The document discusses products from Holden Installations Limited, including protection bollards and guardrails constructed from solid block high density polyethylene. These products are designed to absorb vehicle impact and protect equipment and personnel. The company also produces insulated panels, hygienic food safe doors, PVC sheeting, and operates as a family business since 1986 serving the food production and distribution industries.

2. 02

3. The latest product we have to offer our customers are protection
bollards and guardrails. These are constructed with solid block high
density polyethylene (HDPE) and are designed to absorb impact from
moving vehicles and help to eliminate damage to equipment and per-
sonnel. They are easy to install, cost-effective, low maintenance and are
ideally suited to the food production and distribution industries.
Holden Installations Limited is a family run business that has been in
operation since 1986. We service the food production and temperature
controlled distribution industries.
We work closely with our sister company Thermo Hygiene doors who
specialize in manufacturing hygiene grade doors for the same sectors.
Holden Installations Limited prides itself on its commitment to quality
and continous improvement. This compels us to offer the very best
solutions to our customers and we are fully committed to developing
our range of products to ensure our customers receive the innovation,
quality, service and commitment that we offer.
We operate in four divisions:
· Insulated Panels
· Hygienic Food Safe Doors
· PVC Sheeting
· Bollards & Guardrails
P300
P100
P200
CEILINGS
HDI - PROTECTION
BOLLARDS
GUARDRAILS04
06
08
09
10
12
13
Index
Our Customers:
03

4. CHARACTERISTICS:
• Hygienic-sanitary cladding.
• Foamed PVC panels coextruded finish.
• Thick panel (8 mm).
• Non-porous surface.
• Sanitary registration.
• HACCP sanitary certificate.
• Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option).
• CE Marking (in the +Plus option).
• Highly resistant to impact.
• Tongue and groove connection system with recessed screw.
• Resistant to aggressive ambients.
• Full set of profiles for finishes without any visible screws.
• Standard length of 2.5, 3, 3.5 and 4 meters, can also be made to measure.
• Product protected by patent.
• 100% recyclable.
P300
04
PROPERTIES UNIT VALUE
Conductivity coefficient W/mºC 0.07
Linear expansion coefficient K-1
54 . 10-6
Use temperature range
Tmin.
ºC
40
Tmax -20
Elasticity Module N / mm2
1200
Length of breakage % 40
Mass density g/cm3
0.55
Coextrusion layer density g/cm3
1.4
Shore Hardness D - 74
Reaction to fire classification (+PLUS) - Bs2d0
Other certificate (+PLUS) - CE Marking

5. DETAIL
CERTIFICATIONS AND APPROVALS :
• HACCP sanitary certificate
• Fire rating B s2 d0 (Option +PLUS)
• ISO 9001 Certified
• AENOR, IQ-NET, CE Certificates
MEASUREMENTS:
1. Width 1/3 m. ± 2 mm.
2. Variable length ± 10mm.
3. Thickness 6,2 ± 0,8mm. central areas
RECOMMENDED PROFILES:
ADVANTAGES:
• Highly resistant to fire.
• Ideal for food processing facilities.
• Easy installation, no glue required.
• Protects walls from oxidisation.
• Protects walls from knocks.
• Easy to clean.
• Non-porous.
• Installation with no profile joints and
recessed screws.
• Strength and rigidity due to its 8mm
thickness.
• The tongue and groove system means no
joints.
• Material and manufacturing method
patented.
• Absorbs knocks and does not crack.
• Protects from oxidation.
• Saves on maintenance cost.
USES:
• Hygienic cladding and wall lining.
• Rehabilitation of cold storage rooms.
• Sanitation of food production areas.
• All types of agrifood cladding.
• Ideal for all wall types.
• Sanitary approvals.
05
A
B
C
Ref. 20
Ref. 2 Ref. 4 Ref. 6 Ref. 11
Ref. 15

6. CHARACTERISTICS:
• Solid panel manufactured in highly resistant PVC.
• Minimum thickness (maximum of 5.5mm).
• Ribbed panel for extra rigidity.
• Very easy to manage.
• Ideal for uneven surfaces.
• The corrugated design means the piece will not warp over time.
• Even finish.
• Corrugated surface.
• Tongue and groove connection system with recessed screw.
• Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option).
• CE Marking (in the +Plus option).
PROPERTIES Unit Value
(d) Density g/cm3
1.45
Conductivity coefficient W/mºC 0.17
Linear expansion coefficient K-1
5·10-6
Length of breakage % 40
Use temperature range
Tmin.
ºC
40
Tmax -20
Elasticity Module Kg/cm2
25000
Shore Hardness D º Shore 78-88
Stabilization - Free of Pb
Reaction to fire classification (+PLUS) - Bs2d0
Other certificate (+PLUS) - CE Marking
P100
06

7. CERTIFICATIONS AND APPROVALS:
• HACCP sanitary certificate
• Fire rating B s2 d0 (Option +PLUS)
• ISO 9001 Certified
• AENOR, IQ-NET, CE Certificates
ADVANTAGES:
• Fire resistant.
• Aesthetic advantages thanks to its
surface corrugated that helps conceal
joints.
• Highly resistant to knocks.
• Finish similar to refrigerator panels.
• Best VALUE FOR MONEY.
• No need to paint or tile wall.
• No need for masonry work or repairs.
USES:
• Hygienic cladding.
• Wall lining.
• Rehabilitation of cold storage rooms.
• Where minimum thickness is required.
• Sanitation of food production areas.
• All types of agrifood cladding.
• Ideal for all types of walls.
• Suitable for sanitary approval.
TONGUE AND GROOVE CONNECTION
SYSTEM WITH RECESSED SCREW
APPEARANCE OF CONNECTED PANELS
MEASUREMENTS:
1. Width 1/3 m. ± 2 mm.
2. Variable length ± 10 mm.
3. Thickness 2 mm central areas.
07
C
A
B
Ref. 1
Ref. 3
Ref. 8

8. CHARACTERISTICS :
• Highly resistant to impact.
• Hygienic joints.
• Easy installation with recessed screws.
• Auxiliary PVC profiles.
• Sleek finish.
• 100% recyclable.
CERTIFICATIONS AND APPROVALS:
• ISO 9001 Certified
• AENOR, IQ-NET, CE Certificates
WHAT IS IT?
It’s a plain PVC sheet, 1.7mm. thick and
333mm wide (3 units 1m.) with a standard
length of 2.5m, 3m, 4m. Consult for other
measurements
USES:
• Protects panels from knocks.
• Protects from oxidation.
• Sanitary cladding.
• Wall lining for building work.
• Rehabilitation of chambers.
• All types of coating.
• Easy to clean.
P200
PVC COVERINGS
MEASUREMENTS:
1. Width 1/3 m. ± 2 mm.
2. Variable length ± 10 mm.
3. Thickness 1.7 mm central areas.
DETAIL
CONNECTED PANELS
08
A
B
C C

9. CHARACTERISTICS :
• PVC coating for ceilings has a thickness of 10mm.
• Minimum thickness.
• Easy to clean.
• For food use.
• Does not rust.
• Maintenance free.
• Protects ceilings from moisture and steam.
• Resistant to fats and acids.
• Easy installation with recessed screws.
• Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option).
• CE Marking (in the +Plus option).
CERTIFICATIONS AND APPROVALS:
• HACCP sanitary certificate
• Fire rating B s2 d0 (Option +PLUS)
• ISO 9001 Certified
• AENOR, IQ-NET, CE Certificates
MEASUREMENTS:
1. Width 1/3 m. ± 2 mm.
2. Variable length ± 10 mm.
3. Thickness 10 mm central areas.
DETAIL
09
A
B
C C
PROPERTIES Unit Value
(d) Density g/cm3
1.4
Conductivity coefficient W/mºC 0.17
Linear expansion coefficient K-1
5·10-6
Length of breakage % 40
Use temperature range
Tmin.
ºC
40
Tmax -20
Elasticity Module Kg/cm2
25000
Stabilization - Free of Pb
Reaction to fire classification (+PLUS) - Bs2d0
Other certificate (+PLUS) - CE Marking
CEILINGS

10. CHARACTERISTICS:
• Zero maintenance.
• Can be levelled.
• High density polymer.
• Without edges or corners.
• Resistant to corrosive environments.
• Does not rust.
• High impact resistance.
• High visibility due to its colour.
• Impact absorption thanks to its flexibility.
• Stops fungi or bacteria growth.
Hygienic
Shock Proof
Protection
Technical data UNIIT HMW-PE
Density ISO 1183 g/cm3 0.95
Yield stress DIN EN ISO 527 N/mm2 28
Elongation yield DIN EN ISO 527 % +8
Length of breakage % 300
Tensile-E-modulus DIN EN ISO 527 MPa 850
Impact strength DIN EN ISO 179 KJ/m2 NO BREAK
Notched impact strength DIN EN ISO 179 KJ/m2 50
Ball identification hardness DIN EN ISO 2039-1 N/mm2 45
Shore hardness D ISO 868 shore 66
Linear expansion coefficient DIN 53752 K-1 1’8 . 10-4
Thermal conductivity DIN 52612 W/m-K 0.38
Dielectric strength VDE 0303-21 KV/mm 44
Surface resístanse DIN IEC 167 Ohm 1014
Temperature range ºC -100 until +80
Chemical resístanse
- High resistance to acid, alkali
and solvent.
Physiologically acceptable - Yes
Welding - Yes
Glassfibre reinforcing - -
Lacquering, printing - -
Hot forming - Possible
ADVANTAGES:
• One heavy duty fixing per foot.
• Easily interchangeable if damaged.
• Reduces maintenance costs.
• Easy to assemble.
• No painting required as it pre-coloured.
• Easy to clean.
10

11. SOLID BLOCK
Made of solid pieces to give maximum
strength. In addition there is no paint as
the pigment is in the raw material.
SPECIAL ROD
Special alloy to ensure impact flexibility
and prevent breakage.
HIGH DENSITY POLYETHYLENE
Highly resistant material performing
better than stainless steel and meets the
standards for materials in contact with
food.
FLOOR PROTECTION
Special coating that insulates and
protects the floor from impact received
from the rod and avoids breaking it.
NEOPRENE
Special Neoprene to sealing protection
joint and prevent any leakage.
REPLACEABLE ANCHORAGE SYSTEM
Ensures maximum fastening and resistance
protection and if necessary allows the rod
to be replaced.
11

12. 12
USES:
• The best choice to protect the inside
of doors and corners.
• It is also an ideal solution for small
areas needing protection.
USES:
For the protection and safety of personnel,
given that its design allows accidents to be
avoided.
BOLLARD
PERSONNEL-GUARDRAIL
DIMENSIONS (mm) DRILL (mm)
Diameter Height ∅Rod ∅ Depth
70 262 20 48 150
100-120 430 30 68 170
100-120 530 30 68 170
120 800 30 68 170
DIMENSIONS DRILL (mm)
Diameter (mm) Length (mm)
Anchor
points ∅Rod Height ∅ Depth
70 - 120
500 - 1000 2
20
500
800
48 1501500 - 2000 3
2500 4
70 - 120
500 - 1000 2
20
1000
1100
48 1501500 - 2000 3
2500 4

13. PROTECTION
13
USES:
The best solution to protect any wall or
object.Thanks to its anchorage it has great
impact resistance.
USES:
The most robust protection, able to withstand
an impact of more than 9 tons. Ideal for areas
where traffic is very hectic in critical areas.
GUARDRAIL
DOUBLE GUARDRAIL
DIMENSIONS DRILL (mm)
Diameter (mm) Length (mm)
Anchor
points ∅Rod Height ∅ Depth
70
500 - 1000 2
16 125 36 1501500 - 2000 3
2500 4
100
500 - 1000 2
20 / 30 150 48 / 68 1701500 - 2000 3
2500 4
120
500 - 1000 2
20 / 30
175/
275
48 / 68 1701500 - 2000 3
2500 4
DIMENSIONS DRILL (mm)
Diameter (mm) Length (mm)
Anchor
points ∅Rod Height ∅ Depth
70 / 70
500 - 1000 2
16 230 36 1201500 - 2000 3
2500 4
100 / 100
500 - 1000 2
20 300 48 1501500 - 2000 3
2500 4
120 / 120
500 - 1000 2
20 340 48 1501500 - 2000 3
2500 4

14. Low Maintenance
Cost Effective
Impact Absorption
Easy to Install

16. diseño_www.31416k.
Unit 7
Little Island Industrial Estate
Little Island
Cork
T45 FH33
T. +353 21 435 43 40
F. +353 21 435 43 16
info@holden.ie
www.holden.ie