EIM is a recognized brand leader from Emerson Process Management – Valve Automation. The EIM brand, established in 1949, has pioneered the industry with innovation and technical performance. EIM actuators and controls have myriad applications. They are found in virtually every part of the energy and hydrocarbon processing industries – oil and gas, power, refining chemical and petrochemical. In addition, EIM actuators and controls have established a significant track record for outstanding performance in water/wastewater, food and beverage, pulp and paper, and marine applications. After undergoing rigorous quality checks, EIM products are sold and serviced through Emerson’s strategically located World Area Configuration Centers, distribution partners and knowledgeable technical service teams.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Mitsubishi inverter freqrol-d700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Mitsubishi inverter fr-e700 catalog-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
EIM is a recognized brand leader from Emerson Process Management – Valve Automation. The EIM brand, established in 1949, has pioneered the industry with innovation and technical performance. EIM actuators and controls have myriad applications. They are found in virtually every part of the energy and hydrocarbon processing industries – oil and gas, power, refining chemical and petrochemical. In addition, EIM actuators and controls have established a significant track record for outstanding performance in water/wastewater, food and beverage, pulp and paper, and marine applications. After undergoing rigorous quality checks, EIM products are sold and serviced through Emerson’s strategically located World Area Configuration Centers, distribution partners and knowledgeable technical service teams.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Mitsubishi inverter freqrol-d700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Mitsubishi inverter fr-e700 catalog-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Fuji tu dong hoa catalog frenic-aqua-fuji-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Vlt® hvac drives a complete range of advanced solutionsDanfoss India
Setting new standards, the modular VLT HVAC Drive integrates seamlessly with HVAC systems at the lowest cost of ownership in the market. Danfoss’ extensive experience in advanced variable frequency drive technology for HVAC applications has produced an unmatched product offering. The VLT HVAC Drive is suited for a range of needs, from simple follower operation to intelligent standalone control. From “drive only” to complete package solutions, the VLT HVAC Drive is so economical, flexible and user-friendly that it makes HVAC operation pure child’s play.Setting new standards, the modular VLT HVAC Drive integrates seamlessly with HVAC systems at the lowest cost of ownership in the market. Danfoss’ extensive experience in advanced variable frequency drive technology for HVAC applications has produced an unmatched product offering. The VLT HVAC Drive is suited for a range of needs, from simple follower operation to intelligent standalone control. From “drive only” to complete package solutions, the VLT HVAC Drive is so economical, flexible and user-friendly that it makes HVAC operation pure child’s play. For more info, visit http://www.danfoss.in/
Climatizare close control si chillere racite cu aer/apa dotate cu tehnologia turbocor.
Producatori RC Group si Smardt
Aplicatii: camere tehnice, IT, data center, telecomunicatii, camere de control, etc.
Mitsubishi inverter freqrol-f700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Giới thiệu về bộ điều khiển Siemens Simatic LOGO!
Bộ điều khiển Simens Simatic LOGO! thường được gọi Controller hoặc NanoController, có nguyên lý hoạt động tương tự PLC. Với Simatic LOGO!, Siemens đem đến bộ điều khiển lý tưởng cho các giải pháp tự động trong công nghiệp và xây dựng. Thiết kế dạng module làm cho LOGO! trở nên cực kỳ linh hoạt, các model của LOGO! cho phép cấu hình hệ thống đáp ứng nhu cầu của khách hàng.
Đặc tính kỹ thuật của bộ điều khiển Siemens Simatic LOGO!
- Mở rộng I/O
- Cho phép kết nối các module I/O (gồm DI+DO, AI, AO)
- Mở động tối đa lên đến: Dạng số (20 ngõ vào và 16 ngõ ra), Analog (8 ngõ vào, 8 ngõ ra)
Tính năng
- Mạch điện nhỏ gọn hơn, đấu nối đơn giản hơn
- Đồng bộ hóa thời gian
- Module có sẵn ở các dải điện áp
- Có thể lập trình và giao tiếp bằng cáp Ethernet
- Nhiệt độ hoạt động từ 0° đến 55°C
Truyền thông
- Tích hợp cổng truyền thông Ethernet với chuẩn SIMATIC S7 / Modbus 10/100 Mbit/s TCP/IP
Bảo mật
- Bảo vệ download/upload chương trình PLC bằng Password
Web Server
- Cho phép lập trình giao diện web server
- Cho phép kết nối từ xa giữa PC và CPU
- Vùng nhớ CPU: Bao gồm 2 vùng nhớ:
- Program Memory: lưu chương trình máy. Tối đa 8500 byte.
- Retentive Memory: Vùng nhớ lưu dữ liệu khi mất điện. Tối đa 250 vùng nhớ lưu.
Thẻ nhớ
- Cho phép gắn memory card để upload, download chương trình từ Logo!
- Lưu dữ liệu data log
Ứng dụng – Giải pháp của bộ điều khiển Siemens Simatic LOGO!
Bộ điều khiển Siemens Simatic LOGO! được ứng dụng rộng rãi trong các lĩnh vực như:
- Máy đơn (máy bơm, máy ép nhỏ, máy nén, bệ nâng, băng tải…)
- Nông nghiệp
- Nhà thông minh
- Phòng cháy chữa cháy,…
Learn about how HVAC can make a sick building and how variable refrigerant flow (VRF) HVAC systems can fix the health of the building.
More at https://www.femoran.com
Siemens catalog tong hop low voltage motorDien Ha The
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Mitsubishi inverter 1412789969 fr-e700_catalog_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog Biến tần Frenic Aqua Fuji-Beeteco.comBeeteco
Catalog: Biến tần Frenic Aqua Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog Frenic-HVAC (Fuji Electric): Biến tần Frenic-HVAC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Fuji tu dong hoa catalog frenic-hvac-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Dekon , onf of the professional supplier and exporter for VRF system in China. Have exported to more than 30 different countries our products. Dekon vrf system brief introduction here just brief intro of our products DRV, any more info needed, pls visit us at dekon-china.com or chinavrf.com
Mitsubishi inverter freqrol-d700 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-d700 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
ZENNO motorization
Catalogue: BLDC tubular motor - Mega series
A good motor for Green Building
Synchronized movement up and down well
One RF remote controller can control up and down shades/blinds and traverse curtain rail. End user only need one controller can control all window covering motors in one building!
Fuji tu dong hoa catalog frenic-aqua-fuji-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Vlt® hvac drives a complete range of advanced solutionsDanfoss India
Setting new standards, the modular VLT HVAC Drive integrates seamlessly with HVAC systems at the lowest cost of ownership in the market. Danfoss’ extensive experience in advanced variable frequency drive technology for HVAC applications has produced an unmatched product offering. The VLT HVAC Drive is suited for a range of needs, from simple follower operation to intelligent standalone control. From “drive only” to complete package solutions, the VLT HVAC Drive is so economical, flexible and user-friendly that it makes HVAC operation pure child’s play.Setting new standards, the modular VLT HVAC Drive integrates seamlessly with HVAC systems at the lowest cost of ownership in the market. Danfoss’ extensive experience in advanced variable frequency drive technology for HVAC applications has produced an unmatched product offering. The VLT HVAC Drive is suited for a range of needs, from simple follower operation to intelligent standalone control. From “drive only” to complete package solutions, the VLT HVAC Drive is so economical, flexible and user-friendly that it makes HVAC operation pure child’s play. For more info, visit http://www.danfoss.in/
Climatizare close control si chillere racite cu aer/apa dotate cu tehnologia turbocor.
Producatori RC Group si Smardt
Aplicatii: camere tehnice, IT, data center, telecomunicatii, camere de control, etc.
Mitsubishi inverter freqrol-f700 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Giới thiệu về bộ điều khiển Siemens Simatic LOGO!
Bộ điều khiển Simens Simatic LOGO! thường được gọi Controller hoặc NanoController, có nguyên lý hoạt động tương tự PLC. Với Simatic LOGO!, Siemens đem đến bộ điều khiển lý tưởng cho các giải pháp tự động trong công nghiệp và xây dựng. Thiết kế dạng module làm cho LOGO! trở nên cực kỳ linh hoạt, các model của LOGO! cho phép cấu hình hệ thống đáp ứng nhu cầu của khách hàng.
Đặc tính kỹ thuật của bộ điều khiển Siemens Simatic LOGO!
- Mở rộng I/O
- Cho phép kết nối các module I/O (gồm DI+DO, AI, AO)
- Mở động tối đa lên đến: Dạng số (20 ngõ vào và 16 ngõ ra), Analog (8 ngõ vào, 8 ngõ ra)
Tính năng
- Mạch điện nhỏ gọn hơn, đấu nối đơn giản hơn
- Đồng bộ hóa thời gian
- Module có sẵn ở các dải điện áp
- Có thể lập trình và giao tiếp bằng cáp Ethernet
- Nhiệt độ hoạt động từ 0° đến 55°C
Truyền thông
- Tích hợp cổng truyền thông Ethernet với chuẩn SIMATIC S7 / Modbus 10/100 Mbit/s TCP/IP
Bảo mật
- Bảo vệ download/upload chương trình PLC bằng Password
Web Server
- Cho phép lập trình giao diện web server
- Cho phép kết nối từ xa giữa PC và CPU
- Vùng nhớ CPU: Bao gồm 2 vùng nhớ:
- Program Memory: lưu chương trình máy. Tối đa 8500 byte.
- Retentive Memory: Vùng nhớ lưu dữ liệu khi mất điện. Tối đa 250 vùng nhớ lưu.
Thẻ nhớ
- Cho phép gắn memory card để upload, download chương trình từ Logo!
- Lưu dữ liệu data log
Ứng dụng – Giải pháp của bộ điều khiển Siemens Simatic LOGO!
Bộ điều khiển Siemens Simatic LOGO! được ứng dụng rộng rãi trong các lĩnh vực như:
- Máy đơn (máy bơm, máy ép nhỏ, máy nén, bệ nâng, băng tải…)
- Nông nghiệp
- Nhà thông minh
- Phòng cháy chữa cháy,…
Learn about how HVAC can make a sick building and how variable refrigerant flow (VRF) HVAC systems can fix the health of the building.
More at https://www.femoran.com
Siemens catalog tong hop low voltage motorDien Ha The
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Mitsubishi inverter 1412789969 fr-e700_catalog_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog Biến tần Frenic Aqua Fuji-Beeteco.comBeeteco
Catalog: Biến tần Frenic Aqua Fuji Electric
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog Frenic-HVAC (Fuji Electric): Biến tần Frenic-HVAC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Fuji tu dong hoa catalog frenic-hvac-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Dekon , onf of the professional supplier and exporter for VRF system in China. Have exported to more than 30 different countries our products. Dekon vrf system brief introduction here just brief intro of our products DRV, any more info needed, pls visit us at dekon-china.com or chinavrf.com
Mitsubishi inverter freqrol-d700 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
Mitsubishi inverter freqrol-d700 seriesDien Ha The
Mitsubishi ,
Catalog Thiết Bị Điện Mitsubishi , Catalog Thiết Bị Điện
Catalog Phụ Kiện Mitsubishi , Catalog Phụ Kiện,
Catalog Mitsubishi , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Mitsubishi tại https://dienhathe.com
Xem thêm các Catalog khác của Mitsubishi tại https://dienhathe.info
Để nhận báo giá sản phẩm Mitsubishi vui lòng gọi: 0907.764.966
ZENNO motorization
Catalogue: BLDC tubular motor - Mega series
A good motor for Green Building
Synchronized movement up and down well
One RF remote controller can control up and down shades/blinds and traverse curtain rail. End user only need one controller can control all window covering motors in one building!
42CT Ducted Chilled Water Fan Coil Unit for Standard Chiller and District Coo...Carrier Singapore
Carrier room fan coil terminals provide unsurpassed year round comfort, with high cooling performance. Carrier 42 series terminal requires very little space and is easy to install. Piping, drain and wiring connections are readily accessible to save installation time and field labor expense.
Catalog Biến tần Frenic ACE Mini (Fuji Electric) - Beeteco.comBeeteco
Catalog Biến tần Frenic ACE Mini
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
BTech ECE project final report using ArduinoBhuvi85107
This is my original work. The notes I have made on some pages were learnt over time, you can incorporate them in your electronics hobbying (although this site is mostly used for copying projects and not learning haha). Feel free to use any part of the project.
This is a presentation regarding the introduction to the heating and cooling system technology called variable refrigerant flow systems. (non-commercial)
Dear Customers, Dear Partners,
Consistently pursuing its long-term growth strategy based on innovation this year Webasto is once again launching several very
interesting products, which enhance our complete on board climate solutions with numerous additional benefits. The latest
illustration of this strategy comes with the very innovative character of our new variable speed BlueCool V-Series chiller which
has just been distinguished by the marine industry with the IBEX product innovation award 2014.
In this new marine catalog 2016 you will find not only all the information about this new revolutionary air-conditioning system
but also complete, practical insight in our large marine product portfolio. The purpose of this catalog is to enable you to build
complete climate solutions adapted to the demands of your customers for heating, cooling, light and fresh air on board. Should
you require a custom-made solution for a special project, our engineering teams also have the capability to develop customized
products to support you. Just get in touch with us!
International service and consistent quality of support are an essential part of our customer excellence programs. The marine
catalog is only one element of the complete set of tools and services with which we systematically provide to every Webasto
marine partner. Please don’t hesitate to register for our technical training sessions, request access to our dealer portals as well
as our Marine Navigator DVD, our diagnosis and calculation tools, our product information and marketing materials. We are
here to support your business so that your customers can enjoy the same high quality service with our products worldwide.
Our financial strength, our unique product portfolio, our large international dealer network and our understanding of your key
strategic challenges for the future have positioned us as your supplier of choice when it comes to complete comfort solutions.
We would like to thank you again for your continuous feedback and your trust in our products. Your success is our success!
Your Webasto Marine Team
Industrial Air Compressor Distributor In NY - CS Industrial Servicescsindustrialservices
CS Industrial Services is your trusted ELGi industrial air compressor distributor in New York. Call us for sales, services and rentals in the Buffloa NY area.
Brochure on Residential and Commercial Heat Pump System H2i by Mitsubishi Electric Available at Unique Indoor Comfort, located in the Northshore of Chicago
Get your dream bridal look with top North Indian makeup artist - Pallavi KadalePallavi Makeup Artist
Achieve your dream wedding day look with renowned North Indian bridal makeup artist, Pallavi Kadale. With years of experience, her expert techniques and skills will leave you looking flawless and radiant. Book today for your perfect bridal makeover.
The Jamstack Revolution: Building Dynamic Websites with Static Site Generator...Softradix Technologies
In this infographic, the Jamstack architecture emphasizes pre-rendered content and decoupling the frontend from the backend. It leverages static site generators (SSGs) to create fast-loading HTML files and APIs for dynamic functionality. Benefits include improved performance, enhanced security, scalability, and ease of deployment. Real-world examples include Netlify, Gatsby, and Contentful. https://softradix.com/web-development/
SMS2ORBIT | launched in 2022 in Mumbai's Andheri area, aims to be the most reliable Bulk SMS Service Provider in Mumbai.
If More Information About The SMS Service Provided By SMS2ORBIT Is Desired, Please Don’t Hesitate To Contact The Business Team. They Can Be Reached At
business@sms2orbit.com Or By Calling 97248 55877.
Looking for the Reliable Logistics Solutions in India? Discover unparalleled efficiency and reliability with our top-rated logistics services. We specialize in streamlining supply chains, ensuring timely deliveries, and providing cutting-edge tracking solutions. Our platform caters to businesses of all sizes, offering customizable logistics solutions to meet your unique needs. With a focus on innovation and customer satisfaction, we are your trusted partner in navigating the complexities of logistics in India. Choose us for seamless, cost-effective, and scalable logistics solutions. Experience the best in Indian logistics with our expert team by your side.
Best Catering Event Planner Miso-Hungry.pptxMiso Hungry
Miso-Hungry, led by Executive Chef Emilio Molina, is Islamorada's premier catering event planner. We specialize in sustainable, farm-fresh cuisine, using local ingredients to create unforgettable dishes. As a FollowTheFoodHMI branded company, we bring our culinary expertise across the U.S., connecting communities through exceptional food and personalized event planning. Let us showcase our family's passion and make your event extraordinary.
Comprehensive Water Damage Restoration Serviceskleenupdisaster
Find out how Disaster Kleenup's professional water damage restoration services can quickly and efficiently restore your property. Find more about our advanced techniques and quick action plans. Visit here: https://iddk.com/disaster-cleanup-services/flood-damage/
What Are the Latest Trends in Endpoint Security for 2024?VRS Technologies
In this PDF, Discover the top 2024 endpoint security trends, including zero trust, AI integration, XDR, cloud security, and enhanced mobile protection. VRS Technologies LLC supplies the top level Endpoint Security Service Dubai. For More Info Contact us: +971 56 7029840 Visit us: https://www.vrstech.com/endpoint-security-solutions.html
Unlocking Insights: AI-powered Enhanced Due Diligence Strategies for Increase...RNayak3
Explore how a risk-based approach to Enhanced Due Diligence can deliver effective Anti-Money Laundering (AML) compliance and monitoring in banking and financial services.
Experience the breathtaking beauty of a Waikiki sunset aboard the MAITAI Catamaran. Sail along the stunning coastline as the sun dips below the horizon, casting vibrant hues across the sky. Enjoy the gentle ocean breeze, refreshing drinks, and a relaxed atmosphere. This unforgettable voyage offers panoramic views of Diamond Head and the Waikiki skyline, making it the perfect way to end your day in paradise. Join us for a memorable sunset cruise you won't forget. Please visit our website: https://www.maitaicatamaran.net/ and call us at 808-922-5665 for additional information.
SECUREX UK FOR SECURITY SERVICES AND MOBILE PATROLsecurexukweb
At Securex UK Ltd we are dedicated to providing top-rated security solutions tailored to your specific needs. With a team of highly trained professionals and cutting-edge technology, we prioritize your safety and peace of mind.
Our commitment to excellence extends beyond traditional security measures. We understand the dynamic nature of security challenges, and our personalized approach ensures that every client receives a bespoke protection plan.
In the competitive realm of online business, visibility is key, and search engine optimization (SEO) serves as the cornerstone of digital prominence. As the demand for effective SEO solutions continues to soar, finding the best SEO company in Perth becomes imperative. Enter Simba Squad – a dynamic force dedicated to propelling your business to new heights of success.
Delightful Finds: Unveiling the Power of Gifts Under 100JoyTree Global
Stretch your budget and spread joy! This guide explores the world of gifts under 100, proving thoughtful gestures don't require a hefty price tag. Discover unique and practical options for birthdays, holidays, or simply showing someone you care. Find inspiration for every occasion within your budget!
DOJO Training Center - Empowering Workforce ExcellenceHimanshu
The document delves into DOJO training, an immersive offline training concept designed to educate both new hires and existing staff. This method follows an organized eight-step process within a simulated work setting. The steps encompass safety protocols, behavioral coaching, product familiarity, production guidelines, and procedural understanding. Trainees acquire skills through hands-on simulations and rehearsal prior to transitioning to actual shop floor duties under supervision. The primary aim is to minimize accidents and defects by ensuring employees undergo comprehensive training, preparing them effectively for their job roles.
Blessed Marine Automation offers cutting-edge marine automation solutions tailored to enhance vessel efficiency and safety. From advanced control systems to remote monitoring, our services empower maritime operations worldwide. Explore our comprehensive range of products and services to optimize your vessel's performance. https://www.blessedmarineautomation.com/
Solar power panels, also known as photovoltaic (PV) panels, convert sunlight into electricity, offering a renewable and sustainable energy solution. Composed of semiconductor materials, typically silicon, these panels absorb photons from sunlight, generating an electric current through the photovoltaic effect. This clean energy source reduces dependence on fossil fuels, mitigates greenhouse gas emissions, and contributes to environmental sustainability.
Learn about Inspect Edge, the leading platform for efficient inspections, featuring the advanced NSPIRE Inspection Application for seamless property assessments. Discover how the NSPIRE Inspection Application by Inspect Edge revolutionizes property inspections with advanced features and seamless integration.
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxamilabibi1
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docx
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...gitapress3
love problem solution astrologer
best love problem solution astrologer
online love problem solution astrologer
love problem solution astrologer in india
love problem solution astrologer in kolkata
love problem solution astrologer near me
love problem solution astrologer in ludhiana
love problem solution astrologer acharya ji
love problem solution astrologer in delhi
love problem solution astrologer amritsar
astrologer love problem solution
astrologer for love problem
astrology love problem solution
love solution astrologer
love problem solution specialist astrologer
love problem solution by astrologer
astrology love problem solution baba ji
love problem solve astrologer
love problem solution usa
love problem solution expert astrologer
astrologer for love marriage problem solution
love problem solution astrologer in mumbai
love problem solution muslim astrologer
love marriage specialist astrologer problem solution
famous love astrologer
love problem solution astrologer specialist
love problem solution astrologer tantrikBesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand baba ji LoVe marriage specialist Uk USA LonDOn panDit ji
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...
Unico Residential HVAC System Installation Guide
1. .
Residential Installation
“UNICO, Inc.” “The UNICO System”
UNICO, Inc.
7401 Alabama Avenue
Saint Louis, MO 63111
800.527.0896
fax 314.457.9000
www.unicosystem.com
Smaller Main Air Plenum
At typical 10" and 7" sizes, UNICO main air
plenums are 66% smaller than conventional
supply trunks. UNICO fits 12 nominal tons
in the same built space that a 3 nominal ton
conventional system requires. UNICO not only
provides greater comfort, but more available built
space for the end user.
Fit Anywhere Air Handlers
Compact, modular coils and
blowers fit into existing cavities and
eliminate the need for space-eating
mechanical areas. The UNICO
System air handlers can be installed
horizontally or vertically for maximum
flexibility.
Unique Flexible Small Ducts
2" i.d. (3.5" o.d.) or 2.5" i.d. (4.0" o.d.)
supply tubes are so small and flexible
they go around anything and fit almost
anywhere. Design custom homes without
HVAC system constraints or retrofit
older homes without compromising the
architecture.
Quiet Operation
Supply tubing is made of
spun-bound nylon, wrapped in
sound-dampening insulation for
ultra-quiet operation.
Outdoor Unit
The UNICO System can be paired
with single or multi-stage refrigerant
based outdoor condensing units,
air-to-water heat pumps, geothermal
heat pump systems, or chilled water
units.
Subtle, Blend-In Outlets
No big, ugly metal vents. Our
outlets are round or slotted,
and with dozens of standard
finishes – plus available custom
finishes – they will fit any
décor. Install in ceiling, floors or
sidewalls.
Architect/Engineer Design Flexibility
The UNICO System small ducting fits in wall and
ceilings – no need for soffits. In basements, the
plenum is no taller than the main support beam.
In many cases, The UNICO System eliminates
room build-outs for fan coils and ducting.
Free Design Services
UNICO provides free design services for
architects, engineers, builders, installers and
homeowners. All we ask is that you provide a
heat gain/heat loss calculation and we’ll provide
a complete system design. In addition, UNICO
specifications can also be downloaded from
www.arcat.com.
Methods of Heating
The UNICO System can provide heat
via heat pump coils, hot water coils,
or the UNICO supplemental furnace.
UNICO is also a perfect compliment
to radiant heating.
The UNICO SYSTEM can be used to cool or heat
homes or buildings that have no ductwork,
inadequate ductwork, or little space; or in any
application where superior indoor comfort is
desired. The UNICO SYSTEM adapts perfectly to
any type of residential setting. It also adapts to
many commerical and industrial applications.
Small Duct Central Heating & Air Conditioning
Indoor Product Information
www. u n i c o s y s t em. c om October 1, 2012 UNICO, Inc.
2. www. u n i c o s y s t em. c om 2 11 UNICO, Inc.
With the new EC motor and SCB (S.M.A.R.T. Control Board)
you have a high performance air distribution system that is
a step above the SDHV industry standard. Our advanced
software gives you unrivaled control of the EC motor, resulting
in a constant CFM across a wide range of operating conditions.
When compared to the industry, most EC motors are factory
programmed for specific airflow and do not allow changes which
limits your ability to provide a customized heating and cooling
solution.
Features
• Precise airflow control
• Several pre-set options to choose from
• Customizable in six different modes of operation, from minimum and
maximum CFM to maximum motor RPM
• Connect to a laptop or notebook to adjust the program through a
USB cable
• Dedicated UNICO web page to download software
• Addition of Low Heat setting which was not available with the ACB
Motor and Control Options
The new Green Series EC motor is the heart of the new air handler
series. The variable-speed fan motor adjusts speed to provide a consistent
flow of comfortable conditioned air with quiet operation. It features
advanced design characteristics for maximum efficiency, comfort, and
reliability. Key features of the new motor are:
• At low speeds the new EC motor is up to two decibels quieter
• The new EC motor is 42% more energy efficient at full speed and 62%
more efficient at low speed than our current PSC motor
• Can be used to upgrade existing air handlers manufactured after 2003
The new S.M.A.R.T. Control Board is the brains of the new air handler
series. Combined with the EC motor it provides the highest level of Indoor
Comfort that a homeowner demands.
Features of the SCB are:
• The ability to manage both airflow and motor speed according to the
needs of the thermostat and or zoning needs.
• Two options to set airflow
1. Programmable via a laptop by ordinary USB cable, or
2. On board, switch selectable pre-programmed settings
• Diagnostic feedback
• An enhanced soft start and soft stop
EC Motor & S.M.A.R.T. Control Board Training Courses
Countermen and Inside Salespeople Training
This class covers the basics of how aspiration works, what are the parts
that make up a UNICO System, basic questions to ask of their contractor
and how to obtain additional help as needed. Time required: 45 minutes
to an hour depending on interruptions. Equipment is not needed.
Introduction to UNICO
A shortened version of the all day class, primarily geared to contractors,
this class may or may not require equipment that is the choice of the
end user. We do not get into as much detail as the all day class on rules,
examples and parts. Class is approximately two hours. Equipment is
optional.
Outside Salesmen Training
(primarily for Wholesaler’s Salesmen)
This covers the basics of UNICO, parts, pieces and rules. Identifies target
characteristics for good UNICO contractor prospects as well as identifying
end users. Class is approximately two hours in length. Equipment is not
needed.
Sales Class for Contractors (NEW)
This assists the contractors to: Identify markets and ask the right
questions of the end user, how to lay out and quote a UNICO system
and how they can help to close the sale. We would also give tips
and tricks our contractors have developed over the years. Class is
approximately 1½ hours long. Equipment is not needed.
Single Day Hands-On Class
This is an all day class with a break for lunch. This class will
cover the following:
• Basics of UNICO
• Parts and pieces that make up a UNICO System
• Rules of installation
Break for lunch
• How to layout a UNICO System
(New for this year, incorporates the Wrightsoft demo program)
Not performed yet
• Applications
• Applications and Examples of UNICO
• Residential Retrofit
• Residential New Construction
• Light Commercial
• Spot Cooling
(Saved for the end, as it breaks a lot of rules on UNICO)
Assembly and testing of a two ton system This is a “hands-on” effort that
requires the full participation of the class. We will see the consequences
of what happens when rules are not applied.
Contractor Product Training
Contractor Product Training (CPT) includes lectures and extensive hands-on
training. Emphasis on the new Green Series and S.M.A.R.T. control
board will be a main part of this class. Lunch is included each day and the
class will cover the following:
Day 1:
• Comparison, SDHV vs. Conventional, diffusion/throw/return
vs. aspiration
• SDHV Principles of Operations
• System components, features and applications
• Duct design
• Plenum design
• System installation
• Balance, start and test, and troubleshooting
Day 2
• Chiller applications (benefits and load diversification)
• Components, performance, sizing and allowing for glycol
• Piping
• Start and testing
• Zoning basics for THE UNICO SYSTEM
• New electronic control module and installation
3. www. u n i c o s y s t em. c om 10 3 UNICO, Inc.
Features and Controls
Control Box Configuration SCB STD
Balanced wheels √ √
Direct drive motor √ √
Shaft key connection √ √
Quick motor replacement (QMR) √ √
Separate control box √ √
Control voltage transformer √ √
Screw terminal connections √ √
Heat pump AFS bypass √ **
Boiler relay √
Number of modes of operation 6 2
Adjustable low airflow mode √ √
Efficient ventilation mode √
Adjustable restrictor plate √
Point-to-point wiring √
Electric heater fan interlock √
Electric heater stage 3 lockout protection √
Chilled water relay √
Air cycle feature √
EAC, HRV, or ERV relay √
Potable water circulation √
Humidifier compatibility √
UniChiller Leader/Follower control √
Soft-start and Soft-stop √
Constant airflow √
Low airflow indicator √
Preset airflow settings √
Laptop configurable √
Laptop troubleshooting √
Optimized for zone damper systems √
Optimized for efficiency and sound √
** With separate relay included in cooling module
Model No. 2430 3036 3642 4860
Electrical
Characteristics*
208 – 230 Volts
/ 60 / 1 phase
208 – 230 Volts
/ 60 / 1 phase
208 – 230 Volts
/ 60 / 1 phase
208 – 230 Volts
/ 60 / 1 phase
Motor Size, HP (kW) 1/2 (0.37) 1 (0.75) 1 (0.75) 1 (0.75)
Motor Type
-STD, PSC PSC PSC PSC
-SCB EC
(variable speed)
EC
(variable speed)
EC
(variable speed)
EC
(variable speed)
Motor Speed,
RPM
-STD 1700 1700 1700 1700
-SCB 400-1800 400-1800 400-1800 400-1800
* Nominal Air Flow
Rate, CFM (L/s) 600 (283) 800 (377) 900 (425) 1250 (590)
* Plenum Static
Pressure, in. water
(Pa)
1.5 (373) 1.5 (373) 1.5 (373) 1.5 (373)
Minimum Plenum
Size, ID, inch (mm) 7 (178) 7 (178) 9 (229) 10 (254)
Dimensions (H x W x D) 17.5 x 25
x 13.75
17.5 x 30
x 13.75
17.5 x 38
x 13.75
17.5 x 38
x 13.75
M Series Blower Module
*SCB is also available in 110 Volt / 60 / 1 phase
Typical Blower Module with
Smart Control Board
SCB STD
The UNICO System modular blowers are designed for use with
the UNICO System small-duct high velocity (SDHV) system. The
blowers exceed the U.S. Department of Energy requirements for
SDHV systems requiring a minimum external static pressure of
1.2 inches of water (298 Pa) at the rated airflow when installed
with the compatible UNICO cooling module.
Motor and Control Options
• STD (standard model) – is the most economical and readily available.
It includes a single-speed motor with a variable speed controller to adjust
the low air speed delivery.
• S.M.A.R.T. Control Board – is part of the UNICO Green Series. This
control box includes a super efficient variable speed EC motor with the
UNICO SCB. The airflow is completely configurable using a PC.
Installation Guide
This instruction is a summary of the basic rules and applies
to most applications. For applications outside the scope of
this guide refer to the detailed design rules in the UNICO
catalog.
Duct Layout
Outlets
• Minimum 6 - 2" outlet, Minimum 5 - 2.5" Per Ton (3.5 kW). For
refrigerant cooling applications the airflow must be between 200 and 250
CFM per nominal ton [27 to 33 L/s per nominal cooling kW]. For hot water
or chilled water systems, refer to performance charts to determine the
required airflow. The allowable airflow range per outlet is 20 to 40 CFM
[9.4 and 19 L/s], where the typical outlet will deliver 35 CFM [17 L/s] if
the plenum static pressure is 1.5 inches [0.37 kPa] and the branch duct
length is 10-foot (3 meter) without any balancing orifices. Therefore, the
average project will require about 6 2" outlets per nominal ton [6 outlets
per 3.5 kW] although more will be needed if the branch ducts are longer,
balancing orifices are used, the plenum static pressure is less than 1.5
inches of water [0.37 kPa], or it is desirable to make the system as quiet
as possible. For example, two runs with 50% balancing orifices are equal
to one branch run without any orifices.
• 10% Rule. For supply ducts longer than 10 feet (3 meter), the air is
reduced in that run by 10% for every 5 feet over 10 (every 1.5 meter
over 3 meters). For example, a 30 foot [9 meter] run is 60% of an outlet
that is 10 foot [3 m] yielding a reduction of 40% (30-10=20, 20÷5=4,
4×10=40%).
• Consider Traffic Pattern. Place outlets out of traffic pattern. A corner,
5-inch [127 mm] from each wall, is a good location, or along walls, or in
soffits blowing horizontally. Consider floor outlets (with screens) for units
located in basement. Slotted outlets can be used for high wall locations or
in ceilings where there is insufficient room for bending tubing.
• Allow for Aspiration. Locate outlets so the air stream does not impinge
on any objects or people – at least 3 feet [1 m] away. Use outlet deflectors
and outlet balancing orifices sparingly as they disrupt the aspiration.
• Minimize Length, Minimize Restriction. Keep the supply duct length as
close to 10 feet [3 m] as possible and never less than 6 feet [1.8 meters].
Use the fewest number of bends as possible. Maximize the radius of
any bends making sure the bend in the sound attenuator tubing near the
outlet is at least 6-inch [152 mm].
Plenum
• Maximize Length, Minimize Restriction. Run main trunk (plenum) as
long as possible; it is better to lengthen the plenum if you can shorten
even two outlet runs. Use full flow tees with turning vanes (when
applicable) and full flow elbows. The maximum total plenum length is 150
ft [45 m]; consider the first tee equal to 30 ft [9 m] and elbows equal to 15
ft [4.6 m].
• 60/40 Rule. When using a tee split the flow as close to 50/50 as possible
– no more than 60/40. Always use a turning vane.
• 70/30 Rule. Turn the tee 90° to make a side branch with no more than 30
percent of the air. Do not use a turning vane
• Horseshoe Patterns. (Best Method). Use a tee at least 24 inches [610
mm] off the unit. For the 4860 unit, use 10-inch [254 mm] metal up to and
including tee; then use 9-inch [229 mm] in both directions. For the 3642
unit, use 9-inch [229 mm] insulated metal up to and including tee; then
use 7-inch [178 mm] in both directions. If possible, close the horseshoe
into a perimeter loop.
• Shotgun Pattern. For the 4860 unit, use 10-inch [254 mm] insulated
metal or fiberglass duct for the first 30 percent; then reduce to 9-inch [229
mm] if desired. For the 3642 unit, use 9-inch [229 mm] insulated metal or
fiberglass duct for the first 40 percent; then reduce to 7-inch [178 mm] if
desired. For the 2430 unit, 7-inch [178 mm] may be run the entire length.
• 24-inch (610 mm) Rule. Use at least 24-inch [610 mm] of straight
plenum before any fitting, such as an elbow, tee, or takeoff. Electric duct
heaters require 48 inches [1.2 m]. Avoid elbows directly off units.
• Space Takeoffs Evenly. Maintain distance between takeoffs as evenly
as possible. Space the takeoffs at least 6-inch [152 mm] apart and 12-
inch [305 mm] from end cap.
Sound
• Sound Attenuators. Always use at least 3 feet [1 m] of the UNICO
supplied sound attenuator supply tubing (UPC-26C or 226C) at the end
of each run. For runs up to 12 feet [3658 mm], you may use the sound
attenuator for the entire run. For greater lengths, use the aluminum core
supply tubing (UPC-25 or 225) with a 3 foot [1 m] sound attenuator at the
end.
• Return Air Duct Attenuation. Use the UNICO Return Air Duct (UPC-04),
duct-board, or sheet metal with acoustical duct liner. Never use flex duct
with a solid plastic liner in place of UPC-04.
• Isolation. Isolate the air handler with foam rubber strips under the unit.
Either hang the unit from the structure using angle iron framework under
unit (do not hang directly with hooks in the cabinet) or set on a platform.
Piping
• Secondary Drain Pan. Always use a secondary drain pan wherever
overflow of condensate can cause water damage. Do not trap secondary
drain line or connect to primary drainpipe. Place secondary drain line exit
so that it is apparent when being used. For example, pipe the drain line so
it drips on an outdoor windowsill and causes splashing to be noticed.
• Primary Drain. Always trap primary drain line and run drain line per local
plumbing codes.
• Refrigerant Lines. Follow the outdoor section of manufacturer’s
instructions for running refrigerant lines. Size and trap per the instructions.
• Check Total System Airflow. Check the airflow at each outlet with a
Turbometer centered over the outlet. Add up the cfm for all outlets – it
should not differ by +/- 5% from the design airflow.
4. www. u n i c o s y s t em. c om 4 9 UNICO, Inc.
Hot Water and Chilled Water
Refrigerant/Coils for R-407C/R-410A/R22
UNICO System designed and built evaporator coil
modules can be easily installed with the matching UNICO
System blower modules. See coil/blower match-up table
below. The evaporator can be matched to most types
of remote condensing units or heat pumps. See ARI
directory or call factory for capacities and ratings.
Features
• Unobstructed face area for better heat transfer and airflow
• Easily accessible and replaceable TX Valve
• Compatible with 407C/410A and R22 refrigerants
• Standard UNICO System ‘latch’ system
The coil is pressure tested and then factory leak tested. The drain pan is
constructed of stainless steel for maximum corrosion protection with a 3/4”
(19 mm) FPT drain connection. All refrigerant lines are sweat connections
extending on the outside of the cabinet.
Applications
The UNICO System designed and built chilled water coil modules can be
easily installed with the matching UNICO System blower modules (refer to
table below). The chilled water coil module can be used for zone cooling
in a central chiller system or in combination with a residential chilled water
unit. For large applications, multiple systems can be installed to cool more
than one zone. Capacities range from 15,400 BTU/hr to 52,400 BTU/hr
(4.5 to 15kW) for cooling and 19,200 BTU/hr – 127,900 BTU/hr (56 to 37.5
kW) for heating. For smaller applications use the M1218 unit (See Bulletin
30-10). The chilled water coil module is compatible with ground source
chillers for geothermal applications.
Construction
The cabinet is constructed of 22 gauge (0.030-in, 0.762-mm) galvanized
steel with removable access panels on both sides for ease of service.
The cabinet is fully lined with closed cell insulation. The cabinet does not
contain fiberglass insulation. Easy snap latches are included for quick field
assembly.
UNICO designed coils are constructed of evenly spaced aluminum fins
mechanically bonded to copper tubes. The tubes are 3/8” (9mm) diameter.
Full fin collars provide the greatest tube-fin contact for excellent heat
transfer. All coils are slanted, except the MC4860C or H model, which
feature an ‘A’ coil to provide the maximum amount of heat transfer surface.
Certified to UL Standard
1995 Conforms to CAN/
CSA Standard C22.2
NO. 236
UNICO products comply with
the European regulations that
guarantee the safety of the product.
M Series Coil Module
Refrigerant Cooling Module
“C” Coil Mfr. No. “H” Coil Mfr. No. Nominal Tons Dimensions
M2430CL1-B M2430CL1-E 2 thru 2 1/2 17.5 x 25 x 13.75
M3036CLI-B M3036CLI-E 2.5 thru 3 17.5 x 30 x 13.75
M3642CL1-B M2430CL1-E 3 thru 3 1/2 17.5 x 38 x 13.75
M4860CL1-B M4860CL1-E 4 thru 5 17.5 x 38 x 24.00
Includes R-410A refrigerant coil and expansion valve
Chilled Water Cooling Module (includes water coil*)
Mfr. No. Max. Cooling Capacity, BTUH Dimensions
M2430CL1-C 37,900 17.5 x 25 x 13.75
M3036CLI-C 46,100 17.5 x 30 x 13.75
M3642CL1-C 54,600 17.5 x 38 x 13.75
MC4860CL1-C 69,000 17.5 x 38 x 18.00
* Can be used with hot water for 2-pipe system
DX Coil
Hydronic Coil
Unico Warranty
A. ONE YEAR WARRANTY: UNICO, INC. (“Unico”) hereby warrants
to consumers (“consumer”) that Unico System® central air conditioning
and heat pump products (“product”) not previously sold to other
consumers are free from defects in material or workmanship for a period
of one (1) year from the date of original installation. This warranty is
in effect only if the product remains at the place of original installation.
Unico’s obligation under the terms of this limited warranty shall be
limited to repairing or replacing, at its option, free of charge f.o.b. its
factory at St. Louis, MO any part or parts of the product, excluding air
filters, which in Unico’s sole judgment are found to be defective; and
providing further the said part or parts be returned as provided below
within one (1) year from the date of original installation.
B. The foregoing warranty shall be null and void unless all of the
following conditions have been fully satisfied:
1. The product was properly installed by the installing contractor
in accordance with the installation instructions supplied with the
product.
2. The product has been properly operated and serviced at all
times in strict accordance with all of the applicable provisions of the
instructions furnished with the product.
3. The product has been used only for the purposes for which it
was designed and has at all times been operated with the proper
electrical characteristics.
C. In order to make a warranty claim, and before Unico shall have
any obligation under this warranty to a consumer, the consumer
must:
1. Notify the installer, who in turn should notify the distributor
promptly upon discovery of a condition believed to be caused by a
defect in manufacture or notify Unico, Inc., 7401 Alabama Avenue,
St. Louis, MO 63111, in writing giving full particulars of the claim.
2. Make available for inspection by Unico, or its representative,
the product or parts believed to be defective and if requested by
Unico, ship the product or parts prepaid to Unico, Inc., 7401
Alabama Avenue, St. Louis, MO 63111. No product or parts are to
be shipped to Unico without prior written authorization.
3. The replacement parts will be covered under this warranty only
to the extent of the unused portion of the original warranty period.
4. The replacement part only will be provided without charge.
D. This warranty is limited to the foregoing and does not cover or
apply to any of the following:
1. Product installed or operated outside the United States,
Canada, or Puerto Rico, or product removed from the original
installation site.
2. Product which was not properly installed by the installing
contractor, or the workmanship of such contractor.
3. Product which has not been properly serviced and maintained
or has been operated beyond its rated capacity or has been
structurally altered.
4. Product which has been in unusual service or for purposes
for which it was not designed, or whose performance has been
impaired by the addition of unauthorized components.
5. Product which has been damaged or as a result of improper
operation (such as inadequate voltage conditions or interruption of
electrical service), corrosive atmosphere, floods, lightning,
accidents, theft or any conditions beyond the control of Unico.
6. Components not manufactured by Unico.
7. The costs of labor, refrigerant, materials, or other expenses
incidental to the repair, removal, installation or replacement of the
product or any warranted parts.
8. Product that has been damaged during shipment or
installation.
E. THIS WARRANTY IS IN LIEU OF ALL EXPRESSED AND/OR
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. REMEDIES UNDER THIS
WARRANTY AS SET FORTH HEREIN ARE AT THE
EXCLUSION OF ALL OTHERS (EXCEPT AS TO THE EXTENT THEY
ARE REQUIRED BY ANY APPLICABLE LAWS) AND UNICO
NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ASSUME FOR
IT ANY OTHER OBLIGATIONS. IN NO EVENT SHALL UNICO BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE NO MATTER HOW ARISING OR FROM ANY
CAUSE WHATSOEVER, OR ANY AMOUNTS IN EXCESS OF THE
SELLING PRICE OF THE PRODUCT OR ANY PARTS FOUND TO BE
DEFECTIVE. UNICO’S OBLIGATIONS TO THE CONSUMER SHALL
BE LIMITED TO THOSE OBLIGATIONS SPECIFICALLY PROVIDED
FOR IN THIS WARRANTY.
NOTICE TO OWNER: Upon completion of installation this warranty
must be filled out by the installer and owner should keep in a safe place
for future reference.
LIMITED WARRANTY FOR UNICO SYSTEM
CENTRAL AIR CONDITIONING AND HEAT PUMP PRODUCTS
5. www. u n i c o s y s t em. c om 8 5 UNICO, Inc.
Supply Outlets
Slotted Outlets for 2" Duct
In addition to the round outlets,
UNICO also manufactures
rectangular outlets. The rectangular
outlets feature a narrow width slot
that gives a better appearance in a
sidewall installation. There are four
(4) different types of slotted outlets.
The UNICO System patented
90° slotted outlets (UPC-66 and
UPC-67A) are specially designed
to quietly turn the air inside a typical
wood frame stud wall cavity. The 90º outlets are particularly useful where
there is insufficient room to provide the minimum sound attenuator bend
radius. Other applications for the 90º outlet include placement near the
perimeter of a low-pitched roof, and in applications with only a small cavity
between a dropped ceiling and the roof.
The UPC-66 is made of cast aluminum and is designed for commercial
applications that prohibit the use of plastic ducting. Most applications will
use the UPC-67A which is identical to the UPC-66 but made of plastic and
intended for residential use. Use of the UPC-66 or UPC-67A will depend
on local code requirements. The UNICO System straight slotted outlet
(UPC-68) with its patent pending contour shape is designed for use where
placement of the standard round outlet is not practical. The straight slotted
outlets are particular useful where there is insufficient room for a round
outlet at the desired termination point. A typical application for the straight
slotted outlet would be placement in a cabinet soffit. The UPC-68 is made
of plastic and is intended for residential use. Both the 90° and straight
slotted outlets may also be used as ceiling outlets.
Specifications
Recommended airflow: 15 to 35 CFM
Recommended number
of outlets: 6 per nominal ton
Slotted outlet material: Aluminum, cast (UPC-66) plastic, HDPE, black
(UPC-67A/68) UL-94 Rating - HB
Trim plate material: Plastic, ABS, white, paintable
Firestop, Duct Outlet for 2" Duct, 1-hour, UL-555C*
Designed for floor, ceiling, or wall applications where the supply outlets are
located in a 1-hour or less F-rated structure. The firestop is designed for
static conditions, meaning that the fire suppression system should turn off
the air flow in the event of a fire.
It is dimensionally identical to the standard UNICO round outlet (UPC-56B)
and should be installed in the same manner as all other UNICO round
outlets.
Part Number: UPC-56FR – X (X = Quantity in box)
Listed Duct Outlet, 1-hour F-Rating per UL 555C
Package Contents: Firestop (White), 2 Toggles and Screws per outlet,
Instruction sheet
*Patent Pending
The UNICO System Supply Outlets are used to terminate
and anchor the Supply Duct to a ceiling, floor, or wall and to
provide quiet delivery of high velocity air to the conditioned
space. The 0.25-inch (6 mm) raised face plate is the only part
visible in the room. UNICO round outlets are available in a
variety of colors and materials. The standard Supply Outlet
(UPC-56B) comes in white plastic.
2.0" and 2.5" Round Outlets
The wood faced outlet (UPC-57) is identical in size to the standard
outlet except for the unfinished solid wood face, which can be stained
and finished to match your existing floor. The last two spaces (XX) in the
part number for the wood outlet designate the wood type. Wood outlet
faces are offered in a variety of wood types.
For use in vaulted ceilings, UNICO offers the 2” white UPC-58-1-XX
outlet which includes an angled face. This outlet is available with the
faceplate angled at either 15º or 25º.
All white outlets can be painted or stained to match any décor. The UPC-
56B is available in black, brass, or chrome in addition to the standard
white. It is shipped with toggles and screws. Standard installation and
outlet kits include the white UPC-56B outlet.
Specifications
Recommended airflow: 2” outlet 30 to 35 CFM (14 to 16.5 l/s)
2 1/2” outlet 40 CFM
Recommended number 2” outlet 6 per nominal ton (1.7 outlets per kW)
of outlets: 2 1/2” outlet 5 per nominal ton
Outlet material: 30% glass filled Polypropylene UL-94 Rating – HB (UPC-
56B/57, UPC-58 base) wood, unfinished (UPC-57 faceplate)
Size of opening: 2" outlet: 3-3/8" (86-mm)
2 1/2" outlet: 4" (100-mm) or 4 1/2" (114-mm)
U1218 Fan Coil Unit
The UNICO System patented* 1218 Air Handler is
designed for use with the UNICO System small-duct
high velocity (SDHV) system. The blowers exceed the
U.S. Department of Energy requirements for SDHV
systems requiring a minimum external static pressure
of 1.2 inches of water (298 Pa) at the rated airflow
when installed with the compatible UNICO cooling
module.
Motor and Control Options
• SCB (S.M.A.R.T. Control Board) – is part of the UNICO Green
Series. This control box includes a super efficient variable speed EC
motor with the UNICO SCB (S.M.A.R.T. control board). The airflow is
completely configurable using a PC.
• STD (standard model) – is the most economical and readily
available. It includes a 3 speed motor.
Model No. 1218
Electrical Characteristics 208 – 230 Volts / 60 / 1 phase)
Motor Size, HP (kW) 1/3 (0.25)
Motor Type
-STD, PSC (single speed)
-SCB EC (variable speed)
Motor Speed, RPM
-STD 1700
-SCB 400/1800
* Nominal Air Flow Rate, CFM (L/s) 450 (0.212)
* Plenum Static Pressure, in. water (Pa) 1.5 (373)
Minimum Plenum Size, ID, inch (mm) 7 (178)
Dimensions (H x W x D) 12 H x 20 W x 38 L
6. www. u n i c o s y s t em. c om 6 7 UNICO, Inc.
Electric Furnace
Supply & Sound Attenuator Duct
The electric furnaces are designed to provide primary heating or
auxiliary heating in a heat pump system. The model numbers,
kW, and UNICO System match-ups are shown in the table
below:
Features
• Galvanized insulated sheet metal cabinet enclosure
• Can be converted to a duct heater
• Magnetic de-energizing contactors for each element
• Line level auto limit primary safety set @ 165ºF (74ºC)
• Line level fuse link back-up safety
• Fan interlock control, fan signal proving switch
• Low air flow pressure switch
• Circuit breakers on all units
• Time delay sequencers for a gradual “stepped” power draw
(softer start)
• Low voltage terminal strip (24 volt control)
• Specially designed tight cabinet for small duct, high velocity systems
• Single Supply (all units) or dual supply (15 and 20kW)
The aluminum supply tubing and sound attenuator is an
insulated flexible air duct. The insulation is designed to prevent
condensation from forming on the outside of the duct and to
minimize thermal losses to the surrounding environment.
Electric Furnaces
Model Number Nominal kW Rating UNICO System Match-up L Inch
WON0202-B 2 All sizes 13
WON0502-B 5 All sizes 13
WON0504-B 5 All sizes 21
WON0752-B 7.5 All sizes 16
WON0754-B 7.5 All sizes 21
WON1002-B 10 2430, 3642, and 4860 16
WON1004-B 10 2430, 3642, and 4860 21
WON1502-B 15 2430, 3642, and 4860 21
WON1504-B 15 2430, 3642, and 4860 21
WON2002-B 20 3642, 4860 24
Features
The supply and sound attenuator tubing is offered in two diameters
with several different choices of insulation thickness. In most cases, the
standard supply tubing should be used. However, for extremely cold or
humid environments or where the local building code requires a specific
R-factor and the duct is installed in an unconditioned space, use the R4,
R6, or R8 products. The R4, R6, and R8 ducts have thicker and heavier
insulation than the standard model to reduce thermal losses.
Construction
The aluminum supply tubing is supplied in 25-foot (7.7- m) lengths while
the sound attenuator tubing is supplied in 12- foot lengths. Both the
aluminum and sound attenuator tubing can be cut as needed. As shown in
these images, both the standard and R-4 models have 3 components.
The inner layer/core is made of two-ply corrugated aluminum for
the supply tubing or spun bound nylon for the sound attenuator.
The outer jacket for both models are made of two-ply reinforced
reflective mylar; providing a vapor seal to prevent leakage
and moisture migration, and increases the insulation factor by
reducing the radiant heat transfer. Fiberglass blanket insulation
fills the void between the jacket and core of the tube.
The standard and the R-4 duct have one insulation layer and vapor
barrier. The R6 and R8 ducts both have two layers of insulation and
a double vapor seal for both supply and sound attenuator tubing.
All UNICO System modular air handlers are shipped from
the factory configured for horizontal airflow but may be also
configured for vertical up-flow with the addition of a vertical
conversion kit. Most applications designed for vertical
configuration use a base plenum to elevate the unit for proper
condensate drainage. The UNICO System MV module
eliminates the need for the installer to build a base.
Features and Scope
The MV module features a built in secondary drain pan with a 3/4” PVC
socket connection, pleated filter, and place for an optional hot water coil.
The MV module features access panels on both sides so that the heating
coil may be inserted from either side.
The module may be connected to a heating module return adapter, UPC-
104, or operate as a free or “wild” return. If the air is filtered elsewhere,
such as at a filter grille, then the central filter in the MV may be removed.
Return Grille & Filter
Includes throwaway filter, two duct bands, and clips. Rough-in dimensions
are shown.
Vertical Plenum (MV) Module
Return Air Plenum Module
Application
The UNICO System designed and built Return Air Plenum (RAP) is easily
installed with the matching UNICO System modular air-handling units. The
RAP is designed specifically for multiple return duct systems. The plenum
comes without any return openings so the installer can cut whatever
openings are necessary for any number of return ducts. The top and all
three sides of the RAP can be used for return air connections. Plus, it
includes a centrally located filter accessible from either side of the cabinet.
The RAP is also ideal for bringing in outside air and combining it with
return air, effectively changing the RAP into a mixing box.
Return ducts can be any material so long as the duct is insulated, has
acoustical properties, and is the correct size.
P/N Duct
Diameter
Dimensions
Filter Size
A B
UPC-01-1218 12 (300) 20.25 (514) 14.25 (362) 14 x 20 (350 x 500)
UPC-01-2430 14 (350) 25.25 (631) 14.25 (362) 14 x 25 (350 x 625)
UPC-01-3642 18 (450) 30.25 (756) 14.25 (362) 14 x 30 (350 x 750)
UPC-01-3036 18 (450) 30.25 (756) 24.25 (594) 24 x 30 (610 x 750)
UPC-01-4860 20 (508) 30.25 (756) 24.25 (594) 24 x 30 (610 x 750)
UPC-01-4860NC 20 (508) 30.25 (756) 20.25 (514) 20 x 30 (500 x 750)
Model Dimensions Filter Size
M2430R1 17.5 x 25 x 13.75 14 x 25 (356 x 635)
M3036R 17.5 x 38 x 13.75 30 x 17 (762 x 432)
M3642R1 17.5 x 30 x 13.75 14 x 38 (356 x 965)
Return Grill