Leonardo Villamil has over 21 years of experience in civil and structural engineering. He has worked on numerous projects in Qatar and Saudi Arabia involving the design of buildings, industrial structures, and infrastructure for oil, gas, and petrochemical plants. His experience includes structural design, construction supervision, project management, and engineering consultancy. He is currently a civil/structural engineer for Chiyoda Almana Engineering in Qatar.
Alan Rafer is a mechanical engineer with 12 years of experience in piping engineering and construction. He has expertise in piping design, layout, and supervision using CAD software like AutoCAD, Microstation, PDS, PDMS, and Cadworx. He is interested in working in other industries and has experience leading teams and delivering projects on schedule. His most recent role was as an Area Lead Engineer at GS East Asia Manila where he oversaw proposal projects.
Roy Firtha has over 42 years of experience in piping and mechanical design and construction engineering for refineries, chemical plants, power plants, and offshore oil and gas platforms. He has worked for Fluor Corporation for 10 years in both engineering and construction roles. His experience includes managing construction schedules and supervising field engineers. He is proficient in several CAD and 3D modeling software programs.
EDUARDO H. PARE DESIGN CONSIDERATIONS TO AVOID WATER LEAKAGES ON BUILDINGEduardo H. Pare
The document discusses proper analysis and design of structures to avoid water leakages. It states that structures and foundations must be analyzed and designed accounting for short- and long-term settlements, including differential settlement, as these stresses can cause cracks and movements. It also states that if concrete structures are designed and constructed properly according to the specified procedures, waterproofing products may not be needed as the concrete itself can become waterproof, allowing substantial cost savings. The author provides his credentials and experience designing various structures.
D. Giri H. Rao has over 16 years of experience in engineering design for oil and gas projects. He currently works as a lead design engineer for Avineon (I) Pvt Ltd in Hyderabad, India. Prior to this, he held design and engineering roles at Technip, PL Engineering, BecRel Engineering, and other companies. He has expertise in pressure vessels, heat exchangers, columns, and other static equipment design.
Esteban Raganit has over 15 years of experience as a civil engineer working on various oil, gas, and industrial projects. He has specialized in civil engineering design, including roads, earthworks, drainage, and concrete structures. Some of the major projects he has worked on include LNG facilities in Qatar, Saudi Arabia, and Australia. He is experienced using various engineering software and has held leadership roles overseeing civil engineering teams.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Lan Lisa Zhang has over 20 years of experience in mechanical design and piping design. She has worked on projects in various industries including petrochemical, oil and gas, manufacturing and mining. She is proficient in 3D modeling software such as Solidworks, CADworx, AutoPlant and AutoCAD. Zhang has a Master's degree in Mechanical Engineering and has worked as a senior designer, package designer, mechanical designer and piping designer on projects around the world.
- The document provides a summary of Sreekumar Pillai's professional experience and qualifications. He has over 30 years of experience in engineering, procurement, and construction management of refinery, fertilizer, oil and gas projects. He has led engineering teams and implemented software systems like SAP, PDS, PDMS. He has managed large projects in India and internationally for companies like Saudi Aramco, ONGC, and IOCL.
Alan Rafer is a mechanical engineer with 12 years of experience in piping engineering and construction. He has expertise in piping design, layout, and supervision using CAD software like AutoCAD, Microstation, PDS, PDMS, and Cadworx. He is interested in working in other industries and has experience leading teams and delivering projects on schedule. His most recent role was as an Area Lead Engineer at GS East Asia Manila where he oversaw proposal projects.
Roy Firtha has over 42 years of experience in piping and mechanical design and construction engineering for refineries, chemical plants, power plants, and offshore oil and gas platforms. He has worked for Fluor Corporation for 10 years in both engineering and construction roles. His experience includes managing construction schedules and supervising field engineers. He is proficient in several CAD and 3D modeling software programs.
EDUARDO H. PARE DESIGN CONSIDERATIONS TO AVOID WATER LEAKAGES ON BUILDINGEduardo H. Pare
The document discusses proper analysis and design of structures to avoid water leakages. It states that structures and foundations must be analyzed and designed accounting for short- and long-term settlements, including differential settlement, as these stresses can cause cracks and movements. It also states that if concrete structures are designed and constructed properly according to the specified procedures, waterproofing products may not be needed as the concrete itself can become waterproof, allowing substantial cost savings. The author provides his credentials and experience designing various structures.
D. Giri H. Rao has over 16 years of experience in engineering design for oil and gas projects. He currently works as a lead design engineer for Avineon (I) Pvt Ltd in Hyderabad, India. Prior to this, he held design and engineering roles at Technip, PL Engineering, BecRel Engineering, and other companies. He has expertise in pressure vessels, heat exchangers, columns, and other static equipment design.
Esteban Raganit has over 15 years of experience as a civil engineer working on various oil, gas, and industrial projects. He has specialized in civil engineering design, including roads, earthworks, drainage, and concrete structures. Some of the major projects he has worked on include LNG facilities in Qatar, Saudi Arabia, and Australia. He is experienced using various engineering software and has held leadership roles overseeing civil engineering teams.
Resume - Wan Sazali, PDMS Piping DesignerWan Sazali
W. Mohd Sazali bin W. Muda is a Malaysian piping designer with 8 years of experience in engineering design, fabrication, and as-built drawing projects for both offshore and onshore facilities. He is proficient in piping modeling software like PDMS and AutoCAD, and has worked on projects in Malaysia, Qatar, and Turkmenistan for companies including PETRONAS, Shell, and Hess. His current role is as a PDMS piping designer for ARMADA TPCE in Kuala Lumpur.
Lan Lisa Zhang has over 20 years of experience in mechanical design and piping design. She has worked on projects in various industries including petrochemical, oil and gas, manufacturing and mining. She is proficient in 3D modeling software such as Solidworks, CADworx, AutoPlant and AutoCAD. Zhang has a Master's degree in Mechanical Engineering and has worked as a senior designer, package designer, mechanical designer and piping designer on projects around the world.
- The document provides a summary of Sreekumar Pillai's professional experience and qualifications. He has over 30 years of experience in engineering, procurement, and construction management of refinery, fertilizer, oil and gas projects. He has led engineering teams and implemented software systems like SAP, PDS, PDMS. He has managed large projects in India and internationally for companies like Saudi Aramco, ONGC, and IOCL.
This document provides a summary of Ashwin Sasikumar's experience as a Mechanical Design Engineer, including over 5 years working on projects involving wind turbines, oil rig equipment, valves, and more. It outlines his skillset which includes CAD tools, PLM, DFMEA, and Microsoft Office. Significant accomplishments highlighted include developing innovative solutions to speed up production and increase safety. Professional experience is detailed working for Larsen & Toubro Technology Services on projects involving pipe handling equipment, tools for wind turbine components, and the design of converter bases and nacelle structures.
Sandeep Kumar Pandey is a certified civil engineer with over 10 years of experience in project management, construction management, and site management. He has worked on numerous large-scale projects in industries such as oil & gas, power plants, and civil construction. Currently he is working as the project lead for the Causeway Culvert Project in Abu Dhabi, where he is responsible for all civil activities and contractor management. Previously he has worked on substation and pipeline projects in Dubai and large infrastructure projects such as oil storage terminals and power plants in India.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking senior level assignments. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the major projects he has worked on include the Banyu Urip LNG Development Project, South Mahakam Field Development Project, and Saudi Kayan Olefins Plant Project. He is proficient in engineering software such as PvElite, CODECAL, and COMPRESS.
EDUARDO H. PARE 10 METHODS TO AVOID WATER LEAKAGES ON BUILDING CONSTRUCTIONEduardo H. Pare
THE 10 METHODS OF DESIGN & CONSTRUCTION APPLICATIONS
TO AVOID WATER LEAKAGES ON BUILDING
AUTHOR: EDUARDO H. PARE - BSCE, HAU, EPCC, PMC
CIVIL/STRUCTURAL ENGINEER
DESIGN & CONSTRUCTION
Phaniraz Raacchakonda is applying for a Sr. Structural PDMS Designer position. He has over 17 years of experience in structural design and engineering, including 8 years specifically in offshore and oil & gas projects. His experience includes roles at Technip, Aibel, and WorleyParsons where he performed structural modeling, drafting, design, and team leadership. He is proficient in PDMS, AutoCAD, and other structural design software. His most recent roles have involved structural design for topside modules on FPSOs, platforms, and other offshore structures.
Hayden Pimm is a very experienced piping designer with over 25 years of experience in conceptual and detailed facility design. He specializes in rapidly translating process flows into piping and instrumentation diagrams and initial facility layouts. His experience spans conventional oil and gas, unconventional gas, and petrochemical industries. He is skilled at identifying constraints and tensions in layouts and visualizing potential solutions, and regularly uses 3D modeling software like Bentley and Navisworks.
This document provides a summary of the career and qualifications of R. Vijaya Kumar, a piping design engineer with over 13 years of experience in piping design, engineering, and project management for oil and gas projects. It outlines his responsibilities and software experience, and lists relevant projects with employers like Samsung Engineering, Fluor Arabia Limited, Bechtel, and Foster Wheeler in locations like India, the United States, and Saudi Arabia.
This document contains a resume for Mahadev Prasad. It summarizes his career objective, 12 years of work experience including his current role as Project Lead at QuEST Global, his educational background of a Master's degree in Mechanical Engineering and diploma in Tool and Die Making, technical skills including CAD software, and contact information. Key projects highlighted include engineering services provided to Halliburton and Rolls Royce involving piping design, modeling, and project management.
This resume is for Tran Cong Danh, a Vietnamese national born in 1988. He has a Bachelor's degree in Aeronautical Engineering and over 6 years of experience in piping engineering and project management for onshore and offshore projects. His most recent role is as a Project Engineer at Technip Vietnam Co. Ltd., where he has worked since 2013 managing projects such as an ammonia plant revamp.
Warren Tolentino is a senior structural engineer from Norway with over 19 years of experience in structural design, drafting, and modeling for oil, gas, and petrochemical projects. He is proficient in structural modeling software like PDMS, PDS, Inventor, and AutoCAD. His career includes experience with major engineering and construction companies in roles like structural designer, detailer, and coordinator. He has worked on numerous offshore and onshore projects around the world for clients such as Statoil, Shell, and ADNOC.
This document is a curriculum vitae for Jai Prakash Sharma summarizing his professional experience and qualifications. He has over 14 years of experience as a SP3D and PDS piping designer working on projects for companies like Air Liquide India, Fluor India, Valdel Engineers & Constructors, and others. His responsibilities have included piping modeling, equipment modeling, isometric extraction, and working as both a designer and checker on projects in various industries like oil and gas, refineries, and petrochemical plants. He holds a Diploma in Mechanical Engineering and qualifications in AutoCAD, MicroStation, and other piping design software.
Manish Gupta has over 10 years of experience as a mechanical engineer working on projects in the oil, gas, fertilizer, and chemical industries. He holds a BE in Mechanical Engineering and has worked for several engineering companies, including Samsung Engineering India and GS E&C India. His experience includes conceptual design, engineering, procurement, and project management. He is proficient in design software such as COMPRESS, PVelite, CodeCale, and AutoCAD.
This resume is for Sam V. Marino, a senior piping designer and site technician with over 28 years of experience in piping engineering, plant modeling, QA/QC procedures, and construction field work for oil and gas projects. He has a degree in Piping, Architectural, and Structural Drafting from Lamar University and is proficient in AutoCAD, CadWorx, PDMS, Microsoft Excel, and Word. His experience includes work as a piping designer, checker, and field coordinator on projects such as gas processing units, offshore platforms, refineries, and chemical plants.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Alfred Joe is an instrumentation and telecom engineer seeking a mid-level position in the marine, oil, and gas sectors. He has over 9 years of experience in instrumentation and telecom installations on various vessels and offshore platforms. He is proficient in instrumentation and telecom design, installation, commissioning, and has expertise in international standards relevant to the marine and offshore industries. His experience includes project engineering roles as well as design, construction management, and commissioning responsibilities.
Asraful Hoque Molla has over 14 years of experience as a civil and structural designer. He has extensive experience using modeling software like SP3D, PDS, and PDMS to create 3D models and prepare detailed drawings using MicroStation and AutoCAD. Currently he works as a senior designer at Jacobs ZATE where he is responsible for modeling, design drawings, and reviewing drawings for compliance on various oil, gas and petrochemical projects in Saudi Arabia. He has worked on numerous projects in the Middle East and Asia.
Ted Beery has over 20 years of experience in construction coordination, quality assurance, and safety inspection. He has worked as a construction coordinator, chief inspector, and QA/QC inspector on various civil, structural, and mechanical projects across industries. Beery has expertise in epoxy resins, construction documentation, inspections, and Microsoft Office software. He holds safety certificates from Texas and California and education includes degrees in architecture from San Diego State University and Palm Beach College.
David K. Beverly has over 40 years of experience as a consulting engineer providing civil engineering and surveying services to a wide range of clients. He has a B.S. in Civil Engineering from the University of Tennessee. He is a registered professional engineer in Tennessee and Texas. His recent experience includes working independently as a consulting engineer since 2006, where he has completed residential and commercial developments, landfill design and permitting, and stormwater pollution prevention plans. Prior to that, he held various engineering and management roles with other firms.
Gary L. Jackson is a senior consulting and forensic engineer with over 30 years of experience in mechanical engineering, structural engineering, civil engineering, safety, fire investigation, explosion investigation, failure analysis, and accident reconstruction. He holds professional engineering licenses in Texas and Louisiana and safety certifications including Certified Safety Professional and Certified Fire & Explosion Investigator. Jackson has investigated hundreds of incidents involving industrial accidents, farm equipment, plumbing failures, fires, explosions, and more using failure analysis to determine causation.
This document provides a summary of Ashwin Sasikumar's experience as a Mechanical Design Engineer, including over 5 years working on projects involving wind turbines, oil rig equipment, valves, and more. It outlines his skillset which includes CAD tools, PLM, DFMEA, and Microsoft Office. Significant accomplishments highlighted include developing innovative solutions to speed up production and increase safety. Professional experience is detailed working for Larsen & Toubro Technology Services on projects involving pipe handling equipment, tools for wind turbine components, and the design of converter bases and nacelle structures.
Sandeep Kumar Pandey is a certified civil engineer with over 10 years of experience in project management, construction management, and site management. He has worked on numerous large-scale projects in industries such as oil & gas, power plants, and civil construction. Currently he is working as the project lead for the Causeway Culvert Project in Abu Dhabi, where he is responsible for all civil activities and contractor management. Previously he has worked on substation and pipeline projects in Dubai and large infrastructure projects such as oil storage terminals and power plants in India.
Resume_Lead Mechanical Engineer - Static Equipment and Package UnitsNirav Mistry
Nirav Mistry is a mechanical engineer with over 14 years of experience seeking senior level assignments. He has extensive experience in front-end engineering, detail design, vendor management, documentation, and construction support for oil and gas projects. Some of the major projects he has worked on include the Banyu Urip LNG Development Project, South Mahakam Field Development Project, and Saudi Kayan Olefins Plant Project. He is proficient in engineering software such as PvElite, CODECAL, and COMPRESS.
EDUARDO H. PARE 10 METHODS TO AVOID WATER LEAKAGES ON BUILDING CONSTRUCTIONEduardo H. Pare
THE 10 METHODS OF DESIGN & CONSTRUCTION APPLICATIONS
TO AVOID WATER LEAKAGES ON BUILDING
AUTHOR: EDUARDO H. PARE - BSCE, HAU, EPCC, PMC
CIVIL/STRUCTURAL ENGINEER
DESIGN & CONSTRUCTION
Phaniraz Raacchakonda is applying for a Sr. Structural PDMS Designer position. He has over 17 years of experience in structural design and engineering, including 8 years specifically in offshore and oil & gas projects. His experience includes roles at Technip, Aibel, and WorleyParsons where he performed structural modeling, drafting, design, and team leadership. He is proficient in PDMS, AutoCAD, and other structural design software. His most recent roles have involved structural design for topside modules on FPSOs, platforms, and other offshore structures.
Hayden Pimm is a very experienced piping designer with over 25 years of experience in conceptual and detailed facility design. He specializes in rapidly translating process flows into piping and instrumentation diagrams and initial facility layouts. His experience spans conventional oil and gas, unconventional gas, and petrochemical industries. He is skilled at identifying constraints and tensions in layouts and visualizing potential solutions, and regularly uses 3D modeling software like Bentley and Navisworks.
This document provides a summary of the career and qualifications of R. Vijaya Kumar, a piping design engineer with over 13 years of experience in piping design, engineering, and project management for oil and gas projects. It outlines his responsibilities and software experience, and lists relevant projects with employers like Samsung Engineering, Fluor Arabia Limited, Bechtel, and Foster Wheeler in locations like India, the United States, and Saudi Arabia.
This document contains a resume for Mahadev Prasad. It summarizes his career objective, 12 years of work experience including his current role as Project Lead at QuEST Global, his educational background of a Master's degree in Mechanical Engineering and diploma in Tool and Die Making, technical skills including CAD software, and contact information. Key projects highlighted include engineering services provided to Halliburton and Rolls Royce involving piping design, modeling, and project management.
This resume is for Tran Cong Danh, a Vietnamese national born in 1988. He has a Bachelor's degree in Aeronautical Engineering and over 6 years of experience in piping engineering and project management for onshore and offshore projects. His most recent role is as a Project Engineer at Technip Vietnam Co. Ltd., where he has worked since 2013 managing projects such as an ammonia plant revamp.
Warren Tolentino is a senior structural engineer from Norway with over 19 years of experience in structural design, drafting, and modeling for oil, gas, and petrochemical projects. He is proficient in structural modeling software like PDMS, PDS, Inventor, and AutoCAD. His career includes experience with major engineering and construction companies in roles like structural designer, detailer, and coordinator. He has worked on numerous offshore and onshore projects around the world for clients such as Statoil, Shell, and ADNOC.
This document is a curriculum vitae for Jai Prakash Sharma summarizing his professional experience and qualifications. He has over 14 years of experience as a SP3D and PDS piping designer working on projects for companies like Air Liquide India, Fluor India, Valdel Engineers & Constructors, and others. His responsibilities have included piping modeling, equipment modeling, isometric extraction, and working as both a designer and checker on projects in various industries like oil and gas, refineries, and petrochemical plants. He holds a Diploma in Mechanical Engineering and qualifications in AutoCAD, MicroStation, and other piping design software.
Manish Gupta has over 10 years of experience as a mechanical engineer working on projects in the oil, gas, fertilizer, and chemical industries. He holds a BE in Mechanical Engineering and has worked for several engineering companies, including Samsung Engineering India and GS E&C India. His experience includes conceptual design, engineering, procurement, and project management. He is proficient in design software such as COMPRESS, PVelite, CodeCale, and AutoCAD.
This resume is for Sam V. Marino, a senior piping designer and site technician with over 28 years of experience in piping engineering, plant modeling, QA/QC procedures, and construction field work for oil and gas projects. He has a degree in Piping, Architectural, and Structural Drafting from Lamar University and is proficient in AutoCAD, CadWorx, PDMS, Microsoft Excel, and Word. His experience includes work as a piping designer, checker, and field coordinator on projects such as gas processing units, offshore platforms, refineries, and chemical plants.
Nirmal Kumar is a piping engineer with over 6 years of experience in oil and gas refineries. He has extensive experience in piping design, cost estimation, site surveys, and project management. Nirmal holds a Bachelor's degree in Mechanical Engineering and is proficient in CADWorx Plant, PDMS, AutoCAD, and other piping design software. He currently works as a Design Engineer in Kuwait, where he is responsible for piping layouts, calculations, stress analysis, and project coordination.
Alfred Joe is an instrumentation and telecom engineer seeking a mid-level position in the marine, oil, and gas sectors. He has over 9 years of experience in instrumentation and telecom installations on various vessels and offshore platforms. He is proficient in instrumentation and telecom design, installation, commissioning, and has expertise in international standards relevant to the marine and offshore industries. His experience includes project engineering roles as well as design, construction management, and commissioning responsibilities.
Asraful Hoque Molla has over 14 years of experience as a civil and structural designer. He has extensive experience using modeling software like SP3D, PDS, and PDMS to create 3D models and prepare detailed drawings using MicroStation and AutoCAD. Currently he works as a senior designer at Jacobs ZATE where he is responsible for modeling, design drawings, and reviewing drawings for compliance on various oil, gas and petrochemical projects in Saudi Arabia. He has worked on numerous projects in the Middle East and Asia.
Ted Beery has over 20 years of experience in construction coordination, quality assurance, and safety inspection. He has worked as a construction coordinator, chief inspector, and QA/QC inspector on various civil, structural, and mechanical projects across industries. Beery has expertise in epoxy resins, construction documentation, inspections, and Microsoft Office software. He holds safety certificates from Texas and California and education includes degrees in architecture from San Diego State University and Palm Beach College.
David K. Beverly has over 40 years of experience as a consulting engineer providing civil engineering and surveying services to a wide range of clients. He has a B.S. in Civil Engineering from the University of Tennessee. He is a registered professional engineer in Tennessee and Texas. His recent experience includes working independently as a consulting engineer since 2006, where he has completed residential and commercial developments, landfill design and permitting, and stormwater pollution prevention plans. Prior to that, he held various engineering and management roles with other firms.
Gary L. Jackson is a senior consulting and forensic engineer with over 30 years of experience in mechanical engineering, structural engineering, civil engineering, safety, fire investigation, explosion investigation, failure analysis, and accident reconstruction. He holds professional engineering licenses in Texas and Louisiana and safety certifications including Certified Safety Professional and Certified Fire & Explosion Investigator. Jackson has investigated hundreds of incidents involving industrial accidents, farm equipment, plumbing failures, fires, explosions, and more using failure analysis to determine causation.
Brenden A. Adams is the Project Director at Nelson Forensics, a firm that provides forensic engineering, architecture, cost estimating, dispute resolution, materials analysis, fire investigation, and other services. He has expertise in analyzing building systems, materials, and failures from various causes. Adams received an M.S. in Civil Engineering and a B.S. in Architectural Engineering from The University of Texas at Austin. He has evaluated various structure types and materials, including concrete, steel, wood, glass, and roofing systems. Adams is a licensed professional engineer in the state of Texas.
Kevin Huey is an experienced aviation structures technician, work center supervisor, and quality assurance inspector with expertise in manufacturing operations, structural maintenance and repair, tool operation, and personnel management. He has diverse experience working for the U.S. Navy and private sector on aircraft structural components and systems. Huey is skilled in metal fabrication, inspection, troubleshooting, and ensuring compliance with safety and quality standards.
Patty Carberry is a civil engineer with over 10 years of experience in drafting, project management, and production scheduling for precast/prestressed concrete and transportation design projects. She has a Bachelor's degree in Civil Engineering Technology and certifications in areas such as CDOT Construction Inspection. Carberry has extensive experience using software such as AutoCAD, Microsoft Office, and AutoCAD Civil 3D. She has worked on various engineering projects involving drafting of plans, calculations, specifications writing, and inspections. Carberry also has leadership experience as a project leader and production scheduler.
Gabriel Mourant is a civil engineer seeking employment and includes his contact information and background. He has over 5 years of experience in quality control and inspection roles for construction companies. This includes managing compaction tests, conducting inspections, and interacting with clients. He has a civil engineering degree from the University of Moncton and is bilingual in English and French. His skills include AutoCAD, project management software, and design areas like roads, foundations, and wastewater.
William D. Clark is a structural engineer with over 35 years of experience managing construction design and field operations projects, especially in remote areas of Alaska. He has extensive experience leading design teams and managing projects with budgets up to $4 billion. His areas of expertise include structural steel, concrete, wood, masonry, and managing teams to deliver multiple projects on time and under budget.
Raja kumar Resume (Senior Civil Engineer)RAJA KUMAR .R
Raman Rajakumar is a senior civil engineer with over 11 years of experience in marine and building construction projects in Singapore. He is currently working as a senior civil engineer for TOA Corporation on reclamation projects at Pulau Ubin and Pulau Tekong, where he is responsible for planning construction activities, preparing drawings and reports, supervising site works, and coordinating with contractors and consultants. Prior to this, he held various civil engineering roles with increasing responsibility on reclamation, drainage, soil improvement, and stabilized dredged fill projects. He holds a Bachelor's degree in Civil Engineering and is proficient in software like AutoCAD and MS Office.
Each month, join us as we highlight and discuss hot topics ranging from the future of higher education to wearable technology, best productivity hacks and secrets to hiring top talent. Upload your SlideShares, and share your expertise with the world!
Not sure what to share on SlideShare?
SlideShares that inform, inspire and educate attract the most views. Beyond that, ideas for what you can upload are limitless. We’ve selected a few popular examples to get your creative juices flowing.
SlideShare is a global platform for sharing presentations, infographics, videos and documents. It has over 18 million pieces of professional content uploaded by experts like Eric Schmidt and Guy Kawasaki. The document provides tips for setting up an account on SlideShare, uploading content, optimizing it for searchability, and sharing it on social media to build an audience and reputation as a subject matter expert.
1) Eduardo Pare has over 25 years of experience in civil and structural engineering design, project management, and construction administration for various industrial, commercial, infrastructure, and marine projects.
2) He has extensive experience designing reinforced concrete and steel structures using programs like STAAD and designing according to codes like ACI, AISC, and BS.
3) Notable past projects include serving as a senior structural engineer for ERGA in Qatar and Lahmeyer International in the UAE, working on airport, power plant, and substation projects in Qatar, UAE, Oman, Saudi Arabia, and other countries.
Muhamed Madian is applying for a Senior Civil Technical Office Engineer position. He has over 13 years of experience in construction projects, including roles reviewing structural drawings, coordinating between engineering disciplines, and ensuring quality standards are met. He believes his education and experience would allow him to effectively contribute to the organization.
Sarayunadh Reddy has over 15 years of experience in structural design and drafting. He has worked on projects in oil/gas, power plants, and industrial structures. His responsibilities have included preparing layouts, detailed steel and concrete designs, 3D modeling, drawing development, coordination, and using various CAD software like AutoCAD, Microstation, Tekla, PDMS, and STAAD. He is currently a Senior Structural Designer with WS Atkins working on oil and gas projects involving pipe racks, supporting structures, and underground structures.
Kannan is a senior piping designer with over 11 years of experience in oil and gas projects. He has extensive experience in piping design, drafting, and project management for offshore and onshore oil and gas facilities. Some of his skills include piping layouts, isometric drawings, fabrication drawings, site surveys, and ensuring quality compliance. He is proficient in software like PDMS, CADWorx, and AutoCAD. Currently he works as a piping designer for Saipem in Angola designing plots, equipment layouts, and pipe supports.
This document is a curriculum vitae for Eloisa Zuñiga-Bonavente, a civil and structural engineer from the Philippines. It lists her contact information, education credentials from Adamson University, engineering software skills, and over 8 years of work experience on infrastructure and industrial projects in Singapore, South Korea, and the Philippines. Her experience includes structural design, CAD drafting, tender evaluation, construction support, and acting as project coordinator and estimator. She seeks to further her career in civil engineering project management.
CV_Amr Abdelhamid Mahrous (Update 20 Oct 2015)amr mahrous
This document is a resume for Amr Abdelhamid Mahrous, a civil engineer with over 26 years of experience in project management and engineering roles. It outlines his educational background, skills, and work history managing civil, buildings, and infrastructure projects for oil and gas companies in Qatar. His career includes roles as a senior maintenance engineer, project engineer, construction supervisor, and project manager for various organizations.
This document provides a brief profile of Sanjiv Annappa Kadam, who is applying for the position of Design Engineer (Civil/Structural). It outlines his educational background, including an M.E. in Civil Structural Engineering and a B.E. in Civil Engineering. It also details over 20 years of experience in civil/structural engineering for oil, gas, and industrial projects in Kuwait. Recent roles have included design engineer positions with Kuwait National Petroleum Company and Al-Meer Technical Services Company.
The document provides a summary of Venkatesh Rajendran's career experience and qualifications. It includes 16+ years of experience as a project manager on EPIC and engineering projects in the oil and gas industry. It also lists his educational qualifications and details of various projects he has managed in Qatar, Saudi Arabia, Nigeria, and India with organizations like Blackcat Consulting, Arabian Fal Company, and Henley Industries Nigeria Ltd.
The curriculum vitae summarizes Wasi Sami's professional experience and qualifications. He has over 10 years of experience in civil engineering and structural design projects for oil and gas companies. He is currently employed as a Project Engineer at Pakistan Arab Refinery Company Limited, where he is responsible for design review, engineering inputs, and project coordination. Previously he has worked for DESCON Engineering Limited, Zishan Engineers, ENAR Petrotech Services, and Alliance Consultants on various civil and structural design projects for industrial facilities, commercial buildings, and residential complexes. He holds a Master's degree in Engineering Management and a Bachelor's degree in Civil Engineering from NED University of Engineering and Technology.
Ramy Mikhail has over 6 years of experience in piping design, field erection supervision, and project management in the steel industry. He currently leads the piping engineering team for a steel mill project in Egypt. Previously, he has worked on projects in Egypt, Vietnam, Malaysia, and Italy, managing piping installation, commissioning, testing, and completion activities. Ramy holds a Bachelor's degree in Mechanical Engineering and is proficient in piping design software and international codes and standards.
I.J.A Sperzen has over 10 years of experience in mechanical design and engineering for offshore and onshore oil and gas projects. He has worked on projects in Saudi Arabia and India, holding positions like Design Engineer, Manager of Design, and Draughtsman. He has expertise in areas like proposal engineering, detail engineering, design of equipment like heat exchangers, vessels, and piping systems. He also has experience working with standards like ASME, API, ANSI, and knowledge of company standards from Saudi Aramco and SABIC. Currently he is pursuing a graduation in Mechanical Engineering and is seeking a challenging position in engineering.
Sunil Kumar has over 13 years of experience managing MEP projects for large commercial buildings. He currently works as a Project Manager for Turner Construction on an airport infrastructure project in Ghaziabad, India. Previously, he held project management roles on hospitals, offices, industrial parks, and residential buildings. Kumar has an MBA in project management and a bachelor's degree in electrical engineering. He is skilled in coordination, scheduling, documentation, and achieving timely project completion while ensuring safety and quality standards.
T.Rama Satyanarayana's CV summarizes his 21+ years of experience in civil and structural design for industrial projects. He has worked on projects in India, Saudi Arabia, and Oman for companies like GS E&C, Samsung Engineering, and Simon Carves. His responsibilities have included 3D modeling, foundation design, steel structures, and serving as a design supervisor to lead project teams. He is proficient in software like PDS, PDMS, SP3D, AutoCAD, and has extensive experience with international codes and standards.
This curriculum vitae summarizes the career and qualifications of T N Murthy. He has over 8 years of experience as a structural designer for oil and gas projects. His experience includes 3D modeling, detailed shop drawing preparation, fabrication drawings, material reports, and coordinating with fabrication shops. He is proficient in Tekla Structure, BOCAD, AutoCAD, and has basic knowledge of PDMS. His educational background includes a degree in Civil Engineering.
Gurunada Kumar Gandreti has 18 years of experience as a structural detailer using Tekla and StruCAD. He has worked on projects in Australia, India, Ireland, Canada, and Papua New Guinea. Some of his responsibilities have included planning projects, leading detailing teams, preparing 3D models and drawings, and ensuring quality. He is skilled in materials estimation, CNC programming, fabrication, and project coordination.
K. Jagadiswara Rao has over 39 years of experience in oil, gas, LNG, chemical, and process industries. He has expertise in estimation, proposals, FEED, EPC, and operations and maintenance projects. Some of his roles include director, senior estimation manager, consultant, and project manager. He has successfully led project estimates and proposals for major clients such as Saudi Aramco, SABIC, and QP.
This document is a resume for Padmanabh M. Dhobale, a piping design engineer with over 11 years of experience working on projects in countries like the UAE, India, Egypt, Singapore, and Saudi Arabia. Some of his responsibilities have included 3D modeling, developing plot plans, nozzle orientation, rack design, and material takeoffs. Currently he works as a senior piping engineer for Dodsal Engineering & Construction in Dubai where he is the lead engineer for piping systems on a $1 billion water treatment project in Kuwait. Previously he has worked for companies like Petrofac, Toyo Engineering, and Shell on various oil and gas, petrochemical and refinery projects.
This document is Albert Audu's curriculum vitae. It outlines his education, qualifications, work experience, and roles and responsibilities in various mechanical engineering projects over 15 years. Specifically, it details his current role as Lead Mechanical Engineer for CresTech Engineering on the TOTAL EGINA BUOY project, and previous roles on projects for ExxonMobil and Chevron involving offshore oil and gas facilities design, upgrades, and maintenance.
Shilpesh Sitakant Adbal is a civil and structural designer with over 9 years of experience in process plants including oil and gas. He has expertise in software such as SP3D, PDMS, Tekla, and AutoCAD. He holds a diploma in civil engineering and has worked on numerous projects for companies such as Linde Engineering India, WorleyParsons, United Phosphorus Limited, and BASF India. His experience includes 3D modeling, preparing civil and structural drawings, designing steel and concrete structures, and coordinating with other teams.
The document is a cover letter and resume submitted by Puneet Dogra for a position as a Mechanical Engineer. In the cover letter, Puneet highlights his 11 years of experience in mechanical engineering, including currently working as a Lead Project Field Engineer in Oman. He also requests an opportunity for an interview. Puneet's resume then details his academic and professional qualifications, including designing HVAC systems and managing projects in Oman and India over the past 11 years.
Similar to Updated CV (LEONARDO M VILLAMIL JR) 19-1-16 (20)
1. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 1 of 9
SUMMARY
Registered Civil Engineer (CE) with more than Twenty-one (21) Years’ experience in the field of Civil and Structural
Engineering with solid background of designing steel structures, foundation for buildings, industrial vessels and other
infrastructure in Petrochemical / Gas Compression Plants, Refineries, Electrical Plants, Commercial and Residential
High rise Buildings, review & approval of variation orders, review of subcontractorbids and site supervision.
And has an Eight (8) years extensive experience in the field of Civil and Structural Engineering for different oil &
gas projects & Petrochemicals. Scope covers Detailed Engineering Design, Conceptual Design/Front End
Engineering Design (FEED), and construction supervision gained from multinational Engineering, Procurement,
Construction & Commissioning Companies. Engage in preparation of technical engineering documents such as
preparation of concrete and structural specifications, construction scope of works, estimate man-hour required
preparation of detailed/conceptual package, technical evaluation and technical assistance. Engineering Management
such as Quality, Schedule and Cost Control.
WORK EXPERIENCE
Current Employment
From : Dec. 24, 2013 – Present
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Civil/Structural Engineer
Project/s Involved:
QAFAC 12080 - Revision of Foundation Drawings as per checking of clashes.
QAFAC - METHONOL CONVERTER PROJECT - 12080 - Verification and checking of foundation for
Eccentric
QAFAC - Elevator PRJ_QFE-13045(QFE-RFS-022)
QAFAC - Additional Firewater Tank Project
QAFAC - ESA-031 - WWTP Modification
QAFAC - QFE-ESA - EOT Crane Endurance Study
QAFAC - QFE-ESA-029 - FIRE HYDRANT EXTN & MODIFICATION
QAFAC - QFE-ESA-039 - STUDY AND DESIGN OF COALSCER
QAFAC - Steel Support to Exchanger Project (QFE-RFS-034)
QAFAC ESA-007LV 1101:Downstream Condensate T-Joint and Elbow Failure Project
QAFAC-ESA-037 - Engineering Study and Design for Additional Firewater
QP-KOD Project (12031)
QG2 Elevator DETAIL ENGG
Q-Chem. - Elevator Replacement Project (QCT2-RFS-013)
Q-Chem. - Electrical Chiller Installation - QCLT-13032
Q-Chem. - Tr3-Extruder Gearbox crane up gradation Project
Q-Chem. - QCT2-RFS-007 - Hexene Sparger Design (DD)
Q-Chem. - QCT2-RFS-017 - Safety Shower Up gradation PRJ
RLOC - RLT2-RFS-009 - Deluge System for Lube Oil Skids
RLOC - RLT2-RFS-001_Pygas Deluge System
2. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 2 of 9
RLOC - RLT2-RFS-009 - DELUGE SYSTEM WITH FIXED WATER SPRAY
RLOC - ALKHARANA PROJECT
RLOC - RLT2-RFS-013_(New Ethane Sphere Tank Project)
RLOC - RLT2-RFS-010_MAINT.ACCESS PLATFORM FOR AIR FIN FAN COOLERS
RasGas - RFS-154 (RGCP-625) - GTG Inlet Filter House Improvement Project (Detailed Engineering)
RasGas - RFS-128 EPCm - LNG Road Tanker Loading Facility to Supply LNG to RLESC Project
RFS-129 (RGCP-552) - RGX2 LP/MP/HP Steam Reliability Improvement – Detail Engineering Design
Qatargas - QG1_Power Bridging Project (Medgulf)
Qatargas - Engineering Study for Condensate Heater, 81-F1201, NOX Minimization <Proposal for BEDP>
Qatargas - QG-LTC-LRN-1969-15 - FEED for Zekreet Phase1 (FEED & Tender SoW)
QAFAC ESA 036 - Endurance study & upgrading of existing structure of X-1105 shed to upgrade the crane
capacity to 7 tons - CTR to be prepared
QAFAC - FIRE HYDRANT EXTENSION AND MODIFICATION PROJECT (DETAILED
ENGINEERING) - Civil CTR
QG Elevators-CTR Man-hour preparation
QAFAC - ESA-032 - SNCR for NOX emission from Methanol Reformer
QAFAC - QFE-ESA-036 (QFE-14028 SP) - Endurance Study & Upgrade of Existing Structure and EOT
Crane for 7 Ton Project (DETAILED ENGINEERING) – CTR preparation
QGE-13081 - QG2 and QG3&4 Flare Reduction Project, Opp#8 - Potential QG Backup Supply Line to QP
QAFAC-ESA-040 - STUDY AND ENGINEERING FOR NATURAL GAS (NG) FILTER
QAFAC-ESA-042 - FEED Package for ZERO LIQUID DISCHARGE (ZLD)
QP-EPIC for Hamad International Airport Jet A-1 Supply Project
Qatargas - QG-15013 - HVAC upgrade at CSP
Job Description
Perform Civil Design and Analysis calculations using applicable codes and internationally accepted
practices.
Prepares scope of work.
Provides sketches for own detailed civil designs.
Review and recommend approval of contractors design and shop drawings.
Answers technical queries of contractors.
Preparation of design basis and specification.
Basic Engineering, EPC and Long Term EPCm for plant maintenance.
Analyzes existing or proposed process,utilities, storage and other support systems for the off-shore
production facilities and onshore plant.
Works with other specialist discipline engineers in the maintenance and updating of engineering drawings,
standards,specifications,manual, and data books.
Prepares CTR proposals for various projects.
Responsible for the development and execution of engineering design packages ;
Site visit / field verification based on project requirements;
Reviewing Vendor drawings, documentation, NMRs and quotations;
Coordination of engineering and design activities with other disciplines; and
Responsible for the development and execution of engineering design packages;
Involved in engineering development works for various civil projects;
3. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 3 of 9
Design input requirement report, participating in Kick-Off Meetings of projects, information gathering and
query raising;
Preparation of design basis and load calculations, site visits and coordination with Clients, attending design
Progress Meetings;
Structural calculations in Microsoft Excel, structuralcalculations in STAAD Pro, in SAP2000.
Foundation design and checking in Risa Foundation and Foundation 3D.
Preparation of engineering mark-up drawings, drafting arrangements and supervising, design review and
checking;
Preparation of Material Take-Off Lists;
Preparation of estimates;
Vendor coordination and design checks, preparation of Contractor scopes ofwork, detailed design package
final squad checks,delivery of design package arrangements;
Design query clarifications and clearances, updating Client comments;
Design package final submission and acquiring acceptances;
Site visit / field verification based on project requirements;
Reviewing Vendor drawings, documentation, NMRs and quotations; and
Coordination of engineering and design activities with other disciplines.
Previous Employment
From : Sept. 23, 2012 - Dec. 23, 2013
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Project Engineer - Civil/Structural (Secondment at Q-Chem.)
Project/s Involved:
TWR-01-0939 - Engineering Services for Turnaround Laydown Yard Project (FEED STAGE)
TWR-01-0944 - Engineering of TRANSSHIPMENT YARD ( FEED STAGE )
TWR-00-0652 - PLANT BLAST RESISTANT BUILDINGS
TWR-00-1203 - ADDITIONAL PAVED ROADWAY FOR EMERGENCY GATE ACCESS
TWR-04-1195 - PERMANENT PEDESTAL AND CONTAINMENT FOR CORROSION INHIBITOR
TANKS IN POLYETHYLENE UNIT
TWR-00-1101 - PROVISION OF SHADE COVERS FOR QCHEM ASSEMBLY POINTS
TWR-04-1129 - Provide shaded area for storing raw chrome catalyst drum storage in Activator Area.
TWR-15-1134 - CATALYST PREPARATION AND SURGE TANK DIKES
TWR-00-1149 - Enclosure of Q-Chem Materials WHS and QII Capital Spares WHS Shaded areas.
TWR-00-1184 - Fireproofing of exposed pipe supports.
TWR-00-1205 - Fire Proofing Of Steel Structures in Q-Chem.II
4. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 4 of 9
Job Description
Lead the project through complete project cycle (from Basic Design) till commissioning and handover.
Technical and financial close out of the project.
Assisting in closing warranty issues and technical dispute with the engineering consultant and construction
contractor.
Develop work schedules,assigns and monitors designers/draftsman activities.
Preparation of operating and capital improvement program budgets.
Structural calculations in Microsoft Excel, structuralcalculations in STAAD Pro, in SAP2000.
Foundation design and checking in Risa Foundation and Foundation 3D.
Preparation of engineering mark-up drawings, drafting arrangements and supervising,design review and
checking;
Coordinates engineering work with other department, contractors and end users.
Organizes drafts and coordinates technical documents.
Perform Civil Design and Analysis calculations using applicable codes and internationally accepted
practices.
Prepares scope of work and AFD/AFE.
Provides sketches for own detailed civil designs.
Perform field activities such as observed and record existing field conditions, take and verify measurements
within projects area.
Review and recommend approval of contractors design and shop drawings.
Answers technical queries of contractors,operations and maintenance group.
Previous Employment
From : Mar 28, 2010 – Sept. 22, 2012
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Civil/Structural Engineer
Project/s Involved:
RasGas Helium II Project (RHX Project – RFS-027) - Lead
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe racks and Foundations, Design of
Equipment Foundations (Cold Box, Heater, pumps and transformer), Cable Trench Route and Duct Banks for
Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for Electrical and Instrument,
Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and Vendor Prints, Attend Internal
& Client Meetings,Conduct Site Surveys and Construction Supports.
Qatargas Helium Project (QHE Project) - Member
Design of Equipment Foundations (Cold Box & Heater)
Offshore Crane Tip Maintenance Project (RFS-014) - Member
Design of New Platforms (Riser, Wellhead 1 to 5, 7 & 9), Preparation of drawings & BOQ. Conduct Offshore Site
Survey.
5. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 5 of 9
Modification of Manual Valves to Remote Operated Valves RGCP-345 (RFS-030) - Member
Attend Kickoff Meeting with Client and Prepare related documents for Site Survey.
Expansion & Modification of Laboratory Building (RGCP-259 – RFS-024) - Member
Attend Pre-Bid Meeting with Sub-contractors and Prepare related documents for Site Survey.
FAU (Flow Assurance) Onsite MEG Storage Tank Replacement RGCP-329 (RFS-054) - Lead
Design of New Pipe Stanchions and Foundations, Design of Equipment Foundations (Pumps and Vessel), Cable
Trench Route and Duct Banks for Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for
Electrical and Instrument, Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and
Vendor Prints, Attend Internal & Client Meetings, Conduct Site Surveys and Construction Supports.
AGI Diversion Interconnect Header Project (RFS-057) - Member
Existing Pipe rack modifications, Existing Foundation Check, Preparation of drawings and BOQ.
MEG Regeneration Unit OBL FEED (RFS-061) - Lead
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe racks and Foundations, Design of
Equipment Foundations (Cold Box, Heater, pumps and transformer), Cable Trench Route and Duct Banks for
Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for Electrical and Instrument,
Preparation of drawings and BOQ, Attend Internal & Client Meetings.
Replacement of TGT Quencher and Absorber Column
(39-C 201 & 202) Project, Train 3 (RGCP-411 - RFS-056A) - Lead
Design Check for Vessel Foundation, Preparation of New Platform drawings and BOQ, Review of Fabrication
drawings and Vendor Prints and Construction Supports.
AKG Additional Power Feeder (RGCP-454 – RFS-080) - Lead
Design Check for Transformer, Cable Trench Route and Duct Banks for Electrical, Roads and Pavements,
Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and Vendor Prints, Attend Internal
& Client Meetings,Conduct Site Surveys and Construction Supports.
FEED Enhanced Continuous Emissions Monitoring Systems (CEMS) Project (RGCP-461 – RFS-084) -
Member
Conduct Site Surveys and gathering related documents.
QatarGas-23 Combined Projects (Project #5, 20 to 23) - Member
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe Supports, Preparation of drawings
and BOQ, Conduct Site.
6. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 6 of 9
From : Oct. 8, 2008 – Oct. 8, 2009
Company : SYRCONSULT INTERNATIONAL BAHRAIN
Position : Structural Engineer
Project/s Involved:
45 Storeys Residential and Commercial Building
22 Storeys Residential and Commercial Building
32 Storey office Building
24 Storey Office Building
50 Storey Office Building
36 Storey Building
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas.
Conduct Technical Studies & Analysis.
Carry out Civil Structural Technical consultancy.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and
AutoCAD.
Prepare detailed Estimates,
Evaluate Billing of Contractors and Construction Documents using Microsoft Office (Power Point 2003,
Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Aug 16, 2006 - Aug 16, 2008
Company : DALLAH TRANS ARABIA CO. LTD. (ARAMCO Project)
Position : Structural Engineer
Project/s Involved:
5 units two residential villas (Dharan, Aramco Compound)
4 Storey office building (Dharan, Aramco Compound)
2 Storey office building (Dharan, Aramco Compound)
10 units three storey villas (Dharan, Aramco)
3 Storey office & conference bldg. (Riyadh, Aramco)
10 units 2 storey villas (Riyadh, Aramco)
4 units 2 storey office bldg. (Riyadh, Aramco)
5 units 3 storey villas (Jeddah, Aramco)
4 storey bldg. (Jeddah, Aramco)
2 storey office bldg. with basement (Jeddah, Aramco)
3 storey conference hall (Jeddah, Aramco)
7. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 7 of 9
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas (Jeddah/Riyadh/Yanbu & Rabigh).
Conduct Technical Studies & Analysis.Carry out Civil Structural Technical consultancy.
Widen frame work aspects in making conclusion to clarify the safety resources as per Saudi Aramco
Engineering standard.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and Micro
station V8.
Prepare detailed Estimates,
Evaluate Billing of Contractors.
Construction Documents using Microsoft Office (Power Point 2003, Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Apr 8, 2000 - Aug 10, 2006
Company : MANUEL N. CHIEW, ARCHITECTS & ENGINEERS
Position : Structural Engineer/Office Civil Engineer/Project Inspector
Project/s Involved:
3 storey 10-door apartment (Davao City, Philippines)
72 units 2 storey Mormons church (Philippines)
7 storey commercial bldg. (Davao City, Philippines)
1 Hectare 3 storey mall (Davao city, Philippines)
12 storey steel structure commercial bldg. (Davao City, Phil.)
10 storey commercial bldg. (Davao City, Phil.)
4 units 2 storey warehouse bldg. (Davao City, Phil.)
5 storey commercial bldg. (General Santos City, Phili.)
10 units 2 storey school bldg. (Palo, Leyte, Phil.)
20 units 2 storey residential bldg. (Davao City)
12 storey hotel (Davao City, Phil.)
2 storey Polyclinic – Digos City, Phil.)
5 units 3 storey commercial bldg. (Davao City, Phil.)
5 units 6 doors apartment (Davao City, Phil.)
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas.
Conduct Technical Studies & Analysis.
Carry out Civil Structural Technical consultancy.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and
AutoCAD.
Prepare detailed Estimates,
8. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 8 of 9
Evaluate Billing of Contractors and Construction Documents using Microsoft Office (Power Point 2003,
Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Mar 16, 1998 - Apr 5, 2000
Company : MONOLITHIC CONSTRUCTION & DEVELOPMENT CORP.
Position : Office Civil Engineer/Project Material Engineer
Project/s Involved:
10 Km – 2 lane highway roads (Mindanao, Phil)
10 units pedestrian overpass (Davao City, Phil)
30 Lm bridge extensions (Mindanao, Phil.)
5 km – 4 lane road (Mindanao, Phil.)
4 units – 3 storey office bldg. (Mindanao, Phil.)
10 units – 2 storey school bldg. (Mindanao, Phil.)
Job Description
Prepare detailed Estimates.
Construction Documents using Prima Vera and Microsoft Office (Power Point 2003, Excel and Word).
Attend Pre-Bidding and Bidding Conferences.
Supervised/Monitormaterial control of the Project.
Prepare detailed architectural and structural plans and revisions including standard plans using AutoCAD
Release 2004, 2002, 2000, 14 & 12.
From : Jan 9, 1995 - Mar 2, 1998
Company : COUNTRYWIDE SHELTERS, INCORPORATED
Position : Office Civil Engineer/Project Material Engineer
Project/s Involved:
50 units – low cost housing (Davao City, Phil.)
7 storey hotel (Mindanao, Phil.)
2 units – 2 storey residential bldg. (Davao City, Phil)
4 storey commercial bldg. (Davao City, Phil.)
Job Description
Prepare detailed Estimates.
Construction Documents using Prima Vera and Microsoft Office (Power Point 2003, Excel and Word).
Attend Pre-Bidding and Bidding Conferences.
Supervised/Monitoring of the Project.
Prepare detailed architectural and structural plans and revisions including standard plans using AutoCAD
Release 2004, 2002, 2000, 14 & 12.
9. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 9 of 9
EDUCATION / QUALIFICATION
Lifetime Member for Philippines Institute of Civil Engineers
Registered in the Committee of Engineering Professional Practice in Kingdom of Bahrain as Category A
TRAINING
Apr 26, 1999- Apr 30, 1999 - Seminar/Workshop on Material Quality Control in Field Testing for
Contractors
Jun 10, 2012- Jun 14, 2012 - Seminar/Workshop on Bentley Institute for Structural Analysis Computer
System (SACS) Software.
Jul 08, 2012- Jul 12, 2012 - Seminar/Workshop on Bentley Institute for Advance Structural Analysis
Computer System (SACS) Software.
SOFTWARE EFFICIENCY
SAP2000
ETABS
STAAD Pro V8i
SACS
Risa Foundation
Foundation 3D
Auto CAD
Micro station
MathCAD
Micro soft Office
OTHER INFORMATION
Languages Known : English, Tagalog and basic Arabic.