The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
This document summarizes the design of an air conditioning system for Al-Zayan Mall in Alexandria, Egypt. The mall has 3 basement floors, 4 floors of retail space, and 6 floors of administrative offices. The design involves calculating the cooling load using the HAP program, selecting appropriate air handling units and fan coil units from manufacturer catalogs based on the load results, and designing ductwork using the equal friction method. Key components of the chilled water system are also described, including water chillers, cooling towers, pumps, and the water distribution system. Duct material, thickness, insulation, installation and testing are discussed.
This document provides information on ventilated roof insulation products called Vent-Top ThermaCalX1 and Vent-Top ThermaCalX2 manufactured by Cornell Corporation. The products combine oriented strand board and extruded polystyrene insulation with a ventilated air space between. They have a high degree of open area for airflow and moisture diffusion. Installation instructions and code compliance information are also included.
High performance Hollow fiber Membrane filters for precise applications. These high quality filters are manufactured in Japan are reliable and ensure satisfactory output. Kindly feel free to contact us for solutions to your typical applications. We can visit and discuss your needs and work out the proposal suiting the application.
MAXIFLO PRO 200 | FLAT ROOF ATTIC VENT
2-wing attic vent constructed of polypropylene and a metal base designed to prolong the life of the roof system by reducing moisture and trapped air pressure within the roof system. This product is to be used on flat roofs.
https://roofingmaterials.online/
We are using the latest technology of flat ceramic membrane filtration for water treatment, suitable for sea water desalination, drinking water, mining water reuse, industrial waste water treatment, which is higher stability, lower operation cost, longer lifetime, easier maintenanc.
This document provides information on various water and wastewater treatment equipment from PPAQUATECH. It includes details on diffused aeration equipment like fine bubble and coarse bubble diffusers. It also describes media options for biological treatment like tube settlers, SAFF media, bio-pack media. Filters mentioned include multi-grade filters, sand filters, and activated carbon filters. The document provides technical specifications and features of the different equipment.
The TURCON® VL SEAL is a single-acting O-ring energized slipper seal that has several advantages over traditional rod seals, including a reduced radial depth allowing for a smaller gland size, tighter leakage control, lower friction from a reduced contact area, and simplicity of design using a standard size O-ring. It features Turcon's Stepseal® 2K back pumping effect and seal geometry that prevents seal roll at low or shuffling pressures. It can operate at pressures up to 5,000 psi with velocities up to 50 ft/s on reciprocating movements from -65°F to +390°F depending on the elastomer material. Standard materials include mineral oil-based hydraulic fluids and others depending
This document summarizes the design of an air conditioning system for Al-Zayan Mall in Alexandria, Egypt. The mall has 3 basement floors, 4 floors of retail space, and 6 floors of administrative offices. The design involves calculating the cooling load using the HAP program, selecting appropriate air handling units and fan coil units from manufacturer catalogs based on the load results, and designing ductwork using the equal friction method. Key components of the chilled water system are also described, including water chillers, cooling towers, pumps, and the water distribution system. Duct material, thickness, insulation, installation and testing are discussed.
This document provides information on ventilated roof insulation products called Vent-Top ThermaCalX1 and Vent-Top ThermaCalX2 manufactured by Cornell Corporation. The products combine oriented strand board and extruded polystyrene insulation with a ventilated air space between. They have a high degree of open area for airflow and moisture diffusion. Installation instructions and code compliance information are also included.
High performance Hollow fiber Membrane filters for precise applications. These high quality filters are manufactured in Japan are reliable and ensure satisfactory output. Kindly feel free to contact us for solutions to your typical applications. We can visit and discuss your needs and work out the proposal suiting the application.
MAXIFLO PRO 200 | FLAT ROOF ATTIC VENT
2-wing attic vent constructed of polypropylene and a metal base designed to prolong the life of the roof system by reducing moisture and trapped air pressure within the roof system. This product is to be used on flat roofs.
https://roofingmaterials.online/
We are using the latest technology of flat ceramic membrane filtration for water treatment, suitable for sea water desalination, drinking water, mining water reuse, industrial waste water treatment, which is higher stability, lower operation cost, longer lifetime, easier maintenanc.
This document provides information on various water and wastewater treatment equipment from PPAQUATECH. It includes details on diffused aeration equipment like fine bubble and coarse bubble diffusers. It also describes media options for biological treatment like tube settlers, SAFF media, bio-pack media. Filters mentioned include multi-grade filters, sand filters, and activated carbon filters. The document provides technical specifications and features of the different equipment.
The document discusses the components and design of air distribution systems in HVAC. It describes the different types of ducts based on shape, pressure, velocity, and materials used. Rectangular, round, and oval ducts are common shapes. Ducts can be high, medium, or low pressure and high or low velocity. Common duct materials include galvanized steel, aluminum, pre-insulated, and fabric. Duct joints include slip joints, drive slips, and flange joints. The document also discusses outlet types like grilles and diffusers, as well as air filters used to remove particles from the air flow. Proper sizing and design of ducts, outlets, and filters are important for effective
The Avenger 33M filter provides high-performance particulate and coalescing filtration for gas sample streams. It uses a disposable filter element to remove solids and liquid droplets, protecting analyzers. The filter ensures 100% liquid removal through a liquid block membrane technology. The 33M is larger than other Avenger filters, making it suitable for higher flow rates or more contaminants. It has a large internal volume and easy installation and maintenance through a uniquely designed housing.
The Xomox® XLD lined butterfly valves have thick PFA or PTFE liners that provide resistance to permeation, extending product life and improving safety. The valves feature low torque operation enabled by an innovative sealing mechanism and bearings, allowing the use of smaller and more economical actuators. The substantial liners, live-loaded stem sealing system, improved disc design, and other features provide integrity, safety and cost advantages for the valves.
1) Cooling towers require careful design consideration of factors like approach, range, avoidance of recirculation, use of variable frequency drives for fan motors, cooling tower basin design, and obtaining high quality components.
2) Key components like the fiberglass reinforced plastic (FRP) structure, fans, fan stacks, air inlet louvers, drift eliminators, and fill must meet specifications and standards to ensure proper performance and longevity of the cooling tower.
3) Cooling tower suppliers should provide documentation and certification to verify their components meet quality standards to deliver the required performance over the tower's lifetime.
The Genie 123 membrane separator offers a 2-inch diameter membrane for removing liquid from gas samples at higher flow rates than the Genie 120. It can protect components like gas analyzers from liquids up to 5,130 cc/min for one membrane type or 13,000 cc/min for another. The Genie 123 is ideal for "on-line" analyzers, gas chromatographs, or mass spectrometers due to its high flow rate capabilities. It has a total internal volume of 10.33 cc and is made of 316 stainless steel materials rated for temperatures up to 185°F or 302°F depending on membrane type.
The document appears to be a bill of materials or parts list for building an oxygen therapy machine. It includes descriptions, part numbers, quantities needed, and pricing for various valves, regulators, fittings, tubing, electrical components, and other miscellaneous parts. The total line price for bundled items is $0. The document provides a detailed list of over 100 individual components required to assemble the machine.
Only for Knowledge purpose, doesn't contains any confidential data's.
Content:
1. What is Duct & Duct design
> Typical illustration of duct work
2.
Ducting Materials
> Galvanized steel
> Aluminium (Al)
> Polyurethane and phenolic insulation
panels (pre insulated air ducts)
> Fiberglass duct board (preinsulated
non metallic ductwork)
> Flexible ducting
> Fabric ducting
> PVC low
profile ducting
> Waterproofing
3. Components of Duct System
> Vibration isolators
> Take
offs
> Stack boots and heads
> Volume control dampers
> Smoke and fire dampers
> Turning vanes
> Plenums
> Terminal units
> Air terminals & Louvers
> Duct joints
4. Air leakage in duct
> Why duct leak test required
> Where Does Duct Leakage Occurs
> Methods to test Duct Leakage
5. Duct sealing
> Duct sealing methods
Duct tape,
Water based sealant, Mastic resin
based sealant, Metallic tapes
6. Duct maintenance
> Methods
Contact vacuuming, Air
sweeping, Power brushing, Sealing of
air leak.
This document discusses integrated domestic water and fire sprinkler systems using ALFAIDRO piping products. It introduces several ALFAIDRO piping systems - ALFAIDRO PPR-CT for domestic water, ALFAIDRO FASER for HVAC systems, ALFAIDRO NOFIRE for fire sprinklers. It provides details on the material properties and approvals of these piping products and compares their benefits to metallic piping systems, such as lower costs, easier installation, and longer service life.
This document provides information on Ecodair Microfilters and moisture separators that provide dry air for machine tools. Ecodair offers 10 standard models of dry air compressors to meet various needs, with features like long life, anti-corrosion coating, and low maintenance. Machine manufacturers prefer Ecodair because it offers important safety features to protect machines from issues caused by dirty air like downtime and product defects. Ecodair dryers remove moisture and contaminants from compressed air to provide clean, dry air required for precise machining.
The document discusses international standards for pre-insulated piping systems used in district cooling networks. It provides an overview of Perma-Pipe, the largest supplier of pre-insulated piping systems in North America and the Middle East. It then discusses key components of pre-insulated piping systems including the HDPE casing, polyurethane foam insulation, corrosion protection, leak detection, and field joint sealing methods.
Best Ceiling cassette Ac, Designed, developed and engineered for Indian conditions, Toshiba SPI Premier delivers the ultimate in cooling comfort, efficiency and sustainability.
This unique product is built with a host of advantages that makes it the clear, premier choice for best-in-class cooling.
JGB Enterprises provides a wide range of Agricultural Hose / Farm Hose / Agricultural Tubing solutions, including bulk hose and custom assemblies. JGB meets the needs of both OEM’s and Fertilizer Equipment Parts Dealers through any of our five stocking warehouses and fabrication facilities. We provide Hose Kits, Boxed lengths and Private Branded hose upon request. JGB carries Agricultural Hoses / Farm Hoses and Assemblies for agriculture and farming: Light Agricultural Spraying, Agriculture Liquid Fertilizers, Irrigation, Air Seeder Lines, and Agricultural Weed Spraying.
The document summarizes the key features of the Eiger DoorTM, an automatic fast-acting freezer door that operates reliably at high speeds. It has a dehumidified air circulation system to eliminate frost and ice buildup on the door and surrounding area. Safety features include photoelectric cells to stop the door if an obstacle is detected and a contact safety edge on the bottom beams to halt and reverse the door if it touches an obstacle. Standard sizes are up to 4 meters wide and 6 meters high.
Pneumatics – Choose the Best Valve for Optimum PerformanceDesign World
Every application has unique requirements and functionality. Choosing the best pneumatic valve for the best performance requires knowing how to select based on specifications. The specifications are based on many factors from the type of valve design to the flow of the flow of the valve. This webinar covers the basic valve designs and the best applications for their design. You will learn when an air piloted valve is used versus a solenoid piloted valve, the difference between direct acting solenoid valves from indirect acting solenoid valves and when they are best applied in a project and how quality of air, size and speed contribute to the valve selection. What is Cv? How do response times and fill and exhaust help with valve specifications? Lastly, you will learn how to determine valve failure issues. Overall, this webinar provides technical and practical ways to properly specify a valve and how to troubleshoot in the event one should fail. You will learn:
Design types features & benefits
Types of actuation
Sizing/Flow rates (speed)
Fail safe
This document provides an overview and specifications for the P6 and P7 professional washer-extractors from Primus.
The P6 has a 60L drum volume and the P7 has a 75L drum volume. Both machines have a ratio of 1/10 and spin at 1150 RPM with a G-factor of 390.
The machines feature a stainless steel cabinet and drum construction for durability. The drum has lifting ribs for mechanical action during the wash cycle. Other specifications covered include the door, controls, water inlet valves, drain pump, bearings, seal, and heating elements.
The EC microprocessor controls 9 preset wash programs that can be customized and stores settings in flash memory. It
This document discusses various parameters that affect the performance of liquid flat plate solar collectors (LFPCs). It describes the typical construction of an LFPC, including a rectangular casing with an absorber plate and tubes to circulate a heat transfer fluid. Key parameters discussed include selective absorber coatings, the number of glass covers, spacing between components, and materials used. The document also examines how geometric factors, insulation, and other variables like working fluid and absorber porosity can impact efficiency. It concludes that major losses occur through the top of collectors and that efficiency can be improved by optimizing design elements to reduce heat loss.
The document provides information about PVC materials used in construction, including their manufacturing process, transportation and storage, market survey results, uses in plumbing, electrical, and construction applications, and advantages over other materials. It details the types of PVC pipes and water tanks used in plumbing. For electrical applications, it lists common items made from PVC like wires and switches, and their typical price ranges. PVC doors and their manufacturing are also described. Brochures and pictures from local shops supplement the information. Advantages of PVC cited are strength, weather resistance, durability, and cost-effectiveness.
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
The document discusses the components and design of air distribution systems in HVAC. It describes the different types of ducts based on shape, pressure, velocity, and materials used. Rectangular, round, and oval ducts are common shapes. Ducts can be high, medium, or low pressure and high or low velocity. Common duct materials include galvanized steel, aluminum, pre-insulated, and fabric. Duct joints include slip joints, drive slips, and flange joints. The document also discusses outlet types like grilles and diffusers, as well as air filters used to remove particles from the air flow. Proper sizing and design of ducts, outlets, and filters are important for effective
The Avenger 33M filter provides high-performance particulate and coalescing filtration for gas sample streams. It uses a disposable filter element to remove solids and liquid droplets, protecting analyzers. The filter ensures 100% liquid removal through a liquid block membrane technology. The 33M is larger than other Avenger filters, making it suitable for higher flow rates or more contaminants. It has a large internal volume and easy installation and maintenance through a uniquely designed housing.
The Xomox® XLD lined butterfly valves have thick PFA or PTFE liners that provide resistance to permeation, extending product life and improving safety. The valves feature low torque operation enabled by an innovative sealing mechanism and bearings, allowing the use of smaller and more economical actuators. The substantial liners, live-loaded stem sealing system, improved disc design, and other features provide integrity, safety and cost advantages for the valves.
1) Cooling towers require careful design consideration of factors like approach, range, avoidance of recirculation, use of variable frequency drives for fan motors, cooling tower basin design, and obtaining high quality components.
2) Key components like the fiberglass reinforced plastic (FRP) structure, fans, fan stacks, air inlet louvers, drift eliminators, and fill must meet specifications and standards to ensure proper performance and longevity of the cooling tower.
3) Cooling tower suppliers should provide documentation and certification to verify their components meet quality standards to deliver the required performance over the tower's lifetime.
The Genie 123 membrane separator offers a 2-inch diameter membrane for removing liquid from gas samples at higher flow rates than the Genie 120. It can protect components like gas analyzers from liquids up to 5,130 cc/min for one membrane type or 13,000 cc/min for another. The Genie 123 is ideal for "on-line" analyzers, gas chromatographs, or mass spectrometers due to its high flow rate capabilities. It has a total internal volume of 10.33 cc and is made of 316 stainless steel materials rated for temperatures up to 185°F or 302°F depending on membrane type.
The document appears to be a bill of materials or parts list for building an oxygen therapy machine. It includes descriptions, part numbers, quantities needed, and pricing for various valves, regulators, fittings, tubing, electrical components, and other miscellaneous parts. The total line price for bundled items is $0. The document provides a detailed list of over 100 individual components required to assemble the machine.
Only for Knowledge purpose, doesn't contains any confidential data's.
Content:
1. What is Duct & Duct design
> Typical illustration of duct work
2.
Ducting Materials
> Galvanized steel
> Aluminium (Al)
> Polyurethane and phenolic insulation
panels (pre insulated air ducts)
> Fiberglass duct board (preinsulated
non metallic ductwork)
> Flexible ducting
> Fabric ducting
> PVC low
profile ducting
> Waterproofing
3. Components of Duct System
> Vibration isolators
> Take
offs
> Stack boots and heads
> Volume control dampers
> Smoke and fire dampers
> Turning vanes
> Plenums
> Terminal units
> Air terminals & Louvers
> Duct joints
4. Air leakage in duct
> Why duct leak test required
> Where Does Duct Leakage Occurs
> Methods to test Duct Leakage
5. Duct sealing
> Duct sealing methods
Duct tape,
Water based sealant, Mastic resin
based sealant, Metallic tapes
6. Duct maintenance
> Methods
Contact vacuuming, Air
sweeping, Power brushing, Sealing of
air leak.
This document discusses integrated domestic water and fire sprinkler systems using ALFAIDRO piping products. It introduces several ALFAIDRO piping systems - ALFAIDRO PPR-CT for domestic water, ALFAIDRO FASER for HVAC systems, ALFAIDRO NOFIRE for fire sprinklers. It provides details on the material properties and approvals of these piping products and compares their benefits to metallic piping systems, such as lower costs, easier installation, and longer service life.
This document provides information on Ecodair Microfilters and moisture separators that provide dry air for machine tools. Ecodair offers 10 standard models of dry air compressors to meet various needs, with features like long life, anti-corrosion coating, and low maintenance. Machine manufacturers prefer Ecodair because it offers important safety features to protect machines from issues caused by dirty air like downtime and product defects. Ecodair dryers remove moisture and contaminants from compressed air to provide clean, dry air required for precise machining.
The document discusses international standards for pre-insulated piping systems used in district cooling networks. It provides an overview of Perma-Pipe, the largest supplier of pre-insulated piping systems in North America and the Middle East. It then discusses key components of pre-insulated piping systems including the HDPE casing, polyurethane foam insulation, corrosion protection, leak detection, and field joint sealing methods.
Best Ceiling cassette Ac, Designed, developed and engineered for Indian conditions, Toshiba SPI Premier delivers the ultimate in cooling comfort, efficiency and sustainability.
This unique product is built with a host of advantages that makes it the clear, premier choice for best-in-class cooling.
JGB Enterprises provides a wide range of Agricultural Hose / Farm Hose / Agricultural Tubing solutions, including bulk hose and custom assemblies. JGB meets the needs of both OEM’s and Fertilizer Equipment Parts Dealers through any of our five stocking warehouses and fabrication facilities. We provide Hose Kits, Boxed lengths and Private Branded hose upon request. JGB carries Agricultural Hoses / Farm Hoses and Assemblies for agriculture and farming: Light Agricultural Spraying, Agriculture Liquid Fertilizers, Irrigation, Air Seeder Lines, and Agricultural Weed Spraying.
The document summarizes the key features of the Eiger DoorTM, an automatic fast-acting freezer door that operates reliably at high speeds. It has a dehumidified air circulation system to eliminate frost and ice buildup on the door and surrounding area. Safety features include photoelectric cells to stop the door if an obstacle is detected and a contact safety edge on the bottom beams to halt and reverse the door if it touches an obstacle. Standard sizes are up to 4 meters wide and 6 meters high.
Pneumatics – Choose the Best Valve for Optimum PerformanceDesign World
Every application has unique requirements and functionality. Choosing the best pneumatic valve for the best performance requires knowing how to select based on specifications. The specifications are based on many factors from the type of valve design to the flow of the flow of the valve. This webinar covers the basic valve designs and the best applications for their design. You will learn when an air piloted valve is used versus a solenoid piloted valve, the difference between direct acting solenoid valves from indirect acting solenoid valves and when they are best applied in a project and how quality of air, size and speed contribute to the valve selection. What is Cv? How do response times and fill and exhaust help with valve specifications? Lastly, you will learn how to determine valve failure issues. Overall, this webinar provides technical and practical ways to properly specify a valve and how to troubleshoot in the event one should fail. You will learn:
Design types features & benefits
Types of actuation
Sizing/Flow rates (speed)
Fail safe
This document provides an overview and specifications for the P6 and P7 professional washer-extractors from Primus.
The P6 has a 60L drum volume and the P7 has a 75L drum volume. Both machines have a ratio of 1/10 and spin at 1150 RPM with a G-factor of 390.
The machines feature a stainless steel cabinet and drum construction for durability. The drum has lifting ribs for mechanical action during the wash cycle. Other specifications covered include the door, controls, water inlet valves, drain pump, bearings, seal, and heating elements.
The EC microprocessor controls 9 preset wash programs that can be customized and stores settings in flash memory. It
This document discusses various parameters that affect the performance of liquid flat plate solar collectors (LFPCs). It describes the typical construction of an LFPC, including a rectangular casing with an absorber plate and tubes to circulate a heat transfer fluid. Key parameters discussed include selective absorber coatings, the number of glass covers, spacing between components, and materials used. The document also examines how geometric factors, insulation, and other variables like working fluid and absorber porosity can impact efficiency. It concludes that major losses occur through the top of collectors and that efficiency can be improved by optimizing design elements to reduce heat loss.
The document provides information about PVC materials used in construction, including their manufacturing process, transportation and storage, market survey results, uses in plumbing, electrical, and construction applications, and advantages over other materials. It details the types of PVC pipes and water tanks used in plumbing. For electrical applications, it lists common items made from PVC like wires and switches, and their typical price ranges. PVC doors and their manufacturing are also described. Brochures and pictures from local shops supplement the information. Advantages of PVC cited are strength, weather resistance, durability, and cost-effectiveness.
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Easily Verify Compliance and Security with Binance KYCAny kyc Account
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
12. Technical data
Type X-Stream I X-Stream II X-Stream III
10 Pa - m3/h 1600 3200 4800
20 Pa - m3/h 2250 4500 6750
30 Pa - m3/h 2850 5700 8550
Surface - cm2 1100 2200 3300
Width - mm 385 805 1220
Height - mm 355 355 355
Depth - mm 45 45 45
Hole size - mm 392 x 360 812 x 360 1232 x 360
16. Comparison X-Stream – SKOV/BD Inlet
X-Stream air inlet Standard PU-inlet
3 in 1 system 3 in 1 system
U value = 0.93 W/(m2
.K) = 30% better U value = 1.31 W/(m2
.K)
Insulation 100% Insulation 92%
Flange insulated Flange NOT insulated- cold bridge
No leakage of air possible 2 x 3mm = 6 mm leakage of air
2,250 m3
/h - 20 Pa (10% more) 2,050 m3
/h - 20 Pa
In maximum air on animals In maximum air horizontally
Unassembled option Unassembled = no option
96 unassembled per Europallet (48% more) 60 assembled per Europallet
5 year guarantee 1 year guarantee
17. • X-Stream: 2 layers HIPS and
26 mm Neopor 25 gr/l:
U-value 0,93 W/(m2
.K)
• Skov/BD: 2 layers PS and 19
mm EPS 30 gr/l:
U-value : 1,31 W/(m2
.K)
X-Stream 40 % better insulated
18. • X-Stream has good insulation
over complete surface of the
inlet
• Skov/BD in centre only 5 mm
insulation. This (red) part is
cold bridge and there will be
condensation on the inlet,
which will freeze in wintertime
19. • X-Stream flang is very well
insulated with Neopor
• Skov/BD inlet has no
insulation in flang or bottom
part
20. • X-Stream: no leakage of air at
side or bottom because of
special draught strip
• Skov/BD: After opening of inlet
, each side has 3 mm opening
which causes draughts
21. Minimum air flow
•X-Stream: Air flow in minimum
is more horizontal then Skov.
•Most situations no spoiler is
needed with X-Stream
22. Maximum air flow
•X-Stream: In maximum the air
is steered on the animals giving
them maximum cooling
•Skov/BD inlet: not possible to
steer on the animals no cooling.
23. Comparison X-Stream – SKOV/BD Inlet
X-Stream air inlet Standard PU-inlet
3 in 1 system 3 in 1 system
U value = 0.93 W/(m2
.K) = 30% better U value = 1.31 W/(m2
.K)
Insulation 100% Insulation 92%
Flange insulated Flange NOT insulated- cold bridge
No leakage of air possible 2 x 3mm = 6 mm leakage of air
2,250 m3
/h - 20 Pa (10% more) 2,050 m3
/h - 20 Pa
In maximum air on animals In maximum air horizontally
Unassembled option Unassembled = no option
96 unassembled per Europallet (48% more) 60 assembled per Europallet
5 year guarantee 1 year guarantee