The document provides information on lighting equipment available in a performance hall. Spare lights, safety chains, G-clamps, barn doors, gel holders, gobos, and iris can all be found at the back of the hall. Instructions are given on how to hang lights from rigs, add safety chains, isolate light directions using barn doors or shutters, add color using gel holders, create patterns with gobos, and reduce beam angles with iris.

2. G-clamp v
Gel
Gel Frame
Barn Doors
 all spare lights can be found at the back of the hall.
If hanging the light from the rig or a boom the CCT must have a safety chain, additional
chains are situated at the back of the hall.
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of
the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.

3. G-clamp v
Gel v
Gel Frame
Barn Doors v
all spare lights can be found at the back of the hall.
.
If hanging the light from the rig or a boom the PC must have a safety chain, additional
chains are situated at the back of the hall.
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of
the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.
If using colour you will also require a gel holder which are hung on the wall above the
lighting rack. Make sure your gel holder is the correct size for the chosen light
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.

4. G-clamp v
Gel v
Gel Frame
all spare lights can be found at the back of the hall.
Barn Doors v
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of
the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.
If using colour you will also require a gel holder which are hung on the wall above the
lighting rack. Make sure your gel holder is the correct size for the chosen light
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.

5. G-clamp v
Gel v
Gel Frame
all spare lights can be found at the back of the hall.
Barn Doors v
If hanging the light from the rig or a boom the CCT must have a safety chain, additional
chains are situated at the back of the hall.
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of
the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.
If using colour you will also require a gel holder which are hung on the wall above the
lighting rack. Make sure your gel holder is the correct size for the chosen light
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.

6. G-clamp v Gel v Gel Frame
Barn Doors v
gobo v gobo holder v
all spare lights can be found at the back of the hall.
If hanging the light from the rig or a boom the CCT must have a safety chain, additional chains are situated at the
back of the hall.
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above the lighting rack at the
back of the hall.
If using colour you will also require a gel holder which are hung on the wall above the lighting rack. Make sure
your gel holder is the correct size for the chosen light
If you need to isolate the light direction use shutters which are permanently attached to light.
If you need to create a pattern use gobos which are located in julies office, you will also need gobo holders.
If you want to reduce a beam angle use the iris’ situated at the back of the hall.

7. G-clamp v
Gel v
Gel Frame
all spare lights can be found at the back of the hall.
Barn Doors v
If hanging the light from the rig attach a G-clamp, additional G-clamps are situated of
the hall on the lighting rack.
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.
If using colour you will also require a gel holder which are hung on the wall above the
lighting rack. Make sure your gel holder is the correct size for the chosen light
If you need to isolate the light direction you need barn doors. These can be found above
the lighting rack at the back of the hall.