turbulent flow (2)
•Download as PPTX, PDF•
0 likes•44 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Report
Share
Report
Share
Recommended
Dcs
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. It specifies the monthly rental rate of $1,000 due on the 1st of each month, the security deposit of $500, and responsibilities of landlord and tenant for repairs and maintenance. The initial lease term is one year beginning January 1st and either party must give 30 days' notice if they do not wish to renew the agreement.
Cements
Portland cement is produced by heating limestone and clay in a kiln to form clinker, which is then ground with gypsum. It gets its strength from chemical reactions when mixed with water called hydration. The main compounds in cement are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite. When water is added, these compounds hydrate and harden to bind the cement over time. The grade of cement corresponds to its minimum compressive strength after specific time periods of curing.
Admixtures
Concrete admixtures are added ingredients beyond cement, water, and aggregates that are used to modify the properties of fresh and hardened concrete. The main types of admixtures are air entrainers, water reducers, set retarders, set accelerators, and plasticizers. Air entrainers add microscopic air bubbles that increase durability in freezing environments. Water reducers allow a reduction in water while maintaining workability, increasing strength. Set retarders delay setting for hot weather, while set accelerators increase early strength for cold weather. Plasticizers make low-slump concrete flowable. Admixtures are selected and dosed to achieve specific concrete properties for construction needs.
Dcs assignment
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the lease of an apartment located at 123 Main St from January 1, 2023 through December 31, 2023. The tenant agrees to pay $1000 per month in rent and a $500 security deposit. The landlord and tenant agree to abide by their respective responsibilities regarding maintenance and repairs as outlined in the agreement.
Cements
Portland cement is produced by heating limestone, clay, sand and iron ore in a kiln to form clinker, which is then ground with gypsum. It gains strength through hydration reactions with water. The main compounds in cement are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite. These compounds hydrate at different rates and contribute to cement's initial set, early strength gain, and long-term strength. Hydration forms calcium silicate hydrates, calcium hydroxide, and fills pores in hardened cement paste. Grades 43 and 53 cement correspond to average compressive strengths of 43 and 53 MPa after 28 days.
Admixtures
Admixtures are ingredients added to concrete other than cement, water, and aggregates. They are used to modify the properties of fresh and hardened concrete. The main types of admixtures are air entrainers, water reducers, set retarders, set accelerators, and superplasticizers. Air entrainers improve freeze-thaw resistance by adding tiny air bubbles. Water reducers decrease the water amount needed while maintaining workability. Set retarders and accelerators adjust the setting time. Superplasticizers create highly flowable, low-water concrete. Admixtures must be properly dosed and mixed to effectively achieve their intended purposes.
Geotectnical ssignment
The document outlines the key steps and requirements to apply for a passport in the United States, including completing an application, providing identification documents, paying applicable fees, and submitting materials in person or by mail. Applicants must be U.S. citizens or nationals and passports are generally processed within 6-8 weeks though expedited service is available for faster processing.
Geomatics engg
This document outlines the key details of a home sale located at 123 Main St from the seller John Doe to the buyer Jane Smith. The three bedroom, two bathroom home was sold for $250,000 with the transaction closing on February 15th, 2023. Both the buyer and seller signed the contract agreeing to the terms of the sale.
Recommended
Dcs
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. It specifies the monthly rental rate of $1,000 due on the 1st of each month, the security deposit of $500, and responsibilities of landlord and tenant for repairs and maintenance. The initial lease term is one year beginning January 1st and either party must give 30 days' notice if they do not wish to renew the agreement.
Cements
Portland cement is produced by heating limestone and clay in a kiln to form clinker, which is then ground with gypsum. It gets its strength from chemical reactions when mixed with water called hydration. The main compounds in cement are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite. When water is added, these compounds hydrate and harden to bind the cement over time. The grade of cement corresponds to its minimum compressive strength after specific time periods of curing.
Admixtures
Concrete admixtures are added ingredients beyond cement, water, and aggregates that are used to modify the properties of fresh and hardened concrete. The main types of admixtures are air entrainers, water reducers, set retarders, set accelerators, and plasticizers. Air entrainers add microscopic air bubbles that increase durability in freezing environments. Water reducers allow a reduction in water while maintaining workability, increasing strength. Set retarders delay setting for hot weather, while set accelerators increase early strength for cold weather. Plasticizers make low-slump concrete flowable. Admixtures are selected and dosed to achieve specific concrete properties for construction needs.
Dcs assignment
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the lease of an apartment located at 123 Main St from January 1, 2023 through December 31, 2023. The tenant agrees to pay $1000 per month in rent and a $500 security deposit. The landlord and tenant agree to abide by their respective responsibilities regarding maintenance and repairs as outlined in the agreement.
Cements
Portland cement is produced by heating limestone, clay, sand and iron ore in a kiln to form clinker, which is then ground with gypsum. It gains strength through hydration reactions with water. The main compounds in cement are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium aluminoferrite. These compounds hydrate at different rates and contribute to cement's initial set, early strength gain, and long-term strength. Hydration forms calcium silicate hydrates, calcium hydroxide, and fills pores in hardened cement paste. Grades 43 and 53 cement correspond to average compressive strengths of 43 and 53 MPa after 28 days.
Admixtures
Admixtures are ingredients added to concrete other than cement, water, and aggregates. They are used to modify the properties of fresh and hardened concrete. The main types of admixtures are air entrainers, water reducers, set retarders, set accelerators, and superplasticizers. Air entrainers improve freeze-thaw resistance by adding tiny air bubbles. Water reducers decrease the water amount needed while maintaining workability. Set retarders and accelerators adjust the setting time. Superplasticizers create highly flowable, low-water concrete. Admixtures must be properly dosed and mixed to effectively achieve their intended purposes.
Geotectnical ssignment
The document outlines the key steps and requirements to apply for a passport in the United States, including completing an application, providing identification documents, paying applicable fees, and submitting materials in person or by mail. Applicants must be U.S. citizens or nationals and passports are generally processed within 6-8 weeks though expedited service is available for faster processing.
Geomatics engg
This document outlines the key details of a home sale located at 123 Main St from the seller John Doe to the buyer Jane Smith. The three bedroom, two bathroom home was sold for $250,000 with the transaction closing on February 15th, 2023. Both the buyer and seller signed the contract agreeing to the terms of the sale.
Geomatic notes
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the lease of an apartment located at 123 Main St from January 1, 2023 through December 31, 2023. Key details include the monthly rent amount, late fees, repairs and maintenance responsibilities, entry rules, and terms for lease renewal or termination.
06 e-flightplanning
Flight planning for aerial photogrammetry projects involves determining the optimal camera positions and image scale to efficiently cover the region of interest at the desired accuracy. Key parameters include image overlap, ground control point pattern, and block size. Larger overlaps and more observations per point improve accuracy. Modern projects use 80% along-track and 60% cross-track overlaps, providing 10-15 observations per point. With GPS support, ground control points are mainly needed at block boundaries for registration and camera calibration. Empirical formulas can estimate planimetric and height accuracies from image scale and ground sample distance.
Cmwm (1)
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. It specifies the monthly rental rate of $1,000 due on the 1st of each month, the security deposit of $1,000, and the lease term of 1 year beginning January 1st, 2023. The landlord and tenant responsibilities for repairs and maintenance are also defined.
Introductionto projectmanagement
The document provides an introduction to project management. It defines what a project is as a unique set of coordinated activities with start and finish dates undertaken to achieve objectives within set constraints. It also defines project management as the art of organizing, leading, reporting on and completing a project through people. Finally, it discusses key aspects of project management including work breakdown structures, planning, parameters such as scope, time and cost.
Cmwm
The document is a scanned copy of a contract for the sale of real estate. It outlines the terms of sale for a residential property located in California, including the purchase price, down payment, financing terms, contingencies, and other standard clauses. The buyer and seller signatures indicate they have agreed to the terms laid out in the contract.
Introductionto projectmanagement
The document provides an introduction to project management. It defines what a project is as a unique set of coordinated activities with start and finish dates undertaken to achieve objectives within set constraints. It then defines project management as the art of organizing, leading, reporting on, and completing a project through people. Finally, it outlines some key characteristics and parameters of projects, including that they have a defined scope, time constraints, cost constraints, and focus on achieving a specific goal.
Gradually varied flow
This document contains technical specifications for an object. It lists the chapter as 6 and provides measurements of 1.5 meters and 4.5 meters, likely for dimensions of the object as there is no other context provided.
boundary layer analysis (1)
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Strength of materials
This document provides an overview of course materials for online courses in Strength of Materials and Structural Analysis II. It lists learning modules, lectures, and links to course content covering topics such as stress and strain, deformation, transformation of stresses and strains, bending, shear and bending moments, deflection, columns, torsion, and more. The content is provided through video lectures and other materials on the National Programme on Technology Enhanced Learning website.
Som
The document appears to be a scanned collection of pages from a book or manual. It contains images of many pages with text and diagrams but no clear overall context or narrative to summarize. The pages discuss various topics including electrical components, wiring diagrams, and technical specifications but without any clear overall purpose or goal stated.
Roofs
The document discusses different types of roofs including pitched, flat, and curved roofs. Pitched roofs are further divided into types like shed, gable, hipped, and gambrel roofs. The document also covers important technical terms related to roofs like ridge, eaves, rafters, purlins, and describes different truss systems used in roofs like king post and queen post trusses. Steel trusses are also introduced which are more economical and easy to construct compared to timber trusses for large spans.
Plastering and pointing
The document discusses plastering and pointing techniques. Plastering involves applying a thin coat of mortar to walls and surfaces to make them smooth. Three types of mortar are described for plastering - lime, cement, and lime-cement mixes. The process of plastering involves preparing the surface, applying coats of mortar such as rendering and floating coats, and finishing. Pointing involves filling mortar joints between masonry units. Different types of pointing styles are outlined such as flush, recessed, and tuck pointing. Common defects in plaster like cracking and remedies are also mentioned.
Streams and Floods
Streams erode, transport, and deposit sediment as they flow downhill. Their patterns are controlled by geology and climate. Meandering streams form point bars on inside bends as faster flow on outsides erodes the banks. During floods, sediment is deposited in floodplains and deltas form where streams enter standing water. Over geological time, streams deepen valleys and widen them through lateral erosion.
Weathering and Erosion
Weathering breaks down rocks and minerals near Earth's surface through mechanical and chemical processes. Mechanical weathering causes physical breakdown without composition change through frost wedging, thermal expansion/contraction, and abrasion by various agents. Chemical weathering alters mineral composition through dissolving, oxidation, and hydrolysis. Erosion transports weathered materials by water, wind, ice, and gravity, depositing sediments that form layers over time.
Walls
Walls serve several functions including enclosing spaces, providing privacy and security, and supporting floors and roofs. They are categorized as either load-bearing walls, which support structural loads, or non-load bearing walls, which only support their own weight. Different types of walls include external walls, internal walls, partition walls, party walls, separating walls, and curtain walls. Load-bearing walls can be constructed of solid masonry, have a cavity, or be faced or veneered.
Paints
Paint is a coating of fluid materials that is applied over surfaces to provide protection and decoration. It consists of a base, vehicle or carrier, driers, coloring pigments, and solvents or thinners. The base forms the bulk of the paint and provides an opaque coating, while the vehicle holds the ingredients in liquid suspension. Drier helps the paint dry and harden. Common types of paint include aluminum paint, anticorrosive paint, asbestos paint, bituminous paint, cellulose paint, colloidal paint, emulsion paint, enamel paint, graphite paint, oil paint, plastic paints, cement paint, and synthetic rubber paint. Each type has different characteristics and uses. Defects in painting
Lect10 chap12 climate
Glaciers are large, long-lasting masses of ice that form on land and move downhill due to gravity. They are part of Earth's hydrosphere and contain about 75% of the fresh water on the planet. Glaciers erode the underlying rock surface through plucking and abrasion, creating characteristic U-shaped valleys and other erosional landscapes. As they move, glaciers also deposit unsorted sediment in the form of moraines, till, and outwash plains.
Glass
Glass is a mixture of metallic silicates, usually containing an alkali metal. It has no definite crystalline structure, absorbs, refracts, or transmits light, and becomes softer as its temperature increases. The main types of glass are soda lime glass, which is cheap and used for windows and containers; potash-lime glass, which fuses at high temperatures; and potash-lead glass, which has a high refractive power and is used for lenses and prisms. Each type has different chemical properties and melting temperatures depending on its composition and intended uses.
Paints (1)
Paint is a coating of fluid materials that is applied to surfaces to protect and decorate them. An ideal paint should dry quickly, maintain its color over time, form a hard durable surface, and not negatively impact health or show cracks. There are many types of paints including aluminum paint, which is resistant to heat and moisture; anticorrosive paint, which protects surfaces for long durations; and enamel paint, which forms a hard surface resistant to chemicals and weathering. Defects in painted surfaces can include blistering, fading, flaking, and running caused by issues like trapped vapors, sunlight, poor adhesion, or an overly smooth surface.
Foundation
Foundations transmit loads from buildings to the ground below. There are different types including shallow foundations like spread footings and deep foundations like piles. Spread footings support individual columns on isolated slabs while combined footings link two columns. Strap footings connect isolated footings with a beam. Mat foundations are large slabs supporting many columns. Pile foundations transfer loads to deeper soils through friction or bearing. Foundations can fail due to unequal settlement, subsoil moisture movement, lateral pressures, or weathering effects. Proper design and construction seeks to prevent these failures.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.More Related Content
More from Rehmat Kaur
Geomatic notes
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the lease of an apartment located at 123 Main St from January 1, 2023 through December 31, 2023. Key details include the monthly rent amount, late fees, repairs and maintenance responsibilities, entry rules, and terms for lease renewal or termination.
06 e-flightplanning
Flight planning for aerial photogrammetry projects involves determining the optimal camera positions and image scale to efficiently cover the region of interest at the desired accuracy. Key parameters include image overlap, ground control point pattern, and block size. Larger overlaps and more observations per point improve accuracy. Modern projects use 80% along-track and 60% cross-track overlaps, providing 10-15 observations per point. With GPS support, ground control points are mainly needed at block boundaries for registration and camera calibration. Empirical formulas can estimate planimetric and height accuracies from image scale and ground sample distance.
Cmwm (1)
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. It specifies the monthly rental rate of $1,000 due on the 1st of each month, the security deposit of $1,000, and the lease term of 1 year beginning January 1st, 2023. The landlord and tenant responsibilities for repairs and maintenance are also defined.
Introductionto projectmanagement
The document provides an introduction to project management. It defines what a project is as a unique set of coordinated activities with start and finish dates undertaken to achieve objectives within set constraints. It also defines project management as the art of organizing, leading, reporting on and completing a project through people. Finally, it discusses key aspects of project management including work breakdown structures, planning, parameters such as scope, time and cost.
Cmwm
The document is a scanned copy of a contract for the sale of real estate. It outlines the terms of sale for a residential property located in California, including the purchase price, down payment, financing terms, contingencies, and other standard clauses. The buyer and seller signatures indicate they have agreed to the terms laid out in the contract.
Introductionto projectmanagement
The document provides an introduction to project management. It defines what a project is as a unique set of coordinated activities with start and finish dates undertaken to achieve objectives within set constraints. It then defines project management as the art of organizing, leading, reporting on, and completing a project through people. Finally, it outlines some key characteristics and parameters of projects, including that they have a defined scope, time constraints, cost constraints, and focus on achieving a specific goal.
Gradually varied flow
This document contains technical specifications for an object. It lists the chapter as 6 and provides measurements of 1.5 meters and 4.5 meters, likely for dimensions of the object as there is no other context provided.
boundary layer analysis (1)
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
Strength of materials
This document provides an overview of course materials for online courses in Strength of Materials and Structural Analysis II. It lists learning modules, lectures, and links to course content covering topics such as stress and strain, deformation, transformation of stresses and strains, bending, shear and bending moments, deflection, columns, torsion, and more. The content is provided through video lectures and other materials on the National Programme on Technology Enhanced Learning website.
Som
The document appears to be a scanned collection of pages from a book or manual. It contains images of many pages with text and diagrams but no clear overall context or narrative to summarize. The pages discuss various topics including electrical components, wiring diagrams, and technical specifications but without any clear overall purpose or goal stated.
Roofs
The document discusses different types of roofs including pitched, flat, and curved roofs. Pitched roofs are further divided into types like shed, gable, hipped, and gambrel roofs. The document also covers important technical terms related to roofs like ridge, eaves, rafters, purlins, and describes different truss systems used in roofs like king post and queen post trusses. Steel trusses are also introduced which are more economical and easy to construct compared to timber trusses for large spans.
Plastering and pointing
The document discusses plastering and pointing techniques. Plastering involves applying a thin coat of mortar to walls and surfaces to make them smooth. Three types of mortar are described for plastering - lime, cement, and lime-cement mixes. The process of plastering involves preparing the surface, applying coats of mortar such as rendering and floating coats, and finishing. Pointing involves filling mortar joints between masonry units. Different types of pointing styles are outlined such as flush, recessed, and tuck pointing. Common defects in plaster like cracking and remedies are also mentioned.
Streams and Floods
Streams erode, transport, and deposit sediment as they flow downhill. Their patterns are controlled by geology and climate. Meandering streams form point bars on inside bends as faster flow on outsides erodes the banks. During floods, sediment is deposited in floodplains and deltas form where streams enter standing water. Over geological time, streams deepen valleys and widen them through lateral erosion.
Weathering and Erosion
Weathering breaks down rocks and minerals near Earth's surface through mechanical and chemical processes. Mechanical weathering causes physical breakdown without composition change through frost wedging, thermal expansion/contraction, and abrasion by various agents. Chemical weathering alters mineral composition through dissolving, oxidation, and hydrolysis. Erosion transports weathered materials by water, wind, ice, and gravity, depositing sediments that form layers over time.
Walls
Walls serve several functions including enclosing spaces, providing privacy and security, and supporting floors and roofs. They are categorized as either load-bearing walls, which support structural loads, or non-load bearing walls, which only support their own weight. Different types of walls include external walls, internal walls, partition walls, party walls, separating walls, and curtain walls. Load-bearing walls can be constructed of solid masonry, have a cavity, or be faced or veneered.
Paints
Paint is a coating of fluid materials that is applied over surfaces to provide protection and decoration. It consists of a base, vehicle or carrier, driers, coloring pigments, and solvents or thinners. The base forms the bulk of the paint and provides an opaque coating, while the vehicle holds the ingredients in liquid suspension. Drier helps the paint dry and harden. Common types of paint include aluminum paint, anticorrosive paint, asbestos paint, bituminous paint, cellulose paint, colloidal paint, emulsion paint, enamel paint, graphite paint, oil paint, plastic paints, cement paint, and synthetic rubber paint. Each type has different characteristics and uses. Defects in painting
Lect10 chap12 climate
Glaciers are large, long-lasting masses of ice that form on land and move downhill due to gravity. They are part of Earth's hydrosphere and contain about 75% of the fresh water on the planet. Glaciers erode the underlying rock surface through plucking and abrasion, creating characteristic U-shaped valleys and other erosional landscapes. As they move, glaciers also deposit unsorted sediment in the form of moraines, till, and outwash plains.
Glass
Glass is a mixture of metallic silicates, usually containing an alkali metal. It has no definite crystalline structure, absorbs, refracts, or transmits light, and becomes softer as its temperature increases. The main types of glass are soda lime glass, which is cheap and used for windows and containers; potash-lime glass, which fuses at high temperatures; and potash-lead glass, which has a high refractive power and is used for lenses and prisms. Each type has different chemical properties and melting temperatures depending on its composition and intended uses.
Paints (1)
Paint is a coating of fluid materials that is applied to surfaces to protect and decorate them. An ideal paint should dry quickly, maintain its color over time, form a hard durable surface, and not negatively impact health or show cracks. There are many types of paints including aluminum paint, which is resistant to heat and moisture; anticorrosive paint, which protects surfaces for long durations; and enamel paint, which forms a hard surface resistant to chemicals and weathering. Defects in painted surfaces can include blistering, fading, flaking, and running caused by issues like trapped vapors, sunlight, poor adhesion, or an overly smooth surface.
Foundation
Foundations transmit loads from buildings to the ground below. There are different types including shallow foundations like spread footings and deep foundations like piles. Spread footings support individual columns on isolated slabs while combined footings link two columns. Strap footings connect isolated footings with a beam. Mat foundations are large slabs supporting many columns. Pile foundations transfer loads to deeper soils through friction or bearing. Foundations can fail due to unequal settlement, subsoil moisture movement, lateral pressures, or weathering effects. Proper design and construction seeks to prevent these failures.
More from Rehmat Kaur (20)
Recently uploaded
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Recently uploaded (20)
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf