A wide variety of angle valves,valves,vent valves , vessels , stirrers , heat exchangers are described in this section. All the valves are made of Borosilicate
Glass body & PTFE plug so that process fluid just comes in contact with Glass & PTFE only.
Borosilicate Glass body permits the visual checking of the operation.
Tuning forks, with their stable resonant frequency, have been applied in numerous ways throughout many years. A modern application in industrial process control is the vibrating tuning fork level switch.The Jerguson Series 200 is a single point level switch which may be installed in any position in a pipe or vessel to detect the presence of a liquid.
The Series 200 employs a tuning fork style probe which vibrates at its natural frequency when in air. A piezoelectric crystal-system
is used to create a 1100 Hz vibration in the tuning fork. As the
tuning fork is covered by a liquid or slurry, a corresponding
shift occurs in the vibrating frequency of the tuning fork. This
shift is being monitored continuously and once a present threshold is exceeded, the output changes status.
From its beginnings in 1966, Kammer valves have been engineered and manufactured for specific answers to tough applications. Although, more than half of all Kammer valves are custom designed, custom applications often do not require additional time or cost due to the versatility and interchangeability of the Kammer design.
Flowserve Valtek Mark One Control ValveSwanson Flo
The Valtek Mark One globe control valve offers superior performance in liquid and gaseous services, while also permitting easy, fast and inexpensive maintenance.
For applications where rapid transition from open to closed positions is warranted, the Mark 76 is a solid choice. Designed with a short stroke and straight through fluid path, the Mark 76 also incorporates other features to assure good service for process operations using on/off control.
500 Series Thermoelectric Gas Cooler | Universal AnalyzersNeha Gupta
The Series 500 Sample Coolers are our moderate capacity thermoelectric coolers. They provide a self-regulated 4.0°C dew point gas sample. The 500 Series Coolers condense the water from a wet gas sample with minimal loss of the water soluble gas fraction. To know more visit: https://www.universalanalyzers.com/products/gas-sample-coolers/500-series-cooler
Canawest Technologies Inc. offers premium quality butterfly valve in various designs such as, high pressure, high temperature and high sealing performance designs. Butterfly valve mainly used for segregating or regulating flow of water. For more details, visit: http://cwtvalve.com/butterfly-valve/.
Tuning forks, with their stable resonant frequency, have been applied in numerous ways throughout many years. A modern application in industrial process control is the vibrating tuning fork level switch.The Jerguson Series 200 is a single point level switch which may be installed in any position in a pipe or vessel to detect the presence of a liquid.
The Series 200 employs a tuning fork style probe which vibrates at its natural frequency when in air. A piezoelectric crystal-system
is used to create a 1100 Hz vibration in the tuning fork. As the
tuning fork is covered by a liquid or slurry, a corresponding
shift occurs in the vibrating frequency of the tuning fork. This
shift is being monitored continuously and once a present threshold is exceeded, the output changes status.
From its beginnings in 1966, Kammer valves have been engineered and manufactured for specific answers to tough applications. Although, more than half of all Kammer valves are custom designed, custom applications often do not require additional time or cost due to the versatility and interchangeability of the Kammer design.
Flowserve Valtek Mark One Control ValveSwanson Flo
The Valtek Mark One globe control valve offers superior performance in liquid and gaseous services, while also permitting easy, fast and inexpensive maintenance.
For applications where rapid transition from open to closed positions is warranted, the Mark 76 is a solid choice. Designed with a short stroke and straight through fluid path, the Mark 76 also incorporates other features to assure good service for process operations using on/off control.
500 Series Thermoelectric Gas Cooler | Universal AnalyzersNeha Gupta
The Series 500 Sample Coolers are our moderate capacity thermoelectric coolers. They provide a self-regulated 4.0°C dew point gas sample. The 500 Series Coolers condense the water from a wet gas sample with minimal loss of the water soluble gas fraction. To know more visit: https://www.universalanalyzers.com/products/gas-sample-coolers/500-series-cooler
Canawest Technologies Inc. offers premium quality butterfly valve in various designs such as, high pressure, high temperature and high sealing performance designs. Butterfly valve mainly used for segregating or regulating flow of water. For more details, visit: http://cwtvalve.com/butterfly-valve/.
GWC Valve International small floating threaded and socketweld valves are available in high pressure up to 6000 psi as well as general use commodity application.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
La válvula de mariposa es una válvula que puede ser utilizada para servicio ON/OFF o para regular el flujo. El mecanismo de cierre tiene forma de disco. El funcionamiento es similar al de la válvula de bola, ya que permite un cierre rápido con un giro de 90º.
The butterfly valve can be used for ON/OFF service or to regulate flow. The closing mechanism has a disk shape. Operates like a ball valve, allowing fast closing with a 90º turn.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
GWC Valve International produces a wide variety of Cast Steel Gate, Globe, and Check valves. Other available designs include cast steel angle valves, O-ring seal block and bleed gate valves and cryogenic valves.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
Jordan Valve Mark 80 Self Operated Temperature RegulatorSwanson Flo
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has high rangebility and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Measuring level of liquid in a tank or vessel can be accomplished in a number of ways, all of which require some arrangement of instrumentation to either infer the liquid level from the measurement of a related physical property, or directly deliver the liquid level visually using a scaled gauge arrangement. One indirect method of level measurement is the bubbler method, so named because it employs a purging gas that continually vents from the bottom of a tube extending into a tank of liquid. Through a simple apparatus, the level of a liquid can be inferred by the amount a back pressure exerted upon the gas flowing through the tube.
These instruments are what will be required to build a level measurement apparatus that uses the bubbler method.
Product guide for industrial gauges from Ametek U.S. GaugeMiller Energy, Inc.
U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges, diaphragm seals, temperature gauges and thermowell fittings. The product line includes a wide range of gauges, from vacuum pressure to a 23,000 psi gauge pressure device, in single or dual scale dials. Gauge sizes range from 1-1/2 inches to 6 inches, with brass, 316 stainless steel, or Monel internals. USG offers a complete range of options for all the above products, such as a gauge snubber, Sta-Kool cooling element, siphon, over-pressure protector, and much more.
GWC line of Triple Offset Butterfly valves are available in a wide range of pressure class, materials and body configurations. This product is designed for Bi-directional Bubble Tight Shutoff being fully engineered and manufactured to exceed our clients stringent process requirements.
The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.
couplings | sight glass | structure and supportsGoel Scientific
Adaptor backing flanges are used to couple a glass end to the flange having different bolt
configuration. These flanges are made of cast iron and are supplied with inserts.
These are particularly used to fit a glass equipment on a non-glass equipment like Glass-lined
Reactor etc.
Permissible temperature range for both shell & tube sides - 40 C to 150 C
0 Maximum permissible temperature difference between shell & tube sides 120 C
All sizes & models are suitable for full vacuum on both side. Maximum limiting pressures are
tabulated.
GWC Valve International small floating threaded and socketweld valves are available in high pressure up to 6000 psi as well as general use commodity application.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
La válvula de mariposa es una válvula que puede ser utilizada para servicio ON/OFF o para regular el flujo. El mecanismo de cierre tiene forma de disco. El funcionamiento es similar al de la válvula de bola, ya que permite un cierre rápido con un giro de 90º.
The butterfly valve can be used for ON/OFF service or to regulate flow. The closing mechanism has a disk shape. Operates like a ball valve, allowing fast closing with a 90º turn.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
GWC Valve International produces a wide variety of Cast Steel Gate, Globe, and Check valves. Other available designs include cast steel angle valves, O-ring seal block and bleed gate valves and cryogenic valves.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
Magnatrol Valve provides high quality bronze and stainless steel solenoid valves, temperatures to 400F, pressures to 500 PSI, for control of water, oil, steam, air, gas, cryogenics, solvents, oxygen, and corrosive fluids.
Jordan Valve Mark 80 Self Operated Temperature RegulatorSwanson Flo
The Mark 80 Series Temperature Regulator features the advanced sliding gate seat technology pioneered by Jordan Valve. Using the Jordan Valve sliding gate seat technology, the Mark 80 temperature regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Jordan Valve Mark 80 has high rangebility and extremely accurate regulation. The proprietary Jorcote seat material is extremely hard (@RC85) with a low coefficient of friction that delivers outstanding performance and long service life.
Measuring level of liquid in a tank or vessel can be accomplished in a number of ways, all of which require some arrangement of instrumentation to either infer the liquid level from the measurement of a related physical property, or directly deliver the liquid level visually using a scaled gauge arrangement. One indirect method of level measurement is the bubbler method, so named because it employs a purging gas that continually vents from the bottom of a tube extending into a tank of liquid. Through a simple apparatus, the level of a liquid can be inferred by the amount a back pressure exerted upon the gas flowing through the tube.
These instruments are what will be required to build a level measurement apparatus that uses the bubbler method.
Product guide for industrial gauges from Ametek U.S. GaugeMiller Energy, Inc.
U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges, diaphragm seals, temperature gauges and thermowell fittings. The product line includes a wide range of gauges, from vacuum pressure to a 23,000 psi gauge pressure device, in single or dual scale dials. Gauge sizes range from 1-1/2 inches to 6 inches, with brass, 316 stainless steel, or Monel internals. USG offers a complete range of options for all the above products, such as a gauge snubber, Sta-Kool cooling element, siphon, over-pressure protector, and much more.
GWC line of Triple Offset Butterfly valves are available in a wide range of pressure class, materials and body configurations. This product is designed for Bi-directional Bubble Tight Shutoff being fully engineered and manufactured to exceed our clients stringent process requirements.
The Model 1078 is a pilot-operated valve, specifically designed to reduce blanketing gas losses on lowpressure storage tanks. It opens and closes automatically as required, to maintain a closely controlled blanket pressure. The simple design, increases reliability and lowers maintenance cost.
couplings | sight glass | structure and supportsGoel Scientific
Adaptor backing flanges are used to couple a glass end to the flange having different bolt
configuration. These flanges are made of cast iron and are supplied with inserts.
These are particularly used to fit a glass equipment on a non-glass equipment like Glass-lined
Reactor etc.
Permissible temperature range for both shell & tube sides - 40 C to 150 C
0 Maximum permissible temperature difference between shell & tube sides 120 C
All sizes & models are suitable for full vacuum on both side. Maximum limiting pressures are
tabulated.
Goel Scientific General information and introductionGoel Scientific
Borosilicate glass represents unmatched standardized glass for construction of plant
and piping in the chemical, dyestuff, food pharmaceutical, petrochemical industries. Its
steadily growing use is due to many advantages over conventional materials.
Our passion for innovation, insist us to utilize our glass fabrication
expertise and experience of almost five decades in the area of
borosilicate glass to make the world more beautiful. We are
introducing first time in the world a patented concept (prov.) to
provide Glass decoration system like Table, Furniture, Ralings,
Fountains, Aquariums etc. with 100% Glass, for relaxation of most
royal people of the world.
standard units | multi purpose unit | falling film absorberGoel Scientific
The liquid to be extracted is poured into an extraction vessel. Solvent is boiled in
a reboiler vessel and condensed in an overhead condenser, the condensed liquid
collecting in a reflux divider and passing through pipework to the extraction
vessel. The pipework incorporates valves in order that the solvent can enter the
extraction vessel at either the base of the top, depending on the relative
densities of the solvent and liquid to be extracted. The solvent and the extracted
liquid pass back to the reboiler and the process is repeated until the extraction is
complete. The extraction vessel is then drained and the solvent evaporated from
the reboiler vessel and collected in the extraction vessel enabling the two liquids
to be drained from their respective vessels.
Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
Cooling capacity: 51.1 ÷ 306.6 kW
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Kseniya Leshchenko: Shared development support service model as the way to ma...
VALVES
1. VALVES
A wide variety of valves are described in this section. All the valves are made of Borosilicate
Glass body & PTFE plug so that process fluid just comes in contact with Glass & PTFE only.
BorosilicateGlassbodypermitsthevisualcheckingoftheoperation.
All the valves are suitable for operation under full vacuum conditions & a maximum
temperatureof200'C.
BorosilicateValvesareavailablefromDN25toDN50.
Biggersizevalvesareavailableonrequest.
2. R
17
STRAIGHT THROUGH VALVES
VALVES
Cat.Ref. DN DN1 d L H
PV0.7 15 15 10 125 125
PV1* 25 25 18 175 175
PV1.5/1 40 25 18 225 175
PV1.5* 40 40 26 225 200
PV2 50 50 38 300 220
Spindles are made of PTFE.
DRAIN VALVES
Cat.Ref. DN DN1 d L H D
PVD0.7 15 15 10 125 125 15
PVD1* 25 25 18 175 175 28
PVD1.5/1* 40 25 18 225 175 28
PVD1.5* 40 40 26 225 200 42
PVD2 50 50 38 300 220 50
Cat.Ref. DN DN1 d L H Degree
PVE0.7 15 15 10 50 85 90
PVE1* 25 25 18 100 175 90
PVE1/80* 25 25 18 100 175 80
PVE1.5 40 40 26 150 200 90
PVE2 50 50 38 150 220 90
ANGLE VALVES
VENT VALVES
Cat.Ref. DN D d L L1
PVV0.7 15 11 10 125 -
PVV1* 25 11 10 150 85
PVV1.5 40 11 10 150 95
H
L
DN
DN1
DN
d
D
d
L
DN
DN1
H
L
H
L
DN
DN
DN1 80°
L
DN
L1
D
d d
d
3. Cat.Ref. DN D d L L1 L2 L3
PVW 1/07 25 12 10 280 55 85 160
PVW 1.5/07 40 12 10 280 65 85 160
R
18
VENT / VACUUM VALVES
BOTTOM OUTLET VALVES
These valves prevent the accumulation of solids or liquid in the bottom outlet of a vessel.
This valve can be incorporated in any spherical or cylindrical vessel.
Cat.Ref. DN DN1 DN2 d L L1 L2 B
BAL1 25 25 25 18 260 105 150 190
BAL1.5* 40 25 25 26 260 105 150 190
BAL2 50 40 25 38 260 105 150 190
VALVES
L2
D
DN
L3
L
L
L1
DN
DN1
DN1
B
45°
L2
d
d
5. R
19
SPHERICAL VESSEL - General Data
VESSELS
Nominal Bulb Working Maximum
Capacity Cap. Cap. Pressure
(Ltrs.) (Ltrs.) (Ltrs.) (Bar)
5 5 4 1
10 10 9 0.8
20 21 20 0.7
50 62 58 0.5
100 118 111 0.4
200 212 200 0.3
300 300 300 0.2
500 500 500 0.1
Nominal
Capacity L D DN T DN1 B DN2 P DN3 S
(Ltrs.)
5 425 223 50 85 25 125 25 50 40 75
10 500 285 80 100 25 125 25 50 40 75
20 575 350 100 100 25 125 25 50 40 75
50 800 490 150 150 40 200 40 75 100 100
100 900 600 225 150 40 200 40 75 100 100
200 1100 750 300 250 40 200 40 75 100 100
300 1175 860 400 250 50 175 50 75 100 100
500 1400 1000 450 250 50 200 50 75 150 165
SINGLE NECK SPHERICAL VESSELS
Cat. Nominal
Ref. Capacity L DN
VSA5 5 L 300 50
VSA10 10 L 375 80
VSA20 20 L 450 100
VSA50 50 L 600 150
VSA100 100 L 700 225
VSA200 200 L 900 300
VSA300 300 L 1000 400
VSA500 500 L 1200 450
THREE NECK BOTTOM OUTLET SPHERICAL VESSELS
Cat. Nominal
Ref. Capacity L DN DN1 DN2
VSM5 5 L 450 50 25 25
VSM10 10 L 500 80 25 25
VSM20 20 L 575 100 25 25
VSM50 50 L 800 150 40 40
VSM100 100 L 900 225 40 40
VSM200 200 L 1100 300 40 40
VSM300 300 L 1175 400 50 50
VSM500 500 L 1400 450 50 50
FOUR NECK BOTTOM OUTLET SPHERICAL VESSELS
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VSPL5 5 L 425 50 25 25 40
VSPL10 10 L 500 80 25 25 40
VSPL20 20 L 575 100 25 25 40
VSPL50 50 L 800 150 40 40 100
VSPL100 100 L 900 225 40 40 100
VSPL200 200 L 1100 300 40 40 100
VSPL300 300 L 1175 400 50 50 100
VSPL500 500 L 1400 450 50 50 150
L
DN
Working
Capacity
Bulb
Capacity
D
T
B
P
DN
DN2 DN3
DN1
10°
45° S
DN
DN2DN1
DN1
L
DN
DN2DN1
DN1
L
DN3
L
6. R
20* marked items are available fast.
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VSL5 5 L 425 50 25 25 40
VSL10 10 L 500 80 25 25 40
VSL20 20 L 575 100 25 25 40
VSL50 50 L 800 150 40 40 100
VSL100* 100 L 900 225 40 40 100
VSL200* 200 L 1100 300 40 40 100
VSL300 300 L 1175 400 50 50 100
VSL500 500 L 1400 450 50 50 150
VESSELS
FIVE NECK BOTTOM OUTLET SPHERICAL VESSEL
FIVE NECK BOTTOM OUTLET SPHERICAL VESSEL
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VS 5 5 L 425 50 25 25 40
VS 10 10 L 500 80 25 25 40
VS 20 20 L 575 100 25 25 40
VS 50 50 L 800 150 40 40 100
VS 100* 100 L 900 225 40 40 100
VS 200* 200 L 1100 300 40 40 100
VS 300 300 L 1175 400 50 50 100
VS 500 500 L 1400 450 50 50 150
SPHERICAL VESSELS WITH NOZZLE AT 90°
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VSD5 5 L 425 50 25 25 50
VSD10 10 L 500 80 25 25 50
VSD20 20 L 575 100 25 25 50
VSD50 50 L 800 150 40 40 80
VSD100 100 L 900 225 40 40 80
VSD200 200 L 1100 300 40 40 150
VSD300 300 L 1175 400 50 50 150
VSD500 500 L 1400 450 50 50 150
Thesevessels are used in Circulatory BoilerSystemand are to be supported on a vessel
holder.Morenozzlescanbeprovidedontheequatoronrequestforspecialrequirements.
SPHERICAL CYCLONES
Cyclonescanbeusedfortheseperationofdropletsandsolidsfromgasesandvapours.
Cyclonesaretobesupportdonavesselholder.Adippipeshouldbeusedonthetopneck.
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VSCY5 5 L 425 50 25 25 40
VSCY10 10 L 500 80 25 25 40
VSCY20 20 L 575 100 25 25 50
VSCY50 50 L 800 150 40 40 50
DN3
DN
DN3
DN
DN2DN2
DN1
DN2
DN3
DN
DN2DN2
DN1
DN3
DN3
DN
DN1
DN3
L
DN
DN2
DN3
DN1
L
7. R
21
SPHERICAL RECEIVERS
VESSELS
Cat. Nominal (100) (100)
Ref. Capacity L DN DN1 DN2 Dn3
VR5* 5 L 350 25 25 25
VR10* 10 L 425 25 25 25
VR20* 20 L 500 25 25 25
VR50 50 L 675 40 25 25
VRB5 5 L 350 25 25 25 25
VRB10 10 L 425 25 25 25 25
VRB20 20 L 500 25 25 25 25
VRB50 50 L 675 40 25 25 25
Receivers are provided with builtin drip pipe. These are to be supported on a vessel
holding ring.
ADDITION VESSELS
These vessels are provided with a short bottom outlet. These should be supported on a
vessel holder/ holding ring.
Cat. Nominal L DN DN1
Ref. Capacity
VA5 5 L 375 360 50
VA10* 10 L 435 80 25
VA20 20 L 510 100 25
VA50 50 L 675 150 40
VA100 100 L 775 225 40
VA200 200 L 975 300 40
VA300 300 L 1075 400 50
VA500 500 L 1400 450 50
SPHERICAL VESSELS WITH WIDE BOTTOM OUTLET
These vessels are generally used to fit immersion exchangers in the bottom. Special
heating mantle or bath should be used if used with.
Cat. Nominal
Ref. Capacity L DN DN1 DN2 Dn3
VSR50 50 L 750 150 150 40 100
VSR100 100 L 850 225 150 40 100
VSR200 200 L 1050 300 150 40 100
VSE50 50 L 800 150 225 40 100
VSE100 100 L 900 225 225 40 100
VSE200 200 L 1100 300 225 40 100
L
DN
DN1
DN
DN2DN2
DN3
DN1
L
DN3
DN
DN1
L
DN2
o
10 o
10
8. R
22
VESSELS
To fit a bottom outlet valve (BAL type) all spherical and cylindrical vessels can be supplied
with valve seat in bottom outlet. For this, Add a suffix "/B" to the catalogue reference of a
vessel,fore.g.'VSL50’shouldbementionedas'VSL50/B'.
VESSELS WITH BOTTOM OUTLET VALVE SEAT
Notes on use of Spherical vessesls.
1. Generally, the centre nozzle, referred as DN in all types of vessels, is used for either
stirrer fixing or if stirrer is not fixed, for vapour outlet.
2. The bottom outlet, referred as DN1 in all types is used for drain. However, in type
VSR & VSE, it is also used for fixing immersion heat exchanger.
3. The small side nozzles, referred as DN2 in all types, are used
(a) to fix thermometer pocket or,
(b) to fix dip pipe for liquid inlet or,
(c) to fix sparger for gas purging or,
(d) to fix vacuum control or vent valve or,
(e) for solid addition.
4. The bigger side nozzle, referred as Dn3, is used for vapour outlet where stirrer is
fixed on centre neck. It can also be used for cleaning in case centre neck is used for
vapour outlet.
5. Vessels having long bottom outlet, viz VSM, VSPL, VSL, VS etc, can be supported in a
heating mantle of heating bath. However, vessels having short bottom outlet, viz VS
D, VSCY, VR, VA etc. are to be supported on a vessel holder only. In case of vesels
upto 20L size, vessel holding rings can be used instead of vessel holder.
CYLINDRICAL VESSELS
Cat. Nominal
Ref. Capacity DN DN1 L L1
VZ5/4* 5 L 100 25 700 175
VZ10/6* 10 L 150 25 700 175
VZ20/9* 20 L 225 25 750 175
VZ50/12* 50 L 300 40 1000 175
VZ100/18 100 L 450 40 900 175
VZ150/16 150 L 400 40 1400 175
VZ200/18 200 L 450 40 1500 175
VZ300/24 300 L 600 50 1300 175
Cylindrical vessels of 50 Litres and above must be supported in a vessel holder.
Otheraccessories,like stirrers,baths, vesselholdersetc,forcylindrical vesselscan besupplied
tospecialorders.
CYLINDRICAL VESSEL COVERS
Cat. Ref. DN DN1 DN2 L
VZA4* 100 - 2x25 200
VZA6* 150 - 2x40 200
VZA9* 225 50 3x25 250
VZA12* 300 80 3x40 250
VZA16 400 100 3x40 275
VZA18 450 100 4x40 275
VZA24 600 100 4x40 300
DN1
KETTLES
Cat. Nominal
Ref. Capacity DN DN1 L L1 d
KZ200 200 L 300 40 1400 175 485
KZ350 350 L 400 50 1500 175 620
Kettles are similar to cylindrical vessels but having a reduced top neck.
DN1
DN
L
L1
DN1
DN2 DN2
L
DN
DN
Ld
DN1
L1
9. R
23
VESSELS
JACKETTED VESSELS
For special applications, cylindrical vessels can be supplied with a jacket for heating or
cooling. Jacket is sealed to the vessel with Viton 'O' ring and other sealing compositions.
The seal prevents high stresses between vessel and jacket by allowing the movement
flexibilitybetween twoduetothermalexpansion.
GlassJackets
Glass Jacket can be used for a maximum operating pressure of 0.5 bar and a maximum
o
operating temperature of 130 C in jacket. The temperature difference between jacket &
0
vessel should not beexceedthan120 C
Cat. For
Ref. Vessel DN DN1 d L L1
DP20/1* 20 L 25 25 12 300 100
DP50/1.5* 50 L 40 25 19 400 100
DP100/1.5* 100 L 40 25 19 500 100
DP200/1.5* 200 L 40 25 19 600 100
DIP PIPES
Dip pipes are used as liquid inlet for spherical vessels.
SHORT DIP PIPES
Short dip pipes are used as re-entry tubes for vessels, heat exchangers etc.
Cat.Ref. DN DN1 d L L1
DP1/1* 25 25 12 100 100
DP1.5/1* 40 25 19 100 100
DP1.5/1.5 40 40 19 100 100
DP2/1 50 25 25 100 100
DP2/1.5 50 40 25 100 100
DP3/1.5 80 40 37 100 125
DP4/1 100 25 25 100 150
DP4/2 100 50 50 100 150
Cat. Ref. L L1 L2 A B D1 D2 DN DN1 DN2 TYPE
VZD5/6 500 325 125 75 275 165 215 150 25 25 A
VZD10/9 575 400 125 90 340 230 280 225 25 25 B
VZD20/12 625 450 125 100 385 315 370 300 25 40 B
VZD30/12 750 575 175 100 510 315 370 300 25 40 B
VZD50/12/14 1050 875 175 - - 315 365 300 25 40 C
VZD50/16/20 825 650 175 - - 415 500 400 25 40 C
VZD100/20/24 955 780 175 - - 516 600 500 25 40 C
VZD200/24/28 1175 1000 175 - - 615 700 600 25 40 C
JACKETTED VESSELS (TRIPLE WALL)
Goel is presenting Flexi (Detachable) “Transparent Double Jacketed Vessel” to maintain the
leadingpositioninindustrybywayofdevelopingindigenouslynewerproductswithhighervalue
towardstheirMissionandtocaterthecustomerviainnovation.
Salient Features
Vacuum Jacket ensures
- Transparent insulation.
- Minimum heat loss
- Process visibility.
- Minimize frost formation for cryogenics operation.
Vacuum Jacket & main vessels are detachable ensures
- Ease of cleaning.
- No breakages due to thermal expansion.
- Partial Replacement of any part can be possible reduce the maintenance cost.
Cat. Ref. L L1 L2 A B D1 D2 DN DN1 DN2
VZT5/6/8 620 350 175 75 310 215 275 150 25 25
VZT10/9/12 700 420 175 90 370 315 390 225 25 25
VZT20/12/14 675 500 175 125 368 365 423 300 25 40
VZT50/16/18 825 650 175 200 350 465 523 400 25 40
A
DN1
DN
D1
D2
B
L1
L
L2
DN1
DN2
o
70
L1
L
d
DN
DN1
DN
L1
L
d
TYPE 1
L1
L
DN
d
TYPE 2
A
L
L1
B
D1
D2
L2O
45
TYPE-B
DN
DN1
DN1
DN2
DN
DN1
A
L
L1
B
D1
D2
L2
DN1
DN2
O
45
L1
L
A
D1
L2
DN2
DN1
D2
DN
10. R
24
VESSELS
Gas spargers are used for gas feed/sparging in the vessels.
GAS SPARGERS
For No.of
Cat.Ref. Vessel DN DN1 d L L1 Holes
SPG20/1 20 L 25 25 12 300 100 5x1mm
SPG50/1.5 50 L 40 25 19 400 100 5x1mm
SPG100/1.5 100 L 40 25 19 500 100 5x1mm
SPG200/1.5 200 L 40 25 19 600 100 5x1mm
THERMOMETER POCKETS
Cat. For
Ref. Vessel DN d L L1
TP20/1* 20 L 25 12 300 50
TP50/1.5* 50 L 40 19 400 50
TP100/1.5* 100 L 40 19 500 50
TP200/1.5* 200 L 40 19 600 50
HEATING MANTLES
Heating Mantle is used for electrical heating of cylindrical as well as spherical vessels. Also
available in flameproof & non-flame proof models. The flaneproof heating mantle is similar to
normal mantle but the main difference is in construction of heating elements. Heating
elements is flameproof by covering it in magnesium oxide powder & SS metal tube. Heater
terminal terminate in flameproof cold junction terminal enclosure. All electrical control like
regulator,switch,indicatinglamp,relayetc.fittedinflameproofswitchencloser.
Wecanalsoprovideflameproofdigitaltemperatureindicatorcumcontrollerwithsensor.
Vessel Circ- Supply
Cat.Ref. Size D L Watts uits Volts
JMD5 5 L 320 190 750 1 230
JMD10* 10 L 380 220 1200 2 230
JMD20 20 L 485 285 2000 3 230
JMD50 50 L 600 345 3700 3 415
JMD100 100 L 790 470 6000 3 415
JMD200 200 L 920 530 7500 3 415
Vessel Circ- Supply
Cat.Ref. Size D L Watts uits Volts
JMD5/F 5 L 330 200 600 1 230
JMD10/F 10 L 440 220 1000 2 230
JMD20/F 20 L 510 285 2000 3 230
JMD50/F 50 L 610 350 3600 3 415
JMD100/F 100 L 790 430 5200 3 415
JMD 200/F 200 L 940 510 8400 3 415
L1
L
d
DN
L1
L
DN
d
D
L
11. R
25
HEATING BATHS
VESSELS
Heatingbathsareusedforelectricalorsteamheatingofglass vessels. Depending upon the
temperaturerequirements,different types of thermic fluids or water can be used as heating
media. Heating baths are provided with a pair of encased heaters with controller box, a coil for
passingthesteamorcoolingwater,a cushioned vessel holding ring, a bottom outlet sealing
arrangement,alid andthreadedsockettypeintletsandoutlets.
Cat.Ref. Vessel d L Watts HTA HTA
Size Vessel Coils
SBH20 20 L 480 340 2x2000 0.25 0.4
SBH50* 50 L 615 415 2x3000 0.5 0.6
SBH100 100 L 720 535 2x4000 0.7 1
SBH200 200 L 900 620 2x5000 1 1.5
VESSEL HOLDERS
COOLING BATHS
Cooling baths are used for cooling the glass vessel with ice crystals. Cooling Baths are
provided with a vessel holding ring, bottom outlet sealing arrangement and a lid.
Cat.Ref. Vessel d L
Size
BHC20 20 L 480 340
BHC50 50 L 615 415
BHC100 100 L 720 535
BHC200 200 L 900 620
Vessel holders are made of cast aluminum with a plaster lining shaped to fit the
vessel. These are to be supported on 3 jacking bolts.
Cat.Ref. Vessel D d L
Size
VSS20* 20 L 325 230 100
VSS50* 50 L 390 230 100
VSS100 100 L 410 250 100
VSS200 200 L 700 400 215
These metal rings are wrapped with asbestos rope and are to be supported on two
jacking bolts.
Cat.Ref. Vessel d L
Size
VRS2 2 L 100 15
VRS5* 5 L 150 15
VRS10* 10 L 215 15
VESSEL HOLDING RINGS
D
d
L
L
d
d
L
d
L
12. R
26
VESSELS
Decantation is a process of separation of two immiscible liquids having different densities.
Whentheseliquidsallowedtosettleformstwodistinctlayers,havieratbottomandlighter a t
top.GoelhasdevelopedaDecantorwhichissuitableforcontinuousdecantation.
The mixture of liquids is continuously fed in the Decantor at low velocity. This allow sufficient
residencetimefortheformationofseparatelayers.Thelightphaseliquidis c o n t i n u o u s l y
removedfromthelightphaseoutletatthetop.Theheavyphaseliquidenters the dip pipe at
lowerendandoverflowinthedischargepipeandisremovedfromthebottom.
Goel's Decantor provides continuous separation, visual monitoring, and ensurseparation even
afterfeedisstopped.
Decantors can be provided with Adjustable overflow valve, (Type B) to adjust the position of
interfacefordifferentoperatingsituations.
DECANTORS
Heavy Light
Phase Phase
Cat. Nominal Inlet Outlet Drain Outlet Vent
Ref. Capacity L DN DN1 DN2 DN3 DN4 DN5 DN6 DN7 Type
SPS20 20 L 800 80 25 50 25 25 25 25 50 A
SPS50 50 L 1025 100 40 50 25 25 40 40 50 A
SPS100 100 L 1175 150 40 50 25 25 40 40 50 A
SPS200 200 L 1475 225 40 50 25 25 40 40 50 A
SPA20 20 L 1000 80 25 50 25 25 25 25 50 B
SPA50 50 L 1225 100 40 50 25 25 40 40 80 B
SPA100 100 L 1375 150 40 50 25 25 40 40 80 B
SPA200 200 L 1675 225 40 50 25 25 40 40 80 B
Decantors can also be constructed with horizontal cylindrical vessels
(Cat.ref. HPS or HPA) to provide larger seperating surface.
HPA
HPS
DN1
DN4
DRAIN
HEAVY
PHASE
DN6
VENT
DN7
DN
LIGHT
PHASE
DN2
DN3
L
TYPE - A
DN5
DN1
DN4
DRAIN
HEAVY
PHASE
DN6
VENT
DN7
DN
LIGHT
PHASE
DN2
DN3
TYPE - B
L
DN5
13. STIRRERS
A variety of stirrer & stirrer drives are available to use glass vessels as agitated reaction
equipment.
1. Stirrer material of construction: Glass, Stainless Steel or PTFE Lined.
2. Stirrer Design: Impeller stirrer with blades, Vortex stirrer, Propeller Stirrer &
anchor Stirrer.
3. Stirring Drive: Non-flameproof or Flameproof stirrer drive, 192 RPM with
Variable Frequency Drive.
4. Stirring Assembly: Stirring Assembly with bellow seal or with mechanical seal.
14. Thisunitissuitableforuseundercorrosive conditions. Only glass and PTFE are exposed to
processfluids.Bellowsealcanbeusedundervacuum down to 10mm Hg absolute. Mechanical
sealcanbeuse under vacuum 1mm Hg absolute or under pressure permitted into glass vessels.
Generallyareducerisrequiretoconnectthechuckandsealtotopneckofthevessel
R
27
STIRRERS
CHUCK & SEAL
Stirrers are assembled in a vessel using a chuck, seal & a reducer. A typical
arrangement of stirrer fitted in a vessel is shown in the diagram.
Size A B C D L
20 L 250 150 450 25 825
50 L 300 200 600 50 1050
100 L 300 250 700 50 1200
200 L 300 300 900 50 1450
300L 300 25 1000 50 1275
Cat.Ref. Cat.Ref.
Bellow Mechannical
Seal Seal Vessel DN L L1 d
CSA1 CSM1 20 L 50 300 250 25
CSA1.5* CSM1.5* 50,100, 80 360 300 47
200 L
STIRRER WITH TEFLON BLADES
These stirrers are used with liquid of low viscosity.
Cat.Ref. Vessel L L1 L2 L3 d D
STB10 10 600 300 15 175 25 100
STB20 20 825 300 25 200 25 100
STB50 50 1050 300 25 200 47 150
STB100 100 1200 300 30 250 47 175
STB200 200 1450 300 30 325 47 200
STB300 300 1275 350 30 425 59 275
These stirrers are used with liquid of low viscosity containing small solid particles.
VORTEX STIRRER
Cat.Ref. Vessel L L1 L2 d D
STV50 50 1050 300 50 47 95
STV100 100 1200 300 65 47 140
STV200 200 1450 300 65 47 190
PROPELLER STIRRER
These stirrers are used with liquid of high viscosity or liquid with big solid particles.
Cat.Ref. Vessel L L1 L2 d D
STP50 50 1050 300 50 47 95
STP100 100 1200 300 65 47 145
STP200 200 1450 300 65 47 210
A
B
C
D
L
L
L1
DN d
L1
L
L2
D
L1
L
L3
L2
D
d
L1
L
L2
D
15. R
28
A stirrer is assembled in chuck with bellow seal and appropriate reducer. This assembly is
convenient to install on a vessel. The assembly consist of :
a. Glass stirrer STB/STV/STP
b. Chuck and seal assembly CSA
c. Reducer PR
STIRRERS
STIRRING ASSEMBLY WITH BELLOW SEAL
Cat. Ref. For Stirrer Chuck Reducer
Vessel Used & Seal Used
STBA20 20L STB20 CSA1 PR4/2
STBA50* 50L STB50 CSA1.5 PR6/3
STBA100* 100L STB100 CSA1.5 PR9/3
STBA200 200L STB200 CSA1.5 PR12/3
STVA50 50L STV50 CSA1.5 PR6/3
STVA100 100L STV100 CSA1.5 PR9/3
STVA200 200L STV200 CSA1.5 PR12/3
STPA50 50L STP50 CSA1.5 PR6/3
STPA100 100L STP100 CSA1.5 PR9/3
STPA200 200L STP200 CSA1.5 PR12/3
A stirrer is assembled in chuck with mechanical seal and appropriate reducer. This
assembly is convenient to install on a vessel. The assembly consist of :
a. Glass stirrer STB/STV/STP
b. Chuck and mechanical seal CSM
c. Reducer PR
STIRRING ASSEMBLY WITH MECHANICAL SEAL
Cat. Ref. For Stirrer Chuck Reducer
Vessel Used & Seal Used
STBM20 20L STB20 CSA1 PR4/2
STBM50* 50L STB50 CSA1.5 PR6/3
STBM100* 100L STB100 CSA1.5 PR9/3
STBM200 200L STB200 CSA1.5 PR12/3
STBM300 300L STB300 CSA2 PR16/4
STVM50 50L STV50 CSA1.5 PR6/3
STVM100 100L STV100 CSA1.5 PR9/3
STVM200 200L STV200 CSA1.5 PR12/3
STPM50 50L STP50 CSA1.5 PR6/3
STPM100 100L STP100 CSA1.5 PR9/3
STPM200 200L STP200 CSA1.5 PR12/3
16. R
29
STIRRERS
STIRRER DRIVES
A1400RPM3Phasenon-flameproofmotorwithbuilt-ingearissupplied along with a flexible
shaft.Amotorcouplingtocoupletheflexibleshafttomotorisalsoprovided. Other end of the
flexibleshaftistobefittedintothechuck.
Cat.Ref. HP RPM
RSD.5* 0.5 192
FLAMEPROOF STIRRER DRIVES
A 1400 RPM 3 Phase flameproof motor coupled with reduction gear is supplied along with a
flexible shaft. Motor is mounted on a metal base frame, which is designed to install easily
with a Glass Assembly.
Cat.Ref. HP RPM
FSD.5* 0.5 192
SPEED REGULATORS
3 Phase non-flameproof regulators are available to control the speed of stirrer drives.
Cat.Ref. Phase Type
REG3 3 A
VFD3 3 B
18. SALIENT FEATURES
R
31
HEAT EXCHANGERS
SHELL AND TUBE HEAT EXCHANGERS
Shell & tube heat exchangers offer large surface area in combination with efficient heat transfer
and compactness. These are widely used in industries for various duties like cooling, heating,
condensation, evaporation etc. GOEL are the pioneers in the field of glass shell and tube heat
exchangersinIndiaandtheirproducthasa widemarketacceptability.
INTRODUCTION
ADVANTAGES OVER CONVENTIONAL COIL TYPE HEAT EXCHANGERS
1. Universal corrosion resistance an excellent alternative to expensive MOCs like
graphite, hastelloy, copper titanium, tantalum and other exotic metals.
2. Excellent heat transfer as fouling does not occur on smooth glass surfaces.
3. Flexibility of installation vertical / horizontal.
4. Easy replacement of tubes for repair and cleaning.
5. Available in wide range of HTAs.
6. Ease of installation due to light weight.
7. Economical.
8. Suitable for applications where large HTAs are required in limited space.
(1) The overall heat transfer coefficient in shell and tube heat exchanger is about 3
times higher than in coil type heat exchanger.
(2) The pressure drop in shell and tube heat exchanger is minimal compared to 2-3
2
kg/cm in coil side of coil type heat exchanger.
(3) For requirement of higher heat transfer areas shell and tube heat exchanger is the
only alternative.
CONSTRUCTION FEATURES
The glass tubes are sealed individually into PTFE tube sheet with special PTFE sockets and
packing.This unique ferruletypesealingarrangement permitseasyreplacement and cleaningof
tubes. Baffles on shell side ensure improved heat transfer by increased turbulance. Further
detailsofconstructioncanbeseeninthediagram.
TYPE
Three basic versions * are available :
Material Of Construction
Model Shell Tube Header Duty
RGG Glass Glass Glass For heat transfer between two
agressive media.
RGM Glass Glass Steel/ FRP For heat transfer between
agressive media in shell & non-
aggressive media in tubes.
RMG Steel/FRP Glass Glass For heat transfer between
aggressive media in tubes &
non-aggressive media in shell.
* GOEL provides assistance to clients for selecting the
right model for specific duty.
HEADER
SOCKET
TUBE SHEET
PACKING
GLASS TUBE
TIE ROD
BAFFLES
SHELL