Rack Cooling Efficiency Task List - Tripp Lite
•
1 like•409 views
Tripp Lite's easy-to-use check list as you plan your efforts to improve the cooling efficiency of your network environment. Download the white paper: Increase Rack Cooling Efficiency and Solve Heat-Related Problems: bityly.com/RackCoolingWP
Report
Share
Report
Share
Download to read offline
Recommended
Electronic cooling
This document discusses different methods for cooling electronic equipment and components. It begins by introducing the need for cooling due to heat generated by electronic operations. Then it describes calculating cooling loads. Several cooling methods are covered, including conduction through materials like chip carriers and circuit boards. Air cooling using natural convection, forced convection with fans, and radiation are explained. Liquid cooling approaches like indirect cooling systems with cold plates and direct immersion cooling are also outlined. Immersion cooling can provide very high heat transfer rates through nucleate boiling. The document analyzes these cooling techniques and their applications in electronic systems.
Enclosure and process_cooling
Here are the key steps to calculate the heat loss in an enclosure:
1. Determine the total heat loss (V) of all installed components in the enclosure:
- Add up the heat loss of each individual component as specified in the component datasheets.
2. Calculate the heat dissipation via the enclosure surface (S):
- S = k x A x ΔT
Where:
k = heat transfer coefficient of the enclosure material (typically 5.5 W/m2K for sheet steel)
A = surface area of the enclosure
ΔT = temperature difference between inside (Ti) and outside (To) of the enclosure
3. Subtract the surface heat dissipation (S)
Building enclosure design presentation 1
This document provides an overview of an enclosure design training presentation focused on low energy buildings. The presentation covers definitions of key terms, the five critical barriers in enclosure design including the thermal and air barriers, approaches to designing continuous barriers, and details of enclosure assemblies. It emphasizes the importance of continuity, airtightness, insulation, and coordination between building systems in achieving energy efficiency and durability. Case studies are presented on high performance building enclosures and MEP designs.
10 Steps in Telecom Thermal Management
Description
It is quite normal for telecom industry hardware professionals to run into thermal management challenges. Following a structured thermal management methodology can be the difference between a successful product and one that fails to meet customer expectations. Most thermal engineers are adept at fulfilling unit tasks in thermal engineering quite admirably. Establishing and supporting a sequential and consistent approach to performing those tasks will maximize chances for success and ensure predictability in project schedule.
This 30 minute webinar will present a comprehensive overview along with brief introductions to engineering estimation techniques necessary for any telecom thermal management project.
Who Should Attend?: Thermal Engineers, engineering mangers, hardware professionals, and project/product/program managers who are likely to encounter telecom equipment related thermal challenges.
About the Presenter:
Kamal Karimanal is the Founder of Cielution LLC, an Engineering simulation software and services company serving the electronics supply chain (www.cielution.com). Dr. Karimanal has served in several engineering simulation focused roles at IERC, Fluent Inc., ANSYS Inc., Globalfoundries, and Juniper Networks. Dr. Karimanal has contributed to several detailed and compact modeling methodologies which are being widely used by the electronics industry today. He has written several conference and journal papers and online application notes. Dr. Karimanal received his Ph. D in Mechanical Engineering from The University of Texas at Austin.
POWER POINT PRESENTATION ON DATA CENTER
HCL Infosystems hosted an industrial training on data center implementation for Vivek Prajapati. The training covered an introduction to data centers, including their history and requirements for modern facilities. It discussed the physical infrastructure of data centers, including facility layout, mechanical engineering like HVAC systems, and electrical engineering infrastructure like power sources and UPS systems. The training also covered modular data center alternatives that offer scalable capacity in purpose-engineered modules that can be shipped worldwide.
12 Cooling Load Calculations
This document discusses cooling load, which is the thermal energy that must be removed from a space to maintain comfort conditions. It outlines various components that contribute to cooling load, including heat gains from enclosure elements, internal loads, and outdoor air. Key terms are defined, such as cooling load temperature difference (CLTD) and cooling load factor (CLF), which are used to account for time delays in radiation and conduction gains. Methods for calculating cooling loads from walls, roofs, glazing, lighting, people and other internal sources are presented.
Long Term Care Facilities Power Solutions
Solutions for Resident Rooms in Long Term Care Facilities
Tripp Lite solutions include hospital-grade plugs and outlets that meet UL 1449 and UL 1363 standards and are allowed by the CMS waiver.
To view the entire line and for more information: http://www.tripplite.com/applications/hospital-medical-grade-power-strips
Recommended
Electronic cooling
This document discusses different methods for cooling electronic equipment and components. It begins by introducing the need for cooling due to heat generated by electronic operations. Then it describes calculating cooling loads. Several cooling methods are covered, including conduction through materials like chip carriers and circuit boards. Air cooling using natural convection, forced convection with fans, and radiation are explained. Liquid cooling approaches like indirect cooling systems with cold plates and direct immersion cooling are also outlined. Immersion cooling can provide very high heat transfer rates through nucleate boiling. The document analyzes these cooling techniques and their applications in electronic systems.
Enclosure and process_cooling
Here are the key steps to calculate the heat loss in an enclosure:
1. Determine the total heat loss (V) of all installed components in the enclosure:
- Add up the heat loss of each individual component as specified in the component datasheets.
2. Calculate the heat dissipation via the enclosure surface (S):
- S = k x A x ΔT
Where:
k = heat transfer coefficient of the enclosure material (typically 5.5 W/m2K for sheet steel)
A = surface area of the enclosure
ΔT = temperature difference between inside (Ti) and outside (To) of the enclosure
3. Subtract the surface heat dissipation (S)
Building enclosure design presentation 1
This document provides an overview of an enclosure design training presentation focused on low energy buildings. The presentation covers definitions of key terms, the five critical barriers in enclosure design including the thermal and air barriers, approaches to designing continuous barriers, and details of enclosure assemblies. It emphasizes the importance of continuity, airtightness, insulation, and coordination between building systems in achieving energy efficiency and durability. Case studies are presented on high performance building enclosures and MEP designs.
10 Steps in Telecom Thermal Management
Description
It is quite normal for telecom industry hardware professionals to run into thermal management challenges. Following a structured thermal management methodology can be the difference between a successful product and one that fails to meet customer expectations. Most thermal engineers are adept at fulfilling unit tasks in thermal engineering quite admirably. Establishing and supporting a sequential and consistent approach to performing those tasks will maximize chances for success and ensure predictability in project schedule.
This 30 minute webinar will present a comprehensive overview along with brief introductions to engineering estimation techniques necessary for any telecom thermal management project.
Who Should Attend?: Thermal Engineers, engineering mangers, hardware professionals, and project/product/program managers who are likely to encounter telecom equipment related thermal challenges.
About the Presenter:
Kamal Karimanal is the Founder of Cielution LLC, an Engineering simulation software and services company serving the electronics supply chain (www.cielution.com). Dr. Karimanal has served in several engineering simulation focused roles at IERC, Fluent Inc., ANSYS Inc., Globalfoundries, and Juniper Networks. Dr. Karimanal has contributed to several detailed and compact modeling methodologies which are being widely used by the electronics industry today. He has written several conference and journal papers and online application notes. Dr. Karimanal received his Ph. D in Mechanical Engineering from The University of Texas at Austin.
POWER POINT PRESENTATION ON DATA CENTER
HCL Infosystems hosted an industrial training on data center implementation for Vivek Prajapati. The training covered an introduction to data centers, including their history and requirements for modern facilities. It discussed the physical infrastructure of data centers, including facility layout, mechanical engineering like HVAC systems, and electrical engineering infrastructure like power sources and UPS systems. The training also covered modular data center alternatives that offer scalable capacity in purpose-engineered modules that can be shipped worldwide.
12 Cooling Load Calculations
This document discusses cooling load, which is the thermal energy that must be removed from a space to maintain comfort conditions. It outlines various components that contribute to cooling load, including heat gains from enclosure elements, internal loads, and outdoor air. Key terms are defined, such as cooling load temperature difference (CLTD) and cooling load factor (CLF), which are used to account for time delays in radiation and conduction gains. Methods for calculating cooling loads from walls, roofs, glazing, lighting, people and other internal sources are presented.
Long Term Care Facilities Power Solutions
Solutions for Resident Rooms in Long Term Care Facilities
Tripp Lite solutions include hospital-grade plugs and outlets that meet UL 1449 and UL 1363 standards and are allowed by the CMS waiver.
To view the entire line and for more information: http://www.tripplite.com/applications/hospital-medical-grade-power-strips
Charging Stations Protect & Organize Tablets - case study
Tripp Lite's Charging Stations secure and charge tablets at Visitation Catholic School.
More info: http://www.tripplite.com/products/usb-ac-charging~38
Digital Signage Growth by the Numbers
Discover the most effective form of advertising for your business.
How a UPS System Protects Your Equipment
Learn how a Tripp Lite UPS System can protect your equipment.
For more information, go to:
http://www.tripplite.com/products/ups-systems~11
Why You Need a Surge Protector
Learn why having a surge protector is a must. Which one is best for you?
For more information, go to:
http://www.tripplite.com/products/surge-protectors~19
Charging Stations for tablets & Chromebooks by Tripp Lite
Protect the digital classroom with Tripp Lite Charging Stations to secure, charge, organize, and sync tablets and Chromebooks.
For more information, go to: http://www.tripplite.com/products/catalog/plid/62
HDBaseT HDMI Extenders
For more information, go to: http://www.tripplite.com/products/splitters-switches-extenders~8?2112=HDBaseT%20Compliant
VGA Display Solutions with Diagrams
Tripp Lite VGA display solutions with diagrams covering
-- VGA over Cat5 (UTP)
-- VGA + Audio over Cat5 (UTP)
-- VGA + serial over Cat5 (UTP)
View all of Tripp Lite’s VGA solutions here: http://www.tripplite.com/product/VGA/971
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite
The document summarizes Tripp Lite's new high-density fiber patch panels, which offer modular cassette options for scalability and density. The panels support various fiber protocols and applications in telecom and data centers. They can accommodate up to 14 modules in just 2U of rack space and have unique front- or rear-facing mounting options.
Cut Off Vampire Appliances' Phantom Loads with Tripp Lite
Phantom power is costing you up to $200 per year! Cut power to electronics that are sucking you dry. Items like computers, media players, cell phone chargers and lamps may be in the off position, but they're still using electricity while plugged in. With Tripp Lite's ECO-Surge Protectors and ECO-UPS Systems, you can banish phantom loads with power save outlets.
What other pieces in your house are vampires?
Tripp Lite Digital Signage & Display: Solutions and Installation Diagrams
Tripp Lite’s wide range of cables, extenders, splitters, receivers and more meet the needs of every application in digital signage from retrofitting legacy equipment to implementing the latest technology.
This brochure covers a few common setups, along with solutions and diagrams.
View the full line of Tripp Lite solutions here: http://www.tripplite.com/category/cables-connectors/12#type59
Tripp Lite Portable AC Unit vs. The Other Guys
Tripp Lite's SRCOOL12k with SRCOOLNET is the only portable AC Unit purpose-built for IT applications. It features remote manageability, precise cooling control and unattended operations.
But how does Tripp Lite stack up against the other guys?
For more information, go to: tripplite.com/RemoteCooling
PCI Compliance with Tripp Lite Wall Mount Rack Cabinets
Tripp Lite's Wall-Mount Rack Enclosures help merchants achieve PCI compliance by securing network/telecommunications hardware and storage media which prevents credit, debit, and ATM card fraud.
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
This easy-to-use guide helps you determine what kind of power strips and surge protectors you can use in your healthcare and medical facility from patient-care areas to mobile applications to nurses' stations and more. Tripp Lite healthcare power strips and surge protectors are meet UL requirements for use that meets regulatory code compliance.
Download the white paper "Power Strip Safety & Regulatory Compliance: A Comprehensive Guide to Utilizing Power Strips in Healthcare Facilities" at http://www2.tripplite.com/malp/medical-power-strip-white-paper
Reversible USB Cables from Tripp Lite
Tripp Lite reversible USB cables take the guesswork out of USB connections. With a unique reversible type A connector, connections are right every time. Available with micro and mini connector types.
Integrated Solutions for Healthcare
Tripp Lite offers solutions for all healthcare applications, including patient-care areas, to power, protect, secure, cool, control and connect electrical and electronic equipment.
Outlet and Plug Types Photos
This document provides information about common outlet and plug types used in North America and internationally. It lists numerous NEMA and IEC electrical outlet and plug standards including 5-15R, L5-20R, L6-30R, 6-20R, IEC-320-C19, and IEC-309 Blue 30A. It also lists some common manufacturers of outlets and plugs like Hubbell.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
More Related Content
More from Tripp Lite
Charging Stations Protect & Organize Tablets - case study
Tripp Lite's Charging Stations secure and charge tablets at Visitation Catholic School.
More info: http://www.tripplite.com/products/usb-ac-charging~38
Digital Signage Growth by the Numbers
Discover the most effective form of advertising for your business.
How a UPS System Protects Your Equipment
Learn how a Tripp Lite UPS System can protect your equipment.
For more information, go to:
http://www.tripplite.com/products/ups-systems~11
Why You Need a Surge Protector
Learn why having a surge protector is a must. Which one is best for you?
For more information, go to:
http://www.tripplite.com/products/surge-protectors~19
Charging Stations for tablets & Chromebooks by Tripp Lite
Protect the digital classroom with Tripp Lite Charging Stations to secure, charge, organize, and sync tablets and Chromebooks.
For more information, go to: http://www.tripplite.com/products/catalog/plid/62
HDBaseT HDMI Extenders
For more information, go to: http://www.tripplite.com/products/splitters-switches-extenders~8?2112=HDBaseT%20Compliant
VGA Display Solutions with Diagrams
Tripp Lite VGA display solutions with diagrams covering
-- VGA over Cat5 (UTP)
-- VGA + Audio over Cat5 (UTP)
-- VGA + serial over Cat5 (UTP)
View all of Tripp Lite’s VGA solutions here: http://www.tripplite.com/product/VGA/971
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite
The document summarizes Tripp Lite's new high-density fiber patch panels, which offer modular cassette options for scalability and density. The panels support various fiber protocols and applications in telecom and data centers. They can accommodate up to 14 modules in just 2U of rack space and have unique front- or rear-facing mounting options.
Cut Off Vampire Appliances' Phantom Loads with Tripp Lite
Phantom power is costing you up to $200 per year! Cut power to electronics that are sucking you dry. Items like computers, media players, cell phone chargers and lamps may be in the off position, but they're still using electricity while plugged in. With Tripp Lite's ECO-Surge Protectors and ECO-UPS Systems, you can banish phantom loads with power save outlets.
What other pieces in your house are vampires?
Tripp Lite Digital Signage & Display: Solutions and Installation Diagrams
Tripp Lite’s wide range of cables, extenders, splitters, receivers and more meet the needs of every application in digital signage from retrofitting legacy equipment to implementing the latest technology.
This brochure covers a few common setups, along with solutions and diagrams.
View the full line of Tripp Lite solutions here: http://www.tripplite.com/category/cables-connectors/12#type59
Tripp Lite Portable AC Unit vs. The Other Guys
Tripp Lite's SRCOOL12k with SRCOOLNET is the only portable AC Unit purpose-built for IT applications. It features remote manageability, precise cooling control and unattended operations.
But how does Tripp Lite stack up against the other guys?
For more information, go to: tripplite.com/RemoteCooling
PCI Compliance with Tripp Lite Wall Mount Rack Cabinets
Tripp Lite's Wall-Mount Rack Enclosures help merchants achieve PCI compliance by securing network/telecommunications hardware and storage media which prevents credit, debit, and ATM card fraud.
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
This easy-to-use guide helps you determine what kind of power strips and surge protectors you can use in your healthcare and medical facility from patient-care areas to mobile applications to nurses' stations and more. Tripp Lite healthcare power strips and surge protectors are meet UL requirements for use that meets regulatory code compliance.
Download the white paper "Power Strip Safety & Regulatory Compliance: A Comprehensive Guide to Utilizing Power Strips in Healthcare Facilities" at http://www2.tripplite.com/malp/medical-power-strip-white-paper
Reversible USB Cables from Tripp Lite
Tripp Lite reversible USB cables take the guesswork out of USB connections. With a unique reversible type A connector, connections are right every time. Available with micro and mini connector types.
Integrated Solutions for Healthcare
Tripp Lite offers solutions for all healthcare applications, including patient-care areas, to power, protect, secure, cool, control and connect electrical and electronic equipment.
Outlet and Plug Types Photos
This document provides information about common outlet and plug types used in North America and internationally. It lists numerous NEMA and IEC electrical outlet and plug standards including 5-15R, L5-20R, L6-30R, 6-20R, IEC-320-C19, and IEC-309 Blue 30A. It also lists some common manufacturers of outlets and plugs like Hubbell.
More from Tripp Lite (16)
Charging Stations Protect & Organize Tablets - case study
Charging Stations Protect & Organize Tablets - case study
Charging Stations for tablets & Chromebooks by Tripp Lite
Charging Stations for tablets & Chromebooks by Tripp Lite
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite
Cut Off Vampire Appliances' Phantom Loads with Tripp Lite
Cut Off Vampire Appliances' Phantom Loads with Tripp Lite
Tripp Lite Digital Signage & Display: Solutions and Installation Diagrams
Tripp Lite Digital Signage & Display: Solutions and Installation Diagrams
PCI Compliance with Tripp Lite Wall Mount Rack Cabinets
PCI Compliance with Tripp Lite Wall Mount Rack Cabinets
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
Power Strip & Surge Protector Guide in Healthcare Facilities – Tripp Lite
Recently uploaded
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Recently uploaded (20)
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Rack Cooling Efficiency Task List - Tripp Lite
- 1. Rack Cooling Efficiency Task List >100° F (>37.8° C) • High risk of damage and downtime • May invalidate equipment warranty 90° to 100° F (32.2° to 37.8° C) • Risk of damage and downtime • Short bursts (seconds to minutes) may be acceptable, depending on availability goals 80.6° to 90° F (27° to 32.2° C) • Within the “allowable” range • Okay for brief periods (hours to days) • Longer periods may compromise equipment life 77.1° to 80.6° F (25.1° to 27° C) • IT equipment operates reliably • Equipment fans use more electricity, negating other efficiency gains 77° F (25° C) • Ideal temperature for IT equipment • Both highly reliable and highly efficient 64.4° to 76.9° F (18° to 24.9° C) • IT equipment operates reliably • As temperature drops, efficiency drops • Costs increase without added benefits <64.4° F (<18° C) • Same as above, but even more inefficient • May require costly make-up humidification Intake Air Temperature Guidelines for IT Equipment Need help with a rack cooling solution? Contact a Tripp Lite Application Specialist: 773.869.1773 • presales_help@tripplite.com Task In Process Complete N/A General Environment Consider room construction, size and location Measure intake air temperatures Remove unnecessary heat sources Decommission unused equipment Spread loads to reduce hot spots Consider how power outage scenarios affect cooling Determine the proper role of HVAC systems Internal and External Rack Layout Arrange racks in a hot-aisle/cold-aisle layout Manage passive airflow inside and outside racks Manage cables Install solid side panels Use enclosures instead of open frame racks Use blanking panels to fill unused rack spaces Use passive heat removal solutions Use thermal ducts Use active heat removal solutions Use close-coupled active cooling systems 14-08-001_2C www.tripplite.comDownload the White Paper: Increase Rack Cooling Efficiency & Solve Heat-Related Problems: bitly.com/RackCoolingWP