The document provides instructions for submitting thesis formats at the Department of Electrical Engineering. It specifies formatting requirements such as main headings in Times New Roman size 14 bold, subheadings in size 12 bold, and simple text in size 12 justified. Theses must be submitted in A4 size with 1-inch margins and centralized figures/tables. Specific parts of the attached format must be changed with own particulars. Four hard copies are required after obtaining signatures on the certificate of approval page by June 15, 2016, including one each for the supervisor, co-supervisor, head of department office, and library. The thesis copy style should be black text with golden writing on the front page.

1. Department of Electrical Engineering
Thesis Format and Submission Instructions:
1. Main Headings
o Times New Roman
o Size 14
o Bold
2. Sub Headings
o Times New Roman
o Size 12
o Bold
3. Simple Text
o Times New Roman
o Size 12
o Justified Text
4. Use A4 size Page Settings with 1” margin on all sides of Page.
5. All Figures & Tables should be centralized.
6. All Red entries in the Format (Attached) have to be Change with own Particulars.
7. After getting signature on “Certificate of Approval” page from every individual member on Spiral Binding
submit the Spiral Binding to HoD Office (Project Coordinator) latest by June 06, 2016.
8. Number of Hard Copies Required: 04
a. Supervisor 01
b. Co Supervisor 01
c. Head of Department Office 01
d. Library 01
9. Final Thesis Copy Should be submitted to offices of mention above before June 15, 2016.
10. Thesis Copy Style & Color:
a. Thesis Copy Color: Black
b. Thesis Copy Writing on Front Page Color: Golden
c. Page attached after instruction is Cover Page of thesis.

2. LOAD MANAGEMENT WITH HYBRID POWER SYSTEM
Supervisor Co-Supervisor
Engr. Fayyaz A. Chaudhry Engr. Muhammad. Ejaz
Assistant Professor Lab Engineer
Submitted By
Rashid Jamil Satti UET-10-SCET-EE-01
Arman Ali UET-10-SCET-EE-04
Usman Ameen UET-10-SCET-EE-17
Zahoor Ghaus UET-10-SCET-EE-18
DEPARTMENT OF ELECTRICAL ENGINEERING
SWEDISH COLLEGE OF ENGINEERING AND TECHNOLOGY
WAH CANTT
Session 2012-2016

3. LOAD MANAGEMENT WITH HYBRID POWER SYSTEM
Supervisor Co-Supervisor
Engr. Fayyaz A. Chaudhry Engr. Muhammad Ejaz
Assistant Professor Lab Engineer
Submitted By
Rashid Jamil Satti UET-10-SCET-EE-01
Arman Ali UET-10-SCET-EE-04
Usman Ameen UET-10-SCET-EE-17
Zahoor Ghaus UET-10-SCET-EE-18
A Project Report submitted in partial fulfillment of the requirements for the
award of Bachelor’s Degree in
Electrical Engineering
DEPARTMENT OF ELECTRICAL ENGINEERING
SWEDISH COLLEGE OF ENGINEERING AND TECHNOLOGY
Affiliated with
UNIVERSITY OF ENGINEERING AND TECHNOLOGY
TAXILA.

4. CERTIFICATE OFAPPROVAL
Title of Project: LOAD MANAGEMENT WITH HYBRID POWER SYSTEM
Name of Students Registration No.
1. Rashid Jamil Satti UET-10-SCET-EE-01
2. Arman Ali UET-10-SCET-EE-04
3. Usman Ameen UET-10-SCET-EE-17
4. Zahoor Ghaus UET-10-SCET-EE-18
Accepted by the Department of Electrical Engineering, Swedish College of Engineering & Technology, Wah
Cantt in partial fulfillment of the requirement for the BSc. Degree in Electrical Engineering.
_______________________
Head of Department
Engr. Prof. Dr. Umar Farooq
Professor
_______________________
Supervisor
Engr. Fayyaz A. Chaudhry
Assistant Professor
_______________________
Co-Supervisor
Engr. Muahhamd. Ejaz
Lab Engineer
Viva voce committee
_______________________
Engr. Mukhtar Ahmad Qadri
Assistant Professor
_______________________
Engr. Fayyaz A. Chaudhry
Assistant Professor
_______________________
Engr. Waqas Mehmood
Assistant Professor
_______________________
Engr. Muhammad Asif
Assistant Professor

5. DECLARATION
We certify that project work titled “Load Management with Hybrid Power System” is our own work and
has not been presented elsewhere for assessment. Moreover, the material taken from other sources has also
been acknowledged properly.
_________________ _________________
Rashid Jamil Satti Arman Ali
UET-10-SCET-EE-01 UET-10-SCET-EE-04
____________________ __________________
Usman Amin Zahoor Ghaus
UET-10-SCET-EE-17 UET-10-SCET-EE-18

6. DEDICATION
To our parents, whose prayers and inspirations are the torches of our destination, our teachers those
who sacrificed for our prosperous future and our friends those who inspired us for the higher ideas of life.
Can Be Changed……

7. ACKNOWLEDGEMENT
All praise to Almighty Allah, who give us courage and spirit to complete the task, respect is for the last Holy
Prophet Muhammad (P.B.U.H) whose life is a model of guidance and knowledge for entire humanity
We are extremely thankful to our project supervisor ENGR. FAYYAZ A. CHAUDARY and Co Supervisor
ENGR. MUHAMMAD EHJAZ for giving us time and guidance in this project and also thankful to all the
teacher of Electrical Department. We cannot forget so many friends who always have been there for us.

8. ABSTRACT

9. Table of Contents

10. LIST OF FIGURES

11. List of Tables

12. CHAPTER NO 1
INTRODUCTION