This document provides information about Slot Drain, a linear drain system that serves as an alternative to trench drains. It describes Slot Drain's benefits such as being easy to clean without grates, sanitary as it does not absorb contaminants, safe as it avoids tripping hazards from grates, and durable since only the surface is exposed. The document outlines Slot Drain's applications in facilities like food processing plants, and provides engineering specifications for stainless steel, galvanized steel, and fiberglass body materials. Contact information is provided at the end.
Learn how the TDW SmartPlug® can help eliminate expense associated with de-commissioning a line. Did you know that in some cases production can even continue when using the SmartPlug® Isolation Technology?
The JetStream RFID circulation sub provides operators with increased drilling efficiency and flexibility through its three activation positions, ability to perform multiple operations in a single trip, and unlimited activations without tripping out of the hole. It boosts annular velocity for wellbore cleanup, precisely spots lost circulation materials and kill-weight fluids, and jets blowout preventers. The sub uses RFID technology rather than mechanical actuation for unlimited selective activations downhole.
Prevent the formation of lug wear. Lug wear leads to equipment
breakdown, which results in downtime, production shortfalls and in the worst case scenario, injury. Construction, mining and forestry companies across the globe need a solution that permanently eliminates lug wear and empowers them to meet the challenges of everyday industrial operations. Expander System is on a mission to reset the limits of industrial operations.
Mechanical Seal Design For Differential Pressure Applicationssapparts
Mechanical Face Seal offered by SAP Parts for differential pressure applications simulate the application conditions of TBM drum cutters and cutter rollers in demanding test cycles with increased ramp and ramp down cycles on the test bench of the tensile test center and controlled by the computer system Is fully controlled by the pre-test and verification system.
Read more: http://www.sapparts.com/mechanical-face-seal.html
Floating seals are seals used for rotating bodies exposed to silt and sand. SAP Parts is one of the leading manufacturers and exporters of Duo Corn Seals, floating seals from India, Germany and USA. We have been working with major OEM and international companies since 2009.
Visit: http://www.sapparts.com/
Specifying a new flooring surface can be a real headache for facilities managersFlowcrete Group Ltd
Flowcrete know that facilities managers understand that no other surface in the building gets as much use as the floor.
An informed and prudent choice at design stage is critical to preventing tragic results.
Here, Flowcrete highlight key considerations when specifying, replacing or repairing floor finishes in various facilities.
Taking the Headache out of Flooring Specification for Facilities ManagersFlowcrete Group Ltd
Facilities managers play an important role within both commercial and industrial organisations as well as the constant challenges that they face handling the day-to-day operational demands of multi-purpose, multi-unit buildings. Read Flowcrete's eBook which addresses a variety of considerations throughout the floor specification process.
Leading manufacturer designer and supplier of toric sealssapparts
Toric Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications.
Learn how the TDW SmartPlug® can help eliminate expense associated with de-commissioning a line. Did you know that in some cases production can even continue when using the SmartPlug® Isolation Technology?
The JetStream RFID circulation sub provides operators with increased drilling efficiency and flexibility through its three activation positions, ability to perform multiple operations in a single trip, and unlimited activations without tripping out of the hole. It boosts annular velocity for wellbore cleanup, precisely spots lost circulation materials and kill-weight fluids, and jets blowout preventers. The sub uses RFID technology rather than mechanical actuation for unlimited selective activations downhole.
Prevent the formation of lug wear. Lug wear leads to equipment
breakdown, which results in downtime, production shortfalls and in the worst case scenario, injury. Construction, mining and forestry companies across the globe need a solution that permanently eliminates lug wear and empowers them to meet the challenges of everyday industrial operations. Expander System is on a mission to reset the limits of industrial operations.
Mechanical Seal Design For Differential Pressure Applicationssapparts
Mechanical Face Seal offered by SAP Parts for differential pressure applications simulate the application conditions of TBM drum cutters and cutter rollers in demanding test cycles with increased ramp and ramp down cycles on the test bench of the tensile test center and controlled by the computer system Is fully controlled by the pre-test and verification system.
Read more: http://www.sapparts.com/mechanical-face-seal.html
Floating seals are seals used for rotating bodies exposed to silt and sand. SAP Parts is one of the leading manufacturers and exporters of Duo Corn Seals, floating seals from India, Germany and USA. We have been working with major OEM and international companies since 2009.
Visit: http://www.sapparts.com/
Specifying a new flooring surface can be a real headache for facilities managersFlowcrete Group Ltd
Flowcrete know that facilities managers understand that no other surface in the building gets as much use as the floor.
An informed and prudent choice at design stage is critical to preventing tragic results.
Here, Flowcrete highlight key considerations when specifying, replacing or repairing floor finishes in various facilities.
Taking the Headache out of Flooring Specification for Facilities ManagersFlowcrete Group Ltd
Facilities managers play an important role within both commercial and industrial organisations as well as the constant challenges that they face handling the day-to-day operational demands of multi-purpose, multi-unit buildings. Read Flowcrete's eBook which addresses a variety of considerations throughout the floor specification process.
Leading manufacturer designer and supplier of toric sealssapparts
Toric Seals Developed for protection of equipment in the most adverse conditions.SAP Parts seals are hard at work with OEM's all over the world. Mechanical Face Seal -Also known as Heavy Duty Seal,Face Seal,Lifetime Seal, Floating Seal,Duo Cone Seal. Specifically engineered for rotating applications.
HVL Solutions provides cost-effective solutions for valve and pipeline problems in various industries. They offer a range of services to support maintenance, assessment, and repair of oil, gas, and water networks. This includes valve release techniques, refurbishment, packing, bursting and leak repairs, gearbox repairs, penstock repairs, repair collars, cutting pipes, hot tapping, camera inspections, valve flushing and greasing, excavations, and other civil engineering services. Their goal is to help maintain network capacity, efficiency, and service through innovative solutions.
The document discusses the importance of proper valve maintenance for pipeline safety and the environment. It introduces the SafeSeal360 valve greasing system, which helps ensure critical valves are properly lubricated and sealed. The system attaches to valves, uses high pressure to distribute grease evenly around the valve in 360 degrees, and can be operated remotely. This extends valve life and reduces costs of replacement or repairs from leakage. The system is ideal for valves in remote or environmentally sensitive areas.
This document discusses the importance of proper valve maintenance for pipeline safety and the environment. It introduces the SafeSeal360 valve greasing system, which helps ensure critical valves are properly lubricated to maintain integrity. The system reduces valve failure risks and costs compared to replacement. It can be mounted near valves and greased remotely or on-site, extending valve life and reducing leakage and maintenance needs.
The document describes the Ultracept Oil/Water Separation System produced by Jay R. Smith Mfg Co. The system is an above-ground unit that uses a proprietary multi-stage separation process to continuously skim even slight layers of oil from wastewater without the use of coalescing packs or filters. This allows the system to efficiently remove oil and sediment to very low PPM levels. The system also uses a continuous skimming design to ensure negligible water content in the collected waste oil.
Calumex Qxp is an expansive agent designed to be added to ordinary cement to compensate for drying shrinkage in concrete and mortar. It causes expansion within the first 7 days that counters drying shrinkage effects. Using it allows for fewer expansion joints in structures like pre-stressed concrete and industrial floors. It also reduces porosity and makes the concrete matrix denser and more waterproof. The normal addition rate is 4-7% replacement of cement by weight and thorough pre-blending is recommended.
The document describes a new line of spray dry nozzles from Spray Nozzle Engineering. The nozzles feature improved hygiene, easier cleaning and changeouts, longer component life, full axial sealing for leakage control, and FEA design for pressure compliance. Key technologies include concentric clasp alignment for wear parts, seal-in-disc orifice discs, compact hi-flo swirl design, optional drip-pro anti-drip valves, and new check valve sealing face systems. The nozzles are available in push-fit and threaded models with various options to suit different applications and budgets.
SDS drill bits are designed specifically for SDS drills and are held securely in place via grooves in the bit that interact with the drill chuck. The type of SDS drill determines which size bit shank can be used. SDS drill bits hammer within the chuck itself, delivering more power than regular hammer drills where the entire chuck moves. Proper sizing of both the drill bit shank diameter and body diameter are important for optimal performance. Different SDS drill bit types include regular SDS, SDS Plus, SDS-top, and SDS Max, each compatible with specifically sized drills.
Rando HD hydraulic fluids are designed to provide highly durable system protection and maximize equipment protection under severe conditions. They contain advanced additive technologies that deliver excellent anti-wear protection, thermal stability, and water separation. These fluids are suitable for demanding applications and are approved and recommended by major hydraulic system manufacturers. Rando HD helps extend asset life by protecting against oxidation, corrosion, and thermal degradation even in high-speed, high-temperature operations.
Reel Power OG Loc-Torus hydraulic connector was designed with the operator in mind. Not only does it match the versatility of other Torus style connectors in a variety of applications, including subsea tree, Jumper, riser, tubing head, and flowline applications, but adds greater reliability by using our patented “lock over-center” design.
Collector ring use and routine maintenanceli jjanedan
The document discusses the use and maintenance of collector rings, also known as slip rings or conductive rings. Collector rings allow the transmission of signals and electrical energy to rotating components. They are commonly used in motors and other applications involving rotating parts. Regular maintenance is important to clean dust and oil from the slip ring surface. Proper contact between the slip ring and brush is also important to ensure good electrical connection and prevent excessive wear.
The document summarizes Flygt 2600 sludge pump series. Key points:
- The pumps are designed to handle sludge and liquids with solids up to 80 mm in size and 20% solids concentration, ensuring maximum uptime.
- Features like a hardened impeller, wear-resistant lining, and large inlet/discharge enable it to handle tough applications.
- It is easy to service with components like a single-cartridge seal and external inspection ports.
The pipe sprayer consists of two air motors. One drives the body around the
central axis and the second drives the cup. The cup motor is set at an angle
into the body, thus as the cup revolves and body rotates a wobble motion is
set up generating a spray pattern inside the pipe. This wobble-
head action produces a reciprocating
fan pattern which enables coating to reach
the back edges formed by pit etc., in corroded
pipes. This avoids having to go through
the pipe in two directions allowing one coat
application.
The document discusses FLSmidth's range of bulk commodity sampling equipment and engineered sampling systems. It describes their falling stream samplers, including ball screw linear samplers, belt drive linear samplers, and Vezin samplers, which are used to sample materials like ores, coal, and slurries. It also mentions their sample collectors, size reduction equipment, and capabilities to design complete sampling stations and systems for customers. FLSmidth aims to provide reliable and representative sampling solutions that conform to international standards for bulk material sampling across various industries.
The document summarizes the features and specifications of the PORTADRILLMINI drill. It is a portable air/water/mud injection rotary drill designed for drilling water wells up to 200 feet faster than other mini drills. Key features include a three-way injection system for air, water or mud, an adjustable pull-down system, and a compact design that allows it to operate and be transported to remote locations. It can drill in spaces as small as 3 feet by 4 feet and is designed for simplicity, serviceability, and versatility.
This document discusses horizontal completion methods for unconventional resources, including plug and perf completions and Halliburton's RapidSuite technologies. The plug and perf completion method involves running and cementing the production string, establishing a flow path at the toe, and then stimulating specific intervals. RapidSuite technologies aim to reduce stimulation time by up to 50% and reduce water usage through systems like the RapidStart initiator sleeve, RapidStage system, and RapidFrac system, which allow for single or multiple entry points. The document also discusses isolation methods, such as swellpacker systems and cementing, and compares the pros and cons of different fracturing techniques like plug and perf versus sliding sleeve systems.
New holland cx8050 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. Diagrams show the layout and components of the hydraulic circuitry.
New holland cr9080 combine harvesters service repair manualjjdjfkkskemme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, crop processing equipment, and more. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
The document discusses Pacific Wedgeplug valves, including:
1) Key features of Wedgeplug valves like simple construction, metal sealing surfaces, and bi-directional sealing capability.
2) Typical applications in refineries and petrochemical plants, including isolation valves in various units.
3) Design details like the plug, body, seats, bonnet, and Wedgetorque operator. Purging and flushing processes are described to enhance performance.
The document discusses HMT's PIVOT MASTERTM flexible joint system and its applications in floating roof drain systems, floating suction systems, and floating skimmer systems for storage tanks. The PIVOT MASTERTM flexible joint provides flexibility while maintaining strength. It consists of a composite hose with stainless steel wire helixes and elastomeric layers secured by steel side plates. The system offers maintenance-free drainage and removal of stored products with compatibility for submerged use and a wide range of stored chemicals.
Jay R. Smith Mfg. Co. offers a full line of trench drain products covering a broad scope of manufacturing, processing, commercial, industrial and residential applications. The Enviro-Flo® Trench Drain Series, Figure Numbers 9930 and 9931, is made from 100% polypropylene, making it light weight, durable and easy to install. The Enviro-Flo® system can consist of 15 sloped and 15 neutral channels for any configuration. The Smith/ACO Trench Drain Series, Figure Numbers 9810 through 9860, is made from precast polymer concrete and fiberglass. The Smith/ACO system is sloped with a radiused bottom. The smooth, uniform interior of these channels offers maximum hydraulic performance. Jay R. Smith Mfg. Co. Drainage Systems includes a wide variety of grate types and materials to meet all installation requirements.
For more information, please visit www.jrsmith.com
Coates Hire - Water Treatment Engineering Solutions Rafi Tchopourian
Coates Hire provides a range of water treatment equipment and engineering services to address various types of water contamination. Their experts can design customized solutions and provide equipment like sediment tanks, siltstoppers, chemical dosing units, and chemically enhanced primary treatment systems. Coates Hire also offers monitoring equipment, data logging, and technical support to ensure water treatment systems meet safety, environmental, and productivity needs.
This document discusses Red Valve's products for wastewater treatment applications. It provides an overview of Red Valve's experience working with wastewater treatment plants and their focus on providing solutions for challenging applications involving slurries. It highlights several of Red Valve's key product lines for influent control, grit removal, sludge handling, effluent discharge and other processes. These include pinch valves, check valves, knife gates, and expansion joints.
HVL Solutions provides cost-effective solutions for valve and pipeline problems in various industries. They offer a range of services to support maintenance, assessment, and repair of oil, gas, and water networks. This includes valve release techniques, refurbishment, packing, bursting and leak repairs, gearbox repairs, penstock repairs, repair collars, cutting pipes, hot tapping, camera inspections, valve flushing and greasing, excavations, and other civil engineering services. Their goal is to help maintain network capacity, efficiency, and service through innovative solutions.
The document discusses the importance of proper valve maintenance for pipeline safety and the environment. It introduces the SafeSeal360 valve greasing system, which helps ensure critical valves are properly lubricated and sealed. The system attaches to valves, uses high pressure to distribute grease evenly around the valve in 360 degrees, and can be operated remotely. This extends valve life and reduces costs of replacement or repairs from leakage. The system is ideal for valves in remote or environmentally sensitive areas.
This document discusses the importance of proper valve maintenance for pipeline safety and the environment. It introduces the SafeSeal360 valve greasing system, which helps ensure critical valves are properly lubricated to maintain integrity. The system reduces valve failure risks and costs compared to replacement. It can be mounted near valves and greased remotely or on-site, extending valve life and reducing leakage and maintenance needs.
The document describes the Ultracept Oil/Water Separation System produced by Jay R. Smith Mfg Co. The system is an above-ground unit that uses a proprietary multi-stage separation process to continuously skim even slight layers of oil from wastewater without the use of coalescing packs or filters. This allows the system to efficiently remove oil and sediment to very low PPM levels. The system also uses a continuous skimming design to ensure negligible water content in the collected waste oil.
Calumex Qxp is an expansive agent designed to be added to ordinary cement to compensate for drying shrinkage in concrete and mortar. It causes expansion within the first 7 days that counters drying shrinkage effects. Using it allows for fewer expansion joints in structures like pre-stressed concrete and industrial floors. It also reduces porosity and makes the concrete matrix denser and more waterproof. The normal addition rate is 4-7% replacement of cement by weight and thorough pre-blending is recommended.
The document describes a new line of spray dry nozzles from Spray Nozzle Engineering. The nozzles feature improved hygiene, easier cleaning and changeouts, longer component life, full axial sealing for leakage control, and FEA design for pressure compliance. Key technologies include concentric clasp alignment for wear parts, seal-in-disc orifice discs, compact hi-flo swirl design, optional drip-pro anti-drip valves, and new check valve sealing face systems. The nozzles are available in push-fit and threaded models with various options to suit different applications and budgets.
SDS drill bits are designed specifically for SDS drills and are held securely in place via grooves in the bit that interact with the drill chuck. The type of SDS drill determines which size bit shank can be used. SDS drill bits hammer within the chuck itself, delivering more power than regular hammer drills where the entire chuck moves. Proper sizing of both the drill bit shank diameter and body diameter are important for optimal performance. Different SDS drill bit types include regular SDS, SDS Plus, SDS-top, and SDS Max, each compatible with specifically sized drills.
Rando HD hydraulic fluids are designed to provide highly durable system protection and maximize equipment protection under severe conditions. They contain advanced additive technologies that deliver excellent anti-wear protection, thermal stability, and water separation. These fluids are suitable for demanding applications and are approved and recommended by major hydraulic system manufacturers. Rando HD helps extend asset life by protecting against oxidation, corrosion, and thermal degradation even in high-speed, high-temperature operations.
Reel Power OG Loc-Torus hydraulic connector was designed with the operator in mind. Not only does it match the versatility of other Torus style connectors in a variety of applications, including subsea tree, Jumper, riser, tubing head, and flowline applications, but adds greater reliability by using our patented “lock over-center” design.
Collector ring use and routine maintenanceli jjanedan
The document discusses the use and maintenance of collector rings, also known as slip rings or conductive rings. Collector rings allow the transmission of signals and electrical energy to rotating components. They are commonly used in motors and other applications involving rotating parts. Regular maintenance is important to clean dust and oil from the slip ring surface. Proper contact between the slip ring and brush is also important to ensure good electrical connection and prevent excessive wear.
The document summarizes Flygt 2600 sludge pump series. Key points:
- The pumps are designed to handle sludge and liquids with solids up to 80 mm in size and 20% solids concentration, ensuring maximum uptime.
- Features like a hardened impeller, wear-resistant lining, and large inlet/discharge enable it to handle tough applications.
- It is easy to service with components like a single-cartridge seal and external inspection ports.
The pipe sprayer consists of two air motors. One drives the body around the
central axis and the second drives the cup. The cup motor is set at an angle
into the body, thus as the cup revolves and body rotates a wobble motion is
set up generating a spray pattern inside the pipe. This wobble-
head action produces a reciprocating
fan pattern which enables coating to reach
the back edges formed by pit etc., in corroded
pipes. This avoids having to go through
the pipe in two directions allowing one coat
application.
The document discusses FLSmidth's range of bulk commodity sampling equipment and engineered sampling systems. It describes their falling stream samplers, including ball screw linear samplers, belt drive linear samplers, and Vezin samplers, which are used to sample materials like ores, coal, and slurries. It also mentions their sample collectors, size reduction equipment, and capabilities to design complete sampling stations and systems for customers. FLSmidth aims to provide reliable and representative sampling solutions that conform to international standards for bulk material sampling across various industries.
The document summarizes the features and specifications of the PORTADRILLMINI drill. It is a portable air/water/mud injection rotary drill designed for drilling water wells up to 200 feet faster than other mini drills. Key features include a three-way injection system for air, water or mud, an adjustable pull-down system, and a compact design that allows it to operate and be transported to remote locations. It can drill in spaces as small as 3 feet by 4 feet and is designed for simplicity, serviceability, and versatility.
This document discusses horizontal completion methods for unconventional resources, including plug and perf completions and Halliburton's RapidSuite technologies. The plug and perf completion method involves running and cementing the production string, establishing a flow path at the toe, and then stimulating specific intervals. RapidSuite technologies aim to reduce stimulation time by up to 50% and reduce water usage through systems like the RapidStart initiator sleeve, RapidStage system, and RapidFrac system, which allow for single or multiple entry points. The document also discusses isolation methods, such as swellpacker systems and cementing, and compares the pros and cons of different fracturing techniques like plug and perf versus sliding sleeve systems.
New holland cx8050 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. Diagrams show the layout and components of the hydraulic circuitry.
New holland cr9080 combine harvesters service repair manualjjdjfkkskemme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, crop processing equipment, and more. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
The document discusses Pacific Wedgeplug valves, including:
1) Key features of Wedgeplug valves like simple construction, metal sealing surfaces, and bi-directional sealing capability.
2) Typical applications in refineries and petrochemical plants, including isolation valves in various units.
3) Design details like the plug, body, seats, bonnet, and Wedgetorque operator. Purging and flushing processes are described to enhance performance.
The document discusses HMT's PIVOT MASTERTM flexible joint system and its applications in floating roof drain systems, floating suction systems, and floating skimmer systems for storage tanks. The PIVOT MASTERTM flexible joint provides flexibility while maintaining strength. It consists of a composite hose with stainless steel wire helixes and elastomeric layers secured by steel side plates. The system offers maintenance-free drainage and removal of stored products with compatibility for submerged use and a wide range of stored chemicals.
Jay R. Smith Mfg. Co. offers a full line of trench drain products covering a broad scope of manufacturing, processing, commercial, industrial and residential applications. The Enviro-Flo® Trench Drain Series, Figure Numbers 9930 and 9931, is made from 100% polypropylene, making it light weight, durable and easy to install. The Enviro-Flo® system can consist of 15 sloped and 15 neutral channels for any configuration. The Smith/ACO Trench Drain Series, Figure Numbers 9810 through 9860, is made from precast polymer concrete and fiberglass. The Smith/ACO system is sloped with a radiused bottom. The smooth, uniform interior of these channels offers maximum hydraulic performance. Jay R. Smith Mfg. Co. Drainage Systems includes a wide variety of grate types and materials to meet all installation requirements.
For more information, please visit www.jrsmith.com
Coates Hire - Water Treatment Engineering Solutions Rafi Tchopourian
Coates Hire provides a range of water treatment equipment and engineering services to address various types of water contamination. Their experts can design customized solutions and provide equipment like sediment tanks, siltstoppers, chemical dosing units, and chemically enhanced primary treatment systems. Coates Hire also offers monitoring equipment, data logging, and technical support to ensure water treatment systems meet safety, environmental, and productivity needs.
This document discusses Red Valve's products for wastewater treatment applications. It provides an overview of Red Valve's experience working with wastewater treatment plants and their focus on providing solutions for challenging applications involving slurries. It highlights several of Red Valve's key product lines for influent control, grit removal, sludge handling, effluent discharge and other processes. These include pinch valves, check valves, knife gates, and expansion joints.
The document discusses wedge wire screens used for reactor internals and solid/liquid filtration in refining and petrochemical processes. It describes various types of internals including support grids, filter elements, outlet collectors, centrepipes, and scallops. These internals are used in axial and radial flow reactors to retain catalysts and media. The document also mentions applications of wedge wire screens in feedstock filtration and ion exchange to remove contaminants without clogging.
Maximize Slip Ring Lifecycle and PerformanceKueblerUSA
Do your slip rings run trouble free for their expected
lifecycle? If you answered “no,” you’re not alone. Many
engineers who work with rotating machines experience slip
ring problems or downtime at some point. The good news
is you can easily keep your slip rings running smoothly for
the long haul by following just three simple steps.
Cartridge check valves (also called non-return valves) are designed for simple installation and offer outstanding performance
inside mating housing. They are valves which only allows water to flow in one direction and prevents backflow.
XHnotion cartridge check valves are not only for water, also for air now. Applications include faucets, showers, valves and
heating systems for residential or commercial installations, as well as pumps,
All the models are 100% tested during production for drip tight operation. Maximum temperature and pressure rating is for
most models 200F(90C)/230psi. The average cracking (opening) pressure of most valves is between 0.25and 0.33 of a psi.
This document provides information about Rotech Systems, a company that manufactures and supplies heavy duty monitoring equipment for bulk handling and processing industries. Some key points:
- Rotech equipment monitors speed, position, and direction of rotating shafts to protect conveyors, elevators, screws, crushers and other machinery.
- It can provide visual/audible alarms and shutdown machinery if speed is reduced by 5-90% (adjustable). This protects against issues like belt slippage or mechanical failure.
- Rotech equipment is designed for harsh industrial environments like quarries and mines. It has tough construction and is maintenance-free.
- Common applications are in food, grain, mining, cement and
Fluid Automation Solutions for Beverage Bottling & Packaging - Brochure Thorne & Derrick UK
ASCO Numatics provides fluid control and fluid power solutions for beverage bottling and packaging processes. They offer a wide range of products including solenoid valves, pneumatic actuators, valve islands, filters and more. Their new G3 fieldbus platform offers flexibility with intuitive controls. ASCO Numatics products are designed for reliability and to reduce costs through easier installation and maintenance. They aim to be a one-stop shop for all fluid automation needs in bottling and packaging lines.
Willscreen is a global leading company that provides customized wedge wire screens and filtration solutions. It was founded in 2001 in Ansan, South Korea and has since expanded to have networks across Asia, Europe, and North America. Willscreen offers a wide range of wedge wire screen products for various industries such as water treatment, petrochemical, food and beverage, and more. In addition to products, it also provides engineering consulting, installation, maintenance, and after-sales support services. Willscreen prides itself on having key certifications for quality management and environmental management systems and innovation.
The removal
of abrasive slurry, an essential operation
in many industries, makes heavy demands
on
slurry pumps. Designed to solve the specific problems
of pumping high-density slurry, 5100/5150,
the latest generation
of submersible slurry pumps
from Xylem, is a cost-effective solution offering
true reliability.
This document provides information on the Franklin DuraSeal plug valve. It describes the valve as having an improved design from previous models with a more durable body and reliable stem seal. The valve seals mechanically without needing sealant and can be easily automated. Parts are interchangeable with previous models and it can be repaired in the field without special tools by removing parts from the top or bottom.
Offshore Loading Stations are designed to provide reliable, safe and efficient fluid transfer in various offshore applications. These systems can improveefficiency and safety on jack-ups, semis, drill ships, TLPs and FPSOs — anyOffshore vessel where fluid and dry products are loaded from a service vessel.Loading stations are safer, more environmentally safe and extend hose life whencompared to present deployment methods. Applications typically include transfer of bulk drilling materials such as bentonite, barite, dry cement and liquids likepotable water, drill water, diesel oil, liquid mud, brine, sludge, dirty drain, etc.
Essae Digitronics - Top Steel Weighbridge Manufacturer and Supplier in IndiaEssaeDigitronics
Our steel weighbridge decks offer higher strength, greater reliability and faster installation than conventional systems. Each load cell of a weighbridge is calibrated & tested to full capacity at the plant before being sent to site.
Twin Process Filtration - Brochure Horizontal Plate Filter (HPF) with scavengerRoy Niekerk
Twin Process Filtration BV was a filtration company in Tiel, The Netherlands operating in 2009 and 2010.
One of their products was the Horizontal Plate Filter (HPF) also known as Sparkler filter, because of the company that invented this filter.
The document describes Renfert's sandblasting equipment, including both stationary and mobile units. It provides details on various models ranging from basic single tank units to more advanced multiple tank and automated recycling units. Key features highlighted include efficient venturi mixing chambers, precisely focused blasting, customizable nozzles, color-coded systems, protective glass, lighting, and connections to additional equipment. The Vario Jet automatic recyclable blaster is specifically discussed for its cost-effectiveness through material recycling and ability to blast multiple items simultaneously in both automatic and manual modes.
"This brand new Powerpoint Presentation details the types, benefits, and applications of the Smith Drainage Systems Trench Drains. This overview of the product line is an excellent resource tool for anyone interested in our trench drains."
provided on the valve body to
This document discusses Expert Knife Gate Valves manufactured by EXPERT, an Indian company established in 1981. It provides an overview of the company's strengths including its experience, product range, manufacturing capabilities, and customer-focused approach. The document then describes features and applications of Expert Knife Gate Valves, which are designed for isolation, on-off, and throttling applications in industries such as pulp and paper, cement, mining, and more. Technical details are also provided on valve body materials and construction, gates, stems, glands, and available actuators.
2. 2
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
Table of Contents
About Slot Drain® .......................................................................................................................3
Benefits of Using Slot Drain®......................................................................................................4
Easy to Clean...................................................................................................................5
Sanitary............................................................................................................................6
Safety...............................................................................................................................7
Durable ............................................................................................................................8
Applications ................................................................................................................................9
Installation.................................................................................................................................10
Retrofit ......................................................................................................................................11
Engineering Specifications........................................................................................................12
Stainless/Galvanized Steel............................................................................................12
Fiberglass Body ............................................................................................................13
Catch Basin...................................................................................................................14
Contact Us................................................................................................................................15
3. 3
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
ABOUT SLOT DRAIN®
When Slot Drain was first introduced, grating, trench drains
and four-sloped floors were standards in the drainage
industry. Slot Drain changed surface drainage forever by
providing the first pre-sloped, prefabricated drain system
available. In doing so we provide an open floor drain system
that is superior in many ways.
Slot Drain is a one-piece, built-in sloped, open floor drain /
surface drain system with a linear slot on top that is unlike
anything else. The linear slot eliminates the need for grating,
making it the most durable, sanitary and cost effective
drainage system available.
It’s applicable wherever floor or ground surfaces are subject
to fluids, or have frequent cleaning requirements. Most Slot
Drain applications are slab on grade, but it can also work in
structural slabs and hollow core slabs. Overall, it replaces
trench drains, with a self-cleaning system, at a significantly
reduced cost.
Slot Drain was patented in 1988 and was the first floor drain
on the market in North America to utilize the innovative
prefabricated, pre-sloped and slotted concept, reducing
construction labor costs. Since then, it has been installed
successfully in hundreds of applications, satisfying both
customers and construction professionals alike.
Four-sloped floors, or contoured floors, are replaced with
effective, low maintenance and low cost, two-sloped floors.
Gone are the metal gratings and metal covers that are a
nuisance to remove and clean. It’s available in fiberglass,
galvanized and stainless steel, with T-Sections, 90° and 45°
elbows to go around corners and other obstacles.
4. 4
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
BENEFITS OF USING SLOT DRAIN®
VERSATILE, DURABLE & SANITARY
A big part of what makes Slot Drain so versatile is that there
is no grating. In addition to common drainage use, this makes
Slot Drain especially suitable wherever grating is not desired.
Some examples would be: areas subject to heavy/high traffic
and food and drink processing facilities with frequent
inspections/cleaning requirements. Part of what makes Slot
Drain suitable for these applications is its durability and
sanitary qualities.
Slot Drain is the most durable surface drain system on the
market. The only parts of the drain exposed are the surface
inlets which are made of stainless steel. The rest of the drain
is embedded into the concrete, so it can handle weight beyond
Load Class F. There is no grating, which deteriorates / breaks
/ bends and needs replacing. This makes it especially suited
for heavy/high traffic areas, such as airport, parkades,
warehouses, truck and rail loading docks.
Slot Drain does not have grating to trap contaminants /
bacteria, etc. A simple hose down of the floor is all that is
required for cleaning. Also, Slot Drain does not absorb
water/contaminants and allows contaminants to be disposed
of in an environmentally manner. Another major benefit of Slot
Drain is that flush valves can be added to the shallow end of
the drain and set on timers or flushed manually in order to
remove any sediment or contaminants automatically.
Slot Drain is sold as a complete system but can be
customized. That means we make it to suit your special
requirements. Adaptations have been made to Slot Drain to
accommodate things such as: depth or flow requirements,
drain length and handling of process water.
5. 5
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
BENEFITS OF USING SLOT DRAIN®
EASY TO CLEAN
A specially designed Cleaning Paddle makes
slot drain easy to clean. The paddle is made of
stainless steel and it is easy to use. A flush valve
can also be added for a self-cleaning solution.
Due to Slot Drain’s precise slope, smooth interior
and the addition of flush valves, it is self-cleaning
and maintenance free.
Flush valves can be added to the drain ends,
with time control in order to automatically flush
the system when needed. If manual cleaning is
ever required, a cleaning paddle is also supplied.
The paddle has the same profile as the Slot
Drain section and are simply inserted through
the slot, then twisted 90 degrees and moved
along the drain.
Since Slot Drain has no grating, you are saved
from removing it then shoveling out the drains
contents, a simple scrub down of the slot is all
that is required.
1. Insert the paddle through the slot
2. Twist 90 degrees
Compared to grated trench drain, Slot Drain is much easier to clean. Grates need to be
pulled out for cleaning which costs a lot more time and labor.
3. Move along the drain
No Grates to Remove
6. 6
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
BENEFITS OF USING SLOT DRAIN®
SANITARY
Slot Drain is the most sanitary and durable
drainage system available. The only parts of the
drain exposed are the surface angles, which are
made of stainless steel, so it’s easy to scrub
down/sanitize.
The rest of the drain is embedded into the
concrete, so it can handle whatever weight you
want to put on it. There is no grating to trap
bacteria or break or bend. This makes it
especially suited for facilities with stringent
sanitary guidelines.
Slot Drain does not absorb water/contaminants
and allows contaminants to be disposed of in an
environmentally friendly manner. Another major
benefit of Slot Drain is that flush valves can be
added to the shallow end of the drain and set on
timers or flushed manually in order to remove
any sediment or contaminants automatically.
Slot Drain does not absorb water/contaminants and allows contamiants to be disposed of in
an environmentally manner. Grates often trap bacteria and they are not suitable for facilities
need to be clean and sanitized.
No Build up of
Bacteria /
Contaminants
7. 7
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
BENEFITS OF USING SLOT DRAIN®
SAFETY
Slot openings are made of
stainless steel. The absence of
gratings allows it to bear weight
beyond Load Class F.
It is a narrow linear system which
is safe for vehicles. Especially in
workplaces with forklifts, where
slot drain systems are much
safer than grated trench drains.
For outdoor applications, slot
drain is friendly to pedestrians,
strollers, wheelchairs, etc.
The absence of gratings allows Slot Drain to bear weight beyond Load
Class F. Slot Drain can be made to ADA Compliant with slot openings
under 13 mm (1/2”).
No Tripping
Hazard
8. 8
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
BENEFITS OF USING SLOT DRAIN®
DURABLE
Slot Drain is sold as a complete system but
adaptations can be made to accommodate
things such as: depth or flow requirements,
drain length and handling of process water.
By modifying Slot Drain to handle process
water, it saves you both time and money by
eliminating extra trenching, piping and
backfilling.
Slot Drain is durable as there is no grating. It
does not deteriorate, break bend or need
replacing. This makes it especially suited for
heavy/high traffic areas, such as airport,
parkades, warehouses, truck and rail loading
docks.
Slot Drain is available to be shipped worldwide and arrives fully assembled,
ready to be installed. Grated trench drains get rusted and for maintenance,
grates have to be pulled out and replaced.
No Rust/Corrosion
9. 9
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
APPLICATIONS
Slot Drain has many applications and is suitable wherever there is spillage to intercept. Slot Drain
has been utilized all over the world in a multitude of applications. Some current installations include:
Food and Beverage Industry – Where trench
drain grating would trap bacteria.
Spill Confinement at Loading Docks for Truck
and Rail
Car Washes
Vehicle Repair Buildings
Parkades
Breweries – Where trench drain grating would
trap bacteria.
Commercial Kitchens
Gang Showers
Computer Floors
Abattoirs – Where trench drain grating would
trap bacteria.
Swimming Pools
Roads
Fish Processing Plants
Hog and Horse Barns
Airports
Wet Coolers
And many more…
10. 10
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
INSTALLATION
Slot Drain is easy to install in both new buildings or as part of a renovation.
Slot Drain is easy to install, reducing
labor costs and minimizing chances of
error.
It takes two men approximately 20 to 30
minutes to install one 15 foot section.
Forming, framing, welding and edging are
all eliminated and screeding is reduced to
two slopes instead of four.
Easy to Install
Instruction Process
1. Tape over the slot.
2. Finished floor sloped to the
drain.
3. & 4. Floor slab shaped to
accommodate drain and
concrete.
5. Peg supports cut off 4” below
finished floor elevation.
6. Anchor setting tabs to top of
pegs securely.
7. After concrete is set, remove
tape and temporary spacers in
slot.
11. 11
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
RETROFIT
Instruction Process
1. Tape the slot.
2. Level and set the drain sections straight to the required height, using J-hooks and 2x4’s.
3. Assemble the sections using the bolt flanges provided.
4. Pour the floor.
5. Remove tape, J-hooks, 2x4’s and spacers in the slot. Grind off spot welds to produce a smooth
unobstructed slot.
Slot Drain may be customized to replace an existing
trench drain or pit drain or for new drain installation
in an existing floor.
Again, the principal of Slot Drain is that it is simple
and easy to install. For retrofit installation, that
process is simplified as well. Just cut out where the
drain is to be installed, lay the drain down in the pit,
using 2 x 4’s to keep it suspended and level with the
existing floor, then pour the concrete.
Retrofit section set, ready for
pour.
Pit and Drain Retrofit Finished Product
Drain sections arrive fully assembled and ready to
install. No grating to screw on, no anchors or drains
to weld, simply bolt the drain ends together, then
pour your floor.
The surface inlet angles which form the
slot are used as a screed and the
concrete finishing machine trowels right
over it.
12. 12
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
Section Invert Shallow Invert Deep
102 8 8 5/8
203 8 5/8 9 1/4
304 9 1/4 9 7/8
405 9 7/8 10 1/2
506 10 1/2 11 1/8
607 11 1/8 11 3/4
708 11 3/4 12 3/8
809 12 3/8 13
Size Flow Rates
1/2 0.026 (CFS) and 11.4 (GPM)
1 0.040 (CFS) and 18 (GPM)
1 1/2 0.074(CFS) and 33 (GPM)
ENGINEERING SPECIFICATION
Dimensions
Slot Drain Opennings
(Capacities are per ft. of slot)
STAINLESS/GALVANIZED STEEL
T304 Stainless Steel Drain Channels are
constructed as 9’6” long, 6” wide, and are
available in 0.5”, 1” and 1 ¼ ” wide throat
openings.
Drain bodies are either made of T304
Stainless Steel or galvanized sheet, both with
stainless steel interlocking ends, and
radiused bottom. The surfacing areas and
drain frame is made from T304 Stainless
steel.
Drain channels are built with a .5% built-in
slope and inverts commence at 5.5” to
unlimited length. End caps and catch basins
complement the channels. End outlets,
bottom outlets, and side outlets shall be
available in 2”, 3”, 4” and 6” diameters.
13. 13
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
Section Invert Shallow Invert Deep
102 5 1/2 6 1/2
203 6 1/2 7 5/8
304 7 5/8 8 1/2
405 8 1/2 9 1/2
506 9 1/2 10 3/8
607 10 3/8 11 1/4
708 11 1/4 12 1/8
809 12 1/8 13
Size Flow Rates
1/2 0.026 (CFS) and 11.4 (GPM)
1 0.040 (CFS) and 18 (GPM)
1 1/2 0.074 (CFS) and 33 (GPM)
ENGINEERING SPECIFICATION
Dimensions
Slot Drain Opennings
(Capacities are per ft. of slot)
FIBERGLASS
Drain Channels are constructed as 15’
long, 6” wide, and are available in .5”, 1”
and 1 ¼” wide throat openings.
Drain bodies are made of Fiber
Reinforced fiberglass, with interlocking
ends, and radiused bottom. The
surfacing areas and drain frame is made
from T304 Stainless steel.
Drain channels are built with a .5% built-
in slope and inverts commence at 5.5” to
unlimited length. End caps and catch
basins complement the channels. End
outlets, bottom outlets, and side outlets
shall be available in 2”, 3”, 4” and 6”
diameters.
Inserts for flushing are an optional item.
14. 14
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
Section Measurement
Stainless/ Fiberglass
Galvanized
Top Width 12” 12”
Top Length 12” 12”
Bottom Width 13” 10-12”
Bottom Length 13” 10-12”
Height 20” 20”
Outlet Height 4” or 6” 4” or 6”
Outer edge of frame 15” 14”
ENGINEERING SPECIFICATION
DimensionsCATCH BASIN
Catch Basins are constructed from
either fiberglass, galvanized steel or
stainless steel as 12”X12”X20” deep,
and are available with 4”, and 6” outlets.
Basins come with a reinforced cover and
can withstand heavy traffic loads.
The exposed surface of the Catch Basin
frames are made from T304 stainless
steel. They have rebar tie-ins for easy
installation.
Custom sizes are available on request.
15. 15
Toll free: (855) 497-7508 info@slotdrainsystems.com www.slotdrainsystems.com
CONTACT US
THE ORIGINAL PRE-SLOPED,
PREFABRICATED, OPEN
FLOOR/SURFACE DRAIN
SLOT DRAIN SYSTEMS LTD.
A division of Specialloy Industries
Leader in Linear Drain Solutions
Toll free: (855) 497-7508
Fax: (204) 775-2324
E-mail:
info@slotdrainsystems.com
Website:
www.slotdrainsystems.com