This document provides information about Ingersoll Rand ARO's new ARO-Flo Series of filters, regulators, and lubricators (FRLs). It summarizes that the ARO-Flo Series sets new standards for safety, performance, and modularity in FRL design. Flow tests showed the 1/4" ARO-Flo regulator had 38% better flow than competitors. The document also provides details on the features and specifications of the different ARO-Flo Series sizes and accessories.
The document provides instructions for installing and operating a Type C404-32 internal valve. It describes the valve components and accessories that are covered. It provides warnings about proper installation and maintenance according to codes to prevent explosions. The summary should install the valve according to the instructions, ensure proper actuation and excess flow operation, and always close the valve except during product transfer to safely control the system.
This document describes an airline accessories catalog featuring the ARO-Flo series of air preparation products, including filters, regulators, lubricators, and other accessories. The ARO-Flo series provides clean, regulated air for pneumatic tools through high-performing, modular components. Key features include superior air flow, easy assembly/disassembly, and integrated safety components. The catalog provides product specifications and ordering information for the various ARO-Flo filter, regulator, lubricator, and accessory options.
This document provides information on Balflex hydraulic hoses and general safety guidelines. It describes Balflex as an international group that produces flexible hoses, fittings, and connectors to high quality standards. The document outlines Balflex's quality processes and certifications. It then provides details on Balflex hydraulic hoses, including general guidelines on applications, specifications, and safety considerations like preventing high pressure leaks and whip cracking.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
This document provides safety guidelines for selecting and using hoses, fittings, and related accessories. It warns that failure or improper selection can cause death, injury or property damage. It advises analyzing all system aspects and stresses that the user is solely responsible for the proper selection and safety of the system. The document also provides instructions on considering electrical conductivity, working pressure limits, and distributing safety information to all users.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Flowserve, under their Valtek brand, developed a control valve that combines a number of useful design features. The MaxFlo 4 is an eccentric rotary plug valve intended for fluid control operations. The valve has some attractive design features.
The document provides instructions for installing and operating a Type C404-32 internal valve. It describes the valve components and accessories that are covered. It provides warnings about proper installation and maintenance according to codes to prevent explosions. The summary should install the valve according to the instructions, ensure proper actuation and excess flow operation, and always close the valve except during product transfer to safely control the system.
This document describes an airline accessories catalog featuring the ARO-Flo series of air preparation products, including filters, regulators, lubricators, and other accessories. The ARO-Flo series provides clean, regulated air for pneumatic tools through high-performing, modular components. Key features include superior air flow, easy assembly/disassembly, and integrated safety components. The catalog provides product specifications and ordering information for the various ARO-Flo filter, regulator, lubricator, and accessory options.
This document provides information on Balflex hydraulic hoses and general safety guidelines. It describes Balflex as an international group that produces flexible hoses, fittings, and connectors to high quality standards. The document outlines Balflex's quality processes and certifications. It then provides details on Balflex hydraulic hoses, including general guidelines on applications, specifications, and safety considerations like preventing high pressure leaks and whip cracking.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
This document provides safety guidelines for selecting and using hoses, fittings, and related accessories. It warns that failure or improper selection can cause death, injury or property damage. It advises analyzing all system aspects and stresses that the user is solely responsible for the proper selection and safety of the system. The document also provides instructions on considering electrical conductivity, working pressure limits, and distributing safety information to all users.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
Flowserve, under their Valtek brand, developed a control valve that combines a number of useful design features. The MaxFlo 4 is an eccentric rotary plug valve intended for fluid control operations. The valve has some attractive design features.
Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly. LIned ball valves deliver high levels of corrosion resistance.
This document provides information on valve technology from GEA for aseptic and hygienic applications. It describes various valve types including aseptic single-seat valves, aseptic double-seat valves, aseptic sampling valves, hygienic single-seat valves, hygienic double-seat valves, and hygienic butterfly valves. It provides details on the functionality, uses, design characteristics, housing, internal assembly, and actuator for each valve type. Dimensional drawings and specifications are also included.
The document provides information on P1D series pneumatic cylinders with built-in valves from Parker Hannifin Corporation. It describes the P1D cylinders that can be ordered with a factory-fitted pneumatic or electric valve and tubing, creating a compact working unit. These units are suitable for applications in silos, operating flaps/valves, sawmills, and other installations where cylinders are scattered or fast actuation is important. Technical specifications are provided for the valves, cylinders, and accessories. Dimensions for the cylinders are also listed.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
This document summarizes the Warren Controls ILEA series of industrial linear electric actuators. It describes the small, medium, and large frame sizes available, with thrust forces ranging from 450 to 5,600 pounds. The actuators can withstand temperatures up to 158 degrees Fahrenheit and have IP65 and IP67 enclosure ratings. The document provides specifications for the ILEA-F small frame and ILEA-A/B medium frame actuators.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
This document provides specifications for Trane vertical upflow and horizontal left air handlers ranging from 1.5 to 4 tons. It includes details on:
- Features like convertible configurations, insulation, drain pans, filters, motors, and controls
- Performance data charts showing airflow in CFM for different static pressures and voltages
- General data on each model including coil details, fan specifications, electrical data, dimensions, and weights
- Wiring diagrams and installation instructions are also included.
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
Designers and manufacturers of industrial boilers are focused on meeting regulatory and safety requirements when developing highly efficient burner management systems (BMS). BMS are responsible for startup, operation and shutdown of a burner boiler systems. BMS monitor temperature, pressure and flow and employs safety shutoffs to shut down the burner boiler if an unsafe condition occurs.
This document provides standard specifications for pipe, valves, and fittings for Andes Petroleum Ecuador Ltd. It outlines requirements for materials, fabrication, welding, inspection, testing, and identification. The specifications cover piping classes from ANSI 150 to 900 and include requirements for pipe, fittings, flanges, valves, and other components. The document has been revised 3 times, with the last revision in 2011 adding new material specifications and updating requirements throughout.
Air Relay Pressure Switches are used in highly flamable Industrial applications area, where only pneumatic signal has to be controlled in ON-OFF mode, without any electrical supply, these are also knwn as Air operated Pressure Switches & Air operated Pressure Switches.
Supply Air pressure : 7 bar
Settable Range : 0.067 up to 25 bar
Output : NO / NC Pneumatic
Set Point : Field Settable
Enclosure : IP 66
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
All EXP Series pumps are enhanced with electronic interface capability, providing accurate, electronically controlled dosing. Combine our pump with the ARO Controller or a PLC or PC based system and switch from inaccurate, inefficient manual processes to intelligent fluid management.
4006_Pressure Independent Control Valves_enJaison J
The document describes the HERZ 4006 SMART pressure independent balancing control valve (PIBCV). It is a compact valve that combines the functions of a control valve, balancing valve, differential pressure regulator, and shut-off valve. It precisely controls flow rates for central building control systems, compensating for variations in pressure. It allows for reduced planning efforts for building control systems by combining multiple valve functions into one unit.
PT. Hazelindo Pratama is an Indonesian company established in 2008 that specializes in manufacturing oil and gas equipment. The company has experience in research and development, engineering design, and adheres to QHSE regulations. It produces various wireline units and hydraulic power packs that are used in bottom hole surveillance operations. The company has completed many projects for oil and gas clients in Indonesia and other countries.
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
Safe and SterileThe 48 TuBore Series is the Habonim line of clean ball valves for the pharmaceutical and bioprocessing industries. These valves are designed for applications which require maximum flow capacity at minimum pressure drop, where sterility, clean-ability and drain-ability are essential for faultless product quality. The 48 TuBore valve port matches tube ID dimensions, provides tight shutoff and has exceptional performance in many service applications
Integrated features:
Tube bore
Soft parts are FDA approved
Low ferrite
Low sulphur
Outstanding metal surface finish. A fully encapsulated body seal provides an improved seal under fluctuating temperatures and pressures
The document provides an overview of valve and actuator products from a company that has been developing, producing, and selling industrial valves and actuators for over 40 years. It employs around 1,000 people across multiple production locations and subsidiaries globally. The company offers a wide range of valve types, including resilient seated valves, PTFE valves, high performance valves, knife gate valves, and special application valves. It prides itself on outstanding quality and customized solutions through precise coordination of valves, actuators, and automation technology.
The 1/4" non-metallic diaphragm pump from ARO can pump up to 5.3 gpm with a maximum pressure of 125 psi. It has a 1/4" female air inlet and 1/4" NPTF/BSPT internal fluid inlet/outlet with a 3/4" - 14 NPTF/BSPT external thread. The pump weighs between 2.86-3.88 lbs depending on material (polypropylene, PVDF, or acetal) and can handle up to 1/16" solids with a maximum dry suction lift of 15 feet.
This document discusses Cummins Filtration's HF6500 Series hydraulic filters. It provides specifications for two styles of the HF6500 including maximum static pressure, recommended working pressure, seals, and service clearance. Style A uses NPT port connections while Style B uses BSP port connections. The document also provides ordering information including available filter heads, port sizes, bypass settings, rated flows, and applications.
Atomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly. LIned ball valves deliver high levels of corrosion resistance.
This document provides information on valve technology from GEA for aseptic and hygienic applications. It describes various valve types including aseptic single-seat valves, aseptic double-seat valves, aseptic sampling valves, hygienic single-seat valves, hygienic double-seat valves, and hygienic butterfly valves. It provides details on the functionality, uses, design characteristics, housing, internal assembly, and actuator for each valve type. Dimensional drawings and specifications are also included.
The document provides information on P1D series pneumatic cylinders with built-in valves from Parker Hannifin Corporation. It describes the P1D cylinders that can be ordered with a factory-fitted pneumatic or electric valve and tubing, creating a compact working unit. These units are suitable for applications in silos, operating flaps/valves, sawmills, and other installations where cylinders are scattered or fast actuation is important. Technical specifications are provided for the valves, cylinders, and accessories. Dimensions for the cylinders are also listed.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
This document summarizes the Warren Controls ILEA series of industrial linear electric actuators. It describes the small, medium, and large frame sizes available, with thrust forces ranging from 450 to 5,600 pounds. The actuators can withstand temperatures up to 158 degrees Fahrenheit and have IP65 and IP67 enclosure ratings. The document provides specifications for the ILEA-F small frame and ILEA-A/B medium frame actuators.
Rupture Disc Products For Industrial Process SafetyCTi Controltech
Built on years of research and development, the HPX® and SANITRX HPX® Rupture Discs (bursting discs) are high precision pressure relieving devices that protect personnel, equipment and the environment. The versatility of the HPX® product family offers pressure protection for a wide range of applications in many processing industries, including: chemical, oil and gas, food, beverage, pharmaceutical, biotech, pulp and paper, power and more.
This document provides specifications for Trane vertical upflow and horizontal left air handlers ranging from 1.5 to 4 tons. It includes details on:
- Features like convertible configurations, insulation, drain pans, filters, motors, and controls
- Performance data charts showing airflow in CFM for different static pressures and voltages
- General data on each model including coil details, fan specifications, electrical data, dimensions, and weights
- Wiring diagrams and installation instructions are also included.
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
Designers and manufacturers of industrial boilers are focused on meeting regulatory and safety requirements when developing highly efficient burner management systems (BMS). BMS are responsible for startup, operation and shutdown of a burner boiler systems. BMS monitor temperature, pressure and flow and employs safety shutoffs to shut down the burner boiler if an unsafe condition occurs.
This document provides standard specifications for pipe, valves, and fittings for Andes Petroleum Ecuador Ltd. It outlines requirements for materials, fabrication, welding, inspection, testing, and identification. The specifications cover piping classes from ANSI 150 to 900 and include requirements for pipe, fittings, flanges, valves, and other components. The document has been revised 3 times, with the last revision in 2011 adding new material specifications and updating requirements throughout.
Air Relay Pressure Switches are used in highly flamable Industrial applications area, where only pneumatic signal has to be controlled in ON-OFF mode, without any electrical supply, these are also knwn as Air operated Pressure Switches & Air operated Pressure Switches.
Supply Air pressure : 7 bar
Settable Range : 0.067 up to 25 bar
Output : NO / NC Pneumatic
Set Point : Field Settable
Enclosure : IP 66
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
Combining Rupture Discs and Safety Relief ValvesCTi Controltech
Isolating a relief or safety valve from the process media through the installation of a rupture disc upstream of the valve inlet will eliminate exposure of the costly valve to effects of the media.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
All EXP Series pumps are enhanced with electronic interface capability, providing accurate, electronically controlled dosing. Combine our pump with the ARO Controller or a PLC or PC based system and switch from inaccurate, inefficient manual processes to intelligent fluid management.
4006_Pressure Independent Control Valves_enJaison J
The document describes the HERZ 4006 SMART pressure independent balancing control valve (PIBCV). It is a compact valve that combines the functions of a control valve, balancing valve, differential pressure regulator, and shut-off valve. It precisely controls flow rates for central building control systems, compensating for variations in pressure. It allows for reduced planning efforts for building control systems by combining multiple valve functions into one unit.
PT. Hazelindo Pratama is an Indonesian company established in 2008 that specializes in manufacturing oil and gas equipment. The company has experience in research and development, engineering design, and adheres to QHSE regulations. It produces various wireline units and hydraulic power packs that are used in bottom hole surveillance operations. The company has completed many projects for oil and gas clients in Indonesia and other countries.
Industrial process control often requires the measurement of liquid inventory volume or mass. If the material is contained within a tank of known shape and dimensions, the volume can be determined accurately by measuring the level of the liquid. Various means are used to determine the liquid level. One of the simplest is the downpipe sensor, sometimes referred to as a "bubbler". King-Gage is manufacturer of industrial downpipe liquid level measuring devices. The slides provide graphic depictions of how the systems function and provide an overview of several product configurations.
Safe and SterileThe 48 TuBore Series is the Habonim line of clean ball valves for the pharmaceutical and bioprocessing industries. These valves are designed for applications which require maximum flow capacity at minimum pressure drop, where sterility, clean-ability and drain-ability are essential for faultless product quality. The 48 TuBore valve port matches tube ID dimensions, provides tight shutoff and has exceptional performance in many service applications
Integrated features:
Tube bore
Soft parts are FDA approved
Low ferrite
Low sulphur
Outstanding metal surface finish. A fully encapsulated body seal provides an improved seal under fluctuating temperatures and pressures
The document provides an overview of valve and actuator products from a company that has been developing, producing, and selling industrial valves and actuators for over 40 years. It employs around 1,000 people across multiple production locations and subsidiaries globally. The company offers a wide range of valve types, including resilient seated valves, PTFE valves, high performance valves, knife gate valves, and special application valves. It prides itself on outstanding quality and customized solutions through precise coordination of valves, actuators, and automation technology.
The 1/4" non-metallic diaphragm pump from ARO can pump up to 5.3 gpm with a maximum pressure of 125 psi. It has a 1/4" female air inlet and 1/4" NPTF/BSPT internal fluid inlet/outlet with a 3/4" - 14 NPTF/BSPT external thread. The pump weighs between 2.86-3.88 lbs depending on material (polypropylene, PVDF, or acetal) and can handle up to 1/16" solids with a maximum dry suction lift of 15 feet.
This document discusses Cummins Filtration's HF6500 Series hydraulic filters. It provides specifications for two styles of the HF6500 including maximum static pressure, recommended working pressure, seals, and service clearance. Style A uses NPT port connections while Style B uses BSP port connections. The document also provides ordering information including available filter heads, port sizes, bypass settings, rated flows, and applications.
Parker Balston is a division of Parker Hannifin, world’s leading diversified manufacturer of motion and control technologies and systems. Balston manufacturers industrial filters and filtration technology, replacement filter elements, compressed air dryers, nitrogen generators, and compressed air microbial detection.
This document provides instructions for properly selecting a fan or blower. It outlines 9 key steps to select the appropriate fan type, total airflow, static pressure, density, temperature, altitude, material handling considerations if applicable, ambient temperature range, and safety classification. The instructions describe factors to consider such as temperature and pressure corrections based on operating conditions. Cautions are provided about rotating equipment and ensuring proper guards are used.
The document provides an installation manual for Floco positive displacement meters. It discusses safety precautions, typical installation configurations including mounting on separators and flow lines, startup procedures, and proving methods. The meters work by separating fluid into segments and counting the segments as they pass through. Accuracy is affected by factors like fluid viscosity and meter component materials. Installation should include isolation valves and a bypass to allow operation if repairs are needed.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
Catalog DOMEL - Brushless Motors and BlowersPeter Korosec
The document discusses brushless blowers/pumps manufactured by Domel. It provides details on their construction, applications in industries like manufacturing and medicine, and specifications for different models. Domel offers brushless blowers in various sizes from 135mm to 244mm in diameter with power ratings up to 1800W. They are characterized by compact design, high efficiency, precise control, and can be used for applications like fume extraction, printing machines, medical devices, and more.
This document provides design details and specifications for FluoroSeal non-lubricated plug valves. Key features include:
1) The valves use PTFE fluorocarbon for the sleeve and top seal components, which provides a leak-free seal that is resistant to corrosion from chemicals.
2) The internal body and port design fully contain and protect the PTFE sleeve.
3) Adjustment bolts provide a balanced force to maintain multiple seals between the plug and body, ensuring a bubble-tight seal.
Sullair screw air compressor as 04 - 110kWAlexander Chan
Sullair is a manufacturer of compressed air systems that aims to lower operating costs and maximize return on investment for customers. They offer complete compressed air solutions to help users reduce costs and improve productivity. Sullair distributors can provide information and help satisfy special requirements for compressed air systems. Sullair's product line includes screw compressors from 4-110kW that are designed for reliability, efficiency and performance to meet customer needs.
The document is an Ingersoll Rand lubrication equipment catalog that describes their various pump models, including piston pumps for grease and oils. It provides details on their LM series piston pumps, which are built for industrial strength and durability. The pumps are available in various ratios and flow rates to suit different applications and container sizes. Ingersoll Rand also offers complete pump packages that bundle the necessary pumps, hoses, meters, and accessories.
What is a flowmeter ?
Simply a device that can monitor and measure the actual amount of ‘product’ being sent through it. Typically flowmeters in industry are used for monitoring use of water, chemicals, ingredients, etc.
This document provides information on Ingersoll Rand's R-Series rotary screw compressors. It discusses the company's history of over 100 years of compressed air innovation and the reliability and efficiency of the R-Series compressors. The R-Series compressors come in both fixed and variable speed drive options, have a compact design, and increased reliability, efficiency, and productivity. They can also be purchased as part of a Total Air System package with an integrated dryer and other components.
Asco Series 551, 552, 553, Pilot Solenoid Valves, Atex Hazardous Areas - Proc...Thorne & Derrick UK
The document discusses pilot valves used in process industries. It provides information on:
1) Pilot valve interfaces including direct mounting on actuators according to the NAMUR standard and remote mounting. Direct mounting provides optimal flow and speed while remote mounting requires consideration of tubing size.
2) Pilot valve functions for single-acting and double-acting actuators, including 3/2 and 5/2 functions.
3) Factors that determine actuator and process valve response times including pilot valve flow, actuator volume, and operating pressure. The CEN standard provides guidance on pilot valve sizing based on actuator volume.
This document provides installation instructions for a 4-channel, 400-point modular parison controller. It discusses mounting the controller components separately from the machine's electrical cabinet for better ventilation and protection. It also recommends short cable lengths for transducers and valves while avoiding noise, heat, and damage risks. The document provides guidelines for hydraulic installation, filtration, and manifold mounting to the programming cylinders. Clean oil filtration down to 14/11 ISO code is advised for reliable servo valve performance.
This document provides information on various piston compressor models from Ceccato Aria Compressa. It describes aluminum and cast iron cylinder piston compressors ranging from 6 liters to 500 liters and 2 HP to 10 HP. Belt driven, direct driven, and silenced models are detailed. Features like pressure switches, reducers, and wheels/handles are highlighted. Technical specifications including voltage, pressure, flow rates, and dimensions are provided for each model series.
The document is a price list from Flomatic Corporation that highlights several new products, including:
1) Model 80E-VFD check valves designed for use with variable frequency drive pumps to minimize flow losses and hydraulic shocks.
2) Model 888S6/888S6R stainless steel wafer style check valves available in 2"-8" sizes.
3) Model 82DI-VFD check valves with male x male threads for connecting pumps to pipes in 2 1/2", 4", and 5" sizes.
Tubería para distribución de aire comprimido TESEO AIRAlmacenes JJ S.A.
Este documento presenta el sistema de tuberías de aluminio Teseo para la distribución de fluidos. Describe brevemente la historia de la empresa Teseo y cómo desarrolló el primer sistema modular de perfil de aluminio para distribución de aire comprimido. A continuación, enumera varios sistemas de tuberías y accesorios de Teseo como HBS, AP, ATS y otros. Finalmente, destaca las ventajas de los sistemas Teseo como su ligereza, robustez, bajas pérdidas y facilidad de modificación
This document provides technical specifications for particulate filters (CPF-20 and CPF-80) that remove mists and particulates from compressed breathing air for one to four operators. The CPF filters feature a pressure regulator, mounting options, and replaceable filter cartridges that last up to three months. They are used between a compressed air source and respirator to clean the air before it reaches the respirator.
The document provides technical specifications for the Apollo 600 HP supplied-air respirator helmet. It describes the respirator's components, including the adjustable suspension system, multi-lens window for visibility, and variety of air control devices. It also outlines requirements for compressed breathing air supply and notes the respirator is NIOSH-approved and meets OSHA standards for abrasive blasting applications. Replacement parts and accessories are listed.
This document provides information about various condensate cleaners from PURO, including the ENVIRO (65 cfm), PURO (300 cfm), PURO GRAND (1250 cfm), and PURO GRAND Xtender (2500 cfm). It describes their features and specifications, how they work to separate oil from condensate, and answers common questions about condensate cleaning and older separator models.
The document summarizes Heat-of-Compression (HOC) air dryers from Ingersoll-Rand. HOC dryers are the most energy efficient dryers that use recovered heat from air compression to dry the air. They provide dry air using virtually no energy. The H-Series dryer requires only 24 watts to power controls while the HC-Series provides extremely low dew points below -40°F through a stripping and cooling cycle. Both dryers minimize moisture problems and costs while maximizing reliability, productivity, and safety.
Ingersoll Rand offers a line of modular compressed air dryers that provide clean, dry air for industrial applications in an efficient and affordable manner. The dryers use high-efficiency filtration and desiccant beds to minimize moisture and contaminants in compressed air, helping to prevent corrosion and disruptions from moisture. They install at the point-of-use so customers only pay to dry the air they need. The compact, modular dryers also have low maintenance needs and noise levels, helping to extend their reliable performance over the long-term.
The Nirvana cycling refrigerated air dryer provides significant energy savings compared to traditional non-cycling dryers by only operating its refrigeration system to match incoming heat loads. It has been designed for both durability and maximum energy efficiency through its system design and efficient components. This results in the most energy efficient cycling refrigerated dryer available.
This document discusses Ingersoll Rand refrigerated dryers. It describes the key features of their dryers including stainless steel heat exchangers that provide high efficiency heat transfer and low pressure drop. It also emphasizes the reliability of the dryers through minimal downtime and maintenance needs. The document provides specifications for their different dryer models ranging from 200 to 8,000 SCFM capacities.
Ingersoll Rand manufactures refrigerated air dryers that provide clean and dry compressed air for applications ranging from dry cleaning to manufacturing. The dryers use corrosion-resistant heat exchangers and efficient moisture separation to produce a steady supply of dry air, eliminating issues caused by wet air like ruined finishes or damaged equipment. The dryers are self-contained units that simply require piping into an air supply line. Ingersoll Rand offers dryers in standard and high temperature models to accommodate different inlet air temperatures.
The document summarizes Ingersoll Rand's F-Series compressed air filters. The filters are designed to provide clean, high-quality air through superior filtration technology and years of reliable performance. They reduce energy costs through low pressure drop and minimize maintenance needs. A variety of filter grades and sizes provides solutions for all compressed air filtration applications.
1) Ingersoll Rand manufactures industrial-grade impact sockets for automotive and heavy equipment maintenance and repair.
2) Their impact socket product line includes over 1,000 individual sockets and socket sets in various drive sizes and metrics.
3) The sockets are made of durable chrome-molybdenum steel and are laser-etched for easy identification even after extensive use.
Herramientas neumáticas y eléctricas Ingersoll RandAlmacenes JJ S.A.
Este documento es un catálogo de herramientas neumáticas de la marca Ingersoll Rand. Presenta una amplia variedad de martillos neumáticos, llaves de impacto, sockets y otros accesorios para trabajos industriales, de construcción y automotrices. Incluye especificaciones técnicas de cada producto y kits de herramientas estándar.
The document provides information about vehicle services and tools from Ingersoll Rand. It discusses Ingersoll Rand's comprehensive product line that includes complete compressed air systems, tools, pumps, and material and fluid handling systems. It also notes that Ingersoll Rand enhances productivity through Club Car golf and utility vehicles. The document contains contact information for Ingersoll Rand locations around the world and provides an overview of Ingersoll Rand's air impact tools, air ratchets, air grinders and other pneumatic tools.
The document is a catalog for assembly tools from Ingersoll Rand that includes electric screwdrivers and fastening tools. It provides specifications for various models of electric screwdrivers including torque range, speed, weight and dimensions. It also lists accessories such as balancers and bits that can be used with the screwdrivers. The catalog describes features of the screwdriver models such as adjustable torque control, ergonomic designs, and ESD protection for electronics assembly. It indicates that Ingersoll Rand tools provide precise torque and speed control for assembly applications.
The document is a catalog for AutoDrain's professional vehicle depollution equipment. It provides an overview of their mobile workshop equipment for draining coolant, oil, brake fluid and removing shock absorbers. It also describes their fuel recovery and storage equipment as well as workshop equipment for rapid fuel and fluid removal. AutoDrain offers training, design and installation support, and maintenance services to help customers comply with regulations.
The document describes an electronic timer-controlled condensate drain called the COMBO. It has an integrated mesh strainer and ball valve to simplify installation. The timer can be adjusted to drain condensate from various compressed air system components at intervals between 0.5 to 45 minutes. It has an IP65 rating and voltage options between 24 to 240 VAC/DC. The unit features a visual display, easy-grip adjusting knobs, and prevents air-locking during drainage.
Most compressed air systems experience unstable pressure from fluctuating demand which causes compressors to cycle frequently, increasing costs. IntelliFlow electronic flow controllers create an air buffer between supply and demand, allowing stored air to continuously stabilize pressure in response to fluctuations. This eliminates the need for extra compressors or higher pressures, reducing costs through stable supply, pressure protection of critical processes, balanced pressure across the system, avoided overpressure, reduced air consumption and compressor use, and increased reliability.
This document discusses Ingersoll Rand's X4I System Controller product. It can control up to four compressors to optimize their operation and reduce energy costs. It allows compressors to run only as needed to meet demand rather than keeping extra units idle. It can also minimize wasted energy from keeping air pressure higher than necessary. The document provides examples showing potential energy and cost savings of up to 32% annually from more efficient compressor control and management of artificial demand.
Este documento es un catálogo de productos de CLEMCO INTERNATIONAL, líder mundial en equipos de tratamiento de superficies por chorro abrasivo. El catálogo incluye equipos de chorro portátiles, arenadoras, pistolas, accesorios y sistemas para aplicaciones en sectores como naval, petroquímica, energías renovables y automoción. La empresa ha estado presente en España desde 1969 y ofrece servicio técnico desde su sede central y delegaciones regionales.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...shadow0702a
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
2. 2
Web site: fluids.ingersollrand.com
3
1/4" Regulator — Flow Test
60
50
40
30
20
10
0
Parker Wilkerson SMC Norgren ARO-Flo
38% better than the competition
CFM
For more than 100 years, Ingersoll Rand ARO
has been an industry leader in the design and
manufacture of compressors, pneumatic tools, and
air preparation equipment. Clean air is a key ingredient that enables effective and efficient
operation of tools, equipment, and machinery in almost every industry. As such, the use
of air preparation devices, such as filters, regulators, and lubricators (FRLs) is an excellent
means of keeping your air supply in top condition, as well as enabling your tools and
equipment to operate at their peak performance. The new ARO-Flo Series FRLs continue
the tradition of offering premium products for your operation, and also raises the bar in
the industry for safety, flow performance, and modularity.
Safety: Providing safe tools and equipment is
our top priority. ARO-Flo Series FRLs
are designed with integrated safety
features such as locking bowls and clear
multilingual markings. Accessories such
as lockout valves, check valves, and
soft-start valves allow the air supply to
be safely managed and controlled.
Performance: ARO-Flo Series FRLs set the standard for flow performance. Simply
put, air flows better through ARO-Flo filters, regulators, and
lubricators than almost any other other air filtration device. This
means less air is choked during the air preparation process, and
your equipment can perform at its peak performance.
Modularity: All ARO-Flo accessories are designed to integrate with each other
within each size range. From pipe adapters to T-brackets, your
complete FRL assembly and its individual components can be easily,
safely, and quickly assembled or disassembled with a minimum of
tools — no fuss or complications, even with fixed piping.
The following regulators were put throught head-to-head tests
to determine how they compare with the new ARO-Flo Series.
This is not the largest 1/4 regulator in the ARO-Flo Series, but rather the smallest. How did we do it? We designed the
ARO-Flo Series from the ground up to allow air to pass through the units with a minimum of flow loss. The bottom line:
If you want superior flow in your application, you can’t miss with the new ARO-Flo Series.
To obtain the actual test report, email your request to arowebleads.com.
Test parameters: 100 psi inlet pressure, 90 psi set pressure, and 33 psi drop
Best in class
ARO-Flo Series
Manufacturer Model Number Flow Rate
Parker 14R118F 27 cfm
Wilkerson® R08-02-F0G0 44 cfm
SMC® AR20-N02E-Z 48 cfm
Norgren R72G-2AK-RMG 51 cfm
ARO-Flo R37121-620 59 cfm
How did we do? On average, the ARO-Flo 1/4 1000 Series regulator
flowed 38 percent better than the competition. All regulators were tested
under the same conditions, and all units were new — right out of the box.
R37121-620
3. 4
Web site: fluids.ingersollrand.com
5
Features and benefits
By utilizing a modular
lockout valve the
user can close off
the downstream
air supply for
maintenance and
pressure isolation.
Units are threaded
for direct plumbing or
can be installed in the
modular arrangement.
Use of modular
threaded pipe adapters
allow for ease of service
by allowing a unit to be
quickly removed from
the air line. Adapters
can be used to pipe
different thread sizes in
the plumbing setup.
The ARO soft-start
valve allows system
pressure to build
gradually, protecting
downstream equipment
and creating a safer
start-up condition.
The installation of a manifold
port block enables design
flexibility by allowing clean,
regulated air to be diverted
to other applications.
The pressure
switch is typically
threaded into
a manifold
port block,
and allows the
sensing of high
or low pressure
thresholds set
by the user.
The positive
locking thumb
switch engages
with an audible
click, and
visually aligns
to the locking
symbols.
Optional filter life indicator
works off of pressure differential
to show a visible alert when the
filter needs replacement.
A T-bracket
wall mount is
standard on
all combo units.
The auto-fill
option is
standard on
all ARO-Flo
lubricators.
Lubricating oil
can be added
while lubricators
are under
pressure.
1000 Series
1/8 and 1/4 Ports
Max flow: 59 scfm
Series size: Miniature
Page: 8
1500 Series
1/4 and 3/8 Ports
Max flow: 113 scfm
Series size: Compact
Page: 18
2000 Series
3/8, 1/2, and 3/4 Ports
Max flow: 222 scfm
Series size: Standard
Page: 28
3000 Series
3/4 and 1 Ports
Max flow: 368 scfm
Series size: Heavy-Duty
Page: 38
Super-Duty Series
1, 1-1/4, 1-1/2, 2 and 3 Ports
Max flow: 1,770 scfm
Series size: Super-Duty
Page: 48
Specialty Items
1/8, 1/4, 3/8, 1/2,
and 3/4 Ports
Specialty line
Page: 56
See our accessories
catalog or go to
our Web site for the
complete selection of
accessories for your
application.
1000Series1500Series2000Series3000SeriesSuper-DutySeriesSpecialtyItems
Accessories
Lubricating oil
29665
Manifold block kit
104413-3-2
Pressure switch
104415
Mounting brackets
104409
Replacement parts
104338
Gauges
104334
Refurb kits
104302
Spares and Accessories
The oil drip rate
is controlled
by adjusting
the sight dome
adjustment
screw in a
clockwise
or counter-
clockwise
direction.
The ARO-Flo check
valve is typically
installed downstream
of the regulator. It is
used to help prevent
downstream pressure
from moving upstream
of the valve in the
event of upstream
pressure loss.
A panel nut
is standard on
all ARO-Flo
regulators and
piggybacks.
Optional tamper
kit installs in seconds
and prevents
adjustment of the
regulated pressure.
The settable gauge
fan is a visual
reference that allows
the user to display
the specific pressure
range that is needed
for their application.
4. 6
Web site: fluids.ingersollrand.com
7
Combinations
Piggyback Filters / RegulatorsLubricators
Regulators
SelectionOverview
Installation
When selecting an FRL or individual filter, regulator and lubricator units, the air consumption of the tools or equipment to be serviced should be correlated
with the flow capacity of the FRL. ARO Filters, Regulators and Lubricators are designed to flow in excess of that indicated in the maximum
recommended flow table shown below. This table gives recommended flows for pipe sizes at listed pressures and should be used as a guide in sizing
piping and equipment for compressed air systems.
The filter, regulator and lubricator
should be installed in the order
shown in the illustration below.
If a coalescing filter is required,
it should be installed downstream
from a standard filter. Individual
take-off lines to the FRL and air
tool or equipment should be from
the top of the compressed air line.
Make sure that air flow markings
are followed for proper flow
direction through the FRL units.
To trap and expel water, sludge
and other contaninants which
may collect on the bottom of the
air line, a drip leg drain should
be used. Drip leg drains should
be installed at low points in the
piping system and at the far end
of the distribution system.
Maximum recommended air flow (scfm) thru ANSI standard weight Schedule 40 pipe
Applied
Pressure
PSIG
Nominal Standard Pipe Size — Inches
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3
5 0.5 1.2 2.7 4.9 6.6 13 27 40 80 135 240
10 0.8 1.7 3.9 7.7 11.0 21 44 64 125 200 370
20 1.3 3.0 6.6 13.0 18.5 35 75 110 215 350 600
40 2.5 5.5 12.0 23.0 34.0 62 135 200 385 640 1100
60 3.5 8.0 18.0 34.0 50.0 93 195 290 560 900 1600
80 4.7 10.5 23.0 44.0 65.0 120 255 380 720 1200 2100
100 5.8 13.0 29.0 54.0 80.0 150 315 470 900 1450 2600
150 8.6 20.0 41.0 80.0 115 220 460 680 1350 2200 3900
200 11.5 26.0 58.0 108.0 155.0 290 620 910 1750 2800 5000
250 14.5 33.0 73.0 135.0 200 370 770 1150 2200 3500 6100
Pressure Drop (∆P) per 100 ft. of Pipe Pipe Size — Inches
10% of Applied Pressure 1/8, 1/4, 3/8, 1/2
5% of Applied Pressure 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
The flow values in the chart above are based upon a pressure drop ( ∆P) as set forth in the following schedule:
Air line regulators provide controlled,
consistent air pressure as required for
specific pneumatic equipment connected to
the air system. All ARO-Flo regulators are
offered with a standard adjustment range
of 0 – 140 psig (0 – 9.6 barg). Alternative
spring ranges are offered for easy
conversion to suit different requirements.
Non-relieving regulators are offered
for applications where the venting of
downstream overpressure is undesirable.
ARO-Flo mist-type lubricators help ensure
that pneumatic devices receive the required
lubrication to maintain peak performance,
reduce wear, and prolong service life. They
are designed to provide the correct amount
of oil required for most general applications
in a pneumatic system, delivering a
constant ratio of oil to air flow. Precise oil
feed adjustment sets the proper oil drip
rate. Lubricators should be installed close
to the downstream application to ensure
effective distribution of oil.
Filter-regulators, or “piggybacks,”
combine the functions of both a filter
and regulator. Piggybacks are compact
and most effective when space is a
constraint. Piggybacks can be ordered
with different filter elements and can
be modified with different springs,
depending on the filtration and air
regulating requirements.
Filters, regulators, lubricators, and piggybacks can be combined
together to form combinations. They are typically strung together in
the F+R+L arrangement (three-piece combo) and F/R+L (two-piece
combo) arrangement, although other configurations are also used
depending on application needs. ARO-Flo combination FRLs are
easily assembled using modular spacer kits.
Filters
ARO-Flo compressed air filters are designed
to remove airborne solid and liquid
contaminants. Filters can be ordered with
different elements, including coalescing
models which are capable of removing oil
aerosols and particles down to 0.3 micron.
Standard filters are sold with 5-micron
elements; 40-micron elements can be
purchased and installed separately.
Compressed Air
Filter Lubricator
Shut-off
valve
Pneumatic tool
2000 Series
lockout valve
Drip leg
drain
Regulator
5. 8
Web site: fluids.ingersollrand.com
1/4 Pressure drop test
1/4 1000 SERIES FILTER
0
1
2
3
4
5
6
7
8
9
10
0 10 20 30 40 50 60
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0.5
0.6
0 5 10 15 20 25
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure
35 psig
60 psig
90 psig
120 psig
(2.4 bar)
(4.1 bar)
(6.2 bar)
(8.3 bar)
9
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1000 Series filters
1/8 and 1/4 Ports
Replacement parts
Model Description
104293 Replacement auto drain
104294 Replacement manual drain
104295 5-Micron element
104296 40-Micron element
104297 0.3-Micron element
104298 Poly bowl, manual drain
104299 Poly bowl, auto drain
104300 Metal bowl, manual drain
104301 Metal bowl, auto drain
104468 Filter bowl service kit (O-ring)
104459 Coalescing filter bowl, manual drain
104460 Coalescing filter bowl, auto drain
Accessories See page 65 for details
Model Description
104390-1 1/8 NPT lockout valve
104390-2 1/4 NPT lockout valve
104394 Modular clamp
104474-1 1/8 NPT pipe adapter
104474-2 1/4 NPT pipe adapter
104477-1 1/8 Check valve
104477-2 1/4 Check valve
104399 T-type wall mount
104403 L-type wall mount
104407 C-type wall mount
104411-1-1 1/8 x 1/8 Manifold block
104411-2-2 1/4 x 1/4 Manifold block
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Filter element
3 0.3-Micron coalescing
4 5 micron
Thread type
1 1/8 NPT
2 1/4 NPT
A 1/8 BSP
B 1/4 BSP
Drain option
0 Manual
1 Automatic
Bowl option
0 Polycarbonate
w/ guard
2 Metal
Port size Filter Bowl cap Element Model
NPT type (oz) (microns)
manual drain • metal bowl
1/8 Coalescing 0.3 0.3 F35111-320
1/8 Standard 0.4 5 F35111-420
1/4 Coalescing 0.3 0.3 F35121-320
1/4 Standard 0.4 5 F35121-420
manual drain • polycarbONATE bowl w/ guard
1/8 Coalescing 0.3 0.3 F35111-300
1/8 Standard 0.5 5 F35111-400
1/4 Coalescing 0.3 0.3 F35121-300
1/4 Standard 0.5 5 F35121-400
Auto drain • metal bowl
1/8 Coalescing 0.5 0.3 F35111-321
1/8 Standard 0.7 5 F35111-421
1/4 Coalescing 0.5 0.3 F35121-321
1/4 Standard 0.7 5 F35121-421
auto drain • polycarbONATE bowl w/ guard
1/8 Coalescing 0.5 0.3 F35111-301
1/8 Standard 0.7 5 F35111-401
1/4 Coalescing 0.5 0.3 F35121-301
1/4 Standard 0.7 5 F35121-401
Port Base
size model
1/8 - F351 1 1- X X X
1/4 - F351 2 1- X X X
See page 77 for additional flow charts
1000Series
1000Series
Popular configurations
Technical data
Polycarbonate bowl Polycarbonate
Polycarbonate bowl guard Nylon
Metal bowl Aluminum
Filter body Aluminum
Manual drain Brass + nitrile
Auto drain Acetal
Standard filter Polyethylene
Coalescing filter Hepa paper + felt
Seals Nitrile
Filter baffle Acetal
Polycarbonate bowl Metal bowl
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl cap — manual drain (oz) 0.5 0.4
Bowl cap — auto drain (oz) 0.7 0.7
Bowl cap — coal manual drain 0.3
Bowl cap — coal auto drain 0.5
*Flow capacity — 1/8 port 38 scfm
*Flow capacity — 1/4 port 49 scfm
*Inlet pressure 90 psi (6.2 bar) with 10 psi drop (0.7 bar)
1.811
(46.0)
.905
(23.0)
.776
(19.7)
“C”
Clearance
for
maintenance
1/8 NPT (F35111-XXX)
1/4 NPT (F35121-XXX)
1/8 BSP (F351A1-XXX)
1/4 BSP (F351B1-XXX)
1.575
(40.0)
“A”
“B”
1.811
(46.0)
.905
(23.0)
.776
(19.7)
“C”
Clearance
for
maintenance
1/8 NPT (F35111-XXX)
1/4 NPT (F35121-XXX)
1/8 BSP (F351A1-XXX)
1/4 BSP (F351B1-XXX)
1.575
(40.0)
“A”
“B”
1.811
(46.0)
.905
(23.0)
.776
(19.7)
“C”
Clearance
for
maintenance
1/8 NPT (F35111-XXX)
1/4 NPT (F35121-XXX)
1/8 BSP (F351A1-XXX)
1/4 BSP (F351B1-XXX)
1.575
(40.0)
“A”
“B”
1.811
(46.0)
.905
(23.0)
.776
(19.7)
“C”
Clearance
for
maintenance
1/8 NPT (F35111-XXX)
1/4 NPT (F35121-XXX)
1/8 BSP (F351A1-XXX)
1/4 BSP (F351B1-XXX)
1.575
(40.0)
“A”
“B”
MODELS A (MM) B (MM) C (MM) BOWL OPTION DRAIN OPTION
F351X1-XX0 4.303 (109.3) 3.528 (89.6) 5.102 (129.6) N/A MANUAL
F351X1-X01 5.016 (127.4) 4.240 (107.7) 5.815 (147.7) POLYCARBONATE W/ GUARD AUTOMATIC
F351X1-X21 4.992 (126.8) 4.217 (107.1) 5.791 (147.1) METAL AUTOMATIC
6. 10
Web site: fluids.ingersollrand.com
Port Base
size model
1/8 - R371 1 1 - X X X
1/4 - R371 2 1 - X X X
11
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1000 Series regulators
1/8 and 1/4 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-mount gauge
Thread type
1 1/8 NPT
2 1/4 NPT
A 1/8 BSP
B 1/4 BSP
Control option
0 Standard knob
Relieving option
0 Relieving
2 Non-relieving
Port size Pressure range Gauge Model
NPT psi
relieving • Standard knob control
1/8 0 – 30 No gauge R37111-400
1/8 0 – 60 No gauge R37111-200
1/8 0 – 140 No gauge R37111-100
1/8 0 – 140 Flush-mount gauge R37111-600
1/4 0 – 30 No gauge R37121-400
1/4 0 – 60 No gauge R37121-200
1/4 0 – 140 No gauge R37121-100
1/4 0 – 140 Flush-mount gauge R37121-600
non-relieving • Standard knob control
1/8 0 – 30 No gauge R37111-420
1/8 0 – 60 No gauge R37111-220
1/8 0 – 140 No gauge R37111-120
1/8 0 – 140 Flush-mount gauge R37111-620
1/4 0 – 30 No gauge R37121-420
1/4 0 – 60 No gauge R37121-220
1/4 0 – 140 No gauge R37121-120
1/4 0 – 140 Flush-mount gauge R37121-620
1/4 Pressure drop test
1/4 1000 SERIES REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50 60 70 80 90 100
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 5 10 15 20 25 30 35 40 45
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig 45 psig
60 psig
75 psig
90 psig
Inlet Pressure - 100 psig (6.9 bar)
(4.1 bar)
(2.1 bar)
(5.2 bar)
(3.1 bar)
(6.2 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104302 Regulator service kit (relieving)
104303 Regulator service kit (non-relieving)
104304 Tamper kit
104305 0 – 30 psi Spring
104306 0 – 60 psi Spring
104307 0 – 140 psi Spring
104310 0 – 140 psi Gauge flush mount
Accessories See page 65 for details
Model Description
104390-1 1/8 NPT lockout valve
104390-2 1/4 NPT lockout valve
104394 Modular clamp
104474-1 1/8 NPT pipe adapter
104474-2 1/4 NPT pipe adapter
104477-1 1/8 Check valve
104477-2 1/4 Check valve
104399 T-type wall mount
104403 L-type wall mount
104407 C-type wall mount
104411-1-1 1/8 x 1/8 Manifold block
104411-2-2 1/4 x 1/4 Manifold block
104416 Panel nut
104467 Gauge port block
1000Series
1000Series
Technical data
Diaphragm Nitrile + acetal
Regulator body Aluminum
Regulator valve Brass + nitrile
Regulator springs Steel
Gauge cover Nylon + polycarbonate
Regulator knob Acetal
O-rings Nitrile
Max inlet pressure (psi) 250
Temperature range (F) 23 – 140
Spring range options (psi)
0 – 30
0 – 60
0 – 140
Gauge port 1/8
Flow capacity — 1/8 port* 45 scfm
Flow capacity — 1/4 port* 59 scfm
Popular configurations
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
1/8 NPT (R37111-XXX)
1/4 NPT (R39121-XXX)
1/8 BSP (R371A1-XXX)
1/4 BSP (R371B1-XXX)
.140 (3.5) Maximum panel thickness
M28 X 1.0 Thread
1/8 NPT gauge port
(No gauge option)
2.913
(74.0)
1.457
(37.0)
.933
(23.7)
1.114
(28.3)
Ø 1.038
(26.4)
2.630
(66.8)
3.563
(90.5)
1.575
(40.0)
7. 12
Web site: fluids.ingersollrand.com
1/8 NPT (L36111-XXX)
1/4 NPT (L36121-XXX)
1/8 BSP (L361A1-XXX)
1/4 BSP (L361B1-XXX)
.905
(23.0)
1.811
(46.0)
4.980
(126.5)
Clearance
for
maintenance
5.043
(128.1)
1.638
(41.6)
1.575
(40.0)
3.406
(86.5)
1/8 NPT (L36111-XXX)
1/4 NPT (L36121-XXX)
1/8 BSP (L361A1-XXX)
1/4 BSP (L361B1-XXX)
.905
(23.0)
1.811
(46.0)
4.980
(126.5)
Clearance
for
maintenance
5.043
(128.1)
1.638
(41.6)
1.575
(40.0)
3.406
(86.5)
1/8 NPT (L36111-XXX)
1/4 NPT (L36121-XXX)
1/8 BSP (L361A1-XXX)
1/4 BSP (L361B1-XXX)
.905
(23.0)
1.811
(46.0)
4.980
5.043
(128.1)
1.638
(41.6)
1.575
(40.0)
3.406
(86.5)
Port Base
size model
1/8 - L361 1 1 - X X X
1/4 - L361 2 1 - X X X
13
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1000 Series lubricators
1/8 and 1/4 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Adjustment option
1 Standard
Thread type
1 1/8 NPT
2 1/4 NPT
A 1/8 BSP
B 1/4 BSP
Fill option
0 Standard
Bowl option
0 Polycarbonate w/ guard
2 Metal
Port size Adjustment Bowl cap Fill Model
NPT option (oz) option
metal bowl
1/8 Standard 0.7 Standard L36111-120
1/4 Standard 0.7 Standard L36121-120
polycarbONATE bowl w/ guard
1/8 Standard 0.6 Standard L36111-100
1/4 Standard 0.6 Standard L36121-100
1/4 Pressure drop test
1/4 1000 SERIES LUBRICATOR
0
1
2
3
4
5
6
7
0 10 20 30 40 50 60 70
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0 5 10 15 20 25 30
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure
35 psig
60 psig
90 psig
120 psig
(2.4 bar)
(4.1 bar) (8.3 bar)
(6.2 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104311 Polycarbonate bowl w/ guard
104312 Metal bowl
104313 Lubricator bowl service kit
104314 Sight dome repair kit
Accessories See page 65 for details
Model Description
104390-1 1/8 NPT lockout valve
104390-2 1/4 NPT lockout valve
104394 Modular clamp
104474-1 1/8 NPT pipe adapter
104474-2 1/4 NPT pipe adapter
104477-1 1/8 Check valve
104477-2 1/4 Check valve
104399 T-type wall mount
104403 L-type wall mount
104407 C-type wall mount
104411-1-1 1/8 x 1/8 Manifold block
104411-2-2 1/4 x 1/4 Manifold block
1000Series
1000Series
Technical data
Lubricator body Aluminum
Lubricator sight dome Nylon
Lubricator inlet tube Urethane
Seals Nitrile
Polycarbonate bowl Metal bowl
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl capacity (oz) 0.6 0.7
Flow capacity — 1/8 Port* 32 scfm
Flow capacity — 1/4 Port* 57 scfm
Popular configurations*Inlet pressure 90 psi (6.2 bar) with 7 psi drop (0.5 bar)
8. 14
Web site: fluids.ingersollrand.com
M28 X 1.0 Thread
.140 (3.5) Maximum panel thickness1/8 NPT gauge port
(No gauge option)
1/8 NPT (P3911X-XXX)
1/4 NPT (P3912X-XXX)
1/8 BSP (P391AX-XXX)
1/4 BSP (P391BX-XXX)
1.457
(37.0)
1.130
(28.7)
2.913
(74.0)
2.650
(67.3)
1.575
(40.0)
Ø 1.039
(26.4)
“C”
Clearance
for
maintenance
“B”
“A”
15
1000 Series piggyback filters / regulators
1/8 and 1/4 Ports
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Port Base
size model
1/8 - P391 1 X - X X X
1/4 - P391 2 X - X X X
Filter element
4 5-Micron
Thread type
1 1/8 NPT
2 1/4 NPT
A 1/8 BSP
B 1/4 BSP
Control / drain
option
0 Standard knob /
manual
4 Standard knob /
automatic
Relieving bowl
option
0 Relieving / poly
w/ guard
2 Relieving / metal
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-
mount gauge
Port size Drain Spring range w/ Gauge Model
NPT psi
5 MICRON • POLYCARBONATE BOWL • RELIEVING
1/8 Manual 0 – 140 No P39114-100
1/8 Manual 0 – 60 No P39114-200
1/8 Manual 0 – 30 No P39114-400
1/8 Manual 0 – 140 Yes P39114-600
1/8 Auto 0 – 60 No P39114-204
1/4 Manual 0 – 140 No P39124-100
1/4 Manual 0 – 60 No P39124-200
1/4 Manual 0 – 30 No P39124-400
1/4 Manual 0 – 140 Yes P39124-600
1/4 Auto 0 – 140 No P39124-104
1/4 Auto 0 – 60 No P39124-204
1/4 Auto 0 – 30 No P39124-404
1/4 Auto 0 – 140 Yes P39124-604
5 MICRON • METAL bowl • relieving
1/8 Auto 0 – 60 Yes P39114-624
1/4 Manual 0 – 140 No P39124-120
1/4 Manual 0 – 140 Yes P39124-620
1/4 Auto 0 – 140 No P39124-124
1/4 Pressure drop test
1/4 1000 SERIES FILTER/REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50 60
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 5 10 15 20 25
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
45 psig
60 psig
75 psig
90 psig
Inlet Pressure - 100 psig (6.9 bar)
(2.1 bar)
(3.1 bar)
(4.1 bar)
(5.2 bar)
(6.2 bar)
See page 77 for additional flow charts
1000Series
1000Series
Technical data
Polycarbonate bowl Metal bowl
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi)
0 – 30
0 – 60
0 – 140
Bowl cap — manual drain (oz) 0.5 0.4
Bowl cap — auto drain (oz) 0.7 0.7
Gauge port 1/8
Flow capacity — 1/8 port* 43 scfm
Flow capacity — 1/4 port* 47 scfm
Popular configurations
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Replacement parts
Model Description
104293 Replacement auto drain
104294 Replacement manual drain
104295 5-Micron element
104296 40-Micron element
104298 Poly bowl, manual drain
104299 Poly bowl, auto drain
104300 Metal bowl, manual drain
104301 Metal bowl, auto drain
104468 Filter bowl service kit (O-ring)
104302 Regulator service kit (relieving)
104303 Regulator service kit (non-relieving)
104304 Tamper kit
104305 0 – 30 psi Spring
104306 0 – 60 psi Spring
104307 0 – 140 psi Spring
104310 0 – 140 psi Gauge flush mount
MODELS A (MM) B (MM) C (MM) DRAIN OPTION
P391XX-XX0 6.197 (157.4) 3.547 (90.1) 5.122 (130.1) MANUAL
P391XX-XX4 6.890 (175.0) 4.240 (107.7) 5.815 (147.7) AUTOMATIC
9. 16
Web site: fluids.ingersollrand.com
3.150
(80.0)
4.724
(120.0)
3.150
(80.0)
1.638
(41.6)
1.693
(43.0)
2.642
(67.1)
3.528
(89.6)
.236
(6.0)
3.150
(80.0)
1.378
(35.0)
Ø .197
(5.0)
1.339
(34.0)
1.811
(46.0)
3.622
(92.0)
3.150
(80.0)
4.724
(120.0)
3.150
(80.0)
1.638
(41.6)
1.693
(43.0)
2.642
(67.1)
3.528
(89.6)
17
1000 Series combinations
1/8 and 1/4 Ports
F + R + L Combinations
F/R + L Combinations
1/4 Pressure drop test
1/4 1000 SERIES F-R-L COMBO
0
10
20
30
40
50
60
70
80
90
100
0 10 20 30 40 50 60 70
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 5 10 15 20 25 30
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig 45 psig
60 psig
75 psig
90 psig
Inlet Pressure - 100 psig (6.9 bar)
(2.1 bar)
(5.2 bar)
(3.1 bar)
(4.1 bar)
(6.2 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104293 Replacement auto drain
104294 Replacement manual drain
104295 5-Micron element
104296 40-Micron element
104297 0.3-Micron element
104298 Poly bowl, manual drain
104299 Poly bowl, auto drain
104300 Metal bowl, manual drain
104301 Metal bowl, auto drain
104468 Filter bowl service kit (O-ring)
104459 Coalescing filter bowl, manual drain
104460 Coalescing filter bowl, auto drain
104302 Regulator service kit (relieving)
104303 Regulator service kit (non-relieving)
104304 Tamper kit
104305 0 – 30 psi Spring
104306 0 – 60 psi Spring
104307 0 – 140 psi Spring
104310 0 – 140 psi Gauge flush mount
104311 Polycarbonate bowl w/ guard
104312 Metal bowl
104313 Lubricator bowl service kit
104314 Sight dome repair kit
1000Series
1000Series
Technical data
Polycarbonate
bowl
Metal bowl
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi) 0 – 140
Filter element 5 micron
Filter bowl cap — manual drain (oz) 0.5 0.4
Filter bowl cap — auto drain (oz) 0.7 0.7
Lubricator bowl capacity (oz) 0.6 0.7
Gauge port 1/8
Flow capacity — 1/8 - 2 unit* 36 scfm
Flow capacity — 1/4 - 2 unit* 44 scfm
Flow capacity — 1/8 - 3 unit* 34 scfm
Flow capacity — 1/4 - 3 unit* 46 scfm
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Components Model
NPT Filter Regulator Lubricator
manual drain • metal bowl • relieving • W/ gauge
1/8 F35111-420 R37111-600 L36111-120 C38111-820
1/4 F35121-420 R37121-600 L36121-120 C38121-820
manual drain • polycarbonate bowl • relieving • W/ gauge
1/8 F35111-400 R37111-600 L36111-100 C38111-800
1/4 F35121-400 R37121-600 L36121-100 C38121-800
Auto drain • metal bowl • relieving • W/ gauge
1/4 F35121-421 R37121-600 L36121-120 C38121-821
Auto drain • polycarbonate bowl • relieving • W/ gauge
1/4 F35121-401 R37121-600 L36121-100 C38121-801
Port size Components Model
NPT Filter-Regulator Lubricator
manual drain • metal bowl • relieving • W/ gauge
1/8 P39114-620 L36111-120 C38111-620
1/4 P39124-620 L36121-120 C38121-620
manual drain • polycarbonate bowl • relieving • W/ gauge
1/8 P39114-600 L36111-100 C38111-600
1/4 P39124-600 L36121-100 C38121-600
Auto drain • metal bowl • relieving • W/ gauge
1/4 P39124-624 L36121-120 C38121-621
Auto drain • polycarbonate bowl • relieving • W/ gauge
1/4 P39124-604 L36121-100 C38121-601
Note: Other combinations may be assembled by purchasing the individual components
separately. Modular connector kits are required to connect the individual units together.
10. 18
Web site: fluids.ingersollrand.com
1/4 NPT (F3522X-XXX)
3/8 NPT (F3523X-XXX)
1/4 BSP (F352BX-XXX)
3/8 BSP (F352CX-XXX)
1.101
(28.0)
.965
(24.5)
2.244
(57.0)
2.205
(56.0)
“C”
Clearance
for
maintenance
“B”
“A”
1/4 NPT (F3522X-XXX)
3/8 NPT (F3523X-XXX)
1/4 BSP (F352BX-XXX)
3/8 BSP (F352CX-XXX)
1.101
(28.0)
.965
(24.5)
2.244
(57.0)
2.205
(56.0)
“C”
Clearance
for
maintenance
“B”
“A”
Technical data
Polycarbonate bowl Polycarbonate
Polycarbonate bowl guard Nylon
Metal bowl Aluminum
Metal bowl sight glass Nylon
Filter body Aluminum
Manual drain Brass + nitrile
Auto drain Acetal
Standard filter Polyethylene
Coalescing filter Hepa paper + felt
Seals Nitrile
Filter baffle Acetal
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl cap — manual drain (oz) 1.3 1.3
Bowl cap — auto drain (oz) 1.0 1.0
Bowl cap — coal manual drain 1.2
Bowl cap — coal auto drain 1.0
Flow capacity — 1/4 port* 73 scfm
Flow capacity — 3/8 port* 107 scfm
19
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1500 Series filters
1/4 and 3/8 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Filter element
3 0.3-Micron coalescing
4 5 micron
Thread type
2 1/4 NPT
3 3/8 NPT
B 1/4 BSP
C 3/8 BSP
Drain option
0 Manual
1 Automatic
Bowl option
0 Polycarbonate w/
guard
1 Metal w/ sight glass
2 Metal
Port Base
size model
1/4 - F352 2 X - X X X
3/8 - F352 3 X - X X X
3/8 Pressure drop test
3/8 1500 SERIES FILTER
0
1
2
3
4
5
6
7
8
9
10
0 20 40 60 80 100 120
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0.5
0.6
0 10 20 30 40 50
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure
35 psig
(2.4 bar)
60 psig
(4.1 bar)
90 psig
(6.2 bar) 120 psig
(8.3 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104420 Replacement auto drain
104421 Replacement manual drain
104422 5-Micron element
104423 40-Micron element
104424 0.3-Micron element
104425 Poly bowl, manual drain
104426 Poly bowl, auto drain
104427 Metal bowl w/ sight glass, manual drain
104428 Metal bowl w/ sight glass, auto drain
104481 Metal bowl, manual drain
104482 Metal bowl, auto drain
104429 Filter bowl service kit (O-ring)
Accessories See page 65 for details
Model Description
104391-2 1/4 NPT lock-out valve
104391-3 3/8 NPT lock-out valve
104395 Modular clamp
104475-2 1/4 NPT pipe adapter
104475-3 3/8 NPT pipe adapter
104478-2 1/4 Check valve
104478-3 3/8 Check valve
104400 T-type wall mount
104404 L-type wall mount
104408 C-type wall mount
104412-3-1 3/8 x 1/8 Manifold block
104412-3-2 3/8 x 1/4 Manifold block
1500Series
1500Series
*Inlet pressure 90 psi (6.2 bar) with 10 psi drop (0.7 bar)
Port size Filter Bowl cap Element Model
NPT type (oz) (microns)
manual drain • polycarbONATE bowl w/ guard
1/4 Coalescing 1.2 0.3 F35221-300
1/4 Standard 1.3 5 F35221-400
3/8 Coalescing 1.2 0.3 F35231-300
3/8 Standard 1.3 5 F35231-400
manual drain • metal bowl
1/4 Coalescing 1.2 0.3 F35221-320
1/4 Standard 1.3 5 F35221-420
3/8 Coalescing 1.2 0.3 F35231-320
3/8 Standard 1.3 5 F35231-420
manual drain • metal bowl w/ sight glass
1/4 Coalescing 1.2 0.3 F35221-310
1/4 Standard 1.3 5 F35221-410
3/8 Coalescing 1.2 0.3 F35231-310
3/8 Standard 1.3 5 F35231-410
auto drain • polycarbONATE bowl w/ guard
1/4 Coalescing 1.0 0.3 F35221-301
1/4 Standard 1.0 5 F35221-401
3/8 Coalescing 1.0 0.3 F35231-301
3/8 Standard 1.0 5 F35231-401
Auto drain • metal bowl w/ sight glass
1/4 Coalescing 1.0 0.3 F35221-311
1/4 Standard 1.0 5 F35221-411
3/8 Coalescing 1.0 0.3 F35231-311
3/8 Standard 1.0 5 F35231-411
Popular configurations
MODEL A (MM) B (MM) C (MM) BOWL DRAIN
F352XX-X00 6.161 (156.5) 5.197 (132.0) 7.197 (182.8) POLYCARBONATE MANUAL
F352XX-X01 7.028 (178.5) 6.063 (154.0) 8.063 (204.8) POLYCARBONATE AUTOMATIC
F352XX-X10 6.161 (156.5) 5.197 (132.0) 7.072 (179.6) METAL W/ SIGHT GLASS MANUAL
F352XX-X11 7.028 (178.5) 6.063 (154.0) 7.938 (201.6) METAL W/ SIGHT GLASS AUTOMATIC
F352XX-X20 6.161 (156.5) 5.197 (132.0) 7.072 (179.6) METAL MANUAL
F352XX-X21 7.028 (178.5) 6.063 (154.0) 7.938 (201.6) METAL AUTOMATIC
11. 20
Web site: fluids.ingersollrand.com
1/4 NPT (R37221-XXX)
3/8 NPT (R37231-XXX)
1/4 BSP (R372B1-XXX)
3/8 BSP (R372C1-XXX)
2.705
(68.7)
2.205
(56.0)
1/8 NPT gauge port
(No gauge options)
M36 X 1.5 Thread
.197 (5.0) Maximum panel thickness
3.512
(89.2)
1.319
(33.5)
1.260
(32.0)
1.352
(34.3)
4.772
(121.2)
Ø 1.315
(33.4)
1/4 NPT (R37221-XXX)
3/8 NPT (R37231-XXX)
1/4 BSP (R372B1-XXX)
3/8 BSP (R372C1-XXX)
2.705
(68.7)
2.205
(56.0)
1/8 NPT gauge port
(No gauge options)
M36 X 1.5 Thread
.197 (5.0) Maximum panel thickness
3.512
(89.2)
1.319
(33.5)
1.260
(32.0)
1.352
(34.3)
4.772
(121.2)
Ø 1.315
(33.4)
Technical data
Diaphragm Nitrile + nylon
Regulator body Aluminum
Regulator valve Nitrile + nylon
Regulator springs Steel
Gauge cover Nylon + polycarbonate
Regulator knob Acetal
O-rings Nitrile
Max inlet pressure (psi) 250
Temperature range (F) 23 – 140
Spring range options (psi)
0 – 30
0 – 60
0 – 140
Gauge port 1/8
*Flow capacity — 1/4 port 86 scfm
*Flow capacity — 3/8 port 113 scfm
Port Base
size model
1/4 - R372 2 1 - X X X
3/8 - R372 3 1 - X X X
21
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1500 Series regulators
1/4 and 3/8 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-mount gauge
Thread type
2 1/4 NPT
3 3/8 NPT
B 1/4 BSP
C 3/8 BSP
Control option
0 Standard knob
Relieving option
0 Relieving
2 Non-relieving
Port size Pressure range Gauge Model
NPT psi
relieving • Standard knob control
1/4 0 – 30 No gauge R37221-400
1/4 0 – 60 No gauge R37221-200
1/4 0 – 140 No gauge R37221-100
1/4 0 – 140 Flush-mount gauge R37221-600
3/8 0 – 30 No gauge R37231-400
3/8 0 – 60 No gauge R37231-200
3/8 0 – 140 No gauge R37231-100
3/8 0 – 140 Flush-mount gauge R37231-600
non-relieving • Standard knob control
1/4 0 – 30 No gauge R37221-420
1/4 0 – 60 No gauge R37221-220
1/4 0 – 140 No gauge R37221-120
1/4 0 – 140 Flush-mount gauge R37221-620
3/8 0 – 30 No gauge R37231-420
3/8 0 – 60 No gauge R37231-220
3/8 0 – 140 No gauge R37231-120
3/8 0 – 140 Flush-mount gauge R37231-620
3/8 Pressure drop test
3/8 1500 SERIES REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 20 40 60 80 100 120 140 160 180
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 10 20 30 40 50 60 70 80
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104430 Regulator service kit (relieving)
104431 Regulator service kit (non-relieving)
104432 Tamper kit
104433 0 – 30 psi Spring
104434 0 – 60 psi Spring
104435 0 – 140 psi Spring
104310 0 – 140 psi Gauge flush mount
Accessories See page 65 for details
Model Description
104391-2 1/4 NPT lockout valve
104391-3 3/8 NPT lockout valve
104395 Modular clamp
104475-2 1/4 NPT pipe adapter
104475-3 3/8 NPT pipe adapter
104478-2 1/4 Check valve
104478-3 3/8 Check valve
104400 T-type wall mount
104404 L-type wall mount
104408 C-type wall mount
104412-3-1 3/8 x 1/8 Manifold block
104412-3-2 3/8 x 1/4 Manifold block
104417 Panel nut
104467 Gauge port block
1500Series
1500Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Popular configurations
12. 22
Web site: fluids.ingersollrand.com
1/4 NPT (L36221-XXX)
3/8 NPT (L36231-XXX)
1/4 BSP (L362B1-XXX)
3/8 BSP (L362C1-XXX)
1.101
(28.0)
1.776
(45.1)
4.213
(107.0)
7.713
(195.9)
5.988
(152.1)
2.205
(56.0)
2.244
(57.0)
Clearance
for
maintenance
1/4 NPT (L36221-XXX)
3/8 NPT (L36231-XXX)
1/4 BSP (L362B1-XXX)
3/8 BSP (L362C1-XXX)
1.101
(28.0)
1.776
(45.1)
4.213
(107.0)
5.988
(152.1)
2.205
(56.0)
2.244
(57.0)
Technical data
Lubricator body Aluminum
Lubricator sight dome Nylon
Lubricator inlet tube Urethane
Seals Nitrile
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl capacity (oz) 1.9 1.5
Flow capacity — 1/4 port* 51 scfm
Flow capacity — 3/8 port* 105 scfm
Port Base
size model
1/4 - L362 2 1 - X X X
3/8 - L362 3 1 - X X X
23
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
1500 Series lubricators
1/4 and 3/8 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Adjustment option
1 Standard
Thread type
2 1/4 NPT
3 3/8 NPT
B 1/4 BSP
C 3/8 BSP
Fill option
0 Standard
Bowl option
0 Polycarbonate w/ guard
1 Metal w/ sight glass
2 Metal
Port size Adjustment Bowl cap Fill Model
NPT option (oz) option
metal bowl
1/4 Standard 1.5 Standard L36221-120
3/8 Standard 1.5 Standard L36231-120
metal bowl w/ sight glass
1/4 Standard 1.5 Standard L36221-110
3/8 Standard 1.5 Standard L36231-110
polycarbONATE bowl w/ guard
1/4 Standard 1.9 Standard L36221-100
3/8 Standard 1.9 Standard L36231-100
3/8 Pressure drop test
3/8 1500 SERIES LUBRICATOR
0
1
2
3
4
5
6
7
0 20 40 60 80 100 120 140
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0 10 20 30 40 50 60
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure
35 psig
(2.4 bar)
60 psig
(4.1 bar)
90 psig
(6.2 bar)
120 psig
(8.3 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104439 Polycarbonate bowl w/ guard
104440 Metal bowl w/ sight glass
104483 Metal bowl
104441 Lubricator bowl service kit
104442 Sight dome repair kit
Accessories See page 65 for details
Model Description
104391-2 1/4 NPT lockout valve
104391-3 3/8 NPT lockout valve
104395 Modular clamp
104475-2 1/4 NPT pipe adapter
104475-3 3/8 NPT pipe adapter
104478-2 1/4 Check valve
104478-3 3/8 Check valve
104400 T-type wall mount
104404 L-type wall mount
104408 C-type wall mount
104412-3-1 3/8 x 1/8 Manifold block
104412-3-2 3/8 x 1/4 Manifold block
1500Series
1500Series
*Inlet pressure 90 psi (6.2 bar) with 7 psi drop (0.5 bar) Popular configurations
13. 24
Web site: fluids.ingersollrand.com
1/4 NPT (P3922X-XXX)
3/8 NPT (P3923X-XXX)
1/4 BSP (P392BX-XXX)
3/8 BSP (P392CX-XXX)
.197 (5.0) Maximum panel thickness
1/8 NPT gauge port
(No gauge option)
M36 x 1.5 Thread
1.656
(42.0)
3.311
(84.1)
2.205
(56.0)
3.367
(85.5)
1.319
(33.5)
Ø 1.315
(33.4)
“C”
Clearance
for
maintenance
“B”
“A”
1/4 NPT (P3922X-XXX)
3/8 NPT (P3923X-XXX)
1/4 BSP (P392BX-XXX)
3/8 BSP (P392CX-XXX)
.197 (5.0) Maximum panel thickness
uge port
ption)
M36 x 1.5 Thread
1.656
(42.0)
3.311
(84.1)
2.205
(56.0)
3.367
(85.5)
1.319
(33.5)
Ø 1.315
(33.4)
“B”
“A”
Technical data
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi)
0 – 30
0 – 60
0 – 140
Bowl cap — manual drain (oz) 1.3 1.3
Bowl cap — auto drain (oz) 1.0 1.0
Bowl cap — coal manual drain 1.2
Bowl cap — coal auto drain 1.0
Gauge port 1/8
Flow capacity — 1/4 port* 72 scfm
Flow capacity — 3/8 port* 90 scfm
25
1500 Series piggyback filters / regulators
1/4 and 3/8 Ports
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Port Base
size model
1/4 - P392 2 X - X X X
3/8 - P392 3 X - X X X
Filter element
3 0.3-Micron
coalescing
4 5-Micron
Thread type
2 1/4 NPT
3 3/8 NPT
B 1/4 BSP
C 3/8 BSP
Control / drain
option
0 Standard knob /
manual
4 Standard knob /
automatic
Relieving bowl
option
0 Relieving / poly
w/ guard
1 Relieving / metal
w/ sight glass
2 Relieving / metal
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140
w/ flush-mount gauge
3/8 Pressure drop test
3/8 1500 SERIES FILTER/REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 20 40 60 80 100 120 140
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 10 20 30 40 50 60
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar) 75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104420 Replacement auto drain
104421 Replacement manual drain
104424 0.3-Micron element
104422 5-Micron element
104423 40-Micron element
104425 Poly bowl, manual drain
104426 Poly bowl, auto drain
104427 Metal bowl w/ sight glass, manual drain
104428 Metal bowl w/ sight glass, auto drain
104481 Metal bowl, manual drain
104482 Metal bowl, auto drain
104429 Filter bowl service kit (O-ring)
104430 Regulator service kit (relieving)
104431 Regulator service kit (non-relieving)
104432 Tamper kit
104433 0 – 30 psi Spring
104434 0 – 60 psi Spring
104435 0 – 140 psi Spring
104310 0 – 140 psi Gauge flush mount
1500Series
1500Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Drain Spring range w/ Gauge Model
NPT psi
5 MICRON • PolYCARBONATE BOWL • RELIEVING
1/4 Manual 0 – 140 No P39224-100
1/4 Manual 0 – 140 Yes P39224-600
1/4 Auto 0 – 140 No P39224-104
1/4 Auto 0 – 140 Yes P39224-604
3/8 Manual 0 – 140 No P39234-100
3/8 Manual 0 – 140 Yes P39234-600
3/8 Auto 0 – 140 No P39234-104
3/8 Auto 0 – 140 Yes P39234-604
5 MICRON • METAL BOWL W/ SIGHT GLASS • relieving
1/4 Manual 0 – 140 No P39224-110
1/4 Manual 0 – 60 No P39224-210
1/4 Manual 0 – 140 Yes P39224-610
1/4 Auto 0 – 140 No P39224-114
3/8 Manual 0 – 140 No P39234-110
3/8 Manual 0 – 140 Yes P39234-610
5 MICRON • METAL bowl • relieving
1/4 Manual 0 – 140 Yes P39224-620
Popular configurations
MODEL A (MM) B (MM) C (MM) DRAIN
P392XX-XX0 8.150 (207.0) 4.783 (121.5) 6.783 (172.3) MANUAL
P392XX-XX4 9.016 (229.0) 5.650 (143.5) 7.650 (194.3) AUTOMATIC
14. 26
Web site: fluids.ingersollrand.com
3.026
(76.8)
6.614
(168.0)
4.409
(112.0)
3.329
(84.6)
3.369
(85.6)
4.838
(122.9)
1.776
(45.1)
1.673
(42.5)
1.201
(30.5)
2.756
(70.0)
.242
(6.2)
3.241
(82.3)
2.165
(55.0)
2.244
(57.0)
Ø .276
(7.0)
3.026
(76.8)
6.614
(168.0)
4.409
(112.0)
3.329
(84.6)
3.369
(85.6)
4.838
(122.9)
1.776
(45.1)
1.673
(42.5)
1.201
(30.5)
2.756
(70.0)
.242
(6.2)
3.241
(82.3)
2.165
(55.0)
2.244
(57.0)
Ø .276
(7.0)
3.026
(76.8)
6.614
(168.0)
4.409
(112.0)
3.329
(84.6)
3.369
(85.6)
4.838
(122.9)
1.776
(45.1)
3
5)
3.026
(76.8)
6.614
(168.0)
4.409
(112.0)
3.329
(84.6)
3.369
(85.6)
4.838
(122.9)
1.776
(45.1)
1.673
(42.5)
Technical data
Polycarbonate
bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi) 0 – 140
Filter element 5 micron
Filter bowl cap — manual drain (oz) 1.3 1.3
Filter bowl cap — auto drain (oz) 1.0 1.0
Lubricator bowl capacity (oz) 1.9 1.5
Gauge port 1/8
Flow capacity — 1/4 - 2 unit* 58 scfm
Flow capacity — 3/8 - 2 unit* 71 scfm
Flow capacity — 1/4 - 3 unit* 61 scfm
Flow capacity — 3/8 - 3 unit* 85 scfm
27
1500 Series combinations
1/4 and 3/8 Ports
3/8 Pressure drop test
3/8 1500 SERIES F-R-L COMBO
0
10
20
30
40
50
60
70
80
90
100
0 20 40 60 80 100 120 140
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 10 20 30 40 50 60
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104420 Replacement auto drain
104421 Replacement manual drain
104422 5-Micron element
104423 40-Micron element
104424 0.3-Micron element
104425 Poly bowl, manual drain
104426 Poly bowl, auto drain
104427 Metal bowl w/ sight glass, manual drain
104428 Metal bowl w/ sight glass, auto drain
104481 Metal bowl, manual drain
104482 Metal bowl, auto drain
104429 Filter bowl service kit (O-ring)
104430 Regulator service kit (relieving)
104431 Regulator service kit (non-relieving)
104432 Tamper kit
104433 0 – 30 psi Spring
104434 0 – 60 psi Spring
104435 0 – 140 psi Spring
104439 Polycarbonate bowl w/ guard
104440 Metal bowl w/ sight glass
104483 Metal bowl
104441 Lubricator bowl service kit
104442 Sight dome repair kit
104310 0 – 140 psi Gauge flush mount
1500Series
1500Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Components Model
NPT Filter Regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
1/4 F35221-410 R37221-600 L36221-110 C38221-810
3/8 F35231-410 R37231-600 L36231-110 C38231-810
manual drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
1/4 F35221-400 R37221-600 L36221-100 C38221-800
3/8 F35231-400 R37231-600 L36231-100 C38231-800
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
1/4 F35221-411 R37221-600 L36221-110 C38221-811
3/8 F35231-411 R37231-600 L36231-110 C38231-811
Auto drain • Polycarbonate Bowl w/ Guard • relieving • W/ gauge
1/4 F35221-401 R37221-600 L36221-100 C38221-801
3/8 F35231-401 R37231-600 L36231-100 C38231-801
Port size Components Model
NPT Filter-regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
1/4 P39224-610 L36221-110 C38221-610
3/8 P39234-610 L36231-110 C38231-610
manual drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
1/4 P39224-600 L36221-100 C38221-600
3/8 P39234-600 L36231-100 C38231-600
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
1/4 P39224-614 L36221-110 C38221-611
3/8 P39234-614 L36231-110 C38231-611
Auto drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
1/4 P39224-604 L36221-100 C38221-601
3/8 P39234-604 L36231-100 C38231-601
F + R + L Combinations
F/R + L Combinations
Note: Other combinations may be assembled by purchasing the individual components
separately. Modular connector kits are required to connect the individual units together.
15. 28
Web site: fluids.ingersollrand.com
2.874
(73.0)
2.677
(68.0)
1.102
(28.0)
1.437
(36.5)
“A”
3/8 NPT (F3533X-XXX)
1/2 NPT (F3534X-XXX)
3/4 NPT (F3535X-XXX)
3/8 BSP (F353CX-XXX)
1/2 BSP (F353DX-XXX)
3/4 BSP (F353EX-XXX)
“B”
“C”“D”
Clearance
for
maintenance
Technical data
Polycarbonate bowl Polycarbonate
Polycarbonate bowl guard Nylon
Metal bowl Aluminum
Metal bowl sight glass Nylon
Filter body Aluminum
Manual drain Brass + nitrile
Auto drain Acetal
Standard filter Polyethylene
Coalescing filter Hepa paper + felt
Seals Nitrile
Filter baffle Acetal
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl cap — manual drain (oz) 1.9 2.4
Bowl cap — auto drain (oz) 2.3 2.8
Flow capacity — 3/8 port* 156 scfm
Flow capacity — 1/2 port* 197 scfm
Flow capacity — 3/4 port* 216 scfm
29
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
2000 Series filters
3/8, 1/2, and 3/4 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Filter element
3 0.3-Micron
coalescing
4 5-Micron
Service indicator
1 None
2 Mechanical
(standard
w/ coalescing)
Drain option
0 Manual
1 Automatic
Bowl option
0 Polycarbonate
w/ guard
1 Metal w/ sight
glass
2 Metal
Port Base
size model
3/8 - F353 3 X - X X X
1/2 - F353 4 X - X X X
3/4 - F353 5 X - X X X
Port size Filter Element Bowl cap Service Model
NPT type (microns) (oz) indicator
Manual Drain • Polycarbonate Bowl w/ guard
3/8 Standard 5 1.9 None F35331-400
3/8 Coalescing 0.3 1.9 Mechanical F35332-300
1/2 Standard 5 1.9 None F35341-400
1/2 Coalescing 0.3 1.9 Mechanical F35342-300
3/4 Standard 5 1.9 None F35351-400
Manual Drain • Metal Bowl
3/8 Standard 5 2.4 None F35331-420
3/8 Coalescing 0.3 2.4 Mechanical F35332-320
1/2 Standard 5 2.4 None F35341-420
1/2 Coalescing 0.3 2.4 Mechanical F35342-320
Manual Drain • Metal Bowl w/ Sight Glass
3/8 Standard 5 2.4 None F35331-410
3/8 Coalescing 0.3 2.4 Mechanical F35332-310
1/2 Standard 5 2.4 None F35341-410
1/2 Coalescing 0.3 2.4 Mechanical F35342-310
3/4 Standard 5 2.4 None F35351-410
Auto Drain • Polycarbonate Bowl w/ guard
3/8 Standard 5 2.3 None F35331-401
3/8 Coalescing 0.3 2.3 Mechanical F35332-301
1/2 Standard 5 2.3 None F35341-401
1/2 Coalescing 0.3 2.3 Mechanical F35342-301
3/4 Standard 5 2.3 None F35351-401
Auto Drain • Metal Bowl w/ Sight Glass
3/8 Standard 5 2.8 None F35331-411
3/8 Coalescing 0.3 2.8 Mechanical F35332-311
1/2 Standard 5 2.8 None F35341-411
1/2 Coalescing 0.3 2.8 Mechanical F35342-311
3/4 Standard 5 2.8 None F35351-411
1/2 Pressure drop test
1/2 2000 SERIES FILTER
0
1
2
3
4
5
6
7
8
9
10
0 20 40 60 80 100 120 140 160 180 200 220
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure 35 psig
(2.4 bar)
60 psig
(4.1 bar)
90 psig
(6.2 bar)
120 psig
(8.3 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104315 Replacement auto drain
104316 Replacement manual drain
104317 5-Micron element
104318 40-Micron element
104319 0.3-Micron element
104320 Poly bowl, manual drain
104321 Poly bowl, auto drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
104324 Metal bowl, sight glass, auto drain
104325 Metal bowl, sight glass, manual drain
104326 Filter bowl service kit
Accessories See page 65 for details
Model Description
104392-3 3/8 NPT lock-out valve
104392-4 1/2 NPT lock-out valve
104396 Modular clamp
104398-3 3/8 NPT pipe adapter
104398-4 1/2 NPT pipe adapter
104479-3 3/8 Check valve
104479-4 1/2 Check valve
104401 T-type wall mount
104405 L-type wall mount
104409 C-type wall mount
104413-3-3 3/8 x 3/8 Manifold block
104413-4-3 1/2 x 3/8 Manifold block
2000Series
2000Series
*Inlet pressure 90 psi (6.2 bar) with 10 psi drop (0.7 bar)
Popular configurations
Thread type
3 3/8 NPT
4 1/2 NPT
5 3/4 NPT
C 3/8 BSP
D 1/2 BSP
E 3/4 BSP
2.874
(73.0)
2.677
(68.0)
1.102
(28.0)
1.437
(36.5)
“A”
3/8 NPT (F3533X-XXX)
1/2 NPT (F3534X-XXX)
3/4 NPT (F3535X-XXX)
3/8 BSP (F353CX-XXX)
1/2 BSP (F353DX-XXX)
3/4 BSP (F353EX-XXX)
“B”
“C”“D”
Clearance
for
maintenance
2.874
(73.0)
2.677
(68.0)
1.102
(28.0)
1.437
(36.5)
“A”
3/8 NPT (F3533X-XXX)
1/2 NPT (F3534X-XXX)
3/4 NPT (F3535X-XXX)
3/8 BSP (F353CX-XXX)
1/2 BSP (F353DX-XXX)
3/4 BSP (F353EX-XXX)
“B”
“C”“D”
Clearance
for
maintenance
MODEL A (MM) PORT SIZE
F3533X-XXX 2.756 (70.0) 3/8 NPT
F3534X-XXX 2.756 (70.0) 1/2 NPT
F3535X-XXX 2.992 (76.0) 3/4 NPT
MODEL B (MM)
SERVICE
INDICATOR
DRAIN OPTION
F353X1-XX0 7.047 (179) NONE MANUAL
F353X1-XX1 7.913 (201) NONE AUTOMATIC
F353X2-XX0 7.717 (196) MECHANICAL MANUAL
F353X2-XX1 8.583 (218) MECHANICAL AUTOMATIC
MODEL C (MM) D (MM) BOWL OPTION DRAIN OPTION
F353XX-X00 5.945 (151) 8.945 (227) POLYCARBONATE MANUAL
F353XX-X10 5.945 (151) 8.445 (215) METAL W/ SIGHT GLASS MANUAL
F353XX-X20 5.945 (151) 8.445 (215) METAL MANUAL
F353XX-X01 6.811 (173) 9.811 (249) POLYCARBONATE AUTOMATIC
F353XX-X11 6.811 (173) 9.311 (236) METAL W/ SIGHT GLASS AUTOMATIC
F353XX-X21 6.811 (173) 9.311 (236) METAL AUTOMATIC
16. 30
Web site: fluids.ingersollrand.com
Technical data
Diaphragm Nitrile + nylon
Regulator body Aluminum
Regulator valve Nitrile + nylon
Regulator springs Steel
Gauge cover Nylon + polycarbonate
Regulator knob Acetal
O-rings Nitrile
Max inlet pressure (psi) 250
Temperature range (F) 23 – 140
Spring range options (psi)
0 – 30
0 – 60
0 – 140
0 – 200
Gauge port 1/8
Flow capacity — 3/8 port* 179 scfm
Flow capacity — 1/2 port* 215 scfm
Flow capacity — 3/4 port* 210 scfm
Port Base
size model
3/8 - R373 3 1 - X X X
1/2 - R373 4 1 - X X X
3/4 - R373 5 1 - X X X
31
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
2000 Series regulators
3/8, 1/2, and 3/4 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
3 10 – 200 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-mount gauge
Thread type
3 3/8 NPT
4 1/2 NPT
5 3/4 NPT
C 3/8 BSP
D 1/2 BSP
E 3/4 BSP
Control option
0 Standard knob
Relieving option
0 Relieving
2 Non-relieving
Port size Pressure range Gauge Model
NPT psi
relieving • Standard knob control
3/8 0 – 30 No gauge R37331-400
3/8 0 – 60 No gauge R37331-200
3/8 0 – 140 No gauge R37331-100
3/8 0 – 140 Flush-mount gauge R37331-600
3/8 10 – 200 No gauge R37331-300
1/2 0 – 30 No gauge R37341-400
1/2 0 – 60 No gauge R37341-200
1/2 0 – 140 No gauge R37341-100
1/2 0 – 140 Flush-mount gauge R37341-600
1/2 10 – 200 No gauge R37341-300
3/4 0 – 30 No gauge R37351-400
3/4 0 – 60 No gauge R37351-200
3/4 0 – 140 No gauge R37351-100
3/4 0 – 140 Flush-mount gauge R37351-600
3/4 10 – 200 No gauge R37351-300
non-relieving • Standard knob control
3/8 0 – 30 No gauge R37331-420
3/8 0 – 60 No gauge R37331-220
3/8 0 – 140 No gauge R37331-120
3/8 0 – 140 Flush-mount gauge R37331-620
3/8 10 – 200 No gauge R37331-320
1/2 0 – 30 No gauge R37341-420
1/2 0 – 60 No gauge R37341-220
1/2 0 – 140 No gauge R37341-120
1/2 0 – 140 Flush-mount gauge R37341-620
1/2 10 – 200 No gauge R37341-320
3/4 0 – 140 Flush-mount gauge R37351-620
3/4 10 – 200 No gauge R37351-320
1/2 Pressure drop test
1/2 2000 SERIES REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 20 40 60 80 100 120 140
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104327 Regulator service kit (relieving)
104328 Regulator service kit (non-relieving)
104329 Tamper kit
104330 0 – 60 psi Spring
104331 0 – 140 psi Spring
104332 10 – 200 psi Spring
104334 0 – 140 psi Gauge flush mount
Accessories See page 65 for details
Model Description
104392-3 3/8 NPT lock-out valve
104392-4 1/2 NPT lock-out valve
104396 Modular clamp
104398-3 3/8 NPT pipe adapter
104398-4 1/2 NPT pipe adapter
104479-3 3/8 Check valve
104479-4 1/2 Check valve
104401 T-type wall mount
104405 L-type wall mount
104409 C-type wall mount
104413-3-3 3/8 x 3/8 Manifold block
104413-4-3 1/2 x 3/8 Manifold block
104418 Panel nut
104469 Gauge port block
104415 Pressure switch
2000Series
2000Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Popular configurations
3/8 NPT (R37331-XXX)
1/2 NPT (R37341-XXX)
3/4 NPT (R37351-XXX)
3/8 BSP (R373C1-XXX)
1/2 BSP (R373D1-XXX)
3/4 BSP (R373E1-XXX)
3.150
(80.0)
1.575
(40.0)
1.461
(37.1)
1.575
(40.0)
4.075
(103.5)
5.472
(139.0)
2.756
(70.0)
Ø 1.455
(37.0)
M42 X 1.5 Thread
.176 (4.5) Maximum panel thickness
1/8 NPT
Gauge port
(no gauge
opiton)
3/8 NPT (R37331-XXX)
1/2 NPT (R37341-XXX)
3/4 NPT (R37351-XXX)
3/8 BSP (R373C1-XXX)
1/2 BSP (R373D1-XXX)
3/4 BSP (R373E1-XXX)
3.150
(80.0)
1.575
(40.0)
1.461
(37.1)
1.575
(40.0)
4.075
(103.5)
5.472
(139.0)
2.756
(70.0)
Ø 1.455
(37.0)
M42 X 1.5 Thread
.176 (4.5) Maximum panel thickness
1/8 NPT
Gauge port
(no gauge
opiton)
3/8 NPT (R37331-XXX)
1/2 NPT (R37341-XXX)
3/4 NPT (R37351-XXX)
3/8 BSP (R373C1-XXX)
1/2 BSP (R373D1-XXX)
3/4 BSP (R373E1-XXX)
3.150
(80.0)
1.575
(40.0)
1.461
(37.1)
1.575
(40.0)
4.075
(103.5)
5.472
(139.0)
2.756
(70.0)
M42 X 1.5 Thread
.176 (4.5) Maximum panel thickness
1/8 NPT
Gauge port
(no gauge
opiton)
17. 32
Web site: fluids.ingersollrand.com
Technical data
Lubricator body Aluminum
Lubricator sight dome Nylon
Lubricator inlet tube Urethane
Seals Nitrile
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Bowl capacity (oz) 4.3 3.7
Flow capacity — 3/8 port* 85 scfm
Flow capacity — 1/2 port* 156 scfm
Flow capacity — 3/4 port* 222 scfm
33
2000 Series lubricators
3/8, 1/2, and 3/4 Ports
Port Base
size model
3/8 - L363 3 1 - X X X
1/2 - L363 4 1 - X X X
3/4 - L363 5 1 - X X X
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Adjustment option
1 Standard
Thread type
3 3/8 NPT
4 1/2 NPT
5 3/4 NPT
C 3/8 BSP
D 1/2 BSP
E 3/4 BSP
Fill option
0 Standard
Bowl option
0 Polycarbonate
1 Metal w/ sight glass
2 Metal
Port size Adjustment Bowl cap Fill Model
NPT option (oz) option
metal bowl
3/8 Standard 3.7 Standard L36331-120
1/2 Standard 3.7 Standard L36341-120
3/4 Standard 3.7 Standard L36351-120
metal bowl w/ sight glass
3/8 Standard 3.7 Standard L36331-110
1/2 Standard 3.7 Standard L36341-110
3/4 Standard 3.7 Standard L36351-110
polycarbONATE bowl w/ guard
3/8 Standard 4.3 Standard L36331-100
1/2 Standard 4.3 Standard L36341-100
3/4 Standard 4.3 Standard L36351-100
1/2 Pressure drop test
1/2 2000 SERIES LUBRICATOR
0
1
2
3
4
5
6
7
0 20 40 60 80 100 120 140 160 180 200
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0 10 20 30 40 50 60 70 80 90
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure 35 psig
(2.4 bar)
60 psig
(4.1 bar)
90 psig
(6.2 bar) 120 psig
(8.3 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104336 Polycarbonate bowl w/ guard
104337 Metal bowl
104338 Metal bowl w/ sight glass
104339 Lubricator bowl service kit
104470 Sight dome repair kit
Accessories See page 65 for details
Model Description
104392-3 3/8 NPT lockout valve
104392-4 1/2 NPT lockout valve
104396 Modular clamp
104398-3 3/8 NPT pipe adapter
104398-4 1/2 NPT pipe adapter
104479-3 3/8 Check valve
104479-4 1/2 Check valve
104401 T-type wall mount
104405 L-type wall mount
104409 C-type wall mount
104413-3-3 3/8 x 3/8 Manifold block
104413-4-3 1/2 x 3/8 Manifold block
2000Series
2000Series
*Inlet pressure 90 psi (6.2 bar) with 7 psi drop (0.5 bar)
Popular configurations
3/8 NPT (L36331-XXX)
1/2 NPT (L36341-XXX)
3/4 NPT (L36351-XXX)
3/8 BSP (L363C1-XXX)
1/2 BSP (L363D1-XXX)
3/4 BSP (L363E1-XXX)
“C”
Clearance
for
maintenance
2.874
(73.0)
1.685
(42.8)
1.437
(36.5)
2.756
(70.0)
“B”
“A”
3/8 NPT (L36331-XXX)
1/2 NPT (L36341-XXX)
3/4 NPT (L36351-XXX)
3/8 BSP (L363C1-XXX)
1/2 BSP (L363D1-XXX)
3/4 BSP (L363E1-XXX)
“C”
Clearance
for
maintenance
2.874
(73.0)
1.685
(42.8)
1.437
(36.5)
2.756
(70.0)
“B”
“A”
3/8 NPT (L36331-XXX)
1/2 NPT (L36341-XXX)
3/4 NPT (L36351-XXX)
3/8 BSP (L363C1-XXX)
1/2 BSP (L363D1-XXX)
3/4 BSP (L363E1-XXX)
“C”
Clearance
for
maintenance
2.874
(73.0)
1.685
(42.8)
1.437
(36.5)
2.756
(70.0)
“B”
“A”
MODEL A (MM) B (MM) C (MM) BOWL OPTION
L363X1-X0X 7.087 (180.0) 5.402 (137.2) 9.402 (238.8) POLYCARBONATE
L363X1-X1X 7.165 (182.0] 5.480 (139.2) 8.980 (228.1) METAL W/ SIGHT GLASS
L363X1-X2X 7.165 (182.0] 5.480 (139.2) 8.980 (228.1) METAL
18. 34
Web site: fluids.ingersollrand.com
1.575
(40.0)
1.575
(40.0)
3.150
(80.0)
3.945
(100.2)
2.756
(70.0)
Ø1.457
(37.0)
“C”
Clearance
for
maintenance
“B”
“A”
M42 X 1.5 Thread
.176 (4.5) Maximum panel thickness
3/8 NPT (P3933X-XXX)
1/2 NPT (P3934X-XXX)
3/4 NPT (P3935X-XXX)
3/8 BSP (P393CX-XXX)
1/2 BSP (P393DX-XXX)
3/4 BSP (P393EX-XXX)
1/8 NPT gauge port
(No gauge option)
1.575
(40.0)
1.575
(40.0)
3.150
(80.0)
3.945
(100.2)
2.756
(70.0)
Ø1.457
(37.0)
“C”
Clearance
for
maintenance
“B”
“A”
M42 X 1.5 Thread
.176 (4.5) Maximum panel thickness
3/8 NPT (P3933X-XXX)
1/2 NPT (P3934X-XXX)
3/4 NPT (P3935X-XXX)
3/8 BSP (P393CX-XXX)
1/2 BSP (P393DX-XXX)
3/4 BSP (P393EX-XXX)
1/8 NPT gauge port
(No gauge option)
Technical data
Polycarbonate bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi)
0 – 30
0 – 60
0 – 140
0 – 200
Bowl cap — manual drain (oz) 1.9 2.4
Bowl cap — auto drain (oz) 2.3 2.8
Gauge port 1/8
Flow capacity — 3/8 port* 132 scfm
Flow capacity — 1/2 port* 172 scfm
Flow capacity — 3/4 port* 173 scfm
Replacement parts
Model Description
104315 Replacement auto drain
104316 Replacement manual drain
104317 5-Micron element
104318 40-Micron element
104363 0.3-Micron element
104320 Poly bowl, manual drain
104321 Poly bowl, auto drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
104324 Metal bowl, sight glass, auto
104325 Metal bowl, sight glass, man.
104326 Filter bowl service kit
104327 Regulator service kit (relieving)
104328 Regulator service kit (non-relieving)
104329 Tamper kit
104330 0 – 60 psi Spring
104331 0 – 140 psi Spring
104332 10 – 200 psi Spring
104334 0 – 140 psi Gauge flush mount
35
2000 Series piggyback filters / regulators
3/8, 1/2, and 3/4 Ports
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Port Base
size model
3/8 - P393 3 X - X X X
1/2 - P393 4 X - X X X
3/4 - P393 5 X - X X X
Filter element
3 0.3-Micron
coalescing
4 5-Micron
Thread type
3 3/8 NPT
4 1/2 NPT
5 3/4 NPT
C 3/8 BSP
D 1/2 BSP
E 3/4 BSP
Control / drain
option
0 Standard knob /
manual
4 Standard knob /
automatic
Relieving bowl
option
0 Relieving / poly
w/ guard
1 Relieving / metal
w/ sight glass
2 Relieving / metal
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
3 10 – 175 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140
w/ flush-mount gauge
1/2 Pressure drop test
1/2 2000 SERIES FILTER/REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 20 40 60 80 100 120 140 160 180 200 220 240
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 10 20 30 40 50 60 70 80 90 100 110
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
2000Series
2000Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Drain Spring range w/ Gauge Model
NPT psi
5 MICRON • PolYCARBONATE BOWL • RELIEVING
3/8 Manual 0 – 140 No P39334-100
3/8 Manual 0 – 140 Yes P39334-600
3/8 Auto 0 – 140 No P39334-104
3/8 Auto 0 – 140 Yes P39334-604
1/2 Manual 0 – 140 No P39344-100
1/2 Manual 0 – 140 Yes P39344-600
1/2 Auto 0 – 140 No P39334-104
1/2 Auto 0 – 140 Yes P39334-604
3/4 Manual 0 – 140 No P39354-100
3/4 Manual 0 – 140 Yes P39354-600
5 MICRON • METAL BOWL W/ SIGHT GLASS • relieving
3/8 Manual 0 – 140 No P39334-110
3/8 Manual 0 – 140 Yes P39334-610
3/8 Auto 0 – 140 No P39334-114
3/8 Auto 0 – 140 Yes P39334-614
1/2 Manual 0 – 140 No P39344-110
1/2 Manual 0 – 140 Yes P39344-610
1/2 Auto 0 – 140 No P39344-114
1/2 Auto 0 – 140 Yes P39344-614
3/4 Manual 0 – 140 No P39354-110
3/4 Manual 0 – 140 Yes P39354-610
Popular configurations
MODEL A (MM) B (MM) C (MM) BOWL OPTION DRAIN OPTION
P393XX-X00 9.961 (253.0) 6.016 (152.8) 9.016 (229.0) POLY W/ GUARD MANUAL
P393XX-X10 10.039 (225.0] 6.094 (154.8) 8.594 (218.3) METAL W/ SIGHT GLASS MANUAL
P393XX-X20 10.039 (225.0] 6.094 (154.8) 8.594 (218.3) METAL MANUAL
P393XX-X04 10.787 (274.0] 6.843 (173.8) 9.843 (250.0) POLY W/GUARD AUTOMATIC
P393XX-X14 10.866 (276.0] 6.921 (175.8) 9.421 (239.3) METAL W/ SIGHT GLASS AUTOMATIC
P393XX-X24 10.866 (276.0] 6.921 (175.8) 9.421 (239.3) METAL AUTOMATIC
19. 36
Web site: fluids.ingersollrand.com
5.724
(145.4)
3.535
(89.8)
8.693
(220.8)
.295
(7.5)
3.150
(80.0)
3.264
(82.9)
2.673
(67.9)
3.150
(80.0)
1.252
(31.8)
1.961
(49.8)
1.685
(42.8)
5.988
(152.1)
3.945
(100.2)
Ø .335
(8.5)
5.724
(145.4)
3.535
(89.8)
8.693
(220.8)
2
8)
1.961
(49.8)
1.685
(42.8)
5.988
(152.1)
3.945
(100.2)
Technical data
Polycarbonate
bowl
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 150 250
Temperature range (F) 23 – 125 23 – 175
Spring range options (psi) 0 – 140
Filter element 5 micron
Filter bowl cap — manual drain (oz) 1.9 2.4
Filter bowl cap — auto drain (oz) 2.3 2.8
Lubricator bowl capacity (oz) 4.3 3.7
Gauge port 1/8
Flow capacity — 3/8 - 2 unit* 96 scfm
Flow capacity — 1/2 - 2 unit* 120 scfm
Flow capacity — 3/4 - 2 unit* 142 scfm
Flow capacity — 3/8 - 3 unit* 99 scfm
Flow capacity — 1/2 - 3 unit* 150 scfm
Flow capacity — 3/4 - 3 unit* 171 scfm
37
2000 Series combinations
3/8, 1/2, and 3/4 Ports
F + R + L Combinations
F/R + L Combinations
1/2 Pressure drop test
1/2 2000 SERIES F-R-L COMBO
0
10
20
30
40
50
60
70
80
90
100
0 20 40 60 80 100 120 140 160 180 200
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 10 20 30 40 50 60 70 80 90
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104315 Replacement auto drain
104316 Replacement manual drain
104317 5-Micron element
104318 40-Micron element
104319 0.3-Micron filter element
104363 0.3-Micron piggyback element
104320 Poly bowl, manual drain
104321 Poly bowl, auto drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
104324 Metal bowl, sight glass, auto
104325 Metal bowl, sight glass, man.
104326 Filter bowl service kit
104327 Regulator service kit (relieving)
104328 Regulator service kit (non-relieving)
104329 Tamper kit
104330 0 – 60 psi Spring
104331 0 – 140 psi Spring
104332 10 – 200 psi Spring
104334 0 – 140 psi Gauge flush mount
104336 Polycarbonate bowl w/ guard
104337 Metal bowl
104338 Metal bowl w/ sight glass
104339 Lubricator bowl service kit
104470 Sight dome repair kit
2000Series
2000Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Components Model
NPT Filter Regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/8 F35331-410 R37331-600 L36331-110 C38331-810
1/2 F35341-410 R37341-600 L36341-110 C38341-810
3/4 F35351-410 R37351-600 L36351-110 C38351-810
manual drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
3/8 F35331-400 R37331-600 L36331-100 C38331-800
1/2 F35341-400 R37341-600 L36341-100 C38341-800
3/4 F35351-400 R37351-600 L36351-100 C38351-800
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/8 F35331-411 R37331-600 L36331-110 C38331-811
1/2 F35341-411 R37341-600 L36341-110 C38341-811
3/4 F35351-411 R37351-600 L36351-110 C38351-811
Auto drain • Polycarbonate Bowl w/ Guard • relieving • W/ gauge
3/8 F35331-401 R37331-600 L36331-100 C38331-801
1/2 F35341-401 R37341-600 L36341-100 C38341-801
3/4 F35351-401 R37351-600 L36351-100 C38351-801
Port size Components Model
NPT Filter-regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/8 P39334-610 L36331-110 C38331-610
1/2 P39344-610 L36341-110 C38341-610
3/4 P39354-610 L36351-110 C38351-610
manual drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
3/8 P39334-600 L36331-100 C38331-600
1/2 P39344-600 L36341-100 C38341-600
3/4 P39354-600 L36351-100 C38351-600
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/8 P39334-614 L36331-110 C38331-611
1/2 P39344-614 L36341-110 C38341-611
3/4 P39354-614 L36351-110 C38351-611
Auto drain • Polycarbonate Bowl w/ guard • relieving • W/ gauge
3/8 P39334-604 L36331-100 C38331-601
1/2 P39344-604 L36341-100 C38341-601
3/4 P39354-604 L36351-100 C38351-601
Note: Other combinations may be assembled by purchasing the individual components
separately. Modular connector kits are required to connect the individual units together.
20. 38
Web site: fluids.ingersollrand.com
3.858
(98.0)
1.929
(49.0)
3.543
(90.0)
“C”
Clearance
for
maintenance
“B”
“A”
3/4 NPT (F3545X-XXX)
1 NPT (F3546X-XXX)
3/4 BSP (F354EX-XXX)
1 BSP (F354FX-XXX)
3.858
(98.0)
1.929
(49.0)
3.543
(90.0)
“C”
Clearance
for
maintenance
“B”
“A”
3/4 NPT (F3545X-XXX)
1 NPT (F3546X-XXX)
3/4 BSP (F354EX-XXX)
1 BSP (F354FX-XXX)
Technical data
Metal bowl Aluminum
Metal bowl sight glass Nylon
Filter body Aluminum
Manual drain Brass + nitrile
Auto drain Acetal
Standard filter Polyethylene
Coalescing filter Hepa paper + felt
Seals Nitrile
Filter baffle Acetal
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 250
Temperature range (F) 23 – 175
Bowl cap — manual drain (oz) 5.3
Bowl cap — auto drain (oz) 5.9
Bowl cap — coal manual drain 4.7
Bowl cap — coal auto drain 5.2
Flow capacity — 3/4 port* 288 scfm
Flow capacity — 1 port* 353 scfm
39
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
3000 Series filters
3/4 and 1 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Filter element
3 0.3-Micron
coalescing
4 5-Micron
Service indicator
1 None
2 Mechanical
(standard
w/ coalescing)
Thread type
5 3/4 NPT
6 1 NPT
E 3/4 BSP
F 1 BSP
Drain option
0 Manual
1 Automatic
Bowl option
1 Metal w/ sight
glass
2 Metal
Port Base
size model
3/4 - F354 5 X - X X X
1 - F354 6 X - X X X
Port size Filter Element Bowl cap Service Model
NPT type (microns) (oz) indicator
manual drain • metal bowl
3/4 Coalescing 0.3 4.7 Mechanical F35452-320
3/4 Standard 5 5.3 None F35451-420
3/4 Standard 5 5.3 Mechanical F35452-420
1 Coalescing 0.3 4.7 Mechanical F35462-320
1 Standard 5 5.3 None F35461-420
1 Standard 5 5.3 Mechanical F35462-420
manual drain • metal bowl w/ sight glass
3/4 Coalescing 0.3 4.7 Mechanical F35452-310
3/4 Standard 5 5.3 None F35451-410
3/4 Standard 5 5.3 Mechanical F35452-410
1 Coalescing 0.3 4.7 Mechanical F35462-310
1 Standard 5 5.3 None F35461-410
1 Standard 5 5.3 Mechanical F35462-410
Auto drain • metal bowl
3/4 Coalescing 0.3 5.2 Mechanical F35452-321
3/4 Standard 5 5.9 None F35451-421
3/4 Standard 5 5.9 Mechanical F35452-421
1 Coalescing 0.3 5.2 Mechanical F35462-321
1 Standard 5 5.9 None F35461-421
1 Standard 5 5.9 Mechanical F35462-421
Auto drain • metal bowl w/ sight glass
3/4 Coalescing 0.3 5.2 Mechanical F35452-311
3/4 Standard 5 5.9 None F35451-411
3/4 Standard 5 5.9 Mechanical F35452-411
1 Coalescing 0.3 5.2 Mechanical F35462-311
1 Standard 5 5.9 None F35461-411
1 Standard 5 5.9 Mechanical F35462-411
3/4 Pressure drop test
3/4 3000 SERIES FILTER
0
1
2
3
4
5
6
7
8
9
10
0 50 100 150 200 250 300
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure 35 psig
(2.4 bar)
60 psig)
(4.1 bar)
90 psig
(6.2 bar)
120 psig
(8.3 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104445 5-Micron element
104446 40-Micron element
104447 0.3-Micron element
104450 Metal bowl w/ sight glass, man
104451 Metal bowl w/ sight glass, auto
104452 Filter bowl service kit
104461 Coalescing filter bowl, manual drain
104462 Coalescing filter bowl, auto drain
104315 Replacement auto drain
104316 Replacement manual drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
Accessories See page 65 for details
Model Description
104393-5 3/4 NPT lockout valve
104393-6 1 NPT lockout valve
104397 Modular clamp
104476-5 3/4 NPT pipe adapter
104476-6 1 NPT pipe adapter
104402 T-type wall mount
104406 L-type wall mount
104410 C-type wall mount
3000Series
3000Series
*Inlet pressure 90 psi (6.2 bar) with 10 psi drop (0.7 bar)
Popular configurations
MODEL A (MM) C (MM) DRAIN
F354XX-XX0 8.429 (214.1) 10.929 (277.6) MANUAL
F354XX-XX1 9.315 (236.6) 11.815 (300.1) AUTOMATIC
MODEL B (MM) SERVICE INDICATOR
F354X1-XXX 1.496 (38.0) NONE
F354X2-XXX 2.165 (55.0) MECHANICAL
21. 40
Web site: fluids.ingersollrand.com
Technical data
Diaphragm Nitrile + nylon
Regulator body Aluminum
Regulator valve Nitrile + nylon
Regulator springs Steel
Gauge cover Nylon + polycarbonate
Regulator knob Acetal
O-rings Nitrile
Max inlet pressure (psi) 250
Temperature range (F) 23 – 140
Spring range options (psi)
0 – 30
0 – 60
0 – 140
10 – 200
Gauge port 1/8
Flow capacity — 3/4 port* 293 scfm
Flow capacity — 1 port* 290 scfm
Port Base
size model
3/4 - R374 5 1 - X X X
1 - R374 6 1 - X X X
41
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
3000 Series regulators
3/4 and 1 Ports
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
3 10 – 200 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-mount gauge
Thread type
5 3/4 NPT
6 1 NPT
E 3/4 BSP
F 1 BSP
Control option
0 Standard knob
Relieving option
0 Relieving
2 Non-relieving
Port size Pressure range Gauge Model
NPT psi
relieving • Standard knob control
3/4 0 – 30 No gauge R37451-400
3/4 0 – 60 No gauge R37451-200
3/4 0 – 140 No gauge R37451-100
3/4 0 – 140 Flush-mount gauge R37451-600
3/4 10 – 200 No gauge R37451-300
1 0 – 30 No gauge R37461-400
1 0 – 60 No gauge R37461-200
1 0 – 140 No gauge R37461-100
1 0 – 140 Flush-mount gauge R37461-600
1 10 – 200 No gauge R37461-300
non-relieving • Standard knob control
3/4 0 – 30 No gauge R37451-420
3/4 0 – 60 No gauge R37451-220
3/4 0 – 140 No gauge R37451-120
3/4 0 – 140 Flush-mount gauge R37451-620
3/4 10 – 200 No gauge R37451-320
1 0 – 30 No gauge R37461-420
1 0 – 60 No gauge R37461-220
1 0 – 140 No gauge R37461-120
1 0 – 140 Flush-mount gauge R37461-620
1 10 – 200 No gauge R37461-320
3/4 Pressure drop test
3/4 3000 SERIES REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 20 40 60 80 100 120 140
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104453 Regulator service kit (relieving)
104454 Regulator service kit (non-relieving)
104455 Tamper kit
104456 0 – 60 psi Spring
104457 0 – 140 psi Spring
104458 10 – 200 psi Spring
104334 0 – 140 psi Gauge flush mount
Accessories See page 65 for details
Model Description
104393-5 3/4 NPT lockout valve
104393-6 1 NPT lockout valve
104397 Modular clamp
104476-5 3/4 NPT pipe adapter
104476-6 1 NPT pipe adapter
104402 T-type wall mount
104406 L-type wall mount
104410 C-type wall mount
104419 Panel nut
104469 Gauge port block
3000Series
3000Series
Popular configurations
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
3/4 NPT (R37451-XXX)
1 NPT (R37461-XXX)
3/4 BSP (R374E1-XXX)
1 BSP (R374F1-XXX)
M62 X 1.5 Thread
.394 (10.0) Maximum panel thickness
1/8 NPT gauge port
(No gauge option)
2.051
(52.1)
2.008
(51.0)
2.047
(52.0)
5.216
(132.5)
7.223
(183.5)
4.091
(103.9)
3.543
(90.0)
Ø 2.339
(59.4)
3/4 NPT (R37451-XXX)
1 NPT (R37461-XXX)
3/4 BSP (R374E1-XXX)
1 BSP (R374F1-XXX)
M62 X 1.5 Thread
.394 (10.0) Maximum panel thickness
1/8 NPT gauge port
(No gauge option)
2.051
(52.1)
2.008
(51.0)
2.047
(52.0)
5.216
(132.5)
7.223
(183.5)
4.091
(103.9)
3.543
(90.0)
Ø 2.339
(59.4)
22. 42
Web site: fluids.ingersollrand.com
3/4 NPT (L36451-XXX)
1 NPT (L36461-XXX)
3/4 BSP (L364E1-XXX)
1 BSP (L364F1-XXX)
1.929
(49.0)
2.130
(54.1)
3.858
(98.0)
3.543
(90.0)
10.110
(256.8)
7.862
(199.7)
11.362
(288.6)
Clearance
for
maintenance
3/4 NPT (L36451-XXX)
1 NPT (L36461-XXX)
3/4 BSP (L364E1-XXX)
1 BSP (L364F1-XXX)
1.929
(49.0)
2.130
(54.1)
3.858
(98.0)
3.543
(90.0)
10.110
(256.8)
7.862
(199.7)
11.362
(288.6)
Clearance
for
Technical data
Lubricator body Aluminum
Lubricator sight dome Nylon
Lubricator inlet tube Urethane
Seals Nitrile
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 250
Temperature range (F) 23 – 175
Bowl capacity (oz) 3.7
Flow capacity — 3/4 port* 368 scfm
Flow capacity — 1 port* 328 scfm
43
3000 Series lubricators
3/4 and 1 Ports
Port Base
size model
3/4 - L364 5 1 - X X X
1 - L364 6 1 - X X X
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Adjustment option
1 Standard
Thread type
5 3/4 NPT
6 1 NPT
E 3/4 BSP
F 1 BSP
Fill option
0 Standard
Bowl option
1 Metal w/ sight glass
2 Metal
Port size Adjustment Bowl cap Fill Model
NPT option (oz) option
metal bowl
3/4 Standard 3.7 Standard L36451-120
1 Standard 3.7 Standard L36461-120
metal bowl w/ sight glass
3/4 Standard 3.7 Standard L36451-110
1 Standard 3.7 Standard L36461-110
3/4 Pressure drop test
3/4 3000 SERIES LUBRICATOR
0
1
2
3
4
5
6
7
0 50 100 150 200 250 300
Air Flow (SCFM)
PressureDrop(psi)
0
0.1
0.2
0.3
0.4
0 20 40 60 80 100 120 140
Air Flow (dm /s)
PressureDrop(bar)
Inlet Pressure 35 psig
(2.4 bar)
60 psig
(4.1 bar)
90 psig
(6.2 bar)
120 psig
(8.3 bar)
See page 77 for additional flow charts
Accessories See page 65 for details
Model Description
104393-5 3/4 NPT lockout valve
104393-6 1 NPT lockout valve
104397 Modular clamp
104476-5 3/4 NPT pipe adapter
104476-6 1 NPT pipe adapter
104402 T-type wall mount
104406 L-type wall mount
104410 C-type wall mount
Replacement parts
Model Description
104465 Lubricator bowl service kit
104466 Sight dome repair kit
104337 Metal bowl
104338 Metal bowl w/ sight glass
3000Series
3000Series
Popular configurations*Inlet pressure 90 psi (6.2 bar) with 7 psi drop (0.5 bar)
23. 44
Web site: fluids.ingersollrand.com
3/4 NPT (P3945X-XXX)
1 NPT (P3946X-XXX)
3/4 BSP (P394EX-XXX)
1 BSP (P394FX-XXX)
M62 X 1.5 Thread
.394 (10.0) Maximum panel thickness
2.045
(51.9)
5.215
(132.5)
4.091
(103.9)
3.543
(90.0)
2.047
(52.0)
Ø 2.337
(59.4)
“C”
Clearance
for
maintenance
“B”
“A”
1/8 NPT gauge port
(No gauge option)
3/4 NPT (P3945X-XXX)
1 NPT (P3946X-XXX)
3/4 BSP (P394EX-XXX)
1 BSP (P394FX-XXX)
M62 X 1.5 Thread
.394 (10.0) Maximum panel thickness
2.045
(51.9)
5.215
(132.5)
4.091
(103.9)
3.543
(90.0)
2.047
(52.0)
Ø 2.337
(59.4)
“C”
Clearance
for
maintenance
“B”
“A”
1/8 NPT gauge port
(No gauge option)
Technical data
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 250
Temperature range (F) 23 – 175
Spring range options (psi)
0 – 30
0 – 60
0 – 140
10 – 175
Bowl cap — manual drain (oz) 5.3
Bowl cap — auto drain (oz) 5.9
Gauge port 1/8
Flow capacity — 3/4 port* 236 scfm
Flow capacity — 1 port* 250 scfm
45
3000 Series piggyback filters / regulators
3/4 and 1 Ports
How to order
To configure the desired part number, use the chart below to select the port size,
thread type, and configuration options.
Note: Some menu combinations not available.
Please consult price book to verify.
Popular options are shown in red below.
Port Base
size model
3/4 - P394 5 X - X X X
1 - P394 6 X - X X X
Filter element
4 5-Micron
Thread type
5 3/4 NPT
6 1 NPT
E 3/4 BSP
F 1 BSP
Control / drain
option
0 Standard knob /
manual
4 Standard knob /
automatic
Relieving bowl
option
1 Relieving / metal
w/ sight glass
2 Relieving / metal
Pressure range PSIG
1 0 – 140 (no gauge)
2 0 – 60 (no gauge)
3 10 – 175 (no gauge)
4 0 – 30 (no gauge)
6 0 – 140 w/ flush-
mount gauge
3/4 Pressure drop test
3/4 3000 SERIES FILTER/REGULATOR
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 20 40 60 80 100 120 140
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104445 5-Micron element
104446 40-Micron element
104450 Metal bowl w/ sight glass, man.
104451 Metal bowl w/ sight glass, auto
104452 Filter bowl service kit
104453 Regulator service kit (relieving)
104454 Regulator service kit (non-relieving)
104455 Tamper kit
104456 0 – 60 psi Spring
104457 0 – 140 psi Spring
104458 10 – 200 psi Spring
104315 Replacement auto drain
104316 Replacement manual drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
104334 0 – 140 psi Gauge flush mount
104337 Metal bowl
104338 Metal bowl w/ sight glass
3000Series
3000Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Drain Spring range w/ Gauge Model
NPT psi
5 MICRON • METAL BOWL W/ SIGHT GLASS • relieving
3/4 Manual 0 – 140 Yes P39454-610
3/4 Auto 0 – 140 Yes P39454-614
1 Manual 0 – 140 Yes P39464-610
1 Auto 0 – 140 Yes P39464-614
Popular configurations
MODEL A (MM) B (MM) C (MM) DRAIN
P394XX-XX0 8.425 (214.0) 13.642 (346.5) 10.925 (277.5) MANUAL
P394XX-XX4 9.472 (240.6] 14.689 (373.1) 11.972 (304.1) AUTOMATIC
24. 46
Web site: fluids.ingersollrand.com
11.102
(282.0)
4.287
(108.9)
7.323
(186.0)
5.215
(132.5)
2.130
(54.1)
8.606
(218.6)
2.236
(56.8)
1.929
(49.0)
4.055
(103.0)
3.504
(89.0)
.433
(11.0)
5.276
(134.0)
4.409
(112.0)
Ø .433
(11.0)
Technical data
Metal /
Metal w/ sight glass
Max inlet pressure (psi) 250
Temperature range (F) 23 – 175
Spring range options (psi) 0 – 200
Filter element 5 micron
Filter bowl cap — manual drain (oz) 5.3
Filter bowl cap — auto drain (oz) 5.9
Lubricator bowl capacity (oz) 3.2
Gauge port 1/8
Flow capacity — 3/4 - 2 unit* 201 scfm
Flow capacity — 1 - 2 unit* 208 scfm
Flow capacity — 3/4 - 3 unit* 199 scfm
Flow capacity — 1 - 3 unit* 215 scfm
47
3000 Series combinations
3/4 and 1 Ports
F + R + L Combinations
F/R + L Combinations
3/4 Pressure drop test
3/4 3000 SERIES F-R-L COMBO
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300
Air Flow (SCFM)
SecondaryPressure(psig)
0
1
2
3
4
5
6
0 20 40 60 80 100 120 140
Air Flow (dm /s)
SecondaryPressure(bar)
30 psig
(2.1 bar)
45 psig
(3.1 bar)
60 psig
(4.1 bar)
75 psig
(5.2 bar)
90 psig
(6.2 bar)
Inlet Pressure - 100 psig (6.9 bar)
See page 77 for additional flow charts
Replacement parts
Model Description
104445 5-Micron element
104446 40-Micron element
104447 0.3-Micron element
104450 Metal bowl w/ sight glass, man.
104451 Metal bowl w/ sight glass, auto
104452 Filter bowl service kit
104461 Coalescing filter bowl, manual drain
104462 Coalescing filter bowl, auto drain
104453 Regulator service kit (relieving)
104454 Regulator service kit (non-relieving)
104455 Tamper kit
104456 0 – 60 psi Spring
104457 0 – 140 psi Spring
104458 10 – 200 psi Spring
104465 Lubricator bowl service kit
104466 Sight dome repair kit
104315 Replacement auto drain
104316 Replacement manual drain
104322 Metal bowl, manual drain
104323 Metal bowl, auto drain
104334 0 – 140 psi Gauge flush mount
104337 Metal bowl
104338 Metal bowl w/ sight glass
3000Series
3000Series
*Inlet pressure 100 psi (6.9 bar), 90 psi set (6.2 bar), with 33 psi drop (2.3 bar)
Port size Components Model
NPT Filter Regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/4 F35451-410 R37451-600 L36451-110 C38451-810
1 F35461-410 R37461-600 L36461-110 C38461-810
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/4 F35451-411 R37451-600 L36451-110 C38451-811
1 F35461-411 R37461-600 L36461-110 C38461-811
Port size Components Model
NPT Filter-regulator Lubricator
manual drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/4 P39454-610 L36451-110 C38451-610
1 P39464-610 L36461-110 C38461-610
Auto drain • Metal Bowl w/ sight glass • relieving • W/ gauge
3/4 P39454-614 L36451-110 C38451-611
1 P39464-614 L36461-110 C38461-611
11.102
(282.0)
4.287
(108.9)
7.323
(186.0)
5.215
(132.5)
2.130
(54.1)
8.606
(218.6)
236
6.8)
Note: Other combinations may be assembled by purchasing the individual components
separately. Modular connector kits are required to connect the individual units together.
25. 48
Web site: fluids.ingersollrand.com
Technical data
Flow capacity* 1 — 323 cfm (152 dm3
/s)
1-1/4 — 970 cfm (458 dm3
/s)
1-1/2 — 1,280 cfm (604 dm3
/s)
2 — 1,400 cfm (660 dm3
/s)
Operating temperature 32° – 150° F (0° – 65.5° C)
Max supply pressure Without pressure indicator — 300 psig (20.7 bar)**
With pressure indicator — 150 psig (10.3 bar)
Standard filtration 5 micron
Useful retention†
1 = 11.5 oz (.34 liters)
1-1/4 - 2 = 27 oz (.8 liters)
49
Super-duty series standard filters
1, 1-1/4, 1-1/2 and 2 Ports
*Inlet pressure of 150 psig (10.3 bar). Pressure drop of 5 psig (0.3 bar).
**Without pressure indicator – maximum supply pressure is 300 psig (20.7 bar).
†
Useful retention refers to volume below the quiet zone baffle.
1 Pressure drop test 1-1/2 Pressure drop test
2 Pressure drop test
1-1/4 Pressure drop test
Port size Element Weight Model
NPT (microns) lb (kg)
Manual Drain • Metal Bowl
1 5 5.5 (2.5) F35561-410
1-1/4 5 19.3 (8.7) F35571-410
1-1/2 5 19.3 (8.7) F35581-410
2 5 19.3 (8.7) F35591-410
Auto Drain • Metal Bowl
1 5 5.5 (2.5) F35561-411
1-1/4 5 19.3 (8.7) F35571-411
1-1/2 5 19.3 (8.7) F35581-411
2 5 19.3 (8.7) F35591-411
Super-DutySeries
Super-DutySeries
Replacement parts
Size Description Model
1 Size 5-Micron element 104506
1 Size Bowl kit 104507
All sizes Auto drain 104508
All sizes Manual drain 104509
1-1/4 - 2 Sizes 5-Micron element 104510
All sizes Pressure differential 104511
indicator
All sizes Wall mount pipe clamp 104512
All sizes Manual override drain 104513
for auto drain
0
1
2
3
4
5
0
0.1
0.2
0.3
PRESSUREDROP
bar
0 50 100 150 200 250 300
0 80604020 100 120 140
PSID
SCFM
dm
3
/s
AIR FLOW RATE
Inlet Pressure
PSIG
bar
30
2.1
60
4.1
120
8.2
150
10.3
90
6.2
bar
PSID
SCFM
dm
3
/s
0 0
1
2
3
4
5
0.1
0.2
0.3
0 50 100 150 200 250 300 350
0 20 40 60 80 100 120 140 160
PRESSUREDROP
AIR FLOW RATE
Inlet Pressure
PSIG
bar
100
7.0
150
10.3
90
6.2
30
2.1
60
4.1
5
4
3
2
1
0
0 200 400 600 800 1000 1200
PRESSUREDROP
0
0.1
0.2
0.3
bar
psid
0 100 200 300 400 500
cfm
dm
3
/s
AIRFLOW
Inlet Pressure
psig
bar
60
4.1
15
1.0
120
8.2
100
7.0
150
10.3
90
6.2
35
2.4
5
4
3
2
1
0
PRESSUREDROP
0
0.1
0.2
0.3
bar
psid
0 200 400 600 800 1000 1200
0 100 200 300 400 500
cfm
dm
3
/s
AIRFLOW
1400
600
F35-0C-000
Inlet Pressure
psig
bar
60
4.1
15
1.0
120
8.2
100
7.0
150
10.3
90
6.2
35
2.4
Models A B C D E F G
1-1/4 - 2 - Manual Drain 7.80 (198 mm) 7.76 (197 mm) 2.83 (72 mm) 16.24 (412.5 mm) 19.07 (484 mm) 3.88 (98.6 mm) 0.55 (14 mm)
1-1/4 - 2 - Auto Drain 7.80 (198 mm) 7.76 (197 mm) 2.83 (72 mm) 15.69 (398.5 mm) 18.52 (470 mm) 3.88 (98.6 mm) 0.55 (14 mm)
A
C
B
F
D
E
G
26. 50
Web site: fluids.ingersollrand.com
Technical data
Flow capacity* 1 — 419 cfm (197 dm3
/s)
1-1/4 — 741 cfm (350 dm3
/s)
1-1/2 — 710 cfm (335 dm3
/s)
2 — 860 cfm (335 dm3
/s)
3 — 1770 cfm (800 dm3
/s)
Operating temperature 32° – 150° F (0° – 65.5° C)
Maximum supply pressure Without pressure indicator — 300 psig (20.7 bar)††
With pressure indicator — 150 psig (10.3 bar)
Standard filtration (B1) 1.0-Micron, (C) 0.01-Micron
(D) 0.003-Micron ppm / wt**
Useful retention†
1 = 22 oz (.65 liters)
1-1/4 - 2 = 32 oz (.95 liters)
3 = 50.7 oz (1.5 liters)
51
Super-duty series coalescing filters
1, 1-1/4, 1-1/2, 2 and 3 Ports
*Inlet pressure 150 psig (10.3 bar). Pressure drop of 3 psig (0.2 bar).
**Filtration temperature of 70° F (21° C) @ 100 psig (6.9 bar) with typical compressor
lubricating oil and protected by Type “C” filter.
†
Useful retention refers to volume below the quiet zone baffle.
††
Without differential pressure indicator – Maximum supply pressure is 300 psig (20.7 bar).
Super-DutySeries
Super-DutySeries
Port size Element Weight Model
NPT (microns) lb (kg)
Manual Drain • Metal Bowl
1 .01 13.0 (5.9) F35561-310
1-1/4 .01 13.0 (5.9) F35571-310
1-1/2 .01 19.3 (8.7) F35581-310
2 .01 19.3 (8.7) F35591-310
3 .01 32.8 (14.9) F35501-310
Auto Drain • Metal Bowl
1 .01 13.0 (5.9) F35561-311
1-1/4 .01 13.0 (5.9) F35571-311
1-1/2 .01 19.3 (8.7) F35581-311
2 .01 19.3 (8.7) F35591-311
3 .01 32.8 (14.9) F35501-311
Replacement parts
Size Description Model
All sizes Pressure differential 104511
indicator
All sizes Wall mount pipe clamp 104512
All sizes Manual override drain 104513
for auto
1, 1-1/4 Sizes .01-Micron element 104514
1-1/2 - 2 Sizes .01-Micron element 104515
3 Size .01-Micron element 104516
1 Pressure drop test 1-1/2 Pressure drop test
2 Pressure drop test 3 Pressure drop test
1-1/4 Pressure drop test
0
0.5
1.0
1.5
2.0
2.5
3.0
0 50 100 150 200 250 300 350 400
0.05
0
0.10
0.15
0.20
PSID
bar
0 50 100 150
SCFM
dm3/s
PRESSUREDROP
AIR FLOW RATE
15
1.0
120
8.2
150
10.3
90
6.2
30
2.1
Inlet Pressure
PSIG
bar
60
4.1
0
0.5
1.0
1.5
2.0
2.5
3.0
0.05
0
0.10
0.15
0.20
PSID
bar
PRESSUREDROP
0 100 200 300 400 500 600 700
0 50 100 150 dm3/s
AIR FLOW RATE
200 250 300
SCFM
60
4.1
120
8.2
150
10.3
90
6.2
30
2.1
Inlet Pressure
PSIG
bar
15
1.0
5
4
3
2
1
0
PRESSUREDROP
0
0.1
0.2
0.3
bar
psid
0 200 400 600
0 100 300200
cfm
dm
3
/s
AIRFLOW
800
400
60
4.1
15
1.0
120
8.2
100
7.0
150
10.3
90
6.2
35
2.4
Inlet Pressure
psig
bar
5
4
3
2
1
0
PRESSUREDROP
0
0.1
0.2
0.3
bar
psid
0 200 400 600
0 100 300200
cfm
dm
3
/s
AIRFLOW
800
400
60
4.1
15
1.0
120
8.2
100
7.0
150
10.3
90
6.2
35
2.4
Inlet Pressure
psig
bar
PSID
5
4
3
2
1
0
PRESSUREDROP
0
0.1
0.2
0.3
bar
0 500 1000 1500 2000
0 200 400 600 800
SCFM
dm
3
/s
AIR FLOW RATE
2500
1000 1200
60
4.1
15
1.0
120
8.2
100
7.0
150
10.3
90
6.2
35
2.4
Inlet Pressure
PSIG
bar
Models A B C D E F G
1-1/4 - 2 - Manual Drain 7.80 (198 mm) 7.75 (197 mm) 2.83 (72 mm) 16.24 (412.5 mm) 19.07 (484 mm) 3.88 (98.6 mm) 0.55 (14 mm)
1-1/4 - 2 - Auto Drain 7.80 (198 mm) 7.75 (197 mm) 2.83 (72 mm) 15.69 (398.5 mm) 18.52 (470 mm) 3.88 (98.6 mm) 0.55 (14 mm)
3 - Manual Drain 8.94 (227 mm) 8.88 (225.5 mm) 3.48 (88 mm) 25.96 (660 mm) 29.44 (748 mm) 4.44 (112.8 mm) 0.55 (14 mm)
A
C
B
F
D
G
E