Trial 3 dangerous waste management awareness slides 1
•Download as PPTX, PDF•
1 like•107 views
This document provides an overview of dangerous waste management and awareness training goals. It discusses regulations around waste labeling, drummed waste, satellite accumulation, and universal waste. Key points covered include definitions of solid and hazardous waste, waste characterization codes, examples of characterized wastes, labeling requirements, storage time limits, inspection procedures, and universal waste regulations. The review section restates some of the main requirements around drummed waste labeling and definition of solid waste.
Report
Share
Report
Share
Recommended
Understanding universal & hazardous waste
This document provides an overview of universal and hazardous waste management. It defines solid waste and hazardous waste, outlines the hazardous waste identification process, and describes generator requirements and regulations. There are three categories of hazardous waste generators - large quantity, small quantity, and conditionally exempt small quantity - with different waste accumulation, storage, and reporting standards. Generators must determine if their wastes are hazardous, track accumulation amounts, use manifests and proper disposal procedures, and comply with training and record keeping rules.
Dangerous wasteawareness 6 trial 4
This document provides guidance on managing different types of wastes at an oil refinery in compliance with regulations. It discusses proper procedures for labeling, inspecting, storing, and disposing of solid wastes, hazardous wastes, and other materials. Key requirements outlined include only storing hazardous waste for 90 days, keeping inspection records for 5 years, and filing an annual waste report. The document also provides examples of waste types and how they should be designated and handled.
Rowan Waste Disposal manual rev 7-14-2014 (1)
This document provides guidance on waste disposal for various types of waste generated offshore in the Gulf of Mexico. It lists over 20 different waste types along with information on their source, shipping name, notes, container/label requirements, and other details. The document includes appendices with additional resources like a vendor list, regional information, and health and safety contacts. It aims to standardize waste handling and disposal in accordance with relevant regulations.
Rcra training eoc
This document provides an overview of hazardous materials and waste management regulations. It discusses the Resource Conservation and Recovery Act (RCRA) and regulations around hazardous waste identification, accumulation, storage, transportation, and disposal. Key points covered include hazardous waste characteristics, generator requirements, proper labeling and manifesting of wastes, emergency response procedures, and enforcement actions for noncompliance.
Haz wastetraining
This document provides an overview of hazardous waste management training. It defines hazardous waste and outlines the characteristics that cause a waste to be considered hazardous, such as ignitability, corrosivity, reactivity, and toxicity. It discusses how to complete hazardous waste tracking forms and labels, including identifying the waste, quantities, and safety precautions. Regulations around accumulation and storage of hazardous waste on site for 90 days or less are covered, as well as exemptions for satellite accumulation areas where waste can be stored near the point of generation.
2014 Caterpillar EH&S Conference -
The document discusses waste characterization at Caterpillar sites. It covers the three main media streams - air, water, and solid waste. For each media, it highlights relevant regulations, compliance issues, and best practices. The presentation emphasizes evaluating all three media streams, planning and permitting, and avoiding hidden problems. Common wastes discussed include waste oil, filters, batteries, and lamps.
Classfication of Oil and Gas Wastes
Petroleum Industry is one of the major successive industries in todays economy. Being largely pronounced , It involves alot of stages which are both wild and supportive to the environment. In being wild, the environment is so pron to popullution whuc is mainly do to the wastes associated with this Industry.
Briefly in this presentation, you will be able to know all the different types of wastes associated with the petroleum industry ,how they are classified and how they are regulated.
email : ekanyikerodgers@gmail.com for more details
Baker, John, iSi Environmental, Crash Course in Hazardous Waste Management Ch...
A presentation at the 2015 Midwest Environmental Compliance Conference, May 13-14, 2015, Overland Park, KS
Recommended
Understanding universal & hazardous waste
This document provides an overview of universal and hazardous waste management. It defines solid waste and hazardous waste, outlines the hazardous waste identification process, and describes generator requirements and regulations. There are three categories of hazardous waste generators - large quantity, small quantity, and conditionally exempt small quantity - with different waste accumulation, storage, and reporting standards. Generators must determine if their wastes are hazardous, track accumulation amounts, use manifests and proper disposal procedures, and comply with training and record keeping rules.
Dangerous wasteawareness 6 trial 4
This document provides guidance on managing different types of wastes at an oil refinery in compliance with regulations. It discusses proper procedures for labeling, inspecting, storing, and disposing of solid wastes, hazardous wastes, and other materials. Key requirements outlined include only storing hazardous waste for 90 days, keeping inspection records for 5 years, and filing an annual waste report. The document also provides examples of waste types and how they should be designated and handled.
Rowan Waste Disposal manual rev 7-14-2014 (1)
This document provides guidance on waste disposal for various types of waste generated offshore in the Gulf of Mexico. It lists over 20 different waste types along with information on their source, shipping name, notes, container/label requirements, and other details. The document includes appendices with additional resources like a vendor list, regional information, and health and safety contacts. It aims to standardize waste handling and disposal in accordance with relevant regulations.
Rcra training eoc
This document provides an overview of hazardous materials and waste management regulations. It discusses the Resource Conservation and Recovery Act (RCRA) and regulations around hazardous waste identification, accumulation, storage, transportation, and disposal. Key points covered include hazardous waste characteristics, generator requirements, proper labeling and manifesting of wastes, emergency response procedures, and enforcement actions for noncompliance.
Haz wastetraining
This document provides an overview of hazardous waste management training. It defines hazardous waste and outlines the characteristics that cause a waste to be considered hazardous, such as ignitability, corrosivity, reactivity, and toxicity. It discusses how to complete hazardous waste tracking forms and labels, including identifying the waste, quantities, and safety precautions. Regulations around accumulation and storage of hazardous waste on site for 90 days or less are covered, as well as exemptions for satellite accumulation areas where waste can be stored near the point of generation.
2014 Caterpillar EH&S Conference -
The document discusses waste characterization at Caterpillar sites. It covers the three main media streams - air, water, and solid waste. For each media, it highlights relevant regulations, compliance issues, and best practices. The presentation emphasizes evaluating all three media streams, planning and permitting, and avoiding hidden problems. Common wastes discussed include waste oil, filters, batteries, and lamps.
Classfication of Oil and Gas Wastes
Petroleum Industry is one of the major successive industries in todays economy. Being largely pronounced , It involves alot of stages which are both wild and supportive to the environment. In being wild, the environment is so pron to popullution whuc is mainly do to the wastes associated with this Industry.
Briefly in this presentation, you will be able to know all the different types of wastes associated with the petroleum industry ,how they are classified and how they are regulated.
email : ekanyikerodgers@gmail.com for more details
Baker, John, iSi Environmental, Crash Course in Hazardous Waste Management Ch...
A presentation at the 2015 Midwest Environmental Compliance Conference, May 13-14, 2015, Overland Park, KS
RCRA Training Basics - Waste Site Mangement, US Army Puerto Rico
This document provides an overview of resource conservation and recovery act (RCRA) waste site management at USAG Fort Buchanan in Puerto Rico. It discusses managing hazardous materials and types of wastes, including hazardous, solid, and universal wastes. It also covers material versus waste definitions, hazardous material storage requirements, safety data sheets, and the phase-in of the globally harmonized system of classification. The document summarizes RCRA regulations and goals, hazardous waste generator requirements, and the management of specific wastes like batteries, paint, used oil, and oil filters.
Waste management training
This document provides an overview of waste management training procedures at Premier regarding proper handling and disposal of hazardous wastes in compliance with RCRA regulations. It defines hazardous wastes and characteristics, outlines requirements for generators of different quantities, and reviews Premier's specific waste streams and emergency response procedures.
Trial 1 dot general awareness
This document provides an overview of DOT hazardous materials shipping requirements including packaging, marking, labeling, shipping papers, and incident reporting. It discusses the goals of EPA, OSHA, and DOT regulations and outlines the basic elements for hazardous waste shipping papers. It also describes packing group danger levels, non-bulk container requirements, bulk container placarding, loading/unloading procedures, and incident reporting thresholds and exceptions.
Sealing the Unseen: Efficiency through Emission Control
PILOT Gaskets technical article on the importance of Fugitive Emissions Control in Process Refinery and Chemicals Plants to seal Valves, Pumps, Gland Packings, Flanges and Joints.
trial 3 dangerous waste management awareness slides 2
This document outlines goals and procedures for managing different types of waste. It discusses the proper disposal of non-regulated waste, household hazardous waste, and hazardous waste. Procedures are provided for filling out hazardous waste manifests, disposing of empty drums and contaminated soil, and reporting and record keeping requirements. The overall aim is to provide training on safely and properly disposing of different categories of waste in compliance with regulations.
Waste Management | Hazardous Waste Management
This document defines various types of wastes and provides classifications. It discusses solid wastes, liquid wastes, hazardous wastes, and other categories. Universal wastes and e-wastes are defined. The impacts of improper waste management on health, environment and climate are outlined. The waste hierarchy of reduce, reuse and recycle is presented as the optimal approach. Employee education and various waste diversion strategies like donating, exchanging and reducing are recommended actions.
Hazardous wastes
1. Hazardous waste landfills are designed with multiple layers to prevent contamination, including compacted waste, clay and plastic linings, leachate collection systems, and groundwater monitoring wells.
2. Common hazardous wastes include cleaning products, paints, pesticides, batteries, motor oil and antifreeze which should not be thrown in the trash or poured down drains but disposed of properly.
3. Transitioning to a low-waste society requires reducing and reusing materials to minimize pollution, following principles like industrial ecology that mimic natural cycles.
Hazardous Debris Waste Processing Training
This document provides training on Purdue University's chemical waste debris pick-up procedures. It outlines the standard operating procedure for waste identification, containerization, and storage. Trainees learn to differentiate between hazardous and non-hazardous waste using waste profiles with examples. The expectations are that all debris waste will be processed by the end of the shift, though it allows for storing non-hazardous waste when time constraints make processing infeasible. Non-compliance with waste handling regulations carries associated legal fines.
Chemical Waste from Industries
This document provides information about chemical waste from industries, including guidance for proper disposal, chemical compatibility, waste container requirements, and chemical waste management procedures. It defines chemical waste and provides examples. It also discusses selecting appropriate containers based on waste type, labeling, storage, and removal requirements. Mapping of chemical waste in the US is presented, showing various pollutants from industry and their impacts.
Hazardous Waste Refresher Training by SUNY
This document provides an overview of hazardous waste regulations and procedures at SUNY Oneonta. It summarizes the Resource Conservation and Recovery Act (RCRA) which established regulations for hazardous waste from generation to disposal. Key requirements outlined include proper labeling, inspection, and storage of chemical waste; procedures for disposal and spill response; and restrictions against disposing hazardous waste in drains, trash, or by evaporation. The goal is to ensure all hazardous materials are handled according to environmental and safety standards.
HazardousWaste Training
This document provides an overview of hazardous waste management regulations and procedures. It discusses:
- Who regulates hazardous waste at the federal, state, and local levels.
- The key aspects of the Resource Conservation and Recovery Act (RCRA) including cradle-to-grave management and classifications of hazardous waste generators.
- The definitions and examples of characteristic hazardous wastes including ignitable, corrosive, reactive, and toxic wastes.
- Requirements for proper identification, storage, disposal, and spill response procedures for hazardous waste.
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Global Peatlands Map and Hotspot Explanation Atlas
Presented by Alexandra Barthelmes at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Peatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
一比一原版(UMTC毕业证书)明尼苏达大学双城分校毕业证如何办理
原件一模一样【微信：6496090】【(UMTC毕业证书)明尼苏达大学双城分校毕业证成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：6496090
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
More Related Content
Similar to Trial 3 dangerous waste management awareness slides 1
RCRA Training Basics - Waste Site Mangement, US Army Puerto Rico
This document provides an overview of resource conservation and recovery act (RCRA) waste site management at USAG Fort Buchanan in Puerto Rico. It discusses managing hazardous materials and types of wastes, including hazardous, solid, and universal wastes. It also covers material versus waste definitions, hazardous material storage requirements, safety data sheets, and the phase-in of the globally harmonized system of classification. The document summarizes RCRA regulations and goals, hazardous waste generator requirements, and the management of specific wastes like batteries, paint, used oil, and oil filters.
Waste management training
This document provides an overview of waste management training procedures at Premier regarding proper handling and disposal of hazardous wastes in compliance with RCRA regulations. It defines hazardous wastes and characteristics, outlines requirements for generators of different quantities, and reviews Premier's specific waste streams and emergency response procedures.
Trial 1 dot general awareness
This document provides an overview of DOT hazardous materials shipping requirements including packaging, marking, labeling, shipping papers, and incident reporting. It discusses the goals of EPA, OSHA, and DOT regulations and outlines the basic elements for hazardous waste shipping papers. It also describes packing group danger levels, non-bulk container requirements, bulk container placarding, loading/unloading procedures, and incident reporting thresholds and exceptions.
Sealing the Unseen: Efficiency through Emission Control
PILOT Gaskets technical article on the importance of Fugitive Emissions Control in Process Refinery and Chemicals Plants to seal Valves, Pumps, Gland Packings, Flanges and Joints.
trial 3 dangerous waste management awareness slides 2
This document outlines goals and procedures for managing different types of waste. It discusses the proper disposal of non-regulated waste, household hazardous waste, and hazardous waste. Procedures are provided for filling out hazardous waste manifests, disposing of empty drums and contaminated soil, and reporting and record keeping requirements. The overall aim is to provide training on safely and properly disposing of different categories of waste in compliance with regulations.
Waste Management | Hazardous Waste Management
This document defines various types of wastes and provides classifications. It discusses solid wastes, liquid wastes, hazardous wastes, and other categories. Universal wastes and e-wastes are defined. The impacts of improper waste management on health, environment and climate are outlined. The waste hierarchy of reduce, reuse and recycle is presented as the optimal approach. Employee education and various waste diversion strategies like donating, exchanging and reducing are recommended actions.
Hazardous wastes
1. Hazardous waste landfills are designed with multiple layers to prevent contamination, including compacted waste, clay and plastic linings, leachate collection systems, and groundwater monitoring wells.
2. Common hazardous wastes include cleaning products, paints, pesticides, batteries, motor oil and antifreeze which should not be thrown in the trash or poured down drains but disposed of properly.
3. Transitioning to a low-waste society requires reducing and reusing materials to minimize pollution, following principles like industrial ecology that mimic natural cycles.
Hazardous Debris Waste Processing Training
This document provides training on Purdue University's chemical waste debris pick-up procedures. It outlines the standard operating procedure for waste identification, containerization, and storage. Trainees learn to differentiate between hazardous and non-hazardous waste using waste profiles with examples. The expectations are that all debris waste will be processed by the end of the shift, though it allows for storing non-hazardous waste when time constraints make processing infeasible. Non-compliance with waste handling regulations carries associated legal fines.
Chemical Waste from Industries
This document provides information about chemical waste from industries, including guidance for proper disposal, chemical compatibility, waste container requirements, and chemical waste management procedures. It defines chemical waste and provides examples. It also discusses selecting appropriate containers based on waste type, labeling, storage, and removal requirements. Mapping of chemical waste in the US is presented, showing various pollutants from industry and their impacts.
Hazardous Waste Refresher Training by SUNY
This document provides an overview of hazardous waste regulations and procedures at SUNY Oneonta. It summarizes the Resource Conservation and Recovery Act (RCRA) which established regulations for hazardous waste from generation to disposal. Key requirements outlined include proper labeling, inspection, and storage of chemical waste; procedures for disposal and spill response; and restrictions against disposing hazardous waste in drains, trash, or by evaporation. The goal is to ensure all hazardous materials are handled according to environmental and safety standards.
HazardousWaste Training
This document provides an overview of hazardous waste management regulations and procedures. It discusses:
- Who regulates hazardous waste at the federal, state, and local levels.
- The key aspects of the Resource Conservation and Recovery Act (RCRA) including cradle-to-grave management and classifications of hazardous waste generators.
- The definitions and examples of characteristic hazardous wastes including ignitable, corrosive, reactive, and toxic wastes.
- Requirements for proper identification, storage, disposal, and spill response procedures for hazardous waste.
Similar to Trial 3 dangerous waste management awareness slides 1 (11)
RCRA Training Basics - Waste Site Mangement, US Army Puerto Rico
RCRA Training Basics - Waste Site Mangement, US Army Puerto Rico
Sealing the Unseen: Efficiency through Emission Control
Sealing the Unseen: Efficiency through Emission Control
trial 3 dangerous waste management awareness slides 2
trial 3 dangerous waste management awareness slides 2
Recently uploaded
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Climate Change All over the World .pptx
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Global Peatlands Map and Hotspot Explanation Atlas
Presented by Alexandra Barthelmes at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Peatlands of Latin America and the Caribbean
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Promoting Multilateral Cooperation for Sustainable Peatland management
Presented by Agus Julianto on GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland Sustainably
一比一原版(UMTC毕业证书)明尼苏达大学双城分校毕业证如何办理
原件一模一样【微信：6496090】【(UMTC毕业证书)明尼苏达大学双城分校毕业证成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：6496090
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
How about Huawei mobile phone-www.cfye-commerce.shop
How about Huawei mobile phone-www.cfye-commerce.shop
原版制作(Newcastle毕业证书)纽卡斯尔大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(Newcastle毕业证书)纽卡斯尔大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge EducationGlobal Landscapes Forum (GLF)
Presented by Feri Johana at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyEnhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland managementGlobal Landscapes Forum (GLF)
Presented by Jan Peters at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and ActionWildlife-AnIntroduction.pdf so that you know more about our environment
All about wildlife, if you are fond of animals and wildlife then do follow us for more content like this
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...Global Landscapes Forum (GLF)
Presented by Sonya Dewi at GLF Peatlands 2024 - 360 Degree Approach to Improving Capacity of Multiple Stakeholders to Manage Peatland SustainablyRecently uploaded (20)
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...
Microbial characterisation and identification, and potability of River Kuywa ...
Microbial characterisation and identification, and potability of River Kuywa ...
Global Peatlands Map and Hotspot Explanation Atlas
Global Peatlands Map and Hotspot Explanation Atlas
Improving the viability of probiotics by encapsulation methods for developmen...
Improving the viability of probiotics by encapsulation methods for developmen...
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.
Promoting Multilateral Cooperation for Sustainable Peatland management
Promoting Multilateral Cooperation for Sustainable Peatland management
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...
Epcon is One of the World's leading Manufacturing Companies.
Epcon is One of the World's leading Manufacturing Companies.
How about Huawei mobile phone-www.cfye-commerce.shop
How about Huawei mobile phone-www.cfye-commerce.shop
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Peatland Management in Indonesia, Science to Policy and Knowledge Education
Enhanced action and stakeholder engagement for sustainable peatland management
Enhanced action and stakeholder engagement for sustainable peatland management
world-environment-day-2024-240601103559-14f4c0b4.pptx
world-environment-day-2024-240601103559-14f4c0b4.pptx
Wildlife-AnIntroduction.pdf so that you know more about our environment
Wildlife-AnIntroduction.pdf so that you know more about our environment
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Improving the Management of Peatlands and the Capacities of Stakeholders in I...
Trial 3 dangerous waste management awareness slides 1
- 2. Training Goals Waste Labeling for different categories of waste Drummed waste regulations Universal waste regulations Satellite accumulation regulations
- 3. Definition of Solid waste Abandoned/Destined for Disposal Inherently Waste like Recycled Haz Waste Exclusions – Sewer/NPDES Discharge 40 CFR 261.2 (a)(1) a solid waste is any discarded material that is not excluded by variance granted under §§ 260.30 and 260.31
- 4. Waste Characterization EPA Listed Codes K/F Codes U/P Codes EPA Characteristic Waste D Codes WADOE W Codes
- 5. Examples of Waste Characterization Jet Fuel Treater Clay: WADOE Criteria Waste (WT02) Refinery Heat Exchanger Sludge: Listed Waste (K050) Spent Reformer Catalyst: Characteristic Waste (D001, D018)
- 6. Waste Labeling Drums containing Dangerous Waste “Accumulated Start Date” Date waste was first into the drum “Contents” Brief description of waste origin Crude Oil Tank Bottom Sludge API Separator Sludge
- 7. Waste Labeling Label Orientation Place on upper 1/3 of drum DOT Hazard identification label placed next to Dangerous Waste Label
- 8. Drummed Waste New open-head drums from receiving Avoid mixing Haz/Non-haz Label drums as soon as waste is places into drum Contact environmental department for proper labels
- 9. Drummed Waste Leave minimum of 6’’ outage in the drum Drums with general refuse must be marked Lid gasket is intact Secure drum lid with tightened ring Transport drums to the haz waste pad
- 10. Dangerous Waste Storage 90 Day Maximum Proper labeling Aisles at least 30’’ apart
- 11. Dangerous Waste Storage Secondary containment Container/Waste Compatibility Weekly inspections
- 12. Satellite Accumulations Accumulation of Dangerous Waste <55 gal per Waste Stream-No Date on Label At the Point of Generation-Operator Control Inspection and Containment consideration
- 13. Satellite Accumulation Wastes at U.S. Oil Spent Aerosol Cans COD Analytical Waste/Mercury Tank #471 Strainer Debris Spent Paint/Thinner Batteries (Universal Waste) Oily Rags/Absorbent Pads (Non-Haz)
- 14. Inspecting Hazardous Waste Drums Will the drum leak if it tips over? Fresh pair of eyes The inspector is looking at every waste storage container with new eyes
- 15. Universal Waste Fluorescent Lamps Batteries Monitors Thermostats No broken Lamps
- 16. Universal Waste Can be stored for up to one year Must be properly packaged and labeled
- 17. Review Drummed Waste Leave 6’’ of outage Drums with general refuse must be marked Label Orientation Place on upper 1/3 of drum DOT Hazard identification label placed next to Dangerous Waste Label Definition of Solid waste a solid waste is any discarded material that is not excluded by variance granted under §§ 260.30 and 260.31