The document describes the multi-step process involved in jewellery making, from design to marketing. Key steps include design and mould making, casting, polishing, embellishment, finishing, plating, quality checking, packaging, and marketing. The process requires advanced technology as well as skilled artisans and can take a long time to complete as each piece undergoes numerous procedures before becoming a finished product.

1. Story of a Jewel

2. Story of a Jewellery…
Jewellery is a form of
personal adornment such as
brooches, rings, necklaces,
earrings, and bracelets.
What is a jewellery…???
Charles Randimal

3. Story of a Jewellery…
- Most advance technologies and
dedicated research.
- Composite process undergoing a
long and slow procedure making it
tough from the initial point to the
concluding point.
- Each product undergoes a series of
procedures before we get the net
product as a beautiful jewellery
product.
Jewellery Making…
Charles Randimal

4. Story of a Jewellery…
Process of Jewellery Making.
Charles Randimal

5. Story of a Jewellery…
‐ The natural components of
jewellery will undergo multiple
processes.
‐ These jewelleries are unique
and involve a lot of time and
skill.
‐ Except for personalized
jewellery which are
Process of handcrafted, most of the
Jewellery Making… jewelleries are executed by
casting machines.
Charles Randimal

6. Story of a Jewellery…
- Starts off with a concept.
- Then it is converted in to a
design by the designers as a
rough sketch.
- The final design is a result of
close cooperation between
designer and craftsman.
- The designer’s concept and
drawings are used by the
Model maker to create the
original piece of Jewellery.
Design Making…
Charles Randimal

7. Story of a Jewellery…
‐ High technology mould once
the master piece is complete
‐ Wax reproductions of the
Jewellery.
‐ Delivering the complete design
sketch to the moulding
section.
‐ Moulders then turns the sketch
into a master mould.
Moulding …
Thilan Liyanage

8. Story of a Jewellery…
- The wax replicas are placed in
steel containers which are then
occupied with investment
powder.
- then containers are heated in a
chamber to 550°C which
solidifies the powder and melts
the wax leaving behind a
perfect effect.
- Then the Liquefied metal is
poured into the flasks, allowed
Casting … to cool, then demolished to
reveal the jewellery in casting
form. Thilan Liyanage

9. Story of a Jewellery…
- Every part must be polished
while the mount is being made.
- The entire mount is carefully
made clean and polished to a
highest degree of smoothness
- All tinctures of the polishing
compounds and 'rouge' must
be meticulously got rid of
either by careful washing by
hand, or by use of supersonic
cleaning baths.
Polishing…
Kiruba Kandasamy

10. Story of a Jewellery…
• Decorative stones of the
correct sizes and weight are
cut and made with extreme
preciseness and are then
assorted for the final setting.
• It requires immense patience
and skill to make the master-
model and to produce an
exquisitely casting free from
defects.
Embellishments or
Decorative processes…
Kiruba Kandasamy

11. Story of a Jewellery…
- Once the casting process is
over the caster products will be
delivered to the relevant
department
- Then they will pay attention
for bringing smooth and
softness on products.
- These casting products are
going into hand finished.
Finishing …
Shalini Theivendram

12. Story of a Jewellery…
- Many techniques have been
made in plating, in the jewellery
trade.
- Most plating is done by
electro- deposition.
- Then channelizing the plating
metal from the piece of pure
metal.
- An attention must be paid to
Plating … fabricating and polishing
procedures.
Shalini Theivendram

13. Story of a Jewellery…
• The product is brought to the
checking department where
each and every piece is
checked with excessive
attention and thoroughly
checked for any defects.
• This process of quality
checking is done by very
experienced workers and all
the defected pieces are
sending back to the respective
departments.
Quality Checking …
Thushan Dharmawardana

14. Story of a Jewellery…
‐ At the end it is forwarded for
final packaging and labelling.
‐ Extensively packed to avoid
damages
‐ Only few middleman’s involve
in business.
‐ Multi model inbound and
outbound logistic systems are
utilized. But not in a larger
scale by any means.
Transporting
and packaging...
Thushan Dharmawardana

15. Story of a Jewellery…
‐ In Jewellery industry women
are used mostly as a marketing
tool which lures customers to
purchase jewellery items.
‐ The designs are displayed
basically on every kind of
media available. Retailer shop
holders are also persisting on a
better customer care service
which would magnetize
Marketing … customers to their respective
shops.
Thushan Dharmawardana

16. Story of a Jewellery…
Process of Jewellery Making.

17. Story of a Jewellery…
THANK YOU…!!!
‐ Thushan Dharmawardana
‐ Charles Randimal
‐ Thilan Liyanage
‐ Kiruba Kandasamy
‐ Shalini Theivendram Ref : http://www.fashion-jewelry-manufacturers.com/process.html