Task 7 volume & pan
•Download as DOCX, PDF•
0 likes•139 views
This document discusses editing audio recordings using volume and panning controls in a software program. It describes how the controls allow the user to change the direction and volume of sounds, making them appear to come from different locations in a room. Clicking a small box brings up controls to adjust volume and panning for editing sounds using shift-click commands. This box displays all editing options for sounds through various commands.
Report
Share
Report
Share
Recommended
Naomi Cubase Presentation
To create a new project in Cubase, go to File and click New Project. Once the project is open, add instruments by clicking "add instrument" and selecting from the options. Draw notes on the bar area by clicking the draw button and placing notes where wanted. Play the song by pressing play to hear it. Equalization can be used to adjust frequencies and change the sound of the song.
Sample editing
The document provides instructions for selecting, trimming, and consolidating an individual piano note from a recorded sample of 10 notes played successively on an acoustic piano. The steps include selecting the best note, copying and pasting it into a new playlist, trimming the start and end to isolate just the note, adding short fade-ins and fade-outs, and finally consolidating the trimmed note into a single audio file.
Task 7 2 envelopes
Jake Hyatt describes using track envelopes in audio editing software to adjust volume and panning over time. He used volume envelopes to make two audio clips start quietly and get louder, then quieter, to add dynamics. For the third clip he used a pan envelope to create a sense of movement by panning the audio from left to right. Adjusting envelope points allowed him to control where the volume and pan levels changed over the duration of each audio track.
emotion wall
this is a slide for my fyp presentation seminar about emotion and how they can be represented in an abstract manner, using colour, shapes, animation and sound.
X men
This document provides a description and analysis of an interactive menu clip from the X-Men film franchise. The clip introduces two main characters who each create an interactive button through animation and visual effects to represent different sides in the film. Advanced techniques like rotation are used to keep the buttons rotating until the viewer makes a selection. The video is in 1080p resolution with a standard 4:3 aspect ratio to ensure compatibility across formats.
Cubase instruction guide
This document provides instructions for using various audio editing and effects tools in the Cubase digital audio workstation software. It explains how to import audio files, arrange tracks on the timeline, loop sections of audio, edit individual sounds, adjust volume and effects on tracks, and use dynamics processors like compressors and limiters as well as noise gates to control audio levels.
Print screens for final cut pro
This document provides steps for editing a video project in Final Cut Pro. It describes how to import clips by logging and capturing them, then renaming the clips and dragging them to the sequence timeline. Various editing techniques are covered like cutting clips, adding video effects, adjusting audio levels, and using transitions. The overall process of editing clips, adding background music, and a voiceover is explained through screenshots of the Final Cut Pro interface.
What have you learnt about technologies from the process of constructing this...
The document describes the various features and controls of a Sony DV camera. It discusses the lens at the front for capturing footage, the screen on the left side for viewing footage, and buttons on the side panel for settings like white balance. The back has buttons for lighting settings and modes. The right side has the power button. The left side has a compartment for inserting and ejecting tapes. Buttons along the top control recording. The microphone at the end records audio.
Recommended
Naomi Cubase Presentation
To create a new project in Cubase, go to File and click New Project. Once the project is open, add instruments by clicking "add instrument" and selecting from the options. Draw notes on the bar area by clicking the draw button and placing notes where wanted. Play the song by pressing play to hear it. Equalization can be used to adjust frequencies and change the sound of the song.
Sample editing
The document provides instructions for selecting, trimming, and consolidating an individual piano note from a recorded sample of 10 notes played successively on an acoustic piano. The steps include selecting the best note, copying and pasting it into a new playlist, trimming the start and end to isolate just the note, adding short fade-ins and fade-outs, and finally consolidating the trimmed note into a single audio file.
Task 7 2 envelopes
Jake Hyatt describes using track envelopes in audio editing software to adjust volume and panning over time. He used volume envelopes to make two audio clips start quietly and get louder, then quieter, to add dynamics. For the third clip he used a pan envelope to create a sense of movement by panning the audio from left to right. Adjusting envelope points allowed him to control where the volume and pan levels changed over the duration of each audio track.
emotion wall
this is a slide for my fyp presentation seminar about emotion and how they can be represented in an abstract manner, using colour, shapes, animation and sound.
X men
This document provides a description and analysis of an interactive menu clip from the X-Men film franchise. The clip introduces two main characters who each create an interactive button through animation and visual effects to represent different sides in the film. Advanced techniques like rotation are used to keep the buttons rotating until the viewer makes a selection. The video is in 1080p resolution with a standard 4:3 aspect ratio to ensure compatibility across formats.
Cubase instruction guide
This document provides instructions for using various audio editing and effects tools in the Cubase digital audio workstation software. It explains how to import audio files, arrange tracks on the timeline, loop sections of audio, edit individual sounds, adjust volume and effects on tracks, and use dynamics processors like compressors and limiters as well as noise gates to control audio levels.
Print screens for final cut pro
This document provides steps for editing a video project in Final Cut Pro. It describes how to import clips by logging and capturing them, then renaming the clips and dragging them to the sequence timeline. Various editing techniques are covered like cutting clips, adding video effects, adjusting audio levels, and using transitions. The overall process of editing clips, adding background music, and a voiceover is explained through screenshots of the Final Cut Pro interface.
What have you learnt about technologies from the process of constructing this...
The document describes the various features and controls of a Sony DV camera. It discusses the lens at the front for capturing footage, the screen on the left side for viewing footage, and buttons on the side panel for settings like white balance. The back has buttons for lighting settings and modes. The right side has the power button. The left side has a compartment for inserting and ejecting tapes. Buttons along the top control recording. The microphone at the end records audio.
Pathology course
Best pathology courses from Menzies Institute of Technology. This course provides you with the knowledge and skills to work as a pathology collector.
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
A Framework for Predicate Based Access Control Policies in Infrastructure as ...
Infrastructure as a Service (IaaS) is the service with which IT of enterprises integrated for on-demand services.
Different deployment models of cloud further makes it flexible so as to meet the requirements of users. As the
customers’ policies are not same, Cloud Service Provider (CSP) needs a flexible architecture to accommodate
the varied requirements of customers with respect to access control. The existing access control models such as
Role Based Access Control (RBAC) and Attribute Based Access Control (ABAC) have limitations. The
combination of RBAC and ABAC also could not offer fine grained access control. We also studied the RBAC
model offered by Open Stack and came to know its limitations in catering to diversified needs of customers. The
One Size Fits for All policy cannot provide flexible access control due to the aforementioned reason. Therefore
a more flexible access control model is required. In this paper we proposed a framework with Predicate Based
Access Control (PBAC) in general and then implemented it in Open Stack. Our empirical results revealed that
the proposed framework can improve the granularity with fine grained access control mechanism. Though our
framework is at primitive stage, it shows significant step forward in access control policies for IaaS clouds.
In vitro callus induction of Melothria purpusilla, a traditional medicinal pl...
Melothria purpusilla, a member of Cucurbitaceae, is an endemic species found in North-Eastern part of India.
The plant is used traditionally by the people of Manipur in the treatment of jaundice and its roots in fever and
diarrhoea. Tissue culture of medicinal plants was performed as a measure for the conservation of endangered
medicinal plants, Melothria perpusilla. Morphogenetic changes were observed in Melothria perpusilla
explants in the MS medium supplemented with different concentrations of PGRs. Different colours of callus
formation were observed in MS supplemented with BAP, kinetin and IBA. The best callus induction was
observed with MS media supplemented with combination of 1BAP mg/l + 1 IBA mg/l and combination of
1Kinetin mg/l + 1 IBA mg/l.
A Comparative Study of Load Balancing Algorithms for Cloud Computing
Cloud Computing is fast growing technology in both industry research and academy. User can access the cloud
service and pay based on the usage of resource. Balancing the load is major task of cloud service provider with
minimum response time, maximum throughput and better resource utilization. There are many load balancing
algorithms proposed to assign a user request to cloud resource in efficient manner. In this paper three load balancing
algorithms are simulated in Cloud Analyst and results are compared.
Hybridization of Meta-heuristics for Optimizing Routing protocol in VANETs
The goal of VANET is to establish a vehicular communication system which is reliable and fast which caters to
road safety and road safety. In VANET where network fragmentation is frequent with no central control, routing
becomes a challenging task. Planning an optimal routing plan for tuning parameter configuration of routing
protocol for setting up VANET is very crucial. This is done by defining an optimization problem where
hybridization of meta-heuristics is defined. The paper contributes the idea of combining meta-heuristic
algorithm to enhance the performance of individual search method for optimization problem.
Selected Physical Properties of Soybean In Relation To Storage Design
Bulk density, kernel density, internal friction of Soybean were measured over a moisture content range of 7.4 to
22.22%(wb). First and second order polynomial equations are given which describe the kernel density, bulk
density as well as other properties’ dependence on moisture content. For the grain that was tested, bulk density,
kernel density and specific gravity decreased with moisture content while angle of repose, angle of internal
friction and coefficient of sliding friction increased as moisture content increased. One thousand grain weight
and average diameter increased with moisture content for the crop. Frictional coefficients of the crop was
measured on four structural surface namely: concrete, wood, galvanized sheet metal and mild steel sheet. The
values were maximum for concrete among the four surfaces. The angle of repose was found to be higher than
angle of internal friction in all cases tested. These measurements are necessary in selection of the material and in
determination of pressures and angles of the wall of storage structures.
Optimization and simulation of a New Low Density Parity-Check Decoder using t...
The Low Density Parity-Check codes are one of the hottest topics in coding theory nowadays equipped with
very fast encoding and decoding algorithms, LDPC are very attractive both theoretically and practically.In this
article, we present a simulation of a work that has been accepted in an international journal. The newalgorithm
allows us to correct errors quickly and without iterations. We show that the proposed algorithm simulation can
be applied for both regular and irregular LDPC codes. First, we developed the design of the syndrome Block
Second, we generated and simulated the hardware description language source code using Quartus software
tools, and finally we show low complexity compared to the basic algorithm.
Благодарственное письмо ЗАО Строймаш
Благодарность клиента за работу по оспариванию кадастровой стоимости
Dli book 01 lesson 3.vocab
This document defines and provides examples of common parts of speech including nouns, verbs, and pronouns. Nouns refer to people, places or things. Verbs express actions. Pronouns take the place of nouns, such as he, she, it, we and they. Examples are given such as "He isn't Saudi" using the verb "to be" and pronoun "he". Common money denominations like cents, nickels, dimes and quarters are also listed as noun examples.
A Novel Feature Extraction Scheme for Medical X-Ray Images
X-ray images are gray scale images with almost the same textural characteristic. Conventional texture or color
features cannot be used for appropriate categorization in medical x-ray image archives. This paper presents a
novel combination of methods like GLCM, LBP and HOG for extracting distinctive invariant features from Xray
images belonging to IRMA (Image Retrieval in Medical applications) database that can be used to perform
reliable matching between different views of an object or scene. GLCM represents the distributions of the
intensities and the information about relative positions of neighboring pixels of an image. The LBP features are
invariant to image scale and rotation, change in 3D viewpoint, addition of noise, and change in illumination A
HOG feature vector represents local shape of an object, having edge information at plural cells. These features
have been exploited in different algorithms for automatic classification of medical X-ray images. Excellent
experimental results obtained in true problems of rotation invariance, particular rotation angle, demonstrate that
good discrimination can be achieved with the occurrence statistics of simple rotation invariant local binary
patterns.
Determination of Stress Concentration factor in Linearly Elastic Structures w...
Stress concentration is the localization of stress around stress raisers. Sudden changes in the geometry of
structures give rise to stress values that are higher than those obtained by elementary equations of solid
mechanics. Therefore the evaluation of stress state at such locations needs specialized techniques such as Finite
Element Method (FEM).The finite element method is a numerical procedure that can be used to obtain solution
to a large variety of engineering problems such as structural, thermal, heat transfer, electromagnetism and fluid
flow.
In the present investigation, focus has been kept on the finite element modeling and determination of stress
concentration factor (SCF) in linearly elastic structures with different stress-raisers such as circular and elliptical
holes and double semicircular notch at different locations in a finite plate. The results obtained from FEM are
compared with those obtained by analytical relations as given in literature. A commercially available finite
element solver ANSYS has been used for the modeling and analysis in the investigation. Throughout the
investigation, plane82, which is an eight node two-dimensional element is used for the discretization.
Renewable Energy Based Floating Power Generator (Rivers and Canals)
1) Researchers in India have developed a floating power generator system that can generate electricity from flowing water in rivers and canals without needing to be permanently installed.
2) The system consists of fiberglass floats connected to a water wheel that spins a waterproof generator as water flows between the floats.
3) Testing of a prototype in Mahi River in India showed it could generate up to 250 watts of power at a water flow rate of 6 cubic meters per second.
Performance evaluation of Maximum Power Point Tracking algorithm with buck dc...
The energy crisis concern leads to look for alternate source of energy. Solar energy is considered as most reliable
among the all renewable energy sources. Solar PV (Photovoltaic) is used to convert solar energy into electric
energy. The efficiency of solar PV is very low and its characteristic is nonlinear. To overcome these drawbacks a
technique known as maximum power point tracking is used. This algorithm is implemented in the control circuit
of DC – DC converter. The objective of this paper is to evaluate the MPPT (Maximum Power Point Tracking)
with buck DC-DC converter under load varying conditions. The simulation work is done using PSIM simulation
software.
Working in the freelance media sector
Freelancing in the media sector allows individuals to be self-employed and work independently from home or remotely. Freelancers work on brief assignments and projects for different employers and are paid based on the quantity and quality of work completed. Some advantages of freelancing include being your own boss, flexibility, and variety in work, while disadvantages can include isolation, lack of benefits and job security, and irregular income. Freelance contracts outline payment terms, deliverables, and obligations of both parties.
Neil rogero prepare a pitch - presentation
Neil Rogero is preparing a pitch for a 3D project that will have a realistic, modern style inspired by real life holiday resorts. The project will use Unity engine and modeling software like Lightwave and Blender to create a detailed 3D environment with small open spaces and realistic lighting effects.
Unit 20 brief 1 task 2_worksheet
The document provides definitions for several key terms related to computer hardware technologies for game platforms. It defines human-computer interface as the study of how humans interact with computers and the design of user-friendly interfaces. It explains that the CPU is the central component that processes information in a computer. Graphics processing units or GPUs are used to render graphics and handle visually intensive tasks. Memory (RAM) is used for temporary storage and more RAM allows for better computer performance. The power supply provides electricity to power the entire system.
More Related Content
Viewers also liked
Pathology course
Best pathology courses from Menzies Institute of Technology. This course provides you with the knowledge and skills to work as a pathology collector.
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
A Framework for Predicate Based Access Control Policies in Infrastructure as ...
Infrastructure as a Service (IaaS) is the service with which IT of enterprises integrated for on-demand services.
Different deployment models of cloud further makes it flexible so as to meet the requirements of users. As the
customers’ policies are not same, Cloud Service Provider (CSP) needs a flexible architecture to accommodate
the varied requirements of customers with respect to access control. The existing access control models such as
Role Based Access Control (RBAC) and Attribute Based Access Control (ABAC) have limitations. The
combination of RBAC and ABAC also could not offer fine grained access control. We also studied the RBAC
model offered by Open Stack and came to know its limitations in catering to diversified needs of customers. The
One Size Fits for All policy cannot provide flexible access control due to the aforementioned reason. Therefore
a more flexible access control model is required. In this paper we proposed a framework with Predicate Based
Access Control (PBAC) in general and then implemented it in Open Stack. Our empirical results revealed that
the proposed framework can improve the granularity with fine grained access control mechanism. Though our
framework is at primitive stage, it shows significant step forward in access control policies for IaaS clouds.
In vitro callus induction of Melothria purpusilla, a traditional medicinal pl...
Melothria purpusilla, a member of Cucurbitaceae, is an endemic species found in North-Eastern part of India.
The plant is used traditionally by the people of Manipur in the treatment of jaundice and its roots in fever and
diarrhoea. Tissue culture of medicinal plants was performed as a measure for the conservation of endangered
medicinal plants, Melothria perpusilla. Morphogenetic changes were observed in Melothria perpusilla
explants in the MS medium supplemented with different concentrations of PGRs. Different colours of callus
formation were observed in MS supplemented with BAP, kinetin and IBA. The best callus induction was
observed with MS media supplemented with combination of 1BAP mg/l + 1 IBA mg/l and combination of
1Kinetin mg/l + 1 IBA mg/l.
A Comparative Study of Load Balancing Algorithms for Cloud Computing
Cloud Computing is fast growing technology in both industry research and academy. User can access the cloud
service and pay based on the usage of resource. Balancing the load is major task of cloud service provider with
minimum response time, maximum throughput and better resource utilization. There are many load balancing
algorithms proposed to assign a user request to cloud resource in efficient manner. In this paper three load balancing
algorithms are simulated in Cloud Analyst and results are compared.
Hybridization of Meta-heuristics for Optimizing Routing protocol in VANETs
The goal of VANET is to establish a vehicular communication system which is reliable and fast which caters to
road safety and road safety. In VANET where network fragmentation is frequent with no central control, routing
becomes a challenging task. Planning an optimal routing plan for tuning parameter configuration of routing
protocol for setting up VANET is very crucial. This is done by defining an optimization problem where
hybridization of meta-heuristics is defined. The paper contributes the idea of combining meta-heuristic
algorithm to enhance the performance of individual search method for optimization problem.
Selected Physical Properties of Soybean In Relation To Storage Design
Bulk density, kernel density, internal friction of Soybean were measured over a moisture content range of 7.4 to
22.22%(wb). First and second order polynomial equations are given which describe the kernel density, bulk
density as well as other properties’ dependence on moisture content. For the grain that was tested, bulk density,
kernel density and specific gravity decreased with moisture content while angle of repose, angle of internal
friction and coefficient of sliding friction increased as moisture content increased. One thousand grain weight
and average diameter increased with moisture content for the crop. Frictional coefficients of the crop was
measured on four structural surface namely: concrete, wood, galvanized sheet metal and mild steel sheet. The
values were maximum for concrete among the four surfaces. The angle of repose was found to be higher than
angle of internal friction in all cases tested. These measurements are necessary in selection of the material and in
determination of pressures and angles of the wall of storage structures.
Optimization and simulation of a New Low Density Parity-Check Decoder using t...
The Low Density Parity-Check codes are one of the hottest topics in coding theory nowadays equipped with
very fast encoding and decoding algorithms, LDPC are very attractive both theoretically and practically.In this
article, we present a simulation of a work that has been accepted in an international journal. The newalgorithm
allows us to correct errors quickly and without iterations. We show that the proposed algorithm simulation can
be applied for both regular and irregular LDPC codes. First, we developed the design of the syndrome Block
Second, we generated and simulated the hardware description language source code using Quartus software
tools, and finally we show low complexity compared to the basic algorithm.
Благодарственное письмо ЗАО Строймаш
Благодарность клиента за работу по оспариванию кадастровой стоимости
Dli book 01 lesson 3.vocab
This document defines and provides examples of common parts of speech including nouns, verbs, and pronouns. Nouns refer to people, places or things. Verbs express actions. Pronouns take the place of nouns, such as he, she, it, we and they. Examples are given such as "He isn't Saudi" using the verb "to be" and pronoun "he". Common money denominations like cents, nickels, dimes and quarters are also listed as noun examples.
A Novel Feature Extraction Scheme for Medical X-Ray Images
X-ray images are gray scale images with almost the same textural characteristic. Conventional texture or color
features cannot be used for appropriate categorization in medical x-ray image archives. This paper presents a
novel combination of methods like GLCM, LBP and HOG for extracting distinctive invariant features from Xray
images belonging to IRMA (Image Retrieval in Medical applications) database that can be used to perform
reliable matching between different views of an object or scene. GLCM represents the distributions of the
intensities and the information about relative positions of neighboring pixels of an image. The LBP features are
invariant to image scale and rotation, change in 3D viewpoint, addition of noise, and change in illumination A
HOG feature vector represents local shape of an object, having edge information at plural cells. These features
have been exploited in different algorithms for automatic classification of medical X-ray images. Excellent
experimental results obtained in true problems of rotation invariance, particular rotation angle, demonstrate that
good discrimination can be achieved with the occurrence statistics of simple rotation invariant local binary
patterns.
Determination of Stress Concentration factor in Linearly Elastic Structures w...
Stress concentration is the localization of stress around stress raisers. Sudden changes in the geometry of
structures give rise to stress values that are higher than those obtained by elementary equations of solid
mechanics. Therefore the evaluation of stress state at such locations needs specialized techniques such as Finite
Element Method (FEM).The finite element method is a numerical procedure that can be used to obtain solution
to a large variety of engineering problems such as structural, thermal, heat transfer, electromagnetism and fluid
flow.
In the present investigation, focus has been kept on the finite element modeling and determination of stress
concentration factor (SCF) in linearly elastic structures with different stress-raisers such as circular and elliptical
holes and double semicircular notch at different locations in a finite plate. The results obtained from FEM are
compared with those obtained by analytical relations as given in literature. A commercially available finite
element solver ANSYS has been used for the modeling and analysis in the investigation. Throughout the
investigation, plane82, which is an eight node two-dimensional element is used for the discretization.
Renewable Energy Based Floating Power Generator (Rivers and Canals)
1) Researchers in India have developed a floating power generator system that can generate electricity from flowing water in rivers and canals without needing to be permanently installed.
2) The system consists of fiberglass floats connected to a water wheel that spins a waterproof generator as water flows between the floats.
3) Testing of a prototype in Mahi River in India showed it could generate up to 250 watts of power at a water flow rate of 6 cubic meters per second.
Performance evaluation of Maximum Power Point Tracking algorithm with buck dc...
The energy crisis concern leads to look for alternate source of energy. Solar energy is considered as most reliable
among the all renewable energy sources. Solar PV (Photovoltaic) is used to convert solar energy into electric
energy. The efficiency of solar PV is very low and its characteristic is nonlinear. To overcome these drawbacks a
technique known as maximum power point tracking is used. This algorithm is implemented in the control circuit
of DC – DC converter. The objective of this paper is to evaluate the MPPT (Maximum Power Point Tracking)
with buck DC-DC converter under load varying conditions. The simulation work is done using PSIM simulation
software.
Viewers also liked (19)
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
Làm giấy phép an toàn vệ sinh thực phẩm Bình Dương
A Framework for Predicate Based Access Control Policies in Infrastructure as ...
A Framework for Predicate Based Access Control Policies in Infrastructure as ...
In vitro callus induction of Melothria purpusilla, a traditional medicinal pl...
In vitro callus induction of Melothria purpusilla, a traditional medicinal pl...
A Comparative Study of Load Balancing Algorithms for Cloud Computing
A Comparative Study of Load Balancing Algorithms for Cloud Computing
Hybridization of Meta-heuristics for Optimizing Routing protocol in VANETs
Hybridization of Meta-heuristics for Optimizing Routing protocol in VANETs
Selected Physical Properties of Soybean In Relation To Storage Design
Selected Physical Properties of Soybean In Relation To Storage Design
Optimization and simulation of a New Low Density Parity-Check Decoder using t...
Optimization and simulation of a New Low Density Parity-Check Decoder using t...
A Novel Feature Extraction Scheme for Medical X-Ray Images
A Novel Feature Extraction Scheme for Medical X-Ray Images
Determination of Stress Concentration factor in Linearly Elastic Structures w...
Determination of Stress Concentration factor in Linearly Elastic Structures w...
Renewable Energy Based Floating Power Generator (Rivers and Canals)
Renewable Energy Based Floating Power Generator (Rivers and Canals)
Performance evaluation of Maximum Power Point Tracking algorithm with buck dc...
Performance evaluation of Maximum Power Point Tracking algorithm with buck dc...
More from NeilRogero
Working in the freelance media sector
Freelancing in the media sector allows individuals to be self-employed and work independently from home or remotely. Freelancers work on brief assignments and projects for different employers and are paid based on the quantity and quality of work completed. Some advantages of freelancing include being your own boss, flexibility, and variety in work, while disadvantages can include isolation, lack of benefits and job security, and irregular income. Freelance contracts outline payment terms, deliverables, and obligations of both parties.
Neil rogero prepare a pitch - presentation
Neil Rogero is preparing a pitch for a 3D project that will have a realistic, modern style inspired by real life holiday resorts. The project will use Unity engine and modeling software like Lightwave and Blender to create a detailed 3D environment with small open spaces and realistic lighting effects.
Unit 20 brief 1 task 2_worksheet
The document provides definitions for several key terms related to computer hardware technologies for game platforms. It defines human-computer interface as the study of how humans interact with computers and the design of user-friendly interfaces. It explains that the CPU is the central component that processes information in a computer. Graphics processing units or GPUs are used to render graphics and handle visually intensive tasks. Memory (RAM) is used for temporary storage and more RAM allows for better computer performance. The power supply provides electricity to power the entire system.
Je unit 72 & 74 assignment brief
The document provides an assignment brief for a Level 3 Diploma in Creative Media Production unit on computer game story development. Students must create a short comic or graphic novel extract featuring themselves as the main character. They will research storytelling techniques, write and illustrate the story, and present their work in a group critique. The goal is to understand storytelling elements for games and create an original story and dialogue following industry practices.
Ha7and ha8 submission_declaration
This document contains a learner assessment submission and declaration form for Neil Rogero. It details the assignments and tasks submitted for the Extended Diploma in Creative Media Production – Games Development program. Neil submitted work for two assignments (HA7 - 3D The Basics and HA8 - Sidekick) across multiple tasks. He declared that the evidence submitted was his own work and included appropriate citations.
Assessment submission declaration
This document is a learner assessment submission and declaration form completed by Neil Rogero for an assignment on computer game audio cut sequence production. It lists the 11 tasks of the assignment and provides links to blog posts where the evidence for each task can be found. At the bottom, Neil signs to declare that the submitted work is his own original work.
Ig2 task 1 work sheet (improved version)
The document provides definitions and explanations of various terms related to sound design and production for computer games. It includes a glossary with over 15 terms defined, with each definition citing a source URL. For each term, the author also provides a short description of how the term relates to their own production practice. The terms cover areas such as sound file formats, audio limitations, audio recording systems, and more. The document appears to be an assignment where the author was asked to research and define sound design terms as part of their studies.
Presentaion script & q cards
The script is for an action-adventure game that was influenced by Halo, Rogue Galaxy, and Guardians of the Galaxy. It involves two bounty hunters, Lana and Axel, who have Scottish and English accents respectively, going to an old space ship to retrieve a lost treasure but encountering hostile droids. They finally make it past the droids but find the treasure has an impossible lock system. The presentation will discuss producing character voices, adding sound effects and music to enhance the gameplay experience.
Programming sounds to my game task 11
The programmer added laser and missile sound effects to their game by double clicking the sound tools and uploading new sound effects they created. They then coded the missile and laser objects to play the correct sounds when used in the game.
Ha8 research - task 2
This document contains 5 image links of action figures from popular superhero franchises. The images show an Iron Man figure in a large mechanical suit battling Hulk, a robot from the movie Real Steel, Spider-Man swinging through the city, a new Iron Man suit from Avengers: Age of Ultron, and War Machine in combat armor.
Task 8 vst sound effects
The document discusses creating sound effects using a MIDI keyboard and VST SoundEffects software. The author used the eSLine String(x86bridged) keyboard effect to make sound effects by adjusting settings like bass, tune, and volume. Careful listening was required to select sounds that fit the project. The hardest part was placing each sound bar in the right place to make all the sounds flow well together as a whole piece.
Task 8 vst recording
The document discusses creating sound effects using a MIDI keyboard and VST SoundEffects software. The author used the eSLine String(x86bridged) keyboard effect to create simple sound effects by adjusting the bass, tune, and volume settings. They listened carefully to different sound combinations to select those that fit best for their project. The hardest part was carefully placing each sound bar in the right place to make all the sounds flow well together as a cohesive whole piece.
Task 1 thor
Thor is the son of Odin, the ruler of Asgard, and Gaea, the embodiment of Earth. He was born centuries ago in Norway and raised in Asgard to be the god of thunder and heir to the throne. As the god of thunder, Thor commands lightning, wind and storms with his hammer Mjolnir. Mjolnir gives Thor the power of flight and helps him channel his elemental powers, though it can only be lifted by those deemed worthy. After growing too proud, Thor was banished to Earth by Odin to learn humility.
Task 1 captain america
Steve Rogers was a young American patriot who wanted to serve his country in World War 2 but was rejected from the army due to being small and sickly. He was chosen for an experimental super soldier program led by Dr. Abraham Erskine. After receiving the super soldier serum, Rogers gained enhanced strength, speed, senses and physiology. He became the superhero Captain America, fighting for justice and liberty with his unwavering courage and morale.
Spacehunter
1) Axelon Gaze, a human space explorer, and Lana, a Spartan bounty hunter, are traveling across the volcanic moon Rubeus with destroyed droids to reach a crashed space fighter.
2) The droids power down, forcing Axel and Lana to continue on foot. They find signs they are being hunted by Rubian Wolfmen.
3) Axel and Lana reach the immense, ancient space fighter overgrown with vegetation. Lana is untrusting of Axel's promise to pay her once the cargo is safely delivered, sensing danger from the vessel's anti-looting security systems.
Spacehunter
1) Axelon Gaze, a human space explorer, and Lana, a Spartan bounty hunter, are traveling across the volcanic moon Rubeus with destroyed droids to reach a crashed space fighter.
2) The droids power down, forcing Axel and Lana to continue on foot. They find signs they are being hunted by Rubian Wolfmen.
3) Axel and Lana reach the immense, ancient space fighter covered in vegetation. Lana is wary of Axel's intentions regarding the bounty from the fighter's cargo, leading to tensions between the two explorers.
Presentaion script
The script presented is an action and adventure genre influenced by games such as Halo, Rogue Galaxy, and Guardians of the Galaxy. Two bounty hunters, Lana and Axel, have an aggressive conversation in English and Scottish accents while encountering troubles and hostile droids on their mission to retrieve lost treasure from an old spaceship. The production will include recorded character dialog, sound effects for doors, engines, weapons, and added background music and noises.
Presentaion script
The script presented is an action and adventure genre influenced by games such as Halo, Rogue Galaxy, and Guardians of the Galaxy. Two bounty hunters, Lana and Axel, have an aggressive conversation in English and Scottish accents while encountering troubles and hostile droids on an old spaceship during a treasure hunt. The production will include recorded character dialog, sound effects for doors, engines, weapons, and background music and noises added through software.
Task 7 vst
The document describes testing various audio effects virtual studio technology (VST) plugins by applying different effects to recordings and adjusting their properties. The author double clicked on sound effects to open an effects box showing commands, clicked "Take FX" to apply them, and a second box appeared to allow adjusting the altered sound, offering a variety of effect choices to change the sound.
More from NeilRogero (20)
Recently uploaded
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta 2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
buy old yahoo accounts buy yahoo accounts
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
CALL 8867766396 SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA | DPBOSS GUESSING | TARA MATKA | KALYAN CHART | MATKA BOSS
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
-- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSRecently uploaded (20)
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Call 8867766396 Satta Matka Dpboss Matka Guessing Satta batta Matka 420 Satta...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Task 7 volume & pan
- 1. Task 7 – AudioRecordingVST Thispart I editedthe soundbyusing the volume andpan commanditlets me make any type of soundcome throughthe leftside of the room to the otherby makingitcome in differentdirections. Clickon thissmall box andit would come up and showsthe volume and panningtochange the sound.
- 2. Whenyouclick onthisa small box popsup and showsthe volume and pan sectionandticksbothboxes and thiswill letyoueditanysound by pressingonthe Shiftandleftclick command. Thisis the box that popsup and showsthe entire commandliston whatyou coulddo withthe sound and how youwouldbe able to edit that sound.