SME Chapter 248 and the SME Machining/Material Removal makes a series of Gemba factory floor videos of machining operations at this Spokane WA machine shop
Turbo abrasive machining tech paper - 2016Dave Davidson
INTRODUCTION: Turbo-Finish technology (also referred to as Turbo-Abrasive Machining) is a dry, high-speed spindle finishing process that utilizes abrasive fluidized bed technology, and high speed part rotation to develop extremely rapid and uniform edge and surface conditioning on aerospace, automotive and industrial parts. Polishing, deburring and edge radiusing are accomplished anywhere that the media can access. This finishing technology can develop isotropic surface finishes s while developing consistent round edges on any exposed sharp edged features.
Attracting Manufacturing Talent: How the Dream It. Do It. Recruitment Strateg...360mnbsu
In Minnesota, only 2 percent of high school students express an interest in manufacturing careers while Minnesota manufacturing businesses post 27,000 manufacturing job openings every four months. This presentation showed how the nationally organized Dream It. Do It. recruitment strategy is being utilized in Minnesota by 360, a manufacturing-based center of excellence. Strategies and resources will be described and shared to help others consider how they present manufacturing as a career of choice. Best practices from across the national Dream It. Do It. network were also shared.
Presented by Jaimee Meyer, Dream It. Do It. MN Executive Director and Jessica Gehrke, 360 Communications Specialist at the 2015 HI-TEC Conference in Portland, OR
Turbo abrasive machining tech paper - 2016Dave Davidson
INTRODUCTION: Turbo-Finish technology (also referred to as Turbo-Abrasive Machining) is a dry, high-speed spindle finishing process that utilizes abrasive fluidized bed technology, and high speed part rotation to develop extremely rapid and uniform edge and surface conditioning on aerospace, automotive and industrial parts. Polishing, deburring and edge radiusing are accomplished anywhere that the media can access. This finishing technology can develop isotropic surface finishes s while developing consistent round edges on any exposed sharp edged features.
Attracting Manufacturing Talent: How the Dream It. Do It. Recruitment Strateg...360mnbsu
In Minnesota, only 2 percent of high school students express an interest in manufacturing careers while Minnesota manufacturing businesses post 27,000 manufacturing job openings every four months. This presentation showed how the nationally organized Dream It. Do It. recruitment strategy is being utilized in Minnesota by 360, a manufacturing-based center of excellence. Strategies and resources will be described and shared to help others consider how they present manufacturing as a career of choice. Best practices from across the national Dream It. Do It. network were also shared.
Presented by Jaimee Meyer, Dream It. Do It. MN Executive Director and Jessica Gehrke, 360 Communications Specialist at the 2015 HI-TEC Conference in Portland, OR
An overview of the mission and vision of the 360 Center of Excellence, a manufacturing-based center.
From the 2014 Taking Shape Summit: The Internet of Things & the Future of Manufacturing.
Sean Campbell, Principal, Cascade Insights, Discusses Competitive Intelligence Frameworks For Deciphering Changing Market Forces And Customer Needs
Sean says, "Regularly, Scott Swigart and I discuss pertinent issues on the CI Life podcast. I'm looking forward to joining the Global Product Management Talk format and socratic twitter chat - a novel approach for talking about these frameworks with tweets and blogtalkradio community."
Background resources: http://bit.ly/128fhQp
Listen! http://bit.ly/Z0h0sg
Mark your calendar with the correct time: http://bit.ly/UBVUKi
Follow for reminders: http://bit.ly/nbw9Yr
Curated Content: http://bit.ly/xHe37N
Participate! http://bit.ly/eC3D09
What is #ProdMgmtTalk? http://bit.ly/AlLEbN
Join Global Product Management Talk! http://linkd.in/jRmwRx
As a top 10 business podcast on the BlogTalkRadio network, we receive >18,000 listens per week! Imagine your brand engaged with our audience for over 50 minutes on their personal devices! Sponsor us: http://bit.ly/gF0Tt3
Startup Product Summit
Discover how to work together to develop amazing products.
February 7, 2013, San Francisco
startupproduct.com
Registration is now open!
startupproduct.ticketbud.com/summit
Become a Product Leader!
2 Day Intensive: Product Innovation Leadership
February 5 & 6, San Francisco
http://www.aipmm.com/html/certification/strategic-innovation.php
This webinar was hosted by Ignyte Assurance Platform and MAGNET: The Manufacturing Advocacy and Growth Network.
Recorded on 15 June 2021, it was designed for small and medium businesses struggling with the copious amount of required cybersecurity regulations, where we’ll cover these questions and more such as:
How to protect your assets from cyber threats and attacks
Guidance on the latest and necessary cybersecurity requirements and legislations
Find out what your business needs to comply with and what it takes to get there in the shortest possible time
Learn what’s the most efficient way to maximize your efforts and resources in cybersecurity
The Association Of International Product Marketing and Management (AIPMM) Announces Sponsorship of Rocky Mountain Product Camp And Special Attendee Discounts For Certified Innovation Leader (CIL) Virtual Online Study Group Program
Technology is nothing but science with human attributes. It can do nothing less than magic. The advanced tech is not only revolutionizing each and every element of our lives, but is making the society a better place to live. The latest technological achievements have triggered unexpected trends with broader impact on very business and human aspect. And in 2019, we expect drastic exponential changes in every possible direction. Advanced tech like AI will transform the entire industries, making way for infinite business opportunities.
Jason Chicola, Founder And CEO Of Rev.com Will Discuss Megatrends Of Remote Work, Labor Marketplaces Vs Crowdsourcing, And The Role Of Technology In Freelance Work
Businesses have a tough time interacting with people who are overseas and in different time zones. There is also the hassle involved with having to select the best workers from a large pool of possible freelancers, leaving business customers unsure of what the final results will be.
Jason Chicola, Founder And CEO Of Rev.com will join host, Cindy F. Solomon, on Monday, May 20, 2013 at the simultaneous times of 10:00 AM Pacific Time, 11:00 AM MST Denver, 12:00 Noon CST Chicago, and 1:00 PM EST Boston.
Listen! http://bit.ly/19mmcpM
Participants are welcome to listen live at http://www.blogtalkradio.com/prodmgmttalk, call in to talk on the show (323) 927-2957 and to participate on Twitter by following @ProdMgmtTalk and tweeting using the hashtag #ProdMgmttalk
Jason says, "Happy to join the Global Product Management Talk community to talk about how technology has impacted the labor marketplaces and freelance workers, as well as how product management has changed over the past decade."
----------------------------------------------------------------------------------------
NOTE: DAY & TIME
Monday, May 20, 2013 at the simultaneous times of 10:00 AM Pacific Time, 11:00 AM MST Denver, 12:00 Noon CST Chicago, and 1:00 PM EST Boston.
----------------------------------------------------------------------------------------
Listen! http://bit.ly/19mmcpM
Background resources: http://bit.ly/10EoRHj
Mark your calendar with the correct time: http://bit.ly/101VtuG
Follow for reminders: http://bit.ly/nbw9Yr
Curated Content: http://bit.ly/TV4Dsp
Participate! http://bit.ly/eC3D09
Survey: http://bit.ly/XejfWi
What is #ProdMgmtTalk? http://bit.ly/AlLEbN
Join Global Product Management Talk! http://linkd.in/jRmwRx
Never participated in a twitter chat? FAQs http://t.co/Qr2s1o0O
Learn How to participate in Socratic Twitter Talk via Global Prod Mgmt Talkhttp://t.co/nV2DZflo
Learn about Tweeting Best Practices and Twitter Talk FAQshttp://t.co/8WzU7LSf
Want to reach target audience of Product Professionals? Sponsor Global Product Management Talk! http://bit.ly/gF0Tt3
Join us at http://tweetchat.com/room/prodmgmttalk automatically appends hashtag
Our format: we post questions Q1, Q2, Q3 Please answer using A1, A2, A3
Questions for Discussion:
PreQ: Please introduce yourself, where you are tweeting from & your involvement with #prodmgmt #prodmgmttalk
Q1 Describe the evolution of the remote work industry.
Q2 How is Rev different from other labor marketplaces?
Q3 Which companies have executed well?
Q4 How do you include workers in your product development?
Q5 How important are your customers to informing the product roadmap?
Q6 How has product management changed over the past decade?
--------------------------------------
Technology and business both have the golden touch; they just don’t change into gold whatever they touch but something more valuable than gold. They are revolutionizing each and every element of our lives. The latest technological and business achievements have triggered unexpected trends with broader impact on very human aspect. And in 2019, we expect drastic exponential changes in every possible direction. Advanced tech like AI will transform the entire industries, making way for infinite business opportunities.
In this latest edition, we will focus on such future thinking companies and their revolutionizing services that are changing the face of business sector.
The Silicon Review “Super 30 Companies of the Year 2019.” These companies are not only distinctly ahead among the peers, but are helping other companies to gain momentum along with them. The companies that are enlisted provide most innovative solutions to solve IT industry’s toughest challenges and distinguish themselves by their ability to forecast future business and technology trends. In simple words, these companies are helping the people better understand the world.
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
An overview of the mission and vision of the 360 Center of Excellence, a manufacturing-based center.
From the 2014 Taking Shape Summit: The Internet of Things & the Future of Manufacturing.
Sean Campbell, Principal, Cascade Insights, Discusses Competitive Intelligence Frameworks For Deciphering Changing Market Forces And Customer Needs
Sean says, "Regularly, Scott Swigart and I discuss pertinent issues on the CI Life podcast. I'm looking forward to joining the Global Product Management Talk format and socratic twitter chat - a novel approach for talking about these frameworks with tweets and blogtalkradio community."
Background resources: http://bit.ly/128fhQp
Listen! http://bit.ly/Z0h0sg
Mark your calendar with the correct time: http://bit.ly/UBVUKi
Follow for reminders: http://bit.ly/nbw9Yr
Curated Content: http://bit.ly/xHe37N
Participate! http://bit.ly/eC3D09
What is #ProdMgmtTalk? http://bit.ly/AlLEbN
Join Global Product Management Talk! http://linkd.in/jRmwRx
As a top 10 business podcast on the BlogTalkRadio network, we receive >18,000 listens per week! Imagine your brand engaged with our audience for over 50 minutes on their personal devices! Sponsor us: http://bit.ly/gF0Tt3
Startup Product Summit
Discover how to work together to develop amazing products.
February 7, 2013, San Francisco
startupproduct.com
Registration is now open!
startupproduct.ticketbud.com/summit
Become a Product Leader!
2 Day Intensive: Product Innovation Leadership
February 5 & 6, San Francisco
http://www.aipmm.com/html/certification/strategic-innovation.php
This webinar was hosted by Ignyte Assurance Platform and MAGNET: The Manufacturing Advocacy and Growth Network.
Recorded on 15 June 2021, it was designed for small and medium businesses struggling with the copious amount of required cybersecurity regulations, where we’ll cover these questions and more such as:
How to protect your assets from cyber threats and attacks
Guidance on the latest and necessary cybersecurity requirements and legislations
Find out what your business needs to comply with and what it takes to get there in the shortest possible time
Learn what’s the most efficient way to maximize your efforts and resources in cybersecurity
The Association Of International Product Marketing and Management (AIPMM) Announces Sponsorship of Rocky Mountain Product Camp And Special Attendee Discounts For Certified Innovation Leader (CIL) Virtual Online Study Group Program
Technology is nothing but science with human attributes. It can do nothing less than magic. The advanced tech is not only revolutionizing each and every element of our lives, but is making the society a better place to live. The latest technological achievements have triggered unexpected trends with broader impact on very business and human aspect. And in 2019, we expect drastic exponential changes in every possible direction. Advanced tech like AI will transform the entire industries, making way for infinite business opportunities.
Jason Chicola, Founder And CEO Of Rev.com Will Discuss Megatrends Of Remote Work, Labor Marketplaces Vs Crowdsourcing, And The Role Of Technology In Freelance Work
Businesses have a tough time interacting with people who are overseas and in different time zones. There is also the hassle involved with having to select the best workers from a large pool of possible freelancers, leaving business customers unsure of what the final results will be.
Jason Chicola, Founder And CEO Of Rev.com will join host, Cindy F. Solomon, on Monday, May 20, 2013 at the simultaneous times of 10:00 AM Pacific Time, 11:00 AM MST Denver, 12:00 Noon CST Chicago, and 1:00 PM EST Boston.
Listen! http://bit.ly/19mmcpM
Participants are welcome to listen live at http://www.blogtalkradio.com/prodmgmttalk, call in to talk on the show (323) 927-2957 and to participate on Twitter by following @ProdMgmtTalk and tweeting using the hashtag #ProdMgmttalk
Jason says, "Happy to join the Global Product Management Talk community to talk about how technology has impacted the labor marketplaces and freelance workers, as well as how product management has changed over the past decade."
----------------------------------------------------------------------------------------
NOTE: DAY & TIME
Monday, May 20, 2013 at the simultaneous times of 10:00 AM Pacific Time, 11:00 AM MST Denver, 12:00 Noon CST Chicago, and 1:00 PM EST Boston.
----------------------------------------------------------------------------------------
Listen! http://bit.ly/19mmcpM
Background resources: http://bit.ly/10EoRHj
Mark your calendar with the correct time: http://bit.ly/101VtuG
Follow for reminders: http://bit.ly/nbw9Yr
Curated Content: http://bit.ly/TV4Dsp
Participate! http://bit.ly/eC3D09
Survey: http://bit.ly/XejfWi
What is #ProdMgmtTalk? http://bit.ly/AlLEbN
Join Global Product Management Talk! http://linkd.in/jRmwRx
Never participated in a twitter chat? FAQs http://t.co/Qr2s1o0O
Learn How to participate in Socratic Twitter Talk via Global Prod Mgmt Talkhttp://t.co/nV2DZflo
Learn about Tweeting Best Practices and Twitter Talk FAQshttp://t.co/8WzU7LSf
Want to reach target audience of Product Professionals? Sponsor Global Product Management Talk! http://bit.ly/gF0Tt3
Join us at http://tweetchat.com/room/prodmgmttalk automatically appends hashtag
Our format: we post questions Q1, Q2, Q3 Please answer using A1, A2, A3
Questions for Discussion:
PreQ: Please introduce yourself, where you are tweeting from & your involvement with #prodmgmt #prodmgmttalk
Q1 Describe the evolution of the remote work industry.
Q2 How is Rev different from other labor marketplaces?
Q3 Which companies have executed well?
Q4 How do you include workers in your product development?
Q5 How important are your customers to informing the product roadmap?
Q6 How has product management changed over the past decade?
--------------------------------------
Technology and business both have the golden touch; they just don’t change into gold whatever they touch but something more valuable than gold. They are revolutionizing each and every element of our lives. The latest technological and business achievements have triggered unexpected trends with broader impact on very human aspect. And in 2019, we expect drastic exponential changes in every possible direction. Advanced tech like AI will transform the entire industries, making way for infinite business opportunities.
In this latest edition, we will focus on such future thinking companies and their revolutionizing services that are changing the face of business sector.
The Silicon Review “Super 30 Companies of the Year 2019.” These companies are not only distinctly ahead among the peers, but are helping other companies to gain momentum along with them. The companies that are enlisted provide most innovative solutions to solve IT industry’s toughest challenges and distinguish themselves by their ability to forecast future business and technology trends. In simple words, these companies are helping the people better understand the world.
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshaftsDave Davidson
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...Dave Davidson
This high-speed, high-intensity mass finishing
method can improve part performance. Centrifugal iso-finishing can be used not only for deburring and edge-contour, but also to
develop surface finish attributes that improve the performance,
surface integrity and service life of components.
A High-Speed, High-Energy Alternative
Centrifugal iso-finishing is a high-speed and high-intensity
mass finishing method in which abrasive or polishing materials are caused to interact with part edges and surfaces
with 10 times the surface pressure of low-energy finishing
methods. What this means, in practical terms, is that it is
possible to produce very refined surface finishes in abbreviated process cycle times. It also means that parts with
complex and detailed geometries can be deburred with a
minimum of manual intervention.
Iso-Finishing sample part finishing application formDave Davidson
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance infoDave Davidson
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.Dave Davidson
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing SystemsDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHINGDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishingDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured PartsDave Davidson
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processingDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing contract services Dave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - part dividersDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processesDave Davidson
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment descriptionDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Epistemic Interaction - tuning interfaces to provide information for AI support
Sme 248 makes a video in spokane
1. SME MANUFACTURING, SPOKANE, WASHINGTON CHAPTER 248
November 15, 2013
Professional Networking for
Manufacturing, Engineering,
Production, Business and
Lean Leaders...
Listen to John A. Dunlop, Program manager at KeytronicsEMS
"Spokane's SME organization is exceptional. The leadership is dedicated
to the cause and past leaders remain
involved to ensure that the contacts
and traditions of the organization continue. Traditions include nearly monthly
tours of local manufacturing companies
to learn best in class production and
Lean techniques. The group also spon(Spokane, WA) Behind the scenes — SME248 Volunteers shoot factory floor “gemba” style educational videos at the MacKay Manu- sors a student paper night that offers
facturing in Spokane, WA. On September 25, SME volunteer members did a video shoot at MacKay Manufacturing located in Spoboth contacts and awards. This is certainly the premier manufacturing and
kane Washington. Participating were Katie MacKay Vice President and Greg Meyer CNC Supervisor, Glenn Coker, CNC Machinist
engineering organization in Spokane."
Bruce Felt from Video Marketing Services, Terrence Geyer, the 2012 SME Chapter 248 chair from the Mechanical Engineering Dept.
at Eastern Washington University and Dave Davidson from SME's Deburring and Finishing Tech Group and its Machining/Metal Remov- —- Membership in SME is open to
business professionals interested in
al Technical Community. The resulting educational videos can be seen on YOUTUBE… The video subjects include “Lean at Macmanufacturing or lean. To apply for
Kay”, “Centrifugal Barrel Finishing”, “MacKay operations with a Mori Seiki NTX1000SZM (11 axis) Turn-Mill Center” and “MacKay
SME go here:
Operations with a Willimen 408MT (7 axis) All of these videos can be seen on the i.sme.org site at: i.sme.org/c248/contactvideos http://www.slideshare.net/dryfinish/
fillintheform-and-return, SEE ALSO:
www.sme248.org
MacKay Manufacturing is a precision
machine shop and contract manufacturer that makes specialized medical
devices and surgical instruments.
They make a wide range of products
for endoscopic, arthroscopic, orthopedic and surgical implant applications
SME Manufacturing promotes manufacturing education and advances manufacturing awareness for the Inland Northwest Empire area. The
Society of Manufacturing Engineers is the world's leading professional society advancing manufacturing knowledge and influencing more
than half a million manufacturing practitioners annually. Through its local chapters, technical communities, publications, expositions and
professional development resources, SME promotes an increased awareness of manufacturing engineering and keeps manufacturing professionals up to date on leading trends and technologies. Headquartered in Michigan, the Society has members in more than 70 countries and
represents manufacturing practitioners across all industries... TO BECOME A MEMBER, DOWNLOAD THE APPLICATION FROM HERE: http://
www.slideshare.net/dryfinish/fillintheform-and-return (Fill in the form on screen, Print it, sign it and fax it) For further information see
also: www.sme248.org
Bruce Felt from Video Marketing
Services and SME248 talks to MacKay’s Gregg Meyer and Katie MacKay about the video production
Katie MacKay, Executive Vice President at
MacKay Manufacturing provided the narration
for the videos on “Centrifugal Barrel Finishing”
and the “MacKay Lean story”. Unlike other
manufacturing education videos, the videos in
this MMR Gemba Series are are made on real
factory floors with real factory people.
Also aerospace, avionics, electronics
Editorial and pictorial by Dave Davidson