Voc praint nikavana hai
•Download as DOCX, PDF•
0 likes•185 views
This document contains summer training reports from three students - Puja Tyagi, Lata Kumari, and Nirmala, who are studying electrical engineering. The reports describe their training and observations at the 33/11KV sub-station in Sikandra, Agra, India. Mr. Rajkumar served as their reporting officer during the training.
Report
Share
Report
Share
Recommended
Solar pv charging station for electric vehicles
This document describes a project to design and simulate a solar photovoltaic charging station for electric vehicles using MATLAB/Simulink. The charging station employs a multi-port design to provide constant voltage DC power from the solar panels to charge vehicle batteries using a constant current/constant voltage method. The performance of the charging system is validated through simulation and experimental results. The conclusion discusses opportunities to enhance such systems through optimization techniques, energy storage, intelligent controllers, and hybrid designs incorporating multiple renewable energy sources.
A Multi-Input Bridgeless Resonant AC-DC Converter for Electromagnetic Energy ...
This document proposes a multi-input bridgeless resonant AC-DC converter to efficiently harvest electromagnetic energy from multiple low-voltage generators and condition the output power. The converter uses an LC resonant network to step up the low alternating voltages from each generator before rectification. Its resonant operation enhances efficiency and allows for high frequency switching and miniaturization. Output impedance can be adjusted through resonance impedance matching and pulse-frequency modulation control. Simulation and hardware results validate the converter's ability to harvest energy from multiple low-voltage electromagnetic generators.
Power former
The document discusses a new machine called a "Powerformer" that can generate high voltage electricity more efficiently than conventional power plants. A Powerformer is a generator that uses high voltage cables in its stator winding, allowing it to directly connect to high voltage grids without needing a step-up transformer. This improves efficiency and reduces costs compared to plants that require transformers. The first Powerformer installation was a 11 MVA, 45 kV machine connected to the grid in Sweden. Powerformers offer higher efficiency, lower maintenance costs, and better power transfer from generator to grid than conventional systems.
Smart grid
1) The document discusses a proposed effective power transfer scheme for a grid-connected hybrid wind and photovoltaic system. It aims to minimize the number of converters used and directly ties the PV array to the dc link.
2) The literature review covers past research on hybrid renewable energy systems including a PV-FC system that uses MPPT, a hybrid wind/micro-hydro system with supercapacitor energy storage, and a hybrid AC/DC microgrid with coordination control algorithms.
3) The proposed method uses an SDM controller and STATCOM to compensate for current unbalance from non-linear loads while transferring power from both wind and solar sources to the grid through a single GSC converter. Simulation results
Benefits in moving the intra-array voltage from 33 kV to 66 kV AC for large o...
What are the benefits in moving from 33 kV to 66 kV? Carbon Trust's and Atkins's view
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms.
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms.
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms. Read the paper here:
http://bit.ly/AtkinsWhitepaper
Powerformer ppt presented by b.yedukondalachari
Powerformer ppt presented by b.yedukondalachari from pnc&viet in electrical & electronics engineering department.
IMPACT OF WIND FARM ON POWER SYSTEM DYNAMICS AND STABILITY USING PSAT SIMULATION
. Power contain in the wind is the form of kinetic energy. It is given as following equation as:
P=0.5ρAV^3
Where, ρ= Air density, (kg/m3),
A= Area which is normal to the wind speed (m2),
V = Wind speed (m/s),
P = power of wind
Contigency analysis:
Contingency analysis is a well-known function in modern Energy Management Systems. Contingency Analysis of a power system is a major activity in power system
planning and operation. In general, an outage of one transmission line or transformer may lead to overloads in other branches and/or sudden system voltage
rise or drop. Contingency analysis is used to calculate violations.
Eigen value analysis:
Increasingly, the investigation of the small-signal stability of power systems is considered an important task, complementary to the usual
transient stability investigations. To study the small-signal stability of a power system, eigenvalue analysis is used. In the power systems area,
studying eigenvalues does not have a history as long as that of transient stability analysis and the results are difficult to verify
experimentally. It is therefore important to study the capabilities of a power system dynamics simulation software package used for
small-signal stability analysis carefully, before applying it to practical problems. In this paper, the eigenvalue analysis capabilities
of two power system dynamics simulation software packages are analysed and the results are compared.
N6 kph 2010_part_2a
The document discusses Tesla's wireless transmission system and its application at Bolinas, CA. It includes diagrams and calculations related to the tuning coils, antenna dimensions, aerial constants, antenna layout, scales, and schematics of the system installed at Bolinas, comparing it to Marconi's antenna designs. Calculations and diagrams of the Alexanderson network, shunts, coils, power flow, electrostatic antennas, and model networks are presented.
Recommended
Solar pv charging station for electric vehicles
This document describes a project to design and simulate a solar photovoltaic charging station for electric vehicles using MATLAB/Simulink. The charging station employs a multi-port design to provide constant voltage DC power from the solar panels to charge vehicle batteries using a constant current/constant voltage method. The performance of the charging system is validated through simulation and experimental results. The conclusion discusses opportunities to enhance such systems through optimization techniques, energy storage, intelligent controllers, and hybrid designs incorporating multiple renewable energy sources.
A Multi-Input Bridgeless Resonant AC-DC Converter for Electromagnetic Energy ...
This document proposes a multi-input bridgeless resonant AC-DC converter to efficiently harvest electromagnetic energy from multiple low-voltage generators and condition the output power. The converter uses an LC resonant network to step up the low alternating voltages from each generator before rectification. Its resonant operation enhances efficiency and allows for high frequency switching and miniaturization. Output impedance can be adjusted through resonance impedance matching and pulse-frequency modulation control. Simulation and hardware results validate the converter's ability to harvest energy from multiple low-voltage electromagnetic generators.
Power former
The document discusses a new machine called a "Powerformer" that can generate high voltage electricity more efficiently than conventional power plants. A Powerformer is a generator that uses high voltage cables in its stator winding, allowing it to directly connect to high voltage grids without needing a step-up transformer. This improves efficiency and reduces costs compared to plants that require transformers. The first Powerformer installation was a 11 MVA, 45 kV machine connected to the grid in Sweden. Powerformers offer higher efficiency, lower maintenance costs, and better power transfer from generator to grid than conventional systems.
Smart grid
1) The document discusses a proposed effective power transfer scheme for a grid-connected hybrid wind and photovoltaic system. It aims to minimize the number of converters used and directly ties the PV array to the dc link.
2) The literature review covers past research on hybrid renewable energy systems including a PV-FC system that uses MPPT, a hybrid wind/micro-hydro system with supercapacitor energy storage, and a hybrid AC/DC microgrid with coordination control algorithms.
3) The proposed method uses an SDM controller and STATCOM to compensate for current unbalance from non-linear loads while transferring power from both wind and solar sources to the grid through a single GSC converter. Simulation results
Benefits in moving the intra-array voltage from 33 kV to 66 kV AC for large o...
What are the benefits in moving from 33 kV to 66 kV? Carbon Trust's and Atkins's view
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms.
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms.
Carbon Trust in collaboration with Atkins plc worked on a paper that highlights the potential for higher voltage inter-array systems to deliver significant cost benefits and higher yields to the design of future offshore wind farms. Read the paper here:
http://bit.ly/AtkinsWhitepaper
Powerformer ppt presented by b.yedukondalachari
Powerformer ppt presented by b.yedukondalachari from pnc&viet in electrical & electronics engineering department.
IMPACT OF WIND FARM ON POWER SYSTEM DYNAMICS AND STABILITY USING PSAT SIMULATION
. Power contain in the wind is the form of kinetic energy. It is given as following equation as:
P=0.5ρAV^3
Where, ρ= Air density, (kg/m3),
A= Area which is normal to the wind speed (m2),
V = Wind speed (m/s),
P = power of wind
Contigency analysis:
Contingency analysis is a well-known function in modern Energy Management Systems. Contingency Analysis of a power system is a major activity in power system
planning and operation. In general, an outage of one transmission line or transformer may lead to overloads in other branches and/or sudden system voltage
rise or drop. Contingency analysis is used to calculate violations.
Eigen value analysis:
Increasingly, the investigation of the small-signal stability of power systems is considered an important task, complementary to the usual
transient stability investigations. To study the small-signal stability of a power system, eigenvalue analysis is used. In the power systems area,
studying eigenvalues does not have a history as long as that of transient stability analysis and the results are difficult to verify
experimentally. It is therefore important to study the capabilities of a power system dynamics simulation software package used for
small-signal stability analysis carefully, before applying it to practical problems. In this paper, the eigenvalue analysis capabilities
of two power system dynamics simulation software packages are analysed and the results are compared.
N6 kph 2010_part_2a
The document discusses Tesla's wireless transmission system and its application at Bolinas, CA. It includes diagrams and calculations related to the tuning coils, antenna dimensions, aerial constants, antenna layout, scales, and schematics of the system installed at Bolinas, comparing it to Marconi's antenna designs. Calculations and diagrams of the Alexanderson network, shunts, coils, power flow, electrostatic antennas, and model networks are presented.
high temp superconducting transformer for railway application.ppt
The document summarizes the development of a 1-MVA high-temperature superconducting transformer for railway applications by Siemens from 1996-2001. It describes the design, assembly, testing, and results of the transformer. Key features included a 2-limb core, transposed conductors made of Bi-2223 tape, and a closed cooling system with sub-cooled nitrogen. Electrical and thermal tests confirmed characteristics like a 25% impedance voltage. The conclusion discusses the future potential of HTS transformers for railways through reduced size and increased efficiency over normal conductivity transformers.
Power Electronics Device Circuit Research Projects
Area of Power Electronics
Innovative Topics in Power Electronics
Power Electronics Circuit Projects
Voltage unbalance and harmonics compensation for islanded microgrid inverters
Voltage source inverters (VSIs) are usually used for all kinds of distributed generation interfaces in a microgrid. It is the microgrid’s superiority to power the local loads continuously when the utility fails. When in islanded mode, the voltage and frequency of the microgrid are determined by the VSIs; therefore the power quality can be deteriorated under unbalanced and non-linear loads. A voltage unbalance and harmonics compensation strategy for the VSIs in islanded microgrid is proposed in this study. This method is implemented in a single synchronous reference frame (SRF) and is responsible for both the voltage unbalance and harmonic compensation. Furthermore, the virtual impedance loop is modified to improve the compensation
effect. The impedance model of the VSI is built to explain the compensation ability of the proposed strategy. The whole control system mainly includes power droop controllers, a modified virtual impedance loop and inner SRF-based voltage unbalance and harmonics compensators. The proposed strategy is demonstrated in detail and validated with simulations and experiments.
Vacon case study. Energy and cost efficient ventilation for an Alaskan mine.
CLIENT NAME: Automation Electric and Controls Inc. (distributor)
SEGMENT: HVAC, Mining
PRODUCTS USED: VACON® NXS
LOCATION: Alaska
Grid Integration of PV
This document discusses grid integration challenges with increasing renewable energy and provides solutions. Grid integration of photovoltaics can cause voltage band and thermal limit violations. Traditional solutions involve increasing cable size but new solutions include demand side management, local energy management systems, low voltage transformer tap changing, and reactive power control from inverters. Proper grid planning is now a multi-criteria optimization problem that considers both traditional grid reinforcements and intelligent control solutions.
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
This document discusses using 66kV voltages for offshore wind farm array cables as a way to reduce costs. Higher voltages allow fewer cables to be used to connect turbines over long distances, reducing cable material costs and losses. The document presents analysis showing that converting three sample wind farms from 33kV to 66kV array voltages could reduce cable lengths by up to 45% and losses by up to 46%, demonstrating the potential cost savings of the higher voltage approach. It proposes a design for 66kV array cable systems and notes ongoing testing of these higher voltage cable arrays.
Question bank Electrical Engineering
This document contains questions and answers related to electrical engineering topics. It discusses suburban and long distance railway voltages, total resistance of circuits, differences between isolators and circuit breakers, effects of decreasing field current in DC motors, uses of delta-star transformers for lighting loads, advantages of speed control using thyristors, and advantages of star-delta connected transformers.
SUPERCONDUCTING MAGNETIC ENERGY STORAGE SYSTEM (SMES)
RENEWABLE energy sources will have a key role in supplying energy in the future. There are several issues regarding large scale integration of new renewable into the power system. One of the problems is the security of supply. These energy sources will provide energy, or not provide, independent of the demand. The output power can also have relatively large variations within a short time span. A solution to this problem is the concept of energy storage, and there are several different concepts. There are devices which can store large amounts of energy, but do not react so fast. In the other end there are fast acting devices which store smaller amounts of energy.
Gas insulated transmission line
This document discusses gas insulated transmission lines (GIL). GIL uses gas insulation to allow for high voltage power transmission in a compact size. It can be installed aboveground, vertically, in tunnels, or via direct burial. Key advantages of GIL include high transmission capacity and reliability in a compact form that has low environmental and safety impacts. The document provides specifications of GIL systems and discusses their use for long distance power transmission, including future applications like offshore wind farms and improved urban power supply.
Uttar Pradesh Power Corparation Ltd. Training Report
The document is a summer training report submitted by Amit Kumar to fulfill the requirements for a Bachelor of Technology degree in Electrical Engineering. It details his study of the 132/33kV and 132/11kV substation located in Lucknow, India. The report provides information on the key components of the substation, including transformers rated at 63MVA and 20MVA, SF6 and VCB circuit breakers, current and potential transformers, lightning arrestors, isolators, conductor buses, and control panels. It also includes single line diagrams, photographs of equipment, and technical specifications. The aim is to gain exposure to modern substation practices to support the electrical engineering curriculum.
sine-wave-bldc
The document discusses sine wave brushless DC motors (BLDCM). It explains that sine wave BLDCMs have a sinusoidal distribution of magnet flux in the air gap and quasi-sinusoidal current waveforms, unlike square wave BLDCMs which have a rectangular distribution of flux and currents. The document also covers topics like torque and EMF equations, phasor diagrams, torque-speed characteristics, and synchronous reactance for sine wave BLDCMs.
IE UNIT1.ppt
This document discusses power diodes and their characteristics. It begins with an introduction to power diodes, describing how they are made suitable for high current and voltage applications. Characteristics like the voltage-current relationship are examined for signal diodes, power diodes, and ideal diodes. Reverse recovery characteristics are also covered. Different types of power diodes like general purpose, fast recovery, and Schottky diodes are defined. Assessment questions are included throughout to test understanding. References for further reading are provided at the end.
Raji_Profile2015_Oct_new
This curriculum vitae outlines the educational and professional experience of Mustapha Iyanda Raji. He holds an MSc in Renewable Energy Systems Engineering from the University of Surrey in the UK and a BEng in Electrical and Electronics Engineering from the University of Agriculture Abeokuta in Nigeria. Professionally, he has over 5 years of experience working in protective relaying, instrumentation, and substation maintenance with the Transmission Company of Nigeria. He is a member of several professional engineering bodies and has received additional training in protection relay systems.
EU skills - City and Guilds update - Ronnie Moore
This document provides a progress report on City & Guilds qualifications in Electrical Power Engineering. It lists qualifications that have already closed for registration and certification, qualifications that are being extended, and qualifications that are undergoing Technical and Qualification Transfer (TQT) to ensure they remain relevant. Qualifications cover areas like power plant maintenance, distribution and transmission, substation plant, wind turbine operations and maintenance, and overhead lines. Registration and certification dates are provided for each qualification.
HV Skills Update - Ronnie Moore, EU Skills
This document provides a progress report on City & Guilds qualifications in Electrical Power Engineering. It lists qualifications that have already closed for registration and certification, qualifications that are being extended, and qualifications that are undergoing Technical and Qualification Transfer (TQT) processes. Qualifications cover areas like power plant maintenance, distribution and transmission, substation plant, wind turbine operations and maintenance, and overhead line roles. Registration and certification dates are provided for each qualification.
Final - speaker impedance matching in audio system
The document is from SNS College of Technology about a consumer electronics course covering speaker impedance matching. It provides information on the college, department, course, semester, unit, and topic which is speaker impedance matching. An outline is given but no further details on the content.
Geomagnetic storms and power system
The document discusses the effects of geomagnetic storms on power systems. Geomagnetic storms are caused when coronal mass ejections from the sun interact with the Earth's magnetosphere. This interaction can induce geomagnetically induced currents in long-distance power lines that can cause equipment damage, power outages, and blackouts. Key impacts include transformer heating, damage from harmonic currents, increased reactive power consumption, and protection system malfunctions. Case studies of historical geomagnetic storms that caused power outages are presented. Approaches to mitigate risks include installing blocking devices, power flow management, and load shedding.
Geomagnetic storms and power system Report
This report is about Geomagnetic storms, geomagnetic induced current, its causes and its effect on power system equipment.
Final - Working of a Projector IN REAL TIME APPLCIATIONS
The document discusses a lesson on the working of projectors. It provides information on a class called 19ECO301 Consumer Electronics taught at SNS College of Technology. The class is part of the Electronics and Communication Engineering department. The document outlines the topic of how projectors function for a class project.
From Macroscopic to Microscopic Dynamics of Superconducting Cavities
These slides present the results from the thesis with the same name as the presentation title. It deals with operational aspects of superconducting (SC) accelerating cavities related to charging the same. It proposes an optimal scheme to charge the SC cavities such that the total reflected energy is minimised. Following which it presents a way of extending the well known Q-circle method to SC cavities for accurate estimation of cavity quality factor (Q0). The measurements reveal the effect of cool down on cavity Q0. Present literature proposed the effect of trapped magnetic field in surface impurities. In the thesis I use the Ginzburg-Landau model of superconductivity to theoretically explain the effect of magnetic field, impurity and temperature gradient. This allows a theoretical model that explains the experimental results.
TO BECOME A GOOD ELECTRICAL CONTRACTOR
This technical presentation provides information to engineering graduates about obtaining an 'A' class electrical license in Madhya Pradesh. It outlines the process for obtaining licenses to work as a wireman, supervisor, and contractor. It also discusses important standards and acts related to electrical work, including clearance requirements. The presentation reviews the exam process and references needed to become a licensed supervisor. It concludes with discussing project work, including tendering, estimation, planning, execution, testing, handover, and liasioning.
Final - Typical Generator in electronics domain
The document is from SNS College of Technology's Department of Electronics and Communication Engineering. It discusses the topic of typical generators as part of a third year course on consumer electronics. The document was created by Raja S AP on March 31, 2024 and provides an outline for a lesson on typical generators used in electronic music synthesizers.
More Related Content
What's hot
high temp superconducting transformer for railway application.ppt
The document summarizes the development of a 1-MVA high-temperature superconducting transformer for railway applications by Siemens from 1996-2001. It describes the design, assembly, testing, and results of the transformer. Key features included a 2-limb core, transposed conductors made of Bi-2223 tape, and a closed cooling system with sub-cooled nitrogen. Electrical and thermal tests confirmed characteristics like a 25% impedance voltage. The conclusion discusses the future potential of HTS transformers for railways through reduced size and increased efficiency over normal conductivity transformers.
Power Electronics Device Circuit Research Projects
Area of Power Electronics
Innovative Topics in Power Electronics
Power Electronics Circuit Projects
Voltage unbalance and harmonics compensation for islanded microgrid inverters
Voltage source inverters (VSIs) are usually used for all kinds of distributed generation interfaces in a microgrid. It is the microgrid’s superiority to power the local loads continuously when the utility fails. When in islanded mode, the voltage and frequency of the microgrid are determined by the VSIs; therefore the power quality can be deteriorated under unbalanced and non-linear loads. A voltage unbalance and harmonics compensation strategy for the VSIs in islanded microgrid is proposed in this study. This method is implemented in a single synchronous reference frame (SRF) and is responsible for both the voltage unbalance and harmonic compensation. Furthermore, the virtual impedance loop is modified to improve the compensation
effect. The impedance model of the VSI is built to explain the compensation ability of the proposed strategy. The whole control system mainly includes power droop controllers, a modified virtual impedance loop and inner SRF-based voltage unbalance and harmonics compensators. The proposed strategy is demonstrated in detail and validated with simulations and experiments.
Vacon case study. Energy and cost efficient ventilation for an Alaskan mine.
CLIENT NAME: Automation Electric and Controls Inc. (distributor)
SEGMENT: HVAC, Mining
PRODUCTS USED: VACON® NXS
LOCATION: Alaska
Grid Integration of PV
This document discusses grid integration challenges with increasing renewable energy and provides solutions. Grid integration of photovoltaics can cause voltage band and thermal limit violations. Traditional solutions involve increasing cable size but new solutions include demand side management, local energy management systems, low voltage transformer tap changing, and reactive power control from inverters. Proper grid planning is now a multi-criteria optimization problem that considers both traditional grid reinforcements and intelligent control solutions.
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
This document discusses using 66kV voltages for offshore wind farm array cables as a way to reduce costs. Higher voltages allow fewer cables to be used to connect turbines over long distances, reducing cable material costs and losses. The document presents analysis showing that converting three sample wind farms from 33kV to 66kV array voltages could reduce cable lengths by up to 45% and losses by up to 46%, demonstrating the potential cost savings of the higher voltage approach. It proposes a design for 66kV array cable systems and notes ongoing testing of these higher voltage cable arrays.
Question bank Electrical Engineering
This document contains questions and answers related to electrical engineering topics. It discusses suburban and long distance railway voltages, total resistance of circuits, differences between isolators and circuit breakers, effects of decreasing field current in DC motors, uses of delta-star transformers for lighting loads, advantages of speed control using thyristors, and advantages of star-delta connected transformers.
SUPERCONDUCTING MAGNETIC ENERGY STORAGE SYSTEM (SMES)
RENEWABLE energy sources will have a key role in supplying energy in the future. There are several issues regarding large scale integration of new renewable into the power system. One of the problems is the security of supply. These energy sources will provide energy, or not provide, independent of the demand. The output power can also have relatively large variations within a short time span. A solution to this problem is the concept of energy storage, and there are several different concepts. There are devices which can store large amounts of energy, but do not react so fast. In the other end there are fast acting devices which store smaller amounts of energy.
Gas insulated transmission line
This document discusses gas insulated transmission lines (GIL). GIL uses gas insulation to allow for high voltage power transmission in a compact size. It can be installed aboveground, vertically, in tunnels, or via direct burial. Key advantages of GIL include high transmission capacity and reliability in a compact form that has low environmental and safety impacts. The document provides specifications of GIL systems and discusses their use for long distance power transmission, including future applications like offshore wind farms and improved urban power supply.
What's hot (9)
high temp superconducting transformer for railway application.ppt
high temp superconducting transformer for railway application.ppt
Power Electronics Device Circuit Research Projects
Power Electronics Device Circuit Research Projects
Voltage unbalance and harmonics compensation for islanded microgrid inverters
Voltage unbalance and harmonics compensation for islanded microgrid inverters
Vacon case study. Energy and cost efficient ventilation for an Alaskan mine.
Vacon case study. Energy and cost efficient ventilation for an Alaskan mine.
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
66kV Offshore Wind Farm - Wet Design for Higher Voltage Wind Farm Applications
SUPERCONDUCTING MAGNETIC ENERGY STORAGE SYSTEM (SMES)
SUPERCONDUCTING MAGNETIC ENERGY STORAGE SYSTEM (SMES)
Similar to Voc praint nikavana hai
Uttar Pradesh Power Corparation Ltd. Training Report
The document is a summer training report submitted by Amit Kumar to fulfill the requirements for a Bachelor of Technology degree in Electrical Engineering. It details his study of the 132/33kV and 132/11kV substation located in Lucknow, India. The report provides information on the key components of the substation, including transformers rated at 63MVA and 20MVA, SF6 and VCB circuit breakers, current and potential transformers, lightning arrestors, isolators, conductor buses, and control panels. It also includes single line diagrams, photographs of equipment, and technical specifications. The aim is to gain exposure to modern substation practices to support the electrical engineering curriculum.
sine-wave-bldc
The document discusses sine wave brushless DC motors (BLDCM). It explains that sine wave BLDCMs have a sinusoidal distribution of magnet flux in the air gap and quasi-sinusoidal current waveforms, unlike square wave BLDCMs which have a rectangular distribution of flux and currents. The document also covers topics like torque and EMF equations, phasor diagrams, torque-speed characteristics, and synchronous reactance for sine wave BLDCMs.
IE UNIT1.ppt
This document discusses power diodes and their characteristics. It begins with an introduction to power diodes, describing how they are made suitable for high current and voltage applications. Characteristics like the voltage-current relationship are examined for signal diodes, power diodes, and ideal diodes. Reverse recovery characteristics are also covered. Different types of power diodes like general purpose, fast recovery, and Schottky diodes are defined. Assessment questions are included throughout to test understanding. References for further reading are provided at the end.
Raji_Profile2015_Oct_new
This curriculum vitae outlines the educational and professional experience of Mustapha Iyanda Raji. He holds an MSc in Renewable Energy Systems Engineering from the University of Surrey in the UK and a BEng in Electrical and Electronics Engineering from the University of Agriculture Abeokuta in Nigeria. Professionally, he has over 5 years of experience working in protective relaying, instrumentation, and substation maintenance with the Transmission Company of Nigeria. He is a member of several professional engineering bodies and has received additional training in protection relay systems.
EU skills - City and Guilds update - Ronnie Moore
This document provides a progress report on City & Guilds qualifications in Electrical Power Engineering. It lists qualifications that have already closed for registration and certification, qualifications that are being extended, and qualifications that are undergoing Technical and Qualification Transfer (TQT) to ensure they remain relevant. Qualifications cover areas like power plant maintenance, distribution and transmission, substation plant, wind turbine operations and maintenance, and overhead lines. Registration and certification dates are provided for each qualification.
HV Skills Update - Ronnie Moore, EU Skills
This document provides a progress report on City & Guilds qualifications in Electrical Power Engineering. It lists qualifications that have already closed for registration and certification, qualifications that are being extended, and qualifications that are undergoing Technical and Qualification Transfer (TQT) processes. Qualifications cover areas like power plant maintenance, distribution and transmission, substation plant, wind turbine operations and maintenance, and overhead line roles. Registration and certification dates are provided for each qualification.
Final - speaker impedance matching in audio system
The document is from SNS College of Technology about a consumer electronics course covering speaker impedance matching. It provides information on the college, department, course, semester, unit, and topic which is speaker impedance matching. An outline is given but no further details on the content.
Geomagnetic storms and power system
The document discusses the effects of geomagnetic storms on power systems. Geomagnetic storms are caused when coronal mass ejections from the sun interact with the Earth's magnetosphere. This interaction can induce geomagnetically induced currents in long-distance power lines that can cause equipment damage, power outages, and blackouts. Key impacts include transformer heating, damage from harmonic currents, increased reactive power consumption, and protection system malfunctions. Case studies of historical geomagnetic storms that caused power outages are presented. Approaches to mitigate risks include installing blocking devices, power flow management, and load shedding.
Geomagnetic storms and power system Report
This report is about Geomagnetic storms, geomagnetic induced current, its causes and its effect on power system equipment.
Final - Working of a Projector IN REAL TIME APPLCIATIONS
The document discusses a lesson on the working of projectors. It provides information on a class called 19ECO301 Consumer Electronics taught at SNS College of Technology. The class is part of the Electronics and Communication Engineering department. The document outlines the topic of how projectors function for a class project.
From Macroscopic to Microscopic Dynamics of Superconducting Cavities
These slides present the results from the thesis with the same name as the presentation title. It deals with operational aspects of superconducting (SC) accelerating cavities related to charging the same. It proposes an optimal scheme to charge the SC cavities such that the total reflected energy is minimised. Following which it presents a way of extending the well known Q-circle method to SC cavities for accurate estimation of cavity quality factor (Q0). The measurements reveal the effect of cool down on cavity Q0. Present literature proposed the effect of trapped magnetic field in surface impurities. In the thesis I use the Ginzburg-Landau model of superconductivity to theoretically explain the effect of magnetic field, impurity and temperature gradient. This allows a theoretical model that explains the experimental results.
TO BECOME A GOOD ELECTRICAL CONTRACTOR
This technical presentation provides information to engineering graduates about obtaining an 'A' class electrical license in Madhya Pradesh. It outlines the process for obtaining licenses to work as a wireman, supervisor, and contractor. It also discusses important standards and acts related to electrical work, including clearance requirements. The presentation reviews the exam process and references needed to become a licensed supervisor. It concludes with discussing project work, including tendering, estimation, planning, execution, testing, handover, and liasioning.
Final - Typical Generator in electronics domain
The document is from SNS College of Technology's Department of Electronics and Communication Engineering. It discusses the topic of typical generators as part of a third year course on consumer electronics. The document was created by Raja S AP on March 31, 2024 and provides an outline for a lesson on typical generators used in electronic music synthesizers.
SSC-JE-Syllabus_PYQ_All about SSC JE.pptx
The document discusses the SSC JE 2023 exam. It lists 21 Junior Engineer posts across various organizations like the Central Water Commission, Central Public Works Department, Military Engineer Services, etc. It also provides information on the SSC JE exam pattern for paper 1, links to SSC JE question papers from previous years, and a syllabus PDF file to help candidates prepare for the exam. Overall, the document provides details on the various JE posts available through SSC in 2023 and resources for candidates to study for the recruitment exam.
Ranjan Roy- 12.12.16
This document contains contact and professional experience details of Ranjan Kumar Roy. It details his 24.5 years of experience in electrical and instrumentation engineering, procurement, erection and commissioning works for various thermal power projects. It lists his roles and responsibilities in previous companies like Tecpro Systems Ltd., NMSEZ Pvt. Ltd., Mahindra Ashtech Limited and Desein & Indure Group of Companies working as Deputy General Manager, Senior Manager, Manager and Senior Electrical Engineer respectively. It also provides details of various power plant projects he has worked on in these roles.
Similar to Voc praint nikavana hai (15)
Uttar Pradesh Power Corparation Ltd. Training Report
Uttar Pradesh Power Corparation Ltd. Training Report
Final - speaker impedance matching in audio system
Final - speaker impedance matching in audio system
Final - Working of a Projector IN REAL TIME APPLCIATIONS
Final - Working of a Projector IN REAL TIME APPLCIATIONS
From Macroscopic to Microscopic Dynamics of Superconducting Cavities
From Macroscopic to Microscopic Dynamics of Superconducting Cavities
Recently uploaded
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
Nucleic Acid-its structural and functional complexity.
This presentation explores a brief idea about the structural and functional attributes of nucleotides, the structure and function of genetic materials along with the impact of UV rays and pH upon them.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
bordetella pertussis.................................ppt
Bordettela is a gram negative cocobacilli spread by air born drop let
ANAMOLOUS SECONDARY GROWTH IN DICOT ROOTS.pptx
Abnormal or anomalous secondary growth in plants. It defines secondary growth as an increase in plant girth due to vascular cambium or cork cambium. Anomalous secondary growth does not follow the normal pattern of a single vascular cambium producing xylem internally and phloem externally.
20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
What is greenhouse gasses and how many gasses are there to affect the Earth.
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.
原版制作(carleton毕业证书)卡尔顿大学毕业证硕士文凭原版一模一样
原版纸张【微信：741003700 】【(carleton毕业证书)卡尔顿大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/Recently uploaded (20)
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Nucleic Acid-its structural and functional complexity.
Nucleic Acid-its structural and functional complexity.
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...
bordetella pertussis.................................ppt
bordetella pertussis.................................ppt
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
What is greenhouse gasses and how many gasses are there to affect the Earth.
What is greenhouse gasses and how many gasses are there to affect the Earth.
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Voc praint nikavana hai
- 1. VOC - SUMMER TRANING REPORT ON PLANNING & DISTRIBUTION POWER FROM 33/11KV SUB – STATION ( SIKANDRA ) SUBMITTED BY – PUJA TYAGI BRANCH – ELECTRICAL ENGINEERING DIPLOMA 2ND YEAR D.E.I TECHNICAL COLLAGE , DAYAIBAGH , AGRA, U.P (REPOTING OFFICER –Mr.RAJKUMAR ) (JUNIOR ENGINEERING 33/11KV SUBSTATION , SIKANDRA , AGRA )
- 2. VOC - SUMMER TRANING REPORT ON PLANNING & DISTRIBUTION POWER FROM 33/11KV SUB – STATION ( SIKANDRA ) SUBMITTED BY – LATA KUMARI BRANCH – ELECTRICAL ENGINEERING DIPLOMA 2ND YEAR D.E.I TECHNICAL COLLAGE , DAYAIBAGH , AGRA, U.P (REPOTING OFFICER –Mr.RAJKUMAR ) (JUNIOR ENGINEERING 33/11KV SUBSTATION , SIKANDRA , AGRA )
- 3. VOC - SUMMER TRANING REPORT ON PLANNING & DISTRIBUTION POWER FROM 33/11KV SUB – STATION ( SIKANDRA ) SUBMITTED BY – NIRMALA BRANCH – ELECTRICAL ENGINEERING DIPLOMA 2ND YEAR D.E.I TECHNICAL COLLAGE , DAYAIBAGH , AGRA, U.P (REPOTING OFFICER –Mr. RAJKUMAR ) (JUNIOR ENGINEERING 33/11KV SUBSTATION , SIKANDRA , AGRA )