studio_10_-_postersconcept_generation_and_evaluation_dec11_16_1.pptx
•Download as PPTX, PDF•
0 likes•2 views
This document provides guidance on preparing posters for an engineering design course. It recommends using A0 size with a 20-40-40 text-graphic-whitespace ratio in PowerPoint. Font types, sizes, and mandatory contents are outlined. Concept generation techniques like morphological analysis and evaluation methods like decision matrices are described. Students will use these techniques to generate and evaluate concepts for their final design project in a group activity.
Report
Share
Report
Share
Recommended
Slides 2015 for contact 2
The document provides an overview of the topics that will be covered in Operations Management Contact 2. It includes slides on product design, quality management, total quality management, six sigma, benchmarking, ISO standards, and service quality. Students are instructed to review the slides and textbook, prepare a one-page summary of the theory, apply the concepts to their organization, critique and suggest improvements to their organization's quality management, and complete a group assignment presenting quality management advice to a community organization.
Agile UX Breakfast Briefing Jun13
This document discusses adapting UX practices for agile development. It begins by explaining the limitations of traditional waterfall development and benefits of agile. It then outlines challenges UX faces in agile, like lack of big upfront design. Methods discussed for agile UX include lean UX principles, rapid prototyping and testing, collaborative design, and representing users through personas and story mapping. The document emphasizes adapting UX to be integrated, iterative and focus on delivering working software over documentation.
Agile UX Breakfast Briefing jun13
This document discusses adapting UX practices for agile development. It begins by explaining the limitations of traditional waterfall development and benefits of agile. It then outlines challenges UX faces in agile, like lack of big upfront design. Methods discussed for agile UX include lean UX principles, rapid prototyping and testing, collaborative design, and representing users through personas and story mapping. The document emphasizes adapting practices for quick feedback rather than big documentation, and keeping the focus on customer needs, business goals, and technology realities.
Ross Smith Co-op Final Presentation
Michael Ross Smith completed his first co-op term at Honda working in the Paint department under supervisors Greg Howard and Troy Chapman. He learned CATIA modeling software and used it to design fixtures, props, and supports. He also updated operation standards and safety risks in Honda's PDDA system. Some of his projects included modeling bumper supports for a new car model and testing prototypes. Overall, he gained experience in 3D modeling, design, and working in a professional automotive setting.
Mi 291 chapter 1 (introduction)
This document provides information about the Engineering Design & Analysis course MI-291 at IIT Roorkee. It includes details such as course instructors, contact hours, credits, objectives, and chapters to be covered. The course aims to describe the role of analysis in engineering design and enhance critical thinking and design skills. It will cover topics such as the design process, engineering analysis, reverse engineering, learning from failures, and engineering design projects.
Chapter 1 intr m dfina
This document provides an overview of key concepts in mechanical engineering design. It discusses the phases of design including identifying needs, defining problems, synthesizing solutions, analysis and optimization, testing, and presentation. Important considerations in design are addressed such as functionality, safety, reliability, manufacturability, and economics. Design tools, codes and standards, and a designer's professional responsibilities are also summarized. The document aims to outline the systematic process of mechanical engineering design.
Completion Decision Making with Cross Discipline Integration
The Completion Engineer integrates the requirements of a number of other disciplines (Reservoir, Drilling, Production, etc) to maximize the value of a hydrocarbon resource. This almost always requires evaluating competing and conflicting factors to determine the 'best' option for a particular problem. This talk will demonstrate a decision making process that allows the stakeholders to compare various options in a fair and roboust way. Two real onshore or offshore examples will be reviewed depending on SPE chapter interest. Members will take away a new methodology on how to compare competing factors that influence a completion or well design.
Chapter 1 intr m dfina
This document provides an overview of key concepts in mechanical engineering design. It discusses the phases of design including identifying needs, defining problems, synthesizing solutions, analysis and optimization, testing, and presentation. It also covers considerations like functionality, safety, reliability and manufacturability. Design tools like CAD, CAE, standards, codes and economics are reviewed. The responsibilities of design engineers to follow a systematic process are outlined.
Recommended
Slides 2015 for contact 2
The document provides an overview of the topics that will be covered in Operations Management Contact 2. It includes slides on product design, quality management, total quality management, six sigma, benchmarking, ISO standards, and service quality. Students are instructed to review the slides and textbook, prepare a one-page summary of the theory, apply the concepts to their organization, critique and suggest improvements to their organization's quality management, and complete a group assignment presenting quality management advice to a community organization.
Agile UX Breakfast Briefing Jun13
This document discusses adapting UX practices for agile development. It begins by explaining the limitations of traditional waterfall development and benefits of agile. It then outlines challenges UX faces in agile, like lack of big upfront design. Methods discussed for agile UX include lean UX principles, rapid prototyping and testing, collaborative design, and representing users through personas and story mapping. The document emphasizes adapting UX to be integrated, iterative and focus on delivering working software over documentation.
Agile UX Breakfast Briefing jun13
This document discusses adapting UX practices for agile development. It begins by explaining the limitations of traditional waterfall development and benefits of agile. It then outlines challenges UX faces in agile, like lack of big upfront design. Methods discussed for agile UX include lean UX principles, rapid prototyping and testing, collaborative design, and representing users through personas and story mapping. The document emphasizes adapting practices for quick feedback rather than big documentation, and keeping the focus on customer needs, business goals, and technology realities.
Ross Smith Co-op Final Presentation
Michael Ross Smith completed his first co-op term at Honda working in the Paint department under supervisors Greg Howard and Troy Chapman. He learned CATIA modeling software and used it to design fixtures, props, and supports. He also updated operation standards and safety risks in Honda's PDDA system. Some of his projects included modeling bumper supports for a new car model and testing prototypes. Overall, he gained experience in 3D modeling, design, and working in a professional automotive setting.
Mi 291 chapter 1 (introduction)
This document provides information about the Engineering Design & Analysis course MI-291 at IIT Roorkee. It includes details such as course instructors, contact hours, credits, objectives, and chapters to be covered. The course aims to describe the role of analysis in engineering design and enhance critical thinking and design skills. It will cover topics such as the design process, engineering analysis, reverse engineering, learning from failures, and engineering design projects.
Chapter 1 intr m dfina
This document provides an overview of key concepts in mechanical engineering design. It discusses the phases of design including identifying needs, defining problems, synthesizing solutions, analysis and optimization, testing, and presentation. Important considerations in design are addressed such as functionality, safety, reliability, manufacturability, and economics. Design tools, codes and standards, and a designer's professional responsibilities are also summarized. The document aims to outline the systematic process of mechanical engineering design.
Completion Decision Making with Cross Discipline Integration
The Completion Engineer integrates the requirements of a number of other disciplines (Reservoir, Drilling, Production, etc) to maximize the value of a hydrocarbon resource. This almost always requires evaluating competing and conflicting factors to determine the 'best' option for a particular problem. This talk will demonstrate a decision making process that allows the stakeholders to compare various options in a fair and roboust way. Two real onshore or offshore examples will be reviewed depending on SPE chapter interest. Members will take away a new methodology on how to compare competing factors that influence a completion or well design.
Chapter 1 intr m dfina
This document provides an overview of key concepts in mechanical engineering design. It discusses the phases of design including identifying needs, defining problems, synthesizing solutions, analysis and optimization, testing, and presentation. It also covers considerations like functionality, safety, reliability and manufacturability. Design tools like CAD, CAE, standards, codes and economics are reviewed. The responsibilities of design engineers to follow a systematic process are outlined.
The Pros and Cons of 3D Modeling Paradigms: Direct Modeling and History-based...
Engineering is really all about problem solving. In product design, this means exploring, iterating, changing, testing, and changing again until an optimized solution is found, designed and built. To empower engineers and designers to be able to design truly innovative products, they need tools that are both flexible and powerful.
Parametric, feature-based 3D modeling tools provide engineers with a methodical, orderly and powerfully automated way to create complex models. These tools require engineers to anticipate and define feature constraints, relations and dependencies, which ensure that any design change will be reflected in all downstream geometry. Though powerful, these tools often make edits difficult, especially for those that didn¹t create the original model.
Direct modeling, on the other hand, enables users to take a more flexible, intuitive approach to creating geometry and doesn¹t carry the overhead of history-based dependencies. Users can directly manipulate model geometry without regard to how that geometry was created. To make changes, users simply grab, pull and drag geometry, making direct modeling an easier modeling paradigm to use.
Both approaches have their advantages and disadvantages. Each provides a different kind of value for each stage of development. In this webinar, our speakers will discuss how each modeling paradigm can be used in three phases of product development (concept development, simulation, detailed design).
Coursework Assignment Design of a taxi meter .docx
Coursework Assignment
Design of a taxi meter
Module Name: Electronic Systems Integration
Module Code: 6006ELE
Level: 6
Credit Rating: 20
Weighting: 50%
Lecturer: Dr Zhigang Ji
Contact: If you have any issues with this coursework you may contact your lecturer.
Contact details are:
Email: [email protected]
Tel: 0151 231 2505
Room: 509a, James Parson Building, Byrom Street
Issue Date: 29 January 2018
Hand-in Date: 26 March 2018
Feedback: Feedback will be given when your coursework is returned to you within three
weeks. Feedback will be both written and verbal.
Programmes: BEng (Hons) Electrical and Electronics Engineering
School of Engineering,
Technology and Maritime Operations
mailto:[email protected]
Introduction
The objective is to design a taxi meter and simulate it using the Proteus ISIS. In this assignment, students
are required to
• Design the typical data acquisition system.
• Design the power supply to provide stable and specific voltage output.
• Analyze a hardware design problem and produce suitable design solution using microcontroller
and human/physical interfaces.
• Write program using assembly language for the microcontroller.
Learning Outcomes Assessed
LO3 Design and implement microprocessor based analogue and digital systems.
LO4 Design peripheral components for digital and analogue systems power supplies, bus structures,
memories and interfacing/signal processing circuits.
This assignment will assess elements of the above learning outcomes.
UK-SPEC Learning Outcomes
US1 Knowledge and understanding of scientific principles and methodology necessary to underpin
their education in their engineering discipline, to enable appreciation of its scientific and
engineering context, and to support their understanding of historical, current, and future
developments and technologies.
US2 Knowledge and understanding of mathematical principles necessary to underpin their education
in their engineering discipline and to enable them to apply mathematical methods, tools and
notations proficiently in the analysis and solution of engineering problems.
US3 Ability to apply and integrate knowledge and understanding of other engineering disciplines to
support study of their own engineering discipline.
E1 Understanding of engineering principles and the ability to apply them to analyse key engineering
processes.
E2 Ability to identify, classify and describe the performance of systems and components through the
use of analytical methods and modelling techniques.
E3 Ability to apply quantitative methods and computer software relevant to their engineering
discipline, in order to solve engineering problems.
E4 Understanding of and ability to apply a systems approach to engineering problems
D1 Investigate and define a problem and identify constraints including environmental and
sustainability limitations, health and safety.
Slides 2015 for contact 4
The document provides an overview of the topics and learning outcomes that will be covered in an operations management contact session. It includes slides on location strategy, factors that influence location decisions, methods for evaluating location alternatives, and an introduction to concepts around managing people as part of operations. Students are instructed to review the slides and textbook, ask questions if anything is unclear, and complete assignments applying the concepts to real-world organizations. They are to submit a individual report and group presentation summarizing and critiquing approaches to location decisions and people management.
Collaboration Case Study Antec 2016
This document summarizes a case study on utilizing round-table plastic design reviews to promote plastics engineering excellence. The key points are:
1) A project involving over 700 custom injection molds, 50+ designers, and communication across 3 regions adopted round-table reviews to improve communication.
2) Round-table reviews involved collaborative discussions from various perspectives like project management, tooling, design, and processing. This identified issues early and explored solutions.
3) As a result of the round-table reviews, the project saw improvements in areas like mold simulation utilization, adopting new technologies, keeping to schedules, and developing employee skills. Overall, product quality, costs and execution benefited from the improved collaboration.
The Art of Project Estimation
This document discusses various techniques for project estimation. It begins by outlining the goals of estimation and what is needed to perform estimations. It then discusses expected results and provides examples of three point estimation and the Delphi method. A variety of techniques are covered such as planning poker, proxy-based estimation, and functional point analysis. Common mistakes are reviewed and cognitive biases that can impact estimations. The document provides a helpful overview of project estimation approaches.
UCD and Technical Communication: The Inevitable Marriage
Presentation about the increasingly collaboration and needs of technical communication to work with and become competent within UX and UCD methods and principles.
Chapter one introduction optimization
Optimization involves obtaining the best result under given circumstances. Structural optimization aims to design structural assemblies to sustain loads in the optimal way. There are three main types of structural optimization problems based on the geometric feature: sizing optimization which determines optimal member sizes; shape optimization which finds the optimal shape within a given domain; and topology optimization which finds the optimal connectivity and boundaries of a structure. Any optimization problem consists of design variables, an objective function to minimize or maximize, and constraints that must be satisfied for a feasible solution. Structural optimization examples include minimum weight design of frames and trusses subject to stress and stability constraints.
2_Analogy btw science math and engineering and ED.pptx
An analogy between SMEs (Small and Medium Enterprises) and design could be drawn in various ways, highlighting similarities in their characteristics, processes, or importance. Here's one analogy:
Foundation and Flexibility:
SMEs are often likened to the building blocks of an economy, providing the foundation for growth and innovation. Similarly, design serves as the foundation for products, services, and experiences, shaping their functionality, usability, and aesthetics.
Just as SMEs need to be flexible and adaptable to changing market conditions, design also requires flexibility to meet evolving user needs, technological advancements, and design trends.
Problem-Solving Approach:
SMEs typically thrive by addressing niche markets, solving specific problems, or fulfilling unmet needs. Similarly, design is fundamentally about problem-solving, whether it's improving user experiences, optimizing efficiency, or enhancing aesthetics.
Both SMEs and design involve identifying challenges, brainstorming solutions, and implementing strategies to achieve desired outcomes.
Ar1 twf030 lecture1.1
Lecture notes of the course Future Models I (AR1TWF030), The Why Factory, Directed by Prof. Winy Mass, TU Delft, Faculty of Architecture and Built Environment
The Benefits of using Systems Thinking in Project Management
Systems thinking can provide benefits at multiple stages of project management. It enables a fuller understanding of the problem and solution by considering the overall system. This reduces issues during project execution and allows more focus on communication. The case study showed how Portsmouth Council used systems thinking to reduce housing maintenance times by over 50% and costs by 10% while improving customer satisfaction.
Completion Decision Making with Cross Discipline Integration
The document describes a completion selection process using decision matrix analysis to evaluate multiple completion options for an offshore well with poor reservoir properties. An integrated team identifies key evaluation factors like sand prevention, production rate, and water shut-off. They then rank completion options like vertical cased and perforated, vertical gravel pack, and horizontal options. Calculations show a horizontal open hole gravel pack provides the best production and reserves recovery within constraints. The process promotes cross-discipline collaboration and ensures the completion addresses each group's priorities.
Learning from Learnings: Anatomy of Three Incidents
The best response to a system outage is not "What did you do?", but "What did we learn?" This session will walk through three system-wide outages at Google, at Stitch Fix, and at WeWork—their incidents, aftermaths, and recoveries. In all cases, many things went right and a few went wrong; also in all cases, because of blameless cultures, we buckled down, learned a lot, and made substantial improvements in the systems for the future. Looking back with the perspective of 20-20 hindsight, all of these incidents were seminal events that changed the focus and trajectory of engineering at each organization. You will leave with a set of actionable suggestions in dealing with customers, engineering teams, and upper management. You will also enjoy a few war stories from the trenches.
Preference and Desirability Testing, Measuring Emotional Response to Guide De...
Preference and Desirability Testing, Measuring Emotional Response to Guide Design - UPA 2011 - Michael Hawley & Paul Doncaster
Mastering universal theme
One of the most important features of Oracle Application Express 5 is the Universal Theme. This theme allows every database developer to create great looking applications without knowing any JavaScript, HTML or CSS.
But how do you make changes to comply to your company branding in such a way you don't break anything else? And how do you add new templates and template options?
In this session you will learn how the Universal Theme works, what the components are and what you should and shouldn't do when you make your changes.
Best Practices on Driving Design Decisions with Simulation
This webinar will provide guidance to attendees on how to drive more engineering decisions using simulation tools.
Today, there are lots of different options. You can provide automation tools to simulation analysts to improve their productivity or you could provide CAD-embedded simulation tools to engineers for early simulation feedback on a daily basis. What is recommended can vary by company size. What works for a large company can and should be dramatically different than a small design shop.
Our panel of experts from Lifecycle Insights, Dassault Systems SIMULIA, Siemens PLM Software and Ansys will present their respective best practices.
Introduction to conjoint analysis 2021
Conjoint analysis is a technique used to understand how people value different attributes or features of a product or service. It involves showing people combinations of attributes and levels and asking them to choose their preferred options. This allows researchers to model the importance of attributes and understand how people trade off different features. The document provides an overview of conjoint analysis, including what problems it can address, how it works, and key considerations in designing a conjoint study. An example study is presented to illustrate attribute selection, task design, and the type of outputs generated, including part-worth utilities and importance scores.
Design Thinking for Requirements Engineering
This document provides an overview of a tutorial on Design Thinking for Requirements Engineering (DT4RE). The tutorial aims to introduce basic principles and methods of Design Thinking and discuss how it can be integrated with Requirements Engineering. It outlines different approaches to integrating Design Thinking and Requirements Engineering based on the complexity of the project from pure Design Thinking to fully integrated approaches. The tutorial also discusses open research challenges around principles, artifacts, project influences, methods adoption, and operationalization of Design Thinking and Requirements Engineering processes.
Chapter 17: Responsive Web Design
Responsive web design (RWD) allows web pages to adapt to different screen sizes. There are three main components: a flexible grid, flexible images, and CSS media queries. Media queries apply different styles depending on screen width and features. Designers create breakpoints for layout changes and optimize content hierarchy, typography, navigation, and other elements for different screen sizes through testing on actual devices.
Intern Project Showcase.pptx
(1) The document discusses Microsoft Whiteboard's new URL unfurling feature which allows clicking on URLs within the whiteboard to preview web page content and metadata.
(2) It describes competitors' offerings, important use cases, potential solutions explored, and the final solution of using the Hubble and URL Preview services to scrape URL metadata and display it in an iframe with additional description.
(3) Challenges included navigating the large codebase as an intern and initial issues with React/Redux integration, but the learning experience strengthened the presenter's technical skills and understanding of front-end development practices.
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarMr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
Mr. Brainwash Beautiful Girl / Mixed Media / signed / Unique
Year: 2023
Format: 96,5 x 127 cm / 37.8 x 50 inch
Material: Fine Art Paper with hand-torn edges.
Method: Mixed Media, Stencil, Spray Paint.
Edition: Unique
Other: handsigned by Mr. Brainwash front and verso.
Beautiful Girl by Mr. Brainwash is a mixed media artwork on paper done in 2023. It is unique and of course signed by Mr. Brainwash. The picture is a tribute to his own most successful work of art, the Balloon Girl. In this new creation, however, the theme of the little girl is slightly modified.
In Mr. Brainwash’s mixed media artwork titled “Beautiful Girl,” we are presented with a captivating depiction of a little girl adorned in a summer dress, with two playful pigtails framing her face. The artwork exudes a sense of innocence and whimsy, as the girl is shown in a dreamy state, lifting one end of her skirt and looking down as if she were about to dance. Through the use of mixed media, Mr. Brainwash skillfully combines different artistic elements to create a visually striking composition. The vibrant colors and bold brushstrokes bring the artwork to life, evoking a sense of joy and happiness. The attention to detail in the girl’s expression and body language adds depth and character to the piece, allowing viewers to connect with the young protagonist on a personal and emotional level. “Beautiful Girl” is a testament to Mr. Brainwash’s unique artistic style, blending elements of street art, pop art, and contemporary art to create a visually captivating and emotionally resonant artwork.
The use of mixed media in “Beautiful Girl” adds an additional layer of complexity to the artwork. By combining different artistic techniques and materials, such as stencils, spray paint, and collage, Mr. Brainwash creates a dynamic and textured composition that grabs the viewer’s attention. The juxtaposition of different textures and patterns adds depth and visual interest to the piece, while also emphasizing the artist’s eclectic and experimental approach to art-making. The inclusion of collage elements, such as newspaper clippings and torn posters, further enhances the artwork’s urban and contemporary feel. Overall, “Beautiful Girl” is a visually captivating and thought-provoking artwork that showcases Mr. Brainwash’s talent for blending different artistic elements to create a truly unique and engaging piece.
More Related Content
Similar to studio_10_-_postersconcept_generation_and_evaluation_dec11_16_1.pptx
The Pros and Cons of 3D Modeling Paradigms: Direct Modeling and History-based...
Engineering is really all about problem solving. In product design, this means exploring, iterating, changing, testing, and changing again until an optimized solution is found, designed and built. To empower engineers and designers to be able to design truly innovative products, they need tools that are both flexible and powerful.
Parametric, feature-based 3D modeling tools provide engineers with a methodical, orderly and powerfully automated way to create complex models. These tools require engineers to anticipate and define feature constraints, relations and dependencies, which ensure that any design change will be reflected in all downstream geometry. Though powerful, these tools often make edits difficult, especially for those that didn¹t create the original model.
Direct modeling, on the other hand, enables users to take a more flexible, intuitive approach to creating geometry and doesn¹t carry the overhead of history-based dependencies. Users can directly manipulate model geometry without regard to how that geometry was created. To make changes, users simply grab, pull and drag geometry, making direct modeling an easier modeling paradigm to use.
Both approaches have their advantages and disadvantages. Each provides a different kind of value for each stage of development. In this webinar, our speakers will discuss how each modeling paradigm can be used in three phases of product development (concept development, simulation, detailed design).
Coursework Assignment Design of a taxi meter .docx
Coursework Assignment
Design of a taxi meter
Module Name: Electronic Systems Integration
Module Code: 6006ELE
Level: 6
Credit Rating: 20
Weighting: 50%
Lecturer: Dr Zhigang Ji
Contact: If you have any issues with this coursework you may contact your lecturer.
Contact details are:
Email: [email protected]
Tel: 0151 231 2505
Room: 509a, James Parson Building, Byrom Street
Issue Date: 29 January 2018
Hand-in Date: 26 March 2018
Feedback: Feedback will be given when your coursework is returned to you within three
weeks. Feedback will be both written and verbal.
Programmes: BEng (Hons) Electrical and Electronics Engineering
School of Engineering,
Technology and Maritime Operations
mailto:[email protected]
Introduction
The objective is to design a taxi meter and simulate it using the Proteus ISIS. In this assignment, students
are required to
• Design the typical data acquisition system.
• Design the power supply to provide stable and specific voltage output.
• Analyze a hardware design problem and produce suitable design solution using microcontroller
and human/physical interfaces.
• Write program using assembly language for the microcontroller.
Learning Outcomes Assessed
LO3 Design and implement microprocessor based analogue and digital systems.
LO4 Design peripheral components for digital and analogue systems power supplies, bus structures,
memories and interfacing/signal processing circuits.
This assignment will assess elements of the above learning outcomes.
UK-SPEC Learning Outcomes
US1 Knowledge and understanding of scientific principles and methodology necessary to underpin
their education in their engineering discipline, to enable appreciation of its scientific and
engineering context, and to support their understanding of historical, current, and future
developments and technologies.
US2 Knowledge and understanding of mathematical principles necessary to underpin their education
in their engineering discipline and to enable them to apply mathematical methods, tools and
notations proficiently in the analysis and solution of engineering problems.
US3 Ability to apply and integrate knowledge and understanding of other engineering disciplines to
support study of their own engineering discipline.
E1 Understanding of engineering principles and the ability to apply them to analyse key engineering
processes.
E2 Ability to identify, classify and describe the performance of systems and components through the
use of analytical methods and modelling techniques.
E3 Ability to apply quantitative methods and computer software relevant to their engineering
discipline, in order to solve engineering problems.
E4 Understanding of and ability to apply a systems approach to engineering problems
D1 Investigate and define a problem and identify constraints including environmental and
sustainability limitations, health and safety.
Slides 2015 for contact 4
The document provides an overview of the topics and learning outcomes that will be covered in an operations management contact session. It includes slides on location strategy, factors that influence location decisions, methods for evaluating location alternatives, and an introduction to concepts around managing people as part of operations. Students are instructed to review the slides and textbook, ask questions if anything is unclear, and complete assignments applying the concepts to real-world organizations. They are to submit a individual report and group presentation summarizing and critiquing approaches to location decisions and people management.
Collaboration Case Study Antec 2016
This document summarizes a case study on utilizing round-table plastic design reviews to promote plastics engineering excellence. The key points are:
1) A project involving over 700 custom injection molds, 50+ designers, and communication across 3 regions adopted round-table reviews to improve communication.
2) Round-table reviews involved collaborative discussions from various perspectives like project management, tooling, design, and processing. This identified issues early and explored solutions.
3) As a result of the round-table reviews, the project saw improvements in areas like mold simulation utilization, adopting new technologies, keeping to schedules, and developing employee skills. Overall, product quality, costs and execution benefited from the improved collaboration.
The Art of Project Estimation
This document discusses various techniques for project estimation. It begins by outlining the goals of estimation and what is needed to perform estimations. It then discusses expected results and provides examples of three point estimation and the Delphi method. A variety of techniques are covered such as planning poker, proxy-based estimation, and functional point analysis. Common mistakes are reviewed and cognitive biases that can impact estimations. The document provides a helpful overview of project estimation approaches.
UCD and Technical Communication: The Inevitable Marriage
Presentation about the increasingly collaboration and needs of technical communication to work with and become competent within UX and UCD methods and principles.
Chapter one introduction optimization
Optimization involves obtaining the best result under given circumstances. Structural optimization aims to design structural assemblies to sustain loads in the optimal way. There are three main types of structural optimization problems based on the geometric feature: sizing optimization which determines optimal member sizes; shape optimization which finds the optimal shape within a given domain; and topology optimization which finds the optimal connectivity and boundaries of a structure. Any optimization problem consists of design variables, an objective function to minimize or maximize, and constraints that must be satisfied for a feasible solution. Structural optimization examples include minimum weight design of frames and trusses subject to stress and stability constraints.
2_Analogy btw science math and engineering and ED.pptx
An analogy between SMEs (Small and Medium Enterprises) and design could be drawn in various ways, highlighting similarities in their characteristics, processes, or importance. Here's one analogy:
Foundation and Flexibility:
SMEs are often likened to the building blocks of an economy, providing the foundation for growth and innovation. Similarly, design serves as the foundation for products, services, and experiences, shaping their functionality, usability, and aesthetics.
Just as SMEs need to be flexible and adaptable to changing market conditions, design also requires flexibility to meet evolving user needs, technological advancements, and design trends.
Problem-Solving Approach:
SMEs typically thrive by addressing niche markets, solving specific problems, or fulfilling unmet needs. Similarly, design is fundamentally about problem-solving, whether it's improving user experiences, optimizing efficiency, or enhancing aesthetics.
Both SMEs and design involve identifying challenges, brainstorming solutions, and implementing strategies to achieve desired outcomes.
Ar1 twf030 lecture1.1
Lecture notes of the course Future Models I (AR1TWF030), The Why Factory, Directed by Prof. Winy Mass, TU Delft, Faculty of Architecture and Built Environment
The Benefits of using Systems Thinking in Project Management
Systems thinking can provide benefits at multiple stages of project management. It enables a fuller understanding of the problem and solution by considering the overall system. This reduces issues during project execution and allows more focus on communication. The case study showed how Portsmouth Council used systems thinking to reduce housing maintenance times by over 50% and costs by 10% while improving customer satisfaction.
Completion Decision Making with Cross Discipline Integration
The document describes a completion selection process using decision matrix analysis to evaluate multiple completion options for an offshore well with poor reservoir properties. An integrated team identifies key evaluation factors like sand prevention, production rate, and water shut-off. They then rank completion options like vertical cased and perforated, vertical gravel pack, and horizontal options. Calculations show a horizontal open hole gravel pack provides the best production and reserves recovery within constraints. The process promotes cross-discipline collaboration and ensures the completion addresses each group's priorities.
Learning from Learnings: Anatomy of Three Incidents
The best response to a system outage is not "What did you do?", but "What did we learn?" This session will walk through three system-wide outages at Google, at Stitch Fix, and at WeWork—their incidents, aftermaths, and recoveries. In all cases, many things went right and a few went wrong; also in all cases, because of blameless cultures, we buckled down, learned a lot, and made substantial improvements in the systems for the future. Looking back with the perspective of 20-20 hindsight, all of these incidents were seminal events that changed the focus and trajectory of engineering at each organization. You will leave with a set of actionable suggestions in dealing with customers, engineering teams, and upper management. You will also enjoy a few war stories from the trenches.
Preference and Desirability Testing, Measuring Emotional Response to Guide De...
Preference and Desirability Testing, Measuring Emotional Response to Guide Design - UPA 2011 - Michael Hawley & Paul Doncaster
Mastering universal theme
One of the most important features of Oracle Application Express 5 is the Universal Theme. This theme allows every database developer to create great looking applications without knowing any JavaScript, HTML or CSS.
But how do you make changes to comply to your company branding in such a way you don't break anything else? And how do you add new templates and template options?
In this session you will learn how the Universal Theme works, what the components are and what you should and shouldn't do when you make your changes.
Best Practices on Driving Design Decisions with Simulation
This webinar will provide guidance to attendees on how to drive more engineering decisions using simulation tools.
Today, there are lots of different options. You can provide automation tools to simulation analysts to improve their productivity or you could provide CAD-embedded simulation tools to engineers for early simulation feedback on a daily basis. What is recommended can vary by company size. What works for a large company can and should be dramatically different than a small design shop.
Our panel of experts from Lifecycle Insights, Dassault Systems SIMULIA, Siemens PLM Software and Ansys will present their respective best practices.
Introduction to conjoint analysis 2021
Conjoint analysis is a technique used to understand how people value different attributes or features of a product or service. It involves showing people combinations of attributes and levels and asking them to choose their preferred options. This allows researchers to model the importance of attributes and understand how people trade off different features. The document provides an overview of conjoint analysis, including what problems it can address, how it works, and key considerations in designing a conjoint study. An example study is presented to illustrate attribute selection, task design, and the type of outputs generated, including part-worth utilities and importance scores.
Design Thinking for Requirements Engineering
This document provides an overview of a tutorial on Design Thinking for Requirements Engineering (DT4RE). The tutorial aims to introduce basic principles and methods of Design Thinking and discuss how it can be integrated with Requirements Engineering. It outlines different approaches to integrating Design Thinking and Requirements Engineering based on the complexity of the project from pure Design Thinking to fully integrated approaches. The tutorial also discusses open research challenges around principles, artifacts, project influences, methods adoption, and operationalization of Design Thinking and Requirements Engineering processes.
Chapter 17: Responsive Web Design
Responsive web design (RWD) allows web pages to adapt to different screen sizes. There are three main components: a flexible grid, flexible images, and CSS media queries. Media queries apply different styles depending on screen width and features. Designers create breakpoints for layout changes and optimize content hierarchy, typography, navigation, and other elements for different screen sizes through testing on actual devices.
Intern Project Showcase.pptx
(1) The document discusses Microsoft Whiteboard's new URL unfurling feature which allows clicking on URLs within the whiteboard to preview web page content and metadata.
(2) It describes competitors' offerings, important use cases, potential solutions explored, and the final solution of using the Hubble and URL Preview services to scrape URL metadata and display it in an iframe with additional description.
(3) Challenges included navigating the large codebase as an intern and initial issues with React/Redux integration, but the learning experience strengthened the presenter's technical skills and understanding of front-end development practices.
Similar to studio_10_-_postersconcept_generation_and_evaluation_dec11_16_1.pptx (20)
The Pros and Cons of 3D Modeling Paradigms: Direct Modeling and History-based...
The Pros and Cons of 3D Modeling Paradigms: Direct Modeling and History-based...
Coursework Assignment Design of a taxi meter .docx
Coursework Assignment Design of a taxi meter .docx
Can Crusher Device - Theory of Machines Mini-Project
Can Crusher Device - Theory of Machines Mini-Project
UCD and Technical Communication: The Inevitable Marriage
UCD and Technical Communication: The Inevitable Marriage
2_Analogy btw science math and engineering and ED.pptx
2_Analogy btw science math and engineering and ED.pptx
The Benefits of using Systems Thinking in Project Management
The Benefits of using Systems Thinking in Project Management
Completion Decision Making with Cross Discipline Integration
Completion Decision Making with Cross Discipline Integration
Learning from Learnings: Anatomy of Three Incidents
Learning from Learnings: Anatomy of Three Incidents
Preference and Desirability Testing, Measuring Emotional Response to Guide De...
Preference and Desirability Testing, Measuring Emotional Response to Guide De...
Best Practices on Driving Design Decisions with Simulation
Best Practices on Driving Design Decisions with Simulation
Recently uploaded
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarMr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
Mr. Brainwash Beautiful Girl / Mixed Media / signed / Unique
Year: 2023
Format: 96,5 x 127 cm / 37.8 x 50 inch
Material: Fine Art Paper with hand-torn edges.
Method: Mixed Media, Stencil, Spray Paint.
Edition: Unique
Other: handsigned by Mr. Brainwash front and verso.
Beautiful Girl by Mr. Brainwash is a mixed media artwork on paper done in 2023. It is unique and of course signed by Mr. Brainwash. The picture is a tribute to his own most successful work of art, the Balloon Girl. In this new creation, however, the theme of the little girl is slightly modified.
In Mr. Brainwash’s mixed media artwork titled “Beautiful Girl,” we are presented with a captivating depiction of a little girl adorned in a summer dress, with two playful pigtails framing her face. The artwork exudes a sense of innocence and whimsy, as the girl is shown in a dreamy state, lifting one end of her skirt and looking down as if she were about to dance. Through the use of mixed media, Mr. Brainwash skillfully combines different artistic elements to create a visually striking composition. The vibrant colors and bold brushstrokes bring the artwork to life, evoking a sense of joy and happiness. The attention to detail in the girl’s expression and body language adds depth and character to the piece, allowing viewers to connect with the young protagonist on a personal and emotional level. “Beautiful Girl” is a testament to Mr. Brainwash’s unique artistic style, blending elements of street art, pop art, and contemporary art to create a visually captivating and emotionally resonant artwork.
The use of mixed media in “Beautiful Girl” adds an additional layer of complexity to the artwork. By combining different artistic techniques and materials, such as stencils, spray paint, and collage, Mr. Brainwash creates a dynamic and textured composition that grabs the viewer’s attention. The juxtaposition of different textures and patterns adds depth and visual interest to the piece, while also emphasizing the artist’s eclectic and experimental approach to art-making. The inclusion of collage elements, such as newspaper clippings and torn posters, further enhances the artwork’s urban and contemporary feel. Overall, “Beautiful Girl” is a visually captivating and thought-provoking artwork that showcases Mr. Brainwash’s talent for blending different artistic elements to create a truly unique and engaging piece.
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKAFull CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
Full CAD Project Cardiovascuwhore Debut PDF CAD
Meena Pittman
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpboss Matka GuessingA Brief Introduction About Hanying Chen_
Vancouver-based artist Hanying Chen boasts extensive skills in writing, directing, producing, and singing, reflecting her diverse talents in the performing arts. As she looks ahead, Hanying is driven to craft a fulfilling career path that harmonizes with her deep passion for artistic expression. In the coming years, she envisions cultivating a balanced life, blending her professional aspirations with her desire to foster meaningful connections in her vibrant urban community.
原版制作(UNITO毕业证书)都灵大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(UNITO毕业证书)都灵大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
"Snow" by Ann Beattie illustrated into comic by aimie bourgeois
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka ! Fix Satta Matka ! Matka Result ! Matka Guessing ! ...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka ! Fix Satta Matka ! Matka Result ! Matka Guessing ! ...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka ! Fix Satta Matka ! Matka Result ! Matka Guessing ! Final Matka ! Matka Result ! Dpboss Matka ! Matka Guessing ! Satta Matta Matka 143 ! Kalyan Matka ! Satta Matka Fast Result ! Kalyan Matka Guessing ! Dpboss Matka Guessing ! Satta 143 ! Kalyan Chart ! Kalyan final ! Satta guessing ! Matka tips ! Matka 143 ! India Matka ! Matka 420 ! matka Mumbai ! Satta chart ! Indian Satta ! Satta King ! Satta 143 ! Satta batta ! Satta मटका ! Satta chart ! Matka 143 ! Matka Satta ! India Matka ! Indian Satta Matka ! Final ankDpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar. Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian MatkaThe Evolution and Impact of Hip Hop a cultural and artistic
RGMDEZFE by RGM DEZ streaming everywhere Spotify, Apple Music, iTunes ,Tidal and etc
哪里办理(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书原版一模一样
原版定制【微信:bwp0011】《(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
一比一原版迪肯大学毕业证(DU毕业证书)学历如何办理
多少钱办理【微信号:176555708】【多少钱办理(DU毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Tanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
Explore the exquisite art of Tanjore Painting, known for its vibrant colors, gold foil work, and traditional themes. Discover its cultural significance today!
Recently uploaded (20)
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
Full CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
Full CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka ! Fix Satta Matka ! Matka Result ! Matka Guessing ! ...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka ! Fix Satta Matka ! Matka Result ! Matka Guessing ! ...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
The Evolution and Impact of Hip Hop a cultural and artistic
The Evolution and Impact of Hip Hop a cultural and artistic
Tanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
Tanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
studio_10_-_postersconcept_generation_and_evaluation_dec11_16_1.pptx
- 1. 1. How to prepare Posters FALL 2017 GE105 Introduction to Engineering Design College of Engineering King Saud University Studio 10. 2. Concept Generation and Evaluation
- 2. 2 Guide for Poster Design • Size A0 (Portrait/Vertical) • Can use Microsoft PowerPoint to design it • ApplyThe 20-40-40 Rule • 20%Text • 40% Graphics • 40%White Space • Use Heavy lines for ease in viewing • Should be easy to read from more than one meter away
- 3. 3 Font Types, Use and Size Font Use Title Authors Affiliations Section Header Text Acknowledgments Suggested FontType: Tahoma Helvetica Palatino Arial Times New Roman* Font Size 96 pt 72 pt 36-48 pt 32 pt 24 pt 18 pt
- 4. 4 Poster Mandatory Contents Your poster should include: • A descriptive title • Overview of the design project • What? How? Why? • Primary and secondary objectives • Constraints and criteria • Human factors • Creative component • Generated concepts • Concept evaluation • Conclusions • Acknowledgements
- 5. Some Advice: •Photographs as backgrounds lose quality when enlarged (use 150-300 dpi resolution) •Dark backgrounds are easier on the eye but use more ink •Colored backgrounds can often break the monotony of white posters, thus attracting a viewer •Use light backgrounds with dark photos and vice versa •Neutral/gray backgrounds enhance color photos while white backgrounds reduce their impact. 5
- 7. END of part one ….next (concept generation and evaluation)
- 8. • A four-step process 1. list the functions and features required 2. Identify as many ways as possible for each feature or function 3. Draw a table with functions listed vertically and features or concepts listed horizontally 4. Identify all practical combinations Reminder: Morphological Analysis • The problem is divided into smaller sub-problems. • Concepts are generated to satisfy each smaller problem. 8
- 9. 9 Reminder: Morphological Analysis (Example) Design a means of transportation for disabled persons Feature Concept 1 Concept 2 Concept 3 Concept 4 Body Support armchair under arm leg support sofa Ground Support rollers tracks wheels skids Power Supply Battery solar human air Speed Control automatic manual on-off - Direction Control side thrust one side lock reverse Steering Design 1: Armchair + Rollers + Solar + Automatic + Side-thrust Design2: Armchair + Wheels + Human + Manual + Steering
- 10. 10 Problem solving 1 Customer Need 2 Define Problem 3 Search 4 Criteria and Constraints 5 Alternative Solutions 6 Analysis 7 Decision 8 Plan 9 Implement 10 Evaluate Reminder: Concept Evaluation • Characteristics of Engineering Decisions •Multiple criteria •Criteria are of different importance •Criteria are conflicting •Multiple interested parties • Use a Decision Matrix: A simple decision approach to weigh pros and cons applying weight and rate concept (multiply and sum)
- 11. Weights 11 Direct Energy Manufac turability Flexibility Holding Energy in Oven Total Weight Scenario 1: Compromise 25 25 25 25 100% Scenario 2: Most light in 40 5 15 40 100% Scenario 3: Easy to make 20 40 20 20 100% • To determine the importance of each attribute, we use a simple approach based on weights that sum to 100
- 12. Rating the Concepts 12 • This scenario uses weights (40,5,15,40)
- 13. Group Activity 13 • Part 1: 40minutes • Each group generates concepts for their final design project using morphological analysis • At least three alternatives must be generated • Part 2: 20minutes • Use the weight-and-rate to evaluate your concepts • Part 3: 15minutes • Present your work to the Instructor and your peers in class
Editor's Notes
- * Times New Roman is less and less become a favored font nowadays