Sumit Kardam is seeking a position in a reputed organization where he can contribute his potential and develop his skills. He has a diploma in mechanical engineering and over 2 years of experience working in production planning and as a shop floor supervisor at HEMSONS ENGINEER PVT LTD. His responsibilities there include production planning and scheduling, inventory management, process documentation, dispatch scheduling, and customer support. HEMSONS is an ISO certified company established in 1995 with a turnover of 54 crores in 2017-18 that manufactures two-wheeler parts for major customers.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
1. SUMIT KARDAM
VPO. ATALI, NEAR GARKHERA MORE
TEH. BALLABGARH
DIST: FARIDABAD
HARYANA- 121004
Mob: +91-8527643897
Email: - kardam125@gmail.com
Objective
Seeking a position in a reputed organization in which I can contribute with my
potential and develop my skills.
Academic Qualification
Metric Passed 1st
Division With 74% from HBSE, Bhiwani in Year 2011
Techincal Qualification
Diploma In Mechanical Engg. From Govt. Polytechnic Loharu (Bhiwani) All Clear
67%. From Year Session 2012-15
Auto CAD 2D Isometric & 3D
Computer Skills
Computer basic MS Office.
Good at handling Internet.
Technical Knowledge
One Month Training From Jay Ushin LTD Gurgaon.
One YearWorked At Global Auto-tech Ltd As Junior Engineer in Production Deptt.
Greater Noida. (May-2015 to June 2016)
2. JOB PROFILE
Presently working with HEMSONS ENGINEER PVT LTD. Plot No.18,31&32
Sector 59 Faridabad as a Engineer in PRODUCTION PLANNING & CONTROL
And IN SHOP FLOOR supervisor From June. 2016 To till Now.
JOB RESPONSIBILITY
Monthly, Weekly, Daily Production & Machinery Planning As Per Costumers
Scheduling Order.
Planning Day To Day Production Processes.
Monthly Raw Material Planning.
Daily RM & FG Stock Reviewing Maintaining Inventory.
Preparation Of Process Documents (Production Statement, Capacity Utilization,
FIFO System & OEE etc).
Involve Dispatch Scheduling.
Coordinate with Purchase & Job Work Planning.
Maintaining Good Housekeeping (5S Principles).
Involvement in New Development Parts.
Identifying Area for Continual improvement By Consulting My Senior.
Responsible for Manpower allotment & provide Them On Job Training.
Management Information System(MIS).
Customer Support.
CURRENT COMPANY PROFILE (HE):-
ISO/TS16949:2009 Certified Company. Established in Year 1995.Turnover 54 crores
in year 2017-18. The company is largely involved in manufacturing of Two Wheeler
Parts like Collar, shaft, spacer, brake rod, nut, bush rear brake pedal, Bush for grab
rail and foot rest rod for many reputed customer like Suzuki MotorcyclePvt. Ltd,
Yahama, Mahindra Two Wheeler Ltd., KYB etc.
JOB EXPERIENCE
Document record maintaining.
Rejection & rework analyses.
To supervision of SHOP FLOOR.
Manpower handling.
Making data of rejection & rework materials.
Resource & Purchase.
Job Work Out side.
Preparing Daily Production Report.
3. MAJOR CUSTOMERS
India Yamaha Motors PVT LTD.
Mahindra Two Wheelers PVT LTD.
Suzuki Motorcycle PVT LTD.
Avlight Auto Component PVT LTD.
Minda Auto Components PVT LTD.
Indo Auto-Tech LTD.
Ask Automotive PVT LTD.
UM India Two Wheeler PVT LTD. etc
Strengths
Commitment to Hardworking & Honesty
Learner from every moment of life.
Positive Attitude
Self Motivation
Weakness
Communication Gap
Personal Details
Father name : Sh. Prem Singh
Mother name : Mrs. Maya
Date of birth : 28/09/1995
Marital status : Unmarried
Gender : Male
Language known : Hindi, English
I hereby declare that all the information furnished above is true to the best of my
knowledge.
Date:
(Sumit)
Place: