over 80dB/m -
0 5 10 12 (m)
0 10 20 30 40 (ft.) Wiring Length 10m -
* Speaker with amplifer can not be used * Only one external speaker can be connected
Position B (max. 8m)
(ft.) (m)
3.3 1 DIMENSIONS
0 0
0 5 10 12 (m) VX-402/402REC VX-402R
0 10 20 30 40 (ft.)
Position C (max. 5m) 80 (3.15) 82 (3.23) 80 (3.15) 108 (4.25)
(ft.) (m)
3.3
0
1
0 Reliable Short-Range Detection for
0 5 10 12 (m)
0 10 20 30 40 (ft.) External Areas
198 (7.8)
198 (7.8)
Position D (max. 2m)
(ft.) (m)
3.3
0
1
0
Ideal for Event Driven CCTV
0 5 10 12 (m)
0 10 20 30 40 (ft.) Applications
*Specifications and design are subject to change without prior notice.
NOTE: This unit is designed to detect movement of an intruder and Two Detection Zones for Superior
activate an alarm control panel. Being only a part of a complete system,
we cannot accept responsibility for any damages or other consequences Stability
resulting from an intrusion. This product conforms to the category
"Residential, Commercial and Light Industry" of EMC Directive 89/336 EEC. mm ( inches )
Any Message Recordable for Each
Application in Any Language
(VX- 402REC)
OPTEX CO., LTD.
(ISO 9001 Certified by LRQA / ISO14001 Certified by JET) Simple wire free installation, with
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL +81(0)77 579 8670 FAX +81(0)77 579 8190 http://www.optex.co.jp/e
OPTEX INCORPORATED (USA) http://www.optexamerica.com
battery operation (VX- 402R)
OPTEX (EUROPE) LTD. (UK) http://www.optexeurope.com
(ISO9001 Certified by NQA)
OPTEX SECURITY SAS (FRANCE) http://www.optex-security.com
OPTEX KOREA CO., LTD. (KOREA) http://www.optexkorea.com
ÒTake Care of the EnvironmentÓ This catalogue uses recycled paper No. 75080-05-909-0503
2. The VX- 402 Series Improved False Alarm Protection for Stable Reliability
The VX-402 Series utilises Multiple Detection Pattern Technology two double-layered detection patterns (upper and
New Solutions for Outdoor Protection lower) both have to be activated to generate an alarm condition. This reduces false alarms, particularly those caused
by temperature changes, light reflection and small animals.
Flexible Detection Range Function
By limiting the detection range, false alarms due to unwanted Multiple Detectors
movement, e.g., cars, people or animals outside the protected for Improved Functionality
area can be reduced.
For advanced functionality and reliabili-
Size Judging Function ty without the need for a control panel,
The size judgment function virtually eliminates false alarms due to the VX-402 can be connected to an-
small animals. other detector, e.g. PIR, photobeam or
magnetic contact. Various configura-
tions are possible.
Detection
Voice Recording / Warning Functions ( VX-402REC only )
Detection Area Extension Function
Wiring two VX-402 series sensors to-
gether and selecting the “OR” Mode en-
The VX-402REC provides great flexibility in detector-activated voice applications. As well as the ability to record any mes- When only the lower zone When only the upper zone When both the upper & low- ables the detection pattern to be effec-
sage in any language, with its superior playback settings, it allows the right message to be played in every situation. detects a moving object, detects a moving object, er zones detect a moving tively doubled.
the unit is not activated. the unit is not activated. object, the unit is activated.
¥ Application Example 1
Advanced Temperature Compensation VX-402 Area VX-402 Area
Easy Voice Recording REC (2nd Sensor) (Master Sensor)
At higher ambient temperatures, the difference between the back- Detection Detection
By using either the built-in microphone or external recording equipment such as a PC, the VX-402REC allows two mes-
ground temperature and that of a human body is reduced. In such
sages of up to eight seconds to in length to be recorded.
cases an ordinary PIR might fail to accurately detect the human
body. The VX-402 uses advanced temperature compensation to
Voice Warning Function PLAY Directional Detection Function
automatically increase the detector's sensitivity under high temper-
Once recorded, the two messages can be delivered in one of four different playback sequences. ature conditions, especially where the background temperature By selecting the "AND" Mode and pro-
ranges from 35-37˚C, close to that of the human body. gramming which sensor should be acti-
Sequential Playback Directional Detection Playback Day/Night Message
vated first (using DIP Switch Program-
Playback Double Conductive Shielding
When the VX-402REC first detects some- When the VX-402REC is used with an- ming), the VX-402 Series can sense di-
one in the area, it delivers a caution mes- other detection device such as an out- Changes the message Patented Double Conductive Shield- rection and will only be activated if mo-
sage. If someone is detected in the same door PIR, active photobeam or a magnet- automatically in daytime ing Technology utilises a special con- Double Conductive Shielding tion is in a specified direction.
area a second time within 30 seconds of ic contact, different messages can be set and nighttime, for exam- ductive filter to cover the element win- Amp
¥ Application Example 2
the first message being given, it is repea- to make double sure intruders are deter- ple giving a welcome dow, allowing infrared energy to pass
Detection /
ted. On a third detection within 30 sec- red. The caution message is generated at message in daytime and through, while blocking and grounding Alarm
Voice Warning
onds, the caution message automatically the first detection, and the warning mes- an alert message at night. out unwanted light and RFI sources.
changes into a warning message. sage generated at the second detection. Arm/Disarm Playback This helps reduce false alarms caused Lens Pyro Electric Element
Infrared Rays Double Shielding
VX-402REC 2nd Detector
Provides a caution alert by car headlights and reflected sun- 2nd Sensor Master Sensor (VX-402/402REC)
Caution Caution Warning
Warning Caution when the Arm Mode is on, light in particular.
(Message A) (Message A) (Message B)
(Message B) (Message A)
Third for example when deter-
Detection DESCRIPTION AND OPERATION (VX-402REC)
First Detection
rence is intended, and
Second Alarm gives a different message
Detection LED Indicator
when disarmed.
No Alarm
Double Conductive
External Speaker Terminal Shielding
Cover
The VX-402REC has a voice output terminal allowing an external speaker to be connected. The most common applica-
tions for this are either when a high-volume announcement is needed or when the best position for the speaker is away Sensitivity Select Switch
Recording Level Indicator
from the detector unit. Recording Start Switch
Microphone
Voice Mode Switch Recording Level Volume
Lens
A Variety of Applications
Voice Volume
Intruder Prevention: An alarm is activated when an intruder enters the property or prohibited area.
Detection Length Adjustment
Warning Alert: A safety warning is activated. For example, when children go near a dangerous area such as a swimming pool.
External Input Jack
Shop Entrance: A welcome message is given when customers enter a premises.
Speaker (VX-402REC only)
3. MULTI STABILIZED OUTDOOR DETECTOR
Battery Operated ( VX-402R )
The battery operated VX-402R allows for low cost simple outdoor installation, whilst providing exceptional
VX-402REC/402 /402R
voice recording & standard battery
detection capability. warning model model operated model
Battery Saving Circuit
Temperature Compensation
Form C Alarm Output and Tamper Output
Low Current Draw
* Transmitter is not included. Use the commercially available transmitter.
DETECTION PATTERNS SPECIFICATIONS
WIDE ANGLE MODEL VX- 402REC VX-402 VX- 402R
Detection Method Passive Infrared
TOP VIEW
Coverage 12m (40 f t.) 90˚ wide
0 5 10 12 (m)
(ft.) (m) Detection Zones 14 zones
40 12 ADJUSTABLE ZONES Mounting Height 0.8~1.2m (2.7~4f t.)
(15˚ STEP PER NOTCH) Sensitivity 2.0˚ C (3.6˚ F ) at 0.6m/s
10
Detectable Speed 0.3~1.5m/s (1~5f t./s)
30
Power Supply 9.5~18V DC 3~9V DC Alkaline or Lithium Battery
20 Normal 25mA max. 180mA (N.C.) Normal 25mA max. 28mA (N.C.) Max 3mA (Walktest, LED on)
Current Consumption
Normal 12mA max. 200mA (N.O.) Normal 10mA max. 35mA (N.O.) 10uA (Standby)
5
Alarm Period 2 ± 1sec. Approx. 2.5sec.
10
Alarm Output Selectable N.C./N.O.:28V DC 0.2A max. Form C-Solid State Switch:10V DC 0.01A
ACTIVE
DETECTION
Tamper Switch N.C. Opens when cover removed Form C
0 0 ZONES Pulse Count 20 ± 5sec. 2 or 4 Approx. 20sec. 2 or 4
(90˚ WIDE 7 FINGERS) Warm-up Period Approx. 30sec. (LED blinks) Approx. 2min
10 Volume of Audible 75dB -
5 LED is blinking during warm-up period Disable during normal
20 LED Indicator Alarm condition operation
Recording condition - Enable during walk test
30 Weatherproof IP54
10
Operating Temperature -20~+50˚ C (-4~+122˚ F)
40 12 ADJUSTABLE ZONES Operating Humidity 95% max.
(15˚ STEP PER NOTCH)
RF Interference No Alarm 30V/m
0 10 20 30 40 (ft.) Mounting Wall, Pole, Conduit and Electrical Box Wall, Pole
Weight 550g (19.4oz.) 480g (16.9oz.)
Standard Accessories Pole Mount Kit, Screw Kit, Area Masking Plate
SIDE VIEW
Recommended external speaker
Position A (max. 12m)
(ft.) (m) Impedance 8 ohm -
3.3 1
Max. Power over 30W -
0 0
Output S.P.L. over 80dB/m -
0 5 10 12 (m)
0 10 20 30 40 (ft.) Wiring Length 10m -
* Speaker with amplifer can not be used * Only one external speaker can be connected
Position B (max. 8m)
(ft.) (m)
3.3 1 DIMENSIONS
0 0
0 5 10 12 (m) VX-402/402REC VX-402R
0 10 20 30 40 (ft.)
Position C (max. 5m) 80 (3.15) 82 (3.23) 80 (3.15) 108 (4.25)
(ft.) (m)
3.3
0
1
0 Reliable Short-Range Detection for
0 5 10 12 (m)
0 10 20 30 40 (ft.) External Areas
198 (7.8)
198 (7.8)
Position D (max. 2m)
(ft.) (m)
3.3
0
1
0
Ideal for Event Driven CCTV
0 5 10 12 (m)
0 10 20 30 40 (ft.) Applications
*Specifications and design are subject to change without prior notice.
NOTE: This unit is designed to detect movement of an intruder and Two Detection Zones for Superior
activate an alarm control panel. Being only a part of a complete system,
we cannot accept responsibility for any damages or other consequences Stability
resulting from an intrusion. This product conforms to the category
"Residential, Commercial and Light Industry" of EMC Directive 89/336 EEC. mm ( inches )
Any Message Recordable for Each
Application in Any Language
(VX- 402REC)
OPTEX CO., LTD.
(ISO 9001 Certified by LRQA / ISO14001 Certified by JET) Simple wire free installation, with
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL +81(0)77 579 8670 FAX +81(0)77 579 8190 http://www.optex.co.jp/e
OPTEX INCORPORATED (USA) http://www.optexamerica.com
battery operation (VX- 402R)
OPTEX (EUROPE) LTD. (UK) http://www.optexeurope.com
(ISO9001 Certified by NQA)
OPTEX SECURITY SAS (FRANCE) http://www.optex-security.com
OPTEX KOREA CO., LTD. (KOREA) http://www.optexkorea.com
ÒTake Care of the EnvironmentÓ This catalogue uses recycled paper No. 75080-05-909-0503