This document describes the features of a Clean Room Product including supporting up to 2-3 doors, using a 16x2 alphanumeric LCD display on each door to show operational and fault messages. Additional features include isolated door displays, UV light hour meters, user-programmability with passwords, door status LEDs if the display fails, various system timers, feedback from magnetic locks, easy installation and a soft-touch keypad. It also mentions compatibility with building management systems.

1. Clean Room Product

3. Features :
 Advanced Micro controller based.
 Support maximum nos. of 2 or 3 doors.
 16x2 Alphanumerical LCD Display on every
door.
 Operational & faults massages on the every
doors.

4. Features :
 Door LCD display are isolated from main
system.
 Inbuilt UV Hour meter with Hour timer Reset
Option.
 UV Light expiry life alert massage on LCD with
buzzer output.
 User programmable system with password
protected.

5. Features :
 In case of LCD display failure door status
indication by on door.
 Red/Green LED.
 Various system process timer available like
Door Lock, blower
 ON and buzzer mute time

6. Features :
 Facility available to read feed back from
magnetic lock.
 Easy to installation & user friendly wiring.
 Soft touch membrane keypad with various fault
alert buzzer.
 Building Management System (B.M.S.)
compatibility