Michael John Foreman has over 30 years of experience in piping design, project coordination, and QA/QC checking for industrial projects. He has expertise in piping design for petrochemical, refinery, oil and gas processes. Some of his responsibilities include piping design, project management, cost estimating, engineering changes, and process safety. He is proficient in various piping design software like CADWorx, PDMS, Navisworks, and SmartPlant 3D.

1. Page | 1 of 6
Michael John Foreman
Sr. Project Coordinator/Piping Designer/Checker/Supervisor
515 Whitecap Dr.
El Lago, TEXAS 77586 US
Phone:
Cell: (713) 876-7727
mike4man@outlook.com
EXECUTIVE SUMMARY
I have a Technical/Mechanical background with emphasis in Piping Design, Project Coordinator, and QA/QC
(checking). I work in the Industrial Engineering & design industry and my duties included working with
Plant/Industrial personnelto meet and maintain the requirements of their expectations along with following the
given scope of work to have the project finished in a timely and efficient manner. I have experience with the
following Design specialties, and aided in management of Pipe & Process Design aspects of as large as $125M
Projects and numerous small $10M Projects. I bring to a new opportunity 30+ years of heavy design experience and
management/supervision skills tailored to the Industrial Petrochemical/Olefin/Oil & Gas industry while
incorporating use of the most popular and current software titles.
• ASME/ANSI pipe, fittings and valves
• Modular Piping
• Up-Stream Design
• Mid-Stream Design & Storage Design
• Down-Stream (Facility) Design
• LNG & NGL
• Detailed Design
• Skid Units & Skid Piping Design
• Mechanical Design & Checking
• Piping Isometric Drawings
• Piping & Instrumentation Diagrams
• Piping Flexibility
• Olefins Process
• Petrochem/Refinery/Oil & Gas Process
• Cryogenic Piping and Support Design
• Man-hour estimates, Man loading, Proposals
• Engineering Change Orders & Request
• Field Engineering, Field Walk downs
• Containment systems
• Firewater systemdesign
• Refrigerant Units
• Water treatment systems
• Management of change (MOC's)
• Hazop and Process Safety Management

Sr. Project Coordinator / Piping Design Checker/ Piping Designer 3D
Strategy Engineering (Contract)
June, 2014 — February, 2016 (1 year 8 months)
Software: Cadworx/PDMS/Navisworks/SmartPlant 3D/Bentley/Autodesk Plant 3D
 Coordinated Upstream & Midstream Projects & personnel to stream-line operations with current industry standards.
 QA/QC checked complete construction/fabrication/skid packages pertaining to all piping/mechanical facets of the project
 Regions of Gulf of Mexico, Eagle Ford, Permian Basin, Barnett, Appalachian Basin, etc...
 Complete Upstream & Midstream facilities
 Cryogenic & LNG/NGL Facilities
 Offshore Platforms (all related aspects), treatment, scrubbing, separation
 Manifold design,Flow Lines, Ultra High Pressures,Skid designs,ship/boat loading & unloading
 Launching & Receiving (Pig/Scrubber) product diversion and automation

2. 
Page | 2 of 6
Sr. Piping Designer 3D / Checker / Project Coordinator
Audubon Engineering (Contract)
June, 2013 — June, 2014 (1 year)
Software: Cadworx//SmartPlant 3D/Navisworks/SmartPlant 3D/Bentley/Autodesk Plant 3D
 FEED & detailed design & checking of many on-going Oil & Gas Projects located in the Eagle Ford Shale
 Onsite P&ID Check for facilities located in the Eagle Ford Shale region
 Constructing of Template models using Cadworx
 QA/QC (Checking) of all piping & mechanical facets & P&ID’s of assigned projects
 Coordinating work with clients schedules
 3D design of Rack, Skid, Equipment & Inter-connecting piping
 Location and setting equipment
 Underground piping and locating existing underground pipe
 Maintaining deliverables, oversee drawing production of designers & engineers
Sr. Piping Designer 3D / Project Lead / Project Coordinator
Universal Pegasus International (Direct)
August,2012 — May, 2013 (10 months)
Software: Cadworx/PDMS/SmartPlant 3D/Navisworks/Bentley/Autodesk Plant 3D
 Lead Pipe Designer with Oil & Gas Projects located in the Eagle Ford Shale & Permian Basin
 Greenfield design of several Oil & Gas facilities
 FEED & Detailed Design
 Completed packages for fabrication construction of facilities to enhance output capabilities
 Upstream separation of Oil & Gas, sour crude treating & stripping gases
 Automation and metering of liquids and gasses
 Water extraction, storage and treatment
Sr. Piping Designer 3D / Project Lead / Coordinator
L-Con Engineering & Constructors (Direct)
March, 2011 — August,2012 (1 year 5 months)
Software: Cadworx/Bentley/SmartPlant 3D/AutodeskPlant 3D/ Navisworks
 Oil and Condensate gathering, manifold design, pumping, metering, tank storage,Bulk & Dockside loading
 LNG & NGL Spheres and all associated piping.
 Began the design the new 1.6 million barrel tank storage facility and dock loading directly connected to the Gulf of Mexico
 In-charge of all man-hours, staff, deliverables and design of this project
 Ship/Barge loading, Vapor Recovery, Maritime.
 Water Treatment/Collection & truck loading.

3. 
Page | 3 of 6
Sr. Project Coordinator / Piping Designer / Checker
Burns & McDonnell in St. Louis MO. (Temporary Contract)
May, 2010 — January, 2011 (8 months)
Software: Cadworx/PDS/Navisworks/Bentley
 3D Model creation using existing 2D pipe rack drawings and field survey for Conoco-Phillips Wood River Illinois facility
 Model produced with Cadworx & terminated at existing equipment/vessels previously modeled in PDS
 Survey & elevations of rack & equipment
 Structural integrity/feasibility studies
 Routing of several new lines in rack with challenging obstacles
 Squad checking all aspects ofcomplete deliverables package
Sr. Piping Designer / Checker
Ref-Chem Pasadena TX. (Contract)
October, 2009 — February, 2010 (4 months)
Software: PDS/SmartPlant Review/Flexcad
 Checked all piping, structural members and foundations related to this LNG/Gas project
 Establish new battery limit
 Set new equipment and moved/revamp existing equipment
 Routed piping to/from new equipment using existing & new pipe racks with the addition of miscellaneous new supports
 Designed to reduce field welding
 Establish new battery limit
Sr. Lead Piping Designer / Checker
Technip (Contract)
February, 2009 — October, 2009 (8 months)
Software: PDS/PDMS/AutoCAD/SmartPlant Review/Flexcad
Projects: Exxon Mobil Flare Gas Control Project: (Downstream) Beaumont Texas
Shell Na Kika: (Offshore Semi-Sub.) Gulf of Mexico, 140 miles southeast ofNew Orleans
BP ThunderHorse: (Offshore Semi-Sub) Gulf of Mexico, 150 miles southeast ofNew Orleans
Marine Energy Swordfish & Neptune Spar (Offshore Platform)
 Involved with design of modular piping
 Software used AutoCAD, and PDMS
 Replaced and upgraded all Flare Gas Headers throughout the refinery at Exxon Mobile Beaumont
 Duties include, field survey,gathering information to replace several thousand feet of large bore pipe
 Software used, AutoCAD, Microstation, SmartPlant, PDS, and LFM
 The use of laser maps to aid in the routing pipe

4. 
Page | 4 of 6
Sr. Piping Designer 3D / Checker
Shaw/Stone & Webster (Contract)
September, 2008 — February, 2009 (5 months)
Software: PDS/SmartPlant Review/FlexCad
 Yansab/Yanbu, Saudi Arabia Project – Grassroots project completed using PDS metric
 Checked the Isometric Drawings generated using SmartPlant Review to turnout accurate fabrication drawings
 Checked both pipe and steel until Mechanical Completion.
Sr. Piping Designer 3D / Checker
Shaw/Stone & Webster Port Arthur TX. (Contract)
August,2006 — December, 2007 (1 year 5 months)
Software: PDS/Flexcad/SmartPlant Review
 Huntsman Burnout Rebuild: Field verification of cold pipe supports,related piping, field change requests for work that wasn't in
the original scope of work.
 Unit damage was a result of a large scale fire in excess of $50M
 Updated several models and checked extracted Isometrics previously done by Stone & Webster
 Updated existing piping drawings to reflect present work.
Sr. Piping Designer 3D / Lead / Checker
CDI Engineering, Orange Texas (Direct)
January, 2008 — August,2008 (8 months)
Software: PDMS/ PlantSpace Software with Microstation V8
 Re-designed and redrew P&IDs to industry standards to remove years of drawing congestion
 Redraw 2 primary units at a total of 100+ P&IDs each
 The project was terminated for budgetary reasons to later be completed by others
Sr. Piping Designer / Checker / Project Lead
CDI Engineering, Beaumont TX. (Direct)
May, 2005 — August,2006 (1 year 3 months)
Software: PDS/PDMS/Cadworx/Bentley
 Involved in several small projects in-house including pipe design using FlexCad (in-office)
 PDMS & PDS certification training
 Maintenance work, management of change, equipment changes/upgrades,hydraulics,stress isometrics etc.
Goodyear Chemical Inc. (In-Plant) AutoCAD & ProCad
 Assigned to do all maintenance and aid in several capital projects with-in the Goodyear Beaumont facility
 P&IDs, piping plans, elevations, and field notes were used to create accurate fabrication isometric drawings
 Updated existing P&IDs, moved manual drawings to CAD, and designed standard structuralsupports
Sumotomo Rubber, Freeport Texas, PDMS/Flexcad used to make changes and add a new unit to increase efficiency in the isobutyl
unit.

5. 
Page | 5 of 6
Sr. Piping Designer
Levingston Engineering Sulphur LA. (Direct)
July, 2004 — April, 2005 (10 months) CITGO Refinery (In-Plant)
Software: AutoCAD/CadPipe/Flexcad
 Developed Engineering / Design package consisting of P&IDs, key plans, piping plans and isometrics
 Software used, AutoCAD, FlexCad, and an in-house developed program that was 3rd party to AutoCAD.
Sr. Staff Piping Designer 3D / Checker
RCR Engineering Dayton TX (Contract to Direct)
August,2003 — June, 2004 (11 months)
Software: AutoCAD/Flexcad/Cadworx
 Sr. Piping Designer for a facility in Phoenix Arizona
 Fire protection piping, tubing involving orbital welding for joint-less connections
 Provided the weld count and BOM for the stainless surgical steel tubing
 Staff Piping Designer/Checker/Department Lead, for several small projects located in the LaPorte/Baytown/Deer
Park/Pasadena/Mont Belvieu area
 Setting of 4 large spheres (NGL) and piping to and from them including over 1 mile of rack piping in the Enterprise Products
Facility.
Sr. Pipe Designer /Cad / Field Lead
Recon Engineering Lake Charles LA. (Direct)
October, 1995 — February, 2000 (4 years 4 months)
Software: AutoCAD/Flexcad/Cadworx
 Designed and checked several projects necessary for the completion of the 3 Citgo Petroleum Cat Cracker Upgrades
 Responsible for checking and running the drawings thru CAD-QC, a Citgo EDMS QC Program
 Coordinated work with Stone and Websterto accurately design and draw isometric drawings on CAD using an in-house developed
isometric program
 Software used, Staad, Caesar, AutoCAD, and in-house developed Isometric application, a library based P&ID library for Process
drawings, FlexCad used with several in-plant assignment.
 Conoco Petroleum: Lead the Design/Drafting group to do both Isometric Fabrication Drawings, and P&ID walk downs.
 Recon Office: Converted/Redrew existing hard copy/manual piping drawings to cad and maintained all piping related drawings for
several small projects in several local industrial facilities as well as larger projects, mainly at Citgo Petroleum
 These projects included Small Bore Piping of all of the Citgo Petroleum Cat-crackers, A thru C, and the construction of large
reserve petroleum tanks in the tank farm
 Coordinated thru the Department of Transportation (DOT) to design an underground pipeline consisting ofseveral large bore lines
under the near-by Interstate

6. 
Page | 6 of 6
Pipe/Designer / Drafter / Cad
Petrocon Engineering (Direct)
Software: FlexCad/AutoCAD
February, 1991 — October, 1995 (4 years 8 months)
 Process Safety Management, (PSM) Project - Walk-down of equipment, related piping, instruments, and valves to produce P&IDs
and utility drawings.
 Responsible Care Project - Produced P&IDs for the Power Plant, Flare Systems, off gas,Water Treatment, Nitrogen Storage, Plant
Air and process utility units.
Drafter / Sketcher
Various Lake Charles Louisiana Area Construction Companies
January, 1983 — December, 1990 (7 years 12 months)
 Employed by various Lake Charles Louisiana Area Construction companies (Mainly West-Cal Construction) as a field sketcherfor
spoolreplacement/fabrication/corrosion and hydraulic isometrics.
EDUCATION
Sowela Technical Institute
Associates, Drafting and Design Technology
December, 1989 — May, 1991
Degree date: 1991
 Sowela Technical Institute - Associates degree in Drafting and Design Technology
 Attended from December, 1989 to May, 1991 while maintaining a 3.25GPA, specialized in Mechanical/Pipe design.
Louisiana State University (Scholarship)
BSME, Mechanical Engineering (Unfinished)
September, 1984 — August,1986
 Louisiana State University - September, 1984 until August 1986
 Mechanical Engineering, "Unfinished BSME"
Sulphur High School: Diploma May 1983
Sulphur High School - Sulphur, LA
ASSOCIATIONS
 Louisiana State University - "L" Club member, Tiger Football at LSU in 1984 to 1986
 Houston Oilers Football Organization - 1 season.
 Society of Piping Engineers & Designers (SPED IV Certification)