Module to assist pedestrians to cross their way

1. 9/16/2015SPIKE WARNER 1
Presented By,
S.Meiyappan (12BIT2044),
M.Kumarasamy College of Engineering,
Karur – 639 113.

2. • “SPIKE WARNER” is a tool to help the people
(particularly pedestrians) to cross their path as the vehicles
are parked over the limit (on the zebra cross).
• For pedestrians the application is accessed through the
transformers, relay switches, capacitors, resistors, sensors
and motors.
• When the signal turns red the spike which is grounded
automatically rises its level .
9/16/2015SPIKE WARNER 2

3. 9/16/2015SPIKE WARNER 3
•The rise in the level of spike will be a warning to the
driver so that he/she stops the vehicle in the limit
specified.
•As a result the pedestrians can cross their way easily
without any trouble.
•In case if the vehicles try to cross the limit specified the
spike will puncture the tyres of the vehicle.

4. • To help pedestrians cross their way without any problem
by the vehicles.
• Vehicles are parked on the zebra cross.
• We use spikes as a warning to the vehicles.
• Tyres are punctured if they cross their limit.
9/16/2015SPIKE WARNER 4

5. 9/16/2015SPIKE WARNER 5
•Scope of the project is to change the Improper into
Proper with the help of Assistive Technology.
•Our implementation has a wide scope in the level
crossing where the pedestrians are taken care.

6. 9/16/2015SPIKE WARNER 6
•Vehicles are parked on the zebra lines.

7. • Since vehicles are parked on the zebra cross it is
difficult for the pedestrians.
• There are chances for accidents.
• Congestion is the major issue.
9/16/2015SPIKE WARNER 7

8. 9/16/2015SPIKE WARNER 8
• To keep spikes so that vehicles are parked on their limits.
• Car A stands in the actual limit.

9. • Warning is given to the drivers.
• Vehicles are parked on their limits.
• Else the tyre’s will be punctured.
• Pedestrians can cross their way without any trouble.
9/16/2015SPIKE WARNER 9

10. 9/16/2015SPIKE WARNER 10
Hardware's:
•Capacitor
•Step down Transformer
•Motor
•Switch
•Resistor
•Transistor

11. 9/16/2015SPIKE WARNER 11

12. 9/16/2015SPIKE WARNER 12
•The 200v power supply is reduced to 20v using Step
down transformer.
•The power supply is stored using capacitor.
•Resistor is used to resist the flow of current when its
limit exceeds.
•The signal is sensed by the sensor and the relay
switch decides the operation.
•The operation may be Spike movement or Static
spike in its original state.

13. • A problem that can be addressed by the
use of Spike Warner.
9/16/2015SPIKE WARNER 13

14. 9/16/2015SPIKE WARNER 14
•The current application is developed for the pedestrians
and if the application is executed in an unmanned railway
gate, it will be more helpful.
•The future scope will also cover people who are suffering
in level crossing.

15. 9/16/2015SPIKE WARNER 15
•With the implementation of the above mentioned
modules we can help the pedestrians and we can easily
reduce the congestion in traffic.

16. 9/16/2015SPIKE WARNER 16
[1] Shilpa S. Chavan(Walke), Dr. R. S. Deshpande, J. G.
Rana (2009) “Design of Intelligent Traffic Light Controller
using Embedded System”, Second International Conference
on emerging trends in Engineering and Technology.
[2] Cai Bai-gen, ShangGuan Wei, Wang Jian & Chen Rui
(2009) “The Research and Realization of Vehicle Detection
System Based on Wireless Magneto-resistive Sensor”,
Second International Conference on Intelligent Computation
Technology and Automation.

17. 9/16/2015SPIKE WARNER 17