Explains information regarding the UBS Construction System

1. Universal Building Solutions 26/08/2015
Introduction:
Home affordability for the average person is becoming no more than a dream, as construction
costs continue to spiral out of control across the entire building industry, be it residential,
commercial or industrial properties the story is always the same, costs are on the increase and
becoming less affordable for the majority of people.
Not only is construction affordability rising beyond reach for the masses its becoming
increasingly difficult for developers, construction and building companies to make reasonable
profits. High cost for labor and building materials has an effect at every level in the industry
from the developer, builder, right through to the end user. We have all see projects that are
uncompleted because the developer or builder has run out of funding, completed buildings
unoccupied or unsold simply because people cannot afford to lease or buy these buildings due to
their high cost of construction.
UBS has developed a new construction method utilizing advanced building technology
("Integrated Building System" IBS) and innovative construction materials which will provide
structurally superior, faster build, energy efficient, and environmentally friendly buildings.
The technology that's been developed is a exceptional building solution package that combats all
of the issues confronting the construction industry and the end consumer markets. UBS has
developed its technology into a complete package, addressing many of the issues mentioned
above as well as environmental issues associated with in the construction Industry throughout
our world today.
Our system targets both the manufacturing of building materials and how these materials are
used within the construction process itself. This new advanced building system is not only
superior, reducing build times by up to 70%, it's also extremely cost effective, affording savings
on construction starting at around 30% to 50% below normal conventional building costs.
Delivering buildings that are structurally stronger, energy efficient and environmentally friendly,
any competent Architect, Engineer or Construction professional can easily understand this
Technology as its internal structure works on the well known principals of column and beam
construction.
Advancements with our technology has made the system so easy to use that even semi & non
skilled workers can construct buildings with ease, which will reduce the cost of construction by
limiting the amount of man hours expensive tradesmen are required on site.

2. System Overview:
Universal Building Solutions technology comprises of a rigid cellular fire retardant high quality
insulation material (EPS) designed to act as a integrated form-work. Our advanced technology
includes, columns and beams, flooring, wall, ceiling, and roofing systems. (It's a total building
system)
UBS combines normal engineering practices within a new superior construction method know as
a Integrated Building System (IBS). IBS provides greater flexibility in all aspects of construction
enabling Architects and Engineers to design lightweight yet structurally stronger Eco friendly
energy efficient buildings. Engineered originally for green energy efficient Eco friendly housing
construction, UBS advanced production manufacturing processes can now provide products to
suit all construction requirements.
The system can be engineered specifically for earthquake and cyclone regions with ease,
our technology is based on normal column and beam engineering principals that enables
construction companies to complete projects up to 70% faster, structurally superior and less
expensive buildings.
Versatility
UBS building system can be combined with normal construction methods to help speed up
construction build times and reduce the dead load weight of a building. (less weight means you
can reduce costs within the substructure required to support a building)
A simple example would be, if UBS wall block were used to infill walls on multi story
buildings, which would not only greatly reduce weight. It would speed up the buildings
completion date and provide energy efficient walls that would lower heating and cooling costs,
reduce sound transfer.......

3. Speed and simplicity
Every product UBS has designed takes only minutes to install, reduces dead load weight of the
structure and reduces the amount of materials required to complete a project, (Concrete, re-bar,
cement, plaster, and so forth) where in contrast the same building function using conventional
building methods and materials takes hours if not days to complete, substantial savings are made
on
 Basic material cost (UBS building material costs are extremely price competitive)
 Reduces materials required on a project (our products design reduces the amount of
concrete and re-bar required by up to 50%)
 Lower labor costs (reduced build times - less man hours required for general labor, also
reduces the amount of man hours required for expensive skilled tradesmen on site) Lower
paid semi to non skilled workers can complete most of the building systems installation.
 Machinery and equipment hire. (reduces the time scaffolding and other building
machinery is required on site by up to 70%)
 Minimal site cleanup and waste removal costs (UBS building system produces almost no
waste material during the construction stage)
 Holding costs (Most construction projects use either borrowed money or investment
capital - these funds come at a cost and should be calculated somewhere within a project
cost structure, because a project constructed with UBS materials and IBS system will be
completed up to 70% faster these savings should be added back into the projects balance
sheet to show the true price advantages this technology has to offer)
 Return on Investment (Once again due to the speed any project could be completed
calculations that need to be added back into a balance sheet, as to how fast a return on
Investment could be available. Projects could be ready for sale, lease or simply occupied
months or even years faster than conventional building methods depending upon the size
of the project.)
For example, a typical construction project a single story 4 x 2 home built using the UBS system
would be completed within 2 to 4 weeks compared to using conventional building methods build
time of 4 to 6 months. (costs such the rent savings on a property while your new homes being
built - or the extra return on a investment property that's rented or sold months early should all
be added back into the balance sheet) The benefits of a speedy build time are many if you are
prepared to do the MATHS.

4. Base materials used to maufacture UBS Construction Products
EPS: what is EPS ?
Expanded Polystyrene insulation (EPS) is a lightweight, rigid, closed cell insulation. EPS is
available in several compressive strengths to withstand load and back-fill forces. This closed-cell
structure provides minimal water absorption and low vapor permanence.
Commonly used as insulation for walls, foundations and roofing, there are many benefits to
selecting EPS products:
• Long-term R-Value (“R” is the resistance to heat flow)
• Energy efficiency
• Constant thermal resistance
• Measurable energy savings
• Strength
• Sustainability
• No growth of bacteria, nor will it decay over time
• Dimensional stability
• Chemical inertness
• Low cost
EPS Insulation is composed of organic elements – carbon, hydrogen and oxygen – and does not
contain chlorofluorocarbons (CFCs) or hydro chlorofluorocarbons (HCFCs).
EPS : R - Value (the capacity of an insulating material to resist heat flow, the higher the R -
Value the grater the insulation Factor)

5. XPS : what is XPS ?
XPS stands for Extruded Polystyrene. XPS foam board is essentially liquefied then molded and
compressed Styrofoam. XPS panels can come un faced or faced typically with a foil air/vapor
barrier. The R-value is about 5 per inch. This type of rigid foam won’t absorb water and can act
as an semi-impermeable vapor barrier. UBS recycles all its waste EPS from it product
manufacturing process and turns it into products used within the construction industry. This
procedure maximizes profits and eliminates waste which is helpful to the environment.
MgO : what is Mgo ?
Magnesium oxide or MgO is used as a basic refractory material for crucibles and as a principal
fireproofing ingredient in construction materials. As a construction material, magnesium oxide
cements have several attractive characteristics: fire resistance, moisture resistance, mold and
mildew resistance, and strength.
Before the widespread 20th century use of Portland cement magnesium oxide and magnesium
chloride based cements were numbered amongst the world’s popular cement products. Once the
introduction of Portland cement essentially cornered the market in the latter part of the 19th
century, serious public health issues began to be quietly recognized, documented, and
scientifically verified as being directly linked to the use of limestone/gypsum based cement and
concrete products. In contrast to this sobering reality magnesium cements have consistently
proven to be superior in strength, versatility, and environmental integrity
Availability and Benefits of Magnesium/Phosphate based cements:
Magnesium deposits exist in abundance in every corner of the earth and cover roughly 8% of the
world’s surface. Depending upon where they are mined, magnesium oxide and magnesium
oxide/magnesium chloride cements require only 20% - 40% of the energy required to produce
Portland cement. Phosphates are available from many sources ranging from phosphoric rock to
animal wastes and fermented plants, which historically were used to “react” with various oxides
to produce these environmentally friendly, non-toxic cements.
Why dose UBS use these materials to manufacture it products
Expanded Polystyrene foam (EPS) is a versatile plastic insulation product offering excellent
insulation properties at a low cost, available in a wide range of densities for residential
commercial and industrial applications such as foundations ,walls, ceilings and roofing materials.
UBS standard block system has a R-Value of 7.4 and is available in custom blocks and panels
that are designed to make all stages of construction easier. EPS Contains no CFC’s, HCFC’s,
HFC’s or formaldehyde . It is inert non-nutritive and highly stable , and therefore will not
decompose , decay or produce undesirable gases or leachates.

6. EPS as a sound barrier and insulator
EPS applications are especially beneficial in diminishing noise transmission in structures such as
hotels, condos, multi-family buildings, theaters and structures built near airports and busy roads.
EPS insulation will greatly reduce both heating and cooling costs of your building, there is no
better insulation than EPS, unlike other insulation materials EPS will not lose any of its qualities
over time.
EPS is 100% recyclable so there is no wasted materials within the manufacturing process .
UBS specially formulated Magnesium Oxide coating (MgO) applied to the EPS system has been
specifically designed to make a positive impact on the environment. Known as MgO it is a
GREEN building product that is used as a -
• Fireproofing additive.
• Alternative to Gypsum board.
• Alternative to plywood.
• Alternative to cement and plaster.
Coating used on our products has benefits such as
 Fireproofing.
 Water resistant.
 Highly impact resistant. (2 - 3 times stronger than cement)
 Insect and rodent resistant.
 Safe to use and will not conduct electricity.
 Environmentally friendly.
Products manufactured :
UBS has developed a manufacturing system to produce a wide range of building materials from
one fully adjustable versatile plant.
1) Wall block and Construction panel systems
2) Fence panels – including LED lighting where required (panels only 40mm thick)
3) Flooring panels – suspended slab integrated form-work where the underside becomes the
ceiling of the room below.
4) Roofing panels - that can become the ceiling of the room below.
5 )Columns and Beams - sizes as required
6) Under slab pod system – which reduce the amount of concrete used.
7) Magnesium Oxide board (MgO) wall board and MgO structural flooring boards

7. A number of additional products can be manufactured utilizing recycled and virgin materials if
required, for example:
1) Interior wall insulation (various types XPS & EPS insulation panels)
2) Roofing insulation (XPS & EPS insulation panels)
3) Foundation insulation (XPS & EPS insulation panels)
These additional products can be manufactured out of recycled materials which are produced
from normal operational procedures within the factory (Waste product from cutting mother
blocks into blocks and panels and the EPS left over once the structural core holes have been cut)
When our block are manufactured and the core hole are cut into the building material up to 40%
of the base material becomes waste, UBS has now developed internal processes where this waist
material can be recycled and turned into valuable building products, maximising efficiency and
profits within the business system.
Types of buildings the UBS system can be used to construct
UBS building material and construction systems have been design in such a way that it's
impossible to tell the difference between a building that's constructed from our IBS system and a
building that's been built using conventional construction methods simply by looking at the
building externally. The differences only become apparent once you feel the energy efficiency of
the thermal qualities and the vastly reduced sound penetration between walls our building
system has to offer.

8. The building (photo above) shows a conventional building on the (left) and a UBS building
system addition built onto the (right) side of the building, our system is so versatile it can
produce building materials for low cost housing up to expensive buildings simply by adjusting
the machinery settings to the type of projects at hand.
UBS Advanced Technology has developed a total building system to which there are no limits to what the
system can be used for in construction, Industrial & Commercial factories, warehouses, shopping centers,
resorts, hotels, renovations and extensions, walls and fencing, housing of every style you can imagine.

9. World Market (7.3 Billion people in 196 countries)
The principal has established an operational material coating pilot factory in Long An province
Vietnam to demonstrate the manufacturing process to potential licensees, also within the grounds
of the factory a 2 story display building has been constructed to demonstrate to Engineers and
Architects all the benefits the IBS system has to offer over conventional construction methods.
Four (4) years has been invested in developing and testing all the necessary machinery and
system to manufacture the materials used within this innovative construction system. Intellectual
Property (IBS) Machinery used to manufacture Universal Building Solutions materials are from
the principals own designs and need to be manufactured to UBS specific design specification.
(Intellectual Property, IP)
The principal has consulted experts from within the construction industry to obtain extensive
knowledge for the development of the Universal Building Solutions construction system.
(Integrated Building System, IBS)
Within this four (4) year period the principal has developed a method of constructing buildings
that international construction experts are referring to as the "most innovative system in the
world" and “the best new system they have seen"
Universal Building Solutions Advanced Technology is in a strong position to extend their
developments worldwide through a series of licensing agreements, sales of its own purpose
designed manufacturing machinery, innovative Eco friendly building materials and specifically
formulated coating mixtures. (Intellectual Property)

10. Any construction method utilizing innovative technology and products that can deliver
structurally superior, faster build, environmentally friendly materials combined with substantial
savings on building costs into one total package requires serious investigation from within the
construction Industry.
Growth Market.
Governments throughout the world have now imposed regulations that require energy efficient
housing be constructed in an attempt to try and reduce the demand on energy usage, it's not
unusual these days for many cities metro areas to suffer from power supply blackouts when the
demand for energy to heat or cool homes, offices, factories becomes more than the power system
can supply.
These new regulations have also pushed construction costs even higher, in some instances by as
much as 20% which has made construction affordability for many people completely beyond
their budget. Many countries such as Australia, America, New Zealand, Canada and the United
Kingdom which once home ownership was everyone's goal, construction costs have now become
so expensive that most people can only afford to rent a property. (creating a property crises in
relation to affordability)
Every country in the world is now seeking new environmentally friendly, green, low carbon and
affordable methods of constructing houses and buildings .Universal Building Solutions has
developed not only a new way in which to construct buildings to meet these modern demands, It
has developed a complete package for the expansion of its technology Globally utilizing a
manufactures licensing system similar to a franchise which will enable companies to produce
these new innovative building materials and IBS construction system.
Other issues that UBS wishes to address :
Environmental Pollution and the Worlds brick manufacturing industry :
Brick production is made in approximately 300,000 kilns worldwide however 77% of this
production is concentrated in four countries. China 54% 700 - 800 billion bricks per year, India
11% 14 billion per year, Pakistan 8% 100 billion per year, Bangladesh 4% 50 billion per year.
Brick manufacturing processes are causing significant air pollution , land degradation and river
contamination problems around the world as a result the 4 countries mentioned above have some
of the most polluted cities in the world according to the World Health Organization.

11. These types of pollination is having a dramatic effect on the health of the world's population,
especially in Asian countries which have the most densely populated continent in the world with
over 60% of the world's population.
Governments are now starting to impose strict restrictions on the amount of kiln fired bricks that
can be used within construction projects , therefore construction companies are seeking
alternative Eco friendly ways to complete their projects. These pollutions and health issues are
creating a dramatic strain on many countries health and medical services as well as reduces a
countries ability to utilize its land and waterways efficiently which are needed to grow crops to
feed its people.
Governments are faced with the problem of finding a balance between the construction sector
which is the backbone for development as in many developing countries the annual growth rate
in construction is often considerably higher than the growth of population and gross domestic
product.

12. To combat this issue governments are now offering incentives for companies to both developed
and use alternative building materials and systems that can reduce the negative effects that the
worlds brick manufacturing industries has on its long term economy and environment.
Solution :
Universal Building Solutions advanced construction system developments in building
technology provides environmental cost saving benefits such as .......
1) Reducing construction build times by up to 70%. (this in turn reduces not only the cost of the
building, it also reduces the amount of energy drained from our overworked power grids)
2) Reduces the amount of concrete and reinforcing steel used within a buildings construction,
without effecting its structural integrity. (cement, concrete and steel use incredible amounts of
energy during their manufacture process, these processes contribute large volumes of carbon
emissions being released into the atmosphere, degradation of land as well as pollution to our
water systems)
3) Reduces the need for kiln fired bricks (the brick manufacturing industry is one of the major
contributors to carbon emissions and degradation of land as well as pollution to our water
systems)
4) Homes or buildings constructed using UBS building materials are well insulated (the high
thermal qualities of our products provide energy efficient buildings reducing heating and cooling
costs by as much as 80% reducing energy usage)
In today's changing world building environmentally friendly energy efficient buildings and
housing has become a must. However in most circumstances this requirement has increased
construction cost by up to 20% without addressing the cost of these traditional construction
materials and methods to our environment.
UBS Advanced Technologies is in the unique market position to address all the issues in relation
to energy efficiency, Eco friendly construction systems that drastically reduce the carbon
footprint on the environment while still delivering structurally stronger buildings and reducing
construction costs by 30 to 50%.

13. Our total building material manufacturing system is relatively inexpensive to set up and can
return high profits within it first year of operation. The technology is extremely easy to master
from the manufacturing of the products right through to its ease of construction.
UBS Technology and License Plant Packages
US$1.2 million (One million two hundred thousand US dollars) is sought in return for a License
to manufacture Universal Building Solutions Eco friendly construction materials, utilize its
advanced building system method and technologies, which forms the intellectual property of the
enterprise. (Integrated Building System - IBS) Licensee will have the right to manufacture and
distribute UBS products and utilize our IBS construction systems within a specific territory.
(defined within the License agreement)
Manufactures License Details
1) An annual license fee of US$300,000 will be paid to UBS Advanced Technology.
2) UBS Advanced Technology will supply to licensees the specially designed machinery that
manufactures our construction materials , as a part of the package to purchase the system.
3) All the raw materials and our premixed coating materials will be purchased from UBS
Advanced Technology to ensure the quality of the products manufactured. (Condition of contract
and License agreement)
4) UBS will charge a royalty per square meter on all products manufactured by licensee that are
utilizing our technology.
5) All licensees will trade under the same name and use the company logo to promote
International recognition of the brand and its technology, ie: Universal Building Solutions
Australia (Master License - Country) Universal Building Solutions Perth (Sub License -
territory)
Based on conservative projections licensees have the potential to make substantial returns on
their investment within the first 12 months of operation. (financial assumptions available upon
request)
Our technology has been developed for a growth industry "environmentally friendly
construction materials and advanced construction method”(see growth market details) We
believe the environmentally friendly, energy efficient and cost saving construction material
industry to be a relatively low risk, growth industry worldwide with a rapidly growing demand.

14. Cost of machinery , Intellectual Property (IP) and initial License fee :
The machinery package for the licensee consists of -
1) EPS Production Line (EPS - expanded polystyrene)
2) XPS Production Line (XPS - extruded polystyrene)
3) Coating Production line (MgO and cement coating mixtures can be used within the plant)
4) EPS Recycling system
5) Hot Wire Cutting systems (cuts EPS and XPS)
6) EPS & XPS Material preparation machine
7) Systems Intellectual property and IBS method of construction
8) 1st years licensing fee
Total required is US$1,200,000.00 (ONE MILLION TWO HUNDRED THOUSAND USD only)
Delivery Time of Machinery:
100 days after receipt of scheduled payments and completion of the Licensing agreements.
(payment schedule provided during due diligence and negotiation period)
Technical Service and additional costs that need to be allowed for :
This information does not include the costs for -
a) Freight and carriage charges to the buyers factory location.
b) Insurance costs.
c) The cost of additional pipe & valves, switch & wire that may be required at the buyers factory
location.
d) Any additional work site construction costs or modifications to the buyers factory.
2) After the contract is signed, the buyer will instruct the seller all relative detailed requirements
of the base, water and electrical installation instruction, and so forth within the factory by
supplying detailed drawing showing details of the factory layout and services so the seller may
then supply related installation drawings and parameters for the machinery installation.
3) The seller should immediately dispatch technical personnel to the Buyer’s factory to instruct /
oversee the installation and commissioning of the machinery once all the plant arrives at the
Buyer’s factory Location. Only when the Buyer has confirmation the preparation of the factory
site is completed.
4) The Buyer will bear the expense of international round-trip tickets, lodging and boarding,
transport to and from the work site for all supervising technicians.
5) A subsidy for persons dispatched by the Seller during the installation and commissioning
should be transferred by T/T before the dispatching of persons under the standard fee of
US$120.00 per calendar day per person.

15. 6) The quality of above mentioned machinery and products meet the relative standard of
P.R.CHINA.
7) The warranty period is for 12 months from the date commissioning is finished, any damage
caused by, incorrect usage, failure to service, clean or maintain the machinery correctly is not
covered by the manufactures warranty.
Note :
The above additional costs will need to be meet by the buyer as no allowance has been given for
these cost in the initial price quoted.
Products :
UBS has developed its manufacturing system to produce a wide range of building materials
from the one fully adjustable and versatile plant.
1) Wall block and panel systems (many sizes and configurations)
2) Fence panels – including LED lighting where required (panels only 40mm thick)
3) Flooring panels – suspended slab integrated form work where the underside becomes the
ceiling of the room below. (many sizes and configurations)
4) Roofing panels - that can become the ceiling of the room below. (many sizes and
configurations)
5) Columns and Beams - sizes as required (many sizes and configurations)
6) Under slab pod system – which reduce the amount of concrete used. (many sizes and
configurations)
7) MgO wall board and MgO structural flooring boards (many sizes and configurations)
A number of additional products can be manufactured from this versatile plant if required, for
example:
1) Interior wall insulation (various types XPS & EPS insulation panels)
2) Roofing insulation (various types XPS & EPS insulation panels)
3) Foundation insulation (various types XPS & EPS insulation panels)

16. Total versatility and flexibility with simple adjustments to the machines :
Universal Building Solutions concept of replacing bricks and other materials used within the
construction Industries with a Eco friendly Low carbon producing alternative. Development of
machinery and systems is completed and ready to License, it is estimated a licensees business
can be cash positive returning all capital expenditure within a one year period.
Machinery used to manufacture Universal Building Solutions materials are from the principals
own designs and need to be manufactured to UBS specific design specification. Universal
Building Solutions Advanced Technology is in a strong position to extend their developments
worldwide through a series of licensing agreements, sales of its own purpose designed
manufacturing machinery, innovative Eco friendly building materials and specifically formulated
coating mixtures.
Future developments
Integrated Building Systems IBS are the only way forward if construction and building
companies wish to stay competitive , these new innovative building systems and materials have
technology to increase a company's profitability without increasing costs. The facts are these
new technologies as explained within this document can dramatically reduce constructions cost
by up to 50% without affecting profitability should be an indication for the need to change the
way construction is done in the future .
UBS constantly researches new ideas and technologies on offered within the construction
industry in order to continually develop , improve and refine our own construction technology.
New developments that particularly interest UBS is the high strength structural lightweight
concretes, Cellular Concrete, and Geo - Polymer Aerated Cellular Cements. By combining these
technologies with the UBS system we believe our technology can be enhanced even further, simply
by improving the structural skeleton of our building system with these new lightweight structurally
stronger thermal resistant concrete mixtures.

17. Combining these vastly improved lightweight thermal concrete materials with our system can
only improve the construction process and buildings performance.
Opportunity
The need for new innovative solutions within the construction industry is required in every
country throughout the world. With ever increasing labor costs, escalating cost of raw materials,
construction affordability at crises point new systems and technology like the one UBS has to
offer are sure to be in high demand.
UBS intention is to develop its business into a Global enterprise by utilizing a manufactures
licensing structure not unlike a franchise. We have developed a total package plan which
includes all the machinery and technology necessary to manufacture our innovative building
products. We will supply full details and training regarding the operational processes of our plant
and equipment and ensure licensees understand how to use our Integrated Building System.
The opportunity offered here is to attract the right partners to become involved with the company
at the grass roots level. We believe our products to be superior in all aspects to any other product
available on the market at present. A simple comparisons with existing products marketed today
will demonstrate our superiority and price competitiveness.
We are looking for an Investment Partner to fund UBS Global expansion, by purchasing Equity
in the Technology for its development worldwide. It's our intention to develop the business
utilizing a number of marketing strategies and business models developed.
 (A) Licensing the technology to Corporations via a Master License (Country) or Sub
license (Territory) agreements which will be operated on a similar bases as a franchise
system. (full details regarding this business model are contained within our business
plan)
 (B) Establish and operate Corporate owned factories which will manufacture and supply
materials to building supply outlets, Construction / Building companies and direct to the
General Public. One of the main function for these corporate owned Factories will be to
supply materials to a company owned and controlled by the UBS Group. As explained in
our business model it's our intention to build turnkey Spec Homes and Light
Commercial buildings which will enable our Group to take advantage of the extreme
high cost of housing and commercial property construction in many developed markets
such as Australia, America, New Zealand Canada and the United Kingdom. UBS intends
to offer these Spec buildings with a far superior finish at a reduced market value (to
insure speedy sales) however due to the greatly reduced construction costs of Building
with the UBS system it's our intention to make large profits for our group on each sale.
(full details regarding this business model are contained within our business plan)

18. The cost of construction is at an all time high, additional information regarding how UBS and its
Integrated Building System can help change the way construction is done in 2015 and beyond
use the links listed below.
 https://www.linkedin.com/pulse/we-need-change-how-build-darryl-james-heffernan?trk=mp-
author-card
 https://www.linkedin.com/pulse/move-out-your-comfort-zone-darryl-james-heffernan?trk=mp-
author-card
 https://www.linkedin.com/pulse/build-smart-darryl-james-heffernan?trk=mp-author-card
 https://www.linkedin.com/pulse/save-loads-money-diy-do-yourself-home-improvements-
heffernan?trk=mp-author-card
 https://www.linkedin.com/pulse/technology-available-where-entrepreneurs-darryl-james-
heffernan?trk=mp-author-card
 https://www.linkedin.com/pulse/20141121230214-56723220-pollution-and-the-world-we-live-
in?trk=mp-author-card
 https://www.linkedin.com/pulse/20141114231658-56723220-reduce-build-times-by-up-to-70-
using-unskilled-workers-g?trk=mp-author-card
 https://www.linkedin.com/pulse/20141115221651-56723220-wall-system?trk=mp-author-card
For comprehensive details regarding the opportunities available please contact
Darryl James Heffernan
Owner : Universal Building Solutions
Phone : +84 944536599 (Vietnam)
Email : darrylheffernan@ymail.com
Email : darrylheffernan@hotmail.com
SKYPE : darryl_heffernan
LinkedIn: Profile
http://darryl-james-heffernan.strikingly.com/