FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.

1. FIRE
REACTION
A2
CLASS
VALIDATION
of reinforcement
system
MOISTURE
RESISTANCE
PERMEABILITY
Water
Vapour
NON-TOXIC
for workers
and the
environment
ECO
Ruredil
HEAT
RESISTANCE
FIRE
RESISTANCE
INTERNATIONAL
Patent
DT
200/2013
PCT++
EN
VALIDATION
of reinforcement
system
MOISTURE
RESISTANCE
PERMEABILITY
Water
Vapour
NON-TOXIC
for workers
and the
environment
ECO
Ruredil
HEAT
RESISTANCE
FIRE
RESISTANCE
INTERNATIONAL
Patent
CHARACTERISTICS
FRP
DT
200/2013
PCT++
EN
UNI
EN
VALIDATION
of reinforcement
system
MOISTURE
RESISTANCE
PERMEABILITY
Water
Vapour
NON-TOXIC
for workers
and the
environment
ECO
Ruredil
HEAT
RESISTANCE
FIRE
RESISTANCE
INTERNATIONAL
Patent
CHARACTERISTICS
FRP
DT
200/2013
PCT++
EN
UNI
EN
Description
RUREDIL XMESH C10 is a unique Fiber-Reinforced Cementitious Matrix (FRCM) composite
systemfortherepairandstrengtheningofmasonryconstructions.Itcomprisesofbidirectional
carbon fiber mesh, namely RUREDIL XMESH C10, working as a continuous reinforcement and
X Mortar 25 (RUREDIL X MORTAR 25) pozzolan-based hydraulic binder adhesive that anchors
RUREDIL XMESH C10 to the masonry substrate.
RUREDIL XMESH C10 is a high strength, bi-directional carbon fiber mesh with balanced
weight. RUREDIL X MORTAR 25 is a pozzolan-based adhesive that must be mixed with
water in the job site.
Use
• Increase shear and flexural strength of masonry structural panels
• Eliminates the formation of connection lines of arches and vaults
• Increase ductility of masonry structural elements
• Historic masonry preservation
• Seismic retrofit
Applications
• Interior and exterior
• Panels, columns, arches and vaults
• CMU, clay brick, hollow clay tiles, tuff and natural stone
• Historic masonry
Product Highlights
• ICC-ES ESR-2013 listed product
• Level of strengthening can be customized through the application of one or
more sheets of RUREDIL XMESH C10 carbon fiber.
• Once applied the system does not alter the response to fire of masonry
construction and therefore fire protection is not required, even for indoor
applications.
• Durable in conditions in conditions of high environmental temperature since the
system is not characterized by glass transition temperature limitations.
• Does not deteriorate when exposed to alkali environment Ca(OH)2 Na(OH) K(OH)
at pH>9.5
• Can be applied after rain over damp substrates
• Not affected by moisture, it maintains its performance properties over time in
humid environments.
1/6
RUREDIL
X MESH C10
Composite strengthening system for
repairing and strengthening of masonry
constructions
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
Ruredil
Technicalinfo
..................15.Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.
PRODUCT
CERTIFICATION
AC
434
IN COMPLIANCE
WITH
GUIDELINES
ACI
549

2. • Can be applied on both clay bricks, hollow clay tiles, tuff, natural stone and CMUs.
• The composite system does not require to be painted for UV protection
• The composite system can be in a variety of climate conditions from 40°F (5°C) to
95°F (35 °C)
• Composite systems provides visual prediction of potential failure through cracking
and slippage of fibers.
• Easy and safe to apply. Applicators do not need respirators and googles. Tools can
be cleaned with water.
Packaging
RUREDIL XMESH C10 carbon fiber is shipped in rolls, 3.28 ft (1 meter) wide and 49.21 ft (15 m)
long corresponding approximately to 161,45 ft2 (15 m2) surface. Ruredil may be pre-cut the
fabric upon request.
RUREDIL X MORTAR 25 is available in 55 lb (25 kg) polyethylene-lined bags
Adhesive Mix Ratio
1 bag of RUREDIL X MORTAR 25 requires 1.6 gal (6.5 L) to 1.8 gal (7 L) of water .
Coverage
1 roll of RUREDIL XMESH C10 carbon fiber has 160 ft2 (15 m2) surface that approximately
requires five 55 lb (25 kg) bags of RUREDIL X MORTAR 25.
Surface yield of RUREDIL X MORTAR 25 is 32 ft2 (3 m2) per 55 lb (25 kg) bag at 1/6 in (4mm)
thickness.
Storage
Store RUREDIL XMESH C10 carbon fiber indoors in a cool, dry area away from direct sunlight
and moisture. Protect the fabric from flame or other hazards.
Store RUREDIL X MORTAR 25 adhesive indoors in a dry area at temperatures between 40 to
95°F (5 to 35°C). Do not store opened bags. Use up the whole package once it has been
opened.
Shelf Life
RUREDIL XMESH C10 carbon fiber: 10 years in proper storage conditions
RUREDIL X MORTAR 25 adhesive: 24 months in sealed bags
VOC Content
0 g/L
2/6
RUREDIL X MESH C10
Structural
Reinforcement
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
.....................15.Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.

3. 3/6
RUREDIL X MESH C10
Structural
Reinforcement
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
..................015.Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.
PROPERTY TYPICAL TEST VALUE TEST METHOD
Compressive Strength
7 days: 2,790 psi (19.3 MPa)
ASTM C109
28 days: 3,500 psi (24.1 MPa)
Flexural Strength 28 days: 507 psi (3.5 MPa) UNI EN 196-1 (ASTM C78)
Modulus of Elasticity 28 days: 1,052 ksi (7253 MPa) UNI EN 13412 (ASTM C469)
Length Change 0.122% at 28 days – air cure ASTM C157
PROPERTY TYPICAL TEST VALUE
Tensile strength 695 ksi (4,800 MPa)
Modulus Elasticity 34,810 ksi (240 GPa)
Elongation 1.8%
Nominal Thickness of Carbon Section at 0° and 90 ° 0.002 in (0.047 mm)
Density 113.6 lb/ft3
(1.82 g/cm3
)
Weight of the Fibers 4.9 oz/yd2
(168 g/m2
)
TECHNICAL DATA
Typical RUREDIL XMESH C10 Carbon Fiber Properties
Results may differ upon mixing methods and equipment, temperature, application methods, site and
curing conditions.
RUREDIL X MORTAR 25 Cement-Adhesive Properties
Design Values for Engineers and Architects
Based on the experimentation conducted in accordance with AC434 for the attainment of the
Research Report ICC-ES ESR-2013, the values to be used for design of strengthening applications are
listed in the tables below.
The strengthening design of concrete and masonry structures should be conducted in accordance
with the provisions of ACI 549.4R-13 “Guide to Design and Construction of Externally Bonded Fabric-
Reinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry
Structures.” In addition to the methodology for design, ACI 549.4R-13 stipulates various limitations
including: stress in the steel if existing, reinforcement stress due to creep rupture and fatigue, and
reinforcement tensile strains as well as overall strength reduction factors.
Material Characteristics of Carbon FRCM RUREDILX MESH C10
Material properties of the FRCM composites for design purposes per ACI 549.4R-13 guidelines are
tensilemodulusofelasticityofcrackedspecimen,compositeultimatetensilestrength,andcomposite
ultimate tensile strain. Material properties of the Carbon FRCM system obtained per AC434 are given
in the following table.
PROPERTY SYMBOL UNIT MEAN STD
Ultimate Tensile Strength ffu MPa (Ksi) 1,031 (149.53) 54 (7.83)
Ultimate Tensile Strain efu
mm/mm 0.0100 0.0014
Modulus of Elasticity of
Cracked specimen Ef
GPa
(msi)
79.73 (11.56) 18.44 (2.67)

4. RUREDIL X MESH C10
4/6
Structural
Reinforcement
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
................015.Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.
HOW TO USE
Design
RUREDIL XMESH C10 strengthening system should be designed to meet the specific project
design requirements. Ruredil provides engineering exploratory design at no obligation.
Installation
RUREDIL XMESH C10 must be applied in strict compliance with the installation instructions
reported in this Technical Data Guide by trained applicators approved by Ruredil.
Surface Preparation
•Masonry substrate must be structurally sound. Pointing mortar must be fully cured (28 days).
•Masonry surface must be clean, free of any treatments, such as plasters, primers, etc. that may
affect the adhesion of RUREDIL RUREDIL XMESH C10 C10 strengthening system.
•Acceptable surface preparation methods include sandblasting and low-pressure water jet
cleaner with brushing.
•In presence of macroscopic defects deeper than 1/4 in (6.3 mm), the substrate must be
regularized using RUREWALL T Structural from Ruredil or equivalent product based on
hydraulic binder preferably with pozzolan characteristics. Cure not less than 24 hours before
applying RUREDIL RUREDIL XMESH C10 C10 strengthening system. Do not trowel the surface
of the repair material to a smooth finish.
•Always round corners to at least a ½ in. radius. Internal corners should be smoothed by
troweling.
•Ruredil staff will provide proper specifications and details based on the project requirements.
Mixing
•Precondition RUREDIL X MORTAR 25 pozzolan-based adhesive to 70°F (21°C) before mixing.
•Mix in a pail using hand-held slow-speed drill and a paddle pail. Alternatively use a mortar
mixer with a rotating drum. Do not mix by hand.
•Pour potable water into mixer. Use a maximum of 1.7 gal (6.3 L) of water per 55 lb (25 kg) bag
of RUREDIL X MORTAR 25. Do not deviate from the recommended water content.
•Add the powder to the water while continuously mixing for a minimum of 2 minutes.
•Add a maximum of 1.5 pint (0.7 L) of water and mix for additional 2 minutes. Total quantity of
water should not exceed 1.9 gal (7 L)
•Let the mix rest for 2-3 minutes
•Mix again for 2-3 minutes.
•RUREDIL X MORTAR 25 adhesive should be lump-free before application.
Application
•Dampen the substrate. In case of high ambient temperatures and/or low RH, mist the
substrate frequently during the application so to prevent early drying out of the adhesive.
•Remove standing water before application.
•Cut RUREDIL XMESH C10 as necessary. Use normal scissors.
•Apply RUREDIL X MORTAR 25 adhesive over the masonry substrate with a steel trowel at a
thin thickness of 1/6 in (4 mm).
•Lay RUREDIL XMESH C10 over the adhesive with orientation of 0°/90° with respect to the
ground level or masonry set line. Lightly press RUREDIL XMESH C10 into the adhesive. Each
sheet of RUREDIL XMESH C10 must be totally encapsulated in the thickness of RUREDIL X
MORTAR 25 adhesive.
•If the structural design requires two sheets of RUREDIL XMESH C10, add a second layer of
RUREDIL X MORTAR 25 adhesive at 1/8 to 1/6 in (3 to 4 mm) thickness, a second sheet of
RUREDIL XMESH C10 and embed it into the thickness of the adhesive.Repeat the sequence

5. RUREDIL X MESH C10
5/6
as specified by the designer. Usually RUREDIL RUREDIL XMESH C10 C10 composite system
requires from 1 to 3 sheets of RUREDIL XMESH C10.
•When multiple layers are applied, alternate the 0°/90° orientation with the +45°/-45°
orientation (diagonally to the previous mesh layer) unless required differently by the
designer.
•Complete the installation adding a final layer of RUREDIL X MORTAR 25 adhesive at 1/8 in
(3 mm) thickness so as to encapsulate the final sheet of RUREDIL XMESH C10.
•Each layer of RUREDIL X MORTAR 25 adhesive must be applied when the previous layer is
still wet and has not hardened.
•If the surface of RUREDIL X MORTAR 25 adhesive has hardened, sandblast before
applying a new layer of adhesive.
•When the application is interrupted, all required sheets of RUREDIL XMESH C10 must
have been applied.
•RUREDIL XMESH C10 must be lapped 6 inches minimum.
•RUREDIL X MORTAR 25 must be applied from 40 to 95°F (4 to 35°C). Follow ACI 305 and
306 for application in hot and cold weather.
Curing
In hot and dry weather conditions and/or in presence of wind, the surface of RUREDIL
X MORTAR 25 adhesive must be protected with CURING S from Ruredil or equivalent
product. The curing compound must be suitable for applications on wet hydraulic
mortars in order to reduce water evaporation
Clean up
Clean tools with water immediately after use. Cured material must be removed
mechanically.
Limitations
• RUREDIL RUREDIL X MESH C10 composite system cannot be applied over metal
surfaces
• RUREDIL X MESH C10 composite system cannot be used for strengthening wooden
piles
• Do not exceed the recommended application thickness for RUREDIL X MORTAR 25
more than 1/6 in. (4 mm)
• RUREDIL X MORTAR 25 must be protected from rain, even light rain, during
application
• RUREDIL X MORTAR 25 should not be applied in hot temperature higher than 95°F
(35°C) or with moderate or strong winds
• RUREDIL X MORTAR 25 cannot be spray applied. It can only be applied by trowel.
• RUREDIL X MORTAR 25 cement-based adhesive cannot be used for masonry
pointing.
• Do not use RUREDIL X MORTAR 25 as a repair mortar. If repair is necessary before
the application of RUREDIL XMESH C10 strengthening system, use RUREWALL
T Structural from Ruredil or equivalent product based on hydraulic binder with
pozzolan characteristics.
• Do not mix partial bags of RUREDIL X MORTAR 25.
• Do not mix RUREDIL X MORTAR 25 by hand.
• Do not add plasticizers, accelerators, retarders, or other additives to RUREDIL X
MORTAR 25.
• For professional use only.
• Make sure that the most current version of the product data sheet and SDS are being
used. Contact Ruredil at export@ruredil.it for information.
• Proper application is the responsibility of the user. Ruredil’s personnel make technical
recommendations but do not supervise job site applications
Structural
Reinforcement
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
................5.Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.

6. RUREDIL X MESH C10
6/6
Chemical/physical
specifications:
Mesh length: 15 m ± 3%
Composition:
Carbon fiber mesh.
Definition of performance:
Bi-directional carbon mesh for structural reinforcements with
inorganic base of masonry structures.
Our company is certified according to UNI EN ISO 9001:2008 standard by ICMQ and Certiquality for the “Design, production and trade of chemical and special products for the building sector.” Our quality system is based on the sale
through catalog, a contractual tool between our Company and Customers. Ruredil, with this tool, guarantees to its Customers that the product to be delivered complies with the specific chemical and physical properties specified
in this catalog sheet.This sale relieves us from the issuance of the certificate of analysis which, by its nature, only guarantees the performance of a specific supply.
Our company is certified according to UNI EN ISO 9001:2008 standard by ICMQ and Certiquality for the “Design, production and trade of chemical and special products for the building sector.” Our quality system is based on the sale
through catalog, a contractual tool between our Company and Customers. Ruredil, with this tool, guarantees to its Customers that the product to be delivered complies with the specific chemical and physical properties specified
in this catalog sheet. This sale relieves us from the issuance of the certificate of analysis which, by its nature, only guarantees the performance of a specific supply.
Packaging
15 m2
rolls (length 15 m, height
100 cm)
Consumption:
To consider a web overlap of
approx. 10 cm on the junctions.
.........12
CATALOGUE SPECIFICATIONS RUREDIL X MESH C10
Code
0109113020
Structural
Reinforcement
Construction chemicals and building technologies
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it
...................Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it.
HEALTH, SAFETY AND ENVIRONMENTAL
Read, understand and follow all Safety Data Sheets and product label information for this
product prior to use. SDS can be obtained by e-mailing a request to export@ruredil.it
Use only as directed.
Statement of Responsibility
The technical information and application advice in this technical data guide is
based on the present state of our best scientific and practical knowledge. As the
nature of the information herein is general, no assumption can be made as to the
product’s suitability for a particular use or application, and no warranty as to its
accuracy, reliability or completeness, either expressed or implied, is given other than
those required by State legislation. The owner, his representative or the contractor
is responsible for checking the suitability of products for their intended use.
Field service, where provided, does not constitute supervisory responsibility.
Suggestions made by Ruredil., either verbally or in writing, may be followed,
modified or rejected by the owner, engineer or contractor since they, and no Ruredil,
are responsible for carrying out procedure appropriate to a specific application.

7. Description
RUREDIL X MORTAR 25 is an adhesive based on pozzolanic cement for bonding RUREDIL X
MESH C10 (carbon fabric) onto masonry surfaces, such as concrete masonry unit (CMU), clay
brick, hollow clay tiles, tuff and natural stone.
It is designed for exclusive use with RUREDIL XMESH C10 composite strengthening system for
masonry construction.
RUREDIL X MORTAR 25 is easy to apply by hand even in challenging conditions due to its high
workability. It is safe for applicators with no offensive odors.
Use
RUREDIL X MORTAR 25 adhesive combines with RUREDIL XMESH C10 (carbon fabric) mesh to
provide RUREDIL X MESH C10 composite system for strengthening of masonry structures. It is
suitable for applications over old stones and bricks in historic masonry preservation.
Applications
CMU, tuff, natural stone, clay brick and hollow clay tile
Historic masonry
Interior and exterior
Vertical and overhead
Product Highlights
Easy to apply by trowel for vertical and overhead applications.
Suitable for applications on rough and irregular masonry surfaces
Only requires potable water for mixing
Can be mixed with a slow-speed drill and paddle or mortar mixer
Can be applied on damp surfaces as long as there is no standing water
Does not alter the response structural elements to fire thus allowing indoor
applications of RUREDIL X MESH C10 composite strengthening system without fire
protection
Not affected by salt water
Water vapor permeable
Very limited, if no shrinkage
Resistant to freeze-thaw cycles
RUREDIL X MORTAR 25 has similar compressive strength and modulus of elasticity
as most of the masonry materials, thus facilitating stress-strain transfer between the
adhesive and the substrate
100% solvent free
Ruredil
Technicalinfo
1/5
RUREDIL X MORTAR 25
Pozzolan-based Hydraulic Binder Adhesive for
Use in Combination with Carbon Fiber Mesh in
RUREDIL X MESH C10 Composite Strengthening
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
export@ruredil.it - www.ruredil.it Construction chemicals and building technologies
.....................Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it

8. Packaging
55 lb (25 kg) polyethylene-lined bags
Adhesive Mix Ratio
1 bag of RUREDIL X MORTAR 25 requires 1.6 gal (6.5 L) to 1.8 gal (7 L) of water.
Coverage
32 ft2 (3 m2) for 1/6 in (4mm) thickness per 55 lb (25 kg) bag.
Storage
Store indoors in a dry area at temperatures between 40 to 95°F (5 to 35°C).
Do not store opened bags. Use up the whole package once it has been opened.
Shelf Life
24 months in sealed bags
VOC Content
0 g/L
Technical Data
Results may differ upon mixing methods and equipment, temperature, application
methods, site and curing conditions.
2/5
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
Construction chemicals and building technologies
RUREDIL X MORTAR 25
Structural
Reinforcement
export@ruredil.it - www.ruredil.it
.....................Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it
PROPERTY TYPICAL TEST VALUE TYPICAL TEST VALUE
Application Life
Approximately 45 minutes at 70° F (21° C)
after adding powder to the water UNI EN 1015-9
Fresh Wet Density 93.6 lb/ft3 (1.5) g/cm3 UNI EN 1015-6
Flow 165 mm (6.5 in.) UNI EN 13395-1
Compressive Strength
7 days: 2,790 psi (19.3 MPa)
28 days: 3,500 psi (24.1 MPa) ASTM C109
Flexural Strength 28 days: 507 psi (4.0 MPa) UNI EN 196-1 (ASTM C78)
Modulus of Elasticity 28 days: 1,052 ksi (6,998 MPa) UNI EN 13412 (ASTM C469)
Length Change 0.122% at 28 days – air cure ASTM C157
How to use
Installation
RUREDILXMORTAR25 mustbeappliedforRUREDILXMESHC10 strengtheningapplications
by contractors that are trained and approved by Ruredil.
Surface preparation
Masonrysubstratemustbestructurallysound.Pointingmortarmustbefullycured(28days).
Masonry surface must be clean, free of any treatments, such as plasters, primers, etc. that
may affect the adhesion with RUREDIL X MORTAR 25.
Acceptable surface preparation methods include sandblasting and low-pressure water jet
cleaner with brushing.
In presence of macroscopic defects deeper than 1/4 in (6.3 mm), the substrate must be
regularized using RUREWALL T Structural from Ruredil or equivalent product based on the
hydraulic binder with pozzolan characteristics.

9. 3/5
The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
Construction chemicals and building technologies
RUREDIL X MORTAR 25
Structural
Reinforcement
export@ruredil.it - www.ruredil.it
...........Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it
Mixing
Precondition to 70°F (21°C) before mixing.
Mix in a pail using hand-held slow-speed drill and a paddle. Alternatively use a mortar
mixer with a rotating drum. Do not mix by hand.
Pour potable water into mixer. Use a maximum of 1.7 gal (6.3 L) of water per 55 lb
(25 kg) bag of RUREDIL X MORTAR 25. Do not deviate from the recommended water
content.
Add the powder to the water while continuously mixing for a minimum of 2 minutes.
Add a maximum of 1.5 pint (0.7 L) of water and mix for 2 minutes. Total quantity of
water should not exceed 1.9 gal (7 L)
Let the mix rest for 2-3 minutes
Mix again for 2-3 minutes.
RUREDIL X MORTAR 25 should be lump-free before application.
Application
Dampen the substrate. In case of high ambient temperatures and/or low RH, mist
the substrate frequently during the application so to prevent early drying out of the
adhesive.
Remove standing water before application.
Apply RUREDIL X MORTAR 25 by trowel, preferably using a steel trowel. RUREDIL X
MORTAR 25 cannot be sprayed.
Apply RUREDIL X MORTAR 25 as part of RUREDIL RUREDIL XMESH C10 C10 composite
strengthening system in order to encapsulate the carbon fiber mesh and bond it
onto the masonry substrate. Be sure to apply RUREDIL X MORTAR 25 in thin layers not
exceeding 1/6 in. (4 mm) thickness.
Do not use RUREDIL X MORTAR 25 as a point mortar or to repair imperfections of the
substrate deeper than 1/4 in (6.3 mm).
RUREDIL X MORTAR 25 must be applied in the temperature range of 40 to 105°F (5 to
40°C). Follow ACI 305 and 306 for application in hot and cold weather
Curing
In hot and dry weather conditions and/or in presence of wind, the surface of RUREDIL X
MORTAR 25 must be protected with CURING S from Ruredil or an equivalent product. The
curing compound must be suitable for applications on wet hydraulic mortars in order to
reduce water evaporation.
Clean up
Clean tools with water immediately after use. Cured material must be removed
mechanically.
Limitations
Use RUREDIL X MORTAR 25 as a component of RUREDIL X MESH C10.
Do not use RUREDIL X MORTAR 25 as a repair mortar. If repair is necessary before the
application of RUREDIL X MESH C10 strengthening system, use RUREWALL T Structural
from Ruredil or equivalent product based on hydraulic binder preferably with pozzolan
characteristics
RUREDIL X MORTAR 25 adhesive must be applied in a thin layer, not thicker than 1/6
in. (4 mm).
RUREDIL X MORTAR 750 cannot be sprayed. It can only be applied by trowel.

10. The information contained in this technical info sheet is based on our knowledge and experience, and cannot be considered to represent a guarantee
on our part, or an acceptance of responsibility for use of our products, as conditions of use are beyond our control
Do not add sand, fine aggregate, or Portland cement to RUREDIL X MORTAR 25
Do not mix RUREDIL X MORTAR 25 by hand.
Do not deviate from the amount of water recommended in this product data sheet.
Protect the application during the first 24-48 hours after completing the installation in
conditions, such as high ambient temperature and low RH that can cause rapid drying of
RUREDIL X MORTAR 25 cement-based adhesive.
When mixing or placing in a closed area, provide adequate ventilation
For professional use only
Make sure that the most current version of the product data sheet and SDS are being
used. Contact Ruredil at export@ruredil.it for information
Proper application is the responsibility of the user. Ruredil personnel make technical
recommendations but do not supervise job site applications.
Health, safety and environmental
Read, understand and follow all Safety Data Sheets and product label information for this
product prior to use. SDS can be obtained by e-mailing a request to export@ruredil.it
Use only as directed.
Statement of responsibility
Thetechnicalinformationandapplicationadviceinthistechnicaldataguideisbasedonthe
presentstateofourbestscientificandpracticalknowledge.Asthenatureoftheinformation
herein is general, no assumption can be made as to the product’s suitability for a particular
use or application, and no warranty as to its accuracy, reliability or completeness, either
expressed or implied, is given other than those required by State legislation. The owner,
his representative or the contractor is responsible for checking the suitability of products
for their intended use. Field service, where provided, does not constitute supervisory
responsibility. Suggestions made by Ruredil., either verbally or in writing, may be followed,
modified or rejected by the owner, engineer or contractor since they, and not Ruredil, are
responsible for carrying out procedure appropriate to a specific application.
4/5
Construction chemicals and building technologies
RUREDIL X MORTAR 25
Structural
Reinforcement
export@ruredil.it - www.ruredil.it
.............................Thiseditioncancelsandreplacesallpreviouseditions.
Thesafetydatasheetandtechnicalspecificationsmaybedownloadedfromwww.ruredil.it
Chemical/physical
specifications:
Density ():
specific gravity (fresh mortar):
1,50 ± 0,05 g/cc
Consistency: 165 mm ± 10
Compliant with the UNI EN
998-2 standard
Composition:
Stabilized pozzolanic inorganic matrix.
Definition of performance:
Stabilized pozzolanic inorganic matrix for FRCM structural
reinforcements of masonry buildings and structures.
Our company is certified according to UNI EN ISO 9001:2008 standard by ICMQ and Certiquality for the “Design, production and trade of chemical and special products for the building sector.” Our quality system is based on the sale
through catalog, a contractual tool between our Company and Customers. Ruredil, with this tool, guarantees to its Customers that the product to be delivered complies with the specific chemical and physical properties specified
in this catalog sheet.This sale relieves us from the issuance of the certificate of analysis which, by its nature, only guarantees the performance of a specific supply.
Code
0105033020
Packaging
25 kg bags
Yield:
6 bags for 1 mesh roll
CATALOGUE SPECIFICATIONS RUREDIL X MORTAR 25