Take A Breath 2012 - 3 Edition
•
1 like•470 views
This document announces a workshop hosted by Loccioni Group on the future of internal combustion engines and powertrain systems. The workshop will take place on June 28-29, 2012 at Loccioni Headquarters in Ancona, Italy. It will include presentations and roundtable discussions on topics such as the evolution of gasoline and diesel engines through 2020, GDI engines and powertrain systems, Volkswagen's new modular TDI generation, and future scenarios for the automotive industry. Presenters will represent companies such as Fiat, Ricardo, Ferrari, Bosch, Daimler, Delphi, Continental, Cummins, IAV, and Denso.
Report
Share
Report
Share
Download to read offline
Recommended
Agenda Take A Breath 2016
This document provides an agenda and logistics information for the "Take a Breath" automotive industry event hosted by Loccioni from September 19-20, 2016. The event will include keynote speeches on future mobility trends, roundtable discussions on powertrain technologies, and focus groups on topics like internal combustion engines, electrification, and autonomous driving. It will be held at Loccioni's headquarters and new testing facility in Angeli di Rosora, Italy, and include transportation between hotels, meals, and a tour of Loccioni labs.
Take A Breath 2012
This document announces a workshop hosted by Loccioni Group on the future of internal combustion engines and powertrain systems. The workshop will take place on June 28-29, 2012 at Loccioni Headquarters in Ancona, Italy. It will include presentations and roundtable discussions on topics such as the evolution of gasoline and diesel engines through 2020, GDI engines and powertrain systems, Volkswagen's new modular TDI generation, and future scenarios for the automotive industry. Presenters will represent companies such as Fiat, Ricardo, Ferrari, Bosch, Daimler, Delphi, Continental, Cummins, IAV, and Denso.
E-Mobility_en
The document summarizes an event called the 2014 E-Mobility Technology China Forum that will take place from June 25-27 in Shenyang, China. Over 100 leading enterprises, 40 OEMs from China and abroad, and 30 leading lithium-battery manufacturers will participate. There will be keynote speeches and panels on topics like e-vehicle industry trends in China, battery safety requirements, motor and electrical powertrain technologies, and charging infrastructure standards and business models. The event aims to promote technological progress in new energy vehicles and discuss development trends in e-mobility.
Industrial Photography Portfolio - June 2014
This document profiles Yulianus Firmansyah Ladung, an industrial photographer specializing in oil, gas, coal, and other industries. It outlines his extensive experience in these fields and safety certifications. It also lists some of the companies he has done photography work for, including Citibank, Liebherr, and Pertamina. The bulk of the document consists of example photos taken in industrial settings with humans, machinery, and facilities as the main subjects. It promotes Ladung's skills in capturing these types of images for corporate and media clients.
Abridged #DallaraBrookesStoryBook
Academic staff and MSc students in the Department of Mechanical Engineering and Mathematical Sciences at Oxford Brookes University have been developing an electric racing car in collaboration with Dallara Automobile, project chaired by Head of R&D and US Racing Business Leader, Andrea Toso.
To provide an overview of the project & showcase excellent work of our students from all over the world (and hopefully capture your imagination to get involved!) here is the abridged version of our #DallaraBrookesStoryBook, first exhibited at Autosport International Show 2015.
Tesla Model S:Making the most of the greatest car in the world
The document discusses Tesla Motors and the Tesla Model S electric vehicle. It states that TESLIVE and TMC are independent of Tesla Motors. It provides positive commentary about the Tesla Model S, describing it as the "greatest car in the world" and comparing owning one to the Apollo space program. It discusses the surprise and pride people feel about Tesla and the Model S.
ATCI : 25th Anniversary: Ever Onward; Dinner Talk 18 September 2014
This document provides an agenda and details for the 25th anniversary celebration of the Association of Thai ICT Industry (ATCI) being held on September 18-19, 2014 in Bangkok, Thailand. The event will include conferences on emerging technologies and their impact on regional economic cooperation, as well as panels on workforce mobility and national reforms. Keynote speakers will represent leading technology companies. The anniversary celebration will recognize contributors and include a gala dinner. Registration fees and sponsorship packages are listed. The venue is the Swissotel Le Concorde in Bangkok.
Automobile platforms
The document provides an overview of automobile platforms and the future of mobility. It discusses the history of automobiles and their evolution. Key points include:
- An automobile platform includes common components like the chassis, suspension, steering, and drivetrain that can be shared between vehicles.
- Connected cars that communicate with each other and infrastructure are a growing trend, improving safety and reducing traffic.
- Electric vehicles sales are increasing rapidly and many predict they will soon surpass gasoline vehicles.
- Artificial intelligence and machine learning are being applied to areas like autonomous vehicles, predictive maintenance, and traffic optimization.
- The future of mobility involves new shared, electric, and autonomous transportation models that could significantly change transportation systems
Recommended
Agenda Take A Breath 2016
This document provides an agenda and logistics information for the "Take a Breath" automotive industry event hosted by Loccioni from September 19-20, 2016. The event will include keynote speeches on future mobility trends, roundtable discussions on powertrain technologies, and focus groups on topics like internal combustion engines, electrification, and autonomous driving. It will be held at Loccioni's headquarters and new testing facility in Angeli di Rosora, Italy, and include transportation between hotels, meals, and a tour of Loccioni labs.
Take A Breath 2012
This document announces a workshop hosted by Loccioni Group on the future of internal combustion engines and powertrain systems. The workshop will take place on June 28-29, 2012 at Loccioni Headquarters in Ancona, Italy. It will include presentations and roundtable discussions on topics such as the evolution of gasoline and diesel engines through 2020, GDI engines and powertrain systems, Volkswagen's new modular TDI generation, and future scenarios for the automotive industry. Presenters will represent companies such as Fiat, Ricardo, Ferrari, Bosch, Daimler, Delphi, Continental, Cummins, IAV, and Denso.
E-Mobility_en
The document summarizes an event called the 2014 E-Mobility Technology China Forum that will take place from June 25-27 in Shenyang, China. Over 100 leading enterprises, 40 OEMs from China and abroad, and 30 leading lithium-battery manufacturers will participate. There will be keynote speeches and panels on topics like e-vehicle industry trends in China, battery safety requirements, motor and electrical powertrain technologies, and charging infrastructure standards and business models. The event aims to promote technological progress in new energy vehicles and discuss development trends in e-mobility.
Industrial Photography Portfolio - June 2014
This document profiles Yulianus Firmansyah Ladung, an industrial photographer specializing in oil, gas, coal, and other industries. It outlines his extensive experience in these fields and safety certifications. It also lists some of the companies he has done photography work for, including Citibank, Liebherr, and Pertamina. The bulk of the document consists of example photos taken in industrial settings with humans, machinery, and facilities as the main subjects. It promotes Ladung's skills in capturing these types of images for corporate and media clients.
Abridged #DallaraBrookesStoryBook
Academic staff and MSc students in the Department of Mechanical Engineering and Mathematical Sciences at Oxford Brookes University have been developing an electric racing car in collaboration with Dallara Automobile, project chaired by Head of R&D and US Racing Business Leader, Andrea Toso.
To provide an overview of the project & showcase excellent work of our students from all over the world (and hopefully capture your imagination to get involved!) here is the abridged version of our #DallaraBrookesStoryBook, first exhibited at Autosport International Show 2015.
Tesla Model S:Making the most of the greatest car in the world
The document discusses Tesla Motors and the Tesla Model S electric vehicle. It states that TESLIVE and TMC are independent of Tesla Motors. It provides positive commentary about the Tesla Model S, describing it as the "greatest car in the world" and comparing owning one to the Apollo space program. It discusses the surprise and pride people feel about Tesla and the Model S.
ATCI : 25th Anniversary: Ever Onward; Dinner Talk 18 September 2014
This document provides an agenda and details for the 25th anniversary celebration of the Association of Thai ICT Industry (ATCI) being held on September 18-19, 2014 in Bangkok, Thailand. The event will include conferences on emerging technologies and their impact on regional economic cooperation, as well as panels on workforce mobility and national reforms. Keynote speakers will represent leading technology companies. The anniversary celebration will recognize contributors and include a gala dinner. Registration fees and sponsorship packages are listed. The venue is the Swissotel Le Concorde in Bangkok.
Automobile platforms
The document provides an overview of automobile platforms and the future of mobility. It discusses the history of automobiles and their evolution. Key points include:
- An automobile platform includes common components like the chassis, suspension, steering, and drivetrain that can be shared between vehicles.
- Connected cars that communicate with each other and infrastructure are a growing trend, improving safety and reducing traffic.
- Electric vehicles sales are increasing rapidly and many predict they will soon surpass gasoline vehicles.
- Artificial intelligence and machine learning are being applied to areas like autonomous vehicles, predictive maintenance, and traffic optimization.
- The future of mobility involves new shared, electric, and autonomous transportation models that could significantly change transportation systems
SCR - Selective Catalytic Reduction
With the global drive to reduce the level of NOx and CO2 emissions from diesel engine exhausts, Selective Catalytic Reduction (SCR) systems with high conversion efficiency will be the key to providing cost effective solutions to the industry. The EU's upcoming regulations for the implementation of PEMS (Portable Emission Measurement Equipment) measurements in regard of Real Driving Emissions (RDE) will increase the requirements for the performance of SCR systems: Highest efficiency will be required under a wide range of operating conditions.
Moreover, the industry trend goes to an integration of different functions within the system. The combination of DPF and SCR coated catalyst reduces the weight of the whole system, but has caused several technical challenges that have not yet been fully solved.
The SCR-coated DPF has to stand tightened requirements of robustness and efficiency. Due to fuel saving measures, exhaust gas temperatures become lower, which highly affects the performance and requirements of the system.
- Exchange with international experts on how to incorporate SCR technology with all its various components in existing vehicle platforms
- Hear about the latest innovations in validation and testing and examine methods for sensors, catalysts and OBD functions with regard to DeNOx –technologies
- Discuss with leading specialists on how SCR system space can be optimized and sufficient exhaust system temperatures be achieved without compromising fuel consumption
- Develop strategies on how to best prepare your SCR development strategies for reducing real driving emissions
Discuss pressing topics with e.g. Michael Fischer, Section Leader Powertrain Technology at Honda R&D Europe, Bret Zimmerman, SCR Calibration Senior Engineer at Ford Motor Company or Dr. Thomas Garbe, Team Leader Fuels at Volkswagen AG...
http://bit.ly/SCR2014
World Automotive Conference 2019 - Brochure
Welcome to the 6th Annual World Automotive Conference in Istanbul!
We would like to thank you all for your growing interest and continued support for making the event what it is today. Special thanks to our international and local speakers for sharing their expertise. We hope you find today useful to your business, that you discuss mutual experiences and new knowledge, and meet with potential future business partners…
Daimler, Audi, and Volvo, at Advanced E-Motor - Advanced E-Motor Technology C...
Preview of the 7th E-Motor Conference 2019 Agenda, taking place at the Hotel Palace Berlin. Get the full Agenda here: http://bit.ly/E-Motor_Agenda_2019
JLR, Volvo Cars, Eaton Germany, CNH Industrial, Valeo | 8th International Con...
IQPC is due to organise the leading European conference on the topic of Advanced Downsizing & Turbocharging in Stuttgart between the 9-10 March 2016.
Don't miss this opportunity to hear expert presentations, take part in interactive workshops and meet with automotive downsizing and turbocharging experts from around the world. Download the agenda here: http://bit.ly/Agenda_Downsizing2016
7th Annual Advancements in Automotive Light-Weighting Summit
Taking place May 18-20 in Detroit IQPC is excited to share this all new and improved program. Continuing the trend we have developed over the years of bringing you the next generation automotive light-weighting developments; this 2015 summit will elevate your organizational efforts to achieve CAFÉ compliance and industry preeminence.
CON6393_S&M_BR_01_04_WEB
This document provides information about the "Simulation and Modelling 2016" knowledge transfer conference, which will take place on September 13-14, 2016 in Birmingham. The conference will discuss how simulations can replace physical testing and reduce costs in the automotive and aerospace industries. Day 1 will focus on automotive simulation and modelling, while Day 2 will discuss aerospace. The conference will address the latest developments in computer-aided engineering and how it is revolutionizing design, testing, and manufacturing. It will also cover challenges around integration, optimization, and validation of simulations. The agenda lists speakers from companies like Jaguar Land Rover, Rolls-Royce, and Boeing who will discuss their work in these areas.
Bos june 2017
This document outlines the program educational objectives, curriculum development process, career paths, program outcomes, technical skills, and subjects for an Automobile Engineering program. The objectives are to meet industry and research needs, encourage higher education, and promote entrepreneurship. The curriculum aims to develop sound technical and professional skills. Career paths include manufacturing, design, research, and government roles. Program outcomes include skills in problem solving, design, safety, and lifelong learning. Technical skills and correlating subjects are listed to enhance abilities in areas like repair, drafting, analytics, and alternative fuels. Suggested curriculum modifications are provided.
Volvo Cars, Hyundai Motor, GKN Driveline Confirm | Early Bird Discount Ends S...
The leading European conference on the topic of Advanced All Wheel Drive Systems is due to take place in Frankfurt between the 22-23 June 2015. Don't miss your chance to hear expert presentations, take part in interactive workshops and meet with AWD experts from around the world.
There are limited places available, so make sure you secure your conference ticket today! Learn more here.
Some of the companies that have confirmed their participation are:
• Volvo Car Group • Hyundai Motor • National Electric Vehicle Sweden AB • GKN Driveline • BorgWarner TorqTransfer Systems • AAM Europe GmbH • Punch Powertrain N.V. • LG Chem Ltd • Nissan Motor Manufacturing • Renault • Valeo Equipements Electriques Moteur • ZF Friedrichshafen • NIRA Dynamics • Controlled Power Technologies • Sonceboz Automotive
Visit the website at: http://bit.ly/AWD_SP_Website
Download the agenda here: http://bit.ly/AWD_SP_Agenda
Workshop Hannover ANFIA-ANIE 2010
Sustainable mobility: the Italian technological challenge - An innovative paradigm for a new vehicles' generation - Hannover (Germany), 19 april 2010
Automotive NVH (in co-operation with Bentley Motors Limited)
VISIT THE CONFERENCE WEBSITE HERE - http://bit.ly/NVH_Slideshare_Website
With contributions from 10 international OEM companies!
The advent of electrical, electronic and mechatronic fields have demonstrated the potential of not just reducing noise and vibration in vehicle using active technologies, but has also generated the scope of introducing sounds and vibrations that could drive positive emotional response. This is a major requirement for high performance cars and is also growing its importance in the field of mass-produced vehicles.
This conference will seek to explore the latest challenges in this area and unique solutions that industry leaders are employing to move things forward.
We hope that you can join us in Crewe, the home of Bentley Motors Limited and help us make this event successful and regular in the automotive NVH calendar.
• Explore advanced passive and active NVH control-solutions, to save weight and
costs while optimising CO2 efficiency and passenger comfort
• Gain insight into advanced measuring, testing and simulation tools in a
virtual reality context for definition and development of integrated solutions that
meet passengers´perception and needs
• Explore psychoacoustics, sound branding and personalised acoustic options to
differentiate from competitors and ensure a unique acoustic driving experience
• Hear about advanced technologies and sound synthesis for Noise Optimisation
in EV/HEVs and high performance cars
• Find out about powertrain and vehicle refinement with smart materials and
innovative measuring systems that ensure low cost
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]Israel Export Institute - מכון היצוא הישראלי
This document provides an overview of a leading global automotive supplier with €20.7 billion in total sales. It has 103,000 employees working across 330 sites in 34 countries. The company has a strong presence in North America, Asia, and Europe with over 6,000 engineers working in R&D. It is a leader in automotive seating, interior systems, and emissions control technologies.CON6420_ATPD_16_BR_01_08_WEB
This document summarizes an automotive technicians' professional development forum that will take place from October 20-21, 2016 in Coventry, UK. The forum will provide opportunities for technicians to advance their technical skills and career progression through industry presentations, site visits, workshops, and networking. Key speakers will discuss topics like career paths, changing skill requirements, and future challenges in automotive engineering. The event aims to help technicians gain expertise, expand their industry knowledge, and develop professional networks.
pune auto expo 2017
The document provides information about Auto Expo 2017, an upcoming automotive exhibition in Pune, India. The expo aims to showcase latest automotive products, technology, research, and achievements. It will include conferences on automotive topics, a student pavilion displaying vehicle designs, and factory visits. Market leaders in various automotive segments like Maruti Suzuki, Tata Motors, and Bajaj Auto will exhibit. Technical conferences on safety, green vehicles, and other topics are planned with international and national speakers. The expo aims to be an interaction platform for industry and academia to bridge skill gaps in the workforce.
Practitioners and the profession: a changing landscape, 8th September 2015
Practitioners and the profession: a changing landscape, 8th September 2015Association for Project Management
The APM South Wales & West of England (SWWE) branch was approached by Babcock International who wished to sponsor an event to promote diversity in the workplace, a subject they take very seriously. SWWE and the Women in Project Management (WiPM) SIG, worked together with Babcock staff to organise this event.
Gavin Leckie, Submarines Programme and Operations Director, supported by Sarah Beck and Lisa Radford, explained why Babcock take diversity so seriously. Babcock anticipates a skills shortage and difficulty in attracting sufficient skilled and qualified staff to meet future demand. They have too many white, middle-aged males, and recognise that they need to attract and retain skills from across the spectrum of the whole population and aim to get a better balance between male and female staff. Sponsoring this event shows how seriously Babcock takes the issue to the profession and their own staff.
Teri Okoro, the WiPM SiG Chair, explained about the work of the WiPM SIG in promoting the role of women in the profession to increase the current 17% representation. This is however much better in the younger membership. WiPM have produced a number of resources to help employers and support members which are available on the APM web site, and are involved with initiatives, including ‘Inspiring the future’ and STEMNET. Teri introduced our two main speakers, Dr Dorte-Rich Jørgensen, of Atkins, and Marta Garcia-Santamaria of Jaguar Landrover.
Dr Dorte-Rich Jørgensen is the Principle Sustainability Engineer at Atkins, Royal Academy of Engineering (RAE) visiting Professor in Innovation at Herriot Watt, and Director at RAE Centre of Excellence for sustainable building design. Dorte explained about her non-linear portfolio career path. She was inspired by her father and following an apprenticeship took a BSc in electrical engineering in Denmark, before getting a bank loan to fund a D-Phil at Oxford in control engineering. She explained that unlike in UK, even in the 1980’s women made up around 50% of technical courses at school and college. Her work career has included mechanical building services engineering, and environmental engineering. Currently she a portfolio of roles as a Chief Sustainability engineer, Visiting Professor at Herriot Watt and Director of RAE’s centre of excellence for sustainable building design.
Dorte explained the importance of networking, which led to the professorship opportunity. She was responsible for leading sustainability for the London Olympics with a team of 150 working collaboratively with the ODA and the design teams to ensure that London was the most sustainable games ever. Dorte shared her perspective on leadership as a woman of her generation, noting tGEO
Sila layari chcidshvcshgjfdfdxghjkjhgsdafxyagvxusagbxhsabxkjsaxbasjbxjasbxjksbaxkjbsakxbkjsabxkjasbxjksabxkjbasxkjbasxkjbsajbxdbcjrecjndskxnsfdvtfecwur idnowqjdmo djwgfiwe cgdc uchdshcuds sdbcsbcjsdbcjkdsbcjkbdbcdkjsbjbcjbdkjbskjcbkjnczxjncndsjcnjdscjdsun hfdn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn fgergfrgfvvvvvvvvvvvvvvvvvvvvhfjevfbhdfv re
Lightweight Vehicle Manufacturing
EU emission regulations has forced the automotive industry to adopt lightweighting strategies through material selection and design. There has been an industry focus on body in white lightweighting through the use of innovative materials, however, with manufacturing costs proving difficult to swallow, OEM's are exploring other options to reduce weight and meet CO2 emission requirements.
With this in mind, the Automotive Lightweight Interiors Congress has been engineered to explore the opportunities for lightweighting by adopting material and design strategies within the interior components. With emerging consumer trends such as infotainment, noise reduction, luxury textiles and electronic air conditioning, interior lightweighting strategies face the challenge of meeting customer expectations, safety standards whilst being financially viable.
KEY THEMES TO BE COVERED:
OEM STRATEGIES: How OEMs Are Balancing Costs, Carbon Emissions And Customer Expectations To Forge A Successful Interior Lightweighting Strategy
COST-DRIVEN SUPPLY CHAINS: Developing Partnership Strategies Between OEMs And Each Supplier Tier To Reduce Cost And Time For Lightweight Design Implementation
PLASTICS: Identifying Material And Moulding Innovations To Reduce The Weight And Cost Of Producing Lightweight Plastic Parts
LIGHTWEIGHT SEATING: Showcasing Cost Effective Lightweight Materials For Frames And Foams For Seating
LIGHTWEIGHTING OF ELECTRONIC PARTS: Assessing Design And Material Selection Strategies To Reduce Electronic Weight
NOISE REDUCTION VS LIGHTWEIGHTING: Determining Lightweight Designs And Materials That Can Be Applied For Noise Reduction Functions
Galma15 brochure
This document provides information about the Global Automotive Lightweight Materials Asia conference that will take place March 25-26, 2015 in Shanghai, China. The conference aims to help Asian automakers determine which lightweight materials and manufacturing techniques can be economically applied in automotive production based on cost, performance and availability. It will include presentations from over 20 global automakers on practical case studies and the latest developments in applying aluminum, high-strength steel, magnesium alloys, and carbon fiber composites to vehicles. Attendees will gain insights on material selection, joining methods, implementation costs, and how to transition facilities for large-scale production of lightweight vehicles.
CarE-Service Training on Metal Reforming by Fraunhofer
This document provides an agenda for a CarE-Service dissemination event being held on May 25th, 2021. The agenda includes an introduction to the Fraunhofer IWU institute, which will be presenting on reforming sheet metal parts, de-soldering structural parts, data management solutions, and smart mobile modules for testing. The event will conclude with a question and answer session. The overall presentation aims to disseminate the work being done in the CarE-Service project, which has received funding from the European Union to develop circular economy services for re-use and remanufacturing of hybrid and electric vehicle components.
Global Automotive Lightweight Vehicle Congress Asia
The Ford F150, the Mercedes-Benz C-Class, the BMW i3 and i8 Series - every year, the global automotive industry is pioneering new lightweight vehicles that were previously commercially unthinkable due to material and manufacturing technology cost restraints. Using ground breaking, multi-material joining and forming technology, commercially focused implementation strategies and cost effective high strength steel, aluminium, magnesium and composite supply channels, certain OEMs from the US, Europe and Asia are rapidly driving the industry forward into a fuel efficient, reduced-CO2 future.
Certain OEMs are moving mountains in regards to vehicle lightweighting. GALM Asia has been designed with one mission - to make sure these practical lessons are shared, transferred and applied across the industry to make sure every OEM in Asia can deliver low cost, CO2 emission-compliant vehicles on a global scale.
ASIA'S MOST PRACTICAL, APPLICATIONS-FOCUSED LIGHTWEIGHT CONFERENCE
The 2nd Annual Global Automotive Lightweight Vehicle Congress, Shanghai, has been designed specifically:
To help Asian OEMs practically determine which materials are functionally useable in lightweight fuel efficient vehicles
To help Asian OEMs practically determine the cost impact of applying new materials in the vehicle
To help Asian OEMs practically determine which new manufacturing techniques, processes, machinery and software are worth investing in
Minimize weight-maximize profit. Latest developments and solutions for existi...
Lightweight solutions for vehicles are a major trend in the global automotive industry. Virtually all OEMs are looking to minimize the weight of their vehicles for reasons of increased energy efficiency and cost efficiency, as well as global, regional and internal demands of climate change adaptation. The chassis is one of the most complex parts of any vehicle. Its construction and composition determines braking, steering, stabilization, suspension and wheel control. As chassis and frame are fundamental structural parts of any vehicle, weight reduction potential here is huge.
The challenge for the automotive industry is to design and produce cost-efficient, mass-production ready and sustainable lightweight vehicles while not compromising on safety demands. Profit margins for market leaders are huge.
This event aims at bringing together stakeholders, technical experts and researchers from all across the automotive sector to discuss the current use, developments and challenges of both existing and developing light weight technologies and solutions.
IQPC’s European launch event on “Automotive Lightweight Chassis and Frame Design” will bring together stakeholders from along the value chain to ensure maximum knowledge transfer and professional exchange.
• Get updated on latest practices, materials and (high-volume) production methods in lightweight chassis and frame design
• Learn how to minimize chassis and frame weight through latest technical and strategic developments
• Understand how to minimize costs and maximize environmental impact through innovations in materials, designing and joining
• Learn from OEM and Tier1-approaches in achieving vehicle weight reduction and maximum passenger safety
• Understand current developments and future outlooks in CAD and CAE methods and their impact on performance and cost efficiency
• Learn about supply chain modifications and adaptations in light of operating efficiency and cost saving potential
Visit our event here: http://bit.ly/lightweight_chassis_website
You can find more information here: http://bit.ly/agenda_conference
If you want to be part of the conference, you can register here: http://bit.ly/conference_register
Take A Breath 2008
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
Take A Breath 2004
The document summarizes the program for a conference on the challenges facing internal combustion engines in the next decade. The program includes a round table discussion on how diesel and gasoline engines may change through technologies like new injection architectures, particulate traps, variable valve actuation, and alternative fuels. Representatives from companies like Delphi, ENI, Fiat, FEV, Magneti Marelli, and Siemens will participate. The program also involves working groups, facility tours, and social activities.
More Related Content
Similar to Take A Breath 2012 - 3 Edition
SCR - Selective Catalytic Reduction
With the global drive to reduce the level of NOx and CO2 emissions from diesel engine exhausts, Selective Catalytic Reduction (SCR) systems with high conversion efficiency will be the key to providing cost effective solutions to the industry. The EU's upcoming regulations for the implementation of PEMS (Portable Emission Measurement Equipment) measurements in regard of Real Driving Emissions (RDE) will increase the requirements for the performance of SCR systems: Highest efficiency will be required under a wide range of operating conditions.
Moreover, the industry trend goes to an integration of different functions within the system. The combination of DPF and SCR coated catalyst reduces the weight of the whole system, but has caused several technical challenges that have not yet been fully solved.
The SCR-coated DPF has to stand tightened requirements of robustness and efficiency. Due to fuel saving measures, exhaust gas temperatures become lower, which highly affects the performance and requirements of the system.
- Exchange with international experts on how to incorporate SCR technology with all its various components in existing vehicle platforms
- Hear about the latest innovations in validation and testing and examine methods for sensors, catalysts and OBD functions with regard to DeNOx –technologies
- Discuss with leading specialists on how SCR system space can be optimized and sufficient exhaust system temperatures be achieved without compromising fuel consumption
- Develop strategies on how to best prepare your SCR development strategies for reducing real driving emissions
Discuss pressing topics with e.g. Michael Fischer, Section Leader Powertrain Technology at Honda R&D Europe, Bret Zimmerman, SCR Calibration Senior Engineer at Ford Motor Company or Dr. Thomas Garbe, Team Leader Fuels at Volkswagen AG...
http://bit.ly/SCR2014
World Automotive Conference 2019 - Brochure
Welcome to the 6th Annual World Automotive Conference in Istanbul!
We would like to thank you all for your growing interest and continued support for making the event what it is today. Special thanks to our international and local speakers for sharing their expertise. We hope you find today useful to your business, that you discuss mutual experiences and new knowledge, and meet with potential future business partners…
Daimler, Audi, and Volvo, at Advanced E-Motor - Advanced E-Motor Technology C...
Preview of the 7th E-Motor Conference 2019 Agenda, taking place at the Hotel Palace Berlin. Get the full Agenda here: http://bit.ly/E-Motor_Agenda_2019
JLR, Volvo Cars, Eaton Germany, CNH Industrial, Valeo | 8th International Con...
IQPC is due to organise the leading European conference on the topic of Advanced Downsizing & Turbocharging in Stuttgart between the 9-10 March 2016.
Don't miss this opportunity to hear expert presentations, take part in interactive workshops and meet with automotive downsizing and turbocharging experts from around the world. Download the agenda here: http://bit.ly/Agenda_Downsizing2016
7th Annual Advancements in Automotive Light-Weighting Summit
Taking place May 18-20 in Detroit IQPC is excited to share this all new and improved program. Continuing the trend we have developed over the years of bringing you the next generation automotive light-weighting developments; this 2015 summit will elevate your organizational efforts to achieve CAFÉ compliance and industry preeminence.
CON6393_S&M_BR_01_04_WEB
This document provides information about the "Simulation and Modelling 2016" knowledge transfer conference, which will take place on September 13-14, 2016 in Birmingham. The conference will discuss how simulations can replace physical testing and reduce costs in the automotive and aerospace industries. Day 1 will focus on automotive simulation and modelling, while Day 2 will discuss aerospace. The conference will address the latest developments in computer-aided engineering and how it is revolutionizing design, testing, and manufacturing. It will also cover challenges around integration, optimization, and validation of simulations. The agenda lists speakers from companies like Jaguar Land Rover, Rolls-Royce, and Boeing who will discuss their work in these areas.
Bos june 2017
This document outlines the program educational objectives, curriculum development process, career paths, program outcomes, technical skills, and subjects for an Automobile Engineering program. The objectives are to meet industry and research needs, encourage higher education, and promote entrepreneurship. The curriculum aims to develop sound technical and professional skills. Career paths include manufacturing, design, research, and government roles. Program outcomes include skills in problem solving, design, safety, and lifelong learning. Technical skills and correlating subjects are listed to enhance abilities in areas like repair, drafting, analytics, and alternative fuels. Suggested curriculum modifications are provided.
Volvo Cars, Hyundai Motor, GKN Driveline Confirm | Early Bird Discount Ends S...
The leading European conference on the topic of Advanced All Wheel Drive Systems is due to take place in Frankfurt between the 22-23 June 2015. Don't miss your chance to hear expert presentations, take part in interactive workshops and meet with AWD experts from around the world.
There are limited places available, so make sure you secure your conference ticket today! Learn more here.
Some of the companies that have confirmed their participation are:
• Volvo Car Group • Hyundai Motor • National Electric Vehicle Sweden AB • GKN Driveline • BorgWarner TorqTransfer Systems • AAM Europe GmbH • Punch Powertrain N.V. • LG Chem Ltd • Nissan Motor Manufacturing • Renault • Valeo Equipements Electriques Moteur • ZF Friedrichshafen • NIRA Dynamics • Controlled Power Technologies • Sonceboz Automotive
Visit the website at: http://bit.ly/AWD_SP_Website
Download the agenda here: http://bit.ly/AWD_SP_Agenda
Workshop Hannover ANFIA-ANIE 2010
Sustainable mobility: the Italian technological challenge - An innovative paradigm for a new vehicles' generation - Hannover (Germany), 19 april 2010
Automotive NVH (in co-operation with Bentley Motors Limited)
VISIT THE CONFERENCE WEBSITE HERE - http://bit.ly/NVH_Slideshare_Website
With contributions from 10 international OEM companies!
The advent of electrical, electronic and mechatronic fields have demonstrated the potential of not just reducing noise and vibration in vehicle using active technologies, but has also generated the scope of introducing sounds and vibrations that could drive positive emotional response. This is a major requirement for high performance cars and is also growing its importance in the field of mass-produced vehicles.
This conference will seek to explore the latest challenges in this area and unique solutions that industry leaders are employing to move things forward.
We hope that you can join us in Crewe, the home of Bentley Motors Limited and help us make this event successful and regular in the automotive NVH calendar.
• Explore advanced passive and active NVH control-solutions, to save weight and
costs while optimising CO2 efficiency and passenger comfort
• Gain insight into advanced measuring, testing and simulation tools in a
virtual reality context for definition and development of integrated solutions that
meet passengers´perception and needs
• Explore psychoacoustics, sound branding and personalised acoustic options to
differentiate from competitors and ensure a unique acoustic driving experience
• Hear about advanced technologies and sound synthesis for Noise Optimisation
in EV/HEVs and high performance cars
• Find out about powertrain and vehicle refinement with smart materials and
innovative measuring systems that ensure low cost
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]Israel Export Institute - מכון היצוא הישראלי
This document provides an overview of a leading global automotive supplier with €20.7 billion in total sales. It has 103,000 employees working across 330 sites in 34 countries. The company has a strong presence in North America, Asia, and Europe with over 6,000 engineers working in R&D. It is a leader in automotive seating, interior systems, and emissions control technologies.CON6420_ATPD_16_BR_01_08_WEB
This document summarizes an automotive technicians' professional development forum that will take place from October 20-21, 2016 in Coventry, UK. The forum will provide opportunities for technicians to advance their technical skills and career progression through industry presentations, site visits, workshops, and networking. Key speakers will discuss topics like career paths, changing skill requirements, and future challenges in automotive engineering. The event aims to help technicians gain expertise, expand their industry knowledge, and develop professional networks.
pune auto expo 2017
The document provides information about Auto Expo 2017, an upcoming automotive exhibition in Pune, India. The expo aims to showcase latest automotive products, technology, research, and achievements. It will include conferences on automotive topics, a student pavilion displaying vehicle designs, and factory visits. Market leaders in various automotive segments like Maruti Suzuki, Tata Motors, and Bajaj Auto will exhibit. Technical conferences on safety, green vehicles, and other topics are planned with international and national speakers. The expo aims to be an interaction platform for industry and academia to bridge skill gaps in the workforce.
Practitioners and the profession: a changing landscape, 8th September 2015
Practitioners and the profession: a changing landscape, 8th September 2015Association for Project Management
The APM South Wales & West of England (SWWE) branch was approached by Babcock International who wished to sponsor an event to promote diversity in the workplace, a subject they take very seriously. SWWE and the Women in Project Management (WiPM) SIG, worked together with Babcock staff to organise this event.
Gavin Leckie, Submarines Programme and Operations Director, supported by Sarah Beck and Lisa Radford, explained why Babcock take diversity so seriously. Babcock anticipates a skills shortage and difficulty in attracting sufficient skilled and qualified staff to meet future demand. They have too many white, middle-aged males, and recognise that they need to attract and retain skills from across the spectrum of the whole population and aim to get a better balance between male and female staff. Sponsoring this event shows how seriously Babcock takes the issue to the profession and their own staff.
Teri Okoro, the WiPM SiG Chair, explained about the work of the WiPM SIG in promoting the role of women in the profession to increase the current 17% representation. This is however much better in the younger membership. WiPM have produced a number of resources to help employers and support members which are available on the APM web site, and are involved with initiatives, including ‘Inspiring the future’ and STEMNET. Teri introduced our two main speakers, Dr Dorte-Rich Jørgensen, of Atkins, and Marta Garcia-Santamaria of Jaguar Landrover.
Dr Dorte-Rich Jørgensen is the Principle Sustainability Engineer at Atkins, Royal Academy of Engineering (RAE) visiting Professor in Innovation at Herriot Watt, and Director at RAE Centre of Excellence for sustainable building design. Dorte explained about her non-linear portfolio career path. She was inspired by her father and following an apprenticeship took a BSc in electrical engineering in Denmark, before getting a bank loan to fund a D-Phil at Oxford in control engineering. She explained that unlike in UK, even in the 1980’s women made up around 50% of technical courses at school and college. Her work career has included mechanical building services engineering, and environmental engineering. Currently she a portfolio of roles as a Chief Sustainability engineer, Visiting Professor at Herriot Watt and Director of RAE’s centre of excellence for sustainable building design.
Dorte explained the importance of networking, which led to the professorship opportunity. She was responsible for leading sustainability for the London Olympics with a team of 150 working collaboratively with the ODA and the design teams to ensure that London was the most sustainable games ever. Dorte shared her perspective on leadership as a woman of her generation, noting tGEO
Sila layari chcidshvcshgjfdfdxghjkjhgsdafxyagvxusagbxhsabxkjsaxbasjbxjasbxjksbaxkjbsakxbkjsabxkjasbxjksabxkjbasxkjbasxkjbsajbxdbcjrecjndskxnsfdvtfecwur idnowqjdmo djwgfiwe cgdc uchdshcuds sdbcsbcjsdbcjkdsbcjkbdbcdkjsbjbcjbdkjbskjcbkjnczxjncndsjcnjdscjdsun hfdn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn fgergfrgfvvvvvvvvvvvvvvvvvvvvhfjevfbhdfv re
Lightweight Vehicle Manufacturing
EU emission regulations has forced the automotive industry to adopt lightweighting strategies through material selection and design. There has been an industry focus on body in white lightweighting through the use of innovative materials, however, with manufacturing costs proving difficult to swallow, OEM's are exploring other options to reduce weight and meet CO2 emission requirements.
With this in mind, the Automotive Lightweight Interiors Congress has been engineered to explore the opportunities for lightweighting by adopting material and design strategies within the interior components. With emerging consumer trends such as infotainment, noise reduction, luxury textiles and electronic air conditioning, interior lightweighting strategies face the challenge of meeting customer expectations, safety standards whilst being financially viable.
KEY THEMES TO BE COVERED:
OEM STRATEGIES: How OEMs Are Balancing Costs, Carbon Emissions And Customer Expectations To Forge A Successful Interior Lightweighting Strategy
COST-DRIVEN SUPPLY CHAINS: Developing Partnership Strategies Between OEMs And Each Supplier Tier To Reduce Cost And Time For Lightweight Design Implementation
PLASTICS: Identifying Material And Moulding Innovations To Reduce The Weight And Cost Of Producing Lightweight Plastic Parts
LIGHTWEIGHT SEATING: Showcasing Cost Effective Lightweight Materials For Frames And Foams For Seating
LIGHTWEIGHTING OF ELECTRONIC PARTS: Assessing Design And Material Selection Strategies To Reduce Electronic Weight
NOISE REDUCTION VS LIGHTWEIGHTING: Determining Lightweight Designs And Materials That Can Be Applied For Noise Reduction Functions
Galma15 brochure
This document provides information about the Global Automotive Lightweight Materials Asia conference that will take place March 25-26, 2015 in Shanghai, China. The conference aims to help Asian automakers determine which lightweight materials and manufacturing techniques can be economically applied in automotive production based on cost, performance and availability. It will include presentations from over 20 global automakers on practical case studies and the latest developments in applying aluminum, high-strength steel, magnesium alloys, and carbon fiber composites to vehicles. Attendees will gain insights on material selection, joining methods, implementation costs, and how to transition facilities for large-scale production of lightweight vehicles.
CarE-Service Training on Metal Reforming by Fraunhofer
This document provides an agenda for a CarE-Service dissemination event being held on May 25th, 2021. The agenda includes an introduction to the Fraunhofer IWU institute, which will be presenting on reforming sheet metal parts, de-soldering structural parts, data management solutions, and smart mobile modules for testing. The event will conclude with a question and answer session. The overall presentation aims to disseminate the work being done in the CarE-Service project, which has received funding from the European Union to develop circular economy services for re-use and remanufacturing of hybrid and electric vehicle components.
Global Automotive Lightweight Vehicle Congress Asia
The Ford F150, the Mercedes-Benz C-Class, the BMW i3 and i8 Series - every year, the global automotive industry is pioneering new lightweight vehicles that were previously commercially unthinkable due to material and manufacturing technology cost restraints. Using ground breaking, multi-material joining and forming technology, commercially focused implementation strategies and cost effective high strength steel, aluminium, magnesium and composite supply channels, certain OEMs from the US, Europe and Asia are rapidly driving the industry forward into a fuel efficient, reduced-CO2 future.
Certain OEMs are moving mountains in regards to vehicle lightweighting. GALM Asia has been designed with one mission - to make sure these practical lessons are shared, transferred and applied across the industry to make sure every OEM in Asia can deliver low cost, CO2 emission-compliant vehicles on a global scale.
ASIA'S MOST PRACTICAL, APPLICATIONS-FOCUSED LIGHTWEIGHT CONFERENCE
The 2nd Annual Global Automotive Lightweight Vehicle Congress, Shanghai, has been designed specifically:
To help Asian OEMs practically determine which materials are functionally useable in lightweight fuel efficient vehicles
To help Asian OEMs practically determine the cost impact of applying new materials in the vehicle
To help Asian OEMs practically determine which new manufacturing techniques, processes, machinery and software are worth investing in
Minimize weight-maximize profit. Latest developments and solutions for existi...
Lightweight solutions for vehicles are a major trend in the global automotive industry. Virtually all OEMs are looking to minimize the weight of their vehicles for reasons of increased energy efficiency and cost efficiency, as well as global, regional and internal demands of climate change adaptation. The chassis is one of the most complex parts of any vehicle. Its construction and composition determines braking, steering, stabilization, suspension and wheel control. As chassis and frame are fundamental structural parts of any vehicle, weight reduction potential here is huge.
The challenge for the automotive industry is to design and produce cost-efficient, mass-production ready and sustainable lightweight vehicles while not compromising on safety demands. Profit margins for market leaders are huge.
This event aims at bringing together stakeholders, technical experts and researchers from all across the automotive sector to discuss the current use, developments and challenges of both existing and developing light weight technologies and solutions.
IQPC’s European launch event on “Automotive Lightweight Chassis and Frame Design” will bring together stakeholders from along the value chain to ensure maximum knowledge transfer and professional exchange.
• Get updated on latest practices, materials and (high-volume) production methods in lightweight chassis and frame design
• Learn how to minimize chassis and frame weight through latest technical and strategic developments
• Understand how to minimize costs and maximize environmental impact through innovations in materials, designing and joining
• Learn from OEM and Tier1-approaches in achieving vehicle weight reduction and maximum passenger safety
• Understand current developments and future outlooks in CAD and CAE methods and their impact on performance and cost efficiency
• Learn about supply chain modifications and adaptations in light of operating efficiency and cost saving potential
Visit our event here: http://bit.ly/lightweight_chassis_website
You can find more information here: http://bit.ly/agenda_conference
If you want to be part of the conference, you can register here: http://bit.ly/conference_register
Similar to Take A Breath 2012 - 3 Edition (20)
Daimler, Audi, and Volvo, at Advanced E-Motor - Advanced E-Motor Technology C...
Daimler, Audi, and Volvo, at Advanced E-Motor - Advanced E-Motor Technology C...
JLR, Volvo Cars, Eaton Germany, CNH Industrial, Valeo | 8th International Con...
JLR, Volvo Cars, Eaton Germany, CNH Industrial, Valeo | 8th International Con...
7th Annual Advancements in Automotive Light-Weighting Summit
7th Annual Advancements in Automotive Light-Weighting Summit
Volvo Cars, Hyundai Motor, GKN Driveline Confirm | Early Bird Discount Ends S...
Volvo Cars, Hyundai Motor, GKN Driveline Confirm | Early Bird Discount Ends S...
Automotive NVH (in co-operation with Bentley Motors Limited)
Automotive NVH (in co-operation with Bentley Motors Limited)
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]
Faurecia Group Presentation July 2016_VA 4 3 FINAL[4982]
Practitioners and the profession: a changing landscape, 8th September 2015
Practitioners and the profession: a changing landscape, 8th September 2015
CarE-Service Training on Metal Reforming by Fraunhofer
CarE-Service Training on Metal Reforming by Fraunhofer
Global Automotive Lightweight Vehicle Congress Asia
Global Automotive Lightweight Vehicle Congress Asia
Minimize weight-maximize profit. Latest developments and solutions for existi...
Minimize weight-maximize profit. Latest developments and solutions for existi...
More from Loccioni Group
Take A Breath 2008
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
Take A Breath 2004
The document summarizes the program for a conference on the challenges facing internal combustion engines in the next decade. The program includes a round table discussion on how diesel and gasoline engines may change through technologies like new injection architectures, particulate traps, variable valve actuation, and alternative fuels. Representatives from companies like Delphi, ENI, Fiat, FEV, Magneti Marelli, and Siemens will participate. The program also involves working groups, facility tours, and social activities.
APOTECAcommunity paper project review (Feb 2015)
The document outlines the process and methodology for developing recommendations on automation standards in hospital pharmacy practice from a community of APOTECAchemo users. It involved two surveys of the community, an in-person two-day meeting divided into groups to discuss specific topics, refinement of the recommendations based on survey and meeting feedback, and plans to submit the finalized recommendations for publication. The goal is to share knowledge and experiences with the broader pharmacy community.
Fev @ Take A Breath 2012
Fev at the third edition of Take A Breath, workshop organized by Loccioni Group, to discuss the potential of innovation in the automotive industry.
On 28th and 29th June 2012, 50 companies of 12 countries - including automobile manufacturers (OEMs), automotive component manufacturers (Tier 1) and the international scientific community - met in Italy in Marche region, to discuss the future of the motor.The international speakers parterre - from Volksvagen to Daimler, from General Motors to Ferrari, with Denso, Magneti Marelli, Continental, Delphi, Bosch, IAV, Cummins, Fev, Ricardo with the Polytechnic of Turin and Chalmers University - has drawn the technical, economic and scientific scenario of the sector as well as the current international strategies.
Ricardo @ Take A Breath 2012
The document discusses key drivers for gasoline engine development through 2025 including legislation requiring reduced emissions and improved fuel economy. It outlines technologies like downsizing, downspeeding, advanced combustion systems, and hybridization that can help meet these goals. Looking ahead, it predicts gasoline will remain the dominant fuel globally with diesel share declining in Europe as hybrid and gasoline technologies advance.
Progetto Roots Energy
Progetto presentato dai ragazzi del Corso di comportamento Manageriale (Prof. Federico Niccolini, Facoltà di Economia, Università di Macerata) in occasione del laboratorio di studio in collaborazione con il Gruppo Loccioni. Obiettivo: immaginare i nuovi scenari di progetto in ambito di sostenibilità a cui il Gruppo Loccioni potrà dedicare energia e sviluppo di innovazione nei prossimi anni.
Progetto Spring
Progetto presentato dai ragazzi del Corso di comportamento Manageriale (Prof. Federico Niccolini, Facoltà di Economia, Università di Macerata) in occasione del laboratorio di studio in collaborazione con il Gruppo Loccioni. Obiettivo: immaginare i nuovi scenari di progetto in ambito di sostenibilità a cui il Gruppo Loccioni potrà dedicare energia e sviluppo di innovazione nei prossimi anni.
Progetto Be Bee
Progetto presentato dai ragazzi del Corso di comportamento Manageriale (Prof. Federico Niccolini, Facoltà di Economia, Università di Macerata) in occasione del laboratorio di studio in collaborazione con il Gruppo Loccioni. Obiettivo: immaginare i nuovi scenari di progetto in ambito di sostenibilità a cui il Gruppo Loccioni potrà dedicare energia e sviluppo di innovazione nei prossimi anni.
Leaf Community Vancouver 2010
The LEAF House is a net zero building composed of six apartments that produces as much energy annually from renewable sources as it consumes. Monitoring of the house found that it reduced energy and water consumption by 50% and 69% respectively compared to a standard building, while maintaining comfort for residents. The LEAF House integrates sustainability and energy efficiency solutions like solar power, geothermal heating, and real-time consumption monitoring. It is part of the larger LEAF Community, the first sustainable community in Italy, which aims to demonstrate renewable energy and sustainable living.
More from Loccioni Group (12)
Recently uploaded
美洲杯买球-美洲杯买球在哪里押注-美洲杯买球在哪里投注|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】美洲杯买球是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。美洲杯买球平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，美洲杯买球对业界的影响力可见一斑。
一比一原版(ucb毕业证书)白金汉大学毕业证如何办理
可看样本【微信号:BYZS866】《(ucb毕业证书)白金汉大学毕业证》【微信号:BYZS866】《毕业证、成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【关于学历材料质量】
我们承诺采用的是学校原版纸张（原版纸质、底色、纹路）我们工厂拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有成品以及工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版皇家墨尔本理工大学毕业证(RMIT毕业证书)学历如何办理
学校原版办理【微信号:176555708】【学校原版办理(RMIT毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版南昆士兰大学毕业证(USQ毕业证书)学历如何办理
不能毕业办理【微信号:176555708】【不能毕业办理(USQ毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯足彩-滚球欧洲杯足彩-欧洲杯足彩滚球平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯足彩是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。欧洲杯足彩平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，欧洲杯足彩对业界的影响力可见一斑。
Kalyan chart DP boss guessing matka results
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
The last lesson in comic form for English art integrated project class 12
English art integrated project class 12 for Ch 1 The Last lesson
定制(london学位证书)英国伦敦大学毕业证本科学历原版一模一样
原版定制【微信:bwp0011】《(london学位证书)英国伦敦大学毕业证本科学历》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
一比一原版科廷大学毕业证(Curtin毕业证书)学历如何办理
退学办理【微信号:176555708】【退学办理(Curtin毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯下注-欧洲杯下注下注app-欧洲杯下注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
欧洲杯竞猜-欧洲杯竞猜外围竞猜-欧洲杯竞猜竞猜平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯竞猜是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯竞猜是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯竞猜，旗下2800家投注站遍布全英国。
按照学校原版(UTS文凭证书)悉尼科技大学毕业证快速办理
了解办理留学学历【微信:176555708】【(UTS毕业证书)悉尼科技大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
car rentals in nassau bahamas | atv rental nassau bahamas
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Automotive Engine Valve Manufacturing Plant Project Report.pptx
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】世预赛下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。世预赛下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，世预赛下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
体育博彩-体育博彩赔率-体育博彩冠军赔率|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】体育博彩在体育博彩方面，不难发现，体育博彩多为英式运动提供投注。体育博彩为丰富多彩的体育项目提供投注，如足球、赛马、板球和飞镖，但这不是体育博彩的唯一优势。在体育博彩，全世界玩家都可以找到自己感兴趣的比赛进行投注。体育博彩为网球和美式运动如棒球、美式足球、篮球、冰球开出的投注同样值得关注。在夏季或冬季奥运会方面，体育博彩为玩家开出了丰富多彩的服务，是你的不二之选。你还可以投注水球、自行车和班迪球等小众体育项目，甚至可以为武术、拳击和综合格斗投注。体育博彩为众多体育项目开出滚球投注。
原版定做(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭原版一模一样
原版定制【微信:bwp0011】《(mmu学位证书)英国曼彻斯特城市大学毕业证本科文凭》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Recently uploaded (20)
hays salary report for 2024: check out your salaries here
hays salary report for 2024: check out your salaries here
The last lesson in comic form for English art integrated project class 12
The last lesson in comic form for English art integrated project class 12
car rentals in nassau bahamas | atv rental nassau bahamas
car rentals in nassau bahamas | atv rental nassau bahamas
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Automotive Engine Valve Manufacturing Plant Project Report.pptx
Annual report on mahindra and mahindra on supply chain analysisdf
Annual report on mahindra and mahindra on supply chain analysisdf
Take A Breath 2012 - 3 Edition
- 1. TAKEA BREATHA look into the future of the Automotive Industry 3 28th | 29th June 2012 Loccioni Headquarter Angeli di Rosora, Ancona, Italy
- 2. mobility.loccioni.com TAKEA BREATH3 Workshop on the development of internal combustion engines and powertrain systems in the next decade rd3
- 3. 12.30 am ARRIVAL AND LIGHT LUNCH 02.00 pm WELCOME TO LOCCIONI 02.20 pm INTRODUCTION KEYNOTE OF THE CHAIRMAN RINALDO RINOLFI Fiat | Former VP Fiat Powertrain Research & Technology 02.45 pm THE GASOLINE ENGINES EVOLUTION AT 2020 KEN PENDLEBURY Ricardo | Gasoline Engines Director 03.15 pm– ROUND TABLE ON GDI ENGINES AND POWERTRAIN SYSTEMS PETTER DAHLANDER - Chairman Chalmers University | Associate Professor Applied Mechanics FABIO BEDOGNI Ferrari | Engine Performance and Emission Manager MICHELE CALÒ Bosch | Section Manager in Sales Customer Team Fiat Group ANAND GANDHI GDI Technical Expert THORSTEN HERGEMÖLLER Daimler | Research & Advanced Engineering Pwt - Injection Systems Manager GUY HOFFMANN Delphi | GDI Fuel Systems - Product Engineering Manager HOLGER OEST Continental Automotive | GDI Injectors - Director R&D RITA DI GIOIA Magneti Marelli | ICE Research & Emerging Technology Program Manager IAN WILLIAMS Denso | EMS Senior Engineering Manager ->Coffee break between 04.00 pm and 04.15 pm 05.30 pm WRAP UP PETTER DAHLANDER Chalmers University | Associate Professor Applied Mechanics 08.30 pm DINNER EXPERIENCE June 28th ->THURSDAY
- 4. 08.45 am WELCOME COFFEE 09.00 am VOLKSWAGEN’S NEW MODULAR TDI GENERATION ANDREAS KRAUSE Volkswagen AG | Head of Diesel Injection Development 09.20 am THE DIESEL ENGINES EVOLUTION AT 2020 THOMAS KÖRFER Fev | VP Business Unit Passenger Car Diesel Engines 09.50 am ROUND TABLE ON DIESEL ENGINES AND POWERTRAIN SYSTEMS GIOVANNI CIPOLLA - Chairman Turin Polytechnic | Energetics Dpt - Host Professor JOHN AWAD – Cummins | Chief Engineer Powertrain Systems NICOLA PINI IAV|ProjectManagerforEnergyManagementDpt-DevelopmentAdvancedDA FRANZ PAUL GULDE – Daimler | Advanced Engineering - Car Diesel Engine Manager MAX NAKAGAWA Denso Automotive Deutschland Gmbh | Managing Director MICHAEL POTTER – General Motors Powertrain | Diesel Engines - Chief Engineer ANDREAS RETTICH Bosch | CR Injector Development - Project Director MARIO RICCO Puglia Region | VP Technology Mechatronic District -> Coffee break between 10.45 am and 11.00 am 12.00 am WRAP UP GIOVANNI CIPOLLA Turin Polytechnic | Energetics Dpt - Host Professor 12.30 am CONCLUSION AND FUTURE SCENARIOS RINALDO RINOLFI Fiat | Former VP Fiat Powertrain Research & Technology 01.00 pm LUNCH EXPERIENCE 02.00 pm LOCCIONI FACILITY AND LABS TOUR ® June 29th ->FRIDAY
- 5. ->to contact us FABRIANO MACERATA FERMO PESCARA / TARANTO ASCOLI PICENO FALCONARA M. A14 exit Ancona Nord SS76 exit n°12 Maiolati Spontini/ Castelplanio R. Sanzio Airport by plane Ancona Falconara Marittima ‘‘R.Sanzio’’ Airport by car from Bologna or Pescara: Highway A14 exit Ancona nord; Highway SS76 direction Roma, exit n°12 Maiolati Spontini/Castelplanio. from Roma: Highway SS76 direction Ancona, exit n°12 Maiolati Spontini/Castelplanio. by train from Milano: direction Taranto, Ancona railway station, then direction Roma, Jesi railway station. from Roma: direction Ancona, Jesi railway station. PESARO <-FIRENZE - < < BOLOGNA <-ROMA JESI A14 SS76 A14 LOCCIONI ANCONA ->Contact us to book your accomodation info and registrations: LUCA LAZZARI phone +39 0731 816281 l.lazzari@loccioni.com press SONIA CUCCHI phone +39 0731 816317 s.cucchi@loccioni.com Loccioni Group via Fiume 16 60030 Angeli di Rosora Ancona, Italy www.loccioni.com How ->to reach us
- 6. TAKEA BREATH3 Loccioni Group via Fiume 16 60030 Angeli di Rosora Ancona, Italy www.loccioni.com