Сафонов Владимир Александрович, д.т.н., профессор кафедры «Возобновляемые источники энергии, электрические системы и сети» Института ядерной энергии и промышленности Севастопольского государственного университета (Севастополь) «Интегрированные интеллектуальные энергетические системы: тенденции, перспективы, идеология»
Презентация ТН-ТА модуля производства ООО "Стройтехинжиниринг"stinby
Презентация разработанного нашей компанией нового изделия "Теплонасосного Теплоаккумулирующего модуля" (ТН-ТА модуль), позволяющего аккумулировать и использовать для отопления и нужд ЖКХ низкопотенциальную энергию воды, воздуха и стоков.
Высокочастотные преобразователи для приборов ядерно-магнитного резонанса (ЯМ...SlavaAlexey
Доклад представлен на кафедре промышленной электроники
Киевского Политехнического Института
5 Июня 2013 года
Алексей Тышко
Alexey Tyshko
Principal Electrical Engineer
PetroMar Technologies
Pennsylvania, USA
Introduction to the beehive for websiteOne Economy
The document provides instructions for how to use The Beehive website. It explains that The Beehive is created and maintained by One Economy Corporation to help underserved communities access resources and information. It then provides step-by-step instructions for setting up an account on The Beehive website and navigating the site to access local resources, learn about topics like health, education, employment and more.
Сафонов Владимир Александрович, д.т.н., профессор кафедры «Возобновляемые источники энергии, электрические системы и сети» Института ядерной энергии и промышленности Севастопольского государственного университета (Севастополь) «Интегрированные интеллектуальные энергетические системы: тенденции, перспективы, идеология»
Презентация ТН-ТА модуля производства ООО "Стройтехинжиниринг"stinby
Презентация разработанного нашей компанией нового изделия "Теплонасосного Теплоаккумулирующего модуля" (ТН-ТА модуль), позволяющего аккумулировать и использовать для отопления и нужд ЖКХ низкопотенциальную энергию воды, воздуха и стоков.
Высокочастотные преобразователи для приборов ядерно-магнитного резонанса (ЯМ...SlavaAlexey
Доклад представлен на кафедре промышленной электроники
Киевского Политехнического Института
5 Июня 2013 года
Алексей Тышко
Alexey Tyshko
Principal Electrical Engineer
PetroMar Technologies
Pennsylvania, USA
Introduction to the beehive for websiteOne Economy
The document provides instructions for how to use The Beehive website. It explains that The Beehive is created and maintained by One Economy Corporation to help underserved communities access resources and information. It then provides step-by-step instructions for setting up an account on The Beehive website and navigating the site to access local resources, learn about topics like health, education, employment and more.
The team designed and built a working Stirling engine suitable for classroom demonstration that could run on solar energy. The engine uses a two cylinder inline "alpha" configuration. Through iterative testing and design refinements, the team was able to get the engine running using a handheld heat source. With more time, they believe the engine could be powered solely by solar energy as originally intended. The report documents the full design process, including initial concept selection, component design and fabrication, testing and design improvements made to optimize performance.
The document discusses the Stirling engine, an external combustion engine invented in 1816 by Robert Stirling as a safer alternative to steam engines. It works by alternately compressing and expanding a gas with temperature differences created between the hot and cold sections. Key advantages are its ability to run on various heat sources, its safety compared to steam, and lower environmental impact. Applications include power generation, heating, cooling, and more. The document outlines the history, components, working principles, types, advantages, applications and conclusion of the Stirling engine as a sustainable technology.
The Stirling engine was invented in 1816 by Robert Stirling as an alternative to steam engines due to their explosions. It works by alternately compressing and expanding a fixed quantity of air or other gas between a hot and cold section, driving a piston. There are three main types - alpha, beta, and gamma - distinguished by how they move the air between sections. Advantages include various heat sources, low pressure operation, and efficiency theoretically equal to Carnot efficiency. Applications include water pumps, solar power, micro-CHP, and cryocoolers.
A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas (the working fluid) at different temperatures, such that there is a net conversion of heat energy to mechanical work. More specifically, a closed-cycle regenerative heat engine with a permanently gaseous working fluid.
This document presents a project report on designing and building a working model of a Stirling engine. It includes sections on the abstract, introduction, literature review, methodology, setup and preparation, and conclusion. The introduction provides a brief history of the Stirling engine and its different types. The methodology section explains the Stirling thermodynamic cycle and calculations for cycle efficiency. The setup and preparation section details the fabrication and assembly of engine components like the cylinder, piston, displacer, and flywheel. The conclusion recognizes areas for further improvement, such as addressing friction and leakage issues to increase useful work output.
Экономия энергоресурсов – один из важнейших вопросов для предприятий тяжелой, легкой и пищевой промышленности. Многие технологические процессы и оборудование используют системы охлаждения, которые снимают излишек тепла и фактически выбрасывают его в окружающую среду. Наиболее популярный метод охлаждения – снятие тепла водяным контуром и дальнейший его выброс с помощью сухой или мокрой градирни. Температура охлаждающей воды может колебаться от 15 °С до 70 °С.
Выбрасываемое тепло нужно утилизировать и использовать в технологических процессах различного назначения, что наиболее целесообразно выполнить с помощью промышленного теплового насоса. Компания ООО «РЕАЛЭНЕРГО» совместно с финскими партнерами Oilon Scancool, производителями теплонасосного оборудования, разработала проект утилизации и использования бросового тепла контуров охлаждения.
Development and implementation new and innovative renewable energy technologies can substantially change the situation in the global energy sector. Particularly promising renewable energy sources (RES) in heating of individual houses in the first place away from centralized energy systems. Currently, of all types of renewable most widely used solar energy conversion technologies which are most developed and widely disseminated. For autonomous heating system is also one of the most promising and widely available source is the low-potential heat energy, in fact the same as the solar energy stored in the soil, water and air environment.
«Инновационные решения при производстве турбогенераторов для распределенной э...BDA
Артемов Александр Владимирович, заместитель директора по продажам ПАО НПО «ЭЛСИБ» «Инновационные решения при производстве турбогенераторов для распределенной энергетики»