This year's HSE Report had a makeover. Not only a look & feel to fit our new 'Be sure.' branding, yet also providing more in-depth views on trends and developments in the fields of energy and resources and how these relate to Teijin Aramid and our sustainability drive.
Apresentação feita por Henrique Petersen Paiva, Gerente de Sustentabilidade da Siemens Brasil e Diretor Executivo da Fundação Siemens Brasil, no Ciclo de Sustentabilidade em São Paulo no bloco "Compras de serviços e produtos por empresas que estão no movimento da sustentabilidade".
The document discusses the company's strategy to develop efficient on-site renewable energy generation. The strategy has three parts: 1) reducing their direct carbon footprint, 2) working with suppliers to reduce emissions, and 3) empowering customers to reduce their carbon footprint. They discuss trials of various renewable technologies for on-site generation including solar, wind, biomass, and combined heat and power. The appropriate technology depends on factors like the scale, financial impacts, and proven effectiveness. A mix of technologies is needed for different locations. Government incentives can help drive more efficient on-site generation.
Stop CO2 was founded with the intent to accelerate the implementation of technologies, services and products
with low energy footprint and environmental impact for individuals, companies and public bodies.
Stop CO2 promotes an intensive use of renewable energy sources in line with the principle of distributed generation
and with international protocols for the fight against Climate Change.
Stop CO2 is a proud member of the Camden Climate Change Alliance.
Oportunidades para el sector privado en el marco de la ecoeficiencia. Casos e...Libelula
Oportunidades para el sector privado en el marco de la ecoeficiencia. Casos exitosos alrededor del mundo.
Presentado por Alessandro Casoli, Asociado Estratégico en Política y Mercados - The Carbon Trust.
Milling and Grain journalist Roger Gilbert reports on the predictions made by Mr Harm Klein, from Tebodin Netherlands BV an international operating consultancy and engineering firm.
Green Energy Consulting - It's Good to be Green - KL (3)David Blake
Green Energy Consulting is a UK energy consultancy that specializes in energy procurement, sustainability, and consumption reduction strategies. They offer a range of services including energy management, carbon management, water auditing, energy procurement, and sustainability certification. Their goal is to help clients reduce energy expenditures, access bespoke services, and increase their green credentials through practical solutions.
Green Energy Consulting - It's Good to be GreenSteph Harwood
Green Energy Consulting is a UK energy consultancy that specializes in energy procurement and sustainability. They help clients reduce energy expenditures, access bespoke services, and increase social and environmental responsibility. Their services include energy management, carbon management, water auditing, energy procurement, sustainability management, and helping clients enhance their green credentials. They work to identify affordable green solutions and provide ongoing management support to help clients save time, energy, and money on their energy needs.
Apresentação feita por Henrique Petersen Paiva, Gerente de Sustentabilidade da Siemens Brasil e Diretor Executivo da Fundação Siemens Brasil, no Ciclo de Sustentabilidade em São Paulo no bloco "Compras de serviços e produtos por empresas que estão no movimento da sustentabilidade".
The document discusses the company's strategy to develop efficient on-site renewable energy generation. The strategy has three parts: 1) reducing their direct carbon footprint, 2) working with suppliers to reduce emissions, and 3) empowering customers to reduce their carbon footprint. They discuss trials of various renewable technologies for on-site generation including solar, wind, biomass, and combined heat and power. The appropriate technology depends on factors like the scale, financial impacts, and proven effectiveness. A mix of technologies is needed for different locations. Government incentives can help drive more efficient on-site generation.
Stop CO2 was founded with the intent to accelerate the implementation of technologies, services and products
with low energy footprint and environmental impact for individuals, companies and public bodies.
Stop CO2 promotes an intensive use of renewable energy sources in line with the principle of distributed generation
and with international protocols for the fight against Climate Change.
Stop CO2 is a proud member of the Camden Climate Change Alliance.
Oportunidades para el sector privado en el marco de la ecoeficiencia. Casos e...Libelula
Oportunidades para el sector privado en el marco de la ecoeficiencia. Casos exitosos alrededor del mundo.
Presentado por Alessandro Casoli, Asociado Estratégico en Política y Mercados - The Carbon Trust.
Milling and Grain journalist Roger Gilbert reports on the predictions made by Mr Harm Klein, from Tebodin Netherlands BV an international operating consultancy and engineering firm.
Green Energy Consulting - It's Good to be Green - KL (3)David Blake
Green Energy Consulting is a UK energy consultancy that specializes in energy procurement, sustainability, and consumption reduction strategies. They offer a range of services including energy management, carbon management, water auditing, energy procurement, and sustainability certification. Their goal is to help clients reduce energy expenditures, access bespoke services, and increase their green credentials through practical solutions.
Green Energy Consulting - It's Good to be GreenSteph Harwood
Green Energy Consulting is a UK energy consultancy that specializes in energy procurement and sustainability. They help clients reduce energy expenditures, access bespoke services, and increase social and environmental responsibility. Their services include energy management, carbon management, water auditing, energy procurement, sustainability management, and helping clients enhance their green credentials. They work to identify affordable green solutions and provide ongoing management support to help clients save time, energy, and money on their energy needs.
European Green IT Webinar 2014 - MicroPro Computers (Ireland)GreenLabCenter
This document discusses MicroPro, an Irish company that designs and manufactures eco-friendly computers. It summarizes MicroPro's history since 1991 developing modular, upgradable, and recyclable computer models like the iameco v1, v3, and D4R laptop. These models are designed for longer lifespans, using recycled materials, and are ISO14001 and ISO9001 certified. The document also discusses barriers to marketing sustainable computers, opportunities for further product improvements through research partnerships, and MicroPro's current and proposed R&D projects focused on eco-innovation and the circular economy.
The document discusses sustainability practices in the casting and forging sector. It notes that the industry is energy intensive, produces greenhouse gas emissions, and impacts the environment through mining. It then lists some of the major players in the sector and discusses both issues caused by the industry, such as carbon emissions and use of non-renewable resources, and sustainability initiatives companies are taking, such as using biofuels, recycled water, and implementing waste reduction practices. Finally, it provides some examples of sustainability efforts by specific companies in the sector, like green building principles and environmentally sustainable transportation solutions.
A.T.E. provides innovative clean technology solutions for industries and buildings, including energy efficient comfort air conditioning, water and wastewater management, and remote monitoring. Some key products and services mentioned are HMX Ambiator and PCU units for comfort cooling, wastewater treatment plants, pumping solutions, and SuperAxis for remote equipment monitoring. The company aims to develop original technologies through in-house R&D to provide eco-friendly options that improve efficiency and reduce costs over the lifecycle.
“Ultra-Low Emission vs. Ultra-Low Energy Vehicles in the UK market: A Busines...Gavin Harper
This document summarizes a presentation about ultra-low emission and ultra-low energy vehicles in the UK market from a business model perspective. It discusses how personal mobility remains popular despite challenges to modal shift. It also covers how the bulk of vehicle impact occurs during use, and focuses on emissions at the point of use. Business models of regimes like large automakers are compared to niches like smaller firms. Factors like key partners, activities, resources, propositions, and relationships are examined between the two. Examples of business models are provided, including how lightweighting can be a differentiation. The Riversimple model for low energy vehicles is also briefly mentioned.
North America Utility Industry 2009 Top 10 PredictionsRick Nicholson
The document provides 10 predictions for the North American utility industry in 2009. It predicts that energy efficiency will become the top priority for utilities due to demand growth and policy mandates. Renewable energy growth will slow in 2009 but rebound in 2010 due to policy support. Utilities will emphasize distributed energy to support the grid. Intelligent grid technology spending will reach $70 billion by 2013. Web portals will be the fastest way for consumers to manage energy. Energy trading investment will decrease. Generators will focus on managing carbon exposure. Water scarcity and technology will impact the water market. Gas utilities will be hit harder than electric utilities by the recession. Overall US utility IT spending growth will decrease to 1.9% in 2009.
The E P&L is a pioneering tool to help businesses manage their relationship with the natural environment. All businesses rely on natural capital to deliver their products and services. However, as a result of their activities, businesses also impact the environment through their use of land and natural resources and their emissions to air, discharges to water and waste.
Kering developed the E P&L to help measure and understand its impact on natural capital across its supply chain, from raw materials to the delivery of products to customers.
KapStone's 2013 sustainability report summarizes their environmental, social and economic impacts for 2013. It outlines their 2020 sustainability goals which include reducing recordable incident rates by 70%, achieving 100% chain-of-custody fiber certification, and reducing energy usage, greenhouse gas emissions, criteria air emissions and water usage per ton of production by 10-25%. The report discusses KapStone's progress in 2013 including a 37% reduction in incident rates and 75% chain-of-custody certification with plans to achieve full certification by 2014.
The presentation of Professor Greg Norris, adjunct lecturer of Harvard and chief scientist of Living Future Institute in the workshop of Carbon Game –event. It was organised by Sitra in collaboration with Climate Partners and SYKE. In the event the definition and rules of carbon neutrality were discussed as well as how carbon neutrality is seen in business both in Finland and globally.
See also the separate presentations of the event by Katriina Alhola and Jáchym Judl (SYKE) and Professor Greg Norris.
The What and How of the Circular EconomyAntea Group
Antea Group Senior Consultant Pamela Gordon presented at a recent Women's Environmental Network (WEN) event on what the Circular Economy is, how it impacts business and the environment, why we care, and how we can participate in the Circular Economy in our homes, in our communities, and in our organizations.
This document summarizes sustainability practices of several compressor manufacturers and suppliers. It describes how Atlas Copco, Gardner Denver, and Ingersoll Rand have implemented various sustainability initiatives to reduce their environmental impact, promote ethical business practices, invest in safety and health, and engage with stakeholders. It provides specific examples of goals and programs around reducing emissions, improving energy efficiency, sustainable sourcing, and community engagement. Performance metrics are presented on the companies' energy usage, greenhouse gas emissions, waste management, and other factors from 2010-2014.
From Metrics, to Tactics, to Strategy: Embedding Sustainability across the Va...Sustainable Brands
Thomas Odenwald, Senior Vice President, SAP
When it comes to building an informed sustainability roadmap, how should a company move from metrics, to tactics, to strategy? What companies are embedding sustainability across their entire value chain, and how are they leveraging the existing system infrastructure as a central part of the solution?
This document summarizes efforts to commercialize graphene and 2D materials. It discusses two key organizations:
1) Graphene@Manchester works to accelerate commercialization by supporting startups, SMEs, and large companies with expertise and access to facilities.
2) The National Graphene Institute focuses on academic research (TRL 1-5) in partnership with industry, while the Graphene Engineering Innovation Centre focuses on industry-led technology development (TRL 3-6) in collaboration with academia.
The document outlines the stages of moving materials from initial research to commercial products and applications, including increasing manufacturing scale and characterization, and developing prototypes for integration and validation with end users.
Carbon neutrality provides several benefits for businesses, including cost savings from increased energy and resource efficiency, strengthened reputation from reduced emissions, and new business opportunities. While carbon neutrality is a long-term strategic target, companies communicate about sustainability targets and developing low-carbon products. Carbon neutrality can be achieved through investing in local renewable energy production rather than just offsetting emissions, providing opportunities for companies to offer renewable energy products to customers. Positive impacts from products that help customers reduce emissions, known as positive handprint, can exceed a company's own footprint and be considered when aiming for carbon neutrality. Both companies and society must work together to develop carbon neutrality through financial support, common rules and definitions, and innovative policies.
SPLC 2019 Summit: Can Your Purchases Reverse Global Warming?SPLCouncil
Slides from Lisa Conway, VP Sustainability, Americas, Interface; Tim Hopper, Responsible Sourcing Manager, Microsoft; Kirsten Ritchie, Principal, Director of Sustainable Design, Gensler; Stacy Smedley, Director of Sustainability, Skanska; presented at the Sustainable Purchasing Leadership Council’s 2019 Summit in Portland, OR.
Footprint provides an energy monitoring system for existing buildings. It measures the consumption of energy resources regarding the environment. Do visit us for services.
Sustainable Times Issue 9
The vast majority of businesses say that sustainability is vital to their future prosperity, but almost half say that margins are currently lower on sustainable products and services, according to an international survey of 250 senior executives by Accenture.
This document discusses green supply chain management. It begins by defining supply chain management and green supply chain management. It then discusses the benefits of green SCM such as improved operations and agility. It provides examples of companies that have implemented successful green SCM initiatives. It also discusses why green SCM is needed due to issues like global warming, corporate social responsibility, and evolving consumer demand. Finally, it discusses areas that can be targeted for greening the supply chain such as product design, material sourcing, and reverse logistics.
StopCO2 is an organization that helps companies improve energy efficiency and sustainability through various services including energy audits, monitoring and control systems, sustainable product development, and risk management. Their services are designed to help companies reduce energy costs by up to 50%, lower carbon emissions, gain competitive advantages, and comply with environmental standards.
This document discusses supply base collaboration programs that enable large corporations to bring thousands of their supplier companies together online. This allows suppliers to unlock shared value through group procurement of solutions, track outcomes, and reduce costs through lower waste, water and energy. Working with clients like Asda-Walmart, Tesco and GSK, these programs are driving efficiencies and reducing environmental impacts while developing strong supply bases.
European Green IT Webinar 2014 - MicroPro Computers (Ireland)GreenLabCenter
This document discusses MicroPro, an Irish company that designs and manufactures eco-friendly computers. It summarizes MicroPro's history since 1991 developing modular, upgradable, and recyclable computer models like the iameco v1, v3, and D4R laptop. These models are designed for longer lifespans, using recycled materials, and are ISO14001 and ISO9001 certified. The document also discusses barriers to marketing sustainable computers, opportunities for further product improvements through research partnerships, and MicroPro's current and proposed R&D projects focused on eco-innovation and the circular economy.
The document discusses sustainability practices in the casting and forging sector. It notes that the industry is energy intensive, produces greenhouse gas emissions, and impacts the environment through mining. It then lists some of the major players in the sector and discusses both issues caused by the industry, such as carbon emissions and use of non-renewable resources, and sustainability initiatives companies are taking, such as using biofuels, recycled water, and implementing waste reduction practices. Finally, it provides some examples of sustainability efforts by specific companies in the sector, like green building principles and environmentally sustainable transportation solutions.
A.T.E. provides innovative clean technology solutions for industries and buildings, including energy efficient comfort air conditioning, water and wastewater management, and remote monitoring. Some key products and services mentioned are HMX Ambiator and PCU units for comfort cooling, wastewater treatment plants, pumping solutions, and SuperAxis for remote equipment monitoring. The company aims to develop original technologies through in-house R&D to provide eco-friendly options that improve efficiency and reduce costs over the lifecycle.
“Ultra-Low Emission vs. Ultra-Low Energy Vehicles in the UK market: A Busines...Gavin Harper
This document summarizes a presentation about ultra-low emission and ultra-low energy vehicles in the UK market from a business model perspective. It discusses how personal mobility remains popular despite challenges to modal shift. It also covers how the bulk of vehicle impact occurs during use, and focuses on emissions at the point of use. Business models of regimes like large automakers are compared to niches like smaller firms. Factors like key partners, activities, resources, propositions, and relationships are examined between the two. Examples of business models are provided, including how lightweighting can be a differentiation. The Riversimple model for low energy vehicles is also briefly mentioned.
North America Utility Industry 2009 Top 10 PredictionsRick Nicholson
The document provides 10 predictions for the North American utility industry in 2009. It predicts that energy efficiency will become the top priority for utilities due to demand growth and policy mandates. Renewable energy growth will slow in 2009 but rebound in 2010 due to policy support. Utilities will emphasize distributed energy to support the grid. Intelligent grid technology spending will reach $70 billion by 2013. Web portals will be the fastest way for consumers to manage energy. Energy trading investment will decrease. Generators will focus on managing carbon exposure. Water scarcity and technology will impact the water market. Gas utilities will be hit harder than electric utilities by the recession. Overall US utility IT spending growth will decrease to 1.9% in 2009.
The E P&L is a pioneering tool to help businesses manage their relationship with the natural environment. All businesses rely on natural capital to deliver their products and services. However, as a result of their activities, businesses also impact the environment through their use of land and natural resources and their emissions to air, discharges to water and waste.
Kering developed the E P&L to help measure and understand its impact on natural capital across its supply chain, from raw materials to the delivery of products to customers.
KapStone's 2013 sustainability report summarizes their environmental, social and economic impacts for 2013. It outlines their 2020 sustainability goals which include reducing recordable incident rates by 70%, achieving 100% chain-of-custody fiber certification, and reducing energy usage, greenhouse gas emissions, criteria air emissions and water usage per ton of production by 10-25%. The report discusses KapStone's progress in 2013 including a 37% reduction in incident rates and 75% chain-of-custody certification with plans to achieve full certification by 2014.
The presentation of Professor Greg Norris, adjunct lecturer of Harvard and chief scientist of Living Future Institute in the workshop of Carbon Game –event. It was organised by Sitra in collaboration with Climate Partners and SYKE. In the event the definition and rules of carbon neutrality were discussed as well as how carbon neutrality is seen in business both in Finland and globally.
See also the separate presentations of the event by Katriina Alhola and Jáchym Judl (SYKE) and Professor Greg Norris.
The What and How of the Circular EconomyAntea Group
Antea Group Senior Consultant Pamela Gordon presented at a recent Women's Environmental Network (WEN) event on what the Circular Economy is, how it impacts business and the environment, why we care, and how we can participate in the Circular Economy in our homes, in our communities, and in our organizations.
This document summarizes sustainability practices of several compressor manufacturers and suppliers. It describes how Atlas Copco, Gardner Denver, and Ingersoll Rand have implemented various sustainability initiatives to reduce their environmental impact, promote ethical business practices, invest in safety and health, and engage with stakeholders. It provides specific examples of goals and programs around reducing emissions, improving energy efficiency, sustainable sourcing, and community engagement. Performance metrics are presented on the companies' energy usage, greenhouse gas emissions, waste management, and other factors from 2010-2014.
From Metrics, to Tactics, to Strategy: Embedding Sustainability across the Va...Sustainable Brands
Thomas Odenwald, Senior Vice President, SAP
When it comes to building an informed sustainability roadmap, how should a company move from metrics, to tactics, to strategy? What companies are embedding sustainability across their entire value chain, and how are they leveraging the existing system infrastructure as a central part of the solution?
This document summarizes efforts to commercialize graphene and 2D materials. It discusses two key organizations:
1) Graphene@Manchester works to accelerate commercialization by supporting startups, SMEs, and large companies with expertise and access to facilities.
2) The National Graphene Institute focuses on academic research (TRL 1-5) in partnership with industry, while the Graphene Engineering Innovation Centre focuses on industry-led technology development (TRL 3-6) in collaboration with academia.
The document outlines the stages of moving materials from initial research to commercial products and applications, including increasing manufacturing scale and characterization, and developing prototypes for integration and validation with end users.
Carbon neutrality provides several benefits for businesses, including cost savings from increased energy and resource efficiency, strengthened reputation from reduced emissions, and new business opportunities. While carbon neutrality is a long-term strategic target, companies communicate about sustainability targets and developing low-carbon products. Carbon neutrality can be achieved through investing in local renewable energy production rather than just offsetting emissions, providing opportunities for companies to offer renewable energy products to customers. Positive impacts from products that help customers reduce emissions, known as positive handprint, can exceed a company's own footprint and be considered when aiming for carbon neutrality. Both companies and society must work together to develop carbon neutrality through financial support, common rules and definitions, and innovative policies.
SPLC 2019 Summit: Can Your Purchases Reverse Global Warming?SPLCouncil
Slides from Lisa Conway, VP Sustainability, Americas, Interface; Tim Hopper, Responsible Sourcing Manager, Microsoft; Kirsten Ritchie, Principal, Director of Sustainable Design, Gensler; Stacy Smedley, Director of Sustainability, Skanska; presented at the Sustainable Purchasing Leadership Council’s 2019 Summit in Portland, OR.
Footprint provides an energy monitoring system for existing buildings. It measures the consumption of energy resources regarding the environment. Do visit us for services.
Sustainable Times Issue 9
The vast majority of businesses say that sustainability is vital to their future prosperity, but almost half say that margins are currently lower on sustainable products and services, according to an international survey of 250 senior executives by Accenture.
This document discusses green supply chain management. It begins by defining supply chain management and green supply chain management. It then discusses the benefits of green SCM such as improved operations and agility. It provides examples of companies that have implemented successful green SCM initiatives. It also discusses why green SCM is needed due to issues like global warming, corporate social responsibility, and evolving consumer demand. Finally, it discusses areas that can be targeted for greening the supply chain such as product design, material sourcing, and reverse logistics.
StopCO2 is an organization that helps companies improve energy efficiency and sustainability through various services including energy audits, monitoring and control systems, sustainable product development, and risk management. Their services are designed to help companies reduce energy costs by up to 50%, lower carbon emissions, gain competitive advantages, and comply with environmental standards.
This document discusses supply base collaboration programs that enable large corporations to bring thousands of their supplier companies together online. This allows suppliers to unlock shared value through group procurement of solutions, track outcomes, and reduce costs through lower waste, water and energy. Working with clients like Asda-Walmart, Tesco and GSK, these programs are driving efficiencies and reducing environmental impacts while developing strong supply bases.
Kaufland focuses on sustainability in its fruits and vegetables, environmental protection efforts, and textiles. It aims to minimize pesticide use and promote sustainable cultivation methods for produce. It also uses energy efficient technology and aims to reduce CO2 emissions and power consumption. For textiles, it commits to eliminating harmful chemicals by 2020 and requires suppliers to meet sustainability standards. It collaborates with Greenpeace on reducing water pollution from textile production.
Total SA - Commitment To Better Safer Cleaner Efficient Innovative Accessible...OILWIRE
Supplying affordable energy to a growing population, addressing climate change and meeting new customer expectations are the three main challenges Total must meet as an energy major. That is what guides what we do. With operations in more than 130 countries, we are a top-tier international oil and gas company. We are also a worldclass natural gas operator and a global solar leader through our affiliate SunPower. Our activities span oil and gas production, refining, petrochemicals and marketing. Demonstrating their commitment to better energy, our 100,000 employees help supply our customers worldwide with safer, cleaner, more efficient and more innovative products that are accessible to as many people as possible. Our ambition is to become the responsible energy major.
Little Green Ranger ESG Sustainability ReportKennethOng48
The document is the sustainability report from LGR highlighting their commitments and progress on ESG practices. It discusses how LGR utilizes technology to provide clean energy solutions through solar panels and batteries. It expresses their dedication to sustainability reporting and reducing environmental impacts through decreasing emissions and waste. It provides statistics on their carbon reductions, training programs, and goals to further transition to clean energy and align with net-zero targets by 2050.
Nestle has committed to achieving net zero greenhouse gas emissions by 2050. To accomplish this, Nestle will take actions across its value chain to reduce emissions from sourcing ingredients, manufacturing products, packaging, logistics, and product use. Key plans include sourcing 50% of key ingredients through regenerative agriculture by 2030, using 100% renewable electricity in its operations by 2025, making all packaging recyclable or reusable by 2025, and working with suppliers and customers to reduce emissions. Nestle recognizes that most of its emissions come from its supply chain, so collaborating throughout the value chain will be essential to achieving its net zero goal.
This document is HeidelbergCement's 2015 sustainability report. It discusses the company's strategy and approach to sustainability management. Key points include:
- HeidelbergCement is committed to responsible corporate governance and aims to achieve business objectives in an ethical manner.
- Compliance with laws and international standards is a priority, and the company has a compliance program including a Code of Conduct and whistleblower system.
- In 2015, the company strengthened its processes for evaluating business partners against sanctions lists and implemented a new system for assessing corruption risks.
- The sustainability strategy focuses on issues like climate protection, resource efficiency, occupational safety, and stakeholder engagement.
The document discusses sustainability metrics and trends for businesses. It provides examples of companies that are leaders in natural capital efficiency and decoupling. Specifically:
- It introduces the concept of using natural capital metrics like carbon emissions, water use, and waste to measure a company's environmental impacts and efficiency.
- It analyzes trends in collaboration, employee engagement, buildings/operations, and pricing related to sustainability.
- Examples are given of companies that increased revenue while decreasing their environmental impacts, through initiatives like on-site power generation, manufacturing efficiency, and employee incentive programs.
- Next steps discussed include further aligning business strategies with sustainability goals using metrics like supply chain impacts, product analyses, and infrastructure investments.
Ball Packaging Europe is a leading European beverage can manufacturer with over 2,900 employees and €1.4 billion in annual sales. The company has a longstanding commitment to sustainability that is integrated into its corporate strategy. Key sustainability priorities include reducing energy, water, waste, and emissions throughout its operations. Goals include cutting the carbon footprint of common beverage cans by 25% by 2020 compared to 2010 levels. The company engages in initiatives like materials innovation, operational efficiency projects, and supplier partnerships to advance its sustainability performance.
The Sustainability Report 2018 highlights important topics and challenges for HeidelbergCement in its drive for sustainable development. Readers also learn about the successes and aims of corporate sustainability management, as well as the company’s activities in the arena of environmental protection, employees, workplace safety and social responsibility. The report deals with the business year 2018 of the HeidelbergCement Group.
Sustainable Times Issue 7
According to Kyocera’s latest Sustainability survey, office
workers printed 40% fewer pages last year – the first fall
since the survey began in 2007. This is impressive, but not
unexpected: indeed, it’s more surprising that this is the first time a fall has been registered.
The document summarizes a presentation on commercial reasons for Cornish businesses to reduce their carbon footprint and become more environmentally sustainable. It discusses the Green Cornwall program which aims to make Cornwall a leader in low carbon initiatives. Examples are given of local businesses that have improved their bottom line through reducing energy use, waste, and transportation emissions. Attendees are encouraged to use tools to measure their carbon footprint and ideas for how superfast broadband could help decrease emissions.
The Sustainability Report 2016 highlights important topics and challenges for HeidelbergCement in its drive for sustainable development. Readers also learn about the successes and aims of corporate sustainability management, as well as the company’s activities in the arena of environmental protection, employees, workplace safety and social responsibility.
This document summarizes a report on supply chain sustainability across countries. Key findings include:
- Supply chains in the US, China, and Italy face high levels of climate risk but suppliers in these countries have an inadequate response. Suppliers in India and Canada also do not do enough to manage climate change risks.
- Suppliers in Brazil have done the least to manage climate exposures and water shortages indicate risks may be higher than assessed.
- Opportunities exist for collaboration to reduce climate risk, particularly in developing economies like China and India where suppliers are highly willing to collaborate and investments yield high returns.
- A sustainability risk/response matrix allows buyers to quickly assess supply chain sustainability at the country level, with
Eco-Engineering The Grass IsAlways GreenerYes, the .docxjack60216
Eco-Engineering: The Grass Is
Always Greener
Yes, the title of this chapter has a dual meaning. Among senior execu-tives at global corporations, eco-engineering is already seen as astrategic imperative—even though the practice of eco-engineering is
not yet clearly understood by engineers. At the same time, many companies
feel constant pressure to prove that their “green” initiatives are greener than
their competitors’, leading to an upward spiral in greenwashing.
The net result is confusion. It can be difficult for engineers, executives, and
consumers to distinguish between an environmentally responsible project and
a plain old-fashioned PR grab. If you’re an engineer who’s really interested
in making a positive environmental impact, what should you focus on? Here
are a few suggestions, based on lessons learned from the real world of eco-
engineering.
Carbon Neutrality: Good Start but Not Enough
Corporate sustainability leaders tend to be a collaborative group. They are
open to sharing ideas, swapping stories, and growing their networks of col-
leagues in other companies. And that’s a great thing, because those of us who
deal with corporate sustainability on a daily basis know we’re in uncharted
territory and that we’re all learning as we go. We understand it’s in every-
one’s best interest if the overall economy becomes more sustainable. After all,
when it comes to climate changes there aren’t winners and losers—ultimately
we’ll either all win or all lose.
117
11
For example, let’s say your company magically reduces the environmental
impact of its operations to nothing so that you’re able to deliver your products
and services with no impact of any kind. But in the excitement your company
decides that you have created such a big advantage through your eco-effective-
ness that you better keep it a secret and not share your magic with anyone else.
In this case, how much better off is the world? Does erasing the impact of one
company make a big difference? Unfortunately, no.
Which brings us to the subject of carbon neutrality, the term often used to
describe the goal of corporate efforts to lessen companies’ impact on the
environment. No company can reduce its greenhouse gas (GHG) emissions to
zero, so the idea is that Organization A pays Organization B to plant trees,
increase energy efficiency, create green energy, or do something else with a
positive impact on GHG emissions, thus offsetting Organization A’s own car-
bon emissions.
Many companies have centered their environmental strategy on a goal of
achieving carbon neutrality. They are generally doing some efficiency proj-
ects, purchasing some green energy, and offsetting the rest. But we’ve been
looking at product and service lifecycles, and we know the part that’s within
your four walls may be only a small part of your overall impact. What about
your supply chain? What about your products in use at your customers’ facil-
ities? What about your products at the end of their usef ...
Edison is one of Italy's leading operators in the electric power and gas sector and is part of EDF Group. In 2014, Edison celebrated 130 years in business. The report provides an overview of Edison's business areas and 2014 financial results, including its electric power and hydrocarbon operations in Italy and internationally. It achieved stable economic and financial performance despite structural market changes through flexible management of its diversified business model and assets.
The document is Innovation Group's 2014 Sustainability Report which outlines their sustainability strategy and progress. The key points are:
- Innovation Group has set sustainability "at our core" with a Planet, People, Profit approach and identified 8 themes for their 2020 sustainability strategy including impacts on society/environment, carbon/climate change, employees, stakeholders, and supply chain.
- They have committed to reducing their carbon emissions and supporting suppliers to do the same, engaging employees on sustainability, and acting ethically/responsibly.
- Innovation Group recognizes climate change risks to their business from extreme weather but also opportunities to grow through increased demand for claims services and differentiation through sustainable operations.
Joining Forces - the case for collaborationAlex Lankester
This document discusses the benefits of collaboration between businesses in achieving sustainability goals. It argues that tackling sustainability challenges requires coordinated collective action across supply chains. Working collaboratively through fully-linked information sharing can help businesses save money by reducing impacts and risks, and innovating and growing. Examples show energy efficiency collaborations generating estimated savings of hundreds of millions of euros for food suppliers. Collaboration supports identifying and implementing initiatives like LED lighting and refrigeration upgrades. Case studies demonstrate individual companies achieving energy and cost savings by learning from others' experiences through collaborative platforms.
Hindalco Industries Limited is a leading global aluminum and copper company that is part of the Aditya Birla Group, a $35 billion conglomerate. Hindalco is the largest aluminum rolling company in the world through its acquisition of Novelis, and one of the largest producers of primary aluminum in Asia. It has a global presence across 13 countries and over 33,000 employees. Hindalco aims to grow its revenues to $32 billion and aluminum capacity to 1.3 million tons by 2014 through both organic growth and acquisitions.
1) Over the past 5 years, 42 companies worked together through IGD's ECR group to eliminate 260,000 tonnes of product and packaging waste from the UK supply chain, exceeding their original target of 200,000 tonnes.
2) The initiative focused on preventing waste at source rather than recycling, recovering or disposing of waste. Companies collaborated and shared hundreds of changes like improving forecasts, redesigning packaging, and redistributing surpluses to reduce waste.
3) Measuring the different types of changes allowed the group to identify the most effective solutions and encourage other companies to join, with process changes and redistributing surpluses to animals having the biggest impact on waste reduction.
Similar to Teijin Aramid Health, Safety & Environment Report 2018 (20)
Microbial characterisation and identification, and potability of River Kuywa ...Open Access Research Paper
Water contamination is one of the major causes of water borne diseases worldwide. In Kenya, approximately 43% of people lack access to potable water due to human contamination. River Kuywa water is currently experiencing contamination due to human activities. Its water is widely used for domestic, agricultural, industrial and recreational purposes. This study aimed at characterizing bacteria and fungi in river Kuywa water. Water samples were randomly collected from four sites of the river: site A (Matisi), site B (Ngwelo), site C (Nzoia water pump) and site D (Chalicha), during the dry season (January-March 2018) and wet season (April-July 2018) and were transported to Maseno University Microbiology and plant pathology laboratory for analysis. The characterization and identification of bacteria and fungi were carried out using standard microbiological techniques. Nine bacterial genera and three fungi were identified from Kuywa river water. Clostridium spp., Staphylococcus spp., Enterobacter spp., Streptococcus spp., E. coli, Klebsiella spp., Shigella spp., Proteus spp. and Salmonella spp. Fungi were Fusarium oxysporum, Aspergillus flavus complex and Penicillium species. Wet season recorded highest bacterial and fungal counts (6.61-7.66 and 3.83-6.75cfu/ml) respectively. The results indicated that the river Kuywa water is polluted and therefore unsafe for human consumption before treatment. It is therefore recommended that the communities to ensure that they boil water especially for drinking.
Presented by The Global Peatlands Assessment: Mapping, Policy, and Action at GLF Peatlands 2024 - The Global Peatlands Assessment: Mapping, Policy, and Action
Kinetic studies on malachite green dye adsorption from aqueous solutions by A...Open Access Research Paper
Water polluted by dyestuffs compounds is a global threat to health and the environment; accordingly, we prepared a green novel sorbent chemical and Physical system from an algae, chitosan and chitosan nanoparticle and impregnated with algae with chitosan nanocomposite for the sorption of Malachite green dye from water. The algae with chitosan nanocomposite by a simple method and used as a recyclable and effective adsorbent for the removal of malachite green dye from aqueous solutions. Algae, chitosan, chitosan nanoparticle and algae with chitosan nanocomposite were characterized using different physicochemical methods. The functional groups and chemical compounds found in algae, chitosan, chitosan algae, chitosan nanoparticle, and chitosan nanoparticle with algae were identified using FTIR, SEM, and TGADTA/DTG techniques. The optimal adsorption conditions, different dosages, pH and Temperature the amount of algae with chitosan nanocomposite were determined. At optimized conditions and the batch equilibrium studies more than 99% of the dye was removed. The adsorption process data matched well kinetics showed that the reaction order for dye varied with pseudo-first order and pseudo-second order. Furthermore, the maximum adsorption capacity of the algae with chitosan nanocomposite toward malachite green dye reached as high as 15.5mg/g, respectively. Finally, multiple times reusing of algae with chitosan nanocomposite and removing dye from a real wastewater has made it a promising and attractive option for further practical applications.
Optimizing Post Remediation Groundwater Performance with Enhanced Microbiolog...Joshua Orris
Results of geophysics and pneumatic injection pilot tests during 2003 – 2007 yielded significant positive results for injection delivery design and contaminant mass treatment, resulting in permanent shut-down of an existing groundwater Pump & Treat system.
Accessible source areas were subsequently removed (2011) by soil excavation and treated with the placement of Emulsified Vegetable Oil EVO and zero-valent iron ZVI to accelerate treatment of impacted groundwater in overburden and weathered fractured bedrock. Post pilot test and post remediation groundwater monitoring has included analyses of CVOCs, organic fatty acids, dissolved gases and QuantArray® -Chlor to quantify key microorganisms (e.g., Dehalococcoides, Dehalobacter, etc.) and functional genes (e.g., vinyl chloride reductase, methane monooxygenase, etc.) to assess potential for reductive dechlorination and aerobic cometabolism of CVOCs.
In 2022, the first commercial application of MetaArray™ was performed at the site. MetaArray™ utilizes statistical analysis, such as principal component analysis and multivariate analysis to provide evidence that reductive dechlorination is active or even that it is slowing. This creates actionable data allowing users to save money by making important site management decisions earlier.
The results of the MetaArray™ analysis’ support vector machine (SVM) identified groundwater monitoring wells with a 80% confidence that were characterized as either Limited for Reductive Decholorination or had a High Reductive Reduction Dechlorination potential. The results of MetaArray™ will be used to further optimize the site’s post remediation monitoring program for monitored natural attenuation.
Evolving Lifecycles with High Resolution Site Characterization (HRSC) and 3-D...Joshua Orris
The incorporation of a 3DCSM and completion of HRSC provided a tool for enhanced, data-driven, decisions to support a change in remediation closure strategies. Currently, an approved pilot study has been obtained to shut-down the remediation systems (ISCO, P&T) and conduct a hydraulic study under non-pumping conditions. A separate micro-biological bench scale treatability study was competed that yielded positive results for an emerging innovative technology. As a result, a field pilot study has commenced with results expected in nine-twelve months. With the results of the hydraulic study, field pilot studies and an updated risk assessment leading site monitoring optimization cost lifecycle savings upwards of $15MM towards an alternatively evolved best available technology remediation closure strategy.
ENVIRONMENT~ Renewable Energy Sources and their future prospects.tiwarimanvi3129
This presentation is for us to know that how our Environment need Attention for protection of our natural resources which are depleted day by day that's why we need to take time and shift our attention to renewable energy sources instead of non-renewable sources which are better and Eco-friendly for our environment. these renewable energy sources are so helpful for our planet and for every living organism which depends on environment.
Epcon is One of the World's leading Manufacturing Companies.EpconLP
Epcon is One of the World's leading Manufacturing Companies. With over 4000 installations worldwide, EPCON has been pioneering new techniques since 1977 that have become industry standards now. Founded in 1977, Epcon has grown from a one-man operation to a global leader in developing and manufacturing innovative air pollution control technology and industrial heating equipment.
Climate Change All over the World .pptxsairaanwer024
Climate change refers to significant and lasting changes in the average weather patterns over periods ranging from decades to millions of years. It encompasses both global warming driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns. While climate change is a natural phenomenon, human activities, particularly since the Industrial Revolution, have accelerated its pace and intensity
Improving the viability of probiotics by encapsulation methods for developmen...Open Access Research Paper
The popularity of functional foods among scientists and common people has been increasing day by day. Awareness and modernization make the consumer think better regarding food and nutrition. Now a day’s individual knows very well about the relation between food consumption and disease prevalence. Humans have a diversity of microbes in the gut that together form the gut microflora. Probiotics are the health-promoting live microbial cells improve host health through gut and brain connection and fighting against harmful bacteria. Bifidobacterium and Lactobacillus are the two bacterial genera which are considered to be probiotic. These good bacteria are facing challenges of viability. There are so many factors such as sensitivity to heat, pH, acidity, osmotic effect, mechanical shear, chemical components, freezing and storage time as well which affects the viability of probiotics in the dairy food matrix as well as in the gut. Multiple efforts have been done in the past and ongoing in present for these beneficial microbial population stability until their destination in the gut. One of a useful technique known as microencapsulation makes the probiotic effective in the diversified conditions and maintain these microbe’s community to the optimum level for achieving targeted benefits. Dairy products are found to be an ideal vehicle for probiotic incorporation. It has been seen that the encapsulated microbial cells show higher viability than the free cells in different processing and storage conditions as well as against bile salts in the gut. They make the food functional when incorporated, without affecting the product sensory characteristics.
1. Aramids by Teijin
A sustainable future.
Our journey.
Our promise.
HSEReport2018
2. 7.1% 3.3%Reduction of direct CO₂ emissions
at our locations (scope 1)
compared to 2017
Less m3
water used compared
to 2017
Welcome toTeijin Aramid's Health, Safety and
Environment (HSE) Report 2018. In 2018, we
continued to make valuable products for our
customers, while guaranteeing the quality
of our products and ensuring they are manu-
factured in a safe way, in compliance with all
applicable regulations. At the same time, we
elevated our commitment to doing this in a
sustainable way.
As Teijin Aramid, we aim to be transparent about the impact
of our own activities on people and the environment, so we
find it important to report on the HSE performance of our
production locations in the Netherlands (Twaron® production).
“We make valuable products for our customers, in a safe
way, in compliance with all applicable regulations. At the
same time, we elevated our commitment to doing this in
a sustainable way.”
2.5% 3.8%
318TJ
Energy savings resulting from EEP
projects compared to 2015
(EEP period 2016 – 2020)
More recycling material used
for the production of pulp
compared to 2017
Energy savings thanks to the use of aramid
in conveyor belts.
Total
Recordable
Rate
The application of Twaron® instead of steel as the reinforcing material in conveyor belts makes
the belts considerably lighter. As a result, operating Twaron®-reinforced conveyor belts requires
less energy. In 2018, these savings at end-users amounted to more than 300 Terajoule (TJ).
The Total Recordable Rate (TRR) is the
total number of incidents (ranging
from medical treatments to actual
incidents resulting in absence) per
one million working hours. In 2018,
unfortunately, we registered 4 more
incidents compared to 2017, leading
to a higher TRR.
As we would like to emphasize our increased level of
ambition regarding sustainability, we have changed the
setup of our HSE Report. In a more attractive layout, we
highlight our views on developments around the globe,
the impact of global issues such as climate change and
waste, and what this means for us as a company. Specifically,
we focus on the subjects energy and resources, and we also
report on the performance of Twaron® in these areas. In
addition, we continue to provide insights into the local HSE
performance of our facilities in Delfzijl, Emmen and Arnhem
in the Netherlands.
We would very much like to receive your feedback on this
report, so that we can make further improvements next year.
Please send us your views, comments or observations by sub
mitting the online form on our website (www.teijinaramid.com)
or by sending us an email (information@teijinaramid.com), and
we will get back to you. Any feedback will be greatly appreciated.
8.7%
2 Teijin Aramid | HSE Report 2018 3
3. “Our ultimate goal is a fully
sustainable circular aramid chain
with a finite use of resources on the
basis of 100% renewable energy.”
GertFrederiks,CEOofTeijinAramid
Compared to alternative products,
aramid applications offer a
sustainable solution, as they are
lighter and more durable, which
saves energy and helps reduce CO₂
emissions. Over the past years,
we’ve been working closely with
customers to improve the eco-
efficiency of their products through
the use of aramid. Nevertheless,
producing aramids is an energy-
intensive process. That’s why, in our
sustainability efforts, we’ve also
long focused on reducing energy
consumption.
Ourvisionofthefuture
However, what we’ve been doing
so far will not be enough to achieve
our ultimate goal: a fully sustainable
circular aramid chain with a finite use
of resources on the basis of 100%
renewable energy. That’s why, in 2018,
we started accelerating the steps
we’re taking towards this vision of the
future. Dedicating up to 20% of our
RD budget to sustainability-related
projects, we work on highly innovative
technologies for the production and
recycling of our materials. In addition,
we work closely with customers, the
suppliers of our raw materials, and
other players in the market. Personally,
I’m very proud that, as a strong and
financially solid player in the industry,
we’re in a position to embark on this
exciting journey.
Safety:ourNo.1priority
A sustainable business is also one
where health and safety are always our
first priority. Many of our employees
work with potentially dangerous
substances or equipment. We therefore
have solid programs in place to ensure
everyone can return home in good
health every day. While we always
learn from incidents, we want our
safety mindset to be proactive. We
know that we still have some way to
go in this regard. Improving our safety
performance across our sites remains
a top priority.
New-stylereport
To reflect our increased commitment to
a fully sustainable future, our HSE Report
has been given a makeover. Besides
reporting on our HSE performance,
we also provide more in-depth views
on trends and developments in the
fields of energy and resources and how
these relate toTeijin Aramid and our
sustainability drive.
Happy reading!
4 Teijin Aramid | HSE Report 2018 54
5. Through its lightweight and durable high-performance
fibers, Teijin Aramid has always had sustainability at its core.
Thanks to our materials, our customer and end-users benefit
from products that last longer, require less maintenance, and
reduce energy costs and CO₂ emissions. At the same time, we
have long focused on minimizing energy consumption and
waste in our production processes. We do this through our
Energy Efficiency Plans (EEPs) and by recycling used aramids,
thus preventing them from ending up as waste and giving
them a new lease of life in the form of pulp.
People around the world are increasingly concerned about climate change. The younger generations are even taking
to the streets to voice their anger that politicians and businesses seem to be far too slow in enforcing measures to
reduce CO₂ emissions. The Paris Agreement, the extension of CO₂ pricing, and the energy transition to sustainable
sources of energy have all led to a heated political debate. In the Netherlands, where our Twaron® and Endumax®
plants are based, this has resulted in a Climate Agreement. All these developments are adding to the sense of urgency
that we at Teijin Aramid feel to accelerate our own‘sustainable energy’efforts.
As a business-to-business company, the effects of our
sustainability efforts are noticeable throughout the value
chain. The energy footprint of our products does not stop
when we have produced the materials. Thanks to our
lightweight and durable aramids, customers and end-users
can achieve significant energy savings themselves – a
win-win for both them and the environment.
Energy Environment.
Asustainablefuture.Ourjourney.Ourpromise.
8 Teijin Aramid | HSE Report 2018 9
6. “In 2018, we initiated a
clear shift of focus towards
accelerating the reduction
of our CO₂ emissions.”
Energyefficiency
Energy has a significant impact on our ecological footprint.
In our efforts to reduce our ecological footprint, we
are always seeking new ways of reducing our energy
consumption in manufacturing our products.
Teijin Aramid has taken energy efficiency and energy
saving very seriously for many years. Since 2009, we
have participated in the MJA-3 covenant, which involves
long-term agreements between the Dutch government
and companies on improving energy efficiency. The
implementation of these agreements are defined per
location in Energy Efficiency Plans (EEPs). The objective is to
achieve an annual average of 2% energy efficiency savings
in our production processes. In addition, in recent years,
we have intensified our research efforts to develop new
technologies that will make our processes even more energy-
with our suppliers in Emmen and Delfzijl to explore how we
can create a win-win situation. We are confident that we can
make the first essential steps in the coming years. Besides
working closely with our traditional suppliers, we may also
need to find new, innovative partners in the market to
support us in our drive towards a CO₂-neutral future.
Rawmaterials
For our raw materials, we depend on the chemical industry.
To improve our eco-efficiency profile, we have initiated
a number of pilot projects to make our raw materials
more sustainable. For example, we work closely with our
supplier of raw materials for our plant in Delfzijl. As they
are increasingly using renewable sources of energy, the
ecological profile of the raw materials we purchase is also
becoming more sustainable.
Challenges
Our ambitions reach high, and achieving them will not
be easy. An important challenge that industry in the
Netherlands as a whole is facing is that CO₂ limits imposed
by law do not take into account any CO₂ benefits in the
chain. We feel that this is a missed opportunity. If the total
value chain of our products is taken into account, we can
show that the application of aramid instead of alternative
materials saves a multitude of the CO₂ emissions related to
the production of the aramid in question. Another dilemma
is the limited availability of renewable energy, and, to a
lesser extent, the higher prices. Scarcity is in fact one of the
efficient. And whenever we expand our plants or build
new facilities, we make sure to include the latest and most
energy-efficient technologies and equipment.
FocusonreducingCO₂
Within our business, our energy consumption is our main
contributor to CO₂ emissions, and we will continue to
improve the energy efficiency of our processes. However,
this will not be enough for a fully sustainable future. A big
game changer here is the general shift in focus toward the
reduction of CO₂. That’s why, in 2018, we decided that we will
need to accelerate the reduction of our direct and indirect
CO₂ emissions. What’s more, our ambition is to take a leading
role in the world of aramid in this regard.
Energytransition
In the Netherlands, we feel the pressure of the energy
transition at our Twaron® production sites. To run our
business, we will always need energy. Even with more
efficient processes, our energy consumption is still a major
contributor to our CO₂ generation. In 2018, we therefore
started exploring our options with regard to our own energy
transition, such as the use of renewable energy as our
primary source of energy.
As we cannot do this alone, we will need to partner up with
our energy suppliers, who feel the same pressure as we do.
They also need to find ways of making the energy they sell
more sustainable. We have therefore entered into discussions
biggest challenges, and one we will not be able to solve
on our own. We will therefore need to partner up with
like-minded parties to look for new ways of generating
sufficient renewable energy.
Focusanddedication
Going forward, Teijin Aramid is committed to taking the
necessary steps that will continue to reduce our ecological
footprint, and we will accelerate our efforts where this is
possible. This requires focus and dedication in the way
we organize our activities, working closely with suppliers,
customers, and all other partners in the chain.
EnergyEnvironment.
10 Teijin Aramid | HSE Report 2018 11
7. EnergyEnvironment.
Ourperformancein2018.
In 2018, we worked according to our third Energy Efficiency
Plan (EEP), for the period 2017-2020. All local results are
given in the local performance pages (see appendices).
The graph below shows that the energy consumption per
ton production of Twaron® has stabilized over the past
few years. Increasing our energy efficiency even further
is clearly taking more and more effort, as all the low- and
medium-hanging fruits have already been picked.
Looking at the results of the current EEP period (for the years
2017 and 2018), we achieved an overall energy savings of
2.5%. This is lagging behind on the plans agreed, and we
have therefore defined various actions to get back on track.
start a program to define relevant CO₂ reduction targets and
corresponding actions.
Ourproductcarbonfootprint
In 2016, we first calculated our‘product carbon footprint’, i.e.,
the average eco-profile of our Twaron® yarn and pulp. We are
currently in the process of recalculating this footprint, but for
now we still use the 2016 product carbon footprint values.
In order to be able to make a good comparison, the current
GWP (Global Warming Potential) values are based on a fixed
set of data: the average production data from 2012 to 2014.
The scope of these product carbon footprints is‘from cradle
to factory gate’, covering the extraction of raw materials, the
production of intermediate materials, and the production of
our end-product Twaron®.
Yarn, average
GWP1)
excl. biogenic carbon2)
12.2
[kg CO₂-eq/kg average yarn]
Pulp, average
GWP excl. biogenic carbon
12.9
[kg CO₂-eq/kg average pulp]
In 2018, we added a focus on reducing our direct CO₂
emissions (scope 1). The graph below shows the overall
direct CO₂ emissions per ton production of Twaron® in the
Netherlands. This is the direct CO₂ emitted by using natural
gas for our drying and heating process (scope 1). It does not
include the indirect CO₂ emissions from the generation of all
other energy sources purchased (scope 2). The reduction is
mainly the result of our efforts with regard to reducing the
amount of energy required.
The reductions achieved so far will not be enough to
drastically reduce our direct CO₂ emissions further. This will
require more sustainable sources of energy. In 2019, we will
It is important to bear in mind that comparisons between
materials are often made on the basis of its eco-profile per
kg of material. However, we always emphasize that it is in
fact the function of the material that reveals a product’s total
ecological impact.
By means of our Customer Benefit Model, we make fact-
based calculations, which we discuss with our partners. For
example, when comparing the use of para-aramid instead of
steel as a reinforcement material in conveyor belts, we can
calculate that the application of aramid significantly reduces
CO₂ emissions. A Twaron®-reinforced belt weighs up to
40% less, resulting in high energy savings of up to 25% and
reduced CO₂ emissions over the belt’s total life time.
2010 2011 2012 20142013 2015 2016 2017 2018
Year
0.15
0.1
0.05
0
0.2
0.25
0.3
Tj/Ton
2010 2011 2012 20142013 2015 2016 2017 2018
Year
0.6
0.4
0.2
0
0.8
1
1.2
1.4
1.6
1.8
Ton/ton
Total energy (TJ)/ ton Twaron® production Total tons CO₂/ton Twaron® production (scope 1)
1)
GWP = Global Warming Potential
2)
Other impact categories are available on request
12 Teijin Aramid | HSE Report 2018 13
8. “I strongly believe that
the chemical industry
will actually be part
of the solution to the
CO₂ challenge.”
EdwardGroen,SiteManagerDelfzijl,
theNetherlands
“At our site in Delfzijl, we produce
monomers and the aramid polymer
that serves as the raw material for
Teijin Aramid’s successful Twaron®
para-aramid fiber. As this is a
highly energy-intensive process,
we’ve actively worked on energy
reduction for many years.
Thanks to more energy-efficient
equipment and innovative
technologies, we’re steadily
progressing towards our 2030
objective of a 49% reduction in energy
use per kg of polymer compared to
1990. However, because our business
is growing fast, our absolute CO₂
emissions continue to increase. And
no matter how energy-efficient our
processes are, we’ll always need
energy. In order to truly minimize our
CO₂ emissions, we’ll need to start using
renewable sources of energy rather
than fossil fuels. In 2018, we started
exploring further options with our
utility supplier to see if we can start
using steam produced from biomass.
Another promising renewable energy
source we’re looking into for the longer
term is hydrogen generated from wind
energy through electrolysis.
One of our main challenges here is
that we’re competing on a global level,
including when it comes to energy
costs. Renewable sources of energy are
still up to four times more expensive
than natural gas, so we need the prices
to come down before we can make real
steps in this regard.
As we work on solutions, new business
models will arise, and cross-chain
collaboration will be essential to
create breakthroughs. That’s why, as
Teijin Aramid, we work closely with
our suppliers, partners and customers
and take part in a regional industry
consultative body. In this way, we stay
at the forefront of developments.
I strongly believe that the chemical
industry, which is always looking for
breakthrough innovations, will actually
be part of the solution to the CO₂
challenge. If we can pool everyone’s
expertise effectively, I’m convinced we
can help make the energy transition
come true and leave a more beautiful
world for the next generations.”
14 Teijin Aramid | HSE Report 2018 15
9. Resources.
For several decades, we have taken the benefits of plastics
and synthetic materials for granted, without paying much
attention to the global disaster we see looming now. In
recent years, citizens, governments and businesses around
the world have been waking up to the fact that we will need
to act fast. We see initiatives arise such as the Ocean Cleanup
and bans on certain plastic products, particularly those that
are only used once and then thrown away.
As an aramid producer, we rely on primary resources that
are oil-based, and we produce synthetic materials that are
meant to last. As such, we do not actually contribute to the
‘plastic soup’problem in the oceans, but some of our residual
materials may still be incinerated or end up in landfill at the
Our modern lifestyle has led to a vast and growing amount of waste. Plastics and chemicals that end up in our oceans
and elsewhere in the natural environment are taking their toll on wildlife, and ultimately on our own health.
end of their useful life. In our drive for sustainability, the way
we source and reuse our materials throughout the chain is
therefore hugely influential when it comes to preventing
waste.
We attach great importance to reusing and recycling
materials – not only of the chemical substances we use in
our production processes, such as sulfuric acid and NMP, but
also of our finished products, the aramids themselves. Our
products are far too valuable to end up as waste. By reusing
our aramids, we not only save on the energy-intensive
process of producing new materials, but we also reduce net
waste, CO₂ emissions and costs.
Asustainablefuture.Ourjourney.Ourpromise.
16 Teijin Aramid | HSE Report 2018 17
10. Towardsacirculareconomy
In an ideal world, there is no waste. In a circular economy,
we will simply keep using the same materials over and over
again. Our focus on circularity will enable us to serve two
important sustainability goals: reduction – and ultimately
elimination – of both CO₂ emissions and waste.
Recyclingwithinourproductionprocesses
Within our production processes, recycling has always been
important. We have designed and optimized our processes
in such a way as to maximize recycling opportunities. At our
plant in Delfzijl, for example, we recover the solvents NMP
and CaCl₂ from our spent solvent streams, and in Emmen we
have a closed sulfuric acid loop, while we also reuse water
as much as we can. In Arnhem, we collect our spent solvent
small part of the end-product in which they are used, and the
value chain from us to the end-user can be quite long. This
makes it extra challenging to retrieve the aramids from the
end-products before they are discarded as waste. In addition,
as early as in the design stage of end-products, it will become
increasingly important to consider the ways in which aramids
are incorporated in order to facilitate recovery and recycling.
Good collaboration and common objectives will therefore
be essential in creating a win-win-win situation for ourselves,
our partners, and the planet.
Challengesandopportunities
A circular business requires new ways of working. As we
deliver such a wide variety of materials for so many different
markets, and because they may end up in just very small
amounts as part of all kinds of products, our value chain is
very complex and multidimensional. To make sure we can
retrieve as much of our material as possible, we need more
in-depth insight into this chain, as well as the potential
recycling chain. We cannot just take back any materials.
We need to know where things come from, what is in them
exactly, and whether they are safe to work with. We therefore
rely on other parties and partners in the chain. The fact that
governments around the globe are increasingly introducing
legislation that prohibits the dumping of materials will be
helpful in this regard. There is a clear global movement
towards promoting circularity. Together with our partners,
we should seize this momentum as an opportunity to step
up our efforts to reuse as many aramids as possible.
stream. For economy-of-scale and efficiency reasons, this
is treated in Delfzijl to recover NMP. The water is reused in
Delfzijl, while the NMP is reused in Arnhem.
Recyclingaramids
We reuse sub-grade aramid materials from our own
production process by reprocessing them. In addition, we
buy used aramid materials from the market, which serve as
source material for our Twaron® pulp. This pulp is used for
friction products, mainly for the automotive industry. The
recycling materials we process are yarn residuals, production
leftovers, fabrics, and ballistic vests.
With a view to the future, in 2018 a multidisciplinary Circular
Economy Team has been set up, which is looking into even
more recycling opportunities, retrieving materials from other
sources, such as intermediate products, and working out
what they could be used for. Our research efforts will also
focus on expanding the possibilities of reusing materials in
different ways and from a larger variety of end-products. This
will be particularly valuable in a market where used aramids
are hard to come by and their value is high.
Jointeffort
In the Circular Economy Team, colleagues from RD work
closely with the sales team to ensure alignment with market
developments. We also work closely with customers and
other partners in the value chain to retrieve more used
materials from the market. Our aramids often form only a
Long-termdream:fromoil-basedtorenewable-based
Another development that will become more urgent in
the longer term will be the origin of our raw materials.
Our polymers are currently oil-based, and will remain so
in the foreseeable future, but we are also stimulating the
development of bio-based raw materials. In collaboration
with our research institute, our site in Delfzijl is looking
into ways of creating a super-strong high-quality fiber on
the basis of sustainable raw materials. Together with an
external partner, we have set up a lab-scale pilot to test the
production of a bio-based yarn.
“Our focus on circularity
will enable us to serve two
important sustainability
goals: minimizing both
CO₂ emissions and waste.”
Resources.
18 Teijin Aramid | HSE Report 2018 19
11. We report on our performance with regard to resources
in three areas: recycling, water consumption and waste.
Recycling
As we explained earlier, recycling involves several aspects,
including the recovery of raw materials. Where possible, we
have closed process loops, in which we recover auxiliary
chemicals such as sulfuric acid (Emmen), NMP (Delfzijl and
Arnhem), water, and other valuable raw materials. Where
applicable, we also try to maximize the recycling of our
sub-grade aramid material and waste. In addition, we recycle
reusable aramids.
We have two recycling facilities: one in Emmen and one in
Arnhem. At both locations, we make pulp products out of
reusable aramids. Over the past few years, we have continued
to increase our recycled input. The graph shows the tonnage
in % compared to the selected reference year 2010.
Waste
In spite of our closed loop and recycling approach, our
production plants still produce waste that we cannot reuse.
At all our locations, this waste is either offered for external
recycling or sent to incinerators. A small part is discharged
as landfill. Although limiting waste is not a strategic priority,
we try to reduce waste where possible. This has resulted in a
reduced total tonnage of waste per ton production.
Waterconsumption
All our factories make use of industrial water. In our
production processes, we try to reuse as much water as we
can. Nevertheless, we still need additional fresh water. Most
of our water intake is used for the washing process of our
yarn. Reducing our water intake is not a strategic priority,
but we do try to improve our footprint in this regard. Over
the past few years, we have been implementing various
efficiency improvements in our production processes.
Resources.
Ourperformance
in2018.
2010 2011 2012 20142013 2015 2016 2017 2018
Year
15
10
5
0
20
25
30
35
40
m3
/tonprodution
2010 2011 2012 20142013 2015 2016 2017 2018
Year
3,000
2,000
1,000
0
4,000
5,000
6,000
0.06
0.04
0.02
0
0.08
0.10
0.12
0.16
0.14
0.18
0.20
Tons
Ton/ton
Waste: total tons and total ton waste/ton Twaron®
production
Water consumption (m3
)/ton Twaron® production
Landfill total
Incineration total
Recycled total
Waste ton/ton Twaron®
Delfzijl Emmen Arnhem
NMP H₂SO₄ NMP
Water Water Water
CaCl₂ Recycling Recycling
Usedaramids
Recovery
Recycling
Usedaramids
Off spec Twaron®
(NB: This is a schematic representation. Our auxiliary
chemicals are not 100% recovered.)
2010 2011 2012 20142013 2015 2016 2017 2018
Year
60
40
20
0
80
100
120
140
160
180
%
Input recycled Aramids
20 Teijin Aramid | HSE Report 2018 21
12. “Given our circular
economy drive, recycling
is increasingly becoming
a highly strategic topic.”
ReneLohmann,SalesMarketingManager
Ballistics,Wuppertal,Germany
SaskiaVerhoeven,PlantSiteManager,
Arnhem,theNetherlands
“Recycling is becoming increasingly important, and
we want to more than double our volumes in the next
five years. The markets we get return streams from are
currently the US and Europe, and the materials we buy
back are yarns, fabrics, and ballistic materials such as
vests.
We are now working on making the purchasing process
more efficient, eventually getting return streams from all
applications and all our markets at a global level, including
Asia and South America.
Importantly, we don’t just buy back our own materials, but
also other para-aramids from the market, either directly
from some of our customers or from other para-aramid
users. When dealing with customers, we work closely with
our sales colleagues. Because the‘normal’relationship is
reversed, genuine partnerships and common goals are
essential. We depend on trusted and reliable parties, with
a professional and sustainable chain for processing the
materials.”
“The recycling materials bought back by the purchasing
team end up in bales in Arnhem. This materials is fed
into our“recycling lane”, and is handled with care, as the
material may sometimes still contain shards or other
sharp materials such as bits of knives and bullets. Our
people who work on this lane therefore always wear
protective gloves.
The material is cut up in a special cutting machine, which is
quite a challenge, given the strength of the material. The cut
material is processed into a special type of Twaron® pulp.
This pulp is used for many different high-tech applications,
and is a safe alternative to asbestos.
Recycled materials are a very important source for Teijin
Aramid. They enable us to offer our customers ecologically
responsible solutions and attractive GWP footprints.
Given our circular economy drive, recycling is increasingly
becoming a highly strategic topic. That’s why our focus
going forward will be on acquiring more in-depth insights
into the recycling chain and gaining access to more and
good-quality materials throughout the world. We realize
that this will be quite challenging, as the market is extremely
competitive, with a growing number of players. We’re ready
to take it on!”
22 Teijin Aramid | HSE Report 2018 23
13. With regard to safety, we aim to be among the best in class.
We want our employees and contract workers to return
home from work safely, every day. A safe work environment
can be achieved by managing risks well. On the one hand,
this is done by means of process management (technologies
and systems) and, on the other hand, by means of social
management (people and behavior).
Health and safety are main priorities in the development and manufacturing of our products. Given that our core
business involves the handling of hazardous chemicals and machinery, it is of crucial importance that our employees
and contract workers, as well as people living in the neighborhood, always remain safe.
This mainly relates to conscious behavior, a well-functioning
dialogue between collaborative parties, and compliance
with relevant procedures. We are striving for what we call a
‘proactive safety culture’within our organization. However,
we are not there yet. To achieve our goal, we have set up
various programs that address both labor safety and process
safety.Health Safety.
Asustainablefuture.Ourjourney.Ourpromise.
24 Teijin Aramid | HSE Report 2018 25
14. Safety is key for our license to operate, and we pay a great
deal of attention to the continuous improvement of our
safety standards and safe ways of working, both for our
own employees and for the contractors we work with.
In our safety approach, we differentiate between labor safety
and process safety. For both areas, we have set up various
programs to further improve safety levels.
Laborsafety
Labor safety refers to the level of safety with regard to incidents
and unsafe situations leading to personal injury. In the event
of an unsafe situation or an actual incident, we always report
it. We see each report as an opportunity to improve safety
levels. All reports are saved in a database, and relevant
possible, we reduce exposure to chemical substances; this
is always the first step. However, if reduction measures are
not sufficient or feasible, the use of personal protective
equipment (PPE) is mandatory to ensure that people work
safely within the legal limits, or our own limits if they are
stricter.
Processsafety
Besides labor safety, we also pay a great deal of attention
to process safety. This focuses on the safety and integrity of
our equipment. Our production plant in Delfzijl is a process
facility par excellence, which is why it plays a leading role
within Teijin Aramid when it comes to process safety.
Over the past five years, our large production plants have
been working in accordance with the industry standards
for process safety management drawn up by the American
Center for Chemical Process Safety (CCPS). In line with these
standards, we periodically carry out scans of twenty different
aspects of our organization in order to evaluate if our process
safety management is at an informal, functional, integrated
or leading level. Based on the results, we implement targeted
projects to make our plants even safer. In 2018, we executed
various projects at all of our locations to improve our process
safety levels.
ProcessSafetyManagementtargets
In 2019, all our locations will be assessed or reassessed in
order to determine our current level with regard to the
actions are defined to improve the situation. In order to make
structural improvements to safety within our work environ
ment, we investigate all reports to look for trends or other
overarching issues and underlying causes that require our
attention. We do this at all locations, and share best practices.
This analysis has shown that, in order to reduce the numbers
of incidents, we should focus more on people’s behavior. Our
goal is to achieve what we call a pro-active safety culture. For
this purpose, in 2017, we introduced the‘brain safety model’,
which aims to increase people’s awareness of risks and to
reduce the negative effects of potential risks. Emmen was the
first location to start working according to this philosophy. A
key element of this approach in Emmen was the introduction
of‘safety coaches’. We now have some 50 safety coaches in
place. These coaches are trained to discuss safety with their
colleagues by asking questions and giving feedback in the
workplace.
In 2018, the principles of brain-based safety were introduced
in Delfzijl. In 2019, the method will also be rolled out at our
Twaron® pulp location in Arnhem.
Exposure
In our production process, we work with various chemical
substances. Preventing employees’exposure to chemical
substances is an absolute priority and receives a great deal
of attention. In particular, we aim to further reduce the
levels of exposure to NMP, aniline and sulfuric acid. Where
CCPS standard. Our ultimate goal is to become best in
class ( 90%). For our two larger locations in Delfzijl and
Emmen, we have set specific intermediate targets for 2019.
The assessment will show to what extent we are meeting
these targets and in which areas further improvements are
possible. For Delfzijl, we aim to achieve a score of 85% in
2019, which would mean that we are well on our way to
becoming leading in the industry. In Emmen, we have set
the target at 80% for 2019, which is the‘integrated’level.
Our production location in Arnhem is the third in line to be
assessed. Here, the approach according to the CCPS process
safety management standard is new, and no target has yet
been set. As a relatively small location, our Arnhem site will
carry out an applicability scan rather than a full assessment.
ATEX
In 2018, we paid specific attention to our ATEX zones.
ATEX (Atmospheres Explosives) is a set of European Union
regulations designed to ensure a safe working environment
for employees and to guarantee the suitability of equipment
and protective systems used in areas where an explosive
atmosphere may occur (ATEX zones). All our locations have
identified their ATEX zones and taken the required measures
to ensure a safe working environment. The next step will
be to make sure that all technical instrumentation is in
accordance with the required ATEX standards. An analysis
has been made, and the implementation of all required
improvements has been planned.
“Our goal is to achieve a
pro-active safety culture
by increasing people's
awareness of risks and
encouraging safe behavior.”
Safety.
26 Teijin Aramid | HSE Report 2018 27
15. Despite all our efforts, hazardous situations still occur
and, unfortunately, incidents still happen. We do
everything we can to prevent this, as we believe that
each incident is one too many.
We measure our safety performance on the basis of the
following data:
1. Incidents leading to absence (Lost Time Injuries – LTI)
2. Incidents leading to temporary alternative work
(Restricted Work Cases)
3. Incidents requiring medical treatment (Medical
Treatment Cases)
Using this information, we calculate the Total Recordable
Rate (TRR), which is the total number of incidents (i.e., the
total of Lost Time Injuries, Restricted Work Cases and Medical
Treatment Cases) per one million working hours. We also
calculate the LTI frequency rate, which is the total number of
LTIs per one million working hours.
The health of our employees is very important to us. One
of the ways we measure our performance with regard to
our employees’health is our‘absence due to illness rate’.
In 2018, this rate was 6.3%.
Despite our many efforts to lower absenteeism due to illness
and to improve the employability of our people, our‘absence
due to illness rate’has not significantly improved. Particularly
in Emmen, illness-related absenteeism is high. Here we see
that an ageing work population and shift work are taking
their toll. Long-term absenteeism (from 6 weeks to 12 months)
has a noticeable effect on the rate.
We will continue our efforts to reduce absenteeism due
to illness. We do this by making use of‘vitality coaches’in
collaboration with a certified occupational health and safety
organization, as well as through various projects geared to
sustainable employability, such as increasing the level of
automation, lifestyle improvements, (shift) work patterns, etc.
Safetytargetsandsafetyperformance
In order to be able to measure the effect of our improvement
programs, we have set ourselves the target of an overallTotal
Recordable Rate (TRR) of below 8. Despite our extra efforts, we
did not achieve this target in 2018, and the safety programs
implemented have not yet led to the desired results, as our
TTR in 2018 was 8.7. Both our LTI frequency rate (2.09) and
the other recordables are not yet up to our desired standards.
We see this as a negative trend, and we are working hard to
reverse it. In 2019, we will start with a thorough evaluation of
our labor safety approach and the corresponding program.
On the basis of this review, the program will be adjusted to
significantly improve our safety performance.
Safety.
Ourperformance
in2018.
Health.
Ourperformance
in2018.
2010 2011 2012 20142013 2015 2016 2017 2018
Year
6
4
2
0
8
10
12
14
16
Rate(numbers/millionworkinghours)
2010 2011 2012 20142013 2015 2016 2017 2018
Year
%
3
2
1
0
4
5
6
7
Safety incidents Health-related absences
Total Recordable Rate (TRR)
LTI Frequency rate
28 Teijin Aramid | HSE Report 2018 29
16. Teijin Aramid is an international organization, with
production plants in Japan, Thailand and the Netherlands,
and with research centers in Japan (Tokyo), the Netherlands
(Arnhem), Germany (Wuppertal), and China (Shanghai).
Our sales organization covers all regions of the World: USA,
South America, EMEA, Japan, China and India. The total
Teijin Aramid organization employs some 1,750 people.
As part of Teijin Limited, Teijin Aramid follows the Group’s
strategy and policies. These policies and their impact are
reflected in the Teijin Group Integrated Report 2018. This
report can be downloaded from the Teijin Group website
(www.teijin.com/csr/report).
This HSE Report reflects the impact of Teijin Aramid’s
operations in the Netherlands (Twaron®).Teijin Group.
Teijin Aramid is part ofTeijin Limited, our Japanese parent company
and the holding company of theTeijin Group.
Asustainablefuture.Ourjourney.Ourpromise.
30 Teijin Aramid | HSE Report 2018 31
17. 20102005 2011 2012 20142013 2015 2016 2017 2018
Year
90
80
70
60
100
110
120
Indexcomparedto2005
We express our energy consumption by means of the Energy Efficiency Index (EEI).
This is the total energy consumption per ton manufactured product per site,
compared to 2005.
EnergyEfficiencyIndex
Teijin Aramid has an extensive global network of sales offices and agents,
so that customers all over the world can optimally benefit from our products
and knowledge. Our head office is located in Arnhem, as is our RD depart-
ment. Our Twaron® production facilities are located in Delfzijl, Emmen and
Arnhem.
In this appendix, all local facts and figures are presented. In addition to reporting
on our performance at Twaron® level, we also offer the data on a local level.
If you have any questions regarding these data, feel free to contact us by e-mail
(information@teijinaramid.com).
EEI Delfzijl
EEI Emmen
EEI Arnhem
Appendices.
Performanceper
productionlocation.
32 Teijin Aramid | HSE Report 2018 33
18. Emissionstowater Location 2014 2015 2016 2017 2018
Component (in tons)
Chemical Oxygen Demand (COD) Delfzijl 57 60 48 61 51
Emmen 5.1 4.5 5.8 5.4 5.2
Arnhem 14.9 7.0 6.1 6.1 6.1
Total Nitrogen Total Nitrogen Delfzijl 5.1 5.6 4.6 5.6 5.1
Emmen 0.5 0.4 0.4 0.4 0.4
Arnhem 0.2 0.1 0.4
N-methylpyrrolidone Delfzijl 1.7 2.1 1.9 2.2 2.4
Arnhem 0 0.2 0.2 0.1 0.3
Sulfate Delfzijl 54 49 46 50 48
Emmen 226 237 231 253 246
Arnhem 70 57 49 67 62
Emissionstoair Location 2010 2011 2012 2013 2014 2015 2016 2017 2018
Component (in kg)
Polymer dust and other particulates Delfzijl 999 884 1,148 1,143 1,070 991 1,029 1,450 1,695
Arnhem 52 17 15 8 8 2 36 2 13
Tetrachloromethane Delfzijl 103 145 301 81 184 677 145 132 44
N-Methylpyrrolion (NMP) Delfzijl 149 146 251 513 871 624 436 852 517
Arnhem 6 10 0.1 0.4
Aniline Delfzijl 81 23 26 21 20 20 20 50 42
Dichloromethane Delfzijl 1,059 1,609 1,051 1,839 894 366 800 315 360
Freon 507 Emmen 490 49 0 245 147 98 245 294 98
Arnhem 0 20 0 85*) 70
Nitrogen oxide (tons) Delfzijl 11 12 11 11 12 9 8 10 9
Emmen 1 2 2 2 2 2 2 2 2
Arnhem 1 1 1 1 0.7 0.4 0.4 0.9 0.9
20102005 2011 2012 20142013 2015 2016 2017 2018
Year
70
65
60
55
75
80
85
90
95
100
105
Indexcomparedto2005
All our factories make use of industrial water. We report on our water consumption
by means of the water consumption index per location. This is the water
consumption per ton of production, compared to our reference year of 2005.
WaterConsumptionIndex
Index Delfzijl
Index Emmen - yarn
Index Emmen after treatment
Index Arnhem
*) correction due to reporting error
34 Teijin Aramid | HSE Report 2018 35
19. At Teijin Aramid, everything we do is guided by our ambition to shape a better
future for generations to come. Day after day, we move forward, continuously
improving our processes, our technology and ourselves. As market leaders, we
drive progress through collaboration and set new standards for high performance.
We connect with our customers at every level, wherever they are in the world.
Because we believe that, together, we can be something bigger. Together, we can
challenge conformity.
From automotive and oil gas, to civil engineering, ballistic protection and beyond,
our products are empowering excellence in diverse markets and applications
around the globe. By enabling lighter, stronger and more resistant materials.
And by taking durability, protection and efficiency to new levels. Whether you
choose Twaron®, Teijinconex®, Technora® or Endumax®, our high-performance
materials are an enduring guarantee of reliability. You can be sure of that.
For more information
Please e-mail us at:
information@teijinaramid.com
or visit
www.teijinaramid.com
ta-8.1-20192606-en
www.teijinaramid.com
Disclaimer:thisdatareflectsourbestknowledgeatthetimeofpublication.Thecontentissubjecttochangeasaresultofnewdevelopments.Itonlycontainsaselectionofthe
propertiesoftheproduct(s)andismeantforcommercialuseonly.TeijinAramidgivesnowarrantiesanddoesnotacceptanyliabilityregarding(i)thefitnessoftheproductsforany
particularuse,(ii)thecorrectness,completenessandusageoftheinformation,(iii)theusageoftheproducts(iv)oranyinfringementofany(intellectualorindustrial)propertyofa
thirdparty.Allintellectualpropertyrightsregardingthispublicationarethepropertyof–orarelicensedto–TeijinAramid.Withoutourpriorwrittenconsent,thereproductionand
publishingof(partsof)thispublicationisprohibited.